From: Rafał Miłecki Date: Tue, 10 Jan 2017 14:51:51 +0000 (+0100) Subject: mac80211: rename b43 patches to make more space X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=07df80a1a61504e2b79cfee5e138f1d38db8ea66;p=openwrt%2Fstaging%2Fynezz.git mac80211: rename b43 patches to make more space Just 6 patches were using 80*, 81*, 82* and 84* prefixes. Signed-off-by: Rafał Miłecki --- diff --git a/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch b/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch deleted file mode 100644 index fd9e6fd974..0000000000 --- a/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/drivers/net/wireless/broadcom/b43/b43.h -+++ b/drivers/net/wireless/broadcom/b43/b43.h -@@ -839,6 +839,7 @@ struct b43_wldev { - bool qos_enabled; /* TRUE, if QoS is used. */ - bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ - bool use_pio; /* TRUE if next init should use PIO */ -+ int gpiomask; /* GPIO LED mask as a module parameter */ - - /* PHY/Radio device. */ - struct b43_phy phy; ---- a/drivers/net/wireless/broadcom/b43/main.c -+++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -75,6 +75,11 @@ MODULE_FIRMWARE("b43/ucode16_mimo.fw"); - MODULE_FIRMWARE("b43/ucode5.fw"); - MODULE_FIRMWARE("b43/ucode9.fw"); - -+static int modparam_gpiomask = 0x000F; -+module_param_named(gpiomask, modparam_gpiomask, int, 0444); -+MODULE_PARM_DESC(gpiomask, -+ "GPIO mask for LED control (default 0x000F)"); -+ - static int modparam_bad_frames_preempt; - module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); - MODULE_PARM_DESC(bad_frames_preempt, -@@ -2882,10 +2887,10 @@ static int b43_gpio_init(struct b43_wlde - u32 mask, set; - - b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0); -- b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, 0xF); -+ b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, modparam_gpiomask); - - mask = 0x0000001F; -- set = 0x0000000F; -+ set = modparam_gpiomask; - if (dev->dev->chip_id == 0x4301) { - mask |= 0x0060; - set |= 0x0060; diff --git a/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch b/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch new file mode 100644 index 0000000000..fd9e6fd974 --- /dev/null +++ b/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch @@ -0,0 +1,37 @@ +--- a/drivers/net/wireless/broadcom/b43/b43.h ++++ b/drivers/net/wireless/broadcom/b43/b43.h +@@ -839,6 +839,7 @@ struct b43_wldev { + bool qos_enabled; /* TRUE, if QoS is used. */ + bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ + bool use_pio; /* TRUE if next init should use PIO */ ++ int gpiomask; /* GPIO LED mask as a module parameter */ + + /* PHY/Radio device. */ + struct b43_phy phy; +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -75,6 +75,11 @@ MODULE_FIRMWARE("b43/ucode16_mimo.fw"); + MODULE_FIRMWARE("b43/ucode5.fw"); + MODULE_FIRMWARE("b43/ucode9.fw"); + ++static int modparam_gpiomask = 0x000F; ++module_param_named(gpiomask, modparam_gpiomask, int, 0444); ++MODULE_PARM_DESC(gpiomask, ++ "GPIO mask for LED control (default 0x000F)"); ++ + static int modparam_bad_frames_preempt; + module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); + MODULE_PARM_DESC(bad_frames_preempt, +@@ -2882,10 +2887,10 @@ static int b43_gpio_init(struct b43_wlde + u32 mask, set; + + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0); +- b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, 0xF); ++ b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, modparam_gpiomask); + + mask = 0x0000001F; +- set = 0x0000000F; ++ set = modparam_gpiomask; + if (dev->dev->chip_id == 0x4301) { + mask |= 0x0060; + set |= 0x0060; diff --git a/package/kernel/mac80211/patches/810-b43_no_pio.patch b/package/kernel/mac80211/patches/810-b43_no_pio.patch deleted file mode 100644 index 79428c2784..0000000000 --- a/package/kernel/mac80211/patches/810-b43_no_pio.