From: Hauke Mehrtens Date: Tue, 25 Sep 2012 14:04:59 +0000 (+0000) Subject: activate failsafe on all ports of the switch and not just port 0. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=08181807151d68a7870bd611e31ab46ba58a240a;p=openwrt%2Fstaging%2Fyousong.git activate failsafe on all ports of the switch and not just port 0. Sometimes the port 0 was the WAN port or there could be some device where the port 0 is not wired to an actual Ethernet port. Now telnet in failsafe will listen on all ports of the switch so user do not have to search for the correct port any more. This change will make the switch leak traffic between the WAN and the LAN port, but you should not use failsafe while connected to a untrusted network. SVN-Revision: 33544 --- diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm index fdc7c71ca7..a0a3033465 100644 --- a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm +++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm @@ -31,7 +31,7 @@ preinit_net_echo() { port_net_echo $1 }; done - echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports + echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports } || port_net_echo $1 }