From: Felix Fietkau Date: Mon, 6 Aug 2012 15:33:24 +0000 (+0000) Subject: ath5k: add various pending tx power fixes, vastly improves stability and performance... X-Git-Tag: reboot~13204 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0796df61af1f15de855c25de9a562cae8836a02e;p=openwrt%2Fstaging%2Fxback.git ath5k: add various pending tx power fixes, vastly improves stability and performance with various cards SVN-Revision: 33014 --- diff --git a/package/mac80211/patches/300-pending_work.patch b/package/mac80211/patches/300-pending_work.patch index 3a9a2c1eeb..4f61ff7370 100644 --- a/package/mac80211/patches/300-pending_work.patch +++ b/package/mac80211/patches/300-pending_work.patch @@ -1,5 +1,16 @@ --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c +@@ -210,8 +210,8 @@ ath5k_config(struct ieee80211_hw *hw, u3 + } + + if ((changed & IEEE80211_CONF_CHANGE_POWER) && +- (ah->power_level != conf->power_level)) { +- ah->power_level = conf->power_level; ++ (ah->ah_txpower.txp_requested != conf->power_level)) { ++ ah->ah_txpower.txp_requested = conf->power_level; + + /* Half dB steps */ + ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2)); @@ -622,7 +622,7 @@ ath5k_conf_tx(struct ieee80211_hw *hw, s qi.tqi_aifs = params->aifs; qi.tqi_cw_min = params->cw_min; @@ -4256,113 +4267,151 @@ default: --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h -@@ -1418,6 +1418,7 @@ struct ath5k_hw { - s16 txp_min_pwr; - s16 txp_max_pwr; - s16 txp_cur_pwr; -+ s16 txp_user_pwr; - /* Values in 0.5dB units */ - s16 txp_offset; - s16 txp_ofdm; +@@ -1331,7 +1331,6 @@ struct ath5k_hw { + unsigned int nexttbtt; /* next beacon time in TU */ + struct ath5k_txq *cabq; /* content after beacon */ + +- int power_level; /* Requested tx power in dBm */ + bool assoc; /* associate state */ + bool enable_beacon; /* true if beacons are on */ + +@@ -1425,6 +1424,7 @@ struct ath5k_hw { + /* Value in dB units */ + s16 txp_cck_ofdm_pwr_delta; + bool txp_setup; ++ int txp_requested; /* Requested tx power in dBm */ + } ah_txpower; + + struct ath5k_nfcal_hist ah_nfcal_hist; --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c -@@ -2953,6 +2953,9 @@ ath5k_init(struct ieee80211_hw *hw) - hw->queues = 1; - } +@@ -325,6 +325,8 @@ ath5k_setup_channels(struct ath5k_hw *ah + if (!ath5k_is_standard_channel(ch, band)) + continue; -+ /* init tx_power setting to maximum */ -+ ah->ah_txpower.txp_user_pwr = AR5K_TUNE_MAX_TXPOWER; ++ channels[count].max_power = AR5K_TUNE_MAX_TXPOWER/2; + - tasklet_init(&ah->rxtq, ath5k_tasklet_rx, (unsigned long)ah); - tasklet_init(&ah->txtq, ath5k_tasklet_tx, (unsigned long)ah); - tasklet_init(&ah->beacontq, ath5k_tasklet_beacon, (unsigned long)ah); + count++; + } + +@@ -725,7 +727,7 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, s + ret = ah->ah_setup_tx_desc(ah, ds, pktlen, + ieee80211_get_hdrlen_from_skb(skb), padsize, + get_hw_packet_type(skb), +- (ah->power_level * 2), ++ (ah->ah_txpower.txp_requested * 2), + hw_rate, + info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags, + cts_rate, duration); +@@ -1780,7 +1782,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, + ds->ds_data = bf->skbaddr; + ret = ah->ah_setup_tx_desc(ah, ds, skb->len, + ieee80211_get_hdrlen_from_skb(skb), padsize, +- AR5K_PKT_TYPE_BEACON, (ah->power_level * 2), ++ AR5K_PKT_TYPE_BEACON, ++ (ah->ah_txpower.txp_requested * 2), + ieee80211_get_tx_rate(ah->hw, info)->hw_value, + 1, AR5K_TXKEYIX_INVALID, + antenna, flags, 0, 0); --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c -@@ -1484,7 +1484,7 @@ ath5k_eeprom_read_target_rate_pwr_info(s - case AR5K_EEPROM_MODE_11A: - offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); - rate_pcal_info = ee->ee_rate_tpwr_a; -- ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; -+ ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN; - break; - case AR5K_EEPROM_MODE_11B: - offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); ---- a/drivers/net/wireless/ath/ath5k/eeprom.h -+++ b/drivers/net/wireless/ath/ath5k/eeprom.h -@@ -182,6 +182,7 @@ - #define AR5K_EEPROM_EEP_DELTA 10 - #define AR5K_EEPROM_N_MODES 3 - #define AR5K_EEPROM_N_5GHZ_CHAN 10 -+#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 - #define AR5K_EEPROM_N_2GHZ_CHAN 3 - #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 - #define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 +@@ -524,7 +524,7 @@ ath5k_eeprom_read_freq_list(struct ath5k + + freq1 = val & 0xff; + if (!freq1) +- break; ++ continue; + + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq1, mode); +@@ -532,7 +532,7 @@ ath5k_eeprom_read_freq_list(struct ath5k + + freq2 = (val >> 8) & 0xff; + if (!freq2) +- break; ++ continue; + + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq2, mode); --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c -@@ -3585,14 +3585,12 @@ ath5k_setup_rate_powertable(struct ath5k - * ath5k_hw_txpower() - Set transmission power limit for a given channel - * @ah: The &struct ath5k_hw - * @channel: The &struct ieee80211_channel -- * @txpower: Requested tx power in 0.5dB steps - * - * Combines all of the above to set the requested tx power limit -- * on hw. -+ * on hw to ah->ah_txpower.txp_user_pwr. - */ - static int --ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, -- u8 txpower) -+ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel) +@@ -3518,6 +3518,7 @@ ath5k_setup_rate_powertable(struct ath5k { - struct ath5k_rate_pcal_info rate_info; - struct ieee80211_channel *curr_channel = ah->ah_current_channel; -@@ -3600,11 +3598,6 @@ ath5k_hw_txpower(struct ath5k_hw *ah, st - u8 type; - int ret; - -- if (txpower > AR5K_TUNE_MAX_TXPOWER) { -- ATH5K_ERR(ah, "invalid tx power: %u\n", txpower); -- return -EINVAL; -- } -- - ee_mode = ath5k_eeprom_mode_from_channel(channel); - if (ee_mode < 0) { - ATH5K_ERR(ah, -@@ -3669,7 +3662,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, st - ath5k_get_rate_pcal_data(ah, channel, &rate_info); - - /* Setup rate power table */ -- ath5k_setup_rate_powertable(ah, txpower, &rate_info, ee_mode); -+ ath5k_setup_rate_powertable(ah, ah->ah_txpower.txp_user_pwr, &rate_info, ee_mode); - - /* Write rate power table on hw */ - ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) | -@@ -3719,8 +3712,16 @@ ath5k_hw_set_txpower_limit(struct ath5k_ - { - ATH5K_DBG(ah, ATH5K_DEBUG_TXPOWER, - "changing txpower to %d\n", txpower); -+ if (txpower) { -+ ah->ah_txpower.txp_user_pwr = txpower; - -- return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower); -+ if (ah->ah_txpower.txp_user_pwr > AR5K_TUNE_MAX_TXPOWER) { -+ ATH5K_ERR(ah, "invalid tx power: %u\n", ah->ah_txpower.txp_user_pwr); -+ return -EINVAL; -+ } -+ } + unsigned int i; + u16 *rates; ++ s16 rate_idx_scaled = 0; + + /* max_pwr is power level we got from driver/user in 0.5dB + * units, switch to 0.25dB units so we can compare */ +@@ -3564,20 +3565,32 @@ ath5k_setup_rate_powertable(struct ath5k + for (i = 8; i <= 15; i++) + rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; + ++ /* Save min/max and current tx power for this channel ++ * in 0.25dB units. ++ * ++ * Note: We use rates[0] for current tx power because ++ * it covers most of the rates, in most cases. It's our ++ * tx power limit and what the user expects to see. */ ++ ah->ah_txpower.txp_min_pwr = 2 * rates[7]; ++ ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; ++ ++ /* Set max txpower for correct OFDM operation on all rates ++ * -that is the txpower for 54Mbit-, it's used for the PAPD ++ * gain probe and it's in 0.5dB units */ ++ ah->ah_txpower.txp_ofdm = rates[7]; + -+ return