From: Stijn Tintel Date: Wed, 24 Nov 2021 12:39:31 +0000 (+0200) Subject: openvswitch: document missing options X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=07c5f565bfaa60e9c8b9603adee0d196ec4f05a9;p=feed%2Fpackages.git openvswitch: document missing options Commit 1038ac123558 ("openvswitch: add support for definining bridge ports...") added two new options: - drop_unknown_ports - ports They are missing from the README, so add them. Signed-off-by: Stijn Tintel --- diff --git a/net/openvswitch/README.md b/net/openvswitch/README.md index b5911a597f..bfc19a032f 100644 --- a/net/openvswitch/README.md +++ b/net/openvswitch/README.md @@ -85,14 +85,16 @@ after adding or changing these options. The ovs_bridge section also supports the options below, for initialising a virtual bridge with an OpenFlow controller. -| Name | Type | Required | Default | Description | -|---------------|---------|----------|--------------------------------|------------------------------------------------------------| -| disabled | boolean | no | 0 | If set to true, disable initialisation of the named bridge | -| name | string | no | Inherits UCI config block name | The name of the switch in the OVS daemon | -| controller | string | no | (none) | The endpoint of an OpenFlow controller for this bridge | -| datapath_id | string | no | (none) | The OpenFlow datapath ID for this bridge | -| datapath_desc | string | no | (none) | The OpenFlow datapath description for this bridge | -| fail_mode | string | no | standalone | The bridge failure mode | +| Name | Type | Required | Default | Description | +|--------------------|---------|----------|--------------------------------|------------------------------------------------------------| +| disabled | boolean | no | 0 | If set to true, disable initialisation of the named bridge | +| name | string | no | Inherits UCI config block name | The name of the switch in the OVS daemon | +| controller | string | no | (none) | The endpoint of an OpenFlow controller for this bridge | +| datapath_id | string | no | (none) | The OpenFlow datapath ID for this bridge | +| datapath_desc | string | no | (none) | The OpenFlow datapath description for this bridge | +| drop_unknown_ports | boolean | no | 0 | Remove ports not defined in UCI from the bridge | +| fail_mode | string | no | standalone | The bridge failure mode | +| ports | list | no | (none) | List of ports to add to the bridge | The ovs_port section can be used to add ports to a bridge. It supports the options below.