From: Álvaro Fernández Rojas Date: Tue, 2 Mar 2021 19:19:30 +0000 (+0100) Subject: bmips: backport accepted pinctrl patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=08d8a3646b938a22c5dc312bb73bc1d81c00f992;p=openwrt%2Fstaging%2Fneocturne.git bmips: backport accepted pinctrl patches These patches have been accepted for linux v5.13. External interrupts not supported for now. Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/bmips/dts/bcm63168-comtrend-vr-3032u.dts b/target/linux/bmips/dts/bcm63168-comtrend-vr-3032u.dts index 1a0226f3c3..e2c05f9e6f 100644 --- a/target/linux/bmips/dts/bcm63168-comtrend-vr-3032u.dts +++ b/target/linux/bmips/dts/bcm63168-comtrend-vr-3032u.dts @@ -21,14 +21,14 @@ reset { label = "reset"; - gpios = <&pinctrl 32 GPIO_ACTIVE_LOW>; + gpios = <&gpio 32 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; wps { label = "wps"; - gpios = <&pinctrl 33 GPIO_ACTIVE_LOW>; + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; diff --git a/target/linux/bmips/dts/bcm6318.dtsi b/target/linux/bmips/dts/bcm6318.dtsi index 6064c9ac4c..9f613ad47a 100644 --- a/target/linux/bmips/dts/bcm6318.dtsi +++ b/target/linux/bmips/dts/bcm6318.dtsi @@ -142,110 +142,115 @@ }; }; - gpio: syscon@10000080 { - compatible = "syscon", "simple-mfd"; + gpio_cntl: syscon@10000080 { + compatible = "brcm,bcm6318-gpio-sysctl", + "syscon", "simple-mfd"; reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; native-endian; - pinctrl: pin-controller { - compatible = "brcm,bcm6318-pinctrl"; + gpio: gpio@0 { + compatible = "brcm,bcm6318-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 50>; #gpio-cells = <2>; + }; - interrupts-extended = <&ext_intc 0 0>, - <&ext_intc 1 0>; - interrupt-names = "gpio33", - "gpio34"; + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6318-pinctrl"; + reg = <0x18 0x10>, <0x54 0x18>; - pinctrl_ephy0_spd_led: ephy0_spd_led { + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { function = "ephy0_spd_led"; pins = "gpio0"; }; - pinctrl_ephy1_spd_led: ephy1_spd_led { + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { function = "ephy1_spd_led"; pins = "gpio1"; }; - pinctrl_ephy2_spd_led: ephy2_spd_led { + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { function = "ephy2_spd_led"; pins = "gpio2"; }; - pinctrl_ephy3_spd_led: ephy3_spd_led { + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { function = "ephy3_spd_led"; pins = "gpio3"; }; - pinctrl_ephy0_act_led: ephy0_act_led { + pinctrl_ephy0_act_led: ephy0_act_led-pins { function = "ephy0_act_led"; pins = "gpio4"; }; - pinctrl_ephy1_act_led: ephy1_act_led { + pinctrl_ephy1_act_led: ephy1_act_led-pins { function = "ephy1_act_led"; pins = "gpio5"; }; - pinctrl_ephy2_act_led: ephy2_act_led { + pinctrl_ephy2_act_led: ephy2_act_led-pins { function = "ephy2_act_led"; pins = "gpio6"; }; - pinctrl_ephy3_act_led: ephy3_act_led { + pinctrl_ephy3_act_led: ephy3_act_led-pins { function = "ephy3_act_led"; pins = "gpio7"; }; - pinctrl_serial_led: serial_led { - pinctrl_serial_led_data: serial_led_data { + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { function = "serial_led_data"; pins = "gpio6"; }; - pinctrl_serial_led_clk: serial_led_clk { + pinctrl_serial_led_clk: serial_led_clk-pins { function = "serial_led_clk"; pins = "gpio7"; }; }; - pinctrl_inet_act_led: inet_act_led { + pinctrl_inet_act_led: inet_act_led-pins { function = "inet_act_led"; pins = "gpio8"; }; - pinctrl_inet_fail_led: inet_fail_led { + pinctrl_inet_fail_led: inet_fail_led-pins { function = "inet_fail_led"; pins = "gpio9"; }; - pinctrl_dsl_led: dsl_led { + pinctrl_dsl_led: dsl_led-pins { function = "dsl_led"; pins = "gpio10"; }; - pinctrl_post_fail_led: post_fail_led { + pinctrl_post_fail_led: post_fail_led-pins { function = "post_fail_led"; pins = "gpio11"; }; - pinctrl_wlan_wps_led: wlan_wps_led { + pinctrl_wlan_wps_led: wlan_wps_led-pins { function = "wlan_wps_led"; pins = "gpio12"; }; - pinctrl_usb_pwron: usb_pwron { + pinctrl_usb_pwron: usb_pwron-pins { function = "usb_pwron"; pins = "gpio13"; }; - pinctrl_usb_device_led: usb_device_led { + pinctrl_usb_device_led: usb_device_led-pins { function = "usb_device_led"; pins = "gpio13"; }; - pinctrl_usb_active: usb_active { + pinctrl_usb_active: usb_active-pins { function = "usb_active"; pins = "gpio40"; }; diff --git a/target/linux/bmips/dts/bcm63268.dtsi b/target/linux/bmips/dts/bcm63268.dtsi index d71cef4ccd..2ab14e5a33 100644 --- a/target/linux/bmips/dts/bcm63268.dtsi +++ b/target/linux/bmips/dts/bcm63268.dtsi @@ -153,131 +153,132 @@ #reset-cells = <1>; }; - gpio: syscon@100000c0 { - compatible = "syscon", "simple-mfd"; + gpio_cntl: syscon@100000c0 { + compatible = "brcm,bcm63268-gpio-sysctl", + "syscon", "simple-mfd"; reg = <0x100000c0 0x80>; + ranges = <0 0x100000c0 0x80>; native-endian; - pinctrl: pin-controller { - compatible = "brcm,bcm63268-pinctrl"; + gpio: gpio@0 { + compatible = "brcm,bcm63268-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 52>; #gpio-cells = <2>; + }; + + pinctrl: pinctrl@10 { + compatible = "brcm,bcm63268-pinctrl"; + reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>; - interrupts-extended = <&ext_intc 0 0>, - <&ext_intc 1 0>, - <&ext_intc 2 0>, - <&ext_intc 3 0>; - interrupt-names = "gpio32", - "gpio33", - "gpio34", - "gpio35"; - - pinctrl_serial_led: serial_led { - pinctrl_serial_led_clk: serial_led_clk { + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { function = "serial_led_clk"; pins = "gpio0"; }; - pinctrl_serial_led_data: serial_led_data { + pinctrl_serial_led_data: serial_led_data-pins { function = "serial_led_data"; pins = "gpio1"; }; }; - pinctrl_hsspi_cs4: hsspi_cs4 { + pinctrl_hsspi_cs4: hsspi_cs4-pins { function = "hsspi_cs4"; pins = "gpio16"; }; - pinctrl_hsspi_cs5: hsspi_cs5 { + pinctrl_hsspi_cs5: hsspi_cs5-pins { function = "hsspi_cs5"; pins = "gpio17"; }; - pinctrl_hsspi_cs6: hsspi_cs6 { + pinctrl_hsspi_cs6: hsspi_cs6-pins { function = "hsspi_cs6"; pins = "gpio8"; }; - pinctrl_hsspi_cs7: hsspi_cs7 { + pinctrl_hsspi_cs7: hsspi_cs7-pins { function = "hsspi_cs7"; pins = "gpio9"; }; pinctrl_adsl_spi: adsl_spi { - pinctrl_adsl_spi_miso: adsl_spi_miso { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { function = "adsl_spi_miso"; pins = "gpio18"; }; - pinctrl_adsl_spi_mosi: adsl_spi_mosi { + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { function = "adsl_spi_mosi"; pins = "gpio19"; }; }; - pinctrl_vreq_clk: vreq_clk { + pinctrl_vreq_clk: vreq_clk-pins { function = "vreq_clk"; pins = "gpio22"; }; - pinctrl_pcie_clkreq_b: pcie_clkreq_b { + pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins { function = "pcie_clkreq_b"; pins = "gpio23"; }; - pinctrl_robosw_led_clk: robosw_led_clk { + pinctrl_robosw_led_clk: robosw_led_clk-pins { function = "robosw_led_clk"; pins = "gpio30"; }; - pinctrl_robosw_led_data: robosw_led_data { + pinctrl_robosw_led_data: robosw_led_data-pins { function = "robosw_led_data"; pins = "gpio31"; }; - pinctrl_nand: nand { + pinctrl_nand: nand-pins { function = "nand"; group = "nand_grp"; }; - pinctrl_gpio35_alt: gpio35_alt { + pinctrl_gpio35_alt: gpio35_alt-pins { function = "gpio35_alt"; pin = "gpio35"; }; - pinctrl_dectpd: dectpd { + pinctrl_dectpd: dectpd-pins { function = "dectpd"; group = "dectpd_grp"; }; - pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 { + pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { function = "vdsl_phy_override_0"; group = "vdsl_phy_override_0_grp"; }; - pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 { + pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { function = "vdsl_phy_override_1"; group = "vdsl_phy_override_1_grp"; }; - pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 { + pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { function = "vdsl_phy_override_2"; group = "vdsl_phy_override_2_grp"; }; - pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 { + pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { function = "vdsl_phy_override_3"; group = "vdsl_phy_override_3_grp"; }; - pinctrl_dsl_gpio8: dsl_gpio8 { + pinctrl_dsl_gpio8: dsl_gpio8-pins { function = "dsl_gpio8"; group = "dsl_gpio8"; }; - pinctrl_dsl_gpio9: dsl_gpio9 { + pinctrl_dsl_gpio9: dsl_gpio9-pins { function = "dsl_gpio9"; group = "dsl_gpio9"; }; diff --git a/target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts b/target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts index 14608fedb1..c10c3ae2fc 100644 --- a/target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts +++ b/target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts @@ -19,7 +19,7 @@ reset { label = "reset"; - gpios = <&pinctrl 23 GPIO_ACTIVE_LOW>; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; diff --git a/target/linux/bmips/dts/bcm6328.dtsi b/target/linux/bmips/dts/bcm6328.dtsi index 6ca7e4d9a6..c8e9138ccb 100644 --- a/target/linux/bmips/dts/bcm6328.dtsi +++ b/target/linux/bmips/dts/bcm6328.dtsi @@ -145,99 +145,100 @@ }; }; - gpio: syscon@10000080 { - compatible = "syscon", "simple-mfd"; + gpio_cntl: syscon@10000080 { + compatible = "brcm,bcm6328-gpio-sysctl", + "syscon", "simple-mfd"; reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; native-endian; - pinctrl: pin-controller { - compatible = "brcm,bcm6328-pinctrl"; + gpio: gpio@0 { + compatible = "brcm,bcm6328-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6328-pinctrl"; + reg = <0x18 0x10>; - interrupts-extended = <&ext_intc 3 0>, - <&ext_intc 2 0>, - <&ext_intc 1 0>, - <&ext_intc 0 0>; - interrupt-names = "gpio12", - "gpio15", - "gpio23", - "gpio24"; - - pinctrl_serial_led: serial_led { - pinctrl_serial_led_data: serial_led_data { + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { function = "serial_led_data"; pins = "gpio6"; }; - pinctrl_serial_led_clk: serial_led_clk { + pinctrl_serial_led_clk: serial_led_clk-pins { function = "serial_led_clk"; pins = "gpio7"; }; }; - pinctrl_inet_act_led: inet_act_led { + pinctrl_inet_act_led: inet_act_led-pins { function = "inet_act_led"; pins = "gpio11"; }; - pinctrl_pcie_clkreq: pcie_clkreq { + pinctrl_pcie_clkreq: pcie_clkreq-pins { function = "pcie_clkreq"; pins = "gpio16"; }; - pinctrl_ephy0_spd_led: ephy0_spd_led { + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { function = "led"; pins = "gpio17"; }; - pinctrl_ephy1_spd_led: ephy1_spd_led { + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { function = "led"; pins = "gpio18"; }; - pinctrl_ephy2_spd_led: ephy2_spd_led { + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { function = "led"; pins = "gpio19"; }; - pinctrl_ephy3_spd_led: ephy3_spd_led { + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { function = "led"; pins = "gpio20"; }; - pinctrl_ephy0_act_led: ephy0_act_led { + pinctrl_ephy0_act_led: ephy0_act_led-pins { function = "ephy0_act_led"; pins = "gpio25"; }; - pinctrl_ephy1_act_led: ephy1_act_led { + pinctrl_ephy1_act_led: ephy1_act_led-pins { function = "ephy1_act_led"; pins = "gpio26"; }; - pinctrl_ephy2_act_led: ephy2_act_led { + pinctrl_ephy2_act_led: ephy2_act_led-pins { function = "ephy2_act_led"; pins = "gpio27"; }; - pinctrl_ephy3_act_led: ephy3_act_led { + pinctrl_ephy3_act_led: ephy3_act_led-pins { function = "ephy3_act_led"; pins = "gpio28"; }; - pinctrl_hsspi_cs1: hsspi_cs1 { + pinctrl_hsspi_cs1: hsspi_cs1-pins { function = "hsspi_cs1"; pins = "hsspi_cs1"; }; - pinctrl_usb_port1_device: usb_port1_device { + pinctrl_usb_port1_device: usb_port1_device-pins { function = "usb_device_port"; pins = "usb_port1"; }; - pinctrl_usb_port1_host: usb_port1_host { + pinctrl_usb_port1_host: usb_port1_host-pins { function = "usb_host_port"; pins = "usb_port1"; }; diff --git a/target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts b/target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts index 65b4480ee1..9658e2abca 100644 --- a/target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts +++ b/target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts @@ -23,28 +23,28 @@ help { label = "help"; - gpios = <&pinctrl 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; wlan { label = "wlan"; - gpios = <&pinctrl 9 GPIO_ACTIVE_LOW>; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; restart { label = "restart"; - gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; reset { label = "reset"; - gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; @@ -55,68 +55,68 @@ led@0 { label = "red:message"; - gpios = <&pinctrl 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; }; hspa_red: led@1 { label = "red:hspa"; - gpios = <&pinctrl 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; dsl_red: led@2 { label = "red:dsl"; - gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; }; power_red: led@3 { label = "red:power"; - gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; led@6 { label = "all"; - gpios = <&pinctrl 6 GPIO_ACTIVE_LOW>; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; default-state = "on"; }; led@12 { label = "green:lan1"; - gpios = <&pinctrl 12 GPIO_ACTIVE_LOW>; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; led@13 { label = "red:lan1"; - gpios = <&pinctrl 13 GPIO_ACTIVE_LOW>; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; led@15 { label = "green:lan2"; - gpios = <&pinctrl 15 GPIO_ACTIVE_LOW>; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; led@22 { label = "red:lan2"; - gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; }; led@23 { label = "green:lan3"; - gpios = <&pinctrl 23 GPIO_ACTIVE_LOW>; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; }; led@26 { label = "red:lan3"; - gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>; + gpios = <&gpio 26 GPIO_ACTIVE_LOW>; }; led@27 { label = "green:lan4"; - gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; }; led@28 { label = "red:lan4"; - gpios = <&pinctrl 28 GPIO_ACTIVE_LOW>; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/bmips/dts/bcm6358.dtsi b/target/linux/bmips/dts/bcm6358.dtsi index 3ebbf74613..34334df9ba 100644 --- a/target/linux/bmips/dts/bcm6358.dtsi +++ b/target/linux/bmips/dts/bcm6358.dtsi @@ -157,71 +157,68 @@ timeout-sec = <30>; }; - gpio: syscon@fffe0080 { - compatible = "syscon", "simple-mfd"; + gpio_cntl: syscon@fffe0080 { + compatible = "brcm,bcm6358-gpio-sysctl", + "syscon", "simple-mfd"; reg = <0xfffe0080 0x50>; + ranges = <0 0xfffe0080 0x80>; native-endian; - pinctrl: pin-controller { - compatible = "brcm,bcm6358-pinctrl"; + gpio: gpio@0 { + compatible = "brcm,bcm6358-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 40>; #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6358-pinctrl"; + reg = <0x18 0x4>; - interrupts-extended = <&ext_intc1 0 0>, - <&ext_intc1 1 0>, - <&ext_intc0 0 0>, - <&ext_intc0 1 0>, - <&ext_intc0 2 0>, - <&ext_intc0 3 0>; - interrupt-names = "gpio32", - "gpio33", - "gpio34", - "gpio35", - "gpio36", - "gpio37"; - - pinctrl_ebi_cs: ebi_cs { + pinctrl_ebi_cs: ebi_cs-pins { function = "ebi_cs"; groups = "ebi_cs_grp"; }; - pinctrl_uart1: uart1 { + pinctrl_uart1: uart1-pins { function = "uart1"; groups = "uart1_grp"; }; - pinctrl_serial_led: serial_led { + pinctrl_serial_led: serial_led-pins { function = "serial_led"; groups = "serial_led_grp"; }; - pinctrl_legacy_led: legacy_led { + pinctrl_legacy_led: legacy_led-pins { function = "legacy_led"; groups = "legacy_led_grp"; }; - pinctrl_led: led { + pinctrl_led: led-pins { function = "led"; groups = "led_grp"; }; - pinctrl_spi_cs_23: spi_cs { + pinctrl_spi_cs_23: spi_cs-pins { function = "spi_cs"; groups = "spi_cs_grp"; }; - pinctrl_utopia: utopia { + pinctrl_utopia: utopia-pins { function = "utopia"; groups = "utopia_grp"; }; - pinctrl_pwm_syn_clk: pwm_syn_clk { + pinctrl_pwm_syn_clk: pwm_syn_clk-pins { function = "pwm_syn_clk"; groups = "pwm_syn_clk_grp"; }; - pinctrl_sys_irq: sys_irq { + pinctrl_sys_irq: sys_irq-pins { function = "sys_irq"; groups = "sys_irq_grp"; }; diff --git a/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts b/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts index 52000ba487..e4c7c7b3cc 100644 --- a/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts +++ b/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts @@ -23,21 +23,21 @@ wlan { label = "wlan"; - gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; wps { label = "wps"; - gpios = <&pinctrl 25 GPIO_ACTIVE_LOW>; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; reset { label = "reset"; - gpios = <&pinctrl 31 GPIO_ACTIVE_LOW>; + gpios = <&gpio 31 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; @@ -48,12 +48,12 @@ led@28 { label = "green:dsl"; - gpios = <&pinctrl 28 GPIO_ACTIVE_LOW>; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; }; led@34 { label = "red:power"; - gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/target/linux/bmips/dts/bcm6362.dtsi b/target/linux/bmips/dts/bcm6362.dtsi index 04df06c0db..77473c22bb 100644 --- a/target/linux/bmips/dts/bcm6362.dtsi +++ b/target/linux/bmips/dts/bcm6362.dtsi @@ -146,173 +146,174 @@ timeout-sec = <30>; }; - gpio: syscon@10000080 { - compatible = "syscon", "simple-mfd"; + gpio_cntl: syscon@10000080 { + compatible = "brcm,bcm6362-gpio-sysctl", + "syscon", "simple-mfd"; reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; native-endian; - pinctrl: pin-controller { - compatible = "brcm,bcm6362-pinctrl"; + gpio: gpio@0 { + compatible = "brcm,bcm6362-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 48>; #gpio-cells = <2>; + }; - interrupts-extended = <&ext_intc 0 0>, - <&ext_intc 1 0>, - <&ext_intc 2 0>, - <&ext_intc 3 0>; - interrupt-names = "gpio24", - "gpio25", - "gpio26", - "gpio27"; + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6362-pinctrl"; + reg = <0x18 0x10>, <0x38 0x4>; - pinctrl_usb_device_led: usb_device_led { + pinctrl_usb_device_led: usb_device_led-pins { function = "usb_device_led"; pins = "gpio0"; }; - pinctrl_sys_irq: sys_irq { + pinctrl_sys_irq: sys_irq-pins { function = "sys_irq"; pins = "gpio1"; }; - pinctrl_serial_led: serial_led { - pinctrl_serial_led_clk: serial_led_clk { + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { function = "serial_led_clk"; pins = "gpio2"; }; - pinctrl_serial_led_data: serial_led_data { + pinctrl_serial_led_data: serial_led_data-pins { function = "serial_led_data"; pins = "gpio3"; }; }; - pinctrl_robosw_led_data: robosw_led_data { + pinctrl_robosw_led_data: robosw_led_data-pins { function = "robosw_led_data"; pins = "gpio4"; }; - pinctrl_robosw_led_clk: robosw_led_clk { + pinctrl_robosw_led_clk: robosw_led_clk-pins { function = "robosw_led_clk"; pins = "gpio5"; }; - pinctrl_robosw_led0: robosw_led0 { + pinctrl_robosw_led0: robosw_led0-pins { function = "robosw_led0"; pins = "gpio6"; }; - pinctrl_robosw_led1: robosw_led1 { + pinctrl_robosw_led1: robosw_led1-pins { function = "robosw_led1"; pins = "gpio7"; }; - pinctrl_inet_led: inet_led { + pinctrl_inet_led: inet_led-pins { function = "inet_led"; pins = "gpio8"; }; - pinctrl_spi_cs2: spi_cs2 { + pinctrl_spi_cs2: spi_cs2-pins { function = "spi_cs2"; pins = "gpio9"; }; - pinctrl_spi_cs3: spi_cs3 { + pinctrl_spi_cs3: spi_cs3-pins { function = "spi_cs3"; pins = "gpio10"; }; - pinctrl_ntr_pulse: ntr_pulse { + pinctrl_ntr_pulse: ntr_pulse-pins { function = "ntr_pulse"; pins = "gpio11"; }; - pinctrl_uart1_scts: uart1_scts { + pinctrl_uart1_scts: uart1_scts-pins { function = "uart1_scts"; pins = "gpio12"; }; - pinctrl_uart1_srts: uart1_srts { + pinctrl_uart1_srts: uart1_srts-pins { function = "uart1_srts"; pins = "gpio13"; }; - pinctrl_uart1: uart1 { - pinctrl_uart1_sdin: uart1_sdin { + pinctrl_uart1: uart1-pins { + pinctrl_uart1_sdin: uart1_sdin-pins { function = "uart1_sdin"; pins = "gpio14"; }; - pinctrl_uart1_sdout: uart1_sdout { + pinctrl_uart1_sdout: uart1_sdout-pins { function = "uart1_sdout"; pins = "gpio15"; }; }; - pinctrl_adsl_spi: adsl_spi { - pinctrl_adsl_spi_miso: adsl_spi_miso { + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { function = "adsl_spi_miso"; pins = "gpio16"; }; - pinctrl_adsl_spi_mosi: adsl_spi_mosi { + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { function = "adsl_spi_mosi"; pins = "gpio17"; }; - pinctrl_adsl_spi_clk: adsl_spi_clk { + pinctrl_adsl_spi_clk: adsl_spi_clk-pins { function = "adsl_spi_clk"; pins = "gpio18"; }; - pinctrl_adsl_spi_cs: adsl_spi_cs { + pinctrl_adsl_spi_cs: adsl_spi_cs-pins { function = "adsl_spi_cs"; pins = "gpio19"; }; }; - pinctrl_ephy0_led: ephy0_led { + pinctrl_ephy0_led: ephy0_led-pins { function = "ephy0_led"; pins = "gpio20"; }; - pinctrl_ephy1_led: ephy1_led { + pinctrl_ephy1_led: ephy1_led-pins { function = "ephy1_led"; pins = "gpio21"; }; - pinctrl_ephy2_led: ephy2_led { + pinctrl_ephy2_led: ephy2_led-pins { function = "ephy2_led"; pins = "gpio22"; }; - pinctrl_ephy3_led: ephy3_led { + pinctrl_ephy3_led: ephy3_led-pins { function = "ephy3_led"; pins = "gpio23"; }; - pinctrl_ext_irq0: ext_irq0 { + pinctrl_ext_irq0: ext_irq0-pins { function = "ext_irq0"; pins = "gpio24"; }; - pinctrl_ext_irq1: ext_irq1 { + pinctrl_ext_irq1: ext_irq1-pins { function = "ext_irq1"; pins = "gpio25"; }; - pinctrl_ext_irq2: ext_irq2 { + pinctrl_ext_irq2: ext_irq2-pins { function = "ext_irq2"; pins = "gpio26"; }; - pinctrl_ext_irq3: ext_irq3 { + pinctrl_ext_irq3: ext_irq3-pins { function = "ext_irq3"; pins = "gpio27"; }; - pinctrl_nand: nand { + pinctrl_nand: nand-pins { function = "nand"; group = "nand_grp"; }; diff --git a/target/linux/bmips/dts/bcm6368-comtrend-vr-3025u.dts b/target/linux/bmips/dts/bcm6368-comtrend-vr-3025u.dts index 6466cb3aca..4c00df32b9 100644 --- a/target/linux/bmips/dts/bcm6368-comtrend-vr-3025u.dts +++ b/target/linux/bmips/dts/bcm6368-comtrend-vr-3025u.dts @@ -19,7 +19,7 @@ reset { label = "reset"; - gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; @@ -30,27 +30,27 @@ led@2 { label = "green:dsl"; - gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; }; led@5 { label = "green:internet"; - gpios = <&pinctrl 5 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; }; led_power_green: led@22 { label = "green:power"; - gpios = <&pinctrl 22 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; }; led_power_red: led@24 { label = "red:power"; - gpios = <&pinctrl 24 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; }; led@31 { label = "red:internet"; - gpios = <&pinctrl 31 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/bmips/dts/bcm6368.dtsi b/target/linux/bmips/dts/bcm6368.dtsi index afdf3c5dc0..b50a572fd0 100644 --- a/target/linux/bmips/dts/bcm6368.dtsi +++ b/target/linux/bmips/dts/bcm6368.dtsi @@ -148,198 +148,190 @@ timeout-sec = <30>; }; - gpio: syscon@10000080 { - compatible = "syscon", "simple-mfd"; + gpio_cntl: syscon@10000080 { + compatible = "brcm,bcm6368-gpio-sysctl", + "syscon", "simple-mfd"; reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; native-endian; - pinctrl: pin-controller { - compatible = "brcm,bcm6368-pinctrl"; + gpio: gpio@0 { + compatible = "brcm,bcm6368-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 38>; #gpio-cells = <2>; + }; - interrupts-extended = <&ext_intc1 0 0>, - <&ext_intc1 1 0>, - <&ext_intc0 0 0>, - <&ext_intc0 1 0>, - <&ext_intc0 2 0>, - <&ext_intc0 3 0>; - interrupt-names = "gpio32", - "gpio33", - "gpio34", - "gpio35", - "gpio36", - "gpio37"; - - pinctrl_analog_afe_0: analog_afe_0 { + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6368-pinctrl"; + reg = <0x18 0x4>, <0x38 0x4>; + + pinctrl_analog_afe_0: analog_afe_0-pins { function = "analog_afe_0"; pins = "gpio0"; }; - pinctrl_analog_afe_1: analog_afe_1 { + pinctrl_analog_afe_1: analog_afe_1-pins { function = "analog_afe_1"; pins = "gpio1"; }; - pinctrl_sys_irq: sys_irq { + pinctrl_sys_irq: sys_irq-pins { function = "sys_irq"; pins = "gpio2"; }; - pinctrl_serial_led: serial_led { - pinctrl_serial_led_data: serial_led_data { + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { function = "serial_led_data"; pins = "gpio3"; }; - pinctrl_serial_led_clk: serial_led_clk { + pinctrl_serial_led_clk: serial_led_clk-pins { function = "serial_led_clk"; pins = "gpio4"; }; }; - pinctrl_inet_led: inet_led { + pinctrl_inet_led: inet_led-pins { function = "inet_led"; pins = "gpio5"; }; - pinctrl_ephy0_led: ephy0_led { + pinctrl_ephy0_led: ephy0_led-pins { function = "ephy0_led"; pins = "gpio6"; }; - pinctrl_ephy1_led: ephy1_led { + pinctrl_ephy1_led: ephy1_led-pins { function = "ephy1_led"; pins = "gpio7"; }; - pinctrl_ephy2_led: ephy2_led { + pinctrl_ephy2_led: ephy2_led-pins { function = "ephy2_led"; pins = "gpio8"; }; - pinctrl_ephy3_led: ephy3_led { + pinctrl_ephy3_led: ephy3_led-pins { function = "ephy3_led"; pins = "gpio9"; }; - pinctrl_robosw_led_data: robosw_led_data { + pinctrl_robosw_led_data: robosw_led_data-pins { function = "robosw_led_data"; pins = "gpio10"; }; - pinctrl_robosw_led_clk: robosw_led_clk { + pinctrl_robosw_led_clk: robosw_led_clk-pins { function = "robosw_led_clk"; pins = "gpio11"; }; - pinctrl_robosw_led0: robosw_led0 { + pinctrl_robosw_led0: robosw_led0-pins { function = "robosw_led0"; pins = "gpio12"; }; - pinctrl_robosw_led1: robosw_led1 { + pinctrl_robosw_led1: robosw_led1-pins { function = "robosw_led1"; pins = "gpio13"; }; - pinctrl_usb_device_led: usb_device_led { + pinctrl_usb_device_led: usb_device_led-pins { function = "usb_device_led"; pins = "gpio14"; }; - pinctrl_pci: pci { - pinctrl_pci_req1: pci_req1 { + pinctrl_pci: pci-pins { + pinctrl_pci_req1: pci_req1-pins { function = "pci_req1"; pins = "gpio16"; }; - pinctrl_pci_gnt1: pci_gnt1 { + pinctrl_pci_gnt1: pci_gnt1-pins { function = "pci_gnt1"; pins = "gpio17"; }; - pinctrl_pci_intb: pci_intb { + pinctrl_pci_intb: pci_intb-pins { function = "pci_intb"; pins = "gpio18"; }; - pinctrl_pci_req0: pci_req0 { + pinctrl_pci_req0: pci_req0-pins { function = "pci_req0"; pins = "gpio19"; }; - pinctrl_pci_gnt0: pci_gnt0 { + pinctrl_pci_gnt0: pci_gnt0-pins { function = "pci_gnt0"; pins = "gpio20"; }; }; - pinctrl_pcmcia: pcmcia { - pinctrl_pcmcia_cd1: pcmcia_cd1 { + pinctrl_pcmcia: pcmcia-pins { + pinctrl_pcmcia_cd1: pcmcia_cd1-pins { function = "pcmcia_cd1"; pins = "gpio22"; }; - pinctrl_pcmcia_cd2: pcmcia_cd2 { + pinctrl_pcmcia_cd2: pcmcia_cd2-pins { function = "pcmcia_cd2"; pins = "gpio23"; }; - pinctrl_pcmcia_vs1: pcmcia_vs1 { + pinctrl_pcmcia_vs1: pcmcia_vs1-pins { function = "pcmcia_vs1"; pins = "gpio24"; }; - pinctrl_pcmcia_vs2: pcmcia_vs2 { + pinctrl_pcmcia_vs2: pcmcia_vs2-pins { function = "pcmcia_vs2"; pins = "gpio25"; }; }; - pinctrl_ebi_cs2: ebi_cs2 { + pinctrl_ebi_cs2: ebi_cs2-pins { function = "ebi_cs2"; pins = "gpio26"; }; - pinctrl_ebi_cs3: ebi_cs3 { + pinctrl_ebi_cs3: ebi_cs3-pins { function = "ebi_cs3"; pins = "gpio27"; }; - pinctrl_spi_cs2: spi_cs2 { + pinctrl_spi_cs2: spi_cs2-pins { function = "spi_cs2"; pins = "gpio28"; }; - pinctrl_spi_cs3: spi_cs3 { + pinctrl_spi_cs3: spi_cs3-pins { function = "spi_cs3"; pins = "gpio29"; }; - pinctrl_spi_cs4: spi_cs4 { + pinctrl_spi_cs4: spi_cs4-pins { function = "spi_cs4"; pins = "gpio30"; }; - pinctrl_spi_cs5: spi_cs5 { + pinctrl_spi_cs5: spi_cs5-pins { function = "spi_cs5"; pins = "gpio31"; }; - pinctrl_uart1: uart1 { + pinctrl_uart1: uart1-pins { function = "uart1"; group = "uart1_grp"; }; }; }; - gpiobasemode: gpiobasemode@100000b8 { - compatible = "brcm,bcm6368-gpiobasemode", "syscon"; - reg = <0x100000b8 0x4>; - }; - leds: led-controller@100000d0 { #address-cells = <1>; #size-cells = <0>; diff --git a/target/linux/bmips/patches-5.10/052-v5.13-gpio-guard-gpiochip_irqchip_add_domain-with-GPIOLIB_.patch b/target/linux/bmips/patches-5.10/052-v5.13-gpio-guard-gpiochip_irqchip_add_domain-with-GPIOLIB_.patch new file mode 100644 index 0000000000..b0093e9216 --- /dev/null +++ b/target/linux/bmips/patches-5.10/052-v5.13-gpio-guard-gpiochip_irqchip_add_domain-with-GPIOLIB_.patch @@ -0,0 +1,45 @@ +From 9c7d24693d864f90b27aad5d15fbfe226c02898b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:02 +0100 +Subject: [PATCH 01/22] gpio: guard gpiochip_irqchip_add_domain() with + GPIOLIB_IRQCHIP +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which results in +a compilation error when trying to build gpio-regmap if CONFIG_GPIOLIB_IRQCHIP +isn't enabled. + +Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()") +Suggested-by: Michael Walle +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Linus Walleij +Reviewed-by: Michael Walle +Acked-by: Bartosz Golaszewski +Link: https://lore.kernel.org/r/20210324081923.20379-2-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + include/linux/gpio/driver.h | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/include/linux/gpio/driver.h ++++ b/include/linux/gpio/driver.h +@@ -637,8 +637,17 @@ int gpiochip_irqchip_add_key(struct gpio + bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gc, + unsigned int offset); + ++#ifdef CONFIG_GPIOLIB_IRQCHIP + int gpiochip_irqchip_add_domain(struct gpio_chip *gc, + struct irq_domain *domain); ++#else ++static inline int gpiochip_irqchip_add_domain(struct gpio_chip *gc, ++ struct irq_domain *domain) ++{ ++ WARN_ON(1); ++ return -EINVAL; ++} ++#endif + + #ifdef CONFIG_LOCKDEP + diff --git a/target/linux/bmips/patches-5.10/053-v5.13-gpio-regmap-set-gpio_chip-of_node.patch b/target/linux/bmips/patches-5.10/053-v5.13-gpio-regmap-set-gpio_chip-of_node.patch new file mode 100644 index 0000000000..58dfaff8bd --- /dev/null +++ b/target/linux/bmips/patches-5.10/053-v5.13-gpio-regmap-set-gpio_chip-of_node.patch @@ -0,0 +1,63 @@ +From d46bf9ec4596654f36245e3b14765bcb422be6ad Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:03 +0100 +Subject: [PATCH 02/22] gpio: regmap: set gpio_chip of_node +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This is needed for properly registering GPIO regmap as a child of a regmap +pin controller. + +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Michael Walle +Reviewed-by: Andy Shevchenko +Acked-by: Bartosz Golaszewski +Link: https://lore.kernel.org/r/20210324081923.20379-3-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + drivers/gpio/gpio-regmap.c | 5 +++++ + include/linux/gpio/regmap.h | 4 ++++ + 2 files changed, 9 insertions(+) + +--- a/drivers/gpio/gpio-regmap.c ++++ b/drivers/gpio/gpio-regmap.c +@@ -254,6 +254,11 @@ struct gpio_regmap *gpio_regmap_register + chip->names = config->names; + chip->label = config->label ?: dev_name(config->parent); + ++#if defined(CONFIG_OF_GPIO) ++ /* gpiolib will use of_node of the parent if chip->of_node is NULL */ ++ chip->of_node = to_of_node(config->fwnode); ++#endif /* CONFIG_OF_GPIO */ ++ + /* + * If our regmap is fast_io we should probably set can_sleep to false. + * Right now, the regmap doesn't save this property, nor is there any +--- a/include/linux/gpio/regmap.h ++++ b/include/linux/gpio/regmap.h +@@ -4,6 +4,7 @@ + #define _LINUX_GPIO_REGMAP_H + + struct device; ++struct fwnode_handle; + struct gpio_regmap; + struct irq_domain; + struct regmap; +@@ -16,6 +17,8 @@ struct regmap; + * @parent: The parent device + * @regmap: The regmap used to access the registers + * given, the name of the device is used ++ * @fwnode: (Optional) The firmware node. ++ * If not given, the fwnode of the parent is used. + * @label: (Optional) Descriptive name for GPIO controller. + * If not given, the name of the device is used. + * @ngpio: Number of GPIOs +@@ -57,6 +60,7 @@ struct regmap; + struct gpio_regmap_config { + struct device *parent; + struct regmap *regmap; ++ struct fwnode_handle *fwnode; + + const char *label; + int ngpio; diff --git a/target/linux/bmips/patches-5.10/054-v5.13-dt-bindings-improve-BCM6345-GPIO-binding-documentati.patch b/target/linux/bmips/patches-5.10/054-v5.13-dt-bindings-improve-BCM6345-GPIO-binding-documentati.patch new file mode 100644 index 0000000000..85b751df05 --- /dev/null +++ b/target/linux/bmips/patches-5.10/054-v5.13-dt-bindings-improve-BCM6345-GPIO-binding-documentati.patch @@ -0,0 +1,163 @@ +From fb9da17bd26552f48cda4f2f658379e7f5860691 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:04 +0100 +Subject: [PATCH 03/22] dt-bindings: improve BCM6345 GPIO binding documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Convert existing BCM6345 GPIO binding documentation to YAML and add binding +documentation for the GPIO controller found in BCM6318, BCM6328, BCM6358, +BCM6362, BCM6368 and BCM63268 SoCs. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-4-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../bindings/gpio/brcm,bcm6345-gpio.txt | 46 ---------- + .../bindings/gpio/brcm,bcm6345-gpio.yaml | 86 +++++++++++++++++++ + 2 files changed, 86 insertions(+), 46 deletions(-) + delete mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt + create mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml + +--- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt ++++ /dev/null +@@ -1,46 +0,0 @@ +-Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers. +- +-These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345 +-are the only ones which don't need a pinctrl driver. +-BCM6338 have 8-bit data and dirout registers, where GPIO state can be read +-and/or written, and the direction changed from input to output. +-BCM6345 have 16-bit data and dirout registers, where GPIO state can be read +-and/or written, and the direction changed from input to output. +- +-Required properties: +- - compatible: should be "brcm,bcm6345-gpio" +- - reg-names: must contain +- "dat" - data register +- "dirout" - direction (output) register +- - reg: address + size pairs describing the GPIO register sets; +- order must correspond with the order of entries in reg-names +- - #gpio-cells: must be set to 2. The first cell is the pin number and +- the second cell is used to specify the gpio polarity: +- 0 = active high +- 1 = active low +- - gpio-controller: Marks the device node as a gpio controller. +- +-Optional properties: +- - native-endian: use native endian memory. +- +-Examples: +- - BCM6338: +- gpio: gpio-controller@fffe0407 { +- compatible = "brcm,bcm6345-gpio"; +- reg-names = "dirout", "dat"; +- reg = <0xfffe0407 1>, <0xfffe040f 1>; +- +- #gpio-cells = <2>; +- gpio-controller; +- }; +- +- - BCM6345: +- gpio: gpio-controller@fffe0406 { +- compatible = "brcm,bcm6345-gpio"; +- reg-names = "dirout", "dat"; +- reg = <0xfffe0406 2>, <0xfffe040a 2>; +- native-endian; +- +- #gpio-cells = <2>; +- gpio-controller; +- }; +--- /dev/null ++++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml +@@ -0,0 +1,86 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6345 GPIO controller ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: |+ ++ Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers. ++ ++ These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345 ++ are the only ones which don't need a pinctrl driver. ++ ++ BCM6338 have 8-bit data and dirout registers, where GPIO state can be read ++ and/or written, and the direction changed from input to output. ++ BCM6345 have 16-bit data and dirout registers, where GPIO state can be read ++ and/or written, and the direction changed from input to output. ++ BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data ++ and dirout registers, where GPIO state can be read and/or written, and the ++ direction changed from input to output. ++ ++properties: ++ compatible: ++ enum: ++ - brcm,bcm6318-gpio ++ - brcm,bcm6328-gpio ++ - brcm,bcm6345-gpio ++ - brcm,bcm6358-gpio ++ - brcm,bcm6362-gpio ++ - brcm,bcm6368-gpio ++ - brcm,bcm63268-gpio ++ ++ gpio-controller: true ++ ++ "#gpio-cells": ++ const: 2 ++ ++ gpio-ranges: ++ maxItems: 1 ++ ++ native-endian: true ++ ++ reg: ++ maxItems: 2 ++ ++ reg-names: ++ items: ++ - const: dirout ++ - const: dat ++ ++required: ++ - compatible ++ - reg ++ - reg-names ++ - gpio-controller ++ - '#gpio-cells' ++ ++additionalProperties: false ++ ++examples: ++ - | ++ gpio@fffe0406 { ++ compatible = "brcm,bcm6345-gpio"; ++ reg-names = "dirout", "dat"; ++ reg = <0xfffe0406 2>, <0xfffe040a 2>; ++ native-endian; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ - | ++ gpio@0 { ++ compatible = "brcm,bcm63268-gpio"; ++ reg-names = "dirout", "dat"; ++ reg = <0x0 0x8>, <0x8 0x8>; ++ ++ gpio-controller; ++ gpio-ranges = <&pinctrl 0 0 52>; ++ #gpio-cells = <2>; ++ }; diff --git a/target/linux/bmips/patches-5.10/055-v5.13-pinctrl-bcm-add-bcm63xx-base-code.patch b/target/linux/bmips/patches-5.10/055-v5.13-pinctrl-bcm-add-bcm63xx-base-code.patch new file mode 100644 index 0000000000..eec8b98a49 --- /dev/null +++ b/target/linux/bmips/patches-5.10/055-v5.13-pinctrl-bcm-add-bcm63xx-base-code.patch @@ -0,0 +1,208 @@ +From 132f95016db0a0a0659e99b471a7d3fd0c60f961 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:05 +0100 +Subject: [PATCH 04/22] pinctrl: bcm: add bcm63xx base code +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add a helper for registering BCM63XX pin controllers. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Link: https://lore.kernel.org/r/20210324081923.20379-5-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/bcm/Kconfig | 7 ++ + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm63xx.c | 109 ++++++++++++++++++++++++++ + drivers/pinctrl/bcm/pinctrl-bcm63xx.h | 43 ++++++++++ + 4 files changed, 160 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.c + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.h + +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -29,6 +29,13 @@ config PINCTRL_BCM2835 + help + Say Y here to enable the Broadcom BCM2835 GPIO driver. + ++config PINCTRL_BCM63XX ++ bool ++ select GENERIC_PINCONF ++ select GPIO_REGMAP ++ select PINCONF ++ select PINMUX ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -3,6 +3,7 @@ + + obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o + obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o ++obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o +--- /dev/null ++++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.c +@@ -0,0 +1,109 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Driver for BCM63xx GPIO unit (pinctrl + GPIO) ++ * ++ * Copyright (C) 2021 Álvaro Fernández Rojas ++ * Copyright (C) 2016 Jonas Gorski ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "pinctrl-bcm63xx.h" ++ ++#define BCM63XX_BANK_SIZE 4 ++ ++#define BCM63XX_DIROUT_REG 0x04 ++#define BCM63XX_DATA_REG 0x0c ++ ++static int bcm63xx_reg_mask_xlate(struct gpio_regmap *gpio, ++ unsigned int base, unsigned int offset, ++ unsigned int *reg, unsigned int *mask) ++{ ++ unsigned int line = offset % BCM63XX_BANK_GPIOS; ++ unsigned int stride = offset / BCM63XX_BANK_GPIOS; ++ ++ *reg = base - stride * BCM63XX_BANK_SIZE; ++ *mask = BIT(line); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcm63xx_gpio_of_match[] = { ++ { .compatible = "brcm,bcm6318-gpio", }, ++ { .compatible = "brcm,bcm6328-gpio", }, ++ { .compatible = "brcm,bcm6358-gpio", }, ++ { .compatible = "brcm,bcm6362-gpio", }, ++ { .compatible = "brcm,bcm6368-gpio", }, ++ { .compatible = "brcm,bcm63268-gpio", }, ++ { /* sentinel */ } ++}; ++ ++static int bcm63xx_gpio_probe(struct device *dev, struct device_node *node, ++ const struct bcm63xx_pinctrl_soc *soc, ++ struct bcm63xx_pinctrl *pc) ++{ ++ struct gpio_regmap_config grc = {0}; ++ ++ grc.parent = dev; ++ grc.fwnode = &node->fwnode; ++ grc.ngpio = soc->ngpios; ++ grc.ngpio_per_reg = BCM63XX_BANK_GPIOS; ++ grc.regmap = pc->regs; ++ grc.reg_dat_base = BCM63XX_DATA_REG; ++ grc.reg_dir_out_base = BCM63XX_DIROUT_REG; ++ grc.reg_set_base = BCM63XX_DATA_REG; ++ grc.reg_mask_xlate = bcm63xx_reg_mask_xlate; ++ ++ return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &grc)); ++} ++ ++int bcm63xx_pinctrl_probe(struct platform_device *pdev, ++ const struct bcm63xx_pinctrl_soc *soc, ++ void *driver_data) ++{ ++ struct device *dev = &pdev->dev; ++ struct bcm63xx_pinctrl *pc; ++ struct device_node *node; ++ int err; ++ ++ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); ++ if (!pc) ++ return -ENOMEM; ++ ++ platform_set_drvdata(pdev, pc); ++ ++ pc->dev = dev; ++ pc->driver_data = driver_data; ++ ++ pc->regs = syscon_node_to_regmap(dev->parent->of_node); ++ if (IS_ERR(pc->regs)) ++ return PTR_ERR(pc->regs); ++ ++ pc->pctl_desc.name = dev_name(dev); ++ pc->pctl_desc.pins = soc->pins; ++ pc->pctl_desc.npins = soc->npins; ++ pc->pctl_desc.pctlops = soc->pctl_ops; ++ pc->pctl_desc.pmxops = soc->pmx_ops; ++ pc->pctl_desc.owner = THIS_MODULE; ++ ++ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); ++ if (IS_ERR(pc->pctl_dev)) ++ return PTR_ERR(pc->pctl_dev); ++ ++ for_each_child_of_node(dev->parent->of_node, node) { ++ if (of_match_node(bcm63xx_gpio_of_match, node)) { ++ err = bcm63xx_gpio_probe(dev, node, soc, pc); ++ if (err) { ++ dev_err(dev, "could not add GPIO chip\n"); ++ of_node_put(node); ++ return err; ++ } ++ } ++ } ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h +@@ -0,0 +1,43 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Copyright (C) 2021 Álvaro Fernández Rojas ++ * Copyright (C) 2016 Jonas Gorski ++ */ ++ ++#ifndef __PINCTRL_BCM63XX_H__ ++#define __PINCTRL_BCM63XX_H__ ++ ++#include ++ ++#define BCM63XX_BANK_GPIOS 32 ++ ++struct bcm63xx_pinctrl_soc { ++ struct pinctrl_ops *pctl_ops; ++ struct pinmux_ops *pmx_ops; ++ ++ const struct pinctrl_pin_desc *pins; ++ unsigned npins; ++ ++ unsigned int ngpios; ++}; ++ ++struct bcm63xx_pinctrl { ++ struct device *dev; ++ struct regmap *regs; ++ ++ struct pinctrl_desc pctl_desc; ++ struct pinctrl_dev *pctl_dev; ++ ++ void *driver_data; ++}; ++ ++static inline unsigned int bcm63xx_bank_pin(unsigned int pin) ++{ ++ return pin % BCM63XX_BANK_GPIOS; ++} ++ ++int bcm63xx_pinctrl_probe(struct platform_device *pdev, ++ const struct bcm63xx_pinctrl_soc *soc, ++ void *driver_data); ++ ++#endif /* __PINCTRL_BCM63XX_H__ */ diff --git a/target/linux/bmips/patches-5.10/056-v5.13-dt-bindings-add-BCM6328-pincontroller-binding-docume.patch b/target/linux/bmips/patches-5.10/056-v5.13-dt-bindings-add-BCM6328-pincontroller-binding-docume.patch new file mode 100644 index 0000000000..af15da971f --- /dev/null +++ b/target/linux/bmips/patches-5.10/056-v5.13-dt-bindings-add-BCM6328-pincontroller-binding-docume.patch @@ -0,0 +1,152 @@ +From 44dbcd8eb08a0febbb46ac7b9331f28a320bdf9a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:06 +0100 +Subject: [PATCH 05/22] dt-bindings: add BCM6328 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in BCM6328 SoCs. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-6-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../pinctrl/brcm,bcm6328-pinctrl.yaml | 127 ++++++++++++++++++ + 1 file changed, 127 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml +@@ -0,0 +1,127 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6328 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Bindings for Broadcom's BCM6328 memory-mapped pin controller. ++ ++properties: ++ compatible: ++ const: brcm,bcm6328-pinctrl ++ ++ reg: ++ maxItems: 1 ++ ++patternProperties: ++ '-pins$': ++ type: object ++ $ref: pinmux-node.yaml# ++ ++ properties: ++ function: ++ enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq, ++ led, ephy0_act_led, ephy1_act_led, ephy2_act_led, ++ ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ] ++ ++ pins: ++ enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19, ++ gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1, ++ usb_port1 ] ++ ++required: ++ - compatible ++ - reg ++ ++additionalProperties: false ++ ++examples: ++ - | ++ pinctrl@18 { ++ compatible = "brcm,bcm6328-pinctrl"; ++ reg = <0x18 0x10>; ++ ++ pinctrl_serial_led: serial_led-pins { ++ pinctrl_serial_led_data: serial_led_data-pins { ++ function = "serial_led_data"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_serial_led_clk: serial_led_clk-pins { ++ function = "serial_led_clk"; ++ pins = "gpio7"; ++ }; ++ }; ++ ++ pinctrl_inet_act_led: inet_act_led-pins { ++ function = "inet_act_led"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_pcie_clkreq: pcie_clkreq-pins { ++ function = "pcie_clkreq"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_ephy0_spd_led: ephy0_spd_led-pins { ++ function = "led"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_ephy1_spd_led: ephy1_spd_led-pins { ++ function = "led"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_ephy2_spd_led: ephy2_spd_led-pins { ++ function = "led"; ++ pins = "gpio19"; ++ }; ++ ++ pinctrl_ephy3_spd_led: ephy3_spd_led-pins { ++ function = "led"; ++ pins = "gpio20"; ++ }; ++ ++ pinctrl_ephy0_act_led: ephy0_act_led-pins { ++ function = "ephy0_act_led"; ++ pins = "gpio25"; ++ }; ++ ++ pinctrl_ephy1_act_led: ephy1_act_led-pins { ++ function = "ephy1_act_led"; ++ pins = "gpio26"; ++ }; ++ ++ pinctrl_ephy2_act_led: ephy2_act_led-pins { ++ function = "ephy2_act_led"; ++ pins = "gpio27"; ++ }; ++ ++ pinctrl_ephy3_act_led: ephy3_act_led-pins { ++ function = "ephy3_act_led"; ++ pins = "gpio28"; ++ }; ++ ++ pinctrl_hsspi_cs1: hsspi_cs1-pins { ++ function = "hsspi_cs1"; ++ pins = "hsspi_cs1"; ++ }; ++ ++ pinctrl_usb_port1_device: usb_port1_device-pins { ++ function = "usb_device_port"; ++ pins = "usb_port1"; ++ }; ++ ++ pinctrl_usb_port1_host: usb_port1_host-pins { ++ function = "usb_host_port"; ++ pins = "usb_port1"; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/057-v5.13-dt-bindings-add-BCM6328-GPIO-sysctl-binding-document.patch b/target/linux/bmips/patches-5.10/057-v5.13-dt-bindings-add-BCM6328-GPIO-sysctl-binding-document.patch new file mode 100644 index 0000000000..3c1e48d300 --- /dev/null +++ b/target/linux/bmips/patches-5.10/057-v5.13-dt-bindings-add-BCM6328-GPIO-sysctl-binding-document.patch @@ -0,0 +1,185 @@ +From 7f9dfaa2afb6bc3481e531c405b05acf6091af29 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:07 +0100 +Subject: [PATCH 06/22] dt-bindings: add BCM6328 GPIO sysctl binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the GPIO sysctl found in BCM6328 SoCs. + +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-7-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../mfd/brcm,bcm6328-gpio-sysctl.yaml | 162 ++++++++++++++++++ + 1 file changed, 162 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml +@@ -0,0 +1,162 @@ ++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6328 GPIO System Controller Device Tree Bindings ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Broadcom BCM6328 SoC GPIO system controller which provides a register map ++ for controlling the GPIO and pins of the SoC. ++ ++properties: ++ "#address-cells": true ++ ++ "#size-cells": true ++ ++ compatible: ++ items: ++ - const: brcm,bcm6328-gpio-sysctl ++ - const: syscon ++ - const: simple-mfd ++ ++ ranges: ++ maxItems: 1 ++ ++ reg: ++ maxItems: 1 ++ ++patternProperties: ++ "^gpio@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../gpio/brcm,bcm6345-gpio.yaml" ++ description: ++ GPIO controller for the SoC GPIOs. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. ++ ++ "^pinctrl@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml" ++ description: ++ Pin controller for the SoC pins. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml. ++ ++required: ++ - "#address-cells" ++ - compatible ++ - ranges ++ - reg ++ - "#size-cells" ++ ++additionalProperties: false ++ ++examples: ++ - | ++ syscon@10000080 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "brcm,bcm6328-gpio-sysctl", "syscon", "simple-mfd"; ++ reg = <0x10000080 0x80>; ++ ranges = <0 0x10000080 0x80>; ++ ++ gpio@0 { ++ compatible = "brcm,bcm6328-gpio"; ++ reg-names = "dirout", "dat"; ++ reg = <0x0 0x8>, <0x8 0x8>; ++ ++ gpio-controller; ++ gpio-ranges = <&pinctrl 0 0 32>; ++ #gpio-cells = <2>; ++ }; ++ ++ pinctrl: pinctrl@18 { ++ compatible = "brcm,bcm6328-pinctrl"; ++ reg = <0x18 0x10>; ++ ++ pinctrl_serial_led: serial_led-pins { ++ pinctrl_serial_led_data: serial_led_data-pins { ++ function = "serial_led_data"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_serial_led_clk: serial_led_clk-pins { ++ function = "serial_led_clk"; ++ pins = "gpio7"; ++ }; ++ }; ++ ++ pinctrl_inet_act_led: inet_act_led-pins { ++ function = "inet_act_led"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_pcie_clkreq: pcie_clkreq-pins { ++ function = "pcie_clkreq"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_ephy0_spd_led: ephy0_spd_led-pins { ++ function = "led"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_ephy1_spd_led: ephy1_spd_led-pins { ++ function = "led"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_ephy2_spd_led: ephy2_spd_led-pins { ++ function = "led"; ++ pins = "gpio19"; ++ }; ++ ++ pinctrl_ephy3_spd_led: ephy3_spd_led-pins { ++ function = "led"; ++ pins = "gpio20"; ++ }; ++ ++ pinctrl_ephy0_act_led: ephy0_act_led-pins { ++ function = "ephy0_act_led"; ++ pins = "gpio25"; ++ }; ++ ++ pinctrl_ephy1_act_led: ephy1_act_led-pins { ++ function = "ephy1_act_led"; ++ pins = "gpio26"; ++ }; ++ ++ pinctrl_ephy2_act_led: ephy2_act_led-pins { ++ function = "ephy2_act_led"; ++ pins = "gpio27"; ++ }; ++ ++ pinctrl_ephy3_act_led: ephy3_act_led-pins { ++ function = "ephy3_act_led"; ++ pins = "gpio28"; ++ }; ++ ++ pinctrl_hsspi_cs1: hsspi_cs1-pins { ++ function = "hsspi_cs1"; ++ pins = "hsspi_cs1"; ++ }; ++ ++ pinctrl_usb_port1_device: usb_port1_device-pins { ++ function = "usb_device_port"; ++ pins = "usb_port1"; ++ }; ++ ++ pinctrl_usb_port1_host: usb_port1_host-pins { ++ function = "usb_host_port"; ++ pins = "usb_port1"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/058-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch b/target/linux/bmips/patches-5.10/058-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch new file mode 100644 index 0000000000..90929d8d1f --- /dev/null +++ b/target/linux/bmips/patches-5.10/058-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch @@ -0,0 +1,459 @@ +From 9bf34ac5ab5805f0a798d40423c05596b7a0cee6 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:08 +0100 +Subject: [PATCH 07/22] pinctrl: add a pincontrol driver for BCM6328 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add a pincontrol driver for BCM6328. BCM6328 supports muxing 32 pins as +GPIOs, as LEDs for the integrated LED controller, or various other +functions. Its pincontrol mux registers also control other aspects, like +switching the second USB port between host and device mode. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Link: https://lore.kernel.org/r/20210324081923.20379-8-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/bcm/Kconfig | 8 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm6328.c | 404 ++++++++++++++++++++++++++ + 3 files changed, 413 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6328.c + +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -36,6 +36,14 @@ config PINCTRL_BCM63XX + select PINCONF + select PINMUX + ++config PINCTRL_BCM6328 ++ bool "Broadcom BCM6328 GPIO driver" ++ depends on (BMIPS_GENERIC || COMPILE_TEST) ++ select PINCTRL_BCM63XX ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM6328 GPIO driver. ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -4,6 +4,7 @@ + obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o + obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o + obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o ++obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o +--- /dev/null ++++ b/drivers/pinctrl/bcm/pinctrl-bcm6328.c +@@ -0,0 +1,404 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Driver for BCM6328 GPIO unit (pinctrl + GPIO) ++ * ++ * Copyright (C) 2021 Álvaro Fernández Rojas ++ * Copyright (C) 2016 Jonas Gorski ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../pinctrl-utils.h" ++ ++#include "pinctrl-bcm63xx.h" ++ ++#define BCM6328_NUM_GPIOS 32 ++ ++#define BCM6328_MODE_REG 0x18 ++#define BCM6328_MUX_HI_REG 0x1c ++#define BCM6328_MUX_LO_REG 0x20 ++#define BCM6328_MUX_OTHER_REG 0x24 ++#define BCM6328_MUX_MASK GENMASK(1, 0) ++ ++struct bcm6328_pingroup { ++ const char *name; ++ const unsigned * const pins; ++ const unsigned num_pins; ++}; ++ ++struct bcm6328_function { ++ const char *name; ++ const char * const *groups; ++ const unsigned num_groups; ++ ++ unsigned mode_val:1; ++ unsigned mux_val:2; ++}; ++ ++static const unsigned int bcm6328_mux[] = { ++ BCM6328_MUX_LO_REG, ++ BCM6328_MUX_HI_REG, ++ BCM6328_MUX_OTHER_REG ++}; ++ ++static const struct pinctrl_pin_desc bcm6328_pins[] = { ++ PINCTRL_PIN(0, "gpio0"), ++ PINCTRL_PIN(1, "gpio1"), ++ PINCTRL_PIN(2, "gpio2"), ++ PINCTRL_PIN(3, "gpio3"), ++ PINCTRL_PIN(4, "gpio4"), ++ PINCTRL_PIN(5, "gpio5"), ++ PINCTRL_PIN(6, "gpio6"), ++ PINCTRL_PIN(7, "gpio7"), ++ PINCTRL_PIN(8, "gpio8"), ++ PINCTRL_PIN(9, "gpio9"), ++ PINCTRL_PIN(10, "gpio10"), ++ PINCTRL_PIN(11, "gpio11"), ++ PINCTRL_PIN(12, "gpio12"), ++ PINCTRL_PIN(13, "gpio13"), ++ PINCTRL_PIN(14, "gpio14"), ++ PINCTRL_PIN(15, "gpio15"), ++ PINCTRL_PIN(16, "gpio16"), ++ PINCTRL_PIN(17, "gpio17"), ++ PINCTRL_PIN(18, "gpio18"), ++ PINCTRL_PIN(19, "gpio19"), ++ PINCTRL_PIN(20, "gpio20"), ++ PINCTRL_PIN(21, "gpio21"), ++ PINCTRL_PIN(22, "gpio22"), ++ PINCTRL_PIN(23, "gpio23"), ++ PINCTRL_PIN(24, "gpio24"), ++ PINCTRL_PIN(25, "gpio25"), ++ PINCTRL_PIN(26, "gpio26"), ++ PINCTRL_PIN(27, "gpio27"), ++ PINCTRL_PIN(28, "gpio28"), ++ PINCTRL_PIN(29, "gpio29"), ++ PINCTRL_PIN(30, "gpio30"), ++ PINCTRL_PIN(31, "gpio31"), ++ ++ /* ++ * No idea where they really are; so let's put them according ++ * to their mux offsets. ++ */ ++ PINCTRL_PIN(36, "hsspi_cs1"), ++ PINCTRL_PIN(38, "usb_p2"), ++}; ++ ++static unsigned gpio0_pins[] = { 0 }; ++static unsigned gpio1_pins[] = { 1 }; ++static unsigned gpio2_pins[] = { 2 }; ++static unsigned gpio3_pins[] = { 3 }; ++static unsigned gpio4_pins[] = { 4 }; ++static unsigned gpio5_pins[] = { 5 }; ++static unsigned gpio6_pins[] = { 6 }; ++static unsigned gpio7_pins[] = { 7 }; ++static unsigned gpio8_pins[] = { 8 }; ++static unsigned gpio9_pins[] = { 9 }; ++static unsigned gpio10_pins[] = { 10 }; ++static unsigned gpio11_pins[] = { 11 }; ++static unsigned gpio12_pins[] = { 12 }; ++static unsigned gpio13_pins[] = { 13 }; ++static unsigned gpio14_pins[] = { 14 }; ++static unsigned gpio15_pins[] = { 15 }; ++static unsigned gpio16_pins[] = { 16 }; ++static unsigned gpio17_pins[] = { 17 }; ++static unsigned gpio18_pins[] = { 18 }; ++static unsigned gpio19_pins[] = { 19 }; ++static unsigned gpio20_pins[] = { 20 }; ++static unsigned gpio21_pins[] = { 21 }; ++static unsigned gpio22_pins[] = { 22 }; ++static unsigned gpio23_pins[] = { 23 }; ++static unsigned gpio24_pins[] = { 24 }; ++static unsigned gpio25_pins[] = { 25 }; ++static unsigned gpio26_pins[] = { 26 }; ++static unsigned gpio27_pins[] = { 27 }; ++static unsigned gpio28_pins[] = { 28 }; ++static unsigned gpio29_pins[] = { 29 }; ++static unsigned gpio30_pins[] = { 30 }; ++static unsigned gpio31_pins[] = { 31 }; ++ ++static unsigned hsspi_cs1_pins[] = { 36 }; ++static unsigned usb_port1_pins[] = { 38 }; ++ ++#define BCM6328_GROUP(n) \ ++ { \ ++ .name = #n, \ ++ .pins = n##_pins, \ ++ .num_pins = ARRAY_SIZE(n##_pins), \ ++ } ++ ++static struct bcm6328_pingroup bcm6328_groups[] = { ++ BCM6328_GROUP(gpio0), ++ BCM6328_GROUP(gpio1), ++ BCM6328_GROUP(gpio2), ++ BCM6328_GROUP(gpio3), ++ BCM6328_GROUP(gpio4), ++ BCM6328_GROUP(gpio5), ++ BCM6328_GROUP(gpio6), ++ BCM6328_GROUP(gpio7), ++ BCM6328_GROUP(gpio8), ++ BCM6328_GROUP(gpio9), ++ BCM6328_GROUP(gpio10), ++ BCM6328_GROUP(gpio11), ++ BCM6328_GROUP(gpio12), ++ BCM6328_GROUP(gpio13), ++ BCM6328_GROUP(gpio14), ++ BCM6328_GROUP(gpio15), ++ BCM6328_GROUP(gpio16), ++ BCM6328_GROUP(gpio17), ++ BCM6328_GROUP(gpio18), ++ BCM6328_GROUP(gpio19), ++ BCM6328_GROUP(gpio20), ++ BCM6328_GROUP(gpio21), ++ BCM6328_GROUP(gpio22), ++ BCM6328_GROUP(gpio23), ++ BCM6328_GROUP(gpio24), ++ BCM6328_GROUP(gpio25), ++ BCM6328_GROUP(gpio26), ++ BCM6328_GROUP(gpio27), ++ BCM6328_GROUP(gpio28), ++ BCM6328_GROUP(gpio29), ++ BCM6328_GROUP(gpio30), ++ BCM6328_GROUP(gpio31), ++ ++ BCM6328_GROUP(hsspi_cs1), ++ BCM6328_GROUP(usb_port1), ++}; ++ ++/* GPIO_MODE */ ++static const char * const led_groups[] = { ++ "gpio0", ++ "gpio1", ++ "gpio2", ++ "gpio3", ++ "gpio4", ++ "gpio5", ++ "gpio6", ++ "gpio7", ++ "gpio8", ++ "gpio9", ++ "gpio10", ++ "gpio11", ++ "gpio12", ++ "gpio13", ++ "gpio14", ++ "gpio15", ++ "gpio16", ++ "gpio17", ++ "gpio18", ++ "gpio19", ++ "gpio20", ++ "gpio21", ++ "gpio22", ++ "gpio23", ++}; ++ ++/* PINMUX_SEL */ ++static const char * const serial_led_data_groups[] = { ++ "gpio6", ++}; ++ ++static const char * const serial_led_clk_groups[] = { ++ "gpio7", ++}; ++ ++static const char * const inet_act_led_groups[] = { ++ "gpio11", ++}; ++ ++static const char * const pcie_clkreq_groups[] = { ++ "gpio16", ++}; ++ ++static const char * const ephy0_act_led_groups[] = { ++ "gpio25", ++}; ++ ++static const char * const ephy1_act_led_groups[] = { ++ "gpio26", ++}; ++ ++static const char * const ephy2_act_led_groups[] = { ++ "gpio27", ++}; ++ ++static const char * const ephy3_act_led_groups[] = { ++ "gpio28", ++}; ++ ++static const char * const hsspi_cs1_groups[] = { ++ "hsspi_cs1" ++}; ++ ++static const char * const usb_host_port_groups[] = { ++ "usb_port1", ++}; ++ ++static const char * const usb_device_port_groups[] = { ++ "usb_port1", ++}; ++ ++#define BCM6328_MODE_FUN(n) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .mode_val = 1, \ ++ } ++ ++#define BCM6328_MUX_FUN(n, mux) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .mux_val = mux, \ ++ } ++ ++static const struct bcm6328_function bcm6328_funcs[] = { ++ BCM6328_MODE_FUN(led), ++ BCM6328_MUX_FUN(serial_led_data, 2), ++ BCM6328_MUX_FUN(serial_led_clk, 2), ++ BCM6328_MUX_FUN(inet_act_led, 1), ++ BCM6328_MUX_FUN(pcie_clkreq, 2), ++ BCM6328_MUX_FUN(ephy0_act_led, 1), ++ BCM6328_MUX_FUN(ephy1_act_led, 1), ++ BCM6328_MUX_FUN(ephy2_act_led, 1), ++ BCM6328_MUX_FUN(ephy3_act_led, 1), ++ BCM6328_MUX_FUN(hsspi_cs1, 2), ++ BCM6328_MUX_FUN(usb_host_port, 1), ++ BCM6328_MUX_FUN(usb_device_port, 2), ++}; ++ ++static inline unsigned int bcm6328_mux_off(unsigned int pin) ++{ ++ return bcm6328_mux[pin / 16]; ++} ++ ++static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm6328_groups); ++} ++ ++static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev, ++ unsigned group) ++{ ++ return bcm6328_groups[group].name; ++} ++ ++static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, ++ unsigned group, const unsigned **pins, ++ unsigned *num_pins) ++{ ++ *pins = bcm6328_groups[group].pins; ++ *num_pins = bcm6328_groups[group].num_pins; ++ ++ return 0; ++} ++ ++static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm6328_funcs); ++} ++ ++static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev, ++ unsigned selector) ++{ ++ return bcm6328_funcs[selector].name; ++} ++ ++static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev, ++ unsigned selector, ++ const char * const **groups, ++ unsigned * const num_groups) ++{ ++ *groups = bcm6328_funcs[selector].groups; ++ *num_groups = bcm6328_funcs[selector].num_groups; ++ ++ return 0; ++} ++ ++static void bcm6328_rmw_mux(struct bcm63xx_pinctrl *pc, unsigned pin, ++ unsigned int mode, unsigned int mux) ++{ ++ if (pin < BCM6328_NUM_GPIOS) ++ regmap_update_bits(pc->regs, BCM6328_MODE_REG, BIT(pin), ++ mode ? BIT(pin) : 0); ++ ++ regmap_update_bits(pc->regs, bcm6328_mux_off(pin), ++ BCM6328_MUX_MASK << ((pin % 16) * 2), ++ mux << ((pin % 16) * 2)); ++} ++ ++static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev, ++ unsigned selector, unsigned group) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ const struct bcm6328_pingroup *pg = &bcm6328_groups[group]; ++ const struct bcm6328_function *f = &bcm6328_funcs[selector]; ++ ++ bcm6328_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val); ++ ++ return 0; ++} ++ ++static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev, ++ struct pinctrl_gpio_range *range, ++ unsigned offset) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ ++ /* disable all functions using this pin */ ++ bcm6328_rmw_mux(pc, offset, 0, 0); ++ ++ return 0; ++} ++ ++static struct pinctrl_ops bcm6328_pctl_ops = { ++ .dt_free_map = pinctrl_utils_free_map, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .get_group_name = bcm6328_pinctrl_get_group_name, ++ .get_group_pins = bcm6328_pinctrl_get_group_pins, ++ .get_groups_count = bcm6328_pinctrl_get_group_count, ++}; ++ ++static struct pinmux_ops bcm6328_pmx_ops = { ++ .get_function_groups = bcm6328_pinctrl_get_groups, ++ .get_function_name = bcm6328_pinctrl_get_func_name, ++ .get_functions_count = bcm6328_pinctrl_get_func_count, ++ .gpio_request_enable = bcm6328_gpio_request_enable, ++ .set_mux = bcm6328_pinctrl_set_mux, ++ .strict = true, ++}; ++ ++static const struct bcm63xx_pinctrl_soc bcm6328_soc = { ++ .ngpios = BCM6328_NUM_GPIOS, ++ .npins = ARRAY_SIZE(bcm6328_pins), ++ .pctl_ops = &bcm6328_pctl_ops, ++ .pins = bcm6328_pins, ++ .pmx_ops = &bcm6328_pmx_ops, ++}; ++ ++static int bcm6328_pinctrl_probe(struct platform_device *pdev) ++{ ++ return bcm63xx_pinctrl_probe(pdev, &bcm6328_soc, NULL); ++} ++ ++static const struct of_device_id bcm6328_pinctrl_match[] = { ++ { .compatible = "brcm,bcm6328-pinctrl", }, ++ { /* sentinel */ } ++}; ++ ++static struct platform_driver bcm6328_pinctrl_driver = { ++ .probe = bcm6328_pinctrl_probe, ++ .driver = { ++ .name = "bcm6328-pinctrl", ++ .of_match_table = bcm6328_pinctrl_match, ++ }, ++}; ++ ++builtin_platform_driver(bcm6328_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/059-v5.13-dt-bindings-add-BCM6358-pincontroller-binding-docume.patch b/target/linux/bmips/patches-5.10/059-v5.13-dt-bindings-add-BCM6358-pincontroller-binding-docume.patch new file mode 100644 index 0000000000..001f94c5a5 --- /dev/null +++ b/target/linux/bmips/patches-5.10/059-v5.13-dt-bindings-add-BCM6358-pincontroller-binding-docume.patch @@ -0,0 +1,118 @@ +From 6d591614bfe881bb7664c9bebb6a48231c059411 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:09 +0100 +Subject: [PATCH 08/22] dt-bindings: add BCM6358 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in BCM6358 SoCs. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-9-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../pinctrl/brcm,bcm6358-pinctrl.yaml | 93 +++++++++++++++++++ + 1 file changed, 93 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml +@@ -0,0 +1,93 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6358 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Bindings for Broadcom's BCM6358 memory-mapped pin controller. ++ ++properties: ++ compatible: ++ const: brcm,bcm6358-pinctrl ++ ++ reg: ++ maxItems: 1 ++ ++patternProperties: ++ '-pins$': ++ type: object ++ $ref: pinmux-node.yaml# ++ ++ properties: ++ function: ++ enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia, ++ pwm_syn_clk, sys_irq ] ++ ++ pins: ++ enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp, ++ led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] ++ ++required: ++ - compatible ++ - reg ++ ++additionalProperties: false ++ ++examples: ++ - | ++ pinctrl@18 { ++ compatible = "brcm,bcm6358-pinctrl"; ++ reg = <0x18 0x4>; ++ ++ pinctrl_ebi_cs: ebi_cs-pins { ++ function = "ebi_cs"; ++ groups = "ebi_cs_grp"; ++ }; ++ ++ pinctrl_uart1: uart1-pins { ++ function = "uart1"; ++ groups = "uart1_grp"; ++ }; ++ ++ pinctrl_serial_led: serial_led-pins { ++ function = "serial_led"; ++ groups = "serial_led_grp"; ++ }; ++ ++ pinctrl_legacy_led: legacy_led-pins { ++ function = "legacy_led"; ++ groups = "legacy_led_grp"; ++ }; ++ ++ pinctrl_led: led-pins { ++ function = "led"; ++ groups = "led_grp"; ++ }; ++ ++ pinctrl_spi_cs_23: spi_cs-pins { ++ function = "spi_cs"; ++ groups = "spi_cs_grp"; ++ }; ++ ++ pinctrl_utopia: utopia-pins { ++ function = "utopia"; ++ groups = "utopia_grp"; ++ }; ++ ++ pinctrl_pwm_syn_clk: pwm_syn_clk-pins { ++ function = "pwm_syn_clk"; ++ groups = "pwm_syn_clk_grp"; ++ }; ++ ++ pinctrl_sys_irq: sys_irq-pins { ++ function = "sys_irq"; ++ groups = "sys_irq_grp"; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/060-v5.13-dt-bindings-add-BCM6358-GPIO-sysctl-binding-document.patch b/target/linux/bmips/patches-5.10/060-v5.13-dt-bindings-add-BCM6358-GPIO-sysctl-binding-document.patch new file mode 100644 index 0000000000..a36984e7ad --- /dev/null +++ b/target/linux/bmips/patches-5.10/060-v5.13-dt-bindings-add-BCM6358-GPIO-sysctl-binding-document.patch @@ -0,0 +1,153 @@ +From cfb1b98bc8d5ffd813428cb03c63b54cf63dd785 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:10 +0100 +Subject: [PATCH 09/22] dt-bindings: add BCM6358 GPIO sysctl binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the GPIO sysctl found in BCM6358 SoCs. + +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-10-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../mfd/brcm,bcm6358-gpio-sysctl.yaml | 130 ++++++++++++++++++ + 1 file changed, 130 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml +@@ -0,0 +1,130 @@ ++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6358 GPIO System Controller Device Tree Bindings ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Broadcom BCM6358 SoC GPIO system controller which provides a register map ++ for controlling the GPIO and pins of the SoC. ++ ++properties: ++ "#address-cells": true ++ ++ "#size-cells": true ++ ++ compatible: ++ items: ++ - const: brcm,bcm6358-gpio-sysctl ++ - const: syscon ++ - const: simple-mfd ++ ++ ranges: ++ maxItems: 1 ++ ++ reg: ++ maxItems: 1 ++ ++patternProperties: ++ "^gpio@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../gpio/brcm,bcm6345-gpio.yaml" ++ description: ++ GPIO controller for the SoC GPIOs. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. ++ ++ "^pinctrl@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml" ++ description: ++ Pin controller for the SoC pins. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml. ++ ++required: ++ - "#address-cells" ++ - compatible ++ - ranges ++ - reg ++ - "#size-cells" ++ ++additionalProperties: false ++ ++examples: ++ - | ++ syscon@fffe0080 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "brcm,bcm6358-gpio-sysctl", "syscon", "simple-mfd"; ++ reg = <0xfffe0080 0x80>; ++ ranges = <0 0xfffe0080 0x80>; ++ ++ gpio@0 { ++ compatible = "brcm,bcm6358-gpio"; ++ reg-names = "dirout", "dat"; ++ reg = <0x0 0x8>, <0x8 0x8>; ++ ++ gpio-controller; ++ gpio-ranges = <&pinctrl 0 0 40>; ++ #gpio-cells = <2>; ++ }; ++ ++ pinctrl: pinctrl@18 { ++ compatible = "brcm,bcm6358-pinctrl"; ++ reg = <0x18 0x4>; ++ ++ pinctrl_ebi_cs: ebi_cs-pins { ++ function = "ebi_cs"; ++ groups = "ebi_cs_grp"; ++ }; ++ ++ pinctrl_uart1: uart1-pins { ++ function = "uart1"; ++ groups = "uart1_grp"; ++ }; ++ ++ pinctrl_serial_led: serial_led-pins { ++ function = "serial_led"; ++ groups = "serial_led_grp"; ++ }; ++ ++ pinctrl_legacy_led: legacy_led-pins { ++ function = "legacy_led"; ++ groups = "legacy_led_grp"; ++ }; ++ ++ pinctrl_led: led-pins { ++ function = "led"; ++ groups = "led_grp"; ++ }; ++ ++ pinctrl_spi_cs_23: spi_cs-pins { ++ function = "spi_cs"; ++ groups = "spi_cs_grp"; ++ }; ++ ++ pinctrl_utopia: utopia-pins { ++ function = "utopia"; ++ groups = "utopia_grp"; ++ }; ++ ++ pinctrl_pwm_syn_clk: pwm_syn_clk-pins { ++ function = "pwm_syn_clk"; ++ groups = "pwm_syn_clk_grp"; ++ }; ++ ++ pinctrl_sys_irq: sys_irq-pins { ++ function = "sys_irq"; ++ groups = "sys_irq_grp"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/061-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch b/target/linux/bmips/patches-5.10/061-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch new file mode 100644 index 0000000000..266ed686dc --- /dev/null +++ b/target/linux/bmips/patches-5.10/061-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch @@ -0,0 +1,425 @@ +From 9494b16976e1ae3afc643abf638a25f2ce4c3f2b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:11 +0100 +Subject: [PATCH 10/22] pinctrl: add a pincontrol driver for BCM6358 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different +functions onto the GPIO pins. It does not support configuring individual +pins but only whole groups. These groups may overlap, and still require +the directions to be set correctly in the GPIO register. In addition the +functions register controls other, not directly mux related functions. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Link: https://lore.kernel.org/r/20210324081923.20379-11-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/bcm/Kconfig | 8 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm6358.c | 369 ++++++++++++++++++++++++++ + 3 files changed, 378 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6358.c + +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -44,6 +44,14 @@ config PINCTRL_BCM6328 + help + Say Y here to enable the Broadcom BCM6328 GPIO driver. + ++config PINCTRL_BCM6358 ++ bool "Broadcom BCM6358 GPIO driver" ++ depends on (BMIPS_GENERIC || COMPILE_TEST) ++ select PINCTRL_BCM63XX ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM6358 GPIO driver. ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinct + obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o + obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o + obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o ++obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o +--- /dev/null ++++ b/drivers/pinctrl/bcm/pinctrl-bcm6358.c +@@ -0,0 +1,369 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Driver for BCM6358 GPIO unit (pinctrl + GPIO) ++ * ++ * Copyright (C) 2021 Álvaro Fernández Rojas ++ * Copyright (C) 2016 Jonas Gorski ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../pinctrl-utils.h" ++ ++#include "pinctrl-bcm63xx.h" ++ ++#define BCM6358_NUM_GPIOS 40 ++ ++#define BCM6358_MODE_REG 0x18 ++#define BCM6358_MODE_MUX_NONE 0 ++#define BCM6358_MODE_MUX_EBI_CS BIT(5) ++#define BCM6358_MODE_MUX_UART1 BIT(6) ++#define BCM6358_MODE_MUX_SPI_CS BIT(7) ++#define BCM6358_MODE_MUX_ASYNC_MODEM BIT(8) ++#define BCM6358_MODE_MUX_LEGACY_LED BIT(9) ++#define BCM6358_MODE_MUX_SERIAL_LED BIT(10) ++#define BCM6358_MODE_MUX_LED BIT(11) ++#define BCM6358_MODE_MUX_UTOPIA BIT(12) ++#define BCM6358_MODE_MUX_CLKRST BIT(13) ++#define BCM6358_MODE_MUX_PWM_SYN_CLK BIT(14) ++#define BCM6358_MODE_MUX_SYS_IRQ BIT(15) ++ ++struct bcm6358_pingroup { ++ const char *name; ++ const unsigned * const pins; ++ const unsigned num_pins; ++ ++ const uint16_t mode_val; ++ ++ /* non-GPIO function muxes require the gpio direction to be set */ ++ const uint16_t direction; ++}; ++ ++struct bcm6358_function { ++ const char *name; ++ const char * const *groups; ++ const unsigned num_groups; ++}; ++ ++struct bcm6358_priv { ++ struct regmap_field *overlays; ++}; ++ ++#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3) \ ++ { \ ++ .number = a, \ ++ .name = b, \ ++ .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 | \ ++ BCM6358_MODE_MUX_##bit2 | \ ++ BCM6358_MODE_MUX_##bit3), \ ++ } ++ ++static const struct pinctrl_pin_desc bcm6358_pins[] = { ++ BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE), ++ BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE), ++ BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE), ++ BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE), ++ PINCTRL_PIN(4, "gpio4"), ++ BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE), ++ BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE), ++ BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE), ++ BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE), ++ BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE), ++ BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE), ++ BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE), ++ BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA), ++ BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA), ++ BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA), ++ BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA), ++ PINCTRL_PIN(16, "gpio16"), ++ PINCTRL_PIN(17, "gpio17"), ++ PINCTRL_PIN(18, "gpio18"), ++ PINCTRL_PIN(19, "gpio19"), ++ PINCTRL_PIN(20, "gpio20"), ++ PINCTRL_PIN(21, "gpio21"), ++ BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE), ++ BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE), ++ BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE), ++ BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE), ++ BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE), ++ BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE), ++ BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE), ++ BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE), ++ BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS), ++ BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS), ++ BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE), ++ BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE), ++ PINCTRL_PIN(34, "gpio34"), ++ PINCTRL_PIN(35, "gpio35"), ++ PINCTRL_PIN(36, "gpio36"), ++ PINCTRL_PIN(37, "gpio37"), ++ PINCTRL_PIN(38, "gpio38"), ++ PINCTRL_PIN(39, "gpio39"), ++}; ++ ++static unsigned ebi_cs_grp_pins[] = { 30, 31 }; ++ ++static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 }; ++ ++static unsigned spi_cs_grp_pins[] = { 32, 33 }; ++ ++static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 }; ++ ++static unsigned serial_led_grp_pins[] = { 6, 7 }; ++ ++static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 }; ++ ++static unsigned led_grp_pins[] = { 0, 1, 2, 3 }; ++ ++static unsigned utopia_grp_pins[] = { ++ 12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, ++}; ++ ++static unsigned pwm_syn_clk_grp_pins[] = { 8 }; ++ ++static unsigned sys_irq_grp_pins[] = { 5 }; ++ ++#define BCM6358_GPIO_MUX_GROUP(n, bit, dir) \ ++ { \ ++ .name = #n, \ ++ .pins = n##_pins, \ ++ .num_pins = ARRAY_SIZE(n##_pins), \ ++ .mode_val = BCM6358_MODE_MUX_##bit, \ ++ .direction = dir, \ ++ } ++ ++static const struct bcm6358_pingroup bcm6358_groups[] = { ++ BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3), ++ BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2), ++ BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6), ++ BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6), ++ BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f), ++ BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3), ++ BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf), ++ BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f), ++ BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1), ++ BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1), ++}; ++ ++static const char * const ebi_cs_groups[] = { ++ "ebi_cs_grp" ++}; ++ ++static const char * const uart1_groups[] = { ++ "uart1_grp" ++}; ++ ++static const char * const spi_cs_2_3_groups[] = { ++ "spi_cs_2_3_grp" ++}; ++ ++static const char * const async_modem_groups[] = { ++ "async_modem_grp" ++}; ++ ++static const char * const legacy_led_groups[] = { ++ "legacy_led_grp", ++}; ++ ++static const char * const serial_led_groups[] = { ++ "serial_led_grp", ++}; ++ ++static const char * const led_groups[] = { ++ "led_grp", ++}; ++ ++static const char * const clkrst_groups[] = { ++ "clkrst_grp", ++}; ++ ++static const char * const pwm_syn_clk_groups[] = { ++ "pwm_syn_clk_grp", ++}; ++ ++static const char * const sys_irq_groups[] = { ++ "sys_irq_grp", ++}; ++ ++#define BCM6358_FUN(n) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ } ++ ++static const struct bcm6358_function bcm6358_funcs[] = { ++ BCM6358_FUN(ebi_cs), ++ BCM6358_FUN(uart1), ++ BCM6358_FUN(spi_cs_2_3), ++ BCM6358_FUN(async_modem), ++ BCM6358_FUN(legacy_led), ++ BCM6358_FUN(serial_led), ++ BCM6358_FUN(led), ++ BCM6358_FUN(clkrst), ++ BCM6358_FUN(pwm_syn_clk), ++ BCM6358_FUN(sys_irq), ++}; ++ ++static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm6358_groups); ++} ++ ++static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev, ++ unsigned group) ++{ ++ return bcm6358_groups[group].name; ++} ++ ++static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, ++ unsigned group, const unsigned **pins, ++ unsigned *num_pins) ++{ ++ *pins = bcm6358_groups[group].pins; ++ *num_pins = bcm6358_groups[group].num_pins; ++ ++ return 0; ++} ++ ++static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm6358_funcs); ++} ++ ++static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev, ++ unsigned selector) ++{ ++ return bcm6358_funcs[selector].name; ++} ++ ++static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev, ++ unsigned selector, ++ const char * const **groups, ++ unsigned * const num_groups) ++{ ++ *groups = bcm6358_funcs[selector].groups; ++ *num_groups = bcm6358_funcs[selector].num_groups; ++ ++ return 0; ++} ++ ++static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev, ++ unsigned selector, unsigned group) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ struct bcm6358_priv *priv = pc->driver_data; ++ const struct bcm6358_pingroup *pg = &bcm6358_groups[group]; ++ unsigned int val = pg->mode_val; ++ unsigned int mask = val; ++ unsigned pin; ++ ++ for (pin = 0; pin < pg->num_pins; pin++) ++ mask |= (unsigned long)bcm6358_pins[pin].drv_data; ++ ++ regmap_field_update_bits(priv->overlays, mask, val); ++ ++ for (pin = 0; pin < pg->num_pins; pin++) { ++ struct pinctrl_gpio_range *range; ++ unsigned int hw_gpio = bcm6358_pins[pin].number; ++ ++ range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio); ++ if (range) { ++ struct gpio_chip *gc = range->gc; ++ ++ if (pg->direction & BIT(pin)) ++ gc->direction_output(gc, hw_gpio, 0); ++ else ++ gc->direction_input(gc, hw_gpio); ++ } ++ } ++ ++ return 0; ++} ++ ++static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev, ++ struct pinctrl_gpio_range *range, ++ unsigned offset) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ struct bcm6358_priv *priv = pc->driver_data; ++ unsigned int mask; ++ ++ mask = (unsigned long) bcm6358_pins[offset].drv_data; ++ if (!mask) ++ return 0; ++ ++ /* disable all functions using this pin */ ++ return regmap_field_update_bits(priv->overlays, mask, 0); ++} ++ ++static struct pinctrl_ops bcm6358_pctl_ops = { ++ .dt_free_map = pinctrl_utils_free_map, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .get_group_name = bcm6358_pinctrl_get_group_name, ++ .get_group_pins = bcm6358_pinctrl_get_group_pins, ++ .get_groups_count = bcm6358_pinctrl_get_group_count, ++}; ++ ++static struct pinmux_ops bcm6358_pmx_ops = { ++ .get_function_groups = bcm6358_pinctrl_get_groups, ++ .get_function_name = bcm6358_pinctrl_get_func_name, ++ .get_functions_count = bcm6358_pinctrl_get_func_count, ++ .gpio_request_enable = bcm6358_gpio_request_enable, ++ .set_mux = bcm6358_pinctrl_set_mux, ++ .strict = true, ++}; ++ ++static const struct bcm63xx_pinctrl_soc bcm6358_soc = { ++ .ngpios = BCM6358_NUM_GPIOS, ++ .npins = ARRAY_SIZE(bcm6358_pins), ++ .pctl_ops = &bcm6358_pctl_ops, ++ .pins = bcm6358_pins, ++ .pmx_ops = &bcm6358_pmx_ops, ++}; ++ ++static int bcm6358_pinctrl_probe(struct platform_device *pdev) ++{ ++ struct reg_field overlays = REG_FIELD(BCM6358_MODE_REG, 0, 15); ++ struct device *dev = &pdev->dev; ++ struct bcm63xx_pinctrl *pc; ++ struct bcm6358_priv *priv; ++ int err; ++ ++ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ err = bcm63xx_pinctrl_probe(pdev, &bcm6358_soc, (void *) priv); ++ if (err) ++ return err; ++ ++ pc = platform_get_drvdata(pdev); ++ ++ priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays); ++ if (IS_ERR(priv->overlays)) ++ return PTR_ERR(priv->overlays); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcm6358_pinctrl_match[] = { ++ { .compatible = "brcm,bcm6358-pinctrl", }, ++ { /* sentinel */ } ++}; ++ ++static struct platform_driver bcm6358_pinctrl_driver = { ++ .probe = bcm6358_pinctrl_probe, ++ .driver = { ++ .name = "bcm6358-pinctrl", ++ .of_match_table = bcm6358_pinctrl_match, ++ }, ++}; ++ ++builtin_platform_driver(bcm6358_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/062-v5.13-dt-bindings-add-BCM6362-pincontroller-binding-docume.patch b/target/linux/bmips/patches-5.10/062-v5.13-dt-bindings-add-BCM6362-pincontroller-binding-docume.patch new file mode 100644 index 0000000000..afdfbff1c2 --- /dev/null +++ b/target/linux/bmips/patches-5.10/062-v5.13-dt-bindings-add-BCM6362-pincontroller-binding-docume.patch @@ -0,0 +1,231 @@ +From 6e4b5e1fc77513359989112e002e08553d0d8d5c Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:12 +0100 +Subject: [PATCH 11/22] dt-bindings: add BCM6362 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in BCM6362 SoCs. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-12-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../pinctrl/brcm,bcm6362-pinctrl.yaml | 206 ++++++++++++++++++ + 1 file changed, 206 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml +@@ -0,0 +1,206 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6362 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Bindings for Broadcom's BCM6362 memory-mapped pin controller. ++ ++properties: ++ compatible: ++ const: brcm,bcm6362-pinctrl ++ ++ reg: ++ maxItems: 2 ++ ++patternProperties: ++ '-pins$': ++ type: object ++ $ref: pinmux-node.yaml# ++ ++ properties: ++ function: ++ enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data, ++ robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1, ++ inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts, ++ uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso, ++ adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led, ++ ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1, ++ ext_irq2, ext_irq3, nand ] ++ ++ pins: ++ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, ++ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, ++ gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, ++ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] ++ ++required: ++ - compatible ++ - reg ++ ++additionalProperties: false ++ ++examples: ++ - | ++ pinctrl@18 { ++ compatible = "brcm,bcm6362-pinctrl"; ++ reg = <0x18 0x10>, <0x38 0x4>; ++ ++ pinctrl_usb_device_led: usb_device_led-pins { ++ function = "usb_device_led"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_sys_irq: sys_irq-pins { ++ function = "sys_irq"; ++ pins = "gpio1"; ++ }; ++ ++ pinctrl_serial_led: serial_led-pins { ++ pinctrl_serial_led_clk: serial_led_clk-pins { ++ function = "serial_led_clk"; ++ pins = "gpio2"; ++ }; ++ ++ pinctrl_serial_led_data: serial_led_data-pins { ++ function = "serial_led_data"; ++ pins = "gpio3"; ++ }; ++ }; ++ ++ pinctrl_robosw_led_data: robosw_led_data-pins { ++ function = "robosw_led_data"; ++ pins = "gpio4"; ++ }; ++ ++ pinctrl_robosw_led_clk: robosw_led_clk-pins { ++ function = "robosw_led_clk"; ++ pins = "gpio5"; ++ }; ++ ++ pinctrl_robosw_led0: robosw_led0-pins { ++ function = "robosw_led0"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_robosw_led1: robosw_led1-pins { ++ function = "robosw_led1"; ++ pins = "gpio7"; ++ }; ++ ++ pinctrl_inet_led: inet_led-pins { ++ function = "inet_led"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_spi_cs2: spi_cs2-pins { ++ function = "spi_cs2"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_spi_cs3: spi_cs3-pins { ++ function = "spi_cs3"; ++ pins = "gpio10"; ++ }; ++ ++ pinctrl_ntr_pulse: ntr_pulse-pins { ++ function = "ntr_pulse"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_uart1_scts: uart1_scts-pins { ++ function = "uart1_scts"; ++ pins = "gpio12"; ++ }; ++ ++ pinctrl_uart1_srts: uart1_srts-pins { ++ function = "uart1_srts"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_uart1: uart1-pins { ++ pinctrl_uart1_sdin: uart1_sdin-pins { ++ function = "uart1_sdin"; ++ pins = "gpio14"; ++ }; ++ ++ pinctrl_uart1_sdout: uart1_sdout-pins { ++ function = "uart1_sdout"; ++ pins = "gpio15"; ++ }; ++ }; ++ ++ pinctrl_adsl_spi: adsl_spi-pins { ++ pinctrl_adsl_spi_miso: adsl_spi_miso-pins { ++ function = "adsl_spi_miso"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { ++ function = "adsl_spi_mosi"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_adsl_spi_clk: adsl_spi_clk-pins { ++ function = "adsl_spi_clk"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_adsl_spi_cs: adsl_spi_cs-pins { ++ function = "adsl_spi_cs"; ++ pins = "gpio19"; ++ }; ++ }; ++ ++ pinctrl_ephy0_led: ephy0_led-pins { ++ function = "ephy0_led"; ++ pins = "gpio20"; ++ }; ++ ++ pinctrl_ephy1_led: ephy1_led-pins { ++ function = "ephy1_led"; ++ pins = "gpio21"; ++ }; ++ ++ pinctrl_ephy2_led: ephy2_led-pins { ++ function = "ephy2_led"; ++ pins = "gpio22"; ++ }; ++ ++ pinctrl_ephy3_led: ephy3_led-pins { ++ function = "ephy3_led"; ++ pins = "gpio23"; ++ }; ++ ++ pinctrl_ext_irq0: ext_irq0-pins { ++ function = "ext_irq0"; ++ pins = "gpio24"; ++ }; ++ ++ pinctrl_ext_irq1: ext_irq1-pins { ++ function = "ext_irq1"; ++ pins = "gpio25"; ++ }; ++ ++ pinctrl_ext_irq2: ext_irq2-pins { ++ function = "ext_irq2"; ++ pins = "gpio26"; ++ }; ++ ++ pinctrl_ext_irq3: ext_irq3-pins { ++ function = "ext_irq3"; ++ pins = "gpio27"; ++ }; ++ ++ pinctrl_nand: nand-pins { ++ function = "nand"; ++ group = "nand_grp"; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/063-v5.13-dt-bindings-add-BCM6362-GPIO-sysctl-binding-document.patch b/target/linux/bmips/patches-5.10/063-v5.13-dt-bindings-add-BCM6362-GPIO-sysctl-binding-document.patch new file mode 100644 index 0000000000..db0952211e --- /dev/null +++ b/target/linux/bmips/patches-5.10/063-v5.13-dt-bindings-add-BCM6362-GPIO-sysctl-binding-document.patch @@ -0,0 +1,259 @@ +From 7ca989eafbd6ce1c216a775556c4893baab1959b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:13 +0100 +Subject: [PATCH 12/22] dt-bindings: add BCM6362 GPIO sysctl binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the GPIO sysctl found in BCM6362 SoCs. + +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-13-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../mfd/brcm,bcm6362-gpio-sysctl.yaml | 236 ++++++++++++++++++ + 1 file changed, 236 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml +@@ -0,0 +1,236 @@ ++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6362 GPIO System Controller Device Tree Bindings ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Broadcom BCM6362 SoC GPIO system controller which provides a register map ++ for controlling the GPIO and pins of the SoC. ++ ++properties: ++ "#address-cells": true ++ ++ "#size-cells": true ++ ++ compatible: ++ items: ++ - const: brcm,bcm6362-gpio-sysctl ++ - const: syscon ++ - const: simple-mfd ++ ++ ranges: ++ maxItems: 1 ++ ++ reg: ++ maxItems: 1 ++ ++patternProperties: ++ "^gpio@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../gpio/brcm,bcm6345-gpio.yaml" ++ description: ++ GPIO controller for the SoC GPIOs. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. ++ ++ "^pinctrl@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml" ++ description: ++ Pin controller for the SoC pins. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml. ++ ++required: ++ - "#address-cells" ++ - compatible ++ - ranges ++ - reg ++ - "#size-cells" ++ ++additionalProperties: false ++ ++examples: ++ - | ++ syscon@10000080 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "brcm,bcm6362-gpio-sysctl", "syscon", "simple-mfd"; ++ reg = <0x10000080 0x80>; ++ ranges = <0 0x10000080 0x80>; ++ ++ gpio@0 { ++ compatible = "brcm,bcm6362-gpio"; ++ reg-names = "dirout", "dat"; ++ reg = <0x0 0x8>, <0x8 0x8>; ++ ++ gpio-controller; ++ gpio-ranges = <&pinctrl 0 0 48>; ++ #gpio-cells = <2>; ++ }; ++ ++ pinctrl: pinctrl@18 { ++ compatible = "brcm,bcm6362-pinctrl"; ++ reg = <0x18 0x10>, <0x38 0x4>; ++ ++ pinctrl_usb_device_led: usb_device_led-pins { ++ function = "usb_device_led"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_sys_irq: sys_irq-pins { ++ function = "sys_irq"; ++ pins = "gpio1"; ++ }; ++ ++ pinctrl_serial_led: serial_led-pins { ++ pinctrl_serial_led_clk: serial_led_clk-pins { ++ function = "serial_led_clk"; ++ pins = "gpio2"; ++ }; ++ ++ pinctrl_serial_led_data: serial_led_data-pins { ++ function = "serial_led_data"; ++ pins = "gpio3"; ++ }; ++ }; ++ ++ pinctrl_robosw_led_data: robosw_led_data-pins { ++ function = "robosw_led_data"; ++ pins = "gpio4"; ++ }; ++ ++ pinctrl_robosw_led_clk: robosw_led_clk-pins { ++ function = "robosw_led_clk"; ++ pins = "gpio5"; ++ }; ++ ++ pinctrl_robosw_led0: robosw_led0-pins { ++ function = "robosw_led0"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_robosw_led1: robosw_led1-pins { ++ function = "robosw_led1"; ++ pins = "gpio7"; ++ }; ++ ++ pinctrl_inet_led: inet_led-pins { ++ function = "inet_led"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_spi_cs2: spi_cs2-pins { ++ function = "spi_cs2"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_spi_cs3: spi_cs3-pins { ++ function = "spi_cs3"; ++ pins = "gpio10"; ++ }; ++ ++ pinctrl_ntr_pulse: ntr_pulse-pins { ++ function = "ntr_pulse"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_uart1_scts: uart1_scts-pins { ++ function = "uart1_scts"; ++ pins = "gpio12"; ++ }; ++ ++ pinctrl_uart1_srts: uart1_srts-pins { ++ function = "uart1_srts"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_uart1: uart1-pins { ++ pinctrl_uart1_sdin: uart1_sdin-pins { ++ function = "uart1_sdin"; ++ pins = "gpio14"; ++ }; ++ ++ pinctrl_uart1_sdout: uart1_sdout-pins { ++ function = "uart1_sdout"; ++ pins = "gpio15"; ++ }; ++ }; ++ ++ pinctrl_adsl_spi: adsl_spi-pins { ++ pinctrl_adsl_spi_miso: adsl_spi_miso-pins { ++ function = "adsl_spi_miso"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { ++ function = "adsl_spi_mosi"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_adsl_spi_clk: adsl_spi_clk-pins { ++ function = "adsl_spi_clk"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_adsl_spi_cs: adsl_spi_cs-pins { ++ function = "adsl_spi_cs"; ++ pins = "gpio19"; ++ }; ++ }; ++ ++ pinctrl_ephy0_led: ephy0_led-pins { ++ function = "ephy0_led"; ++ pins = "gpio20"; ++ }; ++ ++ pinctrl_ephy1_led: ephy1_led-pins { ++ function = "ephy1_led"; ++ pins = "gpio21"; ++ }; ++ ++ pinctrl_ephy2_led: ephy2_led-pins { ++ function = "ephy2_led"; ++ pins = "gpio22"; ++ }; ++ ++ pinctrl_ephy3_led: ephy3_led-pins { ++ function = "ephy3_led"; ++ pins = "gpio23"; ++ }; ++ ++ pinctrl_ext_irq0: ext_irq0-pins { ++ function = "ext_irq0"; ++ pins = "gpio24"; ++ }; ++ ++ pinctrl_ext_irq1: ext_irq1-pins { ++ function = "ext_irq1"; ++ pins = "gpio25"; ++ }; ++ ++ pinctrl_ext_irq2: ext_irq2-pins { ++ function = "ext_irq2"; ++ pins = "gpio26"; ++ }; ++ ++ pinctrl_ext_irq3: ext_irq3-pins { ++ function = "ext_irq3"; ++ pins = "gpio27"; ++ }; ++ ++ pinctrl_nand: nand-pins { ++ function = "nand"; ++ group = "nand_grp"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/064-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch b/target/linux/bmips/patches-5.10/064-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch new file mode 100644 index 0000000000..dc775c3c2c --- /dev/null +++ b/target/linux/bmips/patches-5.10/064-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch @@ -0,0 +1,672 @@ +From 705791e23ecd93d6c2697234fdf0c22b499c0a5b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:14 +0100 +Subject: [PATCH 13/22] pinctrl: add a pincontrol driver for BCM6362 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual +GPIO pins to the LED controller, to be available by the integrated +wifi, or other functions. It also supports overlay groups, of which +only NAND is documented. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Link: https://lore.kernel.org/r/20210324081923.20379-14-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/bcm/Kconfig | 8 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm6362.c | 617 ++++++++++++++++++++++++++ + 3 files changed, 626 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6362.c + +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -52,6 +52,14 @@ config PINCTRL_BCM6358 + help + Say Y here to enable the Broadcom BCM6358 GPIO driver. + ++config PINCTRL_BCM6362 ++ bool "Broadcom BCM6362 GPIO driver" ++ depends on (BMIPS_GENERIC || COMPILE_TEST) ++ select PINCTRL_BCM63XX ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM6362 GPIO driver. ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctr + obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o + obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o + obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o ++obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o +--- /dev/null ++++ b/drivers/pinctrl/bcm/pinctrl-bcm6362.c +@@ -0,0 +1,617 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Driver for BCM6362 GPIO unit (pinctrl + GPIO) ++ * ++ * Copyright (C) 2021 Álvaro Fernández Rojas ++ * Copyright (C) 2016 Jonas Gorski ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../pinctrl-utils.h" ++ ++#include "pinctrl-bcm63xx.h" ++ ++#define BCM6362_BANK_GPIOS 32 ++#define BCM6362_NUM_GPIOS 48 ++#define BCM6362_NUM_LEDS 24 ++ ++#define BCM6362_LED_REG 0x10 ++#define BCM6362_MODE_REG 0x18 ++#define BCM6362_CTRL_REG 0x1c ++#define BCM6362_BASEMODE_REG 0x38 ++#define BASEMODE_NAND BIT(2) ++ ++enum bcm6362_pinctrl_reg { ++ BCM6362_LEDCTRL, ++ BCM6362_MODE, ++ BCM6362_CTRL, ++ BCM6362_BASEMODE, ++}; ++ ++struct bcm6362_pingroup { ++ const char *name; ++ const unsigned * const pins; ++ const unsigned num_pins; ++}; ++ ++struct bcm6362_function { ++ const char *name; ++ const char * const *groups; ++ const unsigned num_groups; ++ ++ enum bcm6362_pinctrl_reg reg; ++ uint32_t basemode_mask; ++}; ++ ++#define BCM6362_PIN(a, b, mask) \ ++ { \ ++ .number = a, \ ++ .name = b, \ ++ .drv_data = (void *)(mask), \ ++ } ++ ++static const struct pinctrl_pin_desc bcm6362_pins[] = { ++ PINCTRL_PIN(0, "gpio0"), ++ PINCTRL_PIN(1, "gpio1"), ++ PINCTRL_PIN(2, "gpio2"), ++ PINCTRL_PIN(3, "gpio3"), ++ PINCTRL_PIN(4, "gpio4"), ++ PINCTRL_PIN(5, "gpio5"), ++ PINCTRL_PIN(6, "gpio6"), ++ PINCTRL_PIN(7, "gpio7"), ++ BCM6362_PIN(8, "gpio8", BASEMODE_NAND), ++ PINCTRL_PIN(9, "gpio9"), ++ PINCTRL_PIN(10, "gpio10"), ++ PINCTRL_PIN(11, "gpio11"), ++ BCM6362_PIN(12, "gpio12", BASEMODE_NAND), ++ BCM6362_PIN(13, "gpio13", BASEMODE_NAND), ++ BCM6362_PIN(14, "gpio14", BASEMODE_NAND), ++ BCM6362_PIN(15, "gpio15", BASEMODE_NAND), ++ BCM6362_PIN(16, "gpio16", BASEMODE_NAND), ++ BCM6362_PIN(17, "gpio17", BASEMODE_NAND), ++ BCM6362_PIN(18, "gpio18", BASEMODE_NAND), ++ BCM6362_PIN(19, "gpio19", BASEMODE_NAND), ++ BCM6362_PIN(20, "gpio20", BASEMODE_NAND), ++ BCM6362_PIN(21, "gpio21", BASEMODE_NAND), ++ BCM6362_PIN(22, "gpio22", BASEMODE_NAND), ++ BCM6362_PIN(23, "gpio23", BASEMODE_NAND), ++ PINCTRL_PIN(24, "gpio24"), ++ PINCTRL_PIN(25, "gpio25"), ++ PINCTRL_PIN(26, "gpio26"), ++ BCM6362_PIN(27, "gpio27", BASEMODE_NAND), ++ PINCTRL_PIN(28, "gpio28"), ++ PINCTRL_PIN(29, "gpio29"), ++ PINCTRL_PIN(30, "gpio30"), ++ PINCTRL_PIN(31, "gpio31"), ++ PINCTRL_PIN(32, "gpio32"), ++ PINCTRL_PIN(33, "gpio33"), ++ PINCTRL_PIN(34, "gpio34"), ++ PINCTRL_PIN(35, "gpio35"), ++ PINCTRL_PIN(36, "gpio36"), ++ PINCTRL_PIN(37, "gpio37"), ++ PINCTRL_PIN(38, "gpio38"), ++ PINCTRL_PIN(39, "gpio39"), ++ PINCTRL_PIN(40, "gpio40"), ++ PINCTRL_PIN(41, "gpio41"), ++ PINCTRL_PIN(42, "gpio42"), ++ PINCTRL_PIN(43, "gpio43"), ++ PINCTRL_PIN(44, "gpio44"), ++ PINCTRL_PIN(45, "gpio45"), ++ PINCTRL_PIN(46, "gpio46"), ++ PINCTRL_PIN(47, "gpio47"), ++}; ++ ++static unsigned gpio0_pins[] = { 0 }; ++static unsigned gpio1_pins[] = { 1 }; ++static unsigned gpio2_pins[] = { 2 }; ++static unsigned gpio3_pins[] = { 3 }; ++static unsigned gpio4_pins[] = { 4 }; ++static unsigned gpio5_pins[] = { 5 }; ++static unsigned gpio6_pins[] = { 6 }; ++static unsigned gpio7_pins[] = { 7 }; ++static unsigned gpio8_pins[] = { 8 }; ++static unsigned gpio9_pins[] = { 9 }; ++static unsigned gpio10_pins[] = { 10 }; ++static unsigned gpio11_pins[] = { 11 }; ++static unsigned gpio12_pins[] = { 12 }; ++static unsigned gpio13_pins[] = { 13 }; ++static unsigned gpio14_pins[] = { 14 }; ++static unsigned gpio15_pins[] = { 15 }; ++static unsigned gpio16_pins[] = { 16 }; ++static unsigned gpio17_pins[] = { 17 }; ++static unsigned gpio18_pins[] = { 18 }; ++static unsigned gpio19_pins[] = { 19 }; ++static unsigned gpio20_pins[] = { 20 }; ++static unsigned gpio21_pins[] = { 21 }; ++static unsigned gpio22_pins[] = { 22 }; ++static unsigned gpio23_pins[] = { 23 }; ++static unsigned gpio24_pins[] = { 24 }; ++static unsigned gpio25_pins[] = { 25 }; ++static unsigned gpio26_pins[] = { 26 }; ++static unsigned gpio27_pins[] = { 27 }; ++static unsigned gpio28_pins[] = { 28 }; ++static unsigned gpio29_pins[] = { 29 }; ++static unsigned gpio30_pins[] = { 30 }; ++static unsigned gpio31_pins[] = { 31 }; ++static unsigned gpio32_pins[] = { 32 }; ++static unsigned gpio33_pins[] = { 33 }; ++static unsigned gpio34_pins[] = { 34 }; ++static unsigned gpio35_pins[] = { 35 }; ++static unsigned gpio36_pins[] = { 36 }; ++static unsigned gpio37_pins[] = { 37 }; ++static unsigned gpio38_pins[] = { 38 }; ++static unsigned gpio39_pins[] = { 39 }; ++static unsigned gpio40_pins[] = { 40 }; ++static unsigned gpio41_pins[] = { 41 }; ++static unsigned gpio42_pins[] = { 42 }; ++static unsigned gpio43_pins[] = { 43 }; ++static unsigned gpio44_pins[] = { 44 }; ++static unsigned gpio45_pins[] = { 45 }; ++static unsigned gpio46_pins[] = { 46 }; ++static unsigned gpio47_pins[] = { 47 }; ++ ++static unsigned nand_grp_pins[] = { ++ 8, 12, 13, 14, 15, 16, 17, ++ 18, 19, 20, 21, 22, 23, 27, ++}; ++ ++#define BCM6362_GROUP(n) \ ++ { \ ++ .name = #n, \ ++ .pins = n##_pins, \ ++ .num_pins = ARRAY_SIZE(n##_pins), \ ++ } ++ ++static struct bcm6362_pingroup bcm6362_groups[] = { ++ BCM6362_GROUP(gpio0), ++ BCM6362_GROUP(gpio1), ++ BCM6362_GROUP(gpio2), ++ BCM6362_GROUP(gpio3), ++ BCM6362_GROUP(gpio4), ++ BCM6362_GROUP(gpio5), ++ BCM6362_GROUP(gpio6), ++ BCM6362_GROUP(gpio7), ++ BCM6362_GROUP(gpio8), ++ BCM6362_GROUP(gpio9), ++ BCM6362_GROUP(gpio10), ++ BCM6362_GROUP(gpio11), ++ BCM6362_GROUP(gpio12), ++ BCM6362_GROUP(gpio13), ++ BCM6362_GROUP(gpio14), ++ BCM6362_GROUP(gpio15), ++ BCM6362_GROUP(gpio16), ++ BCM6362_GROUP(gpio17), ++ BCM6362_GROUP(gpio18), ++ BCM6362_GROUP(gpio19), ++ BCM6362_GROUP(gpio20), ++ BCM6362_GROUP(gpio21), ++ BCM6362_GROUP(gpio22), ++ BCM6362_GROUP(gpio23), ++ BCM6362_GROUP(gpio24), ++ BCM6362_GROUP(gpio25), ++ BCM6362_GROUP(gpio26), ++ BCM6362_GROUP(gpio27), ++ BCM6362_GROUP(gpio28), ++ BCM6362_GROUP(gpio29), ++ BCM6362_GROUP(gpio30), ++ BCM6362_GROUP(gpio31), ++ BCM6362_GROUP(gpio32), ++ BCM6362_GROUP(gpio33), ++ BCM6362_GROUP(gpio34), ++ BCM6362_GROUP(gpio35), ++ BCM6362_GROUP(gpio36), ++ BCM6362_GROUP(gpio37), ++ BCM6362_GROUP(gpio38), ++ BCM6362_GROUP(gpio39), ++ BCM6362_GROUP(gpio40), ++ BCM6362_GROUP(gpio41), ++ BCM6362_GROUP(gpio42), ++ BCM6362_GROUP(gpio43), ++ BCM6362_GROUP(gpio44), ++ BCM6362_GROUP(gpio45), ++ BCM6362_GROUP(gpio46), ++ BCM6362_GROUP(gpio47), ++ BCM6362_GROUP(nand_grp), ++}; ++ ++static const char * const led_groups[] = { ++ "gpio0", ++ "gpio1", ++ "gpio2", ++ "gpio3", ++ "gpio4", ++ "gpio5", ++ "gpio6", ++ "gpio7", ++ "gpio8", ++ "gpio9", ++ "gpio10", ++ "gpio11", ++ "gpio12", ++ "gpio13", ++ "gpio14", ++ "gpio15", ++ "gpio16", ++ "gpio17", ++ "gpio18", ++ "gpio19", ++ "gpio20", ++ "gpio21", ++ "gpio22", ++ "gpio23", ++}; ++ ++static const char * const usb_device_led_groups[] = { ++ "gpio0", ++}; ++ ++static const char * const sys_irq_groups[] = { ++ "gpio1", ++}; ++ ++static const char * const serial_led_clk_groups[] = { ++ "gpio2", ++}; ++ ++static const char * const serial_led_data_groups[] = { ++ "gpio3", ++}; ++ ++static const char * const robosw_led_data_groups[] = { ++ "gpio4", ++}; ++ ++static const char * const robosw_led_clk_groups[] = { ++ "gpio5", ++}; ++ ++static const char * const robosw_led0_groups[] = { ++ "gpio6", ++}; ++ ++static const char * const robosw_led1_groups[] = { ++ "gpio7", ++}; ++ ++static const char * const inet_led_groups[] = { ++ "gpio8", ++}; ++ ++static const char * const spi_cs2_groups[] = { ++ "gpio9", ++}; ++ ++static const char * const spi_cs3_groups[] = { ++ "gpio10", ++}; ++ ++static const char * const ntr_pulse_groups[] = { ++ "gpio11", ++}; ++ ++static const char * const uart1_scts_groups[] = { ++ "gpio12", ++}; ++ ++static const char * const uart1_srts_groups[] = { ++ "gpio13", ++}; ++ ++static const char * const uart1_sdin_groups[] = { ++ "gpio14", ++}; ++ ++static const char * const uart1_sdout_groups[] = { ++ "gpio15", ++}; ++ ++static const char * const adsl_spi_miso_groups[] = { ++ "gpio16", ++}; ++ ++static const char * const adsl_spi_mosi_groups[] = { ++ "gpio17", ++}; ++ ++static const char * const adsl_spi_clk_groups[] = { ++ "gpio18", ++}; ++ ++static const char * const adsl_spi_cs_groups[] = { ++ "gpio19", ++}; ++ ++static const char * const ephy0_led_groups[] = { ++ "gpio20", ++}; ++ ++static const char * const ephy1_led_groups[] = { ++ "gpio21", ++}; ++ ++static const char * const ephy2_led_groups[] = { ++ "gpio22", ++}; ++ ++static const char * const ephy3_led_groups[] = { ++ "gpio23", ++}; ++ ++static const char * const ext_irq0_groups[] = { ++ "gpio24", ++}; ++ ++static const char * const ext_irq1_groups[] = { ++ "gpio25", ++}; ++ ++static const char * const ext_irq2_groups[] = { ++ "gpio26", ++}; ++ ++static const char * const ext_irq3_groups[] = { ++ "gpio27", ++}; ++ ++static const char * const wifi_groups[] = { ++ "gpio32", ++ "gpio33", ++ "gpio34", ++ "gpio35", ++ "gpio36", ++ "gpio37", ++ "gpio38", ++ "gpio39", ++ "gpio40", ++ "gpio41", ++ "gpio42", ++ "gpio43", ++ "gpio44", ++ "gpio45", ++ "gpio46", ++ "gpio47", ++}; ++ ++static const char * const nand_groups[] = { ++ "nand_grp", ++}; ++ ++#define BCM6362_LED_FUN(n) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .reg = BCM6362_LEDCTRL, \ ++ } ++ ++#define BCM6362_MODE_FUN(n) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .reg = BCM6362_MODE, \ ++ } ++ ++#define BCM6362_CTRL_FUN(n) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .reg = BCM6362_CTRL, \ ++ } ++ ++#define BCM6362_BASEMODE_FUN(n, mask) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .reg = BCM6362_BASEMODE, \ ++ .basemode_mask = (mask), \ ++ } ++ ++static const struct bcm6362_function bcm6362_funcs[] = { ++ BCM6362_LED_FUN(led), ++ BCM6362_MODE_FUN(usb_device_led), ++ BCM6362_MODE_FUN(sys_irq), ++ BCM6362_MODE_FUN(serial_led_clk), ++ BCM6362_MODE_FUN(serial_led_data), ++ BCM6362_MODE_FUN(robosw_led_data), ++ BCM6362_MODE_FUN(robosw_led_clk), ++ BCM6362_MODE_FUN(robosw_led0), ++ BCM6362_MODE_FUN(robosw_led1), ++ BCM6362_MODE_FUN(inet_led), ++ BCM6362_MODE_FUN(spi_cs2), ++ BCM6362_MODE_FUN(spi_cs3), ++ BCM6362_MODE_FUN(ntr_pulse), ++ BCM6362_MODE_FUN(uart1_scts), ++ BCM6362_MODE_FUN(uart1_srts), ++ BCM6362_MODE_FUN(uart1_sdin), ++ BCM6362_MODE_FUN(uart1_sdout), ++ BCM6362_MODE_FUN(adsl_spi_miso), ++ BCM6362_MODE_FUN(adsl_spi_mosi), ++ BCM6362_MODE_FUN(adsl_spi_clk), ++ BCM6362_MODE_FUN(adsl_spi_cs), ++ BCM6362_MODE_FUN(ephy0_led), ++ BCM6362_MODE_FUN(ephy1_led), ++ BCM6362_MODE_FUN(ephy2_led), ++ BCM6362_MODE_FUN(ephy3_led), ++ BCM6362_MODE_FUN(ext_irq0), ++ BCM6362_MODE_FUN(ext_irq1), ++ BCM6362_MODE_FUN(ext_irq2), ++ BCM6362_MODE_FUN(ext_irq3), ++ BCM6362_CTRL_FUN(wifi), ++ BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND), ++}; ++ ++static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm6362_groups); ++} ++ ++static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev, ++ unsigned group) ++{ ++ return bcm6362_groups[group].name; ++} ++ ++static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, ++ unsigned group, const unsigned **pins, ++ unsigned *num_pins) ++{ ++ *pins = bcm6362_groups[group].pins; ++ *num_pins = bcm6362_groups[group].num_pins; ++ ++ return 0; ++} ++ ++static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm6362_funcs); ++} ++ ++static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev, ++ unsigned selector) ++{ ++ return bcm6362_funcs[selector].name; ++} ++ ++static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev, ++ unsigned selector, ++ const char * const **groups, ++ unsigned * const num_groups) ++{ ++ *groups = bcm6362_funcs[selector].groups; ++ *num_groups = bcm6362_funcs[selector].num_groups; ++ ++ return 0; ++} ++ ++static void bcm6362_set_gpio(struct bcm63xx_pinctrl *pc, unsigned pin) ++{ ++ const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin]; ++ unsigned int mask = bcm63xx_bank_pin(pin); ++ ++ if (desc->drv_data) ++ regmap_update_bits(pc->regs, BCM6362_BASEMODE_REG, ++ (uint32_t) desc->drv_data, 0); ++ ++ if (pin < BCM63XX_BANK_GPIOS) { ++ /* base mode 0 => gpio 1 => mux function */ ++ regmap_update_bits(pc->regs, BCM6362_MODE_REG, mask, 0); ++ ++ /* pins 0-23 might be muxed to led */ ++ if (pin < BCM6362_NUM_LEDS) ++ regmap_update_bits(pc->regs, BCM6362_LED_REG, mask, 0); ++ } else { ++ /* ctrl reg 0 => wifi function 1 => gpio */ ++ regmap_update_bits(pc->regs, BCM6362_CTRL_REG, mask, mask); ++ } ++} ++ ++static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev, ++ unsigned selector, unsigned group) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ const struct bcm6362_pingroup *pg = &bcm6362_groups[group]; ++ const struct bcm6362_function *f = &bcm6362_funcs[selector]; ++ unsigned i; ++ unsigned int reg; ++ unsigned int val, mask; ++ ++ for (i = 0; i < pg->num_pins; i++) ++ bcm6362_set_gpio(pc, pg->pins[i]); ++ ++ switch (f->reg) { ++ case BCM6362_LEDCTRL: ++ reg = BCM6362_LED_REG; ++ mask = BIT(pg->pins[0]); ++ val = BIT(pg->pins[0]); ++ break; ++ case BCM6362_MODE: ++ reg = BCM6362_MODE_REG; ++ mask = BIT(pg->pins[0]); ++ val = BIT(pg->pins[0]); ++ break; ++ case BCM6362_CTRL: ++ reg = BCM6362_CTRL_REG; ++ mask = BIT(pg->pins[0]); ++ val = 0; ++ break; ++ case BCM6362_BASEMODE: ++ reg = BCM6362_BASEMODE_REG; ++ mask = f->basemode_mask; ++ val = f->basemode_mask; ++ break; ++ default: ++ WARN_ON(1); ++ return -EINVAL; ++ } ++ ++ regmap_update_bits(pc->regs, reg, mask, val); ++ ++ return 0; ++} ++ ++static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev, ++ struct pinctrl_gpio_range *range, ++ unsigned offset) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ ++ /* disable all functions using this pin */ ++ bcm6362_set_gpio(pc, offset); ++ ++ return 0; ++} ++ ++static struct pinctrl_ops bcm6362_pctl_ops = { ++ .dt_free_map = pinctrl_utils_free_map, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .get_group_name = bcm6362_pinctrl_get_group_name, ++ .get_group_pins = bcm6362_pinctrl_get_group_pins, ++ .get_groups_count = bcm6362_pinctrl_get_group_count, ++}; ++ ++static struct pinmux_ops bcm6362_pmx_ops = { ++ .get_function_groups = bcm6362_pinctrl_get_groups, ++ .get_function_name = bcm6362_pinctrl_get_func_name, ++ .get_functions_count = bcm6362_pinctrl_get_func_count, ++ .gpio_request_enable = bcm6362_gpio_request_enable, ++ .set_mux = bcm6362_pinctrl_set_mux, ++ .strict = true, ++}; ++ ++static const struct bcm63xx_pinctrl_soc bcm6362_soc = { ++ .ngpios = BCM6362_NUM_GPIOS, ++ .npins = ARRAY_SIZE(bcm6362_pins), ++ .pctl_ops = &bcm6362_pctl_ops, ++ .pins = bcm6362_pins, ++ .pmx_ops = &bcm6362_pmx_ops, ++}; ++ ++static int bcm6362_pinctrl_probe(struct platform_device *pdev) ++{ ++ return bcm63xx_pinctrl_probe(pdev, &bcm6362_soc, NULL); ++} ++ ++static const struct of_device_id bcm6362_pinctrl_match[] = { ++ { .compatible = "brcm,bcm6362-pinctrl", }, ++ { /* sentinel */ } ++}; ++ ++static struct platform_driver bcm6362_pinctrl_driver = { ++ .probe = bcm6362_pinctrl_probe, ++ .driver = { ++ .name = "bcm6362-pinctrl", ++ .of_match_table = bcm6362_pinctrl_match, ++ }, ++}; ++ ++builtin_platform_driver(bcm6362_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/065-v5.13-dt-bindings-add-BCM6368-pincontroller-binding-docume.patch b/target/linux/bmips/patches-5.10/065-v5.13-dt-bindings-add-BCM6368-pincontroller-binding-docume.patch new file mode 100644 index 0000000000..e4e91e597f --- /dev/null +++ b/target/linux/bmips/patches-5.10/065-v5.13-dt-bindings-add-BCM6368-pincontroller-binding-docume.patch @@ -0,0 +1,242 @@ +From 9fbf8303796c89ecab026eb3dbadae7f98c49922 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:15 +0100 +Subject: [PATCH 14/22] dt-bindings: add BCM6368 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in BCM6368 SoCs. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-15-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../pinctrl/brcm,bcm6368-pinctrl.yaml | 217 ++++++++++++++++++ + 1 file changed, 217 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml +@@ -0,0 +1,217 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6368 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Bindings for Broadcom's BCM6368 memory-mapped pin controller. ++ ++properties: ++ compatible: ++ const: brcm,bcm6368-pinctrl ++ ++ reg: ++ maxItems: 2 ++ ++patternProperties: ++ '-pins$': ++ type: object ++ $ref: pinmux-node.yaml# ++ ++ properties: ++ function: ++ enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data, ++ serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led, ++ ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0, ++ robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb, ++ pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1, ++ pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4, ++ spi_cs5, uart1 ] ++ ++ pins: ++ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, ++ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, ++ gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23, ++ gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, ++ gpio31, uart1_grp ] ++ ++required: ++ - compatible ++ - reg ++ ++additionalProperties: false ++ ++examples: ++ - | ++ pinctrl@18 { ++ compatible = "brcm,bcm6368-pinctrl"; ++ reg = <0x18 0x4>, <0x38 0x4>; ++ ++ pinctrl_analog_afe_0: analog_afe_0-pins { ++ function = "analog_afe_0"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_analog_afe_1: analog_afe_1-pins { ++ function = "analog_afe_1"; ++ pins = "gpio1"; ++ }; ++ ++ pinctrl_sys_irq: sys_irq-pins { ++ function = "sys_irq"; ++ pins = "gpio2"; ++ }; ++ ++ pinctrl_serial_led: serial_led-pins { ++ pinctrl_serial_led_data: serial_led_data-pins { ++ function = "serial_led_data"; ++ pins = "gpio3"; ++ }; ++ ++ pinctrl_serial_led_clk: serial_led_clk-pins { ++ function = "serial_led_clk"; ++ pins = "gpio4"; ++ }; ++ }; ++ ++ pinctrl_inet_led: inet_led-pins { ++ function = "inet_led"; ++ pins = "gpio5"; ++ }; ++ ++ pinctrl_ephy0_led: ephy0_led-pins { ++ function = "ephy0_led"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_ephy1_led: ephy1_led-pins { ++ function = "ephy1_led"; ++ pins = "gpio7"; ++ }; ++ ++ pinctrl_ephy2_led: ephy2_led-pins { ++ function = "ephy2_led"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_ephy3_led: ephy3_led-pins { ++ function = "ephy3_led"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_robosw_led_data: robosw_led_data-pins { ++ function = "robosw_led_data"; ++ pins = "gpio10"; ++ }; ++ ++ pinctrl_robosw_led_clk: robosw_led_clk-pins { ++ function = "robosw_led_clk"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_robosw_led0: robosw_led0-pins { ++ function = "robosw_led0"; ++ pins = "gpio12"; ++ }; ++ ++ pinctrl_robosw_led1: robosw_led1-pins { ++ function = "robosw_led1"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_usb_device_led: usb_device_led-pins { ++ function = "usb_device_led"; ++ pins = "gpio14"; ++ }; ++ ++ pinctrl_pci: pci-pins { ++ pinctrl_pci_req1: pci_req1-pins { ++ function = "pci_req1"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_pci_gnt1: pci_gnt1-pins { ++ function = "pci_gnt1"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_pci_intb: pci_intb-pins { ++ function = "pci_intb"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_pci_req0: pci_req0-pins { ++ function = "pci_req0"; ++ pins = "gpio19"; ++ }; ++ ++ pinctrl_pci_gnt0: pci_gnt0-pins { ++ function = "pci_gnt0"; ++ pins = "gpio20"; ++ }; ++ }; ++ ++ pinctrl_pcmcia: pcmcia-pins { ++ pinctrl_pcmcia_cd1: pcmcia_cd1-pins { ++ function = "pcmcia_cd1"; ++ pins = "gpio22"; ++ }; ++ ++ pinctrl_pcmcia_cd2: pcmcia_cd2-pins { ++ function = "pcmcia_cd2"; ++ pins = "gpio23"; ++ }; ++ ++ pinctrl_pcmcia_vs1: pcmcia_vs1-pins { ++ function = "pcmcia_vs1"; ++ pins = "gpio24"; ++ }; ++ ++ pinctrl_pcmcia_vs2: pcmcia_vs2-pins { ++ function = "pcmcia_vs2"; ++ pins = "gpio25"; ++ }; ++ }; ++ ++ pinctrl_ebi_cs2: ebi_cs2-pins { ++ function = "ebi_cs2"; ++ pins = "gpio26"; ++ }; ++ ++ pinctrl_ebi_cs3: ebi_cs3-pins { ++ function = "ebi_cs3"; ++ pins = "gpio27"; ++ }; ++ ++ pinctrl_spi_cs2: spi_cs2-pins { ++ function = "spi_cs2"; ++ pins = "gpio28"; ++ }; ++ ++ pinctrl_spi_cs3: spi_cs3-pins { ++ function = "spi_cs3"; ++ pins = "gpio29"; ++ }; ++ ++ pinctrl_spi_cs4: spi_cs4-pins { ++ function = "spi_cs4"; ++ pins = "gpio30"; ++ }; ++ ++ pinctrl_spi_cs5: spi_cs5-pins { ++ function = "spi_cs5"; ++ pins = "gpio31"; ++ }; ++ ++ pinctrl_uart1: uart1-pins { ++ function = "uart1"; ++ group = "uart1_grp"; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/066-v5.13-dt-bindings-add-BCM6368-GPIO-sysctl-binding-document.patch b/target/linux/bmips/patches-5.10/066-v5.13-dt-bindings-add-BCM6368-GPIO-sysctl-binding-document.patch new file mode 100644 index 0000000000..d36cff6564 --- /dev/null +++ b/target/linux/bmips/patches-5.10/066-v5.13-dt-bindings-add-BCM6368-GPIO-sysctl-binding-document.patch @@ -0,0 +1,269 @@ +From fd22635f222f44dcb4dd6382d97de13144edad2b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:16 +0100 +Subject: [PATCH 15/22] dt-bindings: add BCM6368 GPIO sysctl binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the GPIO sysctl found in BCM6368 SoCs. + +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-16-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../mfd/brcm,bcm6368-gpio-sysctl.yaml | 246 ++++++++++++++++++ + 1 file changed, 246 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml +@@ -0,0 +1,246 @@ ++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6368 GPIO System Controller Device Tree Bindings ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Broadcom BCM6368 SoC GPIO system controller which provides a register map ++ for controlling the GPIO and pins of the SoC. ++ ++properties: ++ "#address-cells": true ++ ++ "#size-cells": true ++ ++ compatible: ++ items: ++ - const: brcm,bcm6368-gpio-sysctl ++ - const: syscon ++ - const: simple-mfd ++ ++ ranges: ++ maxItems: 1 ++ ++ reg: ++ maxItems: 1 ++ ++patternProperties: ++ "^gpio@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../gpio/brcm,bcm6345-gpio.yaml" ++ description: ++ GPIO controller for the SoC GPIOs. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. ++ ++ "^pinctrl@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml" ++ description: ++ Pin controller for the SoC pins. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml. ++ ++required: ++ - "#address-cells" ++ - compatible ++ - ranges ++ - reg ++ - "#size-cells" ++ ++additionalProperties: false ++ ++examples: ++ - | ++ syscon@10000080 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "brcm,bcm6368-gpio-sysctl", "syscon", "simple-mfd"; ++ reg = <0x10000080 0x80>; ++ ranges = <0 0x10000080 0x80>; ++ ++ gpio@0 { ++ compatible = "brcm,bcm6368-gpio"; ++ reg-names = "dirout", "dat"; ++ reg = <0x0 0x8>, <0x8 0x8>; ++ ++ gpio-controller; ++ gpio-ranges = <&pinctrl 0 0 38>; ++ #gpio-cells = <2>; ++ }; ++ ++ pinctrl: pinctrl@18 { ++ compatible = "brcm,bcm6368-pinctrl"; ++ reg = <0x18 0x4>, <0x38 0x4>; ++ ++ pinctrl_analog_afe_0: analog_afe_0-pins { ++ function = "analog_afe_0"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_analog_afe_1: analog_afe_1-pins { ++ function = "analog_afe_1"; ++ pins = "gpio1"; ++ }; ++ ++ pinctrl_sys_irq: sys_irq-pins { ++ function = "sys_irq"; ++ pins = "gpio2"; ++ }; ++ ++ pinctrl_serial_led: serial_led-pins { ++ pinctrl_serial_led_data: serial_led_data-pins { ++ function = "serial_led_data"; ++ pins = "gpio3"; ++ }; ++ ++ pinctrl_serial_led_clk: serial_led_clk-pins { ++ function = "serial_led_clk"; ++ pins = "gpio4"; ++ }; ++ }; ++ ++ pinctrl_inet_led: inet_led-pins { ++ function = "inet_led"; ++ pins = "gpio5"; ++ }; ++ ++ pinctrl_ephy0_led: ephy0_led-pins { ++ function = "ephy0_led"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_ephy1_led: ephy1_led-pins { ++ function = "ephy1_led"; ++ pins = "gpio7"; ++ }; ++ ++ pinctrl_ephy2_led: ephy2_led-pins { ++ function = "ephy2_led"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_ephy3_led: ephy3_led-pins { ++ function = "ephy3_led"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_robosw_led_data: robosw_led_data-pins { ++ function = "robosw_led_data"; ++ pins = "gpio10"; ++ }; ++ ++ pinctrl_robosw_led_clk: robosw_led_clk-pins { ++ function = "robosw_led_clk"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_robosw_led0: robosw_led0-pins { ++ function = "robosw_led0"; ++ pins = "gpio12"; ++ }; ++ ++ pinctrl_robosw_led1: robosw_led1-pins { ++ function = "robosw_led1"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_usb_device_led: usb_device_led-pins { ++ function = "usb_device_led"; ++ pins = "gpio14"; ++ }; ++ ++ pinctrl_pci: pci-pins { ++ pinctrl_pci_req1: pci_req1-pins { ++ function = "pci_req1"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_pci_gnt1: pci_gnt1-pins { ++ function = "pci_gnt1"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_pci_intb: pci_intb-pins { ++ function = "pci_intb"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_pci_req0: pci_req0-pins { ++ function = "pci_req0"; ++ pins = "gpio19"; ++ }; ++ ++ pinctrl_pci_gnt0: pci_gnt0-pins { ++ function = "pci_gnt0"; ++ pins = "gpio20"; ++ }; ++ }; ++ ++ pinctrl_pcmcia: pcmcia-pins { ++ pinctrl_pcmcia_cd1: pcmcia_cd1-pins { ++ function = "pcmcia_cd1"; ++ pins = "gpio22"; ++ }; ++ ++ pinctrl_pcmcia_cd2: pcmcia_cd2-pins { ++ function = "pcmcia_cd2"; ++ pins = "gpio23"; ++ }; ++ ++ pinctrl_pcmcia_vs1: pcmcia_vs1-pins { ++ function = "pcmcia_vs1"; ++ pins = "gpio24"; ++ }; ++ ++ pinctrl_pcmcia_vs2: pcmcia_vs2-pins { ++ function = "pcmcia_vs2"; ++ pins = "gpio25"; ++ }; ++ }; ++ ++ pinctrl_ebi_cs2: ebi_cs2-pins { ++ function = "ebi_cs2"; ++ pins = "gpio26"; ++ }; ++ ++ pinctrl_ebi_cs3: ebi_cs3-pins { ++ function = "ebi_cs3"; ++ pins = "gpio27"; ++ }; ++ ++ pinctrl_spi_cs2: spi_cs2-pins { ++ function = "spi_cs2"; ++ pins = "gpio28"; ++ }; ++ ++ pinctrl_spi_cs3: spi_cs3-pins { ++ function = "spi_cs3"; ++ pins = "gpio29"; ++ }; ++ ++ pinctrl_spi_cs4: spi_cs4-pins { ++ function = "spi_cs4"; ++ pins = "gpio30"; ++ }; ++ ++ pinctrl_spi_cs5: spi_cs5-pins { ++ function = "spi_cs5"; ++ pins = "gpio31"; ++ }; ++ ++ pinctrl_uart1: uart1-pins { ++ function = "uart1"; ++ group = "uart1_grp"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/067-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch b/target/linux/bmips/patches-5.10/067-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch new file mode 100644 index 0000000000..3965762407 --- /dev/null +++ b/target/linux/bmips/patches-5.10/067-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch @@ -0,0 +1,576 @@ +From 50554accf7a79980cd04481e8903073bdb706daf Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:17 +0100 +Subject: [PATCH 16/22] pinctrl: add a pincontrol driver for BCM6368 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32 +GPIOs onto alternative functions. Not all are documented. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Link: https://lore.kernel.org/r/20210324081923.20379-17-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/bcm/Kconfig | 8 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm6368.c | 523 ++++++++++++++++++++++++++ + 3 files changed, 532 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c + +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -60,6 +60,14 @@ config PINCTRL_BCM6362 + help + Say Y here to enable the Broadcom BCM6362 GPIO driver. + ++config PINCTRL_BCM6368 ++ bool "Broadcom BCM6368 GPIO driver" ++ depends on (BMIPS_GENERIC || COMPILE_TEST) ++ select PINCTRL_BCM63XX ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM6368 GPIO driver. ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctr + obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o + obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o + obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o ++obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o +--- /dev/null ++++ b/drivers/pinctrl/bcm/pinctrl-bcm6368.c +@@ -0,0 +1,523 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Driver for BCM6368 GPIO unit (pinctrl + GPIO) ++ * ++ * Copyright (C) 2021 Álvaro Fernández Rojas ++ * Copyright (C) 2016 Jonas Gorski ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../pinctrl-utils.h" ++ ++#include "pinctrl-bcm63xx.h" ++ ++#define BCM6368_NUM_GPIOS 38 ++ ++#define BCM6368_MODE_REG 0x18 ++#define BCM6368_BASEMODE_REG 0x38 ++#define BCM6368_BASEMODE_MASK 0x7 ++#define BCM6368_BASEMODE_GPIO 0x0 ++#define BCM6368_BASEMODE_UART1 0x1 ++ ++struct bcm6368_pingroup { ++ const char *name; ++ const unsigned * const pins; ++ const unsigned num_pins; ++}; ++ ++struct bcm6368_function { ++ const char *name; ++ const char * const *groups; ++ const unsigned num_groups; ++ ++ unsigned dir_out:16; ++ unsigned basemode:3; ++}; ++ ++struct bcm6368_priv { ++ struct regmap_field *overlays; ++}; ++ ++#define BCM6368_BASEMODE_PIN(a, b) \ ++ { \ ++ .number = a, \ ++ .name = b, \ ++ .drv_data = (void *)true \ ++ } ++ ++static const struct pinctrl_pin_desc bcm6368_pins[] = { ++ PINCTRL_PIN(0, "gpio0"), ++ PINCTRL_PIN(1, "gpio1"), ++ PINCTRL_PIN(2, "gpio2"), ++ PINCTRL_PIN(3, "gpio3"), ++ PINCTRL_PIN(4, "gpio4"), ++ PINCTRL_PIN(5, "gpio5"), ++ PINCTRL_PIN(6, "gpio6"), ++ PINCTRL_PIN(7, "gpio7"), ++ PINCTRL_PIN(8, "gpio8"), ++ PINCTRL_PIN(9, "gpio9"), ++ PINCTRL_PIN(10, "gpio10"), ++ PINCTRL_PIN(11, "gpio11"), ++ PINCTRL_PIN(12, "gpio12"), ++ PINCTRL_PIN(13, "gpio13"), ++ PINCTRL_PIN(14, "gpio14"), ++ PINCTRL_PIN(15, "gpio15"), ++ PINCTRL_PIN(16, "gpio16"), ++ PINCTRL_PIN(17, "gpio17"), ++ PINCTRL_PIN(18, "gpio18"), ++ PINCTRL_PIN(19, "gpio19"), ++ PINCTRL_PIN(20, "gpio20"), ++ PINCTRL_PIN(21, "gpio21"), ++ PINCTRL_PIN(22, "gpio22"), ++ PINCTRL_PIN(23, "gpio23"), ++ PINCTRL_PIN(24, "gpio24"), ++ PINCTRL_PIN(25, "gpio25"), ++ PINCTRL_PIN(26, "gpio26"), ++ PINCTRL_PIN(27, "gpio27"), ++ PINCTRL_PIN(28, "gpio28"), ++ PINCTRL_PIN(29, "gpio29"), ++ BCM6368_BASEMODE_PIN(30, "gpio30"), ++ BCM6368_BASEMODE_PIN(31, "gpio31"), ++ BCM6368_BASEMODE_PIN(32, "gpio32"), ++ BCM6368_BASEMODE_PIN(33, "gpio33"), ++ PINCTRL_PIN(34, "gpio34"), ++ PINCTRL_PIN(35, "gpio35"), ++ PINCTRL_PIN(36, "gpio36"), ++ PINCTRL_PIN(37, "gpio37"), ++}; ++ ++static unsigned gpio0_pins[] = { 0 }; ++static unsigned gpio1_pins[] = { 1 }; ++static unsigned gpio2_pins[] = { 2 }; ++static unsigned gpio3_pins[] = { 3 }; ++static unsigned gpio4_pins[] = { 4 }; ++static unsigned gpio5_pins[] = { 5 }; ++static unsigned gpio6_pins[] = { 6 }; ++static unsigned gpio7_pins[] = { 7 }; ++static unsigned gpio8_pins[] = { 8 }; ++static unsigned gpio9_pins[] = { 9 }; ++static unsigned gpio10_pins[] = { 10 }; ++static unsigned gpio11_pins[] = { 11 }; ++static unsigned gpio12_pins[] = { 12 }; ++static unsigned gpio13_pins[] = { 13 }; ++static unsigned gpio14_pins[] = { 14 }; ++static unsigned gpio15_pins[] = { 15 }; ++static unsigned gpio16_pins[] = { 16 }; ++static unsigned gpio17_pins[] = { 17 }; ++static unsigned gpio18_pins[] = { 18 }; ++static unsigned gpio19_pins[] = { 19 }; ++static unsigned gpio20_pins[] = { 20 }; ++static unsigned gpio21_pins[] = { 21 }; ++static unsigned gpio22_pins[] = { 22 }; ++static unsigned gpio23_pins[] = { 23 }; ++static unsigned gpio24_pins[] = { 24 }; ++static unsigned gpio25_pins[] = { 25 }; ++static unsigned gpio26_pins[] = { 26 }; ++static unsigned gpio27_pins[] = { 27 }; ++static unsigned gpio28_pins[] = { 28 }; ++static unsigned gpio29_pins[] = { 29 }; ++static unsigned gpio30_pins[] = { 30 }; ++static unsigned gpio31_pins[] = { 31 }; ++static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 }; ++ ++#define BCM6368_GROUP(n) \ ++ { \ ++ .name = #n, \ ++ .pins = n##_pins, \ ++ .num_pins = ARRAY_SIZE(n##_pins), \ ++ } ++ ++static struct bcm6368_pingroup bcm6368_groups[] = { ++ BCM6368_GROUP(gpio0), ++ BCM6368_GROUP(gpio1), ++ BCM6368_GROUP(gpio2), ++ BCM6368_GROUP(gpio3), ++ BCM6368_GROUP(gpio4), ++ BCM6368_GROUP(gpio5), ++ BCM6368_GROUP(gpio6), ++ BCM6368_GROUP(gpio7), ++ BCM6368_GROUP(gpio8), ++ BCM6368_GROUP(gpio9), ++ BCM6368_GROUP(gpio10), ++ BCM6368_GROUP(gpio11), ++ BCM6368_GROUP(gpio12), ++ BCM6368_GROUP(gpio13), ++ BCM6368_GROUP(gpio14), ++ BCM6368_GROUP(gpio15), ++ BCM6368_GROUP(gpio16), ++ BCM6368_GROUP(gpio17), ++ BCM6368_GROUP(gpio18), ++ BCM6368_GROUP(gpio19), ++ BCM6368_GROUP(gpio20), ++ BCM6368_GROUP(gpio21), ++ BCM6368_GROUP(gpio22), ++ BCM6368_GROUP(gpio23), ++ BCM6368_GROUP(gpio24), ++ BCM6368_GROUP(gpio25), ++ BCM6368_GROUP(gpio26), ++ BCM6368_GROUP(gpio27), ++ BCM6368_GROUP(gpio28), ++ BCM6368_GROUP(gpio29), ++ BCM6368_GROUP(gpio30), ++ BCM6368_GROUP(gpio31), ++ BCM6368_GROUP(uart1_grp), ++}; ++ ++static const char * const analog_afe_0_groups[] = { ++ "gpio0", ++}; ++ ++static const char * const analog_afe_1_groups[] = { ++ "gpio1", ++}; ++ ++static const char * const sys_irq_groups[] = { ++ "gpio2", ++}; ++ ++static const char * const serial_led_data_groups[] = { ++ "gpio3", ++}; ++ ++static const char * const serial_led_clk_groups[] = { ++ "gpio4", ++}; ++ ++static const char * const inet_led_groups[] = { ++ "gpio5", ++}; ++ ++static const char * const ephy0_led_groups[] = { ++ "gpio6", ++}; ++ ++static const char * const ephy1_led_groups[] = { ++ "gpio7", ++}; ++ ++static const char * const ephy2_led_groups[] = { ++ "gpio8", ++}; ++ ++static const char * const ephy3_led_groups[] = { ++ "gpio9", ++}; ++ ++static const char * const robosw_led_data_groups[] = { ++ "gpio10", ++}; ++ ++static const char * const robosw_led_clk_groups[] = { ++ "gpio11", ++}; ++ ++static const char * const robosw_led0_groups[] = { ++ "gpio12", ++}; ++ ++static const char * const robosw_led1_groups[] = { ++ "gpio13", ++}; ++ ++static const char * const usb_device_led_groups[] = { ++ "gpio14", ++}; ++ ++static const char * const pci_req1_groups[] = { ++ "gpio16", ++}; ++ ++static const char * const pci_gnt1_groups[] = { ++ "gpio17", ++}; ++ ++static const char * const pci_intb_groups[] = { ++ "gpio18", ++}; ++ ++static const char * const pci_req0_groups[] = { ++ "gpio19", ++}; ++ ++static const char * const pci_gnt0_groups[] = { ++ "gpio20", ++}; ++ ++static const char * const pcmcia_cd1_groups[] = { ++ "gpio22", ++}; ++ ++static const char * const pcmcia_cd2_groups[] = { ++ "gpio23", ++}; ++ ++static const char * const pcmcia_vs1_groups[] = { ++ "gpio24", ++}; ++ ++static const char * const pcmcia_vs2_groups[] = { ++ "gpio25", ++}; ++ ++static const char * const ebi_cs2_groups[] = { ++ "gpio26", ++}; ++ ++static const char * const ebi_cs3_groups[] = { ++ "gpio27", ++}; ++ ++static const char * const spi_cs2_groups[] = { ++ "gpio28", ++}; ++ ++static const char * const spi_cs3_groups[] = { ++ "gpio29", ++}; ++ ++static const char * const spi_cs4_groups[] = { ++ "gpio30", ++}; ++ ++static const char * const spi_cs5_groups[] = { ++ "gpio31", ++}; ++ ++static const char * const uart1_groups[] = { ++ "uart1_grp", ++}; ++ ++#define BCM6368_FUN(n, out) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .dir_out = out, \ ++ } ++ ++#define BCM6368_BASEMODE_FUN(n, val, out) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .basemode = BCM6368_BASEMODE_##val, \ ++ .dir_out = out, \ ++ } ++ ++static const struct bcm6368_function bcm6368_funcs[] = { ++ BCM6368_FUN(analog_afe_0, 1), ++ BCM6368_FUN(analog_afe_1, 1), ++ BCM6368_FUN(sys_irq, 1), ++ BCM6368_FUN(serial_led_data, 1), ++ BCM6368_FUN(serial_led_clk, 1), ++ BCM6368_FUN(inet_led, 1), ++ BCM6368_FUN(ephy0_led, 1), ++ BCM6368_FUN(ephy1_led, 1), ++ BCM6368_FUN(ephy2_led, 1), ++ BCM6368_FUN(ephy3_led, 1), ++ BCM6368_FUN(robosw_led_data, 1), ++ BCM6368_FUN(robosw_led_clk, 1), ++ BCM6368_FUN(robosw_led0, 1), ++ BCM6368_FUN(robosw_led1, 1), ++ BCM6368_FUN(usb_device_led, 1), ++ BCM6368_FUN(pci_req1, 0), ++ BCM6368_FUN(pci_gnt1, 0), ++ BCM6368_FUN(pci_intb, 0), ++ BCM6368_FUN(pci_req0, 0), ++ BCM6368_FUN(pci_gnt0, 0), ++ BCM6368_FUN(pcmcia_cd1, 0), ++ BCM6368_FUN(pcmcia_cd2, 0), ++ BCM6368_FUN(pcmcia_vs1, 0), ++ BCM6368_FUN(pcmcia_vs2, 0), ++ BCM6368_FUN(ebi_cs2, 1), ++ BCM6368_FUN(ebi_cs3, 1), ++ BCM6368_FUN(spi_cs2, 1), ++ BCM6368_FUN(spi_cs3, 1), ++ BCM6368_FUN(spi_cs4, 1), ++ BCM6368_FUN(spi_cs5, 1), ++ BCM6368_BASEMODE_FUN(uart1, UART1, 0x6), ++}; ++ ++static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm6368_groups); ++} ++ ++static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev, ++ unsigned group) ++{ ++ return bcm6368_groups[group].name; ++} ++ ++static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, ++ unsigned group, const unsigned **pins, ++ unsigned *num_pins) ++{ ++ *pins = bcm6368_groups[group].pins; ++ *num_pins = bcm6368_groups[group].num_pins; ++ ++ return 0; ++} ++ ++static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm6368_funcs); ++} ++ ++static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev, ++ unsigned selector) ++{ ++ return bcm6368_funcs[selector].name; ++} ++ ++static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev, ++ unsigned selector, ++ const char * const **groups, ++ unsigned * const num_groups) ++{ ++ *groups = bcm6368_funcs[selector].groups; ++ *num_groups = bcm6368_funcs[selector].num_groups; ++ ++ return 0; ++} ++ ++static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev, ++ unsigned selector, unsigned group) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ struct bcm6368_priv *priv = pc->driver_data; ++ const struct bcm6368_pingroup *pg = &bcm6368_groups[group]; ++ const struct bcm6368_function *fun = &bcm6368_funcs[selector]; ++ int i, pin; ++ ++ if (fun->basemode) { ++ unsigned int mask = 0; ++ ++ for (i = 0; i < pg->num_pins; i++) { ++ pin = pg->pins[i]; ++ if (pin < BCM63XX_BANK_GPIOS) ++ mask |= BIT(pin); ++ } ++ ++ regmap_update_bits(pc->regs, BCM6368_MODE_REG, mask, 0); ++ regmap_field_write(priv->overlays, fun->basemode); ++ } else { ++ pin = pg->pins[0]; ++ ++ if (bcm6368_pins[pin].drv_data) ++ regmap_field_write(priv->overlays, ++ BCM6368_BASEMODE_GPIO); ++ ++ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(pin), ++ BIT(pin)); ++ } ++ ++ for (pin = 0; pin < pg->num_pins; pin++) { ++ struct pinctrl_gpio_range *range; ++ int hw_gpio = bcm6368_pins[pin].number; ++ ++ range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio); ++ if (range) { ++ struct gpio_chip *gc = range->gc; ++ ++ if (fun->dir_out & BIT(pin)) ++ gc->direction_output(gc, hw_gpio, 0); ++ else ++ gc->direction_input(gc, hw_gpio); ++ } ++ } ++ ++ return 0; ++} ++ ++static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev, ++ struct pinctrl_gpio_range *range, ++ unsigned offset) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ struct bcm6368_priv *priv = pc->driver_data; ++ ++ if (offset >= BCM63XX_BANK_GPIOS && !bcm6368_pins[offset].drv_data) ++ return 0; ++ ++ /* disable all functions using this pin */ ++ if (offset < BCM63XX_BANK_GPIOS) ++ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(offset), 0); ++ ++ if (bcm6368_pins[offset].drv_data) ++ regmap_field_write(priv->overlays, BCM6368_BASEMODE_GPIO); ++ ++ return 0; ++} ++ ++static struct pinctrl_ops bcm6368_pctl_ops = { ++ .dt_free_map = pinctrl_utils_free_map, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .get_group_name = bcm6368_pinctrl_get_group_name, ++ .get_group_pins = bcm6368_pinctrl_get_group_pins, ++ .get_groups_count = bcm6368_pinctrl_get_group_count, ++}; ++ ++static struct pinmux_ops bcm6368_pmx_ops = { ++ .get_function_groups = bcm6368_pinctrl_get_groups, ++ .get_function_name = bcm6368_pinctrl_get_func_name, ++ .get_functions_count = bcm6368_pinctrl_get_func_count, ++ .gpio_request_enable = bcm6368_gpio_request_enable, ++ .set_mux = bcm6368_pinctrl_set_mux, ++ .strict = true, ++}; ++ ++static const struct bcm63xx_pinctrl_soc bcm6368_soc = { ++ .ngpios = BCM6368_NUM_GPIOS, ++ .npins = ARRAY_SIZE(bcm6368_pins), ++ .pctl_ops = &bcm6368_pctl_ops, ++ .pins = bcm6368_pins, ++ .pmx_ops = &bcm6368_pmx_ops, ++}; ++ ++static int bcm6368_pinctrl_probe(struct platform_device *pdev) ++{ ++ struct reg_field overlays = REG_FIELD(BCM6368_BASEMODE_REG, 0, 15); ++ struct device *dev = &pdev->dev; ++ struct bcm63xx_pinctrl *pc; ++ struct bcm6368_priv *priv; ++ int err; ++ ++ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ err = bcm63xx_pinctrl_probe(pdev, &bcm6368_soc, (void *) priv); ++ if (err) ++ return err; ++ ++ pc = platform_get_drvdata(pdev); ++ ++ priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays); ++ if (IS_ERR(priv->overlays)) ++ return PTR_ERR(priv->overlays); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcm6368_pinctrl_match[] = { ++ { .compatible = "brcm,bcm6368-pinctrl", }, ++ { /* sentinel */ } ++}; ++ ++static struct platform_driver bcm6368_pinctrl_driver = { ++ .probe = bcm6368_pinctrl_probe, ++ .driver = { ++ .name = "bcm6368-pinctrl", ++ .of_match_table = bcm6368_pinctrl_match, ++ }, ++}; ++ ++builtin_platform_driver(bcm6368_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/068-v5.13-dt-bindings-add-BCM63268-pincontroller-binding-docum.patch b/target/linux/bmips/patches-5.10/068-v5.13-dt-bindings-add-BCM63268-pincontroller-binding-docum.patch new file mode 100644 index 0000000000..bffc1ab02f --- /dev/null +++ b/target/linux/bmips/patches-5.10/068-v5.13-dt-bindings-add-BCM63268-pincontroller-binding-docum.patch @@ -0,0 +1,190 @@ +From 9b3303413379af8bed307cd465fe7aa1bc3569ea Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:18 +0100 +Subject: [PATCH 17/22] dt-bindings: add BCM63268 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in the BCM63268 +family SoCs. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-18-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../pinctrl/brcm,bcm63268-pinctrl.yaml | 164 ++++++++++++++++++ + 1 file changed, 164 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml +@@ -0,0 +1,164 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM63268 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Bindings for Broadcom's BCM63268 memory-mapped pin controller. ++ ++properties: ++ compatible: ++ const: brcm,bcm63268-pinctrl ++ ++ reg: ++ maxItems: 3 ++ ++patternProperties: ++ '-pins$': ++ type: object ++ $ref: pinmux-node.yaml# ++ ++ properties: ++ function: ++ enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5, ++ hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi, ++ vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data, ++ nand, gpio35_alt, dectpd, vdsl_phy_override_0, ++ vdsl_phy_override_1, vdsl_phy_override_2, ++ vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ] ++ ++ pins: ++ enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19, ++ gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35 ++ dectpd_grp, vdsl_phy_override_0_grp, ++ vdsl_phy_override_1_grp, vdsl_phy_override_2_grp, ++ vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] ++ ++required: ++ - compatible ++ - reg ++ ++additionalProperties: false ++ ++examples: ++ - | ++ pinctrl@10 { ++ compatible = "brcm,bcm63268-pinctrl"; ++ reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>; ++ ++ pinctrl_serial_led: serial_led-pins { ++ pinctrl_serial_led_clk: serial_led_clk-pins { ++ function = "serial_led_clk"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_serial_led_data: serial_led_data-pins { ++ function = "serial_led_data"; ++ pins = "gpio1"; ++ }; ++ }; ++ ++ pinctrl_hsspi_cs4: hsspi_cs4-pins { ++ function = "hsspi_cs4"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_hsspi_cs5: hsspi_cs5-pins { ++ function = "hsspi_cs5"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_hsspi_cs6: hsspi_cs6-pins { ++ function = "hsspi_cs6"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_hsspi_cs7: hsspi_cs7-pins { ++ function = "hsspi_cs7"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_adsl_spi: adsl_spi-pins { ++ pinctrl_adsl_spi_miso: adsl_spi_miso-pins { ++ function = "adsl_spi_miso"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { ++ function = "adsl_spi_mosi"; ++ pins = "gpio19"; ++ }; ++ }; ++ ++ pinctrl_vreq_clk: vreq_clk-pins { ++ function = "vreq_clk"; ++ pins = "gpio22"; ++ }; ++ ++ pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins { ++ function = "pcie_clkreq_b"; ++ pins = "gpio23"; ++ }; ++ ++ pinctrl_robosw_led_clk: robosw_led_clk-pins { ++ function = "robosw_led_clk"; ++ pins = "gpio30"; ++ }; ++ ++ pinctrl_robosw_led_data: robosw_led_data-pins { ++ function = "robosw_led_data"; ++ pins = "gpio31"; ++ }; ++ ++ pinctrl_nand: nand-pins { ++ function = "nand"; ++ group = "nand_grp"; ++ }; ++ ++ pinctrl_gpio35_alt: gpio35_alt-pins { ++ function = "gpio35_alt"; ++ pin = "gpio35"; ++ }; ++ ++ pinctrl_dectpd: dectpd-pins { ++ function = "dectpd"; ++ group = "dectpd_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { ++ function = "vdsl_phy_override_0"; ++ group = "vdsl_phy_override_0_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { ++ function = "vdsl_phy_override_1"; ++ group = "vdsl_phy_override_1_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { ++ function = "vdsl_phy_override_2"; ++ group = "vdsl_phy_override_2_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { ++ function = "vdsl_phy_override_3"; ++ group = "vdsl_phy_override_3_grp"; ++ }; ++ ++ pinctrl_dsl_gpio8: dsl_gpio8-pins { ++ function = "dsl_gpio8"; ++ group = "dsl_gpio8"; ++ }; ++ ++ pinctrl_dsl_gpio9: dsl_gpio9-pins { ++ function = "dsl_gpio9"; ++ group = "dsl_gpio9"; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/069-v5.13-dt-bindings-add-BCM63268-GPIO-sysctl-binding-documen.patch b/target/linux/bmips/patches-5.10/069-v5.13-dt-bindings-add-BCM63268-GPIO-sysctl-binding-documen.patch new file mode 100644 index 0000000000..a130d60d42 --- /dev/null +++ b/target/linux/bmips/patches-5.10/069-v5.13-dt-bindings-add-BCM63268-GPIO-sysctl-binding-documen.patch @@ -0,0 +1,217 @@ +From ff8324355d7ae2e4ebbd304de27bb5fa75e20c6a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:19 +0100 +Subject: [PATCH 18/22] dt-bindings: add BCM63268 GPIO sysctl binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the GPIO sysctl found in BCM63268 SoCs. + +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-19-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../mfd/brcm,bcm63268-gpio-sysctl.yaml | 194 ++++++++++++++++++ + 1 file changed, 194 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml +@@ -0,0 +1,194 @@ ++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM63268 GPIO System Controller Device Tree Bindings ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Broadcom BCM63268 SoC GPIO system controller which provides a register map ++ for controlling the GPIO and pins of the SoC. ++ ++properties: ++ "#address-cells": true ++ ++ "#size-cells": true ++ ++ compatible: ++ items: ++ - const: brcm,bcm63268-gpio-sysctl ++ - const: syscon ++ - const: simple-mfd ++ ++ ranges: ++ maxItems: 1 ++ ++ reg: ++ maxItems: 1 ++ ++patternProperties: ++ "^gpio@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../gpio/brcm,bcm6345-gpio.yaml" ++ description: ++ GPIO controller for the SoC GPIOs. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. ++ ++ "^pinctrl@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml" ++ description: ++ Pin controller for the SoC pins. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml. ++ ++required: ++ - "#address-cells" ++ - compatible ++ - ranges ++ - reg ++ - "#size-cells" ++ ++additionalProperties: false ++ ++examples: ++ - | ++ syscon@100000c0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "brcm,bcm63268-gpio-sysctl", "syscon", "simple-mfd"; ++ reg = <0x100000c0 0x80>; ++ ranges = <0 0x100000c0 0x80>; ++ ++ gpio@0 { ++ compatible = "brcm,bcm63268-gpio"; ++ reg-names = "dirout", "dat"; ++ reg = <0x0 0x8>, <0x8 0x8>; ++ ++ gpio-controller; ++ gpio-ranges = <&pinctrl 0 0 52>; ++ #gpio-cells = <2>; ++ }; ++ ++ pinctrl: pinctrl@10 { ++ compatible = "brcm,bcm63268-pinctrl"; ++ reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>; ++ ++ pinctrl_serial_led: serial_led-pins { ++ pinctrl_serial_led_clk: serial_led_clk-pins { ++ function = "serial_led_clk"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_serial_led_data: serial_led_data-pins { ++ function = "serial_led_data"; ++ pins = "gpio1"; ++ }; ++ }; ++ ++ pinctrl_hsspi_cs4: hsspi_cs4-pins { ++ function = "hsspi_cs4"; ++ pins = "gpio16"; ++ }; ++ ++ pinctrl_hsspi_cs5: hsspi_cs5-pins { ++ function = "hsspi_cs5"; ++ pins = "gpio17"; ++ }; ++ ++ pinctrl_hsspi_cs6: hsspi_cs6-pins { ++ function = "hsspi_cs6"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_hsspi_cs7: hsspi_cs7-pins { ++ function = "hsspi_cs7"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_adsl_spi: adsl_spi-pins { ++ pinctrl_adsl_spi_miso: adsl_spi_miso-pins { ++ function = "adsl_spi_miso"; ++ pins = "gpio18"; ++ }; ++ ++ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { ++ function = "adsl_spi_mosi"; ++ pins = "gpio19"; ++ }; ++ }; ++ ++ pinctrl_vreq_clk: vreq_clk-pins { ++ function = "vreq_clk"; ++ pins = "gpio22"; ++ }; ++ ++ pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins { ++ function = "pcie_clkreq_b"; ++ pins = "gpio23"; ++ }; ++ ++ pinctrl_robosw_led_clk: robosw_led_clk-pins { ++ function = "robosw_led_clk"; ++ pins = "gpio30"; ++ }; ++ ++ pinctrl_robosw_led_data: robosw_led_data-pins { ++ function = "robosw_led_data"; ++ pins = "gpio31"; ++ }; ++ ++ pinctrl_nand: nand-pins { ++ function = "nand"; ++ group = "nand_grp"; ++ }; ++ ++ pinctrl_gpio35_alt: gpio35_alt-pins { ++ function = "gpio35_alt"; ++ pin = "gpio35"; ++ }; ++ ++ pinctrl_dectpd: dectpd-pins { ++ function = "dectpd"; ++ group = "dectpd_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { ++ function = "vdsl_phy_override_0"; ++ group = "vdsl_phy_override_0_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { ++ function = "vdsl_phy_override_1"; ++ group = "vdsl_phy_override_1_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { ++ function = "vdsl_phy_override_2"; ++ group = "vdsl_phy_override_2_grp"; ++ }; ++ ++ pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { ++ function = "vdsl_phy_override_3"; ++ group = "vdsl_phy_override_3_grp"; ++ }; ++ ++ pinctrl_dsl_gpio8: dsl_gpio8-pins { ++ function = "dsl_gpio8"; ++ group = "dsl_gpio8"; ++ }; ++ ++ pinctrl_dsl_gpio9: dsl_gpio9-pins { ++ function = "dsl_gpio9"; ++ group = "dsl_gpio9"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/070-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch b/target/linux/bmips/patches-5.10/070-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch new file mode 100644 index 0000000000..933af5fb51 --- /dev/null +++ b/target/linux/bmips/patches-5.10/070-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch @@ -0,0 +1,697 @@ +From 155cca1b0794a8f541e7eaa45be70df0a49964f3 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:20 +0100 +Subject: [PATCH 19/22] pinctrl: add a pincontrol driver for BCM63268 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs +to different functions. Depending on the mux, these are either single +pin configurations or whole pin groups. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Link: https://lore.kernel.org/r/20210324081923.20379-20-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/bcm/Kconfig | 8 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm63268.c | 643 +++++++++++++++++++++++++ + 3 files changed, 652 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63268.c + +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -68,6 +68,14 @@ config PINCTRL_BCM6368 + help + Say Y here to enable the Broadcom BCM6368 GPIO driver. + ++config PINCTRL_BCM63268 ++ bool "Broadcom BCM63268 GPIO driver" ++ depends on (BMIPS_GENERIC || COMPILE_TEST) ++ select PINCTRL_BCM63XX ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM63268 GPIO driver. ++ + config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -8,6 +8,7 @@ obj-$(CONFIG_PINCTRL_BCM6328) += pinctr + obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o + obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o + obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o ++obj-$(CONFIG_PINCTRL_BCM63268) += pinctrl-bcm63268.o + obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o + obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o + obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o +--- /dev/null ++++ b/drivers/pinctrl/bcm/pinctrl-bcm63268.c +@@ -0,0 +1,643 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Driver for BCM63268 GPIO unit (pinctrl + GPIO) ++ * ++ * Copyright (C) 2021 Álvaro Fernández Rojas ++ * Copyright (C) 2016 Jonas Gorski ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../pinctrl-utils.h" ++ ++#include "pinctrl-bcm63xx.h" ++ ++#define BCM63268_NUM_GPIOS 52 ++#define BCM63268_NUM_LEDS 24 ++ ++#define BCM63268_LED_REG 0x10 ++#define BCM63268_MODE_REG 0x18 ++#define BCM63268_CTRL_REG 0x1c ++#define BCM63268_BASEMODE_REG 0x38 ++#define BCM63268_BASEMODE_NAND BIT(2) /* GPIOs 2-7, 24-31 */ ++#define BCM63268_BASEMODE_GPIO35 BIT(4) /* GPIO 35 */ ++#define BCM63268_BASEMODE_DECTPD BIT(5) /* GPIOs 8/9 */ ++#define BCM63268_BASEMODE_VDSL_PHY_0 BIT(6) /* GPIOs 10/11 */ ++#define BCM63268_BASEMODE_VDSL_PHY_1 BIT(7) /* GPIOs 12/13 */ ++#define BCM63268_BASEMODE_VDSL_PHY_2 BIT(8) /* GPIOs 24/25 */ ++#define BCM63268_BASEMODE_VDSL_PHY_3 BIT(9) /* GPIOs 26/27 */ ++ ++enum bcm63268_pinctrl_reg { ++ BCM63268_LEDCTRL, ++ BCM63268_MODE, ++ BCM63268_CTRL, ++ BCM63268_BASEMODE, ++}; ++ ++struct bcm63268_pingroup { ++ const char *name; ++ const unsigned * const pins; ++ const unsigned num_pins; ++}; ++ ++struct bcm63268_function { ++ const char *name; ++ const char * const *groups; ++ const unsigned num_groups; ++ ++ enum bcm63268_pinctrl_reg reg; ++ uint32_t mask; ++}; ++ ++#define BCM63268_PIN(a, b, basemode) \ ++ { \ ++ .number = a, \ ++ .name = b, \ ++ .drv_data = (void *)(basemode) \ ++ } ++ ++static const struct pinctrl_pin_desc bcm63268_pins[] = { ++ PINCTRL_PIN(0, "gpio0"), ++ PINCTRL_PIN(1, "gpio1"), ++ BCM63268_PIN(2, "gpio2", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(3, "gpio3", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(4, "gpio4", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(5, "gpio5", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(6, "gpio6", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(7, "gpio7", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(8, "gpio8", BCM63268_BASEMODE_DECTPD), ++ BCM63268_PIN(9, "gpio9", BCM63268_BASEMODE_DECTPD), ++ BCM63268_PIN(10, "gpio10", BCM63268_BASEMODE_VDSL_PHY_0), ++ BCM63268_PIN(11, "gpio11", BCM63268_BASEMODE_VDSL_PHY_0), ++ BCM63268_PIN(12, "gpio12", BCM63268_BASEMODE_VDSL_PHY_1), ++ BCM63268_PIN(13, "gpio13", BCM63268_BASEMODE_VDSL_PHY_1), ++ PINCTRL_PIN(14, "gpio14"), ++ PINCTRL_PIN(15, "gpio15"), ++ PINCTRL_PIN(16, "gpio16"), ++ PINCTRL_PIN(17, "gpio17"), ++ PINCTRL_PIN(18, "gpio18"), ++ PINCTRL_PIN(19, "gpio19"), ++ PINCTRL_PIN(20, "gpio20"), ++ PINCTRL_PIN(21, "gpio21"), ++ PINCTRL_PIN(22, "gpio22"), ++ PINCTRL_PIN(23, "gpio23"), ++ BCM63268_PIN(24, "gpio24", ++ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_2), ++ BCM63268_PIN(25, "gpio25", ++ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_2), ++ BCM63268_PIN(26, "gpio26", ++ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_3), ++ BCM63268_PIN(27, "gpio27", ++ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_3), ++ BCM63268_PIN(28, "gpio28", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(29, "gpio29", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(30, "gpio30", BCM63268_BASEMODE_NAND), ++ BCM63268_PIN(31, "gpio31", BCM63268_BASEMODE_NAND), ++ PINCTRL_PIN(32, "gpio32"), ++ PINCTRL_PIN(33, "gpio33"), ++ PINCTRL_PIN(34, "gpio34"), ++ PINCTRL_PIN(35, "gpio35"), ++ PINCTRL_PIN(36, "gpio36"), ++ PINCTRL_PIN(37, "gpio37"), ++ PINCTRL_PIN(38, "gpio38"), ++ PINCTRL_PIN(39, "gpio39"), ++ PINCTRL_PIN(40, "gpio40"), ++ PINCTRL_PIN(41, "gpio41"), ++ PINCTRL_PIN(42, "gpio42"), ++ PINCTRL_PIN(43, "gpio43"), ++ PINCTRL_PIN(44, "gpio44"), ++ PINCTRL_PIN(45, "gpio45"), ++ PINCTRL_PIN(46, "gpio46"), ++ PINCTRL_PIN(47, "gpio47"), ++ PINCTRL_PIN(48, "gpio48"), ++ PINCTRL_PIN(49, "gpio49"), ++ PINCTRL_PIN(50, "gpio50"), ++ PINCTRL_PIN(51, "gpio51"), ++}; ++ ++static unsigned gpio0_pins[] = { 0 }; ++static unsigned gpio1_pins[] = { 1 }; ++static unsigned gpio2_pins[] = { 2 }; ++static unsigned gpio3_pins[] = { 3 }; ++static unsigned gpio4_pins[] = { 4 }; ++static unsigned gpio5_pins[] = { 5 }; ++static unsigned gpio6_pins[] = { 6 }; ++static unsigned gpio7_pins[] = { 7 }; ++static unsigned gpio8_pins[] = { 8 }; ++static unsigned gpio9_pins[] = { 9 }; ++static unsigned gpio10_pins[] = { 10 }; ++static unsigned gpio11_pins[] = { 11 }; ++static unsigned gpio12_pins[] = { 12 }; ++static unsigned gpio13_pins[] = { 13 }; ++static unsigned gpio14_pins[] = { 14 }; ++static unsigned gpio15_pins[] = { 15 }; ++static unsigned gpio16_pins[] = { 16 }; ++static unsigned gpio17_pins[] = { 17 }; ++static unsigned gpio18_pins[] = { 18 }; ++static unsigned gpio19_pins[] = { 19 }; ++static unsigned gpio20_pins[] = { 20 }; ++static unsigned gpio21_pins[] = { 21 }; ++static unsigned gpio22_pins[] = { 22 }; ++static unsigned gpio23_pins[] = { 23 }; ++static unsigned gpio24_pins[] = { 24 }; ++static unsigned gpio25_pins[] = { 25 }; ++static unsigned gpio26_pins[] = { 26 }; ++static unsigned gpio27_pins[] = { 27 }; ++static unsigned gpio28_pins[] = { 28 }; ++static unsigned gpio29_pins[] = { 29 }; ++static unsigned gpio30_pins[] = { 30 }; ++static unsigned gpio31_pins[] = { 31 }; ++static unsigned gpio32_pins[] = { 32 }; ++static unsigned gpio33_pins[] = { 33 }; ++static unsigned gpio34_pins[] = { 34 }; ++static unsigned gpio35_pins[] = { 35 }; ++static unsigned gpio36_pins[] = { 36 }; ++static unsigned gpio37_pins[] = { 37 }; ++static unsigned gpio38_pins[] = { 38 }; ++static unsigned gpio39_pins[] = { 39 }; ++static unsigned gpio40_pins[] = { 40 }; ++static unsigned gpio41_pins[] = { 41 }; ++static unsigned gpio42_pins[] = { 42 }; ++static unsigned gpio43_pins[] = { 43 }; ++static unsigned gpio44_pins[] = { 44 }; ++static unsigned gpio45_pins[] = { 45 }; ++static unsigned gpio46_pins[] = { 46 }; ++static unsigned gpio47_pins[] = { 47 }; ++static unsigned gpio48_pins[] = { 48 }; ++static unsigned gpio49_pins[] = { 49 }; ++static unsigned gpio50_pins[] = { 50 }; ++static unsigned gpio51_pins[] = { 51 }; ++ ++static unsigned nand_grp_pins[] = { ++ 2, 3, 4, 5, 6, 7, 24, ++ 25, 26, 27, 28, 29, 30, 31, ++}; ++ ++static unsigned dectpd_grp_pins[] = { 8, 9 }; ++static unsigned vdsl_phy0_grp_pins[] = { 10, 11 }; ++static unsigned vdsl_phy1_grp_pins[] = { 12, 13 }; ++static unsigned vdsl_phy2_grp_pins[] = { 24, 25 }; ++static unsigned vdsl_phy3_grp_pins[] = { 26, 27 }; ++ ++#define BCM63268_GROUP(n) \ ++ { \ ++ .name = #n, \ ++ .pins = n##_pins, \ ++ .num_pins = ARRAY_SIZE(n##_pins), \ ++ } ++ ++static struct bcm63268_pingroup bcm63268_groups[] = { ++ BCM63268_GROUP(gpio0), ++ BCM63268_GROUP(gpio1), ++ BCM63268_GROUP(gpio2), ++ BCM63268_GROUP(gpio3), ++ BCM63268_GROUP(gpio4), ++ BCM63268_GROUP(gpio5), ++ BCM63268_GROUP(gpio6), ++ BCM63268_GROUP(gpio7), ++ BCM63268_GROUP(gpio8), ++ BCM63268_GROUP(gpio9), ++ BCM63268_GROUP(gpio10), ++ BCM63268_GROUP(gpio11), ++ BCM63268_GROUP(gpio12), ++ BCM63268_GROUP(gpio13), ++ BCM63268_GROUP(gpio14), ++ BCM63268_GROUP(gpio15), ++ BCM63268_GROUP(gpio16), ++ BCM63268_GROUP(gpio17), ++ BCM63268_GROUP(gpio18), ++ BCM63268_GROUP(gpio19), ++ BCM63268_GROUP(gpio20), ++ BCM63268_GROUP(gpio21), ++ BCM63268_GROUP(gpio22), ++ BCM63268_GROUP(gpio23), ++ BCM63268_GROUP(gpio24), ++ BCM63268_GROUP(gpio25), ++ BCM63268_GROUP(gpio26), ++ BCM63268_GROUP(gpio27), ++ BCM63268_GROUP(gpio28), ++ BCM63268_GROUP(gpio29), ++ BCM63268_GROUP(gpio30), ++ BCM63268_GROUP(gpio31), ++ BCM63268_GROUP(gpio32), ++ BCM63268_GROUP(gpio33), ++ BCM63268_GROUP(gpio34), ++ BCM63268_GROUP(gpio35), ++ BCM63268_GROUP(gpio36), ++ BCM63268_GROUP(gpio37), ++ BCM63268_GROUP(gpio38), ++ BCM63268_GROUP(gpio39), ++ BCM63268_GROUP(gpio40), ++ BCM63268_GROUP(gpio41), ++ BCM63268_GROUP(gpio42), ++ BCM63268_GROUP(gpio43), ++ BCM63268_GROUP(gpio44), ++ BCM63268_GROUP(gpio45), ++ BCM63268_GROUP(gpio46), ++ BCM63268_GROUP(gpio47), ++ BCM63268_GROUP(gpio48), ++ BCM63268_GROUP(gpio49), ++ BCM63268_GROUP(gpio50), ++ BCM63268_GROUP(gpio51), ++ ++ /* multi pin groups */ ++ BCM63268_GROUP(nand_grp), ++ BCM63268_GROUP(dectpd_grp), ++ BCM63268_GROUP(vdsl_phy0_grp), ++ BCM63268_GROUP(vdsl_phy1_grp), ++ BCM63268_GROUP(vdsl_phy2_grp), ++ BCM63268_GROUP(vdsl_phy3_grp), ++}; ++ ++static const char * const led_groups[] = { ++ "gpio0", ++ "gpio1", ++ "gpio2", ++ "gpio3", ++ "gpio4", ++ "gpio5", ++ "gpio6", ++ "gpio7", ++ "gpio8", ++ "gpio9", ++ "gpio10", ++ "gpio11", ++ "gpio12", ++ "gpio13", ++ "gpio14", ++ "gpio15", ++ "gpio16", ++ "gpio17", ++ "gpio18", ++ "gpio19", ++ "gpio20", ++ "gpio21", ++ "gpio22", ++ "gpio23", ++}; ++ ++static const char * const serial_led_clk_groups[] = { ++ "gpio0", ++}; ++ ++static const char * const serial_led_data_groups[] = { ++ "gpio1", ++}; ++ ++static const char * const hsspi_cs4_groups[] = { ++ "gpio16", ++}; ++ ++static const char * const hsspi_cs5_groups[] = { ++ "gpio17", ++}; ++ ++static const char * const hsspi_cs6_groups[] = { ++ "gpio8", ++}; ++ ++static const char * const hsspi_cs7_groups[] = { ++ "gpio9", ++}; ++ ++static const char * const uart1_scts_groups[] = { ++ "gpio10", ++ "gpio24", ++}; ++ ++static const char * const uart1_srts_groups[] = { ++ "gpio11", ++ "gpio25", ++}; ++ ++static const char * const uart1_sdin_groups[] = { ++ "gpio12", ++ "gpio26", ++}; ++ ++static const char * const uart1_sdout_groups[] = { ++ "gpio13", ++ "gpio27", ++}; ++ ++static const char * const ntr_pulse_in_groups[] = { ++ "gpio14", ++ "gpio28", ++}; ++ ++static const char * const dsl_ntr_pulse_out_groups[] = { ++ "gpio15", ++ "gpio29", ++}; ++ ++static const char * const adsl_spi_miso_groups[] = { ++ "gpio18", ++}; ++ ++static const char * const adsl_spi_mosi_groups[] = { ++ "gpio19", ++}; ++ ++static const char * const vreg_clk_groups[] = { ++ "gpio22", ++}; ++ ++static const char * const pcie_clkreq_b_groups[] = { ++ "gpio23", ++}; ++ ++static const char * const switch_led_clk_groups[] = { ++ "gpio30", ++}; ++ ++static const char * const switch_led_data_groups[] = { ++ "gpio31", ++}; ++ ++static const char * const wifi_groups[] = { ++ "gpio32", ++ "gpio33", ++ "gpio34", ++ "gpio35", ++ "gpio36", ++ "gpio37", ++ "gpio38", ++ "gpio39", ++ "gpio40", ++ "gpio41", ++ "gpio42", ++ "gpio43", ++ "gpio44", ++ "gpio45", ++ "gpio46", ++ "gpio47", ++ "gpio48", ++ "gpio49", ++ "gpio50", ++ "gpio51", ++}; ++ ++static const char * const nand_groups[] = { ++ "nand_grp", ++}; ++ ++static const char * const dectpd_groups[] = { ++ "dectpd_grp", ++}; ++ ++static const char * const vdsl_phy_override_0_groups[] = { ++ "vdsl_phy_override_0_grp", ++}; ++ ++static const char * const vdsl_phy_override_1_groups[] = { ++ "vdsl_phy_override_1_grp", ++}; ++ ++static const char * const vdsl_phy_override_2_groups[] = { ++ "vdsl_phy_override_2_grp", ++}; ++ ++static const char * const vdsl_phy_override_3_groups[] = { ++ "vdsl_phy_override_3_grp", ++}; ++ ++#define BCM63268_LED_FUN(n) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .reg = BCM63268_LEDCTRL, \ ++ } ++ ++#define BCM63268_MODE_FUN(n) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .reg = BCM63268_MODE, \ ++ } ++ ++#define BCM63268_CTRL_FUN(n) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .reg = BCM63268_CTRL, \ ++ } ++ ++#define BCM63268_BASEMODE_FUN(n, val) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .reg = BCM63268_BASEMODE, \ ++ .mask = val, \ ++ } ++ ++static const struct bcm63268_function bcm63268_funcs[] = { ++ BCM63268_LED_FUN(led), ++ BCM63268_MODE_FUN(serial_led_clk), ++ BCM63268_MODE_FUN(serial_led_data), ++ BCM63268_MODE_FUN(hsspi_cs6), ++ BCM63268_MODE_FUN(hsspi_cs7), ++ BCM63268_MODE_FUN(uart1_scts), ++ BCM63268_MODE_FUN(uart1_srts), ++ BCM63268_MODE_FUN(uart1_sdin), ++ BCM63268_MODE_FUN(uart1_sdout), ++ BCM63268_MODE_FUN(ntr_pulse_in), ++ BCM63268_MODE_FUN(dsl_ntr_pulse_out), ++ BCM63268_MODE_FUN(hsspi_cs4), ++ BCM63268_MODE_FUN(hsspi_cs5), ++ BCM63268_MODE_FUN(adsl_spi_miso), ++ BCM63268_MODE_FUN(adsl_spi_mosi), ++ BCM63268_MODE_FUN(vreg_clk), ++ BCM63268_MODE_FUN(pcie_clkreq_b), ++ BCM63268_MODE_FUN(switch_led_clk), ++ BCM63268_MODE_FUN(switch_led_data), ++ BCM63268_CTRL_FUN(wifi), ++ BCM63268_BASEMODE_FUN(nand, BCM63268_BASEMODE_NAND), ++ BCM63268_BASEMODE_FUN(dectpd, BCM63268_BASEMODE_DECTPD), ++ BCM63268_BASEMODE_FUN(vdsl_phy_override_0, ++ BCM63268_BASEMODE_VDSL_PHY_0), ++ BCM63268_BASEMODE_FUN(vdsl_phy_override_1, ++ BCM63268_BASEMODE_VDSL_PHY_1), ++ BCM63268_BASEMODE_FUN(vdsl_phy_override_2, ++ BCM63268_BASEMODE_VDSL_PHY_2), ++ BCM63268_BASEMODE_FUN(vdsl_phy_override_3, ++ BCM63268_BASEMODE_VDSL_PHY_3), ++}; ++ ++static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm63268_groups); ++} ++ ++static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev, ++ unsigned group) ++{ ++ return bcm63268_groups[group].name; ++} ++ ++static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, ++ unsigned group, ++ const unsigned **pins, ++ unsigned *num_pins) ++{ ++ *pins = bcm63268_groups[group].pins; ++ *num_pins = bcm63268_groups[group].num_pins; ++ ++ return 0; ++} ++ ++static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm63268_funcs); ++} ++ ++static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev, ++ unsigned selector) ++{ ++ return bcm63268_funcs[selector].name; ++} ++ ++static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev, ++ unsigned selector, ++ const char * const **groups, ++ unsigned * const num_groups) ++{ ++ *groups = bcm63268_funcs[selector].groups; ++ *num_groups = bcm63268_funcs[selector].num_groups; ++ ++ return 0; ++} ++ ++static void bcm63268_set_gpio(struct bcm63xx_pinctrl *pc, unsigned pin) ++{ ++ const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin]; ++ unsigned int basemode = (unsigned long) desc->drv_data; ++ unsigned int mask = BIT(bcm63xx_bank_pin(pin)); ++ ++ if (basemode) ++ regmap_update_bits(pc->regs, BCM63268_BASEMODE_REG, basemode, ++ 0); ++ ++ if (pin < BCM63XX_BANK_GPIOS) { ++ /* base mode: 0 => gpio, 1 => mux function */ ++ regmap_update_bits(pc->regs, BCM63268_MODE_REG, mask, 0); ++ ++ /* pins 0-23 might be muxed to led */ ++ if (pin < BCM63268_NUM_LEDS) ++ regmap_update_bits(pc->regs, BCM63268_LED_REG, mask, ++ 0); ++ } else if (pin < BCM63268_NUM_GPIOS) { ++ /* ctrl reg: 0 => wifi function, 1 => gpio */ ++ regmap_update_bits(pc->regs, BCM63268_CTRL_REG, mask, mask); ++ } ++} ++ ++static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev, ++ unsigned selector, unsigned group) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ const struct bcm63268_pingroup *pg = &bcm63268_groups[group]; ++ const struct bcm63268_function *f = &bcm63268_funcs[selector]; ++ unsigned i; ++ unsigned int reg; ++ unsigned int val, mask; ++ ++ for (i = 0; i < pg->num_pins; i++) ++ bcm63268_set_gpio(pc, pg->pins[i]); ++ ++ switch (f->reg) { ++ case BCM63268_LEDCTRL: ++ reg = BCM63268_LED_REG; ++ mask = BIT(pg->pins[0]); ++ val = BIT(pg->pins[0]); ++ break; ++ case BCM63268_MODE: ++ reg = BCM63268_MODE_REG; ++ mask = BIT(pg->pins[0]); ++ val = BIT(pg->pins[0]); ++ break; ++ case BCM63268_CTRL: ++ reg = BCM63268_CTRL_REG; ++ mask = BIT(pg->pins[0]); ++ val = 0; ++ break; ++ case BCM63268_BASEMODE: ++ reg = BCM63268_BASEMODE_REG; ++ mask = f->mask; ++ val = f->mask; ++ break; ++ default: ++ WARN_ON(1); ++ return -EINVAL; ++ } ++ ++ regmap_update_bits(pc->regs, reg, mask, val); ++ ++ return 0; ++} ++ ++static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev, ++ struct pinctrl_gpio_range *range, ++ unsigned offset) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ ++ /* disable all functions using this pin */ ++ bcm63268_set_gpio(pc, offset); ++ ++ return 0; ++} ++ ++static struct pinctrl_ops bcm63268_pctl_ops = { ++ .dt_free_map = pinctrl_utils_free_map, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .get_group_name = bcm63268_pinctrl_get_group_name, ++ .get_group_pins = bcm63268_pinctrl_get_group_pins, ++ .get_groups_count = bcm63268_pinctrl_get_group_count, ++}; ++ ++static struct pinmux_ops bcm63268_pmx_ops = { ++ .get_function_groups = bcm63268_pinctrl_get_groups, ++ .get_function_name = bcm63268_pinctrl_get_func_name, ++ .get_functions_count = bcm63268_pinctrl_get_func_count, ++ .gpio_request_enable = bcm63268_gpio_request_enable, ++ .set_mux = bcm63268_pinctrl_set_mux, ++ .strict = true, ++}; ++ ++static const struct bcm63xx_pinctrl_soc bcm63268_soc = { ++ .ngpios = BCM63268_NUM_GPIOS, ++ .npins = ARRAY_SIZE(bcm63268_pins), ++ .pctl_ops = &bcm63268_pctl_ops, ++ .pins = bcm63268_pins, ++ .pmx_ops = &bcm63268_pmx_ops, ++}; ++ ++static int bcm63268_pinctrl_probe(struct platform_device *pdev) ++{ ++ return bcm63xx_pinctrl_probe(pdev, &bcm63268_soc, NULL); ++} ++ ++static const struct of_device_id bcm63268_pinctrl_match[] = { ++ { .compatible = "brcm,bcm63268-pinctrl", }, ++ { /* sentinel */ } ++}; ++ ++static struct platform_driver bcm63268_pinctrl_driver = { ++ .probe = bcm63268_pinctrl_probe, ++ .driver = { ++ .name = "bcm63268-pinctrl", ++ .of_match_table = bcm63268_pinctrl_match, ++ }, ++}; ++ ++builtin_platform_driver(bcm63268_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/071-v5.13-dt-bindings-add-BCM6318-pincontroller-binding-docume.patch b/target/linux/bmips/patches-5.10/071-v5.13-dt-bindings-add-BCM6318-pincontroller-binding-docume.patch new file mode 100644 index 0000000000..3b490da098 --- /dev/null +++ b/target/linux/bmips/patches-5.10/071-v5.13-dt-bindings-add-BCM6318-pincontroller-binding-docume.patch @@ -0,0 +1,168 @@ +From b2f215141b985d5d39ed16fe7e2089d5aa162302 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:21 +0100 +Subject: [PATCH 20/22] dt-bindings: add BCM6318 pincontroller binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the pincontrol core found in BCM6318 SoCs. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-21-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../pinctrl/brcm,bcm6318-pinctrl.yaml | 143 ++++++++++++++++++ + 1 file changed, 143 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml +@@ -0,0 +1,143 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6318 pin controller ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Bindings for Broadcom's BCM6318 memory-mapped pin controller. ++ ++properties: ++ compatible: ++ const: brcm,bcm6318-pinctrl ++ ++ reg: ++ maxItems: 2 ++ ++patternProperties: ++ '-pins$': ++ type: object ++ $ref: pinmux-node.yaml# ++ ++ properties: ++ function: ++ enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led, ++ ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led, ++ serial_led_data, serial_led_clk, inet_act_led, inet_fail_led, ++ dsl_led, post_fail_led, wlan_wps_led, usb_pwron, ++ usb_device_led, usb_active ] ++ ++ pins: ++ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, ++ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ] ++ ++required: ++ - compatible ++ - reg ++ ++additionalProperties: false ++ ++examples: ++ - | ++ pinctrl@18 { ++ compatible = "brcm,bcm6318-pinctrl"; ++ reg = <0x18 0x10>, <0x54 0x18>; ++ ++ pinctrl_ephy0_spd_led: ephy0_spd_led-pins { ++ function = "ephy0_spd_led"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_ephy1_spd_led: ephy1_spd_led-pins { ++ function = "ephy1_spd_led"; ++ pins = "gpio1"; ++ }; ++ ++ pinctrl_ephy2_spd_led: ephy2_spd_led-pins { ++ function = "ephy2_spd_led"; ++ pins = "gpio2"; ++ }; ++ ++ pinctrl_ephy3_spd_led: ephy3_spd_led-pins { ++ function = "ephy3_spd_led"; ++ pins = "gpio3"; ++ }; ++ ++ pinctrl_ephy0_act_led: ephy0_act_led-pins { ++ function = "ephy0_act_led"; ++ pins = "gpio4"; ++ }; ++ ++ pinctrl_ephy1_act_led: ephy1_act_led-pins { ++ function = "ephy1_act_led"; ++ pins = "gpio5"; ++ }; ++ ++ pinctrl_ephy2_act_led: ephy2_act_led-pins { ++ function = "ephy2_act_led"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_ephy3_act_led: ephy3_act_led-pins { ++ function = "ephy3_act_led"; ++ pins = "gpio7"; ++ }; ++ ++ pinctrl_serial_led: serial_led-pins { ++ pinctrl_serial_led_data: serial_led_data-pins { ++ function = "serial_led_data"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_serial_led_clk: serial_led_clk-pins { ++ function = "serial_led_clk"; ++ pins = "gpio7"; ++ }; ++ }; ++ ++ pinctrl_inet_act_led: inet_act_led-pins { ++ function = "inet_act_led"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_inet_fail_led: inet_fail_led-pins { ++ function = "inet_fail_led"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_dsl_led: dsl_led-pins { ++ function = "dsl_led"; ++ pins = "gpio10"; ++ }; ++ ++ pinctrl_post_fail_led: post_fail_led-pins { ++ function = "post_fail_led"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_wlan_wps_led: wlan_wps_led-pins { ++ function = "wlan_wps_led"; ++ pins = "gpio12"; ++ }; ++ ++ pinctrl_usb_pwron: usb_pwron-pins { ++ function = "usb_pwron"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_usb_device_led: usb_device_led-pins { ++ function = "usb_device_led"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_usb_active: usb_active-pins { ++ function = "usb_active"; ++ pins = "gpio40"; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/072-v5.13-dt-bindings-add-BCM6318-GPIO-sysctl-binding-document.patch b/target/linux/bmips/patches-5.10/072-v5.13-dt-bindings-add-BCM6318-GPIO-sysctl-binding-document.patch new file mode 100644 index 0000000000..1ef13407c8 --- /dev/null +++ b/target/linux/bmips/patches-5.10/072-v5.13-dt-bindings-add-BCM6318-GPIO-sysctl-binding-document.patch @@ -0,0 +1,200 @@ +From b6d46b9454742a25f9d923be072869e40b2ecebb Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:22 +0100 +Subject: [PATCH 21/22] dt-bindings: add BCM6318 GPIO sysctl binding + documentation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding documentation for the GPIO sysctl found in BCM6318 SoCs. + +Signed-off-by: Álvaro Fernández Rojas +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20210324081923.20379-22-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + .../mfd/brcm,bcm6318-gpio-sysctl.yaml | 177 ++++++++++++++++++ + 1 file changed, 177 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml +@@ -0,0 +1,177 @@ ++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM6318 GPIO System Controller Device Tree Bindings ++ ++maintainers: ++ - Álvaro Fernández Rojas ++ - Jonas Gorski ++ ++description: ++ Broadcom BCM6318 SoC GPIO system controller which provides a register map ++ for controlling the GPIO and pins of the SoC. ++ ++properties: ++ "#address-cells": true ++ ++ "#size-cells": true ++ ++ compatible: ++ items: ++ - const: brcm,bcm6318-gpio-sysctl ++ - const: syscon ++ - const: simple-mfd ++ ++ ranges: ++ maxItems: 1 ++ ++ reg: ++ maxItems: 1 ++ ++patternProperties: ++ "^gpio@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../gpio/brcm,bcm6345-gpio.yaml" ++ description: ++ GPIO controller for the SoC GPIOs. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. ++ ++ "^pinctrl@[0-9a-f]+$": ++ # Child node ++ type: object ++ $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml" ++ description: ++ Pin controller for the SoC pins. This child node definition ++ should follow the bindings specified in ++ Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml. ++ ++required: ++ - "#address-cells" ++ - compatible ++ - ranges ++ - reg ++ - "#size-cells" ++ ++additionalProperties: false ++ ++examples: ++ - | ++ syscon@10000080 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "brcm,bcm6318-gpio-sysctl", "syscon", "simple-mfd"; ++ reg = <0x10000080 0x80>; ++ ranges = <0 0x10000080 0x80>; ++ ++ gpio@0 { ++ compatible = "brcm,bcm6318-gpio"; ++ reg-names = "dirout", "dat"; ++ reg = <0x0 0x8>, <0x8 0x8>; ++ ++ gpio-controller; ++ gpio-ranges = <&pinctrl 0 0 50>; ++ #gpio-cells = <2>; ++ }; ++ ++ pinctrl: pinctrl@10 { ++ compatible = "brcm,bcm6318-pinctrl"; ++ reg = <0x18 0x10>, <0x54 0x18>; ++ ++ pinctrl_ephy0_spd_led: ephy0_spd_led-pins { ++ function = "ephy0_spd_led"; ++ pins = "gpio0"; ++ }; ++ ++ pinctrl_ephy1_spd_led: ephy1_spd_led-pins { ++ function = "ephy1_spd_led"; ++ pins = "gpio1"; ++ }; ++ ++ pinctrl_ephy2_spd_led: ephy2_spd_led-pins { ++ function = "ephy2_spd_led"; ++ pins = "gpio2"; ++ }; ++ ++ pinctrl_ephy3_spd_led: ephy3_spd_led-pins { ++ function = "ephy3_spd_led"; ++ pins = "gpio3"; ++ }; ++ ++ pinctrl_ephy0_act_led: ephy0_act_led-pins { ++ function = "ephy0_act_led"; ++ pins = "gpio4"; ++ }; ++ ++ pinctrl_ephy1_act_led: ephy1_act_led-pins { ++ function = "ephy1_act_led"; ++ pins = "gpio5"; ++ }; ++ ++ pinctrl_ephy2_act_led: ephy2_act_led-pins { ++ function = "ephy2_act_led"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_ephy3_act_led: ephy3_act_led-pins { ++ function = "ephy3_act_led"; ++ pins = "gpio7"; ++ }; ++ ++ pinctrl_serial_led: serial_led-pins { ++ pinctrl_serial_led_data: serial_led_data-pins { ++ function = "serial_led_data"; ++ pins = "gpio6"; ++ }; ++ ++ pinctrl_serial_led_clk: serial_led_clk-pins { ++ function = "serial_led_clk"; ++ pins = "gpio7"; ++ }; ++ }; ++ ++ pinctrl_inet_act_led: inet_act_led-pins { ++ function = "inet_act_led"; ++ pins = "gpio8"; ++ }; ++ ++ pinctrl_inet_fail_led: inet_fail_led-pins { ++ function = "inet_fail_led"; ++ pins = "gpio9"; ++ }; ++ ++ pinctrl_dsl_led: dsl_led-pins { ++ function = "dsl_led"; ++ pins = "gpio10"; ++ }; ++ ++ pinctrl_post_fail_led: post_fail_led-pins { ++ function = "post_fail_led"; ++ pins = "gpio11"; ++ }; ++ ++ pinctrl_wlan_wps_led: wlan_wps_led-pins { ++ function = "wlan_wps_led"; ++ pins = "gpio12"; ++ }; ++ ++ pinctrl_usb_pwron: usb_pwron-pins { ++ function = "usb_pwron"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_usb_device_led: usb_device_led-pins { ++ function = "usb_device_led"; ++ pins = "gpio13"; ++ }; ++ ++ pinctrl_usb_active: usb_active-pins { ++ function = "usb_active"; ++ pins = "gpio40"; ++ }; ++ }; ++ }; diff --git a/target/linux/bmips/patches-5.10/073-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch b/target/linux/bmips/patches-5.10/073-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch new file mode 100644 index 0000000000..afd8d9e1fa --- /dev/null +++ b/target/linux/bmips/patches-5.10/073-v5.13-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch @@ -0,0 +1,553 @@ +From d28039fccf948a407de69106465caa465b1dcf32 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 24 Mar 2021 09:19:23 +0100 +Subject: [PATCH 22/22] pinctrl: add a pincontrol driver for BCM6318 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs +to different functions. BCM6318 is similar to BCM6328 with the addition +of a pad register, and the GPIO meaning of the mux register changes +based on the GPIO number. + +Co-developed-by: Jonas Gorski +Signed-off-by: Jonas Gorski +Signed-off-by: Álvaro Fernández Rojas +Link: https://lore.kernel.org/r/20210324081923.20379-23-noltari@gmail.com +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/bcm/Kconfig | 8 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm6318.c | 498 ++++++++++++++++++++++++++ + 3 files changed, 507 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6318.c + +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -36,6 +36,14 @@ config PINCTRL_BCM63XX + select PINCONF + select PINMUX + ++config PINCTRL_BCM6318 ++ bool "Broadcom BCM6318 GPIO driver" ++ depends on (BMIPS_GENERIC || COMPILE_TEST) ++ select PINCTRL_BCM63XX ++ default BMIPS_GENERIC ++ help ++ Say Y here to enable the Broadcom BCM6318 GPIO driver. ++ + config PINCTRL_BCM6328 + bool "Broadcom BCM6328 GPIO driver" + depends on (BMIPS_GENERIC || COMPILE_TEST) +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -4,6 +4,7 @@ + obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o + obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o + obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o ++obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o + obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o + obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o + obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o +--- /dev/null ++++ b/drivers/pinctrl/bcm/pinctrl-bcm6318.c +@@ -0,0 +1,498 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Driver for BCM6318 GPIO unit (pinctrl + GPIO) ++ * ++ * Copyright (C) 2021 Álvaro Fernández Rojas ++ * Copyright (C) 2016 Jonas Gorski ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../pinctrl-utils.h" ++ ++#include "pinctrl-bcm63xx.h" ++ ++#define BCM6318_NUM_GPIOS 50 ++#define BCM6318_NUM_MUX 48 ++ ++#define BCM6318_MODE_REG 0x18 ++#define BCM6318_MUX_REG 0x1c ++#define BCM6328_MUX_MASK GENMASK(1, 0) ++#define BCM6318_PAD_REG 0x54 ++#define BCM6328_PAD_MASK GENMASK(3, 0) ++ ++struct bcm6318_pingroup { ++ const char *name; ++ const unsigned * const pins; ++ const unsigned num_pins; ++}; ++ ++struct bcm6318_function { ++ const char *name; ++ const char * const *groups; ++ const unsigned num_groups; ++ ++ unsigned mode_val:1; ++ unsigned mux_val:2; ++}; ++ ++static const struct pinctrl_pin_desc bcm6318_pins[] = { ++ PINCTRL_PIN(0, "gpio0"), ++ PINCTRL_PIN(1, "gpio1"), ++ PINCTRL_PIN(2, "gpio2"), ++ PINCTRL_PIN(3, "gpio3"), ++ PINCTRL_PIN(4, "gpio4"), ++ PINCTRL_PIN(5, "gpio5"), ++ PINCTRL_PIN(6, "gpio6"), ++ PINCTRL_PIN(7, "gpio7"), ++ PINCTRL_PIN(8, "gpio8"), ++ PINCTRL_PIN(9, "gpio9"), ++ PINCTRL_PIN(10, "gpio10"), ++ PINCTRL_PIN(11, "gpio11"), ++ PINCTRL_PIN(12, "gpio12"), ++ PINCTRL_PIN(13, "gpio13"), ++ PINCTRL_PIN(14, "gpio14"), ++ PINCTRL_PIN(15, "gpio15"), ++ PINCTRL_PIN(16, "gpio16"), ++ PINCTRL_PIN(17, "gpio17"), ++ PINCTRL_PIN(18, "gpio18"), ++ PINCTRL_PIN(19, "gpio19"), ++ PINCTRL_PIN(20, "gpio20"), ++ PINCTRL_PIN(21, "gpio21"), ++ PINCTRL_PIN(22, "gpio22"), ++ PINCTRL_PIN(23, "gpio23"), ++ PINCTRL_PIN(24, "gpio24"), ++ PINCTRL_PIN(25, "gpio25"), ++ PINCTRL_PIN(26, "gpio26"), ++ PINCTRL_PIN(27, "gpio27"), ++ PINCTRL_PIN(28, "gpio28"), ++ PINCTRL_PIN(29, "gpio29"), ++ PINCTRL_PIN(30, "gpio30"), ++ PINCTRL_PIN(31, "gpio31"), ++ PINCTRL_PIN(32, "gpio32"), ++ PINCTRL_PIN(33, "gpio33"), ++ PINCTRL_PIN(34, "gpio34"), ++ PINCTRL_PIN(35, "gpio35"), ++ PINCTRL_PIN(36, "gpio36"), ++ PINCTRL_PIN(37, "gpio37"), ++ PINCTRL_PIN(38, "gpio38"), ++ PINCTRL_PIN(39, "gpio39"), ++ PINCTRL_PIN(40, "gpio40"), ++ PINCTRL_PIN(41, "gpio41"), ++ PINCTRL_PIN(42, "gpio42"), ++ PINCTRL_PIN(43, "gpio43"), ++ PINCTRL_PIN(44, "gpio44"), ++ PINCTRL_PIN(45, "gpio45"), ++ PINCTRL_PIN(46, "gpio46"), ++ PINCTRL_PIN(47, "gpio47"), ++ PINCTRL_PIN(48, "gpio48"), ++ PINCTRL_PIN(49, "gpio49"), ++}; ++ ++static unsigned gpio0_pins[] = { 0 }; ++static unsigned gpio1_pins[] = { 1 }; ++static unsigned gpio2_pins[] = { 2 }; ++static unsigned gpio3_pins[] = { 3 }; ++static unsigned gpio4_pins[] = { 4 }; ++static unsigned gpio5_pins[] = { 5 }; ++static unsigned gpio6_pins[] = { 6 }; ++static unsigned gpio7_pins[] = { 7 }; ++static unsigned gpio8_pins[] = { 8 }; ++static unsigned gpio9_pins[] = { 9 }; ++static unsigned gpio10_pins[] = { 10 }; ++static unsigned gpio11_pins[] = { 11 }; ++static unsigned gpio12_pins[] = { 12 }; ++static unsigned gpio13_pins[] = { 13 }; ++static unsigned gpio14_pins[] = { 14 }; ++static unsigned gpio15_pins[] = { 15 }; ++static unsigned gpio16_pins[] = { 16 }; ++static unsigned gpio17_pins[] = { 17 }; ++static unsigned gpio18_pins[] = { 18 }; ++static unsigned gpio19_pins[] = { 19 }; ++static unsigned gpio20_pins[] = { 20 }; ++static unsigned gpio21_pins[] = { 21 }; ++static unsigned gpio22_pins[] = { 22 }; ++static unsigned gpio23_pins[] = { 23 }; ++static unsigned gpio24_pins[] = { 24 }; ++static unsigned gpio25_pins[] = { 25 }; ++static unsigned gpio26_pins[] = { 26 }; ++static unsigned gpio27_pins[] = { 27 }; ++static unsigned gpio28_pins[] = { 28 }; ++static unsigned gpio29_pins[] = { 29 }; ++static unsigned gpio30_pins[] = { 30 }; ++static unsigned gpio31_pins[] = { 31 }; ++static unsigned gpio32_pins[] = { 32 }; ++static unsigned gpio33_pins[] = { 33 }; ++static unsigned gpio34_pins[] = { 34 }; ++static unsigned gpio35_pins[] = { 35 }; ++static unsigned gpio36_pins[] = { 36 }; ++static unsigned gpio37_pins[] = { 37 }; ++static unsigned gpio38_pins[] = { 38 }; ++static unsigned gpio39_pins[] = { 39 }; ++static unsigned gpio40_pins[] = { 40 }; ++static unsigned gpio41_pins[] = { 41 }; ++static unsigned gpio42_pins[] = { 42 }; ++static unsigned gpio43_pins[] = { 43 }; ++static unsigned gpio44_pins[] = { 44 }; ++static unsigned gpio45_pins[] = { 45 }; ++static unsigned gpio46_pins[] = { 46 }; ++static unsigned gpio47_pins[] = { 47 }; ++static unsigned gpio48_pins[] = { 48 }; ++static unsigned gpio49_pins[] = { 49 }; ++ ++#define BCM6318_GROUP(n) \ ++ { \ ++ .name = #n, \ ++ .pins = n##_pins, \ ++ .num_pins = ARRAY_SIZE(n##_pins), \ ++ } ++ ++static struct bcm6318_pingroup bcm6318_groups[] = { ++ BCM6318_GROUP(gpio0), ++ BCM6318_GROUP(gpio1), ++ BCM6318_GROUP(gpio2), ++ BCM6318_GROUP(gpio3), ++ BCM6318_GROUP(gpio4), ++ BCM6318_GROUP(gpio5), ++ BCM6318_GROUP(gpio6), ++ BCM6318_GROUP(gpio7), ++ BCM6318_GROUP(gpio8), ++ BCM6318_GROUP(gpio9), ++ BCM6318_GROUP(gpio10), ++ BCM6318_GROUP(gpio11), ++ BCM6318_GROUP(gpio12), ++ BCM6318_GROUP(gpio13), ++ BCM6318_GROUP(gpio14), ++ BCM6318_GROUP(gpio15), ++ BCM6318_GROUP(gpio16), ++ BCM6318_GROUP(gpio17), ++ BCM6318_GROUP(gpio18), ++ BCM6318_GROUP(gpio19), ++ BCM6318_GROUP(gpio20), ++ BCM6318_GROUP(gpio21), ++ BCM6318_GROUP(gpio22), ++ BCM6318_GROUP(gpio23), ++ BCM6318_GROUP(gpio24), ++ BCM6318_GROUP(gpio25), ++ BCM6318_GROUP(gpio26), ++ BCM6318_GROUP(gpio27), ++ BCM6318_GROUP(gpio28), ++ BCM6318_GROUP(gpio29), ++ BCM6318_GROUP(gpio30), ++ BCM6318_GROUP(gpio31), ++ BCM6318_GROUP(gpio32), ++ BCM6318_GROUP(gpio33), ++ BCM6318_GROUP(gpio34), ++ BCM6318_GROUP(gpio35), ++ BCM6318_GROUP(gpio36), ++ BCM6318_GROUP(gpio37), ++ BCM6318_GROUP(gpio38), ++ BCM6318_GROUP(gpio39), ++ BCM6318_GROUP(gpio40), ++ BCM6318_GROUP(gpio41), ++ BCM6318_GROUP(gpio42), ++ BCM6318_GROUP(gpio43), ++ BCM6318_GROUP(gpio44), ++ BCM6318_GROUP(gpio45), ++ BCM6318_GROUP(gpio46), ++ BCM6318_GROUP(gpio47), ++ BCM6318_GROUP(gpio48), ++ BCM6318_GROUP(gpio49), ++}; ++ ++/* GPIO_MODE */ ++static const char * const led_groups[] = { ++ "gpio0", ++ "gpio1", ++ "gpio2", ++ "gpio3", ++ "gpio4", ++ "gpio5", ++ "gpio6", ++ "gpio7", ++ "gpio8", ++ "gpio9", ++ "gpio10", ++ "gpio11", ++ "gpio12", ++ "gpio13", ++ "gpio14", ++ "gpio15", ++ "gpio16", ++ "gpio17", ++ "gpio18", ++ "gpio19", ++ "gpio20", ++ "gpio21", ++ "gpio22", ++ "gpio23", ++}; ++ ++/* PINMUX_SEL */ ++static const char * const ephy0_spd_led_groups[] = { ++ "gpio0", ++}; ++ ++static const char * const ephy1_spd_led_groups[] = { ++ "gpio1", ++}; ++ ++static const char * const ephy2_spd_led_groups[] = { ++ "gpio2", ++}; ++ ++static const char * const ephy3_spd_led_groups[] = { ++ "gpio3", ++}; ++ ++static const char * const ephy0_act_led_groups[] = { ++ "gpio4", ++}; ++ ++static const char * const ephy1_act_led_groups[] = { ++ "gpio5", ++}; ++ ++static const char * const ephy2_act_led_groups[] = { ++ "gpio6", ++}; ++ ++static const char * const ephy3_act_led_groups[] = { ++ "gpio7", ++}; ++ ++static const char * const serial_led_data_groups[] = { ++ "gpio6", ++}; ++ ++static const char * const serial_led_clk_groups[] = { ++ "gpio7", ++}; ++ ++static const char * const inet_act_led_groups[] = { ++ "gpio8", ++}; ++ ++static const char * const inet_fail_led_groups[] = { ++ "gpio9", ++}; ++ ++static const char * const dsl_led_groups[] = { ++ "gpio10", ++}; ++ ++static const char * const post_fail_led_groups[] = { ++ "gpio11", ++}; ++ ++static const char * const wlan_wps_led_groups[] = { ++ "gpio12", ++}; ++ ++static const char * const usb_pwron_groups[] = { ++ "gpio13", ++}; ++ ++static const char * const usb_device_led_groups[] = { ++ "gpio13", ++}; ++ ++static const char * const usb_active_groups[] = { ++ "gpio40", ++}; ++ ++#define BCM6318_MODE_FUN(n) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .mode_val = 1, \ ++ } ++ ++#define BCM6318_MUX_FUN(n, mux) \ ++ { \ ++ .name = #n, \ ++ .groups = n##_groups, \ ++ .num_groups = ARRAY_SIZE(n##_groups), \ ++ .mux_val = mux, \ ++ } ++ ++static const struct bcm6318_function bcm6318_funcs[] = { ++ BCM6318_MODE_FUN(led), ++ BCM6318_MUX_FUN(ephy0_spd_led, 1), ++ BCM6318_MUX_FUN(ephy1_spd_led, 1), ++ BCM6318_MUX_FUN(ephy2_spd_led, 1), ++ BCM6318_MUX_FUN(ephy3_spd_led, 1), ++ BCM6318_MUX_FUN(ephy0_act_led, 1), ++ BCM6318_MUX_FUN(ephy1_act_led, 1), ++ BCM6318_MUX_FUN(ephy2_act_led, 1), ++ BCM6318_MUX_FUN(ephy3_act_led, 1), ++ BCM6318_MUX_FUN(serial_led_data, 3), ++ BCM6318_MUX_FUN(serial_led_clk, 3), ++ BCM6318_MUX_FUN(inet_act_led, 1), ++ BCM6318_MUX_FUN(inet_fail_led, 1), ++ BCM6318_MUX_FUN(dsl_led, 1), ++ BCM6318_MUX_FUN(post_fail_led, 1), ++ BCM6318_MUX_FUN(wlan_wps_led, 1), ++ BCM6318_MUX_FUN(usb_pwron, 1), ++ BCM6318_MUX_FUN(usb_device_led, 2), ++ BCM6318_MUX_FUN(usb_active, 2), ++}; ++ ++static inline unsigned int bcm6318_mux_off(unsigned int pin) ++{ ++ return BCM6318_MUX_REG + (pin / 16) * 4; ++} ++ ++static inline unsigned int bcm6318_pad_off(unsigned int pin) ++{ ++ return BCM6318_PAD_REG + (pin / 8) * 4; ++} ++ ++static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm6318_groups); ++} ++ ++static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev, ++ unsigned group) ++{ ++ return bcm6318_groups[group].name; ++} ++ ++static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, ++ unsigned group, const unsigned **pins, ++ unsigned *num_pins) ++{ ++ *pins = bcm6318_groups[group].pins; ++ *num_pins = bcm6318_groups[group].num_pins; ++ ++ return 0; ++} ++ ++static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev) ++{ ++ return ARRAY_SIZE(bcm6318_funcs); ++} ++ ++static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev, ++ unsigned selector) ++{ ++ return bcm6318_funcs[selector].name; ++} ++ ++static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev, ++ unsigned selector, ++ const char * const **groups, ++ unsigned * const num_groups) ++{ ++ *groups = bcm6318_funcs[selector].groups; ++ *num_groups = bcm6318_funcs[selector].num_groups; ++ ++ return 0; ++} ++ ++static inline void bcm6318_rmw_mux(struct bcm63xx_pinctrl *pc, unsigned pin, ++ unsigned int mode, unsigned int mux) ++{ ++ if (pin < BCM63XX_BANK_GPIOS) ++ regmap_update_bits(pc->regs, BCM6318_MODE_REG, BIT(pin), ++ mode ? BIT(pin) : 0); ++ ++ if (pin < BCM6318_NUM_MUX) ++ regmap_update_bits(pc->regs, ++ bcm6318_mux_off(pin), ++ BCM6328_MUX_MASK << ((pin % 16) * 2), ++ mux << ((pin % 16) * 2)); ++} ++ ++static inline void bcm6318_set_pad(struct bcm63xx_pinctrl *pc, unsigned pin, ++ uint8_t val) ++{ ++ regmap_update_bits(pc->regs, bcm6318_pad_off(pin), ++ BCM6328_PAD_MASK << ((pin % 8) * 4), ++ val << ((pin % 8) * 4)); ++} ++ ++static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev, ++ unsigned selector, unsigned group) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ const struct bcm6318_pingroup *pg = &bcm6318_groups[group]; ++ const struct bcm6318_function *f = &bcm6318_funcs[selector]; ++ ++ bcm6318_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val); ++ ++ return 0; ++} ++ ++static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev, ++ struct pinctrl_gpio_range *range, ++ unsigned offset) ++{ ++ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ ++ /* disable all functions using this pin */ ++ if (offset < 13) { ++ /* GPIOs 0-12 use mux 0 as GPIO function */ ++ bcm6318_rmw_mux(pc, offset, 0, 0); ++ } else if (offset < 42) { ++ /* GPIOs 13-41 use mux 3 as GPIO function */ ++ bcm6318_rmw_mux(pc, offset, 0, 3); ++ ++ bcm6318_set_pad(pc, offset, 0); ++ } ++ ++ return 0; ++} ++ ++static struct pinctrl_ops bcm6318_pctl_ops = { ++ .dt_free_map = pinctrl_utils_free_map, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, ++ .get_group_name = bcm6318_pinctrl_get_group_name, ++ .get_group_pins = bcm6318_pinctrl_get_group_pins, ++ .get_groups_count = bcm6318_pinctrl_get_group_count, ++}; ++ ++static struct pinmux_ops bcm6318_pmx_ops = { ++ .get_function_groups = bcm6318_pinctrl_get_groups, ++ .get_function_name = bcm6318_pinctrl_get_func_name, ++ .get_functions_count = bcm6318_pinctrl_get_func_count, ++ .gpio_request_enable = bcm6318_gpio_request_enable, ++ .set_mux = bcm6318_pinctrl_set_mux, ++ .strict = true, ++}; ++ ++static const struct bcm63xx_pinctrl_soc bcm6318_soc = { ++ .ngpios = BCM6318_NUM_GPIOS, ++ .npins = ARRAY_SIZE(bcm6318_pins), ++ .pctl_ops = &bcm6318_pctl_ops, ++ .pins = bcm6318_pins, ++ .pmx_ops = &bcm6318_pmx_ops, ++}; ++ ++static int bcm6318_pinctrl_probe(struct platform_device *pdev) ++{ ++ return bcm63xx_pinctrl_probe(pdev, &bcm6318_soc, NULL); ++} ++ ++static const struct of_device_id bcm6318_pinctrl_match[] = { ++ { .compatible = "brcm,bcm6318-pinctrl", }, ++ { /* sentinel */ } ++}; ++ ++static struct platform_driver bcm6318_pinctrl_driver = { ++ .probe = bcm6318_pinctrl_probe, ++ .driver = { ++ .name = "bcm6318-pinctrl", ++ .of_match_table = bcm6318_pinctrl_match, ++ }, ++}; ++ ++builtin_platform_driver(bcm6318_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/400-Documentation-add-BCM6328-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/400-Documentation-add-BCM6328-pincontroller-binding-docu.patch deleted file mode 100644 index 4ad97ad1e0..0000000000 --- a/target/linux/bmips/patches-5.10/400-Documentation-add-BCM6328-pincontroller-binding-docu.patch +++ /dev/null @@ -1,182 +0,0 @@ -From 3b6d70e7bae0dbba02435c53f878a042d6d4bd4d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Wed, 27 Jul 2016 11:33:56 +0200 -Subject: [PATCH 01/12] Documentation: add BCM6328 pincontroller binding - documentation -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add binding documentation for the pincontrol core found in BCM6328 SoCs. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - .../pinctrl/brcm,bcm6328-pinctrl.yaml | 161 ++++++++++++++++++ - 1 file changed, 161 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml -@@ -0,0 +1,161 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Broadcom BCM6328 pin controller -+ -+maintainers: -+ - Álvaro Fernández Rojas -+ - Jonas Gorski -+ -+description: |+ -+ The pin controller node should be the child of a syscon node. -+ -+ Refer to the the bindings described in -+ Documentation/devicetree/bindings/mfd/syscon.yaml -+ -+properties: -+ compatible: -+ const: brcm,bcm6328-pinctrl -+ -+ gpio-controller: true -+ -+ '#gpio-cells': -+ description: -+ Specifies the pin number and flags, as defined in -+ include/dt-bindings/gpio/gpio.h -+ const: 2 -+ -+ interrupts-extended: -+ description: -+ One interrupt per each of the 4 GPIO ports supported by the controller, -+ sorted by port number ascending order. -+ minItems: 4 -+ maxItems: 4 -+ -+patternProperties: -+ '^.*$': -+ if: -+ type: object -+ then: -+ properties: -+ function: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq, -+ led, ephy0_act_led, ephy1_act_led, ephy2_act_led, -+ ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ] -+ -+ pins: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19, -+ gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1, -+ usb_port1 ] -+ -+required: -+ - compatible -+ - gpio-controller -+ - '#gpio-cells' -+ -+additionalProperties: false -+ -+examples: -+ - | -+ gpio@10000080 { -+ compatible = "syscon", "simple-mfd"; -+ reg = <0x10000080 0x80>; -+ -+ pinctrl: pinctrl { -+ compatible = "brcm,bcm6328-pinctrl"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ interrupts-extended = <&ext_intc 3 0>, -+ <&ext_intc 2 0>, -+ <&ext_intc 1 0>, -+ <&ext_intc 0 0>; -+ interrupt-names = "gpio12", -+ "gpio15", -+ "gpio23", -+ "gpio24"; -+ -+ pinctrl_serial_led: serial_led { -+ pinctrl_serial_led_data: serial_led_data { -+ function = "serial_led_data"; -+ pins = "gpio6"; -+ }; -+ -+ pinctrl_serial_led_clk: serial_led_clk { -+ function = "serial_led_clk"; -+ pins = "gpio7"; -+ }; -+ }; -+ -+ pinctrl_inet_act_led: inet_act_led { -+ function = "inet_act_led"; -+ pins = "gpio11"; -+ }; -+ -+ pinctrl_pcie_clkreq: pcie_clkreq { -+ function = "pcie_clkreq"; -+ pins = "gpio16"; -+ }; -+ -+ pinctrl_ephy0_spd_led: ephy0_spd_led { -+ function = "led"; -+ pins = "gpio17"; -+ }; -+ -+ pinctrl_ephy1_spd_led: ephy1_spd_led { -+ function = "led"; -+ pins = "gpio18"; -+ }; -+ -+ pinctrl_ephy2_spd_led: ephy2_spd_led { -+ function = "led"; -+ pins = "gpio19"; -+ }; -+ -+ pinctrl_ephy3_spd_led: ephy3_spd_led { -+ function = "led"; -+ pins = "gpio20"; -+ }; -+ -+ pinctrl_ephy0_act_led: ephy0_act_led { -+ function = "ephy0_act_led"; -+ pins = "gpio25"; -+ }; -+ -+ pinctrl_ephy1_act_led: ephy1_act_led { -+ function = "ephy1_act_led"; -+ pins = "gpio26"; -+ }; -+ -+ pinctrl_ephy2_act_led: ephy2_act_led { -+ function = "ephy2_act_led"; -+ pins = "gpio27"; -+ }; -+ -+ pinctrl_ephy3_act_led: ephy3_act_led { -+ function = "ephy3_act_led"; -+ pins = "gpio28"; -+ }; -+ -+ pinctrl_hsspi_cs1: hsspi_cs1 { -+ function = "hsspi_cs1"; -+ pins = "hsspi_cs1"; -+ }; -+ -+ pinctrl_usb_port1_device: usb_port1_device { -+ function = "usb_device_port"; -+ pins = "usb_port1"; -+ }; -+ -+ pinctrl_usb_port1_host: usb_port1_host { -+ function = "usb_host_port"; -+ pins = "usb_port1"; -+ }; -+ }; -+ }; diff --git a/target/linux/bmips/patches-5.10/401-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch b/target/linux/bmips/patches-5.10/401-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch deleted file mode 100644 index 0e223f2fca..0000000000 --- a/target/linux/bmips/patches-5.10/401-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch +++ /dev/null @@ -1,636 +0,0 @@ -From 3373a507212e6394921781766e9cd0dc155c62ba Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Fri, 24 Jun 2016 22:12:50 +0200 -Subject: [PATCH 02/12] pinctrl: add a pincontrol driver for BCM6328 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add a pincontrol driver for BCM6328. BCM628 supports muxing 32 pins as -GPIOs, as LEDs for the integrated LED controller, or various other -functions. Its pincontrol mux registers also control other aspects, like -switching the second USB port between host and device mode. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm/Kconfig | 11 + - drivers/pinctrl/bcm/Makefile | 1 + - drivers/pinctrl/bcm/pinctrl-bcm6328.c | 581 ++++++++++++++++++++++++++ - 3 files changed, 593 insertions(+) - create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6328.c - ---- a/drivers/pinctrl/bcm/Kconfig -+++ b/drivers/pinctrl/bcm/Kconfig -@@ -29,6 +29,17 @@ config PINCTRL_BCM2835 - help - Say Y here to enable the Broadcom BCM2835 GPIO driver. - -+config PINCTRL_BCM6328 -+ bool "Broadcom BCM6328 GPIO driver" -+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) -+ select PINMUX -+ select PINCONF -+ select GENERIC_PINCONF -+ select MFD_SYSCON -+ default BMIPS_GENERIC -+ help -+ Say Y here to enable the Broadcom BCM6328 GPIO driver. -+ - config PINCTRL_IPROC_GPIO - bool "Broadcom iProc GPIO (with PINCONF) driver" - depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) ---- a/drivers/pinctrl/bcm/Makefile -+++ b/drivers/pinctrl/bcm/Makefile -@@ -3,6 +3,7 @@ - - obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o - obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o -+obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o - obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o - obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o - obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o ---- /dev/null -+++ b/drivers/pinctrl/bcm/pinctrl-bcm6328.c -@@ -0,0 +1,581 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Driver for BCM6328 GPIO unit (pinctrl + GPIO) -+ * -+ * Copyright (C) 2021 Álvaro Fernández Rojas -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#define MODULE_NAME "bcm6328-pinctrl" -+#define BCM6328_NUM_GPIOS 32 -+ -+#define BANK_SIZE sizeof(uint32_t) -+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) -+ -+#define BCM6328_DIROUT_REG 0x04 -+#define BCM6328_DATA_REG 0x0c -+#define BCM6328_MODE_REG 0x18 -+#define BCM6328_MUX_HI_REG 0x1c -+#define BCM6328_MUX_LO_REG 0x20 -+#define BCM6328_MUX_OTHER_REG 0x24 -+ -+struct bcm6328_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm6328_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ -+ unsigned mode_val:1; -+ unsigned mux_val:2; -+}; -+ -+struct bcm6328_pinctrl { -+ struct device *dev; -+ struct regmap *regs; -+ -+ struct pinctrl_dev *pctl_dev; -+ struct gpio_chip gpio_chip; -+ struct pinctrl_desc pctl_desc; -+ struct pinctrl_gpio_range gpio_range; -+}; -+ -+static const struct pinctrl_pin_desc bcm6328_pins[] = { -+ PINCTRL_PIN(0, "gpio0"), -+ PINCTRL_PIN(1, "gpio1"), -+ PINCTRL_PIN(2, "gpio2"), -+ PINCTRL_PIN(3, "gpio3"), -+ PINCTRL_PIN(4, "gpio4"), -+ PINCTRL_PIN(5, "gpio5"), -+ PINCTRL_PIN(6, "gpio6"), -+ PINCTRL_PIN(7, "gpio7"), -+ PINCTRL_PIN(8, "gpio8"), -+ PINCTRL_PIN(9, "gpio9"), -+ PINCTRL_PIN(10, "gpio10"), -+ PINCTRL_PIN(11, "gpio11"), -+ PINCTRL_PIN(12, "gpio12"), -+ PINCTRL_PIN(13, "gpio13"), -+ PINCTRL_PIN(14, "gpio14"), -+ PINCTRL_PIN(15, "gpio15"), -+ PINCTRL_PIN(16, "gpio16"), -+ PINCTRL_PIN(17, "gpio17"), -+ PINCTRL_PIN(18, "gpio18"), -+ PINCTRL_PIN(19, "gpio19"), -+ PINCTRL_PIN(20, "gpio20"), -+ PINCTRL_PIN(21, "gpio21"), -+ PINCTRL_PIN(22, "gpio22"), -+ PINCTRL_PIN(23, "gpio23"), -+ PINCTRL_PIN(24, "gpio24"), -+ PINCTRL_PIN(25, "gpio25"), -+ PINCTRL_PIN(26, "gpio26"), -+ PINCTRL_PIN(27, "gpio27"), -+ PINCTRL_PIN(28, "gpio28"), -+ PINCTRL_PIN(29, "gpio29"), -+ PINCTRL_PIN(30, "gpio30"), -+ PINCTRL_PIN(31, "gpio31"), -+ -+ /* -+ * No idea where they really are; so let's put them according -+ * to their mux offsets. -+ */ -+ PINCTRL_PIN(36, "hsspi_cs1"), -+ PINCTRL_PIN(38, "usb_p2"), -+}; -+ -+static unsigned gpio0_pins[] = { 0 }; -+static unsigned gpio1_pins[] = { 1 }; -+static unsigned gpio2_pins[] = { 2 }; -+static unsigned gpio3_pins[] = { 3 }; -+static unsigned gpio4_pins[] = { 4 }; -+static unsigned gpio5_pins[] = { 5 }; -+static unsigned gpio6_pins[] = { 6 }; -+static unsigned gpio7_pins[] = { 7 }; -+static unsigned gpio8_pins[] = { 8 }; -+static unsigned gpio9_pins[] = { 9 }; -+static unsigned gpio10_pins[] = { 10 }; -+static unsigned gpio11_pins[] = { 11 }; -+static unsigned gpio12_pins[] = { 12 }; -+static unsigned gpio13_pins[] = { 13 }; -+static unsigned gpio14_pins[] = { 14 }; -+static unsigned gpio15_pins[] = { 15 }; -+static unsigned gpio16_pins[] = { 16 }; -+static unsigned gpio17_pins[] = { 17 }; -+static unsigned gpio18_pins[] = { 18 }; -+static unsigned gpio19_pins[] = { 19 }; -+static unsigned gpio20_pins[] = { 20 }; -+static unsigned gpio21_pins[] = { 21 }; -+static unsigned gpio22_pins[] = { 22 }; -+static unsigned gpio23_pins[] = { 23 }; -+static unsigned gpio24_pins[] = { 24 }; -+static unsigned gpio25_pins[] = { 25 }; -+static unsigned gpio26_pins[] = { 26 }; -+static unsigned gpio27_pins[] = { 27 }; -+static unsigned gpio28_pins[] = { 28 }; -+static unsigned gpio29_pins[] = { 29 }; -+static unsigned gpio30_pins[] = { 30 }; -+static unsigned gpio31_pins[] = { 31 }; -+ -+static unsigned hsspi_cs1_pins[] = { 36 }; -+static unsigned usb_port1_pins[] = { 38 }; -+ -+#define BCM6328_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } -+ -+static struct bcm6328_pingroup bcm6328_groups[] = { -+ BCM6328_GROUP(gpio0), -+ BCM6328_GROUP(gpio1), -+ BCM6328_GROUP(gpio2), -+ BCM6328_GROUP(gpio3), -+ BCM6328_GROUP(gpio4), -+ BCM6328_GROUP(gpio5), -+ BCM6328_GROUP(gpio6), -+ BCM6328_GROUP(gpio7), -+ BCM6328_GROUP(gpio8), -+ BCM6328_GROUP(gpio9), -+ BCM6328_GROUP(gpio10), -+ BCM6328_GROUP(gpio11), -+ BCM6328_GROUP(gpio12), -+ BCM6328_GROUP(gpio13), -+ BCM6328_GROUP(gpio14), -+ BCM6328_GROUP(gpio15), -+ BCM6328_GROUP(gpio16), -+ BCM6328_GROUP(gpio17), -+ BCM6328_GROUP(gpio18), -+ BCM6328_GROUP(gpio19), -+ BCM6328_GROUP(gpio20), -+ BCM6328_GROUP(gpio21), -+ BCM6328_GROUP(gpio22), -+ BCM6328_GROUP(gpio23), -+ BCM6328_GROUP(gpio24), -+ BCM6328_GROUP(gpio25), -+ BCM6328_GROUP(gpio26), -+ BCM6328_GROUP(gpio27), -+ BCM6328_GROUP(gpio28), -+ BCM6328_GROUP(gpio29), -+ BCM6328_GROUP(gpio30), -+ BCM6328_GROUP(gpio31), -+ -+ BCM6328_GROUP(hsspi_cs1), -+ BCM6328_GROUP(usb_port1), -+}; -+ -+/* GPIO_MODE */ -+static const char * const led_groups[] = { -+ "gpio0", -+ "gpio1", -+ "gpio2", -+ "gpio3", -+ "gpio4", -+ "gpio5", -+ "gpio6", -+ "gpio7", -+ "gpio8", -+ "gpio9", -+ "gpio10", -+ "gpio11", -+ "gpio12", -+ "gpio13", -+ "gpio14", -+ "gpio15", -+ "gpio16", -+ "gpio17", -+ "gpio18", -+ "gpio19", -+ "gpio20", -+ "gpio21", -+ "gpio22", -+ "gpio23", -+}; -+ -+/* PINMUX_SEL */ -+static const char * const serial_led_data_groups[] = { -+ "gpio6", -+}; -+ -+static const char * const serial_led_clk_groups[] = { -+ "gpio7", -+}; -+ -+static const char * const inet_act_led_groups[] = { -+ "gpio11", -+}; -+ -+static const char * const pcie_clkreq_groups[] = { -+ "gpio16", -+}; -+ -+static const char * const ephy0_act_led_groups[] = { -+ "gpio25", -+}; -+ -+static const char * const ephy1_act_led_groups[] = { -+ "gpio26", -+}; -+ -+static const char * const ephy2_act_led_groups[] = { -+ "gpio27", -+}; -+ -+static const char * const ephy3_act_led_groups[] = { -+ "gpio28", -+}; -+ -+static const char * const hsspi_cs1_groups[] = { -+ "hsspi_cs1" -+}; -+ -+static const char * const usb_host_port_groups[] = { -+ "usb_port1", -+}; -+ -+static const char * const usb_device_port_groups[] = { -+ "usb_port1", -+}; -+ -+#define BCM6328_MODE_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .mode_val = 1, \ -+ } -+ -+#define BCM6328_MUX_FUN(n, mux) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .mux_val = mux, \ -+ } -+ -+static const struct bcm6328_function bcm6328_funcs[] = { -+ BCM6328_MODE_FUN(led), -+ BCM6328_MUX_FUN(serial_led_data, 2), -+ BCM6328_MUX_FUN(serial_led_clk, 2), -+ BCM6328_MUX_FUN(inet_act_led, 1), -+ BCM6328_MUX_FUN(pcie_clkreq, 2), -+ BCM6328_MUX_FUN(ephy0_act_led, 1), -+ BCM6328_MUX_FUN(ephy1_act_led, 1), -+ BCM6328_MUX_FUN(ephy2_act_led, 1), -+ BCM6328_MUX_FUN(ephy3_act_led, 1), -+ BCM6328_MUX_FUN(hsspi_cs1, 2), -+ BCM6328_MUX_FUN(usb_host_port, 1), -+ BCM6328_MUX_FUN(usb_device_port, 2), -+}; -+ -+static inline unsigned int bcm6328_bank_pin(unsigned int pin) -+{ -+ return pin % PINS_PER_BANK; -+} -+ -+static inline unsigned int bcm6318_mux_off(unsigned int pin) -+{ -+ static const unsigned int bcm6328_mux[] = { -+ BCM6328_MUX_LO_REG, -+ BCM6328_MUX_HI_REG, -+ BCM6328_MUX_OTHER_REG -+ }; -+ -+ return bcm6328_mux[pin / 16]; -+} -+ -+static inline unsigned int bcm6328_reg_off(unsigned int reg, unsigned int pin) -+{ -+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; -+} -+ -+static int bcm6328_gpio_direction_input(struct gpio_chip *chip, -+ unsigned int pin) -+{ -+ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm6328_reg_off(BCM6328_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6328_bank_pin(pin); -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an input GPIO -+ */ -+ ret = pinctrl_gpio_direction_input(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); -+ -+ return 0; -+} -+ -+static int bcm6328_gpio_direction_output(struct gpio_chip *chip, -+ unsigned int pin, int value) -+{ -+ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6328_reg_off(BCM6328_DATA_REG, pin); -+ unsigned int dirout = bcm6328_reg_off(BCM6328_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6328_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an output GPIO -+ */ -+ ret = pinctrl_gpio_direction_output(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+ -+ return 0; -+} -+ -+static int bcm6328_gpio_get(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6328_reg_off(BCM6328_DATA_REG, pin); -+ unsigned int bank_pin = bcm6328_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, data, &val); -+ -+ return !!(val & BIT(bank_pin)); -+} -+ -+static int bcm6328_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm6328_reg_off(BCM6328_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6328_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, dirout, &val); -+ -+ if (val & BIT(bank_pin)) -+ return GPIO_LINE_DIRECTION_OUT; -+ -+ return GPIO_LINE_DIRECTION_IN; -+} -+ -+static void bcm6328_gpio_set(struct gpio_chip *chip, unsigned int pin, -+ int value) -+{ -+ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6328_reg_off(BCM6328_DATA_REG, pin); -+ unsigned int bank_pin = bcm6328_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+} -+ -+static int bcm6328_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ char irq_name[7]; -+ -+ sprintf(irq_name, "gpio%d", gpio); -+ -+ return of_irq_get_byname(chip->of_node, irq_name); -+} -+ -+static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6328_groups); -+} -+ -+static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6328_groups[group].name; -+} -+ -+static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6328_groups[group].pins; -+ *num_pins = bcm6328_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6328_funcs); -+} -+ -+static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6328_funcs[selector].name; -+} -+ -+static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6328_funcs[selector].groups; -+ *num_groups = bcm6328_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pc, unsigned pin, -+ unsigned int mode, unsigned int mux) -+{ -+ if (pin < BCM6328_NUM_GPIOS) -+ regmap_update_bits(pc->regs, BCM6328_MODE_REG, BIT(pin), -+ mode ? BIT(pin) : 0); -+ -+ regmap_update_bits(pc->regs, bcm6318_mux_off(pin), -+ 3UL << ((pin % 16) * 2), -+ mux << ((pin % 16) * 2)); -+} -+ -+static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6328_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6328_pingroup *pg = &bcm6328_groups[group]; -+ const struct bcm6328_function *f = &bcm6328_funcs[selector]; -+ -+ bcm6328_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val); -+ -+ return 0; -+} -+ -+static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6328_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ -+ /* disable all functions using this pin */ -+ bcm6328_rmw_mux(pc, offset, 0, 0); -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm6328_pctl_ops = { -+ .get_groups_count = bcm6328_pinctrl_get_group_count, -+ .get_group_name = bcm6328_pinctrl_get_group_name, -+ .get_group_pins = bcm6328_pinctrl_get_group_pins, -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+}; -+ -+static struct pinmux_ops bcm6328_pmx_ops = { -+ .get_functions_count = bcm6328_pinctrl_get_func_count, -+ .get_function_name = bcm6328_pinctrl_get_func_name, -+ .get_function_groups = bcm6328_pinctrl_get_groups, -+ .set_mux = bcm6328_pinctrl_set_mux, -+ .gpio_request_enable = bcm6328_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6328_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct bcm6328_pinctrl *pc; -+ int err; -+ -+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); -+ if (!pc) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, pc); -+ pc->dev = dev; -+ -+ pc->regs = syscon_node_to_regmap(dev->parent->of_node); -+ if (IS_ERR(pc->regs)) -+ return PTR_ERR(pc->regs); -+ -+ pc->gpio_chip.label = MODULE_NAME; -+ pc->gpio_chip.owner = THIS_MODULE; -+ pc->gpio_chip.request = gpiochip_generic_request; -+ pc->gpio_chip.free = gpiochip_generic_free; -+ pc->gpio_chip.direction_input = bcm6328_gpio_direction_input; -+ pc->gpio_chip.direction_output = bcm6328_gpio_direction_output; -+ pc->gpio_chip.get_direction = bcm6328_gpio_get_direction; -+ pc->gpio_chip.get = bcm6328_gpio_get; -+ pc->gpio_chip.set = bcm6328_gpio_set; -+ pc->gpio_chip.set_config = gpiochip_generic_config; -+ pc->gpio_chip.base = -1; -+ pc->gpio_chip.ngpio = BCM6328_NUM_GPIOS; -+ pc->gpio_chip.can_sleep = false; -+ pc->gpio_chip.parent = dev; -+ pc->gpio_chip.of_node = np; -+ -+ if (of_get_property(np, "interrupt-names", NULL)) -+ pc->gpio_chip.to_irq = bcm6328_gpio_to_irq; -+ -+ err = gpiochip_add_data(&pc->gpio_chip, pc); -+ if (err) { -+ dev_err(dev, "could not add GPIO chip\n"); -+ return err; -+ } -+ -+ pc->pctl_desc.name = MODULE_NAME, -+ pc->pctl_desc.pins = bcm6328_pins, -+ pc->pctl_desc.npins = ARRAY_SIZE(bcm6328_pins), -+ pc->pctl_desc.pctlops = &bcm6328_pctl_ops, -+ pc->pctl_desc.pmxops = &bcm6328_pmx_ops, -+ pc->pctl_desc.owner = THIS_MODULE, -+ -+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); -+ if (IS_ERR(pc->pctl_dev)) { -+ gpiochip_remove(&pc->gpio_chip); -+ return PTR_ERR(pc->pctl_dev); -+ } -+ -+ pc->gpio_range.name = MODULE_NAME; -+ pc->gpio_range.npins = BCM6328_NUM_GPIOS; -+ pc->gpio_range.base = pc->gpio_chip.base; -+ pc->gpio_range.gc = &pc->gpio_chip; -+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); -+ -+ dev_info(dev, "registered\n"); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6328_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6328-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6328_pinctrl_driver = { -+ .probe = bcm6328_pinctrl_probe, -+ .driver = { -+ .name = MODULE_NAME, -+ .of_match_table = bcm6328_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6328_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/402-Documentation-add-BCM6358-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/402-Documentation-add-BCM6358-pincontroller-binding-docu.patch deleted file mode 100644 index e4c6343e3f..0000000000 --- a/target/linux/bmips/patches-5.10/402-Documentation-add-BCM6358-pincontroller-binding-docu.patch +++ /dev/null @@ -1,152 +0,0 @@ -From 9fbcbe08479bcb3609952b66627e2d612173229a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Wed, 27 Jul 2016 11:36:00 +0200 -Subject: [PATCH 03/12] Documentation: add BCM6358 pincontroller binding - documentation -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add binding documentation for the pincontrol core found in BCM6358 SoCs. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - .../pinctrl/brcm,bcm6358-pinctrl.yaml | 131 ++++++++++++++++++ - 1 file changed, 131 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml -@@ -0,0 +1,131 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Broadcom BCM6358 pin controller -+ -+maintainers: -+ - Álvaro Fernández Rojas -+ - Jonas Gorski -+ -+description: |+ -+ The pin controller node should be the child of a syscon node. -+ -+ Refer to the the bindings described in -+ Documentation/devicetree/bindings/mfd/syscon.yaml -+ -+properties: -+ compatible: -+ const: brcm,bcm6358-pinctrl -+ -+ gpio-controller: true -+ -+ '#gpio-cells': -+ description: -+ Specifies the pin number and flags, as defined in -+ include/dt-bindings/gpio/gpio.h -+ const: 2 -+ -+ interrupts-extended: -+ description: -+ One interrupt per each of the 4 GPIO ports supported by the controller, -+ sorted by port number ascending order. -+ minItems: 6 -+ maxItems: 6 -+ -+patternProperties: -+ '^.*$': -+ if: -+ type: object -+ then: -+ properties: -+ function: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia, -+ pwm_syn_clk, sys_irq ] -+ -+ pins: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp, -+ led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] -+ -+required: -+ - compatible -+ - gpio-controller -+ - '#gpio-cells' -+ -+additionalProperties: false -+ -+examples: -+ - | -+ gpio@fffe0080 { -+ compatible = "syscon", "simple-mfd"; -+ reg = <0xfffe0080 0x80>; -+ -+ pinctrl: pinctrl { -+ compatible = "brcm,bcm6358-pinctrl"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ interrupts-extended = <&ext_intc1 0 0>, -+ <&ext_intc1 1 0>, -+ <&ext_intc0 0 0>, -+ <&ext_intc0 1 0>, -+ <&ext_intc0 2 0>, -+ <&ext_intc0 3 0>; -+ interrupt-names = "gpio32", -+ "gpio33", -+ "gpio34", -+ "gpio35", -+ "gpio36", -+ "gpio37"; -+ -+ pinctrl_ebi_cs: ebi_cs { -+ function = "ebi_cs"; -+ groups = "ebi_cs_grp"; -+ }; -+ -+ pinctrl_uart1: uart1 { -+ function = "uart1"; -+ groups = "uart1_grp"; -+ }; -+ -+ pinctrl_serial_led: serial_led { -+ function = "serial_led"; -+ groups = "serial_led_grp"; -+ }; -+ -+ pinctrl_legacy_led: legacy_led { -+ function = "legacy_led"; -+ groups = "legacy_led_grp"; -+ }; -+ -+ pinctrl_led: led { -+ function = "led"; -+ groups = "led_grp"; -+ }; -+ -+ pinctrl_spi_cs_23: spi_cs { -+ function = "spi_cs"; -+ groups = "spi_cs_grp"; -+ }; -+ -+ pinctrl_utopia: utopia { -+ function = "utopia"; -+ groups = "utopia_grp"; -+ }; -+ -+ pinctrl_pwm_syn_clk: pwm_syn_clk { -+ function = "pwm_syn_clk"; -+ groups = "pwm_syn_clk_grp"; -+ }; -+ -+ pinctrl_sys_irq: sys_irq { -+ function = "sys_irq"; -+ groups = "sys_irq_grp"; -+ }; -+ }; -+ }; diff --git a/target/linux/bmips/patches-5.10/403-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch b/target/linux/bmips/patches-5.10/403-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch deleted file mode 100644 index fb8681d904..0000000000 --- a/target/linux/bmips/patches-5.10/403-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch +++ /dev/null @@ -1,582 +0,0 @@ -From b0e1ebc79a6d7f84f71a758f5a504c8cf954e2e0 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Fri, 24 Jun 2016 22:16:01 +0200 -Subject: [PATCH 04/12] pinctrl: add a pincontrol driver for BCM6358 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different -functions onto the GPIO pins. It does not support configuring individual -pins but only whole groups. These groups may overlap, and still require -the directions to be set correctly in the GPIO register. In addition the -functions register controls other, not directly mux related functions. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm/Kconfig | 11 + - drivers/pinctrl/bcm/Makefile | 1 + - drivers/pinctrl/bcm/pinctrl-bcm6358.c | 526 ++++++++++++++++++++++++++ - 3 files changed, 538 insertions(+) - create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6358.c - ---- a/drivers/pinctrl/bcm/Kconfig -+++ b/drivers/pinctrl/bcm/Kconfig -@@ -40,6 +40,17 @@ config PINCTRL_BCM6328 - help - Say Y here to enable the Broadcom BCM6328 GPIO driver. - -+config PINCTRL_BCM6358 -+ bool "Broadcom BCM6358 GPIO driver" -+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) -+ select PINMUX -+ select PINCONF -+ select GENERIC_PINCONF -+ select MFD_SYSCON -+ default BMIPS_GENERIC -+ help -+ Say Y here to enable the Broadcom BCM6358 GPIO driver. -+ - config PINCTRL_IPROC_GPIO - bool "Broadcom iProc GPIO (with PINCONF) driver" - depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) ---- a/drivers/pinctrl/bcm/Makefile -+++ b/drivers/pinctrl/bcm/Makefile -@@ -4,6 +4,7 @@ - obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o - obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o -+obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o - obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o - obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o - obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o ---- /dev/null -+++ b/drivers/pinctrl/bcm/pinctrl-bcm6358.c -@@ -0,0 +1,526 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Driver for BCM6358 GPIO unit (pinctrl + GPIO) -+ * -+ * Copyright (C) 2021 Álvaro Fernández Rojas -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#define MODULE_NAME "bcm6358-pinctrl" -+#define BCM6358_NUM_GPIOS 40 -+ -+#define BANK_SIZE sizeof(uint32_t) -+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) -+ -+#define BCM6358_DIROUT_REG 0x04 -+#define BCM6358_DATA_REG 0x0c -+#define BCM6358_MODE_REG 0x18 -+ -+#define BCM6358_MODE_MUX_NONE 0 -+#define BCM6358_MODE_MUX_EBI_CS BIT(5) -+#define BCM6358_MODE_MUX_UART1 BIT(6) -+#define BCM6358_MODE_MUX_SPI_CS BIT(7) -+#define BCM6358_MODE_MUX_ASYNC_MODEM BIT(8) -+#define BCM6358_MODE_MUX_LEGACY_LED BIT(9) -+#define BCM6358_MODE_MUX_SERIAL_LED BIT(10) -+#define BCM6358_MODE_MUX_LED BIT(11) -+#define BCM6358_MODE_MUX_UTOPIA BIT(12) -+#define BCM6358_MODE_MUX_CLKRST BIT(13) -+#define BCM6358_MODE_MUX_PWM_SYN_CLK BIT(14) -+#define BCM6358_MODE_MUX_SYS_IRQ BIT(15) -+ -+struct bcm6358_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+ -+ const uint16_t mode_val; -+ -+ /* non-GPIO function muxes require the gpio direction to be set */ -+ const uint16_t direction; -+}; -+ -+struct bcm6358_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+}; -+ -+struct bcm6358_pinctrl { -+ struct device *dev; -+ struct regmap *regs; -+ struct regmap_field *overlays; -+ -+ struct pinctrl_dev *pctl_dev; -+ struct gpio_chip gpio_chip; -+ struct pinctrl_desc pctl_desc; -+ struct pinctrl_gpio_range gpio_range; -+}; -+ -+#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3) \ -+ { \ -+ .number = a, \ -+ .name = b, \ -+ .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 | \ -+ BCM6358_MODE_MUX_##bit2 | \ -+ BCM6358_MODE_MUX_##bit3), \ -+ } -+ -+static const struct pinctrl_pin_desc bcm6358_pins[] = { -+ BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE), -+ BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE), -+ BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE), -+ BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE), -+ PINCTRL_PIN(4, "gpio4"), -+ BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE), -+ BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE), -+ BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE), -+ BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE), -+ BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE), -+ BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE), -+ BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE), -+ BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA), -+ BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA), -+ BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA), -+ BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA), -+ PINCTRL_PIN(16, "gpio16"), -+ PINCTRL_PIN(17, "gpio17"), -+ PINCTRL_PIN(18, "gpio18"), -+ PINCTRL_PIN(19, "gpio19"), -+ PINCTRL_PIN(20, "gpio20"), -+ PINCTRL_PIN(21, "gpio21"), -+ BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE), -+ BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE), -+ BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS), -+ BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS), -+ BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE), -+ BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE), -+ PINCTRL_PIN(34, "gpio34"), -+ PINCTRL_PIN(35, "gpio35"), -+ PINCTRL_PIN(36, "gpio36"), -+ PINCTRL_PIN(37, "gpio37"), -+ PINCTRL_PIN(38, "gpio38"), -+ PINCTRL_PIN(39, "gpio39"), -+}; -+ -+static unsigned ebi_cs_grp_pins[] = { 30, 31 }; -+ -+static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 }; -+ -+static unsigned spi_cs_grp_pins[] = { 32, 33 }; -+ -+static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 }; -+ -+static unsigned serial_led_grp_pins[] = { 6, 7 }; -+ -+static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 }; -+ -+static unsigned led_grp_pins[] = { 0, 1, 2, 3 }; -+ -+static unsigned utopia_grp_pins[] = { -+ 12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, -+}; -+ -+static unsigned pwm_syn_clk_grp_pins[] = { 8 }; -+ -+static unsigned sys_irq_grp_pins[] = { 5 }; -+ -+#define BCM6358_GPIO_MUX_GROUP(n, bit, dir) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ .mode_val = BCM6358_MODE_MUX_##bit, \ -+ .direction = dir, \ -+ } -+ -+static const struct bcm6358_pingroup bcm6358_groups[] = { -+ BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3), -+ BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2), -+ BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6), -+ BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6), -+ BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f), -+ BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3), -+ BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf), -+ BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f), -+ BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1), -+ BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1), -+}; -+ -+static const char * const ebi_cs_groups[] = { -+ "ebi_cs_grp" -+}; -+ -+static const char * const uart1_groups[] = { -+ "uart1_grp" -+}; -+ -+static const char * const spi_cs_2_3_groups[] = { -+ "spi_cs_2_3_grp" -+}; -+ -+static const char * const async_modem_groups[] = { -+ "async_modem_grp" -+}; -+ -+static const char * const legacy_led_groups[] = { -+ "legacy_led_grp", -+}; -+ -+static const char * const serial_led_groups[] = { -+ "serial_led_grp", -+}; -+ -+static const char * const led_groups[] = { -+ "led_grp", -+}; -+ -+static const char * const clkrst_groups[] = { -+ "clkrst_grp", -+}; -+ -+static const char * const pwm_syn_clk_groups[] = { -+ "pwm_syn_clk_grp", -+}; -+ -+static const char * const sys_irq_groups[] = { -+ "sys_irq_grp", -+}; -+ -+#define BCM6358_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ } -+ -+static const struct bcm6358_function bcm6358_funcs[] = { -+ BCM6358_FUN(ebi_cs), -+ BCM6358_FUN(uart1), -+ BCM6358_FUN(spi_cs_2_3), -+ BCM6358_FUN(async_modem), -+ BCM6358_FUN(legacy_led), -+ BCM6358_FUN(serial_led), -+ BCM6358_FUN(led), -+ BCM6358_FUN(clkrst), -+ BCM6358_FUN(pwm_syn_clk), -+ BCM6358_FUN(sys_irq), -+}; -+ -+static inline unsigned int bcm6358_bank_pin(unsigned int pin) -+{ -+ return pin % PINS_PER_BANK; -+} -+ -+static inline unsigned int bcm6358_reg_off(unsigned int reg, unsigned int pin) -+{ -+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; -+} -+ -+static int bcm6358_gpio_direction_input(struct gpio_chip *chip, -+ unsigned int pin) -+{ -+ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm6358_reg_off(BCM6358_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6358_bank_pin(pin); -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an input GPIO -+ */ -+ ret = pinctrl_gpio_direction_input(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); -+ -+ return 0; -+} -+ -+static int bcm6358_gpio_direction_output(struct gpio_chip *chip, -+ unsigned int pin, int value) -+{ -+ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6358_reg_off(BCM6358_DATA_REG, pin); -+ unsigned int dirout = bcm6358_reg_off(BCM6358_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6358_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an output GPIO -+ */ -+ ret = pinctrl_gpio_direction_output(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+ -+ return 0; -+} -+ -+static int bcm6358_gpio_get(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6358_reg_off(BCM6358_DATA_REG, pin); -+ unsigned int bank_pin = bcm6358_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, data, &val); -+ -+ return !!(val & BIT(bank_pin)); -+} -+ -+static int bcm6358_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm6358_reg_off(BCM6358_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6358_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, dirout, &val); -+ -+ if (val & BIT(bank_pin)) -+ return GPIO_LINE_DIRECTION_OUT; -+ -+ return GPIO_LINE_DIRECTION_IN; -+} -+ -+static void bcm6358_gpio_set(struct gpio_chip *chip, unsigned int pin, -+ int value) -+{ -+ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6358_reg_off(BCM6358_DATA_REG, pin); -+ unsigned int bank_pin = bcm6358_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+} -+ -+static int bcm6358_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ char irq_name[7]; -+ -+ sprintf(irq_name, "gpio%d", gpio); -+ -+ return of_irq_get_byname(chip->of_node, irq_name); -+} -+ -+static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6358_groups); -+} -+ -+static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6358_groups[group].name; -+} -+ -+static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6358_groups[group].pins; -+ *num_pins = bcm6358_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6358_funcs); -+} -+ -+static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6358_funcs[selector].name; -+} -+ -+static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6358_funcs[selector].groups; -+ *num_groups = bcm6358_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6358_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6358_pingroup *pg = &bcm6358_groups[group]; -+ unsigned int val = pg->mode_val; -+ unsigned int mask = val; -+ unsigned pin; -+ -+ for (pin = 0; pin < pg->num_pins; pin++) -+ mask |= (unsigned long)bcm6358_pins[pin].drv_data; -+ -+ regmap_field_update_bits(pc->overlays, mask, val); -+ -+ for (pin = 0; pin < pg->num_pins; pin++) { -+ int hw_gpio = bcm6358_pins[pin].number; -+ struct gpio_chip *gc = &pc->gpio_chip; -+ -+ if (pg->direction & BIT(pin)) -+ gc->direction_output(gc, hw_gpio, 0); -+ else -+ gc->direction_input(gc, hw_gpio); -+ } -+ -+ return 0; -+} -+ -+static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6358_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ unsigned int mask; -+ -+ mask = (unsigned long) bcm6358_pins[offset].drv_data; -+ if (!mask) -+ return 0; -+ -+ /* disable all functions using this pin */ -+ return regmap_field_update_bits(pc->overlays, mask, 0); -+} -+ -+static struct pinctrl_ops bcm6358_pctl_ops = { -+ .get_groups_count = bcm6358_pinctrl_get_group_count, -+ .get_group_name = bcm6358_pinctrl_get_group_name, -+ .get_group_pins = bcm6358_pinctrl_get_group_pins, -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+}; -+ -+static struct pinmux_ops bcm6358_pmx_ops = { -+ .get_functions_count = bcm6358_pinctrl_get_func_count, -+ .get_function_name = bcm6358_pinctrl_get_func_name, -+ .get_function_groups = bcm6358_pinctrl_get_groups, -+ .set_mux = bcm6358_pinctrl_set_mux, -+ .gpio_request_enable = bcm6358_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6358_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct reg_field overlays = REG_FIELD(BCM6358_MODE_REG, 0, 15); -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct bcm6358_pinctrl *pc; -+ int err; -+ -+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); -+ if (!pc) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, pc); -+ pc->dev = dev; -+ -+ pc->regs = syscon_node_to_regmap(dev->parent->of_node); -+ if (IS_ERR(pc->regs)) -+ return PTR_ERR(pc->regs); -+ -+ pc->overlays = devm_regmap_field_alloc(&pdev->dev, pc->regs, overlays); -+ if (IS_ERR(pc->overlays)) -+ return PTR_ERR(pc->overlays); -+ -+ /* disable all muxes by default */ -+ regmap_field_write(pc->overlays, 0); -+ -+ pc->gpio_chip.label = MODULE_NAME; -+ pc->gpio_chip.owner = THIS_MODULE; -+ pc->gpio_chip.request = gpiochip_generic_request; -+ pc->gpio_chip.free = gpiochip_generic_free; -+ pc->gpio_chip.direction_input = bcm6358_gpio_direction_input; -+ pc->gpio_chip.direction_output = bcm6358_gpio_direction_output; -+ pc->gpio_chip.get_direction = bcm6358_gpio_get_direction; -+ pc->gpio_chip.get = bcm6358_gpio_get; -+ pc->gpio_chip.set = bcm6358_gpio_set; -+ pc->gpio_chip.set_config = gpiochip_generic_config; -+ pc->gpio_chip.base = -1; -+ pc->gpio_chip.ngpio = BCM6358_NUM_GPIOS; -+ pc->gpio_chip.can_sleep = false; -+ pc->gpio_chip.parent = dev; -+ pc->gpio_chip.of_node = np; -+ -+ if (of_get_property(np, "interrupt-names", NULL)) -+ pc->gpio_chip.to_irq = bcm6358_gpio_to_irq; -+ -+ err = gpiochip_add_data(&pc->gpio_chip, pc); -+ if (err) { -+ dev_err(dev, "could not add GPIO chip\n"); -+ return err; -+ } -+ -+ pc->pctl_desc.name = MODULE_NAME, -+ pc->pctl_desc.pins = bcm6358_pins, -+ pc->pctl_desc.npins = ARRAY_SIZE(bcm6358_pins), -+ pc->pctl_desc.pctlops = &bcm6358_pctl_ops, -+ pc->pctl_desc.pmxops = &bcm6358_pmx_ops, -+ pc->pctl_desc.owner = THIS_MODULE, -+ -+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); -+ if (IS_ERR(pc->pctl_dev)) { -+ gpiochip_remove(&pc->gpio_chip); -+ return PTR_ERR(pc->pctl_dev); -+ } -+ -+ pc->gpio_range.name = MODULE_NAME; -+ pc->gpio_range.npins = BCM6358_NUM_GPIOS; -+ pc->gpio_range.base = pc->gpio_chip.base; -+ pc->gpio_range.gc = &pc->gpio_chip; -+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); -+ -+ dev_info(dev, "registered\n"); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6358_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6358-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6358_pinctrl_driver = { -+ .probe = bcm6358_pinctrl_probe, -+ .driver = { -+ .name = MODULE_NAME, -+ .of_match_table = bcm6358_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6358_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/404-Documentation-add-BCM6362-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/404-Documentation-add-BCM6362-pincontroller-binding-docu.patch deleted file mode 100644 index 18739091aa..0000000000 --- a/target/linux/bmips/patches-5.10/404-Documentation-add-BCM6362-pincontroller-binding-docu.patch +++ /dev/null @@ -1,261 +0,0 @@ -From 1c839f287a008023b3b3ae7d892b4d25e3d224ad Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Wed, 27 Jul 2016 11:36:18 +0200 -Subject: [PATCH 05/12] Documentation: add BCM6362 pincontroller binding - documentation -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add binding documentation for the pincontrol core found in BCM6362 SoCs. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - .../pinctrl/brcm,bcm6362-pinctrl.yaml | 240 ++++++++++++++++++ - 1 file changed, 240 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml -@@ -0,0 +1,240 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Broadcom BCM6362 pin controller -+ -+maintainers: -+ - Álvaro Fernández Rojas -+ - Jonas Gorski -+ -+description: |+ -+ The pin controller node should be the child of a syscon node. -+ -+ Refer to the the bindings described in -+ Documentation/devicetree/bindings/mfd/syscon.yaml -+ -+properties: -+ compatible: -+ const: brcm,bcm6362-pinctrl -+ -+ gpio-controller: true -+ -+ '#gpio-cells': -+ description: -+ Specifies the pin number and flags, as defined in -+ include/dt-bindings/gpio/gpio.h -+ const: 2 -+ -+ interrupts-extended: -+ description: -+ One interrupt per each of the 4 GPIO ports supported by the controller, -+ sorted by port number ascending order. -+ minItems: 4 -+ maxItems: 4 -+ -+patternProperties: -+ '^.*$': -+ if: -+ type: object -+ then: -+ properties: -+ function: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data, -+ robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1, -+ inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts, -+ uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso, -+ adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led, -+ ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1, -+ ext_irq2, ext_irq3, nand ] -+ -+ pins: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, -+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, -+ gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, -+ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] -+ -+required: -+ - compatible -+ - gpio-controller -+ - '#gpio-cells' -+ -+additionalProperties: false -+ -+examples: -+ - | -+ gpio@10000080 { -+ compatible = "syscon", "simple-mfd"; -+ reg = <0x10000080 0x80>; -+ -+ pinctrl: pinctrl { -+ compatible = "brcm,bcm6362-pinctrl"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ interrupts-extended = <&ext_intc 0 0>, -+ <&ext_intc 1 0>, -+ <&ext_intc 2 0>, -+ <&ext_intc 3 0>; -+ interrupt-names = "gpio24", -+ "gpio25", -+ "gpio26", -+ "gpio27"; -+ -+ pinctrl_usb_device_led: usb_device_led { -+ function = "usb_device_led"; -+ pins = "gpio0"; -+ }; -+ -+ pinctrl_sys_irq: sys_irq { -+ function = "sys_irq"; -+ pins = "gpio1"; -+ }; -+ -+ pinctrl_serial_led: serial_led { -+ pinctrl_serial_led_clk: serial_led_clk { -+ function = "serial_led_clk"; -+ pins = "gpio2"; -+ }; -+ -+ pinctrl_serial_led_data: serial_led_data { -+ function = "serial_led_data"; -+ pins = "gpio3"; -+ }; -+ }; -+ -+ pinctrl_robosw_led_data: robosw_led_data { -+ function = "robosw_led_data"; -+ pins = "gpio4"; -+ }; -+ -+ pinctrl_robosw_led_clk: robosw_led_clk { -+ function = "robosw_led_clk"; -+ pins = "gpio5"; -+ }; -+ -+ pinctrl_robosw_led0: robosw_led0 { -+ function = "robosw_led0"; -+ pins = "gpio6"; -+ }; -+ -+ pinctrl_robosw_led1: robosw_led1 { -+ function = "robosw_led1"; -+ pins = "gpio7"; -+ }; -+ -+ pinctrl_inet_led: inet_led { -+ function = "inet_led"; -+ pins = "gpio8"; -+ }; -+ -+ pinctrl_spi_cs2: spi_cs2 { -+ function = "spi_cs2"; -+ pins = "gpio9"; -+ }; -+ -+ pinctrl_spi_cs3: spi_cs3 { -+ function = "spi_cs3"; -+ pins = "gpio10"; -+ }; -+ -+ pinctrl_ntr_pulse: ntr_pulse { -+ function = "ntr_pulse"; -+ pins = "gpio11"; -+ }; -+ -+ pinctrl_uart1_scts: uart1_scts { -+ function = "uart1_scts"; -+ pins = "gpio12"; -+ }; -+ -+ pinctrl_uart1_srts: uart1_srts { -+ function = "uart1_srts"; -+ pins = "gpio13"; -+ }; -+ -+ pinctrl_uart1: uart1 { -+ pinctrl_uart1_sdin: uart1_sdin { -+ function = "uart1_sdin"; -+ pins = "gpio14"; -+ }; -+ -+ pinctrl_uart1_sdout: uart1_sdout { -+ function = "uart1_sdout"; -+ pins = "gpio15"; -+ }; -+ }; -+ -+ pinctrl_adsl_spi: adsl_spi { -+ pinctrl_adsl_spi_miso: adsl_spi_miso { -+ function = "adsl_spi_miso"; -+ pins = "gpio16"; -+ }; -+ -+ pinctrl_adsl_spi_mosi: adsl_spi_mosi { -+ function = "adsl_spi_mosi"; -+ pins = "gpio17"; -+ }; -+ -+ pinctrl_adsl_spi_clk: adsl_spi_clk { -+ function = "adsl_spi_clk"; -+ pins = "gpio18"; -+ }; -+ -+ pinctrl_adsl_spi_cs: adsl_spi_cs { -+ function = "adsl_spi_cs"; -+ pins = "gpio19"; -+ }; -+ }; -+ -+ pinctrl_ephy0_led: ephy0_led { -+ function = "ephy0_led"; -+ pins = "gpio20"; -+ }; -+ -+ pinctrl_ephy1_led: ephy1_led { -+ function = "ephy1_led"; -+ pins = "gpio21"; -+ }; -+ -+ pinctrl_ephy2_led: ephy2_led { -+ function = "ephy2_led"; -+ pins = "gpio22"; -+ }; -+ -+ pinctrl_ephy3_led: ephy3_led { -+ function = "ephy3_led"; -+ pins = "gpio23"; -+ }; -+ -+ pinctrl_ext_irq0: ext_irq0 { -+ function = "ext_irq0"; -+ pins = "gpio24"; -+ }; -+ -+ pinctrl_ext_irq1: ext_irq1 { -+ function = "ext_irq1"; -+ pins = "gpio25"; -+ }; -+ -+ pinctrl_ext_irq2: ext_irq2 { -+ function = "ext_irq2"; -+ pins = "gpio26"; -+ }; -+ -+ pinctrl_ext_irq3: ext_irq3 { -+ function = "ext_irq3"; -+ pins = "gpio27"; -+ }; -+ -+ pinctrl_nand: nand { -+ function = "nand"; -+ group = "nand_grp"; -+ }; -+ }; -+ }; diff --git a/target/linux/bmips/patches-5.10/405-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch b/target/linux/bmips/patches-5.10/405-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch deleted file mode 100644 index bfc6620ace..0000000000 --- a/target/linux/bmips/patches-5.10/405-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch +++ /dev/null @@ -1,849 +0,0 @@ -From 2872fcb5eac02d3a74d696e6350410a9e66281b4 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Fri, 24 Jun 2016 22:17:20 +0200 -Subject: [PATCH 06/12] pinctrl: add a pincontrol driver for BCM6362 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual -GPIO pins to the LED controller, to be available by the integrated -wifi, or other functions. It also supports overlay groups, of which -only NAND is documented. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm/Kconfig | 11 + - drivers/pinctrl/bcm/Makefile | 1 + - drivers/pinctrl/bcm/pinctrl-bcm6362.c | 794 ++++++++++++++++++++++++++ - 3 files changed, 806 insertions(+) - create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6362.c - ---- a/drivers/pinctrl/bcm/Kconfig -+++ b/drivers/pinctrl/bcm/Kconfig -@@ -51,6 +51,17 @@ config PINCTRL_BCM6358 - help - Say Y here to enable the Broadcom BCM6358 GPIO driver. - -+config PINCTRL_BCM6362 -+ bool "Broadcom BCM6362 GPIO driver" -+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) -+ select PINMUX -+ select PINCONF -+ select GENERIC_PINCONF -+ select MFD_SYSCON -+ default BMIPS_GENERIC -+ help -+ Say Y here to enable the Broadcom BCM6362 GPIO driver. -+ - config PINCTRL_IPROC_GPIO - bool "Broadcom iProc GPIO (with PINCONF) driver" - depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) ---- a/drivers/pinctrl/bcm/Makefile -+++ b/drivers/pinctrl/bcm/Makefile -@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinct - obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o -+obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o - obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o - obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o - obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o ---- /dev/null -+++ b/drivers/pinctrl/bcm/pinctrl-bcm6362.c -@@ -0,0 +1,794 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Driver for BCM6362 GPIO unit (pinctrl + GPIO) -+ * -+ * Copyright (C) 2021 Álvaro Fernández Rojas -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#define MODULE_NAME "bcm6362-pinctrl" -+#define BCM6362_NUM_GPIOS 48 -+#define BCM6362_NUM_LEDS 24 -+ -+#define BANK_SIZE sizeof(uint32_t) -+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) -+ -+#define BCM6362_DIROUT_REG 0x04 -+#define BCM6362_DATA_REG 0x0c -+#define BCM6362_LED_REG 0x10 -+#define BCM6362_MODE_REG 0x18 -+#define BCM6362_CTRL_REG 0x1c -+#define BCM6362_BASEMODE_REG 0x38 -+#define BASEMODE_NAND BIT(2) -+ -+enum bcm6362_pinctrl_reg { -+ BCM6362_LEDCTRL, -+ BCM6362_MODE, -+ BCM6362_CTRL, -+ BCM6362_BASEMODE, -+}; -+ -+struct bcm6362_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm6362_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ -+ enum bcm6362_pinctrl_reg reg; -+ uint32_t basemode_mask; -+}; -+ -+struct bcm6362_pinctrl { -+ struct device *dev; -+ struct regmap *regs; -+ -+ struct pinctrl_dev *pctl_dev; -+ struct gpio_chip gpio_chip; -+ struct pinctrl_desc pctl_desc; -+ struct pinctrl_gpio_range gpio_range; -+}; -+ -+#define BCM6362_PIN(a, b, mask) \ -+ { \ -+ .number = a, \ -+ .name = b, \ -+ .drv_data = (void *)(mask), \ -+ } -+ -+static const struct pinctrl_pin_desc bcm6362_pins[] = { -+ PINCTRL_PIN(0, "gpio0"), -+ PINCTRL_PIN(1, "gpio1"), -+ PINCTRL_PIN(2, "gpio2"), -+ PINCTRL_PIN(3, "gpio3"), -+ PINCTRL_PIN(4, "gpio4"), -+ PINCTRL_PIN(5, "gpio5"), -+ PINCTRL_PIN(6, "gpio6"), -+ PINCTRL_PIN(7, "gpio7"), -+ BCM6362_PIN(8, "gpio8", BASEMODE_NAND), -+ PINCTRL_PIN(9, "gpio9"), -+ PINCTRL_PIN(10, "gpio10"), -+ PINCTRL_PIN(11, "gpio11"), -+ BCM6362_PIN(12, "gpio12", BASEMODE_NAND), -+ BCM6362_PIN(13, "gpio13", BASEMODE_NAND), -+ BCM6362_PIN(14, "gpio14", BASEMODE_NAND), -+ BCM6362_PIN(15, "gpio15", BASEMODE_NAND), -+ BCM6362_PIN(16, "gpio16", BASEMODE_NAND), -+ BCM6362_PIN(17, "gpio17", BASEMODE_NAND), -+ BCM6362_PIN(18, "gpio18", BASEMODE_NAND), -+ BCM6362_PIN(19, "gpio19", BASEMODE_NAND), -+ BCM6362_PIN(20, "gpio20", BASEMODE_NAND), -+ BCM6362_PIN(21, "gpio21", BASEMODE_NAND), -+ BCM6362_PIN(22, "gpio22", BASEMODE_NAND), -+ BCM6362_PIN(23, "gpio23", BASEMODE_NAND), -+ PINCTRL_PIN(24, "gpio24"), -+ PINCTRL_PIN(25, "gpio25"), -+ PINCTRL_PIN(26, "gpio26"), -+ BCM6362_PIN(27, "gpio27", BASEMODE_NAND), -+ PINCTRL_PIN(28, "gpio28"), -+ PINCTRL_PIN(29, "gpio29"), -+ PINCTRL_PIN(30, "gpio30"), -+ PINCTRL_PIN(31, "gpio31"), -+ PINCTRL_PIN(32, "gpio32"), -+ PINCTRL_PIN(33, "gpio33"), -+ PINCTRL_PIN(34, "gpio34"), -+ PINCTRL_PIN(35, "gpio35"), -+ PINCTRL_PIN(36, "gpio36"), -+ PINCTRL_PIN(37, "gpio37"), -+ PINCTRL_PIN(38, "gpio38"), -+ PINCTRL_PIN(39, "gpio39"), -+ PINCTRL_PIN(40, "gpio40"), -+ PINCTRL_PIN(41, "gpio41"), -+ PINCTRL_PIN(42, "gpio42"), -+ PINCTRL_PIN(43, "gpio43"), -+ PINCTRL_PIN(44, "gpio44"), -+ PINCTRL_PIN(45, "gpio45"), -+ PINCTRL_PIN(46, "gpio46"), -+ PINCTRL_PIN(47, "gpio47"), -+}; -+ -+static unsigned gpio0_pins[] = { 0 }; -+static unsigned gpio1_pins[] = { 1 }; -+static unsigned gpio2_pins[] = { 2 }; -+static unsigned gpio3_pins[] = { 3 }; -+static unsigned gpio4_pins[] = { 4 }; -+static unsigned gpio5_pins[] = { 5 }; -+static unsigned gpio6_pins[] = { 6 }; -+static unsigned gpio7_pins[] = { 7 }; -+static unsigned gpio8_pins[] = { 8 }; -+static unsigned gpio9_pins[] = { 9 }; -+static unsigned gpio10_pins[] = { 10 }; -+static unsigned gpio11_pins[] = { 11 }; -+static unsigned gpio12_pins[] = { 12 }; -+static unsigned gpio13_pins[] = { 13 }; -+static unsigned gpio14_pins[] = { 14 }; -+static unsigned gpio15_pins[] = { 15 }; -+static unsigned gpio16_pins[] = { 16 }; -+static unsigned gpio17_pins[] = { 17 }; -+static unsigned gpio18_pins[] = { 18 }; -+static unsigned gpio19_pins[] = { 19 }; -+static unsigned gpio20_pins[] = { 20 }; -+static unsigned gpio21_pins[] = { 21 }; -+static unsigned gpio22_pins[] = { 22 }; -+static unsigned gpio23_pins[] = { 23 }; -+static unsigned gpio24_pins[] = { 24 }; -+static unsigned gpio25_pins[] = { 25 }; -+static unsigned gpio26_pins[] = { 26 }; -+static unsigned gpio27_pins[] = { 27 }; -+static unsigned gpio28_pins[] = { 28 }; -+static unsigned gpio29_pins[] = { 29 }; -+static unsigned gpio30_pins[] = { 30 }; -+static unsigned gpio31_pins[] = { 31 }; -+static unsigned gpio32_pins[] = { 32 }; -+static unsigned gpio33_pins[] = { 33 }; -+static unsigned gpio34_pins[] = { 34 }; -+static unsigned gpio35_pins[] = { 35 }; -+static unsigned gpio36_pins[] = { 36 }; -+static unsigned gpio37_pins[] = { 37 }; -+static unsigned gpio38_pins[] = { 38 }; -+static unsigned gpio39_pins[] = { 39 }; -+static unsigned gpio40_pins[] = { 40 }; -+static unsigned gpio41_pins[] = { 41 }; -+static unsigned gpio42_pins[] = { 42 }; -+static unsigned gpio43_pins[] = { 43 }; -+static unsigned gpio44_pins[] = { 44 }; -+static unsigned gpio45_pins[] = { 45 }; -+static unsigned gpio46_pins[] = { 46 }; -+static unsigned gpio47_pins[] = { 47 }; -+ -+static unsigned nand_grp_pins[] = { -+ 8, 12, 13, 14, 15, 16, 17, -+ 18, 19, 20, 21, 22, 23, 27, -+}; -+ -+#define BCM6362_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } -+ -+static struct bcm6362_pingroup bcm6362_groups[] = { -+ BCM6362_GROUP(gpio0), -+ BCM6362_GROUP(gpio1), -+ BCM6362_GROUP(gpio2), -+ BCM6362_GROUP(gpio3), -+ BCM6362_GROUP(gpio4), -+ BCM6362_GROUP(gpio5), -+ BCM6362_GROUP(gpio6), -+ BCM6362_GROUP(gpio7), -+ BCM6362_GROUP(gpio8), -+ BCM6362_GROUP(gpio9), -+ BCM6362_GROUP(gpio10), -+ BCM6362_GROUP(gpio11), -+ BCM6362_GROUP(gpio12), -+ BCM6362_GROUP(gpio13), -+ BCM6362_GROUP(gpio14), -+ BCM6362_GROUP(gpio15), -+ BCM6362_GROUP(gpio16), -+ BCM6362_GROUP(gpio17), -+ BCM6362_GROUP(gpio18), -+ BCM6362_GROUP(gpio19), -+ BCM6362_GROUP(gpio20), -+ BCM6362_GROUP(gpio21), -+ BCM6362_GROUP(gpio22), -+ BCM6362_GROUP(gpio23), -+ BCM6362_GROUP(gpio24), -+ BCM6362_GROUP(gpio25), -+ BCM6362_GROUP(gpio26), -+ BCM6362_GROUP(gpio27), -+ BCM6362_GROUP(gpio28), -+ BCM6362_GROUP(gpio29), -+ BCM6362_GROUP(gpio30), -+ BCM6362_GROUP(gpio31), -+ BCM6362_GROUP(gpio32), -+ BCM6362_GROUP(gpio33), -+ BCM6362_GROUP(gpio34), -+ BCM6362_GROUP(gpio35), -+ BCM6362_GROUP(gpio36), -+ BCM6362_GROUP(gpio37), -+ BCM6362_GROUP(gpio38), -+ BCM6362_GROUP(gpio39), -+ BCM6362_GROUP(gpio40), -+ BCM6362_GROUP(gpio41), -+ BCM6362_GROUP(gpio42), -+ BCM6362_GROUP(gpio43), -+ BCM6362_GROUP(gpio44), -+ BCM6362_GROUP(gpio45), -+ BCM6362_GROUP(gpio46), -+ BCM6362_GROUP(gpio47), -+ BCM6362_GROUP(nand_grp), -+}; -+ -+static const char * const led_groups[] = { -+ "gpio0", -+ "gpio1", -+ "gpio2", -+ "gpio3", -+ "gpio4", -+ "gpio5", -+ "gpio6", -+ "gpio7", -+ "gpio8", -+ "gpio9", -+ "gpio10", -+ "gpio11", -+ "gpio12", -+ "gpio13", -+ "gpio14", -+ "gpio15", -+ "gpio16", -+ "gpio17", -+ "gpio18", -+ "gpio19", -+ "gpio20", -+ "gpio21", -+ "gpio22", -+ "gpio23", -+}; -+ -+static const char * const usb_device_led_groups[] = { -+ "gpio0", -+}; -+ -+static const char * const sys_irq_groups[] = { -+ "gpio1", -+}; -+ -+static const char * const serial_led_clk_groups[] = { -+ "gpio2", -+}; -+ -+static const char * const serial_led_data_groups[] = { -+ "gpio3", -+}; -+ -+static const char * const robosw_led_data_groups[] = { -+ "gpio4", -+}; -+ -+static const char * const robosw_led_clk_groups[] = { -+ "gpio5", -+}; -+ -+static const char * const robosw_led0_groups[] = { -+ "gpio6", -+}; -+ -+static const char * const robosw_led1_groups[] = { -+ "gpio7", -+}; -+ -+static const char * const inet_led_groups[] = { -+ "gpio8", -+}; -+ -+static const char * const spi_cs2_groups[] = { -+ "gpio9", -+}; -+ -+static const char * const spi_cs3_groups[] = { -+ "gpio10", -+}; -+ -+static const char * const ntr_pulse_groups[] = { -+ "gpio11", -+}; -+ -+static const char * const uart1_scts_groups[] = { -+ "gpio12", -+}; -+ -+static const char * const uart1_srts_groups[] = { -+ "gpio13", -+}; -+ -+static const char * const uart1_sdin_groups[] = { -+ "gpio14", -+}; -+ -+static const char * const uart1_sdout_groups[] = { -+ "gpio15", -+}; -+ -+static const char * const adsl_spi_miso_groups[] = { -+ "gpio16", -+}; -+ -+static const char * const adsl_spi_mosi_groups[] = { -+ "gpio17", -+}; -+ -+static const char * const adsl_spi_clk_groups[] = { -+ "gpio18", -+}; -+ -+static const char * const adsl_spi_cs_groups[] = { -+ "gpio19", -+}; -+ -+static const char * const ephy0_led_groups[] = { -+ "gpio20", -+}; -+ -+static const char * const ephy1_led_groups[] = { -+ "gpio21", -+}; -+ -+static const char * const ephy2_led_groups[] = { -+ "gpio22", -+}; -+ -+static const char * const ephy3_led_groups[] = { -+ "gpio23", -+}; -+ -+static const char * const ext_irq0_groups[] = { -+ "gpio24", -+}; -+ -+static const char * const ext_irq1_groups[] = { -+ "gpio25", -+}; -+ -+static const char * const ext_irq2_groups[] = { -+ "gpio26", -+}; -+ -+static const char * const ext_irq3_groups[] = { -+ "gpio27", -+}; -+ -+static const char * const wifi_groups[] = { -+ "gpio32", -+ "gpio33", -+ "gpio34", -+ "gpio35", -+ "gpio36", -+ "gpio37", -+ "gpio38", -+ "gpio39", -+ "gpio40", -+ "gpio41", -+ "gpio42", -+ "gpio43", -+ "gpio44", -+ "gpio45", -+ "gpio46", -+ "gpio47", -+}; -+ -+static const char * const nand_groups[] = { -+ "nand_grp", -+}; -+ -+#define BCM6362_LED_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM6362_LEDCTRL, \ -+ } -+ -+#define BCM6362_MODE_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM6362_MODE, \ -+ } -+ -+#define BCM6362_CTRL_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM6362_CTRL, \ -+ } -+ -+#define BCM6362_BASEMODE_FUN(n, mask) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM6362_BASEMODE, \ -+ .basemode_mask = (mask), \ -+ } -+ -+static const struct bcm6362_function bcm6362_funcs[] = { -+ BCM6362_LED_FUN(led), -+ BCM6362_MODE_FUN(usb_device_led), -+ BCM6362_MODE_FUN(sys_irq), -+ BCM6362_MODE_FUN(serial_led_clk), -+ BCM6362_MODE_FUN(serial_led_data), -+ BCM6362_MODE_FUN(robosw_led_data), -+ BCM6362_MODE_FUN(robosw_led_clk), -+ BCM6362_MODE_FUN(robosw_led0), -+ BCM6362_MODE_FUN(robosw_led1), -+ BCM6362_MODE_FUN(inet_led), -+ BCM6362_MODE_FUN(spi_cs2), -+ BCM6362_MODE_FUN(spi_cs3), -+ BCM6362_MODE_FUN(ntr_pulse), -+ BCM6362_MODE_FUN(uart1_scts), -+ BCM6362_MODE_FUN(uart1_srts), -+ BCM6362_MODE_FUN(uart1_sdin), -+ BCM6362_MODE_FUN(uart1_sdout), -+ BCM6362_MODE_FUN(adsl_spi_miso), -+ BCM6362_MODE_FUN(adsl_spi_mosi), -+ BCM6362_MODE_FUN(adsl_spi_clk), -+ BCM6362_MODE_FUN(adsl_spi_cs), -+ BCM6362_MODE_FUN(ephy0_led), -+ BCM6362_MODE_FUN(ephy1_led), -+ BCM6362_MODE_FUN(ephy2_led), -+ BCM6362_MODE_FUN(ephy3_led), -+ BCM6362_MODE_FUN(ext_irq0), -+ BCM6362_MODE_FUN(ext_irq1), -+ BCM6362_MODE_FUN(ext_irq2), -+ BCM6362_MODE_FUN(ext_irq3), -+ BCM6362_CTRL_FUN(wifi), -+ BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND), -+}; -+ -+static inline unsigned int bcm6362_bank_pin(unsigned int pin) -+{ -+ return pin % PINS_PER_BANK; -+} -+ -+static inline unsigned int bcm6362_reg_off(unsigned int reg, unsigned int pin) -+{ -+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; -+} -+ -+static int bcm6362_gpio_direction_input(struct gpio_chip *chip, -+ unsigned int pin) -+{ -+ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm6362_reg_off(BCM6362_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6362_bank_pin(pin); -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an input GPIO -+ */ -+ ret = pinctrl_gpio_direction_input(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); -+ -+ return 0; -+} -+ -+static int bcm6362_gpio_direction_output(struct gpio_chip *chip, -+ unsigned int pin, int value) -+{ -+ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6362_reg_off(BCM6362_DATA_REG, pin); -+ unsigned int dirout = bcm6362_reg_off(BCM6362_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6362_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an output GPIO -+ */ -+ ret = pinctrl_gpio_direction_output(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+ -+ return 0; -+} -+ -+static int bcm6362_gpio_get(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6362_reg_off(BCM6362_DATA_REG, pin); -+ unsigned int bank_pin = bcm6362_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, data, &val); -+ -+ return !!