ath5k_hw_txpower(ah, ah->ah_current_channel); + /* Now that we have all rates setup use table offset to + * match the power range set by user with the power indices + * on PCDAC/PDADC table */ + for (i = 0; i < 16; i++) { +- rates[i] += ah->ah_txpower.txp_offset; ++ rate_idx_scaled = rates[i] + ah->ah_txpower.txp_offset; + /* Don't get out of bounds */ +- if (rates[i] > 63) +- rates[i] = 63; ++ if (rate_idx_scaled > 63) ++ rate_idx_scaled = 63; ++ if (rate_idx_scaled < 0) ++ rate_idx_scaled = 0; ++ rates[i] = rate_idx_scaled; + } +- +- /* Min/max in 0.25dB units */ +- ah->ah_txpower.txp_min_pwr = 2 * rates[7]; +- ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; +- ah->ah_txpower.txp_ofdm = rates[7]; } -@@ -3791,8 +3792,8 @@ ath5k_hw_phy_init(struct ath5k_hw *ah, s +@@ -3641,10 +3654,17 @@ ath5k_hw_txpower(struct ath5k_hw *ah, st + if (!ah->ah_txpower.txp_setup || + (channel->hw_value != curr_channel->hw_value) || + (channel->center_freq != curr_channel->center_freq)) { +- /* Reset TX power values */ ++ /* Reset TX power values but preserve requested ++ * tx power from above */ ++ int requested_txpower = ah->ah_txpower.txp_requested; ++ + memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); ++ ++ /* Restore TPC setting and requested tx power */ + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ++ ah->ah_txpower.txp_requested = requested_txpower; ++ + /* Calculate the powertable */ + ret = ath5k_setup_channel_powertable(ah, channel, + ee_mode, type); +@@ -3791,8 +3811,9 @@ ath5k_hw_phy_init(struct ath5k_hw *ah, s * RF buffer settings on 5211/5212+ so that we * properly set curve indices. */ - ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_cur_pwr ? - ah->ah_txpower.txp_cur_pwr / 2 : AR5K_TUNE_MAX_TXPOWER); -+ ret = ath5k_hw_txpower(ah, channel); -+ ++ ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_requested ? ++ ah->ah_txpower.txp_requested * 2 : ++ AR5K_TUNE_MAX_TXPOWER); if (ret) return ret; diff --git a/package/mac80211/patches/411-ath5k_allow_adhoc_and_ap.patch b/package/mac80211/patches/411-ath5k_allow_adhoc_and_ap.patch index 50c8e56e5b..39c95d2662 100644 --- a/package/mac80211/patches/411-ath5k_allow_adhoc_and_ap.patch +++ b/package/mac80211/patches/411-ath5k_allow_adhoc_and_ap.patch @@ -18,7 +18,7 @@ goto end; --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c -@@ -1875,7 +1875,7 @@ ath5k_beacon_send(struct ath5k_hw *ah) +@@ -1878,7 +1878,7 @@ ath5k_beacon_send(struct ath5k_hw *ah) } if ((ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs + @@ -27,7 +27,7 @@ ah->opmode == NL80211_IFTYPE_MESH_POINT) { u64 tsf = ath5k_hw_get_tsf64(ah); u32 tsftu = TSF_TO_TU(tsf); -@@ -1961,7 +1961,7 @@ ath5k_beacon_update_timers(struct ath5k_ +@@ -1964,7 +1964,7 @@ ath5k_beacon_update_timers(struct ath5k_ intval = ah->bintval & AR5K_BEACON_PERIOD; if (ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs @@ -36,7 +36,7 @@ intval /= ATH_BCBUF; /* staggered multi-bss beacons */ if (intval < 15) ATH5K_WARN(ah, "intval %u is too low, min 15\n", -@@ -2426,6 +2426,7 @@ static const struct ieee80211_iface_limi +@@ -2429,6 +2429,7 @@ static const struct ieee80211_iface_limi #ifdef CONFIG_MAC80211_MESH BIT(NL80211_IFTYPE_MESH_POINT) | #endif diff --git a/package/mac80211/patches/620-rt2x00-support-rt3352.patch b/package/mac80211/patches/620-rt2x00-support-rt3352.patch index 727eb24df6..b0641c9a1a 100644 --- a/package/mac80211/patches/620-rt2x00-support-rt3352.patch +++ b/package/mac80211/patches/620-rt2x00-support-rt3352.patch @@ -127,7 +127,7 @@ } static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev) -@@ -2893,11 +2970,15 @@ static int rt2800_init_registers(struct +@@ -2893,11 +2970,15 @@ static int rt2800_init_registers(struct if (rt2x00_rt(rt2x00dev, RT3071) || rt2x00_rt(rt2x00dev, RT3090) || rt2x00_rt(rt2x00dev, RT3290) ||