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/drivers/net/wireless/broadcom/b43/Makefile -+++ b/drivers/net/wireless/broadcom/b43/Makefile -@@ -17,7 +17,7 @@ b43-$(CPTCFG_B43_PHY_AC) += phy_ac.o - b43-y += sysfs.o - b43-y += xmit.o - b43-y += dma.o --b43-y += pio.o -+b43-$(CPTCFG_B43_PIO) += pio.o - b43-y += rfkill.o - b43-y += ppr.o - b43-$(CPTCFG_B43_LEDS) += leds.o ---- a/drivers/net/wireless/broadcom/b43/main.c -+++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -2008,10 +2008,12 @@ static void b43_do_interrupt_thread(stru - dma_reason[0], dma_reason[1], - dma_reason[2], dma_reason[3], - dma_reason[4], dma_reason[5]); -+#ifdef CPTCFG_B43_PIO - b43err(dev->wl, "This device does not support DMA " - "on your system. It will now be switched to PIO.\n"); - /* Fall back to PIO transfers if we get fatal DMA errors! */ - dev->use_pio = true; -+#endif - b43_controller_restart(dev, "DMA error"); - return; - } ---- a/drivers/net/wireless/broadcom/b43/pio.h -+++ b/drivers/net/wireless/broadcom/b43/pio.h -@@ -150,7 +150,7 @@ static inline void b43_piorx_write32(str - b43_write32(q->dev, q->mmio_base + offset, value); - } - -- -+#ifdef CPTCFG_B43_PIO - int b43_pio_init(struct b43_wldev *dev); - void b43_pio_free(struct b43_wldev *dev); - -@@ -161,5 +161,37 @@ void b43_pio_rx(struct b43_pio_rxqueue * - - void b43_pio_tx_suspend(struct b43_wldev *dev); - void b43_pio_tx_resume(struct b43_wldev *dev); -+#else -+static inline int b43_pio_init(struct b43_wldev *dev) -+{ -+ return 0; -+} -+ -+static inline void b43_pio_free(struct b43_wldev *dev) -+{ -+} -+ -+static inline int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb) -+{ -+ return 0; -+} -+ -+static inline void b43_pio_handle_txstatus(struct b43_wldev *dev, -+ const struct b43_txstatus *status) -+{ -+} -+ -+static inline void b43_pio_rx(struct b43_pio_rxqueue *q) -+{ -+} -+ -+static inline void b43_pio_tx_suspend(struct b43_wldev *dev) -+{ -+} -+ -+static inline void b43_pio_tx_resume(struct b43_wldev *dev) -+{ -+} -+#endif /* CPTCFG_B43_PIO */ - - #endif /* B43_PIO_H_ */ ---- a/drivers/net/wireless/broadcom/b43/Kconfig -+++ b/drivers/net/wireless/broadcom/b43/Kconfig -@@ -98,7 +98,7 @@ config B43_BCMA_PIO - default y - - config B43_PIO -- bool -+ bool "Broadcom 43xx PIO support" - depends on B43 && B43_SSB - select SSB_BLOCKIO - default y diff --git a/package/kernel/mac80211/patches/811-b43_no_pio.patch b/package/kernel/mac80211/patches/811-b43_no_pio.patch new file mode 100644 index 0000000000..79428c2784 --- /dev/null +++ b/package/kernel/mac80211/patches/811-b43_no_pio.patch @@ -0,0 +1,86 @@ +--- a/drivers/net/wireless/broadcom/b43/Makefile ++++ b/drivers/net/wireless/broadcom/b43/Makefile +@@ -17,7 +17,7 @@ b43-$(CPTCFG_B43_PHY_AC) += phy_ac.o + b43-y += sysfs.o + b43-y += xmit.o + b43-y += dma.o +-b43-y += pio.o ++b43-$(CPTCFG_B43_PIO) += pio.o + b43-y += rfkill.o + b43-y += ppr.o + b43-$(CPTCFG_B43_LEDS) += leds.o +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -2008,10 +2008,12 @@ static void b43_do_interrupt_thread(stru + dma_reason[0], dma_reason[1], + dma_reason[2], dma_reason[3], + dma_reason[4], dma_reason[5]); ++#ifdef CPTCFG_B43_PIO + b43err(dev->wl, "This device does not support DMA " + "on your system. It will now be switched to PIO.