From: Michael Pratt <mcpratt@pm.me>
Date: Wed, 17 Mar 2021 23:07:46 +0000 (-0400)
Subject: ath79: improve factory.bin for some Senao devices
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=07723492e9acf5aea51eb8de3bcc4e36305c9e6b;p=openwrt%2Fstaging%2Fthess.git

ath79: improve factory.bin for some Senao devices

Some