From: dissent1 Date: Thu, 3 Nov 2016 15:07:31 +0000 (+0300) Subject: ipq806x: add support for RPM clock controller X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=07d0c1b947e6bbda527ee47458aa3964359d5644;p=openwrt%2Fstaging%2Fnoltari.git ipq806x: add support for RPM clock controller The patch #179 for RPM has initially been made for apq806x board. It has been modified to support ipq806x instead of apq8064. Signed-off-by: Pavel Kubelun --- diff --git a/target/linux/ipq806x/config-4.4 b/target/linux/ipq806x/config-4.4 index 7094965dd2..a392cb23ac 100644 --- a/target/linux/ipq806x/config-4.4 +++ b/target/linux/ipq806x/config-4.4 @@ -341,11 +341,13 @@ CONFIG_PRINTK_TIME=y CONFIG_PTP_1588_CLOCK=y CONFIG_QCOM_ADM=y CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_CLK_RPM=y CONFIG_QCOM_GDSC=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_HFPLL=y CONFIG_QCOM_PM=y CONFIG_QCOM_QFPROM=y +CONFIG_QCOM_RPMCC=y CONFIG_QCOM_SCM=y CONFIG_QCOM_SCM_32=y # CONFIG_QCOM_SMD is not set diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi index fcc08d91ae..f2d310eeaa 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi @@ -101,6 +101,19 @@ }; clocks { + + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + sleep_clk: sleep_clk { compatible = "fixed-clock"; clock-frequency = <32768>; @@ -211,6 +224,11 @@ #address-cells = <1>; #size-cells = <0>; + rpmcc: clock-controller { + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; + #clock-cells = <1>; + }; + smb208_regulators { compatible = "qcom,rpm-smb208-regulators"; diff --git a/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch b/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch new file mode 100644 index 0000000000..60505e100b --- /dev/null +++ b/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch @@ -0,0 +1,183 @@ +From a085f877a882b465fce74188c9d8efd12bd5acd4 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd +Date: Mon, 26 Oct 2015 18:10:09 -0700 +Subject: clk: qcom: Move cxo/pxo/xo into dt files + +Put these clocks into the dt files instead of registering them +from C code. This provides a few benefits. It allows us to +specify the frequency of these clocks at the board level instead +of hard-coding them in the driver. It allows us to insert an RPM +clock in between the consumers of the crystals and the actual +clock. And finally, it helps us transition the GCC driver to use +RPM clocks when that configuration is enabled. + +Cc: Georgi Djakov +Signed-off-by: Stephen Boyd +--- + drivers/clk/qcom/gcc-apq8084.c | 16 +++++++--------- + drivers/clk/qcom/gcc-ipq806x.c | 14 ++++++-------- + drivers/clk/qcom/gcc-msm8660.c | 15 +++++++-------- + drivers/clk/qcom/gcc-msm8960.c | 14 ++++++-------- + drivers/clk/qcom/gcc-msm8974.c | 17 +++++++---------- + 5 files changed, 33 insertions(+), 43 deletions(-) + +diff --git a/drivers/clk/qcom/gcc-apq8084.c b/drivers/clk/qcom/gcc-apq8084.c +index 1567c3a..070037a 100644 +--- a/drivers/clk/qcom/gcc-apq8084.c ++++ b/drivers/clk/qcom/gcc-apq8084.c +@@ -3607,18 +3607,16 @@ MODULE_DEVICE_TABLE(of, gcc_apq8084_match_table); + + static int gcc_apq8084_probe(struct platform_device *pdev) + { +- struct clk *clk; ++ int ret; + struct device *dev = &pdev->dev; + +- /* Temporary until RPM clocks supported */ +- clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000); +- if (IS_ERR(clk)) +- return PTR_ERR(clk); ++ ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000); ++ if (ret) ++ return ret; + +- clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL, +- CLK_IS_ROOT, 32768); +- if (IS_ERR(clk)) +- return PTR_ERR(clk); ++ ret = qcom_cc_register_sleep_clk(dev); ++ if (ret) ++ return ret; + + return qcom_cc_probe(pdev, &gcc_apq8084_desc); + } +diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c +index 16fc64c..dd5402b 100644 +--- a/drivers/clk/qcom/gcc-ipq806x.c ++++ b/drivers/clk/qcom/gcc-ipq806x.c +@@ -3023,19 +3023,17 @@ MODULE_DEVICE_TABLE(of, gcc_ipq806x_match_table); + + static int gcc_ipq806x_probe(struct platform_device *pdev) + { +- struct clk *clk; + struct device *dev = &pdev->dev; + struct regmap *regmap; + int ret; + +- /* Temporary until RPM clocks supported */ +- clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000); +- if (IS_ERR(clk)) +- return PTR_ERR(clk); ++ ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 25000000); ++ if (ret) ++ return ret; + +- clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 25000000); +- if (IS_ERR(clk)) +- return PTR_ERR(clk); ++ ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 25000000); ++ if (ret) ++ return ret; + + ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc); + if (ret) +diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c +index f110bb5..ad41303 100644 +--- a/drivers/clk/qcom/gcc-msm8660.c ++++ b/drivers/clk/qcom/gcc-msm8660.c +@@ -2720,17 +2720,16 @@ MODULE_DEVICE_TABLE(of, gcc_msm8660_match_table); + + static int gcc_msm8660_probe(struct platform_device *pdev) + { +- struct clk *clk; ++ int ret; + struct device *dev = &pdev->dev; + +- /* Temporary until RPM clocks supported */ +- clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000); +- if (IS_ERR(clk)) +- return PTR_ERR(clk); ++ ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000); ++ if (ret) ++ return ret; + +- clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000); +- if (IS_ERR(clk)) +- return PTR_ERR(clk); ++ ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000); ++ if (ret) ++ return ret; + + return qcom_cc_probe(pdev, &gcc_msm8660_desc); + } +diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c +index 66c18bc..983dd7d 100644 +--- a/drivers/clk/qcom/gcc-msm8960.c ++++ b/drivers/clk/qcom/gcc-msm8960.c +@@ -3503,7 +3503,6 @@ MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table); + + static int gcc_msm8960_probe(struct platform_device *pdev) + { +- struct clk *clk; + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct platform_device *tsens; +@@ -3513,14 +3512,13 @@ static int gcc_msm8960_probe(struct platform_device *pdev) + if (!match) + return -EINVAL; + +- /* Temporary until RPM clocks supported */ +- clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000); +- if (IS_ERR(clk)) +- return PTR_ERR(clk); ++ ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000); ++ if (ret) ++ return ret; + +- clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000); +- if (IS_ERR(clk)) +- return PTR_ERR(clk); ++ ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000); ++ if (ret) ++ return ret; + + ret = qcom_cc_probe(pdev, match->data); + if (ret) +diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c +index 28abb8f..335952d 100644 +--- a/drivers/clk/qcom/gcc-msm8974.c ++++ b/drivers/clk/qcom/gcc-msm8974.c +@@ -2717,7 +2717,7 @@ static void msm8974_pro_clock_override(void) + + static int gcc_msm8974_probe(struct platform_device *pdev) + { +- struct clk *clk; ++ int ret; + struct device *dev = &pdev->dev; + bool pro; + const struct of_device_id *id; +@@ -2730,16 +2730,13 @@ static int gcc_msm8974_probe(struct platform_device *pdev) + if (pro) + msm8974_pro_clock_override(); + +- /* Temporary until RPM clocks supported */ +- clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000); +- if (IS_ERR(clk)) +- return PTR_ERR(clk); ++ ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000); ++ if (ret) ++ return ret; + +- /* Should move to DT node? */ +- clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL, +- CLK_IS_ROOT, 32768); +- if (IS_ERR(clk)) +- return PTR_ERR(clk); ++ ret = qcom_cc_register_sleep_clk(dev); ++ if (ret) ++ return ret; + + return qcom_cc_probe(pdev, &gcc_msm8974_desc); + } +-- +cgit v0.12 diff --git a/target/linux/ipq806x/patches-4.4/178-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch b/target/linux/ipq806x/patches-4.4/178-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch new file mode 100644 index 0000000000..8126c7c51e --- /dev/null +++ b/target/linux/ipq806x/patches-4.4/178-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch @@ -0,0 +1,746 @@ +From patchwork Wed Nov 2 15:56:56 2016 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v9,1/3] clk: qcom: Add support for SMD-RPM Clocks +From: Georgi Djakov +X-Patchwork-Id: 9409419 +Message-Id: <20161102155658.32203-2-georgi.djakov@linaro.org> +To: sboyd@codeaurora.org, mturquette@baylibre.com +Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org, + robh+dt@kernel.org, mark.rutland@arm.com, + linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, + georgi.djakov@linaro.org +Date: Wed, 2 Nov 2016 17:56:56 +0200 + +This adds initial support for clocks controlled by the Resource +Power Manager (RPM) processor on some Qualcomm SoCs, which use +the qcom_smd_rpm driver to communicate with RPM. +Such platforms are msm8916, apq8084 and msm8974. + +The RPM is a dedicated hardware engine for managing the shared +SoC resources in order to keep the lowest power profile. It +communicates with other hardware subsystems via shared memory +and accepts clock requests, aggregates the requests and turns +the clocks on/off or scales them on demand. + +This driver is based on the codeaurora.org driver: +https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c + +Signed-off-by: Georgi Djakov +--- + .../devicetree/bindings/clock/qcom,rpmcc.txt | 36 ++ + drivers/clk/qcom/Kconfig | 16 + + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/clk-smd-rpm.c | 571 +++++++++++++++++++++ + include/dt-bindings/clock/qcom,rpmcc.h | 45 ++ + 5 files changed, 669 insertions(+) + create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmcc.txt + create mode 100644 drivers/clk/qcom/clk-smd-rpm.c + create mode 100644 include/dt-bindings/clock/qcom,rpmcc.h + +-- +To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in +the body of a message to majordomo@vger.kernel.org +More majordomo info at http://vger.kernel.org/majordomo-info.html + +--- /dev/null ++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +@@ -0,0 +1,36 @@ ++Qualcomm RPM Clock Controller Binding ++------------------------------------------------ ++The RPM is a dedicated hardware engine for managing the shared ++SoC resources in order to keep the lowest power profile. It ++communicates with other hardware subsystems via shared memory ++and accepts clock requests, aggregates the requests and turns ++the clocks on/off or scales them on demand. ++ ++Required properties : ++- compatible : shall contain only one of the following. The generic ++ compatible "qcom,rpmcc" should be also included. ++ ++ "qcom,rpmcc-msm8916", "qcom,rpmcc" ++ ++- #clock-cells : shall contain 1 ++ ++Example: ++ smd { ++ compatible = "qcom,smd"; ++ ++ rpm { ++ interrupts = <0 168 1>; ++ qcom,ipc = <&apcs 8 0>; ++ qcom,smd-edge = <15>; ++ ++ rpm_requests { ++ compatible = "qcom,rpm-msm8916"; ++ qcom,smd-channels = "rpm_requests"; ++ ++ rpmcc: clock-controller { ++ compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; ++ #clock-cells = <1>; ++ }; ++ }; ++ }; ++ }; +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -2,6 +2,9 @@ config QCOM_GDSC + bool + select PM_GENERIC_DOMAINS if PM + ++config QCOM_RPMCC ++ bool ++ + config COMMON_CLK_QCOM + tristate "Support for Qualcomm's clock controllers" + depends on OF +@@ -9,6 +12,19 @@ config COMMON_CLK_QCOM + select REGMAP_MMIO + select RESET_CONTROLLER + ++config QCOM_CLK_SMD_RPM ++ tristate "RPM over SMD based Clock Controller" ++ depends on COMMON_CLK_QCOM && QCOM_SMD_RPM ++ select QCOM_RPMCC ++ help ++ The RPM (Resource Power Manager) is a dedicated hardware engine for ++ managing the shared SoC resources in order to keep the lowest power ++ profile. It communicates with other hardware subsystems via shared ++ memory and accepts clock requests, aggregates the requests and turns ++ the clocks on/off or scales them on demand. ++ Say Y if you want to support the clocks exposed by the RPM on ++ platforms such as apq8016, apq8084, msm8974 etc. ++ + config APQ_GCC_8084 + tristate "APQ8084 Global Clock Controller" + select QCOM_GDSC +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -28,3 +28,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8 + obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o + obj-$(CONFIG_QCOM_HFPLL) += hfpll.o + obj-$(CONFIG_KRAITCC) += krait-cc.o ++obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o +--- /dev/null ++++ b/drivers/clk/qcom/clk-smd-rpm.c +@@ -0,0 +1,571 @@ ++/* ++ * Copyright (c) 2016, Linaro Limited ++ * Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This software is licensed under the terms of the GNU General Public ++ * License version 2, as published by the Free Software Foundation, and ++ * may be copied, distributed, and modified under those terms. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define QCOM_RPM_KEY_SOFTWARE_ENABLE 0x6e657773 ++#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY 0x62636370 ++#define QCOM_RPM_SMD_KEY_RATE 0x007a484b ++#define QCOM_RPM_SMD_KEY_ENABLE 0x62616e45 ++#define QCOM_RPM_SMD_KEY_STATE 0x54415453 ++#define QCOM_RPM_SCALING_ENABLE_ID 0x2 ++ ++#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, stat_id, \ ++ key) \ ++ static struct clk_smd_rpm _platform##_##_active; \ ++ static struct clk_smd_rpm _platform##_##_name = { \ ++ .rpm_res_type = (type), \ ++ .rpm_clk_id = (r_id), \ ++ .rpm_status_id = (stat_id), \ ++ .rpm_key = (key), \ ++ .peer = &_platform##_##_active, \ ++ .rate = INT_MAX, \ ++ .hw.init = &(struct clk_init_data){ \ ++ .ops = &clk_smd_rpm_ops, \ ++ .name = #_name, \ ++ .parent_names = (const char *[]){ "xo_board" }, \ ++ .num_parents = 1, \ ++ }, \ ++ }; \ ++ static struct clk_smd_rpm _platform##_##_active = { \ ++ .rpm_res_type = (type), \ ++ .rpm_clk_id = (r_id), \ ++ .rpm_status_id = (stat_id), \ ++ .active_only = true, \ ++ .rpm_key = (key), \ ++ .peer = &_platform##_##_name, \ ++ .rate = INT_MAX, \ ++ .hw.init = &(struct clk_init_data){ \ ++ .ops = &clk_smd_rpm_ops, \ ++ .name = #_active, \ ++ .parent_names = (const char *[]){ "xo_board" }, \ ++ .num_parents = 1, \ ++ }, \ ++ } ++ ++#define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, \ ++ stat_id, r, key) \ ++ static struct clk_smd_rpm _platform##_##_active; \ ++ static struct clk_smd_rpm _platform##_##_name = { \ ++ .rpm_res_type = (type), \ ++ .rpm_clk_id = (r_id), \ ++ .rpm_status_id = (stat_id), \ ++ .rpm_key = (key), \ ++ .branch = true, \ ++ .peer = &_platform##_##_active, \ ++ .rate = (r), \ ++ .hw.init = &(struct clk_init_data){ \ ++ .ops = &clk_smd_rpm_branch_ops, \ ++ .name = #_name, \ ++ .parent_names = (const char *[]){ "xo_board" }, \ ++ .num_parents = 1, \ ++ }, \ ++ }; \ ++ static struct clk_smd_rpm _platform##_##_active = { \ ++ .rpm_res_type = (type), \ ++ .rpm_clk_id = (r_id), \ ++ .rpm_status_id = (stat_id), \ ++ .active_only = true, \ ++ .rpm_key = (key), \ ++ .branch = true, \ ++ .peer = &_platform##_##_name, \ ++ .rate = (r), \ ++ .hw.init = &(struct clk_init_data){ \ ++ .ops = &clk_smd_rpm_branch_ops, \ ++ .name = #_active, \ ++ .parent_names = (const char *[]){ "xo_board" }, \ ++ .num_parents = 1, \ ++ }, \ ++ } ++ ++#define DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id) \ ++ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \ ++ 0, QCOM_RPM_SMD_KEY_RATE) ++ ++#define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r) \ ++ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, \ ++ r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE) ++ ++#define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id) \ ++ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \ ++ 0, QCOM_RPM_SMD_KEY_STATE) ++ ++#define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id) \ ++ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \ ++ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \ ++ QCOM_RPM_KEY_SOFTWARE_ENABLE) ++ ++#define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, r_id) \ ++ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \ ++ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \ ++ QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY) ++ ++#define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw) ++ ++struct clk_smd_rpm { ++ const int rpm_res_type; ++ const int rpm_key; ++ const int rpm_clk_id; ++ const int rpm_status_id; ++ const bool active_only; ++ bool enabled; ++ bool branch; ++ struct clk_smd_rpm *peer; ++ struct clk_hw hw; ++ unsigned long rate; ++ struct qcom_smd_rpm *rpm; ++}; ++ ++struct clk_smd_rpm_req { ++ __le32 key; ++ __le32 nbytes; ++ __le32 value; ++}; ++ ++struct rpm_cc { ++ struct qcom_rpm *rpm; ++ struct clk_hw_onecell_data data; ++ struct clk_hw *hws[]; ++}; ++ ++struct rpm_smd_clk_desc { ++ struct clk_smd_rpm **clks; ++ size_t num_clks; ++}; ++ ++static DEFINE_MUTEX(rpm_smd_clk_lock); ++ ++static int clk_smd_rpm_handoff(struct clk_smd_rpm *r) ++{ ++ int ret; ++ struct clk_smd_rpm_req req = { ++ .key = cpu_to_le32(r->rpm_key), ++ .nbytes = cpu_to_le32(sizeof(u32)), ++ .value = cpu_to_le32(INT_MAX), ++ }; ++ ++ ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE, ++ r->rpm_res_type, r->rpm_clk_id, &req, ++ sizeof(req)); ++ if (ret) ++ return ret; ++ ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE, ++ r->rpm_res_type, r->rpm_clk_id, &req, ++ sizeof(req)); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int clk_smd_rpm_set_rate_active(struct clk_smd_rpm *r, ++ unsigned long rate) ++{ ++ struct clk_smd_rpm_req req = { ++ .key = cpu_to_le32(r->rpm_key), ++ .nbytes = cpu_to_le32(sizeof(u32)), ++ .value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */ ++ }; ++ ++ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE, ++ r->rpm_res_type, r->rpm_clk_id, &req, ++ sizeof(req)); ++} ++ ++static int clk_smd_rpm_set_rate_sleep(struct clk_smd_rpm *r, ++ unsigned long rate) ++{ ++ struct clk_smd_rpm_req req = { ++ .key = cpu_to_le32(r->rpm_key), ++ .nbytes = cpu_to_le32(sizeof(u32)), ++ .value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */ ++ }; ++ ++ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE, ++ r->rpm_res_type, r->rpm_clk_id, &req, ++ sizeof(req)); ++} ++ ++static void to_active_sleep(struct clk_smd_rpm *r, unsigned long rate, ++ unsigned long *active, unsigned long *sleep) ++{ ++ *active = rate; ++ ++ /* ++ * Active-only clocks don't care what the rate is during sleep. So, ++ * they vote for zero. ++ */ ++ if (r->active_only) ++ *sleep = 0; ++ else ++ *sleep = *active; ++} ++ ++static int clk_smd_rpm_prepare(struct clk_hw *hw) ++{ ++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw); ++ struct clk_smd_rpm *peer = r->peer; ++ unsigned long this_rate = 0, this_sleep_rate = 0; ++ unsigned long peer_rate = 0, peer_sleep_rate = 0; ++ unsigned long active_rate, sleep_rate; ++ int ret = 0; ++ ++ mutex_lock(&rpm_smd_clk_lock); ++ ++ /* Don't send requests to the RPM if the rate has not been set. */ ++ if (!r->rate) ++ goto out; ++ ++ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate); ++ ++ /* Take peer clock's rate into account only if it's enabled. */ ++ if (peer->enabled) ++ to_active_sleep(peer, peer->rate, ++ &peer_rate, &peer_sleep_rate); ++ ++ active_rate = max(this_rate, peer_rate); ++ ++ if (r->branch) ++ active_rate = !!active_rate; ++ ++ ret = clk_smd_rpm_set_rate_active(r, active_rate); ++ if (ret) ++ goto out; ++ ++ sleep_rate = max(this_sleep_rate, peer_sleep_rate); ++ if (r->branch) ++ sleep_rate = !!sleep_rate; ++ ++ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate); ++ if (ret) ++ /* Undo the active set vote and restore it */ ++ ret = clk_smd_rpm_set_rate_active(r, peer_rate); ++ ++out: ++ if (!ret) ++ r->enabled = true; ++ ++ mutex_unlock(&rpm_smd_clk_lock); ++ ++ return ret; ++} ++ ++static void clk_smd_rpm_unprepare(struct clk_hw *hw) ++{ ++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw); ++ struct clk_smd_rpm *peer = r->peer; ++ unsigned long peer_rate = 0, peer_sleep_rate = 0; ++ unsigned long active_rate, sleep_rate; ++ int ret; ++ ++ mutex_lock(&rpm_smd_clk_lock); ++ ++ if (!r->rate) ++ goto out; ++ ++ /* Take peer clock's rate into account only if it's enabled. */ ++ if (peer->enabled) ++ to_active_sleep(peer, peer->rate, &peer_rate, ++ &peer_sleep_rate); ++ ++ active_rate = r->branch ? !!peer_rate : peer_rate; ++ ret = clk_smd_rpm_set_rate_active(r, active_rate); ++ if (ret) ++ goto out; ++ ++ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate; ++ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate); ++ if (ret) ++ goto out; ++ ++ r->enabled = false; ++ ++out: ++ mutex_unlock(&rpm_smd_clk_lock); ++} ++ ++static int clk_smd_rpm_set_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long parent_rate) ++{ ++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw); ++ struct clk_smd_rpm *peer = r->peer; ++ unsigned long active_rate, sleep_rate; ++ unsigned long this_rate = 0, this_sleep_rate = 0; ++ unsigned long peer_rate = 0, peer_sleep_rate = 0; ++ int ret = 0; ++ ++ mutex_lock(&rpm_smd_clk_lock); ++ ++ if (!r->enabled) ++ goto out; ++ ++ to_active_sleep(r, rate, &this_rate, &this_sleep_rate); ++ ++ /* Take peer clock's rate into account only if it's enabled. */ ++ if (peer->enabled) ++ to_active_sleep(peer, peer->rate, ++ &peer_rate, &peer_sleep_rate); ++ ++ active_rate = max(this_rate, peer_rate); ++ ret = clk_smd_rpm_set_rate_active(r, active_rate); ++ if (ret) ++ goto out; ++ ++ sleep_rate = max(this_sleep_rate, peer_sleep_rate); ++ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate); ++ if (ret) ++ goto out; ++ ++ r->rate = rate; ++ ++out: ++ mutex_unlock(&rpm_smd_clk_lock); ++ ++ return ret; ++} ++ ++static long clk_smd_rpm_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ /* ++ * RPM handles rate rounding and we don't have a way to ++ * know what the rate will be, so just return whatever ++ * rate is requested. ++ */ ++ return rate; ++} ++ ++static unsigned long clk_smd_rpm_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct clk_smd_rpm *r = to_clk_smd_rpm(hw); ++ ++ /* ++ * RPM handles rate rounding and we don't have a way to ++ * know what the rate will be, so just return whatever ++ * rate was set. ++ */ ++ return r->rate; ++} ++ ++static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm) ++{ ++ int ret; ++ struct clk_smd_rpm_req req = { ++ .key = cpu_to_le32(QCOM_RPM_SMD_KEY_ENABLE), ++ .nbytes = cpu_to_le32(sizeof(u32)), ++ .value = cpu_to_le32(1), ++ }; ++ ++ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_SLEEP_STATE, ++ QCOM_SMD_RPM_MISC_CLK, ++ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req)); ++ if (ret) { ++ pr_err("RPM clock scaling (sleep set) not enabled!\n"); ++ return ret; ++ } ++ ++ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_ACTIVE_STATE, ++ QCOM_SMD_RPM_MISC_CLK, ++ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req)); ++ if (ret) { ++ pr_err("RPM clock scaling (active set) not enabled!\n"); ++ return ret; ++ } ++ ++ pr_debug("%s: RPM clock scaling is enabled\n", __func__); ++ return 0; ++} ++ ++static const struct clk_ops clk_smd_rpm_ops = { ++ .prepare = clk_smd_rpm_prepare, ++ .unprepare = clk_smd_rpm_unprepare, ++ .set_rate = clk_smd_rpm_set_rate, ++ .round_rate = clk_smd_rpm_round_rate, ++ .recalc_rate = clk_smd_rpm_recalc_rate, ++}; ++ ++static const struct clk_ops clk_smd_rpm_branch_ops = { ++ .prepare = clk_smd_rpm_prepare, ++ .unprepare = clk_smd_rpm_unprepare, ++ .round_rate = clk_smd_rpm_round_rate, ++ .recalc_rate = clk_smd_rpm_recalc_rate, ++}; ++ ++/* msm8916 */ ++DEFINE_CLK_SMD_RPM(msm8916, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0); ++DEFINE_CLK_SMD_RPM(msm8916, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); ++DEFINE_CLK_SMD_RPM(msm8916, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0); ++DEFINE_CLK_SMD_RPM_QDSS(msm8916, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1); ++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk1, bb_clk1_a, 1); ++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk2, bb_clk2_a, 2); ++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk1, rf_clk1_a, 4); ++DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk2, rf_clk2_a, 5); ++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk1_pin, bb_clk1_a_pin, 1); ++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk2_pin, bb_clk2_a_pin, 2); ++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk1_pin, rf_clk1_a_pin, 4); ++DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk2_pin, rf_clk2_a_pin, 5); ++ ++static struct clk_smd_rpm *msm8916_clks[] = { ++ [RPM_SMD_PCNOC_CLK] = &msm8916_pcnoc_clk, ++ [RPM_SMD_PCNOC_A_CLK] = &msm8916_pcnoc_a_clk, ++ [RPM_SMD_SNOC_CLK] = &msm8916_snoc_clk, ++ [RPM_SMD_SNOC_A_CLK] = &msm8916_snoc_a_clk, ++ [RPM_SMD_BIMC_CLK] = &msm8916_bimc_clk, ++ [RPM_SMD_BIMC_A_CLK] = &msm8916_bimc_a_clk, ++ [RPM_SMD_QDSS_CLK] = &msm8916_qdss_clk, ++ [RPM_SMD_QDSS_A_CLK] = &msm8916_qdss_a_clk, ++ [RPM_SMD_BB_CLK1] = &msm8916_bb_clk1, ++ [RPM_SMD_BB_CLK1_A] = &msm8916_bb_clk1_a, ++ [RPM_SMD_BB_CLK2] = &msm8916_bb_clk2, ++ [RPM_SMD_BB_CLK2_A] = &msm8916_bb_clk2_a, ++ [RPM_SMD_RF_CLK1] = &msm8916_rf_clk1, ++ [RPM_SMD_RF_CLK1_A] = &msm8916_rf_clk1_a, ++ [RPM_SMD_RF_CLK2] = &msm8916_rf_clk2, ++ [RPM_SMD_RF_CLK2_A] = &msm8916_rf_clk2_a, ++ [RPM_SMD_BB_CLK1_PIN] = &msm8916_bb_clk1_pin, ++ [RPM_SMD_BB_CLK1_A_PIN] = &msm8916_bb_clk1_a_pin, ++ [RPM_SMD_BB_CLK2_PIN] = &msm8916_bb_clk2_pin, ++ [RPM_SMD_BB_CLK2_A_PIN] = &msm8916_bb_clk2_a_pin, ++ [RPM_SMD_RF_CLK1_PIN] = &msm8916_rf_clk1_pin, ++ [RPM_SMD_RF_CLK1_A_PIN] = &msm8916_rf_clk1_a_pin, ++ [RPM_SMD_RF_CLK2_PIN] = &msm8916_rf_clk2_pin, ++ [RPM_SMD_RF_CLK2_A_PIN] = &msm8916_rf_clk2_a_pin, ++}; ++ ++static const struct rpm_smd_clk_desc rpm_clk_msm8916 = { ++ .clks = msm8916_clks, ++ .num_clks = ARRAY_SIZE(msm8916_clks), ++}; ++ ++static const struct of_device_id rpm_smd_clk_match_table[] = { ++ { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table); ++ ++static int rpm_smd_clk_probe(struct platform_device *pdev) ++{ ++ struct clk_hw **hws; ++ struct rpm_cc *rcc; ++ struct clk_hw_onecell_data *data; ++ int ret; ++ size_t num_clks, i; ++ struct qcom_smd_rpm *rpm; ++ struct clk_smd_rpm **rpm_smd_clks; ++ const struct rpm_smd_clk_desc *desc; ++ ++ rpm = dev_get_drvdata(pdev->dev.parent); ++ if (!rpm) { ++ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n"); ++ return -ENODEV; ++ } ++ ++ desc = of_device_get_match_data(&pdev->dev); ++ if (!desc) ++ return -EINVAL; ++ ++ rpm_smd_clks = desc->clks; ++ num_clks = desc->num_clks; ++ ++ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks, ++ GFP_KERNEL); ++ if (!rcc) ++ return -ENOMEM; ++ ++ hws = rcc->hws; ++ data = &rcc->data; ++ data->num = num_clks; ++ ++ for (i = 0; i < num_clks; i++) { ++ if (!rpm_smd_clks[i]) { ++ continue; ++ } ++ ++ rpm_smd_clks[i]->rpm = rpm; ++ ++ ret = clk_smd_rpm_handoff(rpm_smd_clks[i]); ++ if (ret) ++ goto err; ++ } ++ ++ ret = clk_smd_rpm_enable_scaling(rpm); ++ if (ret) ++ goto err; ++ ++ for (i = 0; i < num_clks; i++) { ++ if (!rpm_smd_clks[i]) { ++ data->hws[i] = ERR_PTR(-ENOENT); ++ continue; ++ } ++ ++ ret = devm_clk_hw_register(&pdev->dev, &rpm_smd_clks[i]->hw); ++ if (ret) ++ goto err; ++ } ++ ++ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get, ++ data); ++ if (ret) ++ goto err; ++ ++ return 0; ++err: ++ dev_err(&pdev->dev, "Error registering SMD clock driver (%d)\n", ret); ++ return ret; ++} ++ ++static int rpm_smd_clk_remove(struct platform_device *pdev) ++{ ++ of_clk_del_provider(pdev->dev.of_node); ++ return 0; ++} ++ ++static struct platform_driver rpm_smd_clk_driver = { ++ .driver = { ++ .name = "qcom-clk-smd-rpm", ++ .of_match_table = rpm_smd_clk_match_table, ++ }, ++ .probe = rpm_smd_clk_probe, ++ .remove = rpm_smd_clk_remove, ++}; ++ ++static int __init rpm_smd_clk_init(void) ++{ ++ return platform_driver_register(&rpm_smd_clk_driver); ++} ++core_initcall(rpm_smd_clk_init); ++ ++static void __exit rpm_smd_clk_exit(void) ++{ ++ platform_driver_unregister(&rpm_smd_clk_driver); ++} ++module_exit(rpm_smd_clk_exit); ++ ++MODULE_DESCRIPTION("Qualcomm RPM over SMD Clock Controller Driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:qcom-clk-smd-rpm"); +--- /dev/null ++++ b/include/dt-bindings/clock/qcom,rpmcc.h +@@ -0,0 +1,45 @@ ++/* ++ * Copyright 2015 Linaro Limited ++ * ++ * This software is licensed under the terms of the GNU General Public ++ * License version 2, as published by the Free Software Foundation, and ++ * may be copied, distributed, and modified under those terms. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H ++#define _DT_BINDINGS_CLK_MSM_RPMCC_H ++ ++/* msm8916 */ ++#define RPM_SMD_XO_CLK_SRC 0 ++#define RPM_SMD_XO_A_CLK_SRC 1 ++#define RPM_SMD_PCNOC_CLK 2 ++#define RPM_SMD_PCNOC_A_CLK 3 ++#define RPM_SMD_SNOC_CLK 4 ++#define RPM_SMD_SNOC_A_CLK 5 ++#define RPM_SMD_BIMC_CLK 6 ++#define RPM_SMD_BIMC_A_CLK 7 ++#define RPM_SMD_QDSS_CLK 8 ++#define RPM_SMD_QDSS_A_CLK 9 ++#define RPM_SMD_BB_CLK1 10 ++#define RPM_SMD_BB_CLK1_A 11 ++#define RPM_SMD_BB_CLK2 12 ++#define RPM_SMD_BB_CLK2_A 13 ++#define RPM_SMD_RF_CLK1 14 ++#define RPM_SMD_RF_CLK1_A 15 ++#define RPM_SMD_RF_CLK2 16 ++#define RPM_SMD_RF_CLK2_A 17 ++#define RPM_SMD_BB_CLK1_PIN 18 ++#define RPM_SMD_BB_CLK1_A_PIN 19 ++#define RPM_SMD_BB_CLK2_PIN 20 ++#define RPM_SMD_BB_CLK2_A_PIN 21 ++#define RPM_SMD_RF_CLK1_PIN 22 ++#define RPM_SMD_RF_CLK1_A_PIN 23 ++#define RPM_SMD_RF_CLK2_PIN 24 ++#define RPM_SMD_RF_CLK2_A_PIN 25 ++ ++#endif diff --git a/target/linux/ipq806x/patches-4.4/179-clk-qcom-Add-support-for-RPM-Clocks.patch b/target/linux/ipq806x/patches-4.4/179-clk-qcom-Add-support-for-RPM-Clocks.patch new file mode 100644 index 0000000000..27e20be9f4 --- /dev/null +++ b/target/linux/ipq806x/patches-4.4/179-clk-qcom-Add-support-for-RPM-Clocks.patch @@ -0,0 +1,598 @@ +!This is the adjusted version of patch that has been submitted to upstream and that, unfortunately, provides support for RPM clocks only for apq8064 board. + +!TODO: make a patch that adds support for ipq806x along with apq8064 and not replaces it. + +From patchwork Wed Nov 2 15:56:57 2016 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v9,2/3] clk: qcom: Add support for RPM Clocks +From: Georgi Djakov +X-Patchwork-Id: 9409425 +Message-Id: <20161102155658.32203-3-georgi.djakov@linaro.org> +To: sboyd@codeaurora.org, mturquette@baylibre.com +Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org, + robh+dt@kernel.org, mark.rutland@arm.com, + linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, + georgi.djakov@linaro.org +Date: Wed, 2 Nov 2016 17:56:57 +0200 + +This adds initial support for clocks controlled by the Resource +Power Manager (RPM) processor on some Qualcomm SoCs, which use +the qcom_rpm driver to communicate with RPM. +Such platforms are ipq806x and msm8960. + +Signed-off-by: Georgi Djakov +--- + .