\n"); + /* Fall back to PIO transfers if we get fatal DMA errors! */ + dev->use_pio = true; ++#endif + b43_controller_restart(dev, "DMA error"); + return; + } +--- a/drivers/net/wireless/broadcom/b43/pio.h ++++ b/drivers/net/wireless/broadcom/b43/pio.h +@@ -150,7 +150,7 @@ static inline void b43_piorx_write32(str + b43_write32(q->dev, q->mmio_base + offset, value); + } + +- ++#ifdef CPTCFG_B43_PIO + int b43_pio_init(struct b43_wldev *dev); + void b43_pio_free(struct b43_wldev *dev); + +@@ -161,5 +161,37 @@ void b43_pio_rx(struct b43_pio_rxqueue * + + void b43_pio_tx_suspend(struct b43_wldev *dev); + void b43_pio_tx_resume(struct b43_wldev *dev); ++#else ++static inline int b43_pio_init(struct b43_wldev *dev) ++{ ++ return 0; ++} ++ ++static inline void b43_pio_free(struct b43_wldev *dev) ++{ ++} ++ ++static inline int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb) ++{ ++ return 0; ++} ++ ++static inline void b43_pio_handle_txstatus(struct b43_wldev *dev, ++ const struct b43_txstatus *status) ++{ ++} ++ ++static inline void b43_pio_rx(struct b43_pio_rxqueue *q) ++{ ++} ++ ++static inline void b43_pio_tx_suspend(struct b43_wldev *dev) ++{ ++} ++ ++static inline void b43_pio_tx_resume(struct b43_wldev *dev) ++{ ++} ++#endif /* CPTCFG_B43_PIO */ + + #endif /* B43_PIO_H_ */ +--- a/drivers/net/wireless/broadcom/b43/Kconfig ++++ b/drivers/net/wireless/broadcom/b43/Kconfig +@@ -98,7 +98,7 @@ config B43_BCMA_PIO + default y + + config B43_PIO +- bool ++ bool "Broadcom 43xx PIO support" + depends on B43 && B43_SSB + select SSB_BLOCKIO + default y diff --git a/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch new file mode 100644 index 0000000000..f8f555f3e6 --- /dev/null +++ b/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch @@ -0,0 +1,131 @@ +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -1648,7 +1648,7 @@ static void b43_write_beacon_template(st + len, ram_offset, shm_size_offset, rate); + + /* Write the PHY TX control parameters. */ +- antenna = B43_ANTENNA_DEFAULT; ++ antenna = dev->tx_antenna; + antenna = b43_antenna_to_phyctl(antenna); + ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); + /* We can't send beacons with short preamble. Would get PHY errors. */ +@@ -3297,8 +3297,8 @@ static int b43_chip_init(struct b43_wlde + + /* Select the antennae */ + if (phy->ops->set_rx_antenna) +- phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT); +- b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); ++ phy->ops->set_rx_antenna(dev, dev->rx_antenna); ++ b43_mgmtframe_txantenna(dev, dev->tx_antenna); + + if (phy->type == B43_PHYTYPE_B) { + value16 = b43_read16(dev, 0x005E); +@@ -3998,7 +3998,6 @@ static int b43_op_config(struct ieee8021 + struct b43_wldev *dev = wl->current_dev; + struct b43_phy *phy = &dev->phy; + struct ieee80211_conf *conf = &hw->conf; +- int antenna; + int err = 0; + + mutex_lock(&wl->mutex); +@@ -4041,11 +4040,9 @@ static int b43_op_config(struct ieee8021 + } + + /* Antennas for RX and management frame TX. */ +- antenna = B43_ANTENNA_DEFAULT; +- b43_mgmtframe_txantenna(dev, antenna); +- antenna = B43_ANTENNA_DEFAULT; ++ b43_mgmtframe_txantenna(dev, dev->tx_antenna); + if (phy->ops->set_rx_antenna) +- phy->ops->set_rx_antenna(dev, antenna); ++ phy->ops->set_rx_antenna(dev, dev->rx_antenna); + + if (wl->radio_enabled != phy->radio_on) { + if (wl->radio_enabled) { +@@ -5189,6 +5186,47 @@ static int b43_op_get_survey(struct ieee + return 0; + } + ++static int b43_op_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) ++{ ++ struct b43_wl *wl = hw_to_b43_wl(hw); ++ struct b43_wldev *dev = wl->current_dev; ++ ++ if (tx_ant == 1 && rx_ant == 1) { ++ dev->tx_antenna = B43_ANTENNA0; ++ dev->rx_antenna = B43_ANTENNA0; ++ } ++ else if (tx_ant == 2 && rx_ant == 2) { ++ dev->tx_antenna = B43_ANTENNA1; ++ dev->rx_antenna = B43_ANTENNA1; ++ } ++ else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3) { ++ dev->tx_antenna = B43_ANTENNA_DEFAULT; ++ dev->rx_antenna = B43_ANTENNA_DEFAULT; ++ } ++ else { ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++ ++static int b43_op_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) ++{ ++ struct b43_wl *wl = hw_to_b43_wl(hw); ++ struct b43_wldev *dev = wl->current_dev; ++ ++ switch (dev->tx_antenna) { ++ case B43_ANTENNA0: ++ *tx_ant = 1; *rx_ant = 1; break; ++ case B43_ANTENNA1: ++ *tx_ant = 2; *rx_ant = 2; break; ++ case B43_ANTENNA_DEFAULT: ++ *tx_ant = 3; *rx_ant = 3; break; ++ } ++ return 0; ++} ++ + static const struct ieee80211_ops b43_hw_ops = { + .tx = b43_op_tx, + .conf_tx = b43_op_conf_tx, +@@ -5210,6 +5248,8 @@ static const struct ieee80211_ops b43_hw + .sw_scan_complete = b43_op_sw_scan_complete_notifier, + .get_survey = b43_op_get_survey, + .rfkill_poll = b43_rfkill_poll, ++ .set_antenna = b43_op_set_antenna, ++ .get_antenna = b43_op_get_antenna, + }; + + /* Hard-reset the chip. Do not call this directly. +@@ -5513,6 +5553,8 @@ static int b43_one_core_attach(struct b4 + if (!wldev) + goto out; + ++ wldev->rx_antenna = B43_ANTENNA_DEFAULT; ++ wldev->tx_antenna = B43_ANTENNA_DEFAULT; + wldev->use_pio = b43_modparam_pio; + wldev->dev = dev; + wldev->wl = wl; +@@ -5603,6 +5645,9 @@ static struct b43_wl *b43_wireless_init( + + hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + ++ hw->wiphy->available_antennas_rx = 0x3; ++ hw->wiphy->available_antennas_tx = 0x3; ++ + wl->hw_registred = false; + hw->max_rates = 2; + SET_IEEE80211_DEV(hw, dev->dev); +--- a/drivers/net/wireless/broadcom/b43/b43.h ++++ b/drivers/net/wireless/broadcom/b43/b43.h +@@ -840,6 +840,8 @@ struct b43_wldev { + bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ + bool use_pio; /* TRUE if next init should use PIO */ + int gpiomask; /* GPIO LED mask as a module parameter */ ++ int rx_antenna; /* Used RX antenna (B43_ANTENNAxxx) */ ++ int tx_antenna; /* Used TX antenna (B43_ANTENNAxxx) */ + + /* PHY/Radio device. */ + struct b43_phy phy; diff --git a/package/kernel/mac80211/patches/813-b43-reduce-number-of-RX-slots.patch b/package/kernel/mac80211/patches/813-b43-reduce-number-of-RX-slots.patch new file mode 100644 index 0000000000..5899706896 --- /dev/null +++ b/package/kernel/mac80211/patches/813-b43-reduce-number-of-RX-slots.patch @@ -0,0 +1,11 @@ +--- a/drivers/net/wireless/broadcom/b43/dma.h ++++ b/drivers/net/wireless/broadcom/b43/dma.h +@@ -169,7 +169,7 @@ struct b43_dmadesc_generic { + + /* DMA engine tuning knobs */ + #define B43_TXRING_SLOTS 256 +-#define B43_RXRING_SLOTS 256 ++#define B43_RXRING_SLOTS 32 + #define B43_DMA0_RX_FW598_BUFSIZE (B43_DMA0_RX_FW598_FO + IEEE80211_MAX_FRAME_LEN) + #define B43_DMA0_RX_FW351_BUFSIZE (B43_DMA0_RX_FW351_FO + IEEE80211_MAX_FRAME_LEN) + diff --git a/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch b/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch new file mode 100644 index 0000000000..8d0c0412d2 --- /dev/null +++ b/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch @@ -0,0 +1,17 @@ +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -2899,6 +2899,14 @@ static int b43_gpio_init(struct b43_wlde + } else if (dev->dev->chip_id == 0x5354) { + /* Don't allow overtaking buttons GPIOs */ + set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */ ++ } else if (dev->dev->chip_id == BCMA_CHIP_ID_BCM4716 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM47162 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM5356 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM5357 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM53572) { ++ /* just use gpio 0 and 1 for 2.4 GHz wifi led */ ++ set &= 0x3; ++ mask &= 0x3; + } + + if (0 /* FIXME: conditional unknown */ ) { diff --git a/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch b/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch