From: Felix Fietkau Date: Wed, 28 Nov 2007 02:36:06 +0000 (+0000) Subject: ps3: use readable video mode descriptions in readme X-Git-Tag: reboot~27602 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0795035b35dded7d3abaccba7b08953b11e8bf4a;p=openwrt%2Fstaging%2Fchunkeey.git ps3: use readable video mode descriptions in readme The ps3 video modes can be specified as readable names (eg "720p"), so use those instead. Signed-off-by: Jeremy Kerr SVN-Revision: 9605 --- diff --git a/target/linux/ps3/README b/target/linux/ps3/README index 8e75980b88..e97e48cf7c 100644 --- a/target/linux/ps3/README +++ b/target/linux/ps3/README @@ -11,10 +11,13 @@ in the PS3's menu. Depending on your monitor, you may need to alter the kernel command line options. The default is to autodetect, which should work on most -monitors. However, if you get a blank screen on boot, try changing -(through make kernel_menuconfig) "video=ps3fb:mode:0" to -"video=ps3fb:mode:1" for 480i, or "video=ps3fb:mode:3" for 720p. The -possible modes are: +monitors. However, if you get a blank screen on boot, or you'd like to +use a different resolution, you can specify a different video mode. + +To do this, 'make kernel_menuconfig' and go to 'Kernel Options' -> +'Initial kernel command string', and add a video= parameter - for +example "video=720p". You can also specify a vide mode explicitly, +for example "video=9" for 1080i at 50Hz. Possible mode ids are: Video mode ID: 0:auto mode diff --git a/target/linux/ps3/config-2.6.23 b/target/linux/ps3/config-2.6.23 index ab5d55b44c..bd8c0cae8f 100644 --- a/target/linux/ps3/config-2.6.23 +++ b/target/linux/ps3/config-2.6.23 @@ -222,7 +222,7 @@ CONFIG_ARCH_MEMORY_PROBE=y # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="root=/dev/ram0 video=ps3fb:mode:0" +CONFIG_CMDLINE="root=/dev/ram0 video=0" # CONFIG_PM is not set # CONFIG_SECCOMP is not set # CONFIG_WANT_DEVICE_TREE is not set