From: Steffen Dirkwinkel Date: Wed, 17 Apr 2019 11:57:14 +0000 (+0200) Subject: dm: arm: imx: cx9020: enable DM_GPIO X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=08cc54f0719cccb27e18d4a09a64c52c84e1a72d;p=project%2Fbcm63xx%2Fu-boot.git dm: arm: imx: cx9020: enable DM_GPIO Switch to DM_GPIO and add gpio_request where necessary. This is needed for DM_VIDEO and fixes an issue with sd card detection which was introduced by the combination of these commits: commit 7a0425dd969c ("mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops") commit 7e04b4c751a1 ("dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC") Acked-by: Patrick Bruenn Signed-off-by: Steffen Dirkwinkel --- diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c index 79d8a62cf1..79ea456028 100644 --- a/board/beckhoff/mx53cx9020/mx53cx9020.c +++ b/board/beckhoff/mx53cx9020/mx53cx9020.c @@ -91,6 +91,9 @@ void weim_cs0_settings(u32 mode) static void setup_gpio_eim(void) { + gpio_request(GPIO_C3_STATUS, "GPIO_C3_STATUS"); + gpio_request(GPIO_C3_DONE, "GPIO_C3_DONE"); + gpio_request(GPIO_C3_CONFIG, "GPIO_C3_CONFIG"); gpio_direction_input(GPIO_C3_STATUS); gpio_direction_input(GPIO_C3_DONE); gpio_direction_output(GPIO_C3_CONFIG, 1); @@ -100,6 +103,7 @@ static void setup_gpio_eim(void) static void setup_gpio_sups(void) { + gpio_request(GPIO_SUPS_INT, "GPIO_SUPS_INT"); gpio_direction_input(GPIO_SUPS_INT); static const int BLINK_INTERVALL = 50000; @@ -116,6 +120,16 @@ static void setup_gpio_sups(void) static void setup_gpio_leds(void) { + gpio_request(GPIO_LED_SD2_R, "GPIO_LED_SD2_R"); + gpio_request(GPIO_LED_SD2_B, "GPIO_LED_SD2_B"); + gpio_request(GPIO_LED_SD2_G, "GPIO_LED_SD2_G"); + gpio_request(GPIO_LED_SD1_R, "GPIO_LED_SD1_R"); + gpio_request(GPIO_LED_SD1_B, "GPIO_LED_SD1_B"); + gpio_request(GPIO_LED_SD1_G, "GPIO_LED_SD1_G"); + gpio_request(GPIO_LED_PWR_R, "GPIO_LED_PWR_R"); + gpio_request(GPIO_LED_PWR_B, "GPIO_LED_PWR_B"); + gpio_request(GPIO_LED_PWR_G, "GPIO_LED_PWR_G"); + gpio_direction_output(GPIO_LED_SD2_R, 0); gpio_direction_output(GPIO_LED_SD2_B, 0); gpio_direction_output(GPIO_LED_SD2_G, 0); @@ -147,6 +161,8 @@ int board_mmc_getcd(struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; int ret; + gpio_request(GPIO_SD1_CD, "GPIO_SD1_CD"); + gpio_request(GPIO_SD2_CD, "GPIO_SD2_CD"); gpio_direction_input(GPIO_SD1_CD); gpio_direction_input(GPIO_SD2_CD); @@ -212,10 +228,6 @@ static void clock_1GHz(void) int board_early_init_f(void) { - setup_gpio_leds(); - setup_gpio_sups(); - setup_gpio_eim(); - setup_iomux_lcd(); return 0; } @@ -235,6 +247,11 @@ int board_init(void) mxc_set_sata_internal_clock(); + setup_gpio_leds(); + setup_gpio_sups(); + setup_gpio_eim(); + setup_iomux_lcd(); + return 0; } diff --git a/board/beckhoff/mx53cx9020/mx53cx9020_video.c b/board/beckhoff/mx53cx9020/mx53cx9020_video.c index 4055bccc2b..85f1cdae8a 100644 --- a/board/beckhoff/mx53cx9020/mx53cx9020_video.c +++ b/board/beckhoff/mx53cx9020/mx53cx9020_video.c @@ -36,6 +36,7 @@ void setup_iomux_lcd(void) { /* Turn on DVI_PWD */ imx_iomux_v3_setup_pad(MX53_PAD_CSI0_DAT15__GPIO6_1); + gpio_request(CX9020_DVI_PWD, "CX9020_DVI_PWD"); gpio_direction_output(CX9020_DVI_PWD, 1); } diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig index 90ea9a6b04..4f49fd20a2 100644 --- a/configs/mx53cx9020_defconfig +++ b/configs/mx53cx9020_defconfig @@ -24,7 +24,9 @@ CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020" CONFIG_ENV_IS_IN_MMC=y CONFIG_FPGA_ALTERA=y CONFIG_FPGA_CYCLON2=y +CONFIG_DM=y CONFIG_DM_MMC=y +CONFIG_DM_GPIO=y CONFIG_FSL_ESDHC=y CONFIG_FEC_MXC=y CONFIG_MII=y