(val & BIT(bank_pin)); -+} -+ -+static int bcm6362_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm6362_reg_off(BCM6362_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6362_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, dirout, &val); -+ -+ if (val & BIT(bank_pin)) -+ return GPIO_LINE_DIRECTION_OUT; -+ -+ return GPIO_LINE_DIRECTION_IN; -+} -+ -+static void bcm6362_gpio_set(struct gpio_chip *chip, unsigned int pin, -+ int value) -+{ -+ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6362_reg_off(BCM6362_DATA_REG, pin); -+ unsigned int bank_pin = bcm6362_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+} -+ -+static int bcm6362_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ char irq_name[7]; -+ -+ sprintf(irq_name, "gpio%d", gpio); -+ -+ return of_irq_get_byname(chip->of_node, irq_name); -+} -+ -+static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6362_groups); -+} -+ -+static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6362_groups[group].name; -+} -+ -+static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6362_groups[group].pins; -+ *num_pins = bcm6362_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6362_funcs); -+} -+ -+static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6362_funcs[selector].name; -+} -+ -+static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6362_funcs[selector].groups; -+ *num_groups = bcm6362_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static void bcm6362_set_gpio(struct bcm6362_pinctrl *pc, unsigned pin) -+{ -+ const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin]; -+ unsigned int mask = bcm6362_bank_pin(pin); -+ -+ if (desc->drv_data) -+ regmap_update_bits(pc->regs, BCM6362_BASEMODE_REG, -+ (uint32_t) desc->drv_data, 0); -+ -+ if (pin < PINS_PER_BANK) { -+ /* base mode 0 => gpio 1 => mux function */ -+ regmap_update_bits(pc->regs, BCM6362_MODE_REG, mask, 0); -+ -+ /* pins 0-23 might be muxed to led */ -+ if (pin < BCM6362_NUM_LEDS) -+ regmap_update_bits(pc->regs, BCM6362_LED_REG, mask, 0); -+ } else { -+ /* ctrl reg 0 => wifi function 1 => gpio */ -+ regmap_update_bits(pc->regs, BCM6362_CTRL_REG, mask, mask); -+ } -+} -+ -+static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6362_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6362_pingroup *pg = &bcm6362_groups[group]; -+ const struct bcm6362_function *f = &bcm6362_funcs[selector]; -+ unsigned i; -+ unsigned int reg; -+ unsigned int val, mask; -+ -+ for (i = 0; i < pg->num_pins; i++) -+ bcm6362_set_gpio(pc, pg->pins[i]); -+ -+ switch (f->reg) { -+ case BCM6362_LEDCTRL: -+ reg = BCM6362_LED_REG; -+ mask = BIT(pg->pins[0]); -+ val = BIT(pg->pins[0]); -+ break; -+ case BCM6362_MODE: -+ reg = BCM6362_MODE_REG; -+ mask = BIT(pg->pins[0]); -+ val = BIT(pg->pins[0]); -+ break; -+ case BCM6362_CTRL: -+ reg = BCM6362_CTRL_REG; -+ mask = BIT(pg->pins[0]); -+ val = 0; -+ break; -+ case BCM6362_BASEMODE: -+ reg = BCM6362_BASEMODE_REG; -+ mask = f->basemode_mask; -+ val = f->basemode_mask; -+ break; -+ default: -+ WARN_ON(1); -+ return -EINVAL; -+ } -+ -+ regmap_update_bits(pc->regs, reg, mask, val); -+ -+ return 0; -+} -+ -+static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6362_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ -+ /* disable all functions using this pin */ -+ bcm6362_set_gpio(pc, offset); -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm6362_pctl_ops = { -+ .get_groups_count = bcm6362_pinctrl_get_group_count, -+ .get_group_name = bcm6362_pinctrl_get_group_name, -+ .get_group_pins = bcm6362_pinctrl_get_group_pins, -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+}; -+ -+static struct pinmux_ops bcm6362_pmx_ops = { -+ .get_functions_count = bcm6362_pinctrl_get_func_count, -+ .get_function_name = bcm6362_pinctrl_get_func_name, -+ .get_function_groups = bcm6362_pinctrl_get_groups, -+ .set_mux = bcm6362_pinctrl_set_mux, -+ .gpio_request_enable = bcm6362_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6362_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct bcm6362_pinctrl *pc; -+ int err; -+ -+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); -+ if (!pc) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, pc); -+ pc->dev = dev; -+ -+ pc->regs = syscon_node_to_regmap(dev->parent->of_node); -+ if (IS_ERR(pc->regs)) -+ return PTR_ERR(pc->regs); -+ -+ pc->gpio_chip.label = MODULE_NAME; -+ pc->gpio_chip.owner = THIS_MODULE; -+ pc->gpio_chip.request = gpiochip_generic_request; -+ pc->gpio_chip.free = gpiochip_generic_free; -+ pc->gpio_chip.direction_input = bcm6362_gpio_direction_input; -+ pc->gpio_chip.direction_output = bcm6362_gpio_direction_output; -+ pc->gpio_chip.get_direction = bcm6362_gpio_get_direction; -+ pc->gpio_chip.get = bcm6362_gpio_get; -+ pc->gpio_chip.set = bcm6362_gpio_set; -+ pc->gpio_chip.set_config = gpiochip_generic_config; -+ pc->gpio_chip.base = -1; -+ pc->gpio_chip.ngpio = BCM6362_NUM_GPIOS; -+ pc->gpio_chip.can_sleep = false; -+ pc->gpio_chip.parent = dev; -+ pc->gpio_chip.of_node = np; -+ -+ if (of_get_property(np, "interrupt-names", NULL)) -+ pc->gpio_chip.to_irq = bcm6362_gpio_to_irq; -+ -+ err = gpiochip_add_data(&pc->gpio_chip, pc); -+ if (err) { -+ dev_err(dev, "could not add GPIO chip\n"); -+ return err; -+ } -+ -+ pc->pctl_desc.name = MODULE_NAME, -+ pc->pctl_desc.pins = bcm6362_pins, -+ pc->pctl_desc.npins = ARRAY_SIZE(bcm6362_pins), -+ pc->pctl_desc.pctlops = &bcm6362_pctl_ops, -+ pc->pctl_desc.pmxops = &bcm6362_pmx_ops, -+ pc->pctl_desc.owner = THIS_MODULE, -+ -+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); -+ if (IS_ERR(pc->pctl_dev)) { -+ gpiochip_remove(&pc->gpio_chip); -+ return PTR_ERR(pc->pctl_dev); -+ } -+ -+ pc->gpio_range.name = MODULE_NAME; -+ pc->gpio_range.npins = BCM6362_NUM_GPIOS; -+ pc->gpio_range.base = pc->gpio_chip.base; -+ pc->gpio_range.gc = &pc->gpio_chip; -+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); -+ -+ dev_info(dev, "registered\n"); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6362_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6362-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6362_pinctrl_driver = { -+ .probe = bcm6362_pinctrl_probe, -+ .driver = { -+ .name = MODULE_NAME, -+ .of_match_table = bcm6362_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6362_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/406-Documentation-add-BCM6368-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/406-Documentation-add-BCM6368-pincontroller-binding-docu.patch deleted file mode 100644 index 59fbdaeaaa..0000000000 --- a/target/linux/bmips/patches-5.10/406-Documentation-add-BCM6368-pincontroller-binding-docu.patch +++ /dev/null @@ -1,276 +0,0 @@ -From 12f1d5123ee405266596eaea238d9810e0628d18 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Wed, 27 Jul 2016 11:36:51 +0200 -Subject: [PATCH 07/12] Documentation: add BCM6368 pincontroller binding - documentation -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add binding documentation for the pincontrol core found in BCM6368 SoCs. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - .../pinctrl/brcm,bcm6368-pinctrl.yaml | 255 ++++++++++++++++++ - 1 file changed, 255 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml -@@ -0,0 +1,255 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Broadcom BCM6368 pin controller -+ -+maintainers: -+ - Álvaro Fernández Rojas -+ - Jonas Gorski -+ -+description: |+ -+ The pin controller node should be the child of a syscon node. -+ -+ Refer to the the bindings described in -+ Documentation/devicetree/bindings/mfd/syscon.yaml -+ -+properties: -+ compatible: -+ const: brcm,bcm6368-pinctrl -+ -+ gpio-controller: true -+ -+ '#gpio-cells': -+ description: -+ Specifies the pin number and flags, as defined in -+ include/dt-bindings/gpio/gpio.h -+ const: 2 -+ -+ interrupts-extended: -+ description: -+ One interrupt per each of the 6 GPIO ports supported by the controller, -+ sorted by port number ascending order. -+ minItems: 6 -+ maxItems: 6 -+ -+patternProperties: -+ '^.*$': -+ if: -+ type: object -+ then: -+ properties: -+ function: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data, -+ serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led, -+ ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0, -+ robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb, -+ pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1, -+ pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4, -+ spi_cs5, uart1 ] -+ -+ pins: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, -+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, -+ gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23, -+ gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, -+ gpio31, uart1_grp ] -+ -+required: -+ - compatible -+ - gpio-controller -+ - '#gpio-cells' -+ -+additionalProperties: false -+ -+examples: -+ - | -+ gpio@10000080 { -+ compatible = "syscon", "simple-mfd"; -+ reg = <0x10000080 0x80>; -+ -+ pinctrl: pinctrl { -+ compatible = "brcm,bcm6368-pinctrl"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ interrupts-extended = <&ext_intc1 0 0>, -+ <&ext_intc1 1 0>, -+ <&ext_intc0 0 0>, -+ <&ext_intc0 1 0>, -+ <&ext_intc0 2 0>, -+ <&ext_intc0 3 0>; -+ interrupt-names = "gpio32", -+ "gpio33", -+ "gpio34", -+ "gpio35", -+ "gpio36", -+ "gpio37"; -+ -+ pinctrl_analog_afe_0: analog_afe_0 { -+ function = "analog_afe_0"; -+ pins = "gpio0"; -+ }; -+ -+ pinctrl_analog_afe_1: analog_afe_1 { -+ function = "analog_afe_1"; -+ pins = "gpio1"; -+ }; -+ -+ pinctrl_sys_irq: sys_irq { -+ function = "sys_irq"; -+ pins = "gpio2"; -+ }; -+ -+ pinctrl_serial_led: serial_led { -+ pinctrl_serial_led_data: serial_led_data { -+ function = "serial_led_data"; -+ pins = "gpio3"; -+ }; -+ -+ pinctrl_serial_led_clk: serial_led_clk { -+ function = "serial_led_clk"; -+ pins = "gpio4"; -+ }; -+ }; -+ -+ pinctrl_inet_led: inet_led { -+ function = "inet_led"; -+ pins = "gpio5"; -+ }; -+ -+ pinctrl_ephy0_led: ephy0_led { -+ function = "ephy0_led"; -+ pins = "gpio6"; -+ }; -+ -+ pinctrl_ephy1_led: ephy1_led { -+ function = "ephy1_led"; -+ pins = "gpio7"; -+ }; -+ -+ pinctrl_ephy2_led: ephy2_led { -+ function = "ephy2_led"; -+ pins = "gpio8"; -+ }; -+ -+ pinctrl_ephy3_led: ephy3_led { -+ function = "ephy3_led"; -+ pins = "gpio9"; -+ }; -+ -+ pinctrl_robosw_led_data: robosw_led_data { -+ function = "robosw_led_data"; -+ pins = "gpio10"; -+ }; -+ -+ pinctrl_robosw_led_clk: robosw_led_clk { -+ function = "robosw_led_clk"; -+ pins = "gpio11"; -+ }; -+ -+ pinctrl_robosw_led0: robosw_led0 { -+ function = "robosw_led0"; -+ pins = "gpio12"; -+ }; -+ -+ pinctrl_robosw_led1: robosw_led1 { -+ function = "robosw_led1"; -+ pins = "gpio13"; -+ }; -+ -+ pinctrl_usb_device_led: usb_device_led { -+ function = "usb_device_led"; -+ pins = "gpio14"; -+ }; -+ -+ pinctrl_pci: pci { -+ pinctrl_pci_req1: pci_req1 { -+ function = "pci_req1"; -+ pins = "gpio16"; -+ }; -+ -+ pinctrl_pci_gnt1: pci_gnt1 { -+ function = "pci_gnt1"; -+ pins = "gpio17"; -+ }; -+ -+ pinctrl_pci_intb: pci_intb { -+ function = "pci_intb"; -+ pins = "gpio18"; -+ }; -+ -+ pinctrl_pci_req0: pci_req0 { -+ function = "pci_req0"; -+ pins = "gpio19"; -+ }; -+ -+ pinctrl_pci_gnt0: pci_gnt0 { -+ function = "pci_gnt0"; -+ pins = "gpio20"; -+ }; -+ }; -+ -+ pinctrl_pcmcia: pcmcia { -+ pinctrl_pcmcia_cd1: pcmcia_cd1 { -+ function = "pcmcia_cd1"; -+ pins = "gpio22"; -+ }; -+ -+ pinctrl_pcmcia_cd2: pcmcia_cd2 { -+ function = "pcmcia_cd2"; -+ pins = "gpio23"; -+ }; -+ -+ pinctrl_pcmcia_vs1: pcmcia_vs1 { -+ function = "pcmcia_vs1"; -+ pins = "gpio24"; -+ }; -+ -+ pinctrl_pcmcia_vs2: pcmcia_vs2 { -+ function = "pcmcia_vs2"; -+ pins = "gpio25"; -+ }; -+ }; -+ -+ pinctrl_ebi_cs2: ebi_cs2 { -+ function = "ebi_cs2"; -+ pins = "gpio26"; -+ }; -+ -+ pinctrl_ebi_cs3: ebi_cs3 { -+ function = "ebi_cs3"; -+ pins = "gpio27"; -+ }; -+ -+ pinctrl_spi_cs2: spi_cs2 { -+ function = "spi_cs2"; -+ pins = "gpio28"; -+ }; -+ -+ pinctrl_spi_cs3: spi_cs3 { -+ function = "spi_cs3"; -+ pins = "gpio29"; -+ }; -+ -+ pinctrl_spi_cs4: spi_cs4 { -+ function = "spi_cs4"; -+ pins = "gpio30"; -+ }; -+ -+ pinctrl_spi_cs5: spi_cs5 { -+ function = "spi_cs5"; -+ pins = "gpio31"; -+ }; -+ -+ pinctrl_uart1: uart1 { -+ function = "uart1"; -+ group = "uart1_grp"; -+ }; -+ }; -+ }; diff --git a/target/linux/bmips/patches-5.10/407-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch b/target/linux/bmips/patches-5.10/407-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch deleted file mode 100644 index 5a5dac3487..0000000000 --- a/target/linux/bmips/patches-5.10/407-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch +++ /dev/null @@ -1,732 +0,0 @@ -From a212dcb2f04ae42f35ec11122a2532b1bcf8a94f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Fri, 24 Jun 2016 22:18:25 +0200 -Subject: [PATCH 08/12] pinctrl: add a pincontrol driver for BCM6368 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32 -GPIOs onto alternative functions. Not all are documented. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm/Kconfig | 11 + - drivers/pinctrl/bcm/Makefile | 1 + - drivers/pinctrl/bcm/pinctrl-bcm6368.c | 679 ++++++++++++++++++++++++++ - 3 files changed, 691 insertions(+) - create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c - ---- a/drivers/pinctrl/bcm/Kconfig -+++ b/drivers/pinctrl/bcm/Kconfig -@@ -62,6 +62,17 @@ config PINCTRL_BCM6362 - help - Say Y here to enable the Broadcom BCM6362 GPIO driver. - -+config PINCTRL_BCM6368 -+ bool "Broadcom BCM6368 GPIO driver" -+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) -+ select PINMUX -+ select PINCONF -+ select GENERIC_PINCONF -+ select MFD_SYSCON -+ default BMIPS_GENERIC -+ help -+ Say Y here to enable the Broadcom BCM6368 GPIO driver. -+ - config PINCTRL_IPROC_GPIO - bool "Broadcom iProc GPIO (with PINCONF) driver" - depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) ---- a/drivers/pinctrl/bcm/Makefile -+++ b/drivers/pinctrl/bcm/Makefile -@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctr - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o - obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o -+obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o - obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o - obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o - obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o ---- /dev/null -+++ b/drivers/pinctrl/bcm/pinctrl-bcm6368.c -@@ -0,0 +1,679 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Driver for BCM6368 GPIO unit (pinctrl + GPIO) -+ * -+ * Copyright (C) 2021 Álvaro Fernández Rojas -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#define MODULE_NAME "bcm6368-pinctrl" -+#define BCM6368_NUM_GPIOS 38 -+ -+#define BANK_SIZE sizeof(uint32_t) -+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) -+ -+#define BCM6368_DIROUT_REG 0x04 -+#define BCM6368_DATA_REG 0x0c -+#define BCM6368_MODE_REG 0x18 -+#define BCM6368_BASEMODE_REG 0x38 -+#define BCM6368_BASEMODE_MASK 0x7 -+#define BCM6368_BASEMODE_GPIO 0x0 -+#define BCM6368_BASEMODE_UART1 0x1 -+ -+struct bcm6368_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm6368_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ -+ unsigned dir_out:16; -+ unsigned basemode:3; -+}; -+ -+struct bcm6368_pinctrl { -+ struct device *dev; -+ struct regmap *regs; -+ struct regmap_field *overlays; -+ -+ struct pinctrl_dev *pctl_dev; -+ struct gpio_chip gpio_chip; -+ struct pinctrl_desc pctl_desc; -+ struct pinctrl_gpio_range gpio_range; -+}; -+ -+#define BCM6368_BASEMODE_PIN(a, b) \ -+ { \ -+ .number = a, \ -+ .name = b, \ -+ .drv_data = (void *)true \ -+ } -+ -+static const struct pinctrl_pin_desc bcm6368_pins[] = { -+ PINCTRL_PIN(0, "gpio0"), -+ PINCTRL_PIN(1, "gpio1"), -+ PINCTRL_PIN(2, "gpio2"), -+ PINCTRL_PIN(3, "gpio3"), -+ PINCTRL_PIN(4, "gpio4"), -+ PINCTRL_PIN(5, "gpio5"), -+ PINCTRL_PIN(6, "gpio6"), -+ PINCTRL_PIN(7, "gpio7"), -+ PINCTRL_PIN(8, "gpio8"), -+ PINCTRL_PIN(9, "gpio9"), -+ PINCTRL_PIN(10, "gpio10"), -+ PINCTRL_PIN(11, "gpio11"), -+ PINCTRL_PIN(12, "gpio12"), -+ PINCTRL_PIN(13, "gpio13"), -+ PINCTRL_PIN(14, "gpio14"), -+ PINCTRL_PIN(15, "gpio15"), -+ PINCTRL_PIN(16, "gpio16"), -+ PINCTRL_PIN(17, "gpio17"), -+ PINCTRL_PIN(18, "gpio18"), -+ PINCTRL_PIN(19, "gpio19"), -+ PINCTRL_PIN(20, "gpio20"), -+ PINCTRL_PIN(21, "gpio21"), -+ PINCTRL_PIN(22, "gpio22"), -+ PINCTRL_PIN(23, "gpio23"), -+ PINCTRL_PIN(24, "gpio24"), -+ PINCTRL_PIN(25, "gpio25"), -+ PINCTRL_PIN(26, "gpio26"), -+ PINCTRL_PIN(27, "gpio27"), -+ PINCTRL_PIN(28, "gpio28"), -+ PINCTRL_PIN(29, "gpio29"), -+ BCM6368_BASEMODE_PIN(30, "gpio30"), -+ BCM6368_BASEMODE_PIN(31, "gpio31"), -+ BCM6368_BASEMODE_PIN(32, "gpio32"), -+ BCM6368_BASEMODE_PIN(33, "gpio33"), -+ PINCTRL_PIN(34, "gpio34"), -+ PINCTRL_PIN(35, "gpio35"), -+ PINCTRL_PIN(36, "gpio36"), -+ PINCTRL_PIN(37, "gpio37"), -+}; -+ -+static unsigned gpio0_pins[] = { 0 }; -+static unsigned gpio1_pins[] = { 1 }; -+static unsigned gpio2_pins[] = { 2 }; -+static unsigned gpio3_pins[] = { 3 }; -+static unsigned gpio4_pins[] = { 4 }; -+static unsigned gpio5_pins[] = { 5 }; -+static unsigned gpio6_pins[] = { 6 }; -+static unsigned gpio7_pins[] = { 7 }; -+static unsigned gpio8_pins[] = { 8 }; -+static unsigned gpio9_pins[] = { 9 }; -+static unsigned gpio10_pins[] = { 10 }; -+static unsigned gpio11_pins[] = { 11 }; -+static unsigned gpio12_pins[] = { 12 }; -+static unsigned gpio13_pins[] = { 13 }; -+static unsigned gpio14_pins[] = { 14 }; -+static unsigned gpio15_pins[] = { 15 }; -+static unsigned gpio16_pins[] = { 16 }; -+static unsigned gpio17_pins[] = { 17 }; -+static unsigned gpio18_pins[] = { 18 }; -+static unsigned gpio19_pins[] = { 19 }; -+static unsigned gpio20_pins[] = { 20 }; -+static unsigned gpio21_pins[] = { 21 }; -+static unsigned gpio22_pins[] = { 22 }; -+static unsigned gpio23_pins[] = { 23 }; -+static unsigned gpio24_pins[] = { 24 }; -+static unsigned gpio25_pins[] = { 25 }; -+static unsigned gpio26_pins[] = { 26 }; -+static unsigned gpio27_pins[] = { 27 }; -+static unsigned gpio28_pins[] = { 28 }; -+static unsigned gpio29_pins[] = { 29 }; -+static unsigned gpio30_pins[] = { 30 }; -+static unsigned gpio31_pins[] = { 31 }; -+static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 }; -+ -+#define BCM6368_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } -+ -+static struct bcm6368_pingroup bcm6368_groups[] = { -+ BCM6368_GROUP(gpio0), -+ BCM6368_GROUP(gpio1), -+ BCM6368_GROUP(gpio2), -+ BCM6368_GROUP(gpio3), -+ BCM6368_GROUP(gpio4), -+ BCM6368_GROUP(gpio5), -+ BCM6368_GROUP(gpio6), -+ BCM6368_GROUP(gpio7), -+ BCM6368_GROUP(gpio8), -+ BCM6368_GROUP(gpio9), -+ BCM6368_GROUP(gpio10), -+ BCM6368_GROUP(gpio11), -+ BCM6368_GROUP(gpio12), -+ BCM6368_GROUP(gpio13), -+ BCM6368_GROUP(gpio14), -+ BCM6368_GROUP(gpio15), -+ BCM6368_GROUP(gpio16), -+ BCM6368_GROUP(gpio17), -+ BCM6368_GROUP(gpio18), -+ BCM6368_GROUP(gpio19), -+ BCM6368_GROUP(gpio20), -+ BCM6368_GROUP(gpio21), -+ BCM6368_GROUP(gpio22), -+ BCM6368_GROUP(gpio23), -+ BCM6368_GROUP(gpio24), -+ BCM6368_GROUP(gpio25), -+ BCM6368_GROUP(gpio26), -+ BCM6368_GROUP(gpio27), -+ BCM6368_GROUP(gpio28), -+ BCM6368_GROUP(gpio29), -+ BCM6368_GROUP(gpio30), -+ BCM6368_GROUP(gpio31), -+ BCM6368_GROUP(uart1_grp), -+}; -+ -+static const char * const analog_afe_0_groups[] = { -+ "gpio0", -+}; -+ -+static const char * const analog_afe_1_groups[] = { -+ "gpio1", -+}; -+ -+static const char * const sys_irq_groups[] = { -+ "gpio2", -+}; -+ -+static const char * const serial_led_data_groups[] = { -+ "gpio3", -+}; -+ -+static const char * const serial_led_clk_groups[] = { -+ "gpio4", -+}; -+ -+static const char * const inet_led_groups[] = { -+ "gpio5", -+}; -+ -+static const char * const ephy0_led_groups[] = { -+ "gpio6", -+}; -+ -+static const char * const ephy1_led_groups[] = { -+ "gpio7", -+}; -+ -+static const char * const ephy2_led_groups[] = { -+ "gpio8", -+}; -+ -+static const char * const ephy3_led_groups[] = { -+ "gpio9", -+}; -+ -+static const char * const robosw_led_data_groups[] = { -+ "gpio10", -+}; -+ -+static const char * const robosw_led_clk_groups[] = { -+ "gpio11", -+}; -+ -+static const char * const robosw_led0_groups[] = { -+ "gpio12", -+}; -+ -+static const char * const robosw_led1_groups[] = { -+ "gpio13", -+}; -+ -+static const char * const usb_device_led_groups[] = { -+ "gpio14", -+}; -+ -+static const char * const pci_req1_groups[] = { -+ "gpio16", -+}; -+ -+static const char * const pci_gnt1_groups[] = { -+ "gpio17", -+}; -+ -+static const char * const pci_intb_groups[] = { -+ "gpio18", -+}; -+ -+static const char * const pci_req0_groups[] = { -+ "gpio19", -+}; -+ -+static const char * const pci_gnt0_groups[] = { -+ "gpio20", -+}; -+ -+static const char * const pcmcia_cd1_groups[] = { -+ "gpio22", -+}; -+ -+static const char * const pcmcia_cd2_groups[] = { -+ "gpio23", -+}; -+ -+static const char * const pcmcia_vs1_groups[] = { -+ "gpio24", -+}; -+ -+static const char * const pcmcia_vs2_groups[] = { -+ "gpio25", -+}; -+ -+static const char * const ebi_cs2_groups[] = { -+ "gpio26", -+}; -+ -+static const char * const ebi_cs3_groups[] = { -+ "gpio27", -+}; -+ -+static const char * const spi_cs2_groups[] = { -+ "gpio28", -+}; -+ -+static const char * const spi_cs3_groups[] = { -+ "gpio29", -+}; -+ -+static const char * const spi_cs4_groups[] = { -+ "gpio30", -+}; -+ -+static const char * const spi_cs5_groups[] = { -+ "gpio31", -+}; -+ -+static const char * const uart1_groups[] = { -+ "uart1_grp", -+}; -+ -+#define BCM6368_FUN(n, out) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .dir_out = out, \ -+ } -+ -+#define BCM6368_BASEMODE_FUN(n, val, out) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .basemode = BCM6368_BASEMODE_##val, \ -+ .dir_out = out, \ -+ } -+ -+static const struct bcm6368_function bcm6368_funcs[] = { -+ BCM6368_FUN(analog_afe_0, 1), -+ BCM6368_FUN(analog_afe_1, 1), -+ BCM6368_FUN(sys_irq, 1), -+ BCM6368_FUN(serial_led_data, 1), -+ BCM6368_FUN(serial_led_clk, 1), -+ BCM6368_FUN(inet_led, 1), -+ BCM6368_FUN(ephy0_led, 1), -+ BCM6368_FUN(ephy1_led, 1), -+ BCM6368_FUN(ephy2_led, 1), -+ BCM6368_FUN(ephy3_led, 1), -+ BCM6368_FUN(robosw_led_data, 1), -+ BCM6368_FUN(robosw_led_clk, 1), -+ BCM6368_FUN(robosw_led0, 1), -+ BCM6368_FUN(robosw_led1, 1), -+ BCM6368_FUN(usb_device_led, 1), -+ BCM6368_FUN(pci_req1, 0), -+ BCM6368_FUN(pci_gnt1, 0), -+ BCM6368_FUN(pci_intb, 0), -+ BCM6368_FUN(pci_req0, 0), -+ BCM6368_FUN(pci_gnt0, 0), -+ BCM6368_FUN(pcmcia_cd1, 0), -+ BCM6368_FUN(pcmcia_cd2, 0), -+ BCM6368_FUN(pcmcia_vs1, 0), -+ BCM6368_FUN(pcmcia_vs2, 0), -+ BCM6368_FUN(ebi_cs2, 1), -+ BCM6368_FUN(ebi_cs3, 1), -+ BCM6368_FUN(spi_cs2, 1), -+ BCM6368_FUN(spi_cs3, 1), -+ BCM6368_FUN(spi_cs4, 1), -+ BCM6368_FUN(spi_cs5, 1), -+ BCM6368_BASEMODE_FUN(uart1, UART1, 0x6), -+}; -+ -+static inline unsigned int bcm6368_bank_pin(unsigned int pin) -+{ -+ return pin % PINS_PER_BANK; -+} -+ -+static inline unsigned int bcm6368_reg_off(unsigned int reg, unsigned int pin) -+{ -+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; -+} -+ -+static int bcm6368_gpio_direction_input(struct gpio_chip *chip, -+ unsigned int pin) -+{ -+ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm6368_reg_off(BCM6368_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6368_bank_pin(pin); -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an input GPIO -+ */ -+ ret = pinctrl_gpio_direction_input(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); -+ -+ return 0; -+} -+ -+static int bcm6368_gpio_direction_output(struct gpio_chip *chip, -+ unsigned int pin, int value) -+{ -+ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6368_reg_off(BCM6368_DATA_REG, pin); -+ unsigned int dirout = bcm6368_reg_off(BCM6368_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6368_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an output GPIO -+ */ -+ ret = pinctrl_gpio_direction_output(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+ -+ return 0; -+} -+ -+static int bcm6368_gpio_get(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6368_reg_off(BCM6368_DATA_REG, pin); -+ unsigned int bank_pin = bcm6368_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, data, &val); -+ -+ return !!(val & BIT(bank_pin)); -+} -+ -+static int bcm6368_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm6368_reg_off(BCM6368_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6368_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, dirout, &val); -+ -+ if (val & BIT(bank_pin)) -+ return GPIO_LINE_DIRECTION_OUT; -+ -+ return GPIO_LINE_DIRECTION_IN; -+} -+ -+static void bcm6368_gpio_set(struct gpio_chip *chip, unsigned int pin, -+ int value) -+{ -+ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6368_reg_off(BCM6368_DATA_REG, pin); -+ unsigned int bank_pin = bcm6368_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+} -+ -+static int bcm6368_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ char irq_name[7]; -+ -+ sprintf(irq_name, "gpio%d", gpio); -+ -+ return of_irq_get_byname(chip->of_node, irq_name); -+} -+ -+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6368_groups); -+} -+ -+static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6368_groups[group].name; -+} -+ -+static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6368_groups[group].pins; -+ *num_pins = bcm6368_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6368_funcs); -+} -+ -+static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6368_funcs[selector].name; -+} -+ -+static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6368_funcs[selector].groups; -+ *num_groups = bcm6368_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6368_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6368_pingroup *pg = &bcm6368_groups[group]; -+ const struct bcm6368_function *fun = &bcm6368_funcs[selector]; -+ int i, pin; -+ -+ if (fun->basemode) { -+ unsigned int mask = 0; -+ -+ for (i = 0; i < pg->num_pins; i++) { -+ pin = pg->pins[i]; -+ if (pin < PINS_PER_BANK) -+ mask |= BIT(pin); -+ } -+ -+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, mask, 0); -+ regmap_field_write(pc->overlays, fun->basemode); -+ } else { -+ pin = pg->pins[0]; -+ -+ if (bcm6368_pins[pin].drv_data) -+ regmap_field_write(pc->overlays, -+ BCM6368_BASEMODE_GPIO); -+ -+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(pin), -+ BIT(pin)); -+ } -+ -+ for (pin = 0; pin < pg->num_pins; pin++) { -+ int hw_gpio = bcm6368_pins[pin].number; -+ struct gpio_chip *gc = &pc->gpio_chip; -+ -+ if (fun->dir_out & BIT(pin)) -+ gc->direction_output(gc, hw_gpio, 0); -+ else -+ gc->direction_input(gc, hw_gpio); -+ } -+ -+ return 0; -+} -+ -+static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6368_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ -+ if (offset >= PINS_PER_BANK && !bcm6368_pins[offset].drv_data) -+ return 0; -+ -+ /* disable all functions using this pin */ -+ if (offset < PINS_PER_BANK) -+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(offset), 0); -+ -+ if (bcm6368_pins[offset].drv_data) -+ regmap_field_write(pc->overlays, BCM6368_BASEMODE_GPIO); -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm6368_pctl_ops = { -+ .get_groups_count = bcm6368_pinctrl_get_group_count, -+ .get_group_name = bcm6368_pinctrl_get_group_name, -+ .get_group_pins = bcm6368_pinctrl_get_group_pins, -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+}; -+ -+static struct pinmux_ops bcm6368_pmx_ops = { -+ .get_functions_count = bcm6368_pinctrl_get_func_count, -+ .get_function_name = bcm6368_pinctrl_get_func_name, -+ .get_function_groups = bcm6368_pinctrl_get_groups, -+ .set_mux = bcm6368_pinctrl_set_mux, -+ .gpio_request_enable = bcm6368_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6368_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct reg_field overlays = REG_FIELD(BCM6368_BASEMODE_REG, 0, 15); -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct bcm6368_pinctrl *pc; -+ int err; -+ -+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); -+ if (!pc) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, pc); -+ pc->dev = dev; -+ -+ pc->regs = syscon_node_to_regmap(dev->parent->of_node); -+ if (IS_ERR(pc->regs)) -+ return PTR_ERR(pc->regs); -+ -+ pc->overlays = devm_regmap_field_alloc(&pdev->dev, pc->regs, overlays); -+ if (IS_ERR(pc->overlays)) -+ return PTR_ERR(pc->overlays); -+ -+ /* disable all muxes by default */ -+ regmap_field_write(pc->overlays, 0); -+ -+ pc->gpio_chip.label = MODULE_NAME; -+ pc->gpio_chip.owner = THIS_MODULE; -+ pc->gpio_chip.request = gpiochip_generic_request; -+ pc->gpio_chip.free = gpiochip_generic_free; -+ pc->gpio_chip.direction_input = bcm6368_gpio_direction_input; -+ pc->gpio_chip.direction_output = bcm6368_gpio_direction_output; -+ pc->gpio_chip.get_direction = bcm6368_gpio_get_direction; -+ pc->gpio_chip.get = bcm6368_gpio_get; -+ pc->gpio_chip.set = bcm6368_gpio_set; -+ pc->gpio_chip.set_config = gpiochip_generic_config; -+ pc->gpio_chip.base = -1; -+ pc->gpio_chip.ngpio = BCM6368_NUM_GPIOS; -+ pc->gpio_chip.can_sleep = false; -+ pc->gpio_chip.parent = dev; -+ pc->gpio_chip.of_node = np; -+ -+ if (of_get_property(np, "interrupt-names", NULL)) -+ pc->gpio_chip.to_irq = bcm6368_gpio_to_irq; -+ -+ err = gpiochip_add_data(&pc->gpio_chip, pc); -+ if (err) { -+ dev_err(dev, "could not add GPIO chip\n"); -+ return err; -+ } -+ -+ pc->pctl_desc.name = MODULE_NAME, -+ pc->pctl_desc.pins = bcm6368_pins, -+ pc->pctl_desc.npins = ARRAY_SIZE(bcm6368_pins), -+ pc->pctl_desc.pctlops = &bcm6368_pctl_ops, -+ pc->pctl_desc.pmxops = &bcm6368_pmx_ops, -+ pc->pctl_desc.owner = THIS_MODULE, -+ -+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); -+ if (IS_ERR(pc->pctl_dev)) { -+ gpiochip_remove(&pc->gpio_chip); -+ return PTR_ERR(pc->pctl_dev); -+ } -+ -+ pc->gpio_range.name = MODULE_NAME; -+ pc->gpio_range.npins = BCM6368_NUM_GPIOS; -+ pc->gpio_range.base = pc->gpio_chip.base; -+ pc->gpio_range.gc = &pc->gpio_chip; -+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); -+ -+ dev_info(dev, "registered\n"); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6368_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6368-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6368_pinctrl_driver = { -+ .probe = bcm6368_pinctrl_probe, -+ .driver = { -+ .name = MODULE_NAME, -+ .of_match_table = bcm6368_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6368_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/408-Documentation-add-BCM63268-pincontroller-binding-doc.patch b/target/linux/bmips/patches-5.10/408-Documentation-add-BCM63268-pincontroller-binding-doc.patch deleted file mode 100644 index d51af84328..0000000000 --- a/target/linux/bmips/patches-5.10/408-Documentation-add-BCM63268-pincontroller-binding-doc.patch +++ /dev/null @@ -1,220 +0,0 @@ -From 826266914f8397c996d2d4d821b315d614bfc325 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Wed, 27 Jul 2016 11:37:08 +0200 -Subject: [PATCH 09/12] Documentation: add BCM63268 pincontroller binding - documentation -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add binding documentation for the pincontrol core found in the BCM63268 -family SoCs. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - .../pinctrl/brcm,bcm63268-pinctrl.yaml | 198 ++++++++++++++++++ - 1 file changed, 198 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml -@@ -0,0 +1,198 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Broadcom BCM63268 pin controller -+ -+maintainers: -+ - Álvaro Fernández Rojas -+ - Jonas Gorski -+ -+description: |+ -+ The pin controller node should be the child of a syscon node. -+ -+ Refer to the the bindings described in -+ Documentation/devicetree/bindings/mfd/syscon.yaml -+ -+properties: -+ compatible: -+ const: brcm,bcm63268-pinctrl -+ -+ gpio-controller: true -+ -+ '#gpio-cells': -+ description: -+ Specifies the pin number and flags, as defined in -+ include/dt-bindings/gpio/gpio.h -+ const: 2 -+ -+ interrupts-extended: -+ description: -+ One interrupt per each of the 4 GPIO ports supported by the controller, -+ sorted by port number ascending order. -+ minItems: 4 -+ maxItems: 4 -+ -+patternProperties: -+ '^.*$': -+ if: -+ type: object -+ then: -+ properties: -+ function: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5, -+ hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi, -+ vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data, -+ nand, gpio35_alt, dectpd, vdsl_phy_override_0, -+ vdsl_phy_override_1, vdsl_phy_override_2, -+ vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ] -+ -+ pins: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19, -+ gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35 -+ dectpd_grp, vdsl_phy_override_0_grp, -+ vdsl_phy_override_1_grp, vdsl_phy_override_2_grp, -+ vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] -+ -+required: -+ - compatible -+ - gpio-controller -+ - '#gpio-cells' -+ -+additionalProperties: false -+ -+examples: -+ - | -+ gpio@100000c0 { -+ compatible = "syscon", "simple-mfd"; -+ reg = <0x100000c0 0x80>; -+ -+ pinctrl: pinctrl { -+ compatible = "brcm,bcm63268-pinctrl"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ interrupts-extended = <&ext_intc 0 0>, -+ <&ext_intc 1 0>, -+ <&ext_intc 2 0>, -+ <&ext_intc 3 0>; -+ interrupt-names = "gpio32", -+ "gpio33", -+ "gpio34", -+ "gpio35"; -+ -+ pinctrl_serial_led: serial_led { -+ pinctrl_serial_led_clk: serial_led_clk { -+ function = "serial_led_clk"; -+ pins = "gpio0"; -+ }; -+ -+ pinctrl_serial_led_data: serial_led_data { -+ function = "serial_led_data"; -+ pins = "gpio1"; -+ }; -+ }; -+ -+ pinctrl_hsspi_cs4: hsspi_cs4 { -+ function = "hsspi_cs4"; -+ pins = "gpio16"; -+ }; -+ -+ pinctrl_hsspi_cs5: hsspi_cs5 { -+ function = "hsspi_cs5"; -+ pins = "gpio17"; -+ }; -+ -+ pinctrl_hsspi_cs6: hsspi_cs6 { -+ function = "hsspi_cs6"; -+ pins = "gpio8"; -+ }; -+ -+ pinctrl_hsspi_cs7: hsspi_cs7 { -+ function = "hsspi_cs7"; -+ pins = "gpio9"; -+ }; -+ -+ pinctrl_adsl_spi: adsl_spi { -+ pinctrl_adsl_spi_miso: adsl_spi_miso { -+ function = "adsl_spi_miso"; -+ pins = "gpio18"; -+ }; -+ -+ pinctrl_adsl_spi_mosi: adsl_spi_mosi { -+ function = "adsl_spi_mosi"; -+ pins = "gpio19"; -+ }; -+ }; -+ -+ pinctrl_vreq_clk: vreq_clk { -+ function = "vreq_clk"; -+ pins = "gpio22"; -+ }; -+ -+ pinctrl_pcie_clkreq_b: pcie_clkreq_b { -+ function = "pcie_clkreq_b"; -+ pins = "gpio23"; -+ }; -+ -+ pinctrl_robosw_led_clk: robosw_led_clk { -+ function = "robosw_led_clk"; -+ pins = "gpio30"; -+ }; -+ -+ pinctrl_robosw_led_data: robosw_led_data { -+ function = "robosw_led_data"; -+ pins = "gpio31"; -+ }; -+ -+ pinctrl_nand: nand { -+ function = "nand"; -+ group = "nand_grp"; -+ }; -+ -+ pinctrl_gpio35_alt: gpio35_alt { -+ function = "gpio35_alt"; -+ pin = "gpio35"; -+ }; -+ -+ pinctrl_dectpd: dectpd { -+ function = "dectpd"; -+ group = "dectpd_grp"; -+ }; -+ -+ pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 { -+ function = "vdsl_phy_override_0"; -+ group = "vdsl_phy_override_0_grp"; -+ }; -+ -+ pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 { -+ function = "vdsl_phy_override_1"; -+ group = "vdsl_phy_override_1_grp"; -+ }; -+ -+ pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 { -+ function = "vdsl_phy_override_2"; -+ group = "vdsl_phy_override_2_grp"; -+ }; -+ -+ pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 { -+ function = "vdsl_phy_override_3"; -+ group = "vdsl_phy_override_3_grp"; -+ }; -+ -+ pinctrl_dsl_gpio8: dsl_gpio8 { -+ function = "dsl_gpio8"; -+ group = "dsl_gpio8"; -+ }; -+ -+ pinctrl_dsl_gpio9: dsl_gpio9 { -+ function = "dsl_gpio9"; -+ group = "dsl_gpio9"; -+ }; -+ }; -+ }; diff --git a/target/linux/bmips/patches-5.10/409-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch b/target/linux/bmips/patches-5.10/409-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch deleted file mode 100644 index 8acc5dbfbb..0000000000 --- a/target/linux/bmips/patches-5.10/409-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch +++ /dev/null @@ -1,875 +0,0 @@ -From 8ec959299a6e4bbdc65d62180aa952ae04cdcf07 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Fri, 24 Jun 2016 22:19:12 +0200 -Subject: [PATCH 10/12] pinctrl: add a pincontrol driver for BCM63268 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs -to different functions. Depending on the mux, these are either single -pin configurations or whole pin groups. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm/Kconfig | 11 + - drivers/pinctrl/bcm/Makefile | 1 + - drivers/pinctrl/bcm/pinctrl-bcm63268.c | 821 +++++++++++++++++++++++++ - 3 files changed, 833 insertions(+) - create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63268.c - ---- a/drivers/pinctrl/bcm/Kconfig -+++ b/drivers/pinctrl/bcm/Kconfig -@@ -73,6 +73,17 @@ config PINCTRL_BCM6368 - help - Say Y here to enable the Broadcom BCM6368 GPIO driver. - -+config PINCTRL_BCM63268 -+ bool "Broadcom BCM63268 GPIO driver" -+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) -+ select PINMUX -+ select PINCONF -+ select GENERIC_PINCONF -+ select MFD_SYSCON -+ default BMIPS_GENERIC -+ help -+ Say Y here to enable the Broadcom BCM63268 GPIO driver. -+ - config PINCTRL_IPROC_GPIO - bool "Broadcom iProc GPIO (with PINCONF) driver" - depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) ---- a/drivers/pinctrl/bcm/Makefile -+++ b/drivers/pinctrl/bcm/Makefile -@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_BCM6328) += pinctr - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o - obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o - obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o -+obj-$(CONFIG_PINCTRL_BCM63268) += pinctrl-bcm63268.o - obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o - obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o - obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o ---- /dev/null -+++ b/drivers/pinctrl/bcm/pinctrl-bcm63268.c -@@ -0,0 +1,821 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Driver for BCM63268 GPIO unit (pinctrl + GPIO) -+ * -+ * Copyright (C) 2021 Álvaro Fernández Rojas -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#define MODULE_NAME "bcm63268-pinctrl" -+#define BCM63268_NUM_GPIOS 52 -+#define BCM63268_NUM_LEDS 24 -+ -+#define BANK_SIZE sizeof(uint32_t) -+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) -+ -+#define BCM63268_DIROUT_REG 0x04 -+#define BCM63268_DATA_REG 0x0c -+#define BCM63268_LED_REG 0x10 -+#define BCM63268_MODE_REG 0x18 -+#define BCM63268_CTRL_REG 0x1c -+#define BCM63268_BASEMODE_REG 0x38 -+#define BCM63268_BASEMODE_NAND BIT(2) /* GPIOs 2-7, 24-31 */ -+#define BCM63268_BASEMODE_GPIO35 BIT(4) /* GPIO 35 */ -+#define BCM63268_BASEMODE_DECTPD BIT(5) /* GPIOs 8/9 */ -+#define BCM63268_BASEMODE_VDSL_PHY_0 BIT(6) /* GPIOs 10/11 */ -+#define BCM63268_BASEMODE_VDSL_PHY_1 BIT(7) /* GPIOs 12/13 */ -+#define BCM63268_BASEMODE_VDSL_PHY_2 BIT(8) /* GPIOs 24/25 */ -+#define BCM63268_BASEMODE_VDSL_PHY_3 BIT(9) /* GPIOs 26/27 */ -+ -+enum bcm63268_pinctrl_reg { -+ BCM63268_LEDCTRL, -+ BCM63268_MODE, -+ BCM63268_CTRL, -+ BCM63268_BASEMODE, -+}; -+ -+struct bcm63268_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm63268_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ -+ enum bcm63268_pinctrl_reg reg; -+ uint32_t mask; -+}; -+ -+struct bcm63268_pinctrl { -+ struct device *dev; -+ struct regmap *regs; -+ -+ struct pinctrl_dev *pctl_dev; -+ struct gpio_chip gpio_chip; -+ struct pinctrl_desc pctl_desc; -+ struct pinctrl_gpio_range gpio_range; -+}; -+ -+#define BCM63268_PIN(a, b, basemode) \ -+ { \ -+ .number = a, \ -+ .name = b, \ -+ .drv_data = (void *)(basemode) \ -+ } -+ -+static const struct pinctrl_pin_desc bcm63268_pins[] = { -+ PINCTRL_PIN(0, "gpio0"), -+ PINCTRL_PIN(1, "gpio1"), -+ BCM63268_PIN(2, "gpio2", BCM63268_BASEMODE_NAND), -+ BCM63268_PIN(3, "gpio3", BCM63268_BASEMODE_NAND), -+ BCM63268_PIN(4, "gpio4", BCM63268_BASEMODE_NAND), -+ BCM63268_PIN(5, "gpio5", BCM63268_BASEMODE_NAND), -+ BCM63268_PIN(6, "gpio6", BCM63268_BASEMODE_NAND), -+ BCM63268_PIN(7, "gpio7", BCM63268_BASEMODE_NAND), -+ BCM63268_PIN(8, "gpio8", BCM63268_BASEMODE_DECTPD), -+ BCM63268_PIN(9, "gpio9", BCM63268_BASEMODE_DECTPD), -+ BCM63268_PIN(10, "gpio10", BCM63268_BASEMODE_VDSL_PHY_0), -+ BCM63268_PIN(11, "gpio11", BCM63268_BASEMODE_VDSL_PHY_0), -+ BCM63268_PIN(12, "gpio12", BCM63268_BASEMODE_VDSL_PHY_1), -+ BCM63268_PIN(13, "gpio13", BCM63268_BASEMODE_VDSL_PHY_1), -+ PINCTRL_PIN(14, "gpio14"), -+ PINCTRL_PIN(15, "gpio15"), -+ PINCTRL_PIN(16, "gpio16"), -+ PINCTRL_PIN(17, "gpio17"), -+ PINCTRL_PIN(18, "gpio18"), -+ PINCTRL_PIN(19, "gpio19"), -+ PINCTRL_PIN(20, "gpio20"), -+ PINCTRL_PIN(21, "gpio21"), -+ PINCTRL_PIN(22, "gpio22"), -+ PINCTRL_PIN(23, "gpio23"), -+ BCM63268_PIN(24, "gpio24", -+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_2), -+ BCM63268_PIN(25, "gpio25", -+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_2), -+ BCM63268_PIN(26, "gpio26", -+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_3), -+ BCM63268_PIN(27, "gpio27", -+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_3), -+ BCM63268_PIN(28, "gpio28", BCM63268_BASEMODE_NAND), -+ BCM63268_PIN(29, "gpio29", BCM63268_BASEMODE_NAND), -+ BCM63268_PIN(30, "gpio30", BCM63268_BASEMODE_NAND), -+ BCM63268_PIN(31, "gpio31", BCM63268_BASEMODE_NAND), -+ PINCTRL_PIN(32, "gpio32"), -+ PINCTRL_PIN(33, "gpio33"), -+ PINCTRL_PIN(34, "gpio34"), -+ PINCTRL_PIN(35, "gpio35"), -+ PINCTRL_PIN(36, "gpio36"), -+ PINCTRL_PIN(37, "gpio37"), -+ PINCTRL_PIN(38, "gpio38"), -+ PINCTRL_PIN(39, "gpio39"), -+ PINCTRL_PIN(40, "gpio40"), -+ PINCTRL_PIN(41, "gpio41"), -+ PINCTRL_PIN(42, "gpio42"), -+ PINCTRL_PIN(43, "gpio43"), -+ PINCTRL_PIN(44, "gpio44"), -+ PINCTRL_PIN(45, "gpio45"), -+ PINCTRL_PIN(46, "gpio46"), -+ PINCTRL_PIN(47, "gpio47"), -+ PINCTRL_PIN(48, "gpio48"), -+ PINCTRL_PIN(49, "gpio49"), -+ PINCTRL_PIN(50, "gpio50"), -+ PINCTRL_PIN(51, "gpio51"), -+}; -+ -+static unsigned gpio0_pins[] = { 0 }; -+static unsigned gpio1_pins[] = { 1 }; -+static unsigned gpio2_pins[] = { 2 }; -+static unsigned gpio3_pins[] = { 3 }; -+static unsigned gpio4_pins[] = { 4 }; -+static unsigned gpio5_pins[] = { 5 }; -+static unsigned gpio6_pins[] = { 6 }; -+static unsigned gpio7_pins[] = { 7 }; -+static unsigned gpio8_pins[] = { 8 }; -+static unsigned gpio9_pins[] = { 9 }; -+static unsigned gpio10_pins[] = { 10 }; -+static unsigned gpio11_pins[] = { 11 }; -+static unsigned gpio12_pins[] = { 12 }; -+static unsigned gpio13_pins[] = { 13 }; -+static unsigned gpio14_pins[] = { 14 }; -+static unsigned gpio15_pins[] = { 15 }; -+static unsigned gpio16_pins[] = { 16 }; -+static unsigned gpio17_pins[] = { 17 }; -+static unsigned gpio18_pins[] = { 18 }; -+static unsigned gpio19_pins[] = { 19 }; -+static unsigned gpio20_pins[] = { 20 }; -+static unsigned gpio21_pins[] = { 21 }; -+static unsigned gpio22_pins[] = { 22 }; -+static unsigned gpio23_pins[] = { 23 }; -+static unsigned gpio24_pins[] = { 24 }; -+static unsigned gpio25_pins[] = { 25 }; -+static unsigned gpio26_pins[] = { 26 }; -+static unsigned gpio27_pins[] = { 27 }; -+static unsigned gpio28_pins[] = { 28 }; -+static unsigned gpio29_pins[] = { 29 }; -+static unsigned gpio30_pins[] = { 30 }; -+static unsigned gpio31_pins[] = { 31 }; -+static unsigned gpio32_pins[] = { 32 }; -+static unsigned gpio33_pins[] = { 33 }; -+static unsigned gpio34_pins[] = { 34 }; -+static unsigned gpio35_pins[] = { 35 }; -+static unsigned gpio36_pins[] = { 36 }; -+static unsigned gpio37_pins[] = { 37 }; -+static unsigned gpio38_pins[] = { 38 }; -+static unsigned gpio39_pins[] = { 39 }; -+static unsigned gpio40_pins[] = { 40 }; -+static unsigned gpio41_pins[] = { 41 }; -+static unsigned gpio42_pins[] = { 42 }; -+static unsigned gpio43_pins[] = { 43 }; -+static unsigned gpio44_pins[] = { 44 }; -+static unsigned gpio45_pins[] = { 45 }; -+static unsigned gpio46_pins[] = { 46 }; -+static unsigned gpio47_pins[] = { 47 }; -+static unsigned gpio48_pins[] = { 48 }; -+static unsigned gpio49_pins[] = { 49 }; -+static unsigned gpio50_pins[] = { 50 }; -+static unsigned gpio51_pins[] = { 51 }; -+ -+static unsigned nand_grp_pins[] = { -+ 2, 3, 4, 5, 6, 7, 24, -+ 25, 26, 27, 28, 29, 30, 31, -+}; -+ -+static unsigned dectpd_grp_pins[] = { 8, 9 }; -+static unsigned vdsl_phy0_grp_pins[] = { 10, 11 }; -+static unsigned vdsl_phy1_grp_pins[] = { 12, 13 }; -+static unsigned vdsl_phy2_grp_pins[] = { 24, 25 }; -+static unsigned vdsl_phy3_grp_pins[] = { 26, 27 }; -+ -+#define BCM63268_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } -+ -+static struct bcm63268_pingroup bcm63268_groups[] = { -+ BCM63268_GROUP(gpio0), -+ BCM63268_GROUP(gpio1), -+ BCM63268_GROUP(gpio2), -+ BCM63268_GROUP(gpio3), -+ BCM63268_GROUP(gpio4), -+ BCM63268_GROUP(gpio5), -+ BCM63268_GROUP(gpio6), -+ BCM63268_GROUP(gpio7), -+ BCM63268_GROUP(gpio8), -+ BCM63268_GROUP(gpio9), -+ BCM63268_GROUP(gpio10), -+ BCM63268_GROUP(gpio11), -+ BCM63268_GROUP(gpio12), -+ BCM63268_GROUP(gpio13), -+ BCM63268_GROUP(gpio14), -+ BCM63268_GROUP(gpio15), -+ BCM63268_GROUP(gpio16), -+ BCM63268_GROUP(gpio17), -+ BCM63268_GROUP(gpio18), -+ BCM63268_GROUP(gpio19), -+ BCM63268_GROUP(gpio20), -+ BCM63268_GROUP(gpio21), -+ BCM63268_GROUP(gpio22), -+ BCM63268_GROUP(gpio23), -+ BCM63268_GROUP(gpio24), -+ BCM63268_GROUP(gpio25), -+ BCM63268_GROUP(gpio26), -+ BCM63268_GROUP(gpio27), -+ BCM63268_GROUP(gpio28), -+ BCM63268_GROUP(gpio29), -+ BCM63268_GROUP(gpio30), -+ BCM63268_GROUP(gpio31), -+ BCM63268_GROUP(gpio32), -+ BCM63268_GROUP(gpio33), -+ BCM63268_GROUP(gpio34), -+ BCM63268_GROUP(gpio35), -+ BCM63268_GROUP(gpio36), -+ BCM63268_GROUP(gpio37), -+ BCM63268_GROUP(gpio38), -+ BCM63268_GROUP(gpio39), -+ BCM63268_GROUP(gpio40), -+ BCM63268_GROUP(gpio41), -+ BCM63268_GROUP(gpio42), -+ BCM63268_GROUP(gpio43), -+ BCM63268_GROUP(gpio44), -+ BCM63268_GROUP(gpio45), -+ BCM63268_GROUP(gpio46), -+ BCM63268_GROUP(gpio47), -+ BCM63268_GROUP(gpio48), -+ BCM63268_GROUP(gpio49), -+ BCM63268_GROUP(gpio50), -+ BCM63268_GROUP(gpio51), -+ -+ /* multi pin groups */ -+ BCM63268_GROUP(nand_grp), -+ BCM63268_GROUP(dectpd_grp), -+ BCM63268_GROUP(vdsl_phy0_grp), -+ BCM63268_GROUP(vdsl_phy1_grp), -+ BCM63268_GROUP(vdsl_phy2_grp), -+ BCM63268_GROUP(vdsl_phy3_grp), -+}; -+ -+static const char * const led_groups[] = { -+ "gpio0", -+ "gpio1", -+ "gpio2", -+ "gpio3", -+ "gpio4", -+ "gpio5", -+ "gpio6", -+ "gpio7", -+ "gpio8", -+ "gpio9", -+ "gpio10", -+ "gpio11", -+ "gpio12", -+ "gpio13", -+ "gpio14", -+ "gpio15", -+ "gpio16", -+ "gpio17", -+ "gpio18", -+ "gpio19", -+ "gpio20", -+ "gpio21", -+ "gpio22", -+ "gpio23", -+}; -+ -+static const char * const serial_led_clk_groups[] = { -+ "gpio0", -+}; -+ -+static const char * const serial_led_data_groups[] = { -+ "gpio1", -+}; -+ -+static const char * const hsspi_cs4_groups[] = { -+ "gpio16", -+}; -+ -+static const char * const hsspi_cs5_groups[] = { -+ "gpio17", -+}; -+ -+static const char * const hsspi_cs6_groups[] = { -+ "gpio8", -+}; -+ -+static const char * const hsspi_cs7_groups[] = { -+ "gpio9", -+}; -+ -+static const char * const uart1_scts_groups[] = { -+ "gpio10", -+ "gpio24", -+}; -+ -+static const char * const uart1_srts_groups[] = { -+ "gpio11", -+ "gpio25", -+}; -+ -+static const char * const uart1_sdin_groups[] = { -+ "gpio12", -+ "gpio26", -+}; -+ -+static const char * const uart1_sdout_groups[] = { -+ "gpio13", -+ "gpio27", -+}; -+ -+static const char * const ntr_pulse_in_groups[] = { -+ "gpio14", -+ "gpio28", -+}; -+ -+static const char * const dsl_ntr_pulse_out_groups[] = { -+ "gpio15", -+ "gpio29", -+}; -+ -+static const char * const adsl_spi_miso_groups[] = { -+ "gpio18", -+}; -+ -+static const char * const adsl_spi_mosi_groups[] = { -+ "gpio19", -+}; -+ -+static const char * const vreg_clk_groups[] = { -+ "gpio22", -+}; -+ -+static const char * const pcie_clkreq_b_groups[] = { -+ "gpio23", -+}; -+ -+static const char * const switch_led_clk_groups[] = { -+ "gpio30", -+}; -+ -+static const char * const switch_led_data_groups[] = { -+ "gpio31", -+}; -+ -+static const char * const wifi_groups[] = { -+ "gpio32", -+ "gpio33", -+ "gpio34", -+ "gpio35", -+ "gpio36", -+ "gpio37", -+ "gpio38", -+ "gpio39", -+ "gpio40", -+ "gpio41", -+ "gpio42", -+ "gpio43", -+ "gpio44", -+ "gpio45", -+ "gpio46", -+ "gpio47", -+ "gpio48", -+ "gpio49", -+ "gpio50", -+ "gpio51", -+}; -+ -+static const char * const nand_groups[] = { -+ "nand_grp", -+}; -+ -+static const char * const dectpd_groups[] = { -+ "dectpd_grp", -+}; -+ -+static const char * const vdsl_phy_override_0_groups[] = { -+ "vdsl_phy_override_0_grp", -+}; -+ -+static const char * const vdsl_phy_override_1_groups[] = { -+ "vdsl_phy_override_1_grp", -+}; -+ -+static const char * const vdsl_phy_override_2_groups[] = { -+ "vdsl_phy_override_2_grp", -+}; -+ -+static const char * const vdsl_phy_override_3_groups[] = { -+ "vdsl_phy_override_3_grp", -+}; -+ -+#define BCM63268_LED_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM63268_LEDCTRL, \ -+ } -+ -+#define BCM63268_MODE_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM63268_MODE, \ -+ } -+ -+#define BCM63268_CTRL_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM63268_CTRL, \ -+ } -+ -+#define BCM63268_BASEMODE_FUN(n, val) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM63268_BASEMODE, \ -+ .mask = val, \ -+ } -+ -+static const struct bcm63268_function bcm63268_funcs[] = { -+ BCM63268_LED_FUN(led), -+ BCM63268_MODE_FUN(serial_led_clk), -+ BCM63268_MODE_FUN(serial_led_data), -+ BCM63268_MODE_FUN(hsspi_cs6), -+ BCM63268_MODE_FUN(hsspi_cs7), -+ BCM63268_MODE_FUN(uart1_scts), -+ BCM63268_MODE_FUN(uart1_srts), -+ BCM63268_MODE_FUN(uart1_sdin), -+ BCM63268_MODE_FUN(uart1_sdout), -+ BCM63268_MODE_FUN(ntr_pulse_in), -+ BCM63268_MODE_FUN(dsl_ntr_pulse_out), -+ BCM63268_MODE_FUN(hsspi_cs4), -+ BCM63268_MODE_FUN(hsspi_cs5), -+ BCM63268_MODE_FUN(adsl_spi_miso), -+ BCM63268_MODE_FUN(adsl_spi_mosi), -+ BCM63268_MODE_FUN(vreg_clk), -+ BCM63268_MODE_FUN(pcie_clkreq_b), -+ BCM63268_MODE_FUN(switch_led_clk), -+ BCM63268_MODE_FUN(switch_led_data), -+ BCM63268_CTRL_FUN(wifi), -+ BCM63268_BASEMODE_FUN(nand, BCM63268_BASEMODE_NAND), -+ BCM63268_BASEMODE_FUN(dectpd, BCM63268_BASEMODE_DECTPD), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_0, -+ BCM63268_BASEMODE_VDSL_PHY_0), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_1, -+ BCM63268_BASEMODE_VDSL_PHY_1), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_2, -+ BCM63268_BASEMODE_VDSL_PHY_2), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_3, -+ BCM63268_BASEMODE_VDSL_PHY_3), -+}; -+ -+static inline unsigned int bcm63268_bank_pin(unsigned int pin) -+{ -+ return pin % PINS_PER_BANK; -+} -+ -+static inline unsigned int bcm63268_reg_off(unsigned int reg, unsigned int pin) -+{ -+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; -+} -+ -+static int bcm63268_gpio_direction_input(struct gpio_chip *chip, -+ unsigned int pin) -+{ -+ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm63268_reg_off(BCM63268_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm63268_bank_pin(pin); -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an input GPIO -+ */ -+ ret = pinctrl_gpio_direction_input(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); -+ -+ return 0; -+} -+ -+static int bcm63268_gpio_direction_output(struct gpio_chip *chip, -+ unsigned int pin, int value) -+{ -+ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm63268_reg_off(BCM63268_DATA_REG, pin); -+ unsigned int dirout = bcm63268_reg_off(BCM63268_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm63268_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an output GPIO -+ */ -+ ret = pinctrl_gpio_direction_output(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+ -+ return 0; -+} -+ -+static int bcm63268_gpio_get(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm63268_reg_off(BCM63268_DATA_REG, pin); -+ unsigned int bank_pin = bcm63268_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, data, &val); -+ -+ return !!(val & BIT(bank_pin)); -+} -+ -+static int bcm63268_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm63268_reg_off(BCM63268_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm63268_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, dirout, &val); -+ -+ if (val & BIT(bank_pin)) -+ return GPIO_LINE_DIRECTION_OUT; -+ -+ return GPIO_LINE_DIRECTION_IN; -+} -+ -+static void bcm63268_gpio_set(struct gpio_chip *chip, unsigned int pin, -+ int value) -+{ -+ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm63268_reg_off(BCM63268_DATA_REG, pin); -+ unsigned int bank_pin = bcm63268_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+} -+ -+static int bcm63268_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ char irq_name[7]; -+ -+ sprintf(irq_name, "gpio%d", gpio); -+ -+ return of_irq_get_byname(chip->of_node, irq_name); -+} -+ -+static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm63268_groups); -+} -+ -+static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm63268_groups[group].name; -+} -+ -+static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, -+ const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm63268_groups[group].pins; -+ *num_pins = bcm63268_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm63268_funcs); -+} -+ -+static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm63268_funcs[selector].name; -+} -+ -+static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm63268_funcs[selector].groups; -+ *num_groups = bcm63268_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static void bcm63268_set_gpio(struct bcm63268_pinctrl *pc, unsigned pin) -+{ -+ const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin]; -+ unsigned int basemode = (unsigned long) desc->drv_data; -+ unsigned int mask = BIT(bcm63268_bank_pin(pin)); -+ -+ if (basemode) -+ regmap_update_bits(pc->regs, BCM63268_BASEMODE_REG, basemode, -+ 0); -+ -+ if (pin < PINS_PER_BANK) { -+ /* base mode: 0 => gpio, 1 => mux function */ -+ regmap_update_bits(pc->regs, BCM63268_MODE_REG, mask, 0); -+ -+ /* pins 0-23 might be muxed to led */ -+ if (pin < BCM63268_NUM_LEDS) -+ regmap_update_bits(pc->regs, BCM63268_LED_REG, mask, -+ 0); -+ } else if (pin < BCM63268_NUM_GPIOS) { -+ /* ctrl reg: 0 => wifi function, 1 => gpio */ -+ regmap_update_bits(pc->regs, BCM63268_CTRL_REG, mask, mask); -+ } -+} -+ -+static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm63268_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm63268_pingroup *pg = &bcm63268_groups[group]; -+ const struct bcm63268_function *f = &bcm63268_funcs[selector]; -+ unsigned i; -+ unsigned int reg; -+ unsigned int val, mask; -+ -+ for (i = 0; i < pg->num_pins; i++) -+ bcm63268_set_gpio(pc, pg->pins[i]); -+ -+ switch (f->reg) { -+ case BCM63268_LEDCTRL: -+ reg = BCM63268_LED_REG; -+ mask = BIT(pg->pins[0]); -+ val = BIT(pg->pins[0]); -+ break; -+ case BCM63268_MODE: -+ reg = BCM63268_MODE_REG; -+ mask = BIT(pg->pins[0]); -+ val = BIT(pg->pins[0]); -+ break; -+ case BCM63268_CTRL: -+ reg = BCM63268_CTRL_REG; -+ mask = BIT(pg->pins[0]); -+ val = 0; -+ break; -+ case BCM63268_BASEMODE: -+ reg = BCM63268_BASEMODE_REG; -+ mask = f->mask; -+ val = f->mask; -+ break; -+ default: -+ WARN_ON(1); -+ return -EINVAL; -+ } -+ -+ regmap_update_bits(pc->regs, reg, mask, val); -+ -+ return 0; -+} -+ -+static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm63268_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ -+ /* disable all functions using this pin */ -+ bcm63268_set_gpio(pc, offset); -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm63268_pctl_ops = { -+ .get_groups_count = bcm63268_pinctrl_get_group_count, -+ .get_group_name = bcm63268_pinctrl_get_group_name, -+ .get_group_pins = bcm63268_pinctrl_get_group_pins, -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+}; -+ -+static struct pinmux_ops bcm63268_pmx_ops = { -+ .get_functions_count = bcm63268_pinctrl_get_func_count, -+ .get_function_name = bcm63268_pinctrl_get_func_name, -+ .get_function_groups = bcm63268_pinctrl_get_groups, -+ .set_mux = bcm63268_pinctrl_set_mux, -+ .gpio_request_enable = bcm63268_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm63268_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct bcm63268_pinctrl *pc; -+ int err; -+ -+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); -+ if (!pc) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, pc); -+ pc->dev = dev; -+ -+ pc->regs = syscon_node_to_regmap(dev->parent->of_node); -+ if (IS_ERR(pc->regs)) -+ return PTR_ERR(pc->regs); -+ -+ pc->gpio_chip.label = MODULE_NAME; -+ pc->gpio_chip.owner = THIS_MODULE; -+ pc->gpio_chip.request = gpiochip_generic_request; -+ pc->gpio_chip.free = gpiochip_generic_free; -+ pc->gpio_chip.direction_input = bcm63268_gpio_direction_input; -+ pc->gpio_chip.direction_output = bcm63268_gpio_direction_output; -+ pc->gpio_chip.get_direction = bcm63268_gpio_get_direction; -+ pc->gpio_chip.get = bcm63268_gpio_get; -+ pc->gpio_chip.set = bcm63268_gpio_set; -+ pc->gpio_chip.set_config = gpiochip_generic_config; -+ pc->gpio_chip.base = -1; -+ pc->gpio_chip.ngpio = BCM63268_NUM_GPIOS; -+ pc->gpio_chip.can_sleep = false; -+ pc->gpio_chip.parent = dev; -+ pc->gpio_chip.of_node = np; -+ -+ if (of_get_property(np, "interrupt-names", NULL)) -+ pc->gpio_chip.to_irq = bcm63268_gpio_to_irq; -+ -+ err = gpiochip_add_data(&pc->gpio_chip, pc); -+ if (err) { -+ dev_err(dev, "could not add GPIO chip\n"); -+ return err; -+ } -+ -+ pc->pctl_desc.name = MODULE_NAME, -+ pc->pctl_desc.pins = bcm63268_pins, -+ pc->pctl_desc.npins = ARRAY_SIZE(bcm63268_pins), -+ pc->pctl_desc.pctlops = &bcm63268_pctl_ops, -+ pc->pctl_desc.pmxops = &bcm63268_pmx_ops, -+ pc->pctl_desc.owner = THIS_MODULE, -+ -+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); -+ if (IS_ERR(pc->pctl_dev)) { -+ gpiochip_remove(&pc->gpio_chip); -+ return PTR_ERR(pc->pctl_dev); -+ } -+ -+ pc->gpio_range.name = MODULE_NAME; -+ pc->gpio_range.npins = BCM63268_NUM_GPIOS; -+ pc->gpio_range.base = pc->gpio_chip.base; -+ pc->gpio_range.gc = &pc->gpio_chip; -+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); -+ -+ dev_info(dev, "registered\n"); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm63268_pinctrl_match[] = { -+ { .compatible = "brcm,bcm63268-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm63268_pinctrl_driver = { -+ .probe = bcm63268_pinctrl_probe, -+ .driver = { -+ .name = MODULE_NAME, -+ .of_match_table = bcm63268_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm63268_pinctrl_driver); diff --git a/target/linux/bmips/patches-5.10/410-Documentation-add-BCM6318-pincontroller-binding-docu.patch b/target/linux/bmips/patches-5.10/410-Documentation-add-BCM6318-pincontroller-binding-docu.patch deleted file mode 100644 index 6577038756..0000000000 --- a/target/linux/bmips/patches-5.10/410-Documentation-add-BCM6318-pincontroller-binding-docu.patch +++ /dev/null @@ -1,194 +0,0 @@ -From f909bf5d5cf3db6b35c082f27f7982dfcb1447c2 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Wed, 27 Jul 2016 11:38:05 +0200 -Subject: [PATCH 11/12] Documentation: add BCM6318 pincontroller binding - documentation -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add binding documentation for the pincontrol core found in BCM6318 SoCs. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - .../pinctrl/brcm,bcm6318-pinctrl.yaml | 173 ++++++++++++++++++ - 1 file changed, 173 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml -@@ -0,0 +1,173 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Broadcom BCM6318 pin controller -+ -+maintainers: -+ - Álvaro Fernández Rojas -+ - Jonas Gorski -+ -+description: |+ -+ The pin controller node should be the child of a syscon node. -+ -+ Refer to the the bindings described in -+ Documentation/devicetree/bindings/mfd/syscon.yaml -+ -+properties: -+ compatible: -+ const: brcm,bcm6318-pinctrl -+ -+ gpio-controller: true -+ -+ '#gpio-cells': -+ description: -+ Specifies the pin number and flags, as defined in -+ include/dt-bindings/gpio/gpio.h -+ const: 2 -+ -+ interrupts-extended: -+ description: -+ One interrupt per each of the 2 GPIO ports supported by the controller, -+ sorted by port number ascending order. -+ minItems: 2 -+ maxItems: 2 -+ -+patternProperties: -+ '^.*$': -+ if: -+ type: object -+ then: -+ properties: -+ function: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led, -+ ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led, -+ serial_led_data, serial_led_clk, inet_act_led, inet_fail_led, -+ dsl_led, post_fail_led, wlan_wps_led, usb_pwron, -+ usb_device_led, usb_active ] -+ -+ pins: -+ $ref: "/schemas/types.yaml#/definitions/string" -+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, -+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ] -+ -+required: -+ - compatible -+ - gpio-controller -+ - '#gpio-cells' -+ -+additionalProperties: false -+ -+examples: -+ - | -+ gpio@10000080 { -+ compatible = "syscon", "simple-mfd"; -+ reg = <0x10000080 0x80>; -+ -+ pinctrl: pinctrl { -+ compatible = "brcm,bcm6318-pinctrl"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ interrupts-extended = <&ext_intc 0 0>, -+ <&ext_intc 1 0>; -+ interrupt-names = "gpio33", -+ "gpio34"; -+ -+ pinctrl_ephy0_spd_led: ephy0_spd_led { -+ function = "ephy0_spd_led"; -+ pins = "gpio0"; -+ }; -+ -+ pinctrl_ephy1_spd_led: ephy1_spd_led { -+ function = "ephy1_spd_led"; -+ pins = "gpio1"; -+ }; -+ -+ pinctrl_ephy2_spd_led: ephy2_spd_led { -+ function = "ephy2_spd_led"; -+ pins = "gpio2"; -+ }; -+ -+ pinctrl_ephy3_spd_led: ephy3_spd_led { -+ function = "ephy3_spd_led"; -+ pins = "gpio3"; -+ }; -+ -+ pinctrl_ephy0_act_led: ephy0_act_led { -+ function = "ephy0_act_led"; -+ pins = "gpio4"; -+ }; -+ -+ pinctrl_ephy1_act_led: ephy1_act_led { -+ function = "ephy1_act_led"; -+ pins = "gpio5"; -+ }; -+ -+ pinctrl_ephy2_act_led: ephy2_act_led { -+ function = "ephy2_act_led"; -+ pins = "gpio6"; -+ }; -+ -+ pinctrl_ephy3_act_led: ephy3_act_led { -+ function = "ephy3_act_led"; -+ pins = "gpio7"; -+ }; -+ -+ pinctrl_serial_led: serial_led { -+ pinctrl_serial_led_data: serial_led_data { -+ function = "serial_led_data"; -+ pins = "gpio6"; -+ }; -+ -+ pinctrl_serial_led_clk: serial_led_clk { -+ function = "serial_led_clk"; -+ pins = "gpio7"; -+ }; -+ }; -+ -+ pinctrl_inet_act_led: inet_act_led { -+ function = "inet_act_led"; -+ pins = "gpio8"; -+ }; -+ -+ pinctrl_inet_fail_led: inet_fail_led { -+ function = "inet_fail_led"; -+ pins = "gpio9"; -+ }; -+ -+ pinctrl_dsl_led: dsl_led { -+ function = "dsl_led"; -+ pins = "gpio10"; -+ }; -+ -+ pinctrl_post_fail_led: post_fail_led { -+ function = "post_fail_led"; -+ pins = "gpio11"; -+ }; -+ -+ pinctrl_wlan_wps_led: wlan_wps_led { -+ function = "wlan_wps_led"; -+ pins = "gpio12"; -+ }; -+ -+ pinctrl_usb_pwron: usb_pwron { -+ function = "usb_pwron"; -+ pins = "gpio13"; -+ }; -+ -+ pinctrl_usb_device_led: usb_device_led { -+ function = "usb_device_led"; -+ pins = "gpio13"; -+ }; -+ -+ pinctrl_usb_active: usb_active { -+ function = "usb_active"; -+ pins = "gpio40"; -+ }; -+ }; -+ }; diff --git a/target/linux/bmips/patches-5.10/411-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch b/target/linux/bmips/patches-5.10/411-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch deleted file mode 100644 index b57b49d35f..0000000000 --- a/target/linux/bmips/patches-5.10/411-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch +++ /dev/null @@ -1,729 +0,0 @@ -From e1764f96eb563a11c822ff91d1c6d7ed01c3925b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Fri, 24 Jun 2016 22:20:39 +0200 -Subject: [PATCH 12/12] pinctrl: add a pincontrol driver for BCM6318 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs -to different functions. BCM6318 is similar to BCM6328 with the addition -of a pad register, and the GPIO meaning of the mux register changes -based on the GPIO number. - -Signed-off-by: Álvaro Fernández Rojas -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm/Kconfig | 11 + - drivers/pinctrl/bcm/Makefile | 1 + - drivers/pinctrl/bcm/pinctrl-bcm6318.c | 674 ++++++++++++++++++++++++++ - 3 files changed, 686 insertions(+) - create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6318.c - ---- a/drivers/pinctrl/bcm/Kconfig -+++ b/drivers/pinctrl/bcm/Kconfig -@@ -29,6 +29,17 @@ config PINCTRL_BCM2835 - help - Say Y here to enable the Broadcom BCM2835 GPIO driver. - -+config PINCTRL_BCM6318 -+ bool "Broadcom BCM6318 GPIO driver" -+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) -+ select PINMUX -+ select PINCONF -+ select GENERIC_PINCONF -+ select MFD_SYSCON -+ default BMIPS_GENERIC -+ help -+ Say Y here to enable the Broadcom BCM6318 GPIO driver. -+ - config PINCTRL_BCM6328 - bool "Broadcom BCM6328 GPIO driver" - depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST) ---- a/drivers/pinctrl/bcm/Makefile -+++ b/drivers/pinctrl/bcm/Makefile -@@ -3,6 +3,7 @@ - - obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o - obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o -+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o - obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o ---- /dev/null -+++ b/drivers/pinctrl/bcm/pinctrl-bcm6318.c -@@ -0,0 +1,674 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Driver for BCM6318 GPIO unit (pinctrl + GPIO) -+ * -+ * Copyright (C) 2021 Álvaro Fernández Rojas -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#define MODULE_NAME "bcm6318-pinctrl" -+#define BCM6318_NUM_GPIOS 50 -+#define BCM6318_NUM_MUX 48 -+ -+#define BANK_SIZE sizeof(uint32_t) -+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) -+ -+#define BCM6318_DIROUT_REG 0x04 -+#define BCM6318_DATA_REG 0x0c -+#define BCM6318_MODE_REG 0x18 -+#define BCM6318_MUX_REG 0x1c -+#define BCM6318_PAD_REG 0x54 -+ -+struct bcm6318_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm6318_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ -+ unsigned mode_val:1; -+ unsigned mux_val:2; -+}; -+ -+struct bcm6318_pinctrl { -+ struct device *dev; -+ struct regmap *regs; -+ -+ struct pinctrl_dev *pctl_dev; -+ struct gpio_chip gpio_chip; -+ struct pinctrl_desc pctl_desc; -+ struct pinctrl_gpio_range gpio_range; -+}; -+ -+static const struct pinctrl_pin_desc bcm6318_pins[] = { -+ PINCTRL_PIN(0, "gpio0"), -+ PINCTRL_PIN(1, "gpio1"), -+ PINCTRL_PIN(2, "gpio2"), -+ PINCTRL_PIN(3, "gpio3"), -+ PINCTRL_PIN(4, "gpio4"), -+ PINCTRL_PIN(5, "gpio5"), -+ PINCTRL_PIN(6, "gpio6"), -+ PINCTRL_PIN(7, "gpio7"), -+ PINCTRL_PIN(8, "gpio8"), -+ PINCTRL_PIN(9, "gpio9"), -+ PINCTRL_PIN(10, "gpio10"), -+ PINCTRL_PIN(11, "gpio11"), -+ PINCTRL_PIN(12, "gpio12"), -+ PINCTRL_PIN(13, "gpio13"), -+ PINCTRL_PIN(14, "gpio14"), -+ PINCTRL_PIN(15, "gpio15"), -+ PINCTRL_PIN(16, "gpio16"), -+ PINCTRL_PIN(17, "gpio17"), -+ PINCTRL_PIN(18, "gpio18"), -+ PINCTRL_PIN(19, "gpio19"), -+ PINCTRL_PIN(20, "gpio20"), -+ PINCTRL_PIN(21, "gpio21"), -+ PINCTRL_PIN(22, "gpio22"), -+ PINCTRL_PIN(23, "gpio23"), -+ PINCTRL_PIN(24, "gpio24"), -+ PINCTRL_PIN(25, "gpio25"), -+ PINCTRL_PIN(26, "gpio26"), -+ PINCTRL_PIN(27, "gpio27"), -+ PINCTRL_PIN(28, "gpio28"), -+ PINCTRL_PIN(29, "gpio29"), -+ PINCTRL_PIN(30, "gpio30"), -+ PINCTRL_PIN(31, "gpio31"), -+ PINCTRL_PIN(32, "gpio32"), -+ PINCTRL_PIN(33, "gpio33"), -+ PINCTRL_PIN(34, "gpio34"), -+ PINCTRL_PIN(35, "gpio35"), -+ PINCTRL_PIN(36, "gpio36"), -+ PINCTRL_PIN(37, "gpio37"), -+ PINCTRL_PIN(38, "gpio38"), -+ PINCTRL_PIN(39, "gpio39"), -+ PINCTRL_PIN(40, "gpio40"), -+ PINCTRL_PIN(41, "gpio41"), -+ PINCTRL_PIN(42, "gpio42"), -+ PINCTRL_PIN(43, "gpio43"), -+ PINCTRL_PIN(44, "gpio44"), -+ PINCTRL_PIN(45, "gpio45"), -+ PINCTRL_PIN(46, "gpio46"), -+ PINCTRL_PIN(47, "gpio47"), -+ PINCTRL_PIN(48, "gpio48"), -+ PINCTRL_PIN(49, "gpio49"), -+}; -+ -+static unsigned gpio0_pins[] = { 0 }; -+static unsigned gpio1_pins[] = { 1 }; -+static unsigned gpio2_pins[] = { 2 }; -+static unsigned gpio3_pins[] = { 3 }; -+static unsigned gpio4_pins[] = { 4 }; -+static unsigned gpio5_pins[] = { 5 }; -+static unsigned gpio6_pins[] = { 6 }; -+static unsigned gpio7_pins[] = { 7 }; -+static unsigned gpio8_pins[] = { 8 }; -+static unsigned gpio9_pins[] = { 9 }; -+static unsigned gpio10_pins[] = { 10 }; -+static unsigned gpio11_pins[] = { 11 }; -+static unsigned gpio12_pins[] = { 12 }; -+static unsigned gpio13_pins[] = { 13 }; -+static unsigned gpio14_pins[] = { 14 }; -+static unsigned gpio15_pins[] = { 15 }; -+static unsigned gpio16_pins[] = { 16 }; -+static unsigned gpio17_pins[] = { 17 }; -+static unsigned gpio18_pins[] = { 18 }; -+static unsigned gpio19_pins[] = { 19 }; -+static unsigned gpio20_pins[] = { 20 }; -+static unsigned gpio21_pins[] = { 21 }; -+static unsigned gpio22_pins[] = { 22 }; -+static unsigned gpio23_pins[] = { 23 }; -+static unsigned gpio24_pins[] = { 24 }; -+static unsigned gpio25_pins[] = { 25 }; -+static unsigned gpio26_pins[] = { 26 }; -+static unsigned gpio27_pins[] = { 27 }; -+static unsigned gpio28_pins[] = { 28 }; -+static unsigned gpio29_pins[] = { 29 }; -+static unsigned gpio30_pins[] = { 30 }; -+static unsigned gpio31_pins[] = { 31 }; -+static unsigned gpio32_pins[] = { 32 }; -+static unsigned gpio33_pins[] = { 33 }; -+static unsigned gpio34_pins[] = { 34 }; -+static unsigned gpio35_pins[] = { 35 }; -+static unsigned gpio36_pins[] = { 36 }; -+static unsigned gpio37_pins[] = { 37 }; -+static unsigned gpio38_pins[] = { 38 }; -+static unsigned gpio39_pins[] = { 39 }; -+static unsigned gpio40_pins[] = { 40 }; -+static unsigned gpio41_pins[] = { 41 }; -+static unsigned gpio42_pins[] = { 42 }; -+static unsigned gpio43_pins[] = { 43 }; -+static unsigned gpio44_pins[] = { 44 }; -+static unsigned gpio45_pins[] = { 45 }; -+static unsigned gpio46_pins[] = { 46 }; -+static unsigned gpio47_pins[] = { 47 }; -+static unsigned gpio48_pins[] = { 48 }; -+static unsigned gpio49_pins[] = { 49 }; -+ -+#define BCM6318_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } -+ -+static struct bcm6318_pingroup bcm6318_groups[] = { -+ BCM6318_GROUP(gpio0), -+ BCM6318_GROUP(gpio1), -+ BCM6318_GROUP(gpio2), -+ BCM6318_GROUP(gpio3), -+ BCM6318_GROUP(gpio4), -+ BCM6318_GROUP(gpio5), -+ BCM6318_GROUP(gpio6), -+ BCM6318_GROUP(gpio7), -+ BCM6318_GROUP(gpio8), -+ BCM6318_GROUP(gpio9), -+ BCM6318_GROUP(gpio10), -+ BCM6318_GROUP(gpio11), -+ BCM6318_GROUP(gpio12), -+ BCM6318_GROUP(gpio13), -+ BCM6318_GROUP(gpio14), -+ BCM6318_GROUP(gpio15), -+ BCM6318_GROUP(gpio16), -+ BCM6318_GROUP(gpio17), -+ BCM6318_GROUP(gpio18), -+ BCM6318_GROUP(gpio19), -+ BCM6318_GROUP(gpio20), -+ BCM6318_GROUP(gpio21), -+ BCM6318_GROUP(gpio22), -+ BCM6318_GROUP(gpio23), -+ BCM6318_GROUP(gpio24), -+ BCM6318_GROUP(gpio25), -+ BCM6318_GROUP(gpio26), -+ BCM6318_GROUP(gpio27), -+ BCM6318_GROUP(gpio28), -+ BCM6318_GROUP(gpio29), -+ BCM6318_GROUP(gpio30), -+ BCM6318_GROUP(gpio31), -+ BCM6318_GROUP(gpio32), -+ BCM6318_GROUP(gpio33), -+ BCM6318_GROUP(gpio34), -+ BCM6318_GROUP(gpio35), -+ BCM6318_GROUP(gpio36), -+ BCM6318_GROUP(gpio37), -+ BCM6318_GROUP(gpio38), -+ BCM6318_GROUP(gpio39), -+ BCM6318_GROUP(gpio40), -+ BCM6318_GROUP(gpio41), -+ BCM6318_GROUP(gpio42), -+ BCM6318_GROUP(gpio43), -+ BCM6318_GROUP(gpio44), -+ BCM6318_GROUP(gpio45), -+ BCM6318_GROUP(gpio46), -+ BCM6318_GROUP(gpio47), -+ BCM6318_GROUP(gpio48), -+ BCM6318_GROUP(gpio49), -+}; -+ -+/* GPIO_MODE */ -+static const char * const led_groups[] = { -+ "gpio0", -+ "gpio1", -+ "gpio2", -+ "gpio3", -+ "gpio4", -+ "gpio5", -+ "gpio6", -+ "gpio7", -+ "gpio8", -+ "gpio9", -+ "gpio10", -+ "gpio11", -+ "gpio12", -+ "gpio13", -+ "gpio14", -+ "gpio15", -+ "gpio16", -+ "gpio17", -+ "gpio18", -+ "gpio19", -+ "gpio20", -+ "gpio21", -+ "gpio22", -+ "gpio23", -+}; -+ -+/* PINMUX_SEL */ -+static const char * const ephy0_spd_led_groups[] = { -+ "gpio0", -+}; -+ -+static const char * const ephy1_spd_led_groups[] = { -+ "gpio1", -+}; -+ -+static const char * const ephy2_spd_led_groups[] = { -+ "gpio2", -+}; -+ -+static const char * const ephy3_spd_led_groups[] = { -+ "gpio3", -+}; -+ -+static const char * const ephy0_act_led_groups[] = { -+ "gpio4", -+}; -+ -+static const char * const ephy1_act_led_groups[] = { -+ "gpio5", -+}; -+ -+static const char * const ephy2_act_led_groups[] = { -+ "gpio6", -+}; -+ -+static const char * const ephy3_act_led_groups[] = { -+ "gpio7", -+}; -+ -+static const char * const serial_led_data_groups[] = { -+ "gpio6", -+}; -+ -+static const char * const serial_led_clk_groups[] = { -+ "gpio7", -+}; -+ -+static const char * const inet_act_led_groups[] = { -+ "gpio8", -+}; -+ -+static const char * const inet_fail_led_groups[] = { -+ "gpio9", -+}; -+ -+static const char * const dsl_led_groups[] = { -+ "gpio10", -+}; -+ -+static const char * const post_fail_led_groups[] = { -+ "gpio11", -+}; -+ -+static const char * const wlan_wps_led_groups[] = { -+ "gpio12", -+}; -+ -+static const char * const usb_pwron_groups[] = { -+ "gpio13", -+}; -+ -+static const char * const usb_device_led_groups[] = { -+ "gpio13", -+}; -+ -+static const char * const usb_active_groups[] = { -+ "gpio40", -+}; -+ -+#define BCM6318_MODE_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .mode_val = 1, \ -+ } -+ -+#define BCM6318_MUX_FUN(n, mux) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .mux_val = mux, \ -+ } -+ -+static const struct bcm6318_function bcm6318_funcs[] = { -+ BCM6318_MODE_FUN(led), -+ BCM6318_MUX_FUN(ephy0_spd_led, 1), -+ BCM6318_MUX_FUN(ephy1_spd_led, 1), -+ BCM6318_MUX_FUN(ephy2_spd_led, 1), -+ BCM6318_MUX_FUN(ephy3_spd_led, 1), -+ BCM6318_MUX_FUN(ephy0_act_led, 1), -+ BCM6318_MUX_FUN(ephy1_act_led, 1), -+ BCM6318_MUX_FUN(ephy2_act_led, 1), -+ BCM6318_MUX_FUN(ephy3_act_led, 1), -+ BCM6318_MUX_FUN(serial_led_data, 3), -+ BCM6318_MUX_FUN(serial_led_clk, 3), -+ BCM6318_MUX_FUN(inet_act_led, 1), -+ BCM6318_MUX_FUN(inet_fail_led, 1), -+ BCM6318_MUX_FUN(dsl_led, 1), -+ BCM6318_MUX_FUN(post_fail_led, 1), -+ BCM6318_MUX_FUN(wlan_wps_led, 1), -+ BCM6318_MUX_FUN(usb_pwron, 1), -+ BCM6318_MUX_FUN(usb_device_led, 2), -+ BCM6318_MUX_FUN(usb_active, 2), -+}; -+ -+static inline unsigned int bcm6318_bank_pin(unsigned int pin) -+{ -+ return pin % PINS_PER_BANK; -+} -+ -+static inline unsigned int bcm6318_mux_off(unsigned int pin) -+{ -+ return BCM6318_MUX_REG + (pin / 16) * BANK_SIZE; -+} -+ -+static inline unsigned int bcm6318_pad_off(unsigned int pin) -+{ -+ return BCM6318_PAD_REG + (pin / 8) * BANK_SIZE; -+} -+ -+static inline unsigned int bcm6318_reg_off(unsigned int reg, unsigned int pin) -+{ -+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE; -+} -+ -+static int bcm6318_gpio_direction_input(struct gpio_chip *chip, -+ unsigned int pin) -+{ -+ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm6318_reg_off(BCM6318_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6318_bank_pin(pin); -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an input GPIO -+ */ -+ ret = pinctrl_gpio_direction_input(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0); -+ -+ return 0; -+} -+ -+static int bcm6318_gpio_direction_output(struct gpio_chip *chip, -+ unsigned int pin, int value) -+{ -+ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6318_reg_off(BCM6318_DATA_REG, pin); -+ unsigned int dirout = bcm6318_reg_off(BCM6318_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6318_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ int ret; -+ -+ /* -+ * Check with the pinctrl driver whether this pin is usable as -+ * an output GPIO -+ */ -+ ret = pinctrl_gpio_direction_output(chip->base + pin); -+ if (ret) -+ return ret; -+ -+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin)); -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+ -+ return 0; -+} -+ -+static int bcm6318_gpio_get(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6318_reg_off(BCM6318_DATA_REG, pin); -+ unsigned int bank_pin = bcm6318_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, data, &val); -+ -+ return !!(val & BIT(bank_pin)); -+} -+ -+static int bcm6318_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) -+{ -+ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int dirout = bcm6318_reg_off(BCM6318_DIROUT_REG, pin); -+ unsigned int bank_pin = bcm6318_bank_pin(pin); -+ unsigned int val; -+ -+ regmap_read(pc->regs, dirout, &val); -+ -+ if (val & BIT(bank_pin)) -+ return GPIO_LINE_DIRECTION_OUT; -+ -+ return GPIO_LINE_DIRECTION_IN; -+} -+ -+static void bcm6318_gpio_set(struct gpio_chip *chip, unsigned int pin, -+ int value) -+{ -+ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip); -+ unsigned int data = bcm6318_reg_off(BCM6318_DATA_REG, pin); -+ unsigned int bank_pin = bcm6318_bank_pin(pin); -+ unsigned int val = value ? BIT(bank_pin) : 0; -+ -+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val); -+} -+ -+static int bcm6318_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ char irq_name[7]; -+ -+ sprintf(irq_name, "gpio%d", gpio); -+ -+ return of_irq_get_byname(chip->of_node, irq_name); -+} -+ -+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6318_groups); -+} -+ -+static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6318_groups[group].name; -+} -+ -+static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6318_groups[group].pins; -+ *num_pins = bcm6318_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6318_funcs); -+} -+ -+static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6318_funcs[selector].name; -+} -+ -+static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6318_funcs[selector].groups; -+ *num_groups = bcm6318_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static inline void bcm6318_rmw_mux(struct bcm6318_pinctrl *pc, unsigned pin, -+ unsigned int mode, unsigned int mux) -+{ -+ if (pin < PINS_PER_BANK) -+ regmap_update_bits(pc->regs, BCM6318_MODE_REG, BIT(pin), -+ mode ? BIT(pin) : 0); -+ -+ if (pin < BCM6318_NUM_MUX) -+ regmap_update_bits(pc->regs, -+ bcm6318_mux_off(pin), -+ 3UL << ((pin % 16) * 2), -+ mux << ((pin % 16) * 2)); -+} -+ -+static inline void bcm6318_set_pad(struct bcm6318_pinctrl *pc, unsigned pin, -+ uint8_t val) -+{ -+ regmap_update_bits(pc->regs, bcm6318_pad_off(pin), -+ 0xfUL << ((pin % 8) * 4), -+ val << ((pin % 8) * 4)); -+} -+ -+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6318_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6318_pingroup *pg = &bcm6318_groups[group]; -+ const struct bcm6318_function *f = &bcm6318_funcs[selector]; -+ -+ bcm6318_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val); -+ -+ return 0; -+} -+ -+static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6318_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ -+ /* disable all functions using this pin */ -+ if (offset < 13) { -+ /* GPIOs 0-12 use mux 0 as GPIO function */ -+ bcm6318_rmw_mux(pc, offset, 0, 0); -+ } else if (offset < 42) { -+ /* GPIOs 13-41 use mux 3 as GPIO function */ -+ bcm6318_rmw_mux(pc, offset, 0, 3); -+ -+ bcm6318_set_pad(pc, offset, 0); -+ } -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm6318_pctl_ops = { -+ .get_groups_count = bcm6318_pinctrl_get_group_count, -+ .get_group_name = bcm6318_pinctrl_get_group_name, -+ .get_group_pins = bcm6318_pinctrl_get_group_pins, -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+}; -+ -+static struct pinmux_ops bcm6318_pmx_ops = { -+ .get_functions_count = bcm6318_pinctrl_get_func_count, -+ .get_function_name = bcm6318_pinctrl_get_func_name, -+ .get_function_groups = bcm6318_pinctrl_get_groups, -+ .set_mux = bcm6318_pinctrl_set_mux, -+ .gpio_request_enable = bcm6318_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6318_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct bcm6318_pinctrl *pc; -+ int err; -+ -+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); -+ if (!pc) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, pc); -+ pc->dev = dev; -+ -+ pc->regs = syscon_node_to_regmap(dev->parent->of_node); -+ if (IS_ERR(pc->regs)) -+ return PTR_ERR(pc->regs); -+ -+ pc->gpio_chip.label = MODULE_NAME; -+ pc->gpio_chip.owner = THIS_MODULE; -+ pc->gpio_chip.request = gpiochip_generic_request; -+ pc->gpio_chip.free = gpiochip_generic_free; -+ pc->gpio_chip.direction_input = bcm6318_gpio_direction_input; -+ pc->gpio_chip.direction_output = bcm6318_gpio_direction_output; -+ pc->gpio_chip.get_direction = bcm6318_gpio_get_direction; -+ pc->gpio_chip.get = bcm6318_gpio_get; -+ pc->gpio_chip.set = bcm6318_gpio_set; -+ pc->gpio_chip.set_config = gpiochip_generic_config; -+ pc->gpio_chip.base = -1; -+ pc->gpio_chip.ngpio = BCM6318_NUM_GPIOS; -+ pc->gpio_chip.can_sleep = false; -+ pc->gpio_chip.parent = dev; -+ pc->gpio_chip.of_node = np; -+ -+ if (of_get_property(np, "interrupt-names", NULL)) -+ pc->gpio_chip.to_irq = bcm6318_gpio_to_irq; -+ -+ err = gpiochip_add_data(&pc->gpio_chip, pc); -+ if (err) { -+ dev_err(dev, "could not add GPIO chip\n"); -+ return err; -+ } -+ -+ pc->pctl_desc.name = MODULE_NAME, -+ pc->pctl_desc.pins = bcm6318_pins, -+ pc->pctl_desc.npins = ARRAY_SIZE(bcm6318_pins), -+ pc->pctl_desc.pctlops = &bcm6318_pctl_ops, -+ pc->pctl_desc.pmxops = &bcm6318_pmx_ops, -+ pc->pctl_desc.owner = THIS_MODULE, -+ -+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); -+ if (IS_ERR(pc->pctl_dev)) { -+ gpiochip_remove(&pc->gpio_chip); -+ return PTR_ERR(pc->pctl_dev); -+ } -+ -+ pc->gpio_range.name = MODULE_NAME; -+ pc->gpio_range.npins = BCM6318_NUM_GPIOS; -+ pc->gpio_range.base = pc->gpio_chip.base; -+ pc->gpio_range.gc = &pc->gpio_chip; -+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); -+ -+ dev_info(dev, "registered\n"); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6318_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6318-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6318_pinctrl_driver = { -+ .probe = bcm6318_pinctrl_probe, -+ .driver = { -+ .name = MODULE_NAME, -+ .of_match_table = bcm6318_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6318_pinctrl_driver);