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 + + drivers/clk/qcom/Kconfig | 13 + + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/clk-rpm.c | 489 +++++++++++++++++++++ + include/dt-bindings/clock/qcom,rpmcc.h | 24 + + 5 files changed, 528 insertions(+) + create mode 100644 drivers/clk/qcom/clk-rpm.c + +-- +To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in +the body of a message to majordomo@vger.kernel.org +More majordomo info at http://vger.kernel.org/majordomo-info.html + +--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt ++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +@@ -11,6 +11,7 @@ Required properties : + compatible "qcom,rpmcc" should be also included. + + "qcom,rpmcc-msm8916", "qcom,rpmcc" ++ "qcom,rpmcc-ipq806x", "qcom,rpmcc" + + - #clock-cells : shall contain 1 + +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -12,6 +12,19 @@ config COMMON_CLK_QCOM + select REGMAP_MMIO + select RESET_CONTROLLER + ++config QCOM_CLK_RPM ++ tristate "RPM based Clock Controller" ++ depends on COMMON_CLK_QCOM && MFD_QCOM_RPM ++ select QCOM_RPMCC ++ help ++ The RPM (Resource Power Manager) is a dedicated hardware engine for ++ managing the shared SoC resources in order to keep the lowest power ++ profile. It communicates with other hardware subsystems via shared ++ memory and accepts clock requests, aggregates the requests and turns ++ the clocks on/off or scales them on demand. ++ Say Y if you want to support the clocks exposed by the RPM on ++ platforms such as ipq806x, msm8660, msm8960 etc. ++ + config QCOM_CLK_SMD_RPM + tristate "RPM over SMD based Clock Controller" + depends on COMMON_CLK_QCOM && QCOM_SMD_RPM +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -29,3 +29,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8 + obj-$(CONFIG_QCOM_HFPLL) += hfpll.o + obj-$(CONFIG_KRAITCC) += krait-cc.o + obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o ++obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o +--- /dev/null ++++ b/drivers/clk/qcom/clk-rpm.c +@@ -0,0 +1,486 @@ ++/* ++ * Copyright (c) 2016, Linaro Limited ++ * Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This software is licensed under the terms of the GNU General Public ++ * License version 2, as published by the Free Software Foundation, and ++ * may be copied, distributed, and modified under those terms. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define QCOM_RPM_MISC_CLK_TYPE 0x306b6c63 ++#define QCOM_RPM_SCALING_ENABLE_ID 0x2 ++ ++#define DEFINE_CLK_RPM(_platform, _name, _active, r_id) \ ++ static struct clk_rpm _platform##_##_active; \ ++ static struct clk_rpm _platform##_##_name = { \ ++ .rpm_clk_id = (r_id), \ ++ .peer = &_platform##_##_active, \ ++ .rate = INT_MAX, \ ++ .hw.init = &(struct clk_init_data){ \ ++ .ops = &clk_rpm_ops, \ ++ .name = #_name, \ ++ .parent_names = (const char *[]){ "pxo_board" }, \ ++ .num_parents = 1, \ ++ }, \ ++ }; \ ++ static struct clk_rpm _platform##_##_active = { \ ++ .rpm_clk_id = (r_id), \ ++ .peer = &_platform##_##_name, \ ++ .active_only = true, \ ++ .rate = INT_MAX, \ ++ .hw.init = &(struct clk_init_data){ \ ++ .ops = &clk_rpm_ops, \ ++ .name = #_active, \ ++ .parent_names = (const char *[]){ "pxo_board" }, \ ++ .num_parents = 1, \ ++ }, \ ++ } ++ ++#define DEFINE_CLK_RPM_PXO_BRANCH(_platform, _name, _active, r_id, r) \ ++ static struct clk_rpm _platform##_##_active; \ ++ static struct clk_rpm _platform##_##_name = { \ ++ .rpm_clk_id = (r_id), \ ++ .active_only = true, \ ++ .peer = &_platform##_##_active, \ ++ .rate = (r), \ ++ .branch = true, \ ++ .hw.init = &(struct clk_init_data){ \ ++ .ops = &clk_rpm_branch_ops, \ ++ .name = #_name, \ ++ .parent_names = (const char *[]){ "pxo_board" }, \ ++ .num_parents = 1, \ ++ }, \ ++ }; \ ++ static struct clk_rpm _platform##_##_active = { \ ++ .rpm_clk_id = (r_id), \ ++ .peer = &_platform##_##_name, \ ++ .rate = (r), \ ++ .branch = true, \ ++ .hw.init = &(struct clk_init_data){ \ ++ .ops = &clk_rpm_branch_ops, \ ++ .name = #_active, \ ++ .parent_names = (const char *[]){ "pxo_board" }, \ ++ .num_parents = 1, \ ++ }, \ ++ } ++ ++#define DEFINE_CLK_RPM_CXO_BRANCH(_platform, _name, _active, r_id, r) \ ++ static struct clk_rpm _platform##_##_active; \ ++ static struct clk_rpm _platform##_##_name = { \ ++ .rpm_clk_id = (r_id), \ ++ .peer = &_platform##_##_active, \ ++ .rate = (r), \ ++ .branch = true, \ ++ .hw.init = &(struct clk_init_data){ \ ++ .ops = &clk_rpm_branch_ops, \ ++ .name = #_name, \ ++ .parent_names = (const char *[]){ "cxo_board" }, \ ++ .num_parents = 1, \ ++ }, \ ++ }; \ ++ static struct clk_rpm _platform##_##_active = { \ ++ .rpm_clk_id = (r_id), \ ++ .active_only = true, \ ++ .peer = &_platform##_##_name, \ ++ .rate = (r), \ ++ .branch = true, \ ++ .hw.init = &(struct clk_init_data){ \ ++ .ops = &clk_rpm_branch_ops, \ ++ .name = #_active, \ ++ .parent_names = (const char *[]){ "cxo_board" }, \ ++ .num_parents = 1, \ ++ }, \ ++ } ++ ++#define to_clk_rpm(_hw) container_of(_hw, struct clk_rpm, hw) ++ ++struct clk_rpm { ++ const int rpm_clk_id; ++ const bool active_only; ++ unsigned long rate; ++ bool enabled; ++ bool branch; ++ struct clk_rpm *peer; ++ struct clk_hw hw; ++ struct qcom_rpm *rpm; ++}; ++ ++struct rpm_cc { ++ struct qcom_rpm *rpm; ++ struct clk_hw_onecell_data data; ++ struct clk_hw *hws[]; ++}; ++ ++struct rpm_clk_desc { ++ struct clk_rpm **clks; ++ size_t num_clks; ++}; ++ ++static DEFINE_MUTEX(rpm_clk_lock); ++ ++static int clk_rpm_handoff(struct clk_rpm *r) ++{ ++ int ret; ++ u32 value = INT_MAX; ++ ++ ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, ++ r->rpm_clk_id, &value, 1); ++ if (ret) ++ return ret; ++ ret = qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE, ++ r->rpm_clk_id, &value, 1); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int clk_rpm_set_rate_active(struct clk_rpm *r, unsigned long rate) ++{ ++ u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */ ++ ++ return qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, ++ r->rpm_clk_id, &value, 1); ++} ++ ++static int clk_rpm_set_rate_sleep(struct clk_rpm *r, unsigned long rate) ++{ ++ u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */ ++ ++ return qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE, ++ r->rpm_clk_id, &value, 1); ++} ++ ++static void to_active_sleep(struct clk_rpm *r, unsigned long rate, ++ unsigned long *active, unsigned long *sleep) ++{ ++ *active = rate; ++ ++ /* ++ * Active-only clocks don't care what the rate is during sleep. So, ++ * they vote for zero. ++ */ ++ if (r->active_only) ++ *sleep = 0; ++ else ++ *sleep = *active; ++} ++ ++static int clk_rpm_prepare(struct clk_hw *hw) ++{ ++ struct clk_rpm *r = to_clk_rpm(hw); ++ struct clk_rpm *peer = r->peer; ++ unsigned long this_rate = 0, this_sleep_rate = 0; ++ unsigned long peer_rate = 0, peer_sleep_rate = 0; ++ unsigned long active_rate, sleep_rate; ++ int ret = 0; ++ ++ mutex_lock(&rpm_clk_lock); ++ ++ /* Don't send requests to the RPM if the rate has not been set. */ ++ if (!r->rate) ++ goto out; ++ ++ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate); ++ ++ /* Take peer clock's rate into account only if it's enabled. */ ++ if (peer->enabled) ++ to_active_sleep(peer, peer->rate, ++ &peer_rate, &peer_sleep_rate); ++ ++ active_rate = max(this_rate, peer_rate); ++ ++ if (r->branch) ++ active_rate = !!active_rate; ++ ++ ret = clk_rpm_set_rate_active(r, active_rate); ++ if (ret) ++ goto out; ++ ++ sleep_rate = max(this_sleep_rate, peer_sleep_rate); ++ if (r->branch) ++ sleep_rate = !!sleep_rate; ++ ++ ret = clk_rpm_set_rate_sleep(r, sleep_rate); ++ if (ret) ++ /* Undo the active set vote and restore it */ ++ ret = clk_rpm_set_rate_active(r, peer_rate); ++ ++out: ++ if (!ret) ++ r->enabled = true; ++ ++ mutex_unlock(&rpm_clk_lock); ++ ++ return ret; ++} ++ ++static void clk_rpm_unprepare(struct clk_hw *hw) ++{ ++ struct clk_rpm *r = to_clk_rpm(hw); ++ struct clk_rpm *peer = r->peer; ++ unsigned long peer_rate = 0, peer_sleep_rate = 0; ++ unsigned long active_rate, sleep_rate; ++ int ret; ++ ++ mutex_lock(&rpm_clk_lock); ++ ++ if (!r->rate) ++ goto out; ++ ++ /* Take peer clock's rate into account only if it's enabled. */ ++ if (peer->enabled) ++ to_active_sleep(peer, peer->rate, &peer_rate, ++ &peer_sleep_rate); ++ ++ active_rate = r->branch ? !!peer_rate : peer_rate; ++ ret = clk_rpm_set_rate_active(r, active_rate); ++ if (ret) ++ goto out; ++ ++ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate; ++ ret = clk_rpm_set_rate_sleep(r, sleep_rate); ++ if (ret) ++ goto out; ++ ++ r->enabled = false; ++ ++out: ++ mutex_unlock(&rpm_clk_lock); ++} ++ ++static int clk_rpm_set_rate(struct clk_hw *hw, ++ unsigned long rate, unsigned long parent_rate) ++{ ++ struct clk_rpm *r = to_clk_rpm(hw); ++ struct clk_rpm *peer = r->peer; ++ unsigned long active_rate, sleep_rate; ++ unsigned long this_rate = 0, this_sleep_rate = 0; ++ unsigned long peer_rate = 0, peer_sleep_rate = 0; ++ int ret = 0; ++ ++ mutex_lock(&rpm_clk_lock); ++ ++ if (!r->enabled) ++ goto out; ++ ++ to_active_sleep(r, rate, &this_rate, &this_sleep_rate); ++ ++ /* Take peer clock's rate into account only if it's enabled. */ ++ if (peer->enabled) ++ to_active_sleep(peer, peer->rate, ++ &peer_rate, &peer_sleep_rate); ++ ++ active_rate = max(this_rate, peer_rate); ++ ret = clk_rpm_set_rate_active(r, active_rate); ++ if (ret) ++ goto out; ++ ++ sleep_rate = max(this_sleep_rate, peer_sleep_rate); ++ ret = clk_rpm_set_rate_sleep(r, sleep_rate); ++ if (ret) ++ goto out; ++ ++ r->rate = rate; ++ ++out: ++ mutex_unlock(&rpm_clk_lock); ++ ++ return ret; ++} ++ ++static long clk_rpm_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ /* ++ * RPM handles rate rounding and we don't have a way to ++ * know what the rate will be, so just return whatever ++ * rate is requested. ++ */ ++ return rate; ++} ++ ++static unsigned long clk_rpm_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct clk_rpm *r = to_clk_rpm(hw); ++ ++ /* ++ * RPM handles rate rounding and we don't have a way to ++ * know what the rate will be, so just return whatever ++ * rate was set. ++ */ ++ return r->rate; ++} ++ ++static const struct clk_ops clk_rpm_ops = { ++ .prepare = clk_rpm_prepare, ++ .unprepare = clk_rpm_unprepare, ++ .set_rate = clk_rpm_set_rate, ++ .round_rate = clk_rpm_round_rate, ++ .recalc_rate = clk_rpm_recalc_rate, ++}; ++ ++static const struct clk_ops clk_rpm_branch_ops = { ++ .prepare = clk_rpm_prepare, ++ .unprepare = clk_rpm_unprepare, ++ .round_rate = clk_rpm_round_rate, ++ .recalc_rate = clk_rpm_recalc_rate, ++}; ++ ++/* ipq806x */ ++DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK); ++DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK); ++DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK); ++DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK); ++DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK); ++ ++static struct clk_rpm *ipq806x_clks[] = { ++ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk, ++ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk, ++ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk, ++ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk, ++ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk, ++ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk, ++ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk, ++ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk, ++ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk, ++ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk, ++ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk, ++ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk, ++ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk, ++ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk, ++ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk, ++ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk, ++}; ++ ++static const struct rpm_clk_desc rpm_clk_ipq806x = { ++ .clks = ipq806x_clks, ++ .num_clks = ARRAY_SIZE(ipq806x_clks), ++}; ++ ++static const struct of_device_id rpm_clk_match_table[] = { ++ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, rpm_clk_match_table); ++ ++static int rpm_clk_probe(struct platform_device *pdev) ++{ ++ struct clk_hw **hws; ++ struct rpm_cc *rcc; ++ struct clk_hw_onecell_data *data; ++ int