new file mode 100644 index 0000000000..ef7f3c92d2 --- /dev/null +++ b/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch @@ -0,0 +1,11 @@ +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -117,7 +117,7 @@ static int b43_modparam_pio = 0; + module_param_named(pio, b43_modparam_pio, int, 0644); + MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO"); + +-static int modparam_allhwsupport = !IS_ENABLED(CPTCFG_BRCMSMAC); ++static int modparam_allhwsupport = 1; + module_param_named(allhwsupport, modparam_allhwsupport, int, 0444); + MODULE_PARM_DESC(allhwsupport, "Enable support for all hardware (even it if overlaps with the brcmsmac driver)"); + diff --git a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch deleted file mode 100644 index f8f555f3e6..0000000000 --- a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch +++ /dev/null @@ -1,131 +0,0 @@ ---- a/drivers/net/wireless/broadcom/b43/main.c -+++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -1648,7 +1648,7 @@ static void b43_write_beacon_template(st - len, ram_offset, shm_size_offset, rate); - - /* Write the PHY TX control parameters. */ -- antenna = B43_ANTENNA_DEFAULT; -+ antenna = dev->tx_antenna; - antenna = b43_antenna_to_phyctl(antenna); - ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); - /* We can't send beacons with short preamble. Would get PHY errors. */ -@@ -3297,8 +3297,8 @@ static int b43_chip_init(struct b43_wlde - - /* Select the antennae */ - if (phy->ops->set_rx_antenna) -- phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT); -- b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); -+ phy->ops->set_rx_antenna(dev, dev->rx_antenna); -+ b43_mgmtframe_txantenna(dev, dev->tx_antenna); - - if (phy->type == B43_PHYTYPE_B) { - value16 = b43_read16(dev, 0x005E); -@@ -3998,7 +3998,6 @@ static int b43_op_config(struct ieee8021 - struct b43_wldev *dev = wl->current_dev; - struct b43_phy *phy = &dev->phy; - struct ieee80211_conf *conf = &hw->conf; -- int antenna; - int err = 0; - - mutex_lock(&wl->mutex); -@@ -4041,11 +4040,9 @@ static int b43_op_config(struct ieee8021 - } - - /* Antennas for RX and management frame TX. */ -- antenna = B43_ANTENNA_DEFAULT; -- b43_mgmtframe_txantenna(dev, antenna); -- antenna = B43_ANTENNA_DEFAULT; -+ b43_mgmtframe_txantenna(dev, dev->tx_antenna); - if (phy->ops->set_rx_antenna) -- phy->ops->set_rx_antenna(dev, antenna); -+ phy->ops->set_rx_antenna(dev, dev->rx_antenna); - - if (wl->radio_enabled != phy->radio_on) { - if (wl->radio_enabled) { -@@ -5189,6 +5186,47 @@ static int b43_op_get_survey(struct ieee - return 0; - } - -+static int b43_op_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) -+{ -+ struct b43_wl *wl = hw_to_b43_wl(hw); -+ struct b43_wldev *dev = wl->current_dev; -+ -+ if (tx_ant == 1 && rx_ant == 1) { -+ dev->tx_antenna = B43_ANTENNA0; -+ dev->rx_antenna = B43_ANTENNA0; -+ } -+ else if (tx_ant == 2 && rx_ant == 2) { -+ dev->tx_antenna = B43_ANTENNA1; -+ dev->rx_antenna = B43_ANTENNA1; -+ } -+ else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3) { -+ dev->tx_antenna = B43_ANTENNA_DEFAULT; -+ dev->rx_antenna = B43_ANTENNA_DEFAULT; -+ } -+ else { -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+ -+static int b43_op_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) -+{ -+ struct b43_wl *wl = hw_to_b43_wl(hw); -+ struct b43_wldev *dev = wl->current_dev; -+ -+ switch (dev->tx_antenna) { -+ case B43_ANTENNA0: -+ *tx_ant = 1; *rx_ant = 1; break; -+ case B43_ANTENNA1: -+ *tx_ant = 2; *rx_ant = 2; break; -+ case B43_ANTENNA_DEFAULT: -+ *tx_ant = 3; *rx_ant = 3; break; -+ } -+ return 0; -+} -+ - static const struct ieee80211_ops b43_hw_ops = { - .tx = b43_op_tx, - .conf_tx = b43_op_conf_tx, -@@ -5210,6 +5248,8 @@ static const struct ieee80211_ops b43_hw - .sw_scan_complete = b43_op_sw_scan_complete_notifier, - .get_survey = b43_op_get_survey, - .rfkill_poll = b43_rfkill_poll, -+ .set_antenna = b43_op_set_antenna, -+ .get_antenna = b43_op_get_antenna, - }; - - /* Hard-reset the chip. Do not call this directly. -@@ -5513,6 +5553,8 @@ static int b43_one_core_attach(struct b4 - if (!wldev) - goto out; - -+ wldev->rx_antenna = B43_ANTENNA_DEFAULT; -+ wldev->tx_antenna = B43_ANTENNA_DEFAULT; - wldev->use_pio = b43_modparam_pio; - wldev->dev = dev; - wldev->wl = wl; -@@ -5603,6 +5645,9 @@ static struct b43_wl *b43_wireless_init( - - hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; - -+ hw->wiphy->available_antennas_rx = 0x3; -+ hw->wiphy->available_antennas_tx = 0x3; -+ - wl->hw_registred = false; - hw->max_rates = 2; - SET_IEEE80211_DEV(hw, dev->dev); ---- a/drivers/net/wireless/broadcom/b43/b43.h -+++ b/drivers/net/wireless/broadcom/b43/b43.h -@@ -840,6 +840,8 @@ struct b43_wldev { - bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ - bool use_pio; /* TRUE if next init should use PIO */ - int gpiomask; /* GPIO LED mask as a module parameter */ -+ int rx_antenna; /* Used RX antenna (B43_ANTENNAxxx) */ -+ int tx_antenna; /* Used TX antenna (B43_ANTENNAxxx) */ - - /* PHY/Radio device. */ - struct b43_phy phy; diff --git a/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch b/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch deleted file mode 100644 index 5899706896..0000000000 --- a/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/wireless/broadcom/b43/dma.h -+++ b/drivers/net/wireless/broadcom/b43/dma.h -@@ -169,7 +169,7 @@ struct b43_dmadesc_generic { - - /* DMA engine tuning knobs */ - #define B43_TXRING_SLOTS 256 --#define B43_RXRING_SLOTS 256 -+#define B43_RXRING_SLOTS 32 - #define B43_DMA0_RX_FW598_BUFSIZE (B43_DMA0_RX_FW598_FO + IEEE80211_MAX_FRAME_LEN) - #define B43_DMA0_RX_FW351_BUFSIZE (B43_DMA0_RX_FW351_FO + IEEE80211_MAX_FRAME_LEN) - diff --git a/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch b/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch deleted file mode 100644 index 8d0c0412d2..0000000000 --- a/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/drivers/net/wireless/broadcom/b43/main.c -+++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -2899,6 +2899,14 @@ static int b43_gpio_init(struct b43_wlde - } else if (dev->dev->chip_id == 0x5354) { - /* Don't allow overtaking buttons GPIOs */ - set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */ -+ } else if (dev->dev->chip_id == BCMA_CHIP_ID_BCM4716 || -+ dev->dev->chip_id == BCMA_CHIP_ID_BCM47162 || -+ dev->dev->chip_id == BCMA_CHIP_ID_BCM5356 || -+ dev->dev->chip_id == BCMA_CHIP_ID_BCM5357 || -+ dev->dev->chip_id == BCMA_CHIP_ID_BCM53572) { -+ /* just use gpio 0 and 1 for 2.4 GHz wifi led */ -+ set &= 0x3; -+ mask &= 0x3; - } - - if (0 /* FIXME: conditional unknown */ ) { diff --git a/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch b/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch deleted file mode 100644 index ef7f3c92d2..0000000000 --- a/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/wireless/broadcom/b43/main.c -+++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -117,7 +117,7 @@ static int b43_modparam_pio = 0; - module_param_named(pio, b43_modparam_pio, int, 0644); - MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO"); - --static int modparam_allhwsupport = !IS_ENABLED(CPTCFG_BRCMSMAC); -+static int modparam_allhwsupport = 1; - module_param_named(allhwsupport, modparam_allhwsupport, int, 0444); - MODULE_PARM_DESC(allhwsupport, "Enable support for all hardware (even it if overlaps with the brcmsmac driver)"); -