From: Fabio Estevam <festevam@gmail.com>
Date: Fri, 3 May 2019 17:05:04 +0000 (-0300)
Subject: imx: Use a convenient default value for SYS_MALLOC_F_LEN
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=08919d381cf3d2adb2c2c15b9598767720ad3c7b;p=project%2Fbcm63xx%2Fu-boot.git

imx: Use a convenient default value for SYS_MALLOC_F_LEN

Commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
simple-bus driver") causes some i.MX boards that were converted
to DM, such as warp7, to fail to boot.

As explained by Lukas Auer:

"With the patch, U-Boot probes the drivers for devices under simple-bus
device tree nodes in the pre-relocation device model. The default value
of CONFIG_SYS_MALLOC_F_LEN (0x400) leaves U-Boot with not enough memory to
do this, causing it to hang."

Fix this problem by providing a convenient default value for
CONFIG_SYS_MALLOC_F_LEN.

Reported-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Suggested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Heiko Schocher <hs@denx.de>
---

diff --git a/Kconfig b/Kconfig
index a02168690f..9d83d1a22c 100644
--- a/Kconfig
+++ b/Kconfig
@@ -138,6 +138,8 @@ config SYS_MALLOC_F_LEN
 	depends on SYS_MALLOC_F
 	default 0x1000 if AM33XX
 	default 0x2800 if SANDBOX
+	default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
+			   ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5)
 	default 0x400
 	help
 	  Before relocation, memory is very limited on many platforms. Still,