ret; ++ size_t num_clks, i; ++ struct qcom_rpm *rpm; ++ struct clk_rpm **rpm_clks; ++ const struct rpm_clk_desc *desc; ++ ++ rpm = dev_get_drvdata(pdev->dev.parent); ++ if (!rpm) { ++ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n"); ++ return -ENODEV; ++ } ++ ++ desc = of_device_get_match_data(&pdev->dev); ++ if (!desc) ++ return -EINVAL; ++ ++ rpm_clks = desc->clks; ++ num_clks = desc->num_clks; ++ ++ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks, ++ GFP_KERNEL); ++ if (!rcc) ++ return -ENOMEM; ++ ++ hws = rcc->hws; ++ data = &rcc->data; ++ data->num = num_clks; ++ ++ for (i = 0; i < num_clks; i++) { ++ if (!rpm_clks[i]) ++ continue; ++ ++ rpm_clks[i]->rpm = rpm; ++ ++ ret = clk_rpm_handoff(rpm_clks[i]); ++ if (ret) ++ goto err; ++ } ++ ++ for (i = 0; i < num_clks; i++) { ++ if (!rpm_clks[i]) { ++ data->hws[i] = ERR_PTR(-ENOENT); ++ continue; ++ } ++ ++ ret = devm_clk_hw_register(&pdev->dev, &rpm_clks[i]->hw); ++ if (ret) ++ goto err; ++ } ++ ++ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get, ++ data); ++ if (ret) ++ goto err; ++ ++ return 0; ++err: ++ dev_err(&pdev->dev, "Error registering RPM Clock driver (%d)\n", ret); ++ return ret; ++} ++ ++static int rpm_clk_remove(struct platform_device *pdev) ++{ ++ of_clk_del_provider(pdev->dev.of_node); ++ return 0; ++} ++ ++static struct platform_driver rpm_clk_driver = { ++ .driver = { ++ .name = "qcom-clk-rpm", ++ .of_match_table = rpm_clk_match_table, ++ }, ++ .probe = rpm_clk_probe, ++ .remove = rpm_clk_remove, ++}; ++ ++static int __init rpm_clk_init(void) ++{ ++ return platform_driver_register(&rpm_clk_driver); ++} ++core_initcall(rpm_clk_init); ++ ++static void __exit rpm_clk_exit(void) ++{ ++ platform_driver_unregister(&rpm_clk_driver); ++} ++module_exit(rpm_clk_exit); ++ ++MODULE_DESCRIPTION("Qualcomm RPM Clock Controller Driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:qcom-clk-rpm"); +--- a/include/dt-bindings/clock/qcom,rpmcc.h ++++ b/include/dt-bindings/clock/qcom,rpmcc.h +@@ -14,6 +14,28 @@ + #ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H + #define _DT_BINDINGS_CLK_MSM_RPMCC_H + ++/* ipq806x */ ++#define RPM_PXO_CLK 0 ++#define RPM_PXO_A_CLK 1 ++#define RPM_CXO_CLK 2 ++#define RPM_CXO_A_CLK 3 ++#define RPM_APPS_FABRIC_CLK 4 ++#define RPM_APPS_FABRIC_A_CLK 5 ++#define RPM_CFPB_CLK 6 ++#define RPM_CFPB_A_CLK 7 ++#define RPM_DAYTONA_FABRIC_CLK 8 ++#define RPM_DAYTONA_FABRIC_A_CLK 9 ++#define RPM_EBI1_CLK 10 ++#define RPM_EBI1_A_CLK 11 ++#define RPM_NSS_FABRIC_0_CLK 12 ++#define RPM_NSS_FABRIC_0_A_CLK 13 ++#define RPM_NSS_FABRIC_1_CLK 14 ++#define RPM_NSS_FABRIC_1_A_CLK 15 ++#define RPM_SYS_FABRIC_CLK 16 ++#define RPM_SYS_FABRIC_A_CLK 17 ++#define RPM_SFPB_CLK 18 ++#define RPM_SFPB_A_CLK 19 ++ + /* msm8916 */ + #define RPM_SMD_XO_CLK_SRC 0 + #define RPM_SMD_XO_A_CLK_SRC 1 diff --git a/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch b/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch new file mode 100644 index 0000000000..c8d83e9e57 --- /dev/null +++ b/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch @@ -0,0 +1,53 @@ +From patchwork Wed Nov 2 15:56:58 2016 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v9,3/3] clk: qcom: Always add factor clock for xo clocks +From: Georgi Djakov +X-Patchwork-Id: 9409421 +Message-Id: <20161102155658.32203-4-georgi.djakov@linaro.org> +To: sboyd@codeaurora.org, mturquette@baylibre.com +Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org, + robh+dt@kernel.org, mark.rutland@arm.com, + linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, + georgi.djakov@linaro.org +Date: Wed, 2 Nov 2016 17:56:58 +0200 + +Currently the RPM/RPM-SMD clock drivers do not register the xo clocks, +so we should always add factor clock. When we later add xo clocks support +into the drivers, we should update this function to skip registration. +By doing so we avoid any DT dependencies. + +Signed-off-by: Georgi Djakov +--- + drivers/clk/qcom/common.c | 15 ++++++--------- + 1 file changed, 6 insertions(+), 9 deletions(-) + +-- +To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in +the body of a message to majordomo@vger.kernel.org +More majordomo info at http://vger.kernel.org/majordomo-info.html + +--- a/drivers/clk/qcom/common.c ++++ b/drivers/clk/qcom/common.c +@@ -154,15 +154,12 @@ int qcom_cc_register_board_clk(struct de + const char *name, unsigned long rate) + { + bool add_factor = true; +- struct device_node *node; + +- /* The RPM clock driver will add the factor clock if present */ +- if (IS_ENABLED(CONFIG_QCOM_RPMCC)) { +- node = of_find_compatible_node(NULL, NULL, "qcom,rpmcc"); +- if (of_device_is_available(node)) +- add_factor = false; +- of_node_put(node); +- } ++ /* ++ * TODO: The RPM clock driver currently does not support the xo clock. ++ * When xo is added to the RPM clock driver, we should change this ++ * function to skip registration of xo factor clocks. ++ */ + + return _qcom_cc_register_board_clk(dev, path, name, rate, add_factor); + } diff --git a/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch b/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch new file mode 100644 index 0000000000..d8bbcf057c --- /dev/null +++ b/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch @@ -0,0 +1,45 @@ +From 6da1b6260843da455cad8180c18d020679fd4a46 Mon Sep 17 00:00:00 2001 +From: Pavel Kubelun +Date: Sun, 6 Nov 2016 19:07:24 +0300 +Subject: [PATCH] ipq806x: add board clocks and rpmcc into DT + +Signed-off-by: Pavel Kubelun +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi +index 8c989c0..6b06118 100644 +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -92,6 +92,18 @@ + }; + + clocks { ++ cxo_board { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <25000000>; ++ }; ++ ++ pxo_board { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <25000000>; ++ }; ++ + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; +@@ -175,6 +187,11 @@ + #address-cells = <1>; + #size-cells = <0>; + ++ rpmcc: clock-controller { ++ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; ++ #clock-cells = <1>; ++ }; ++ + regulators { + compatible = "qcom,rpm-smb208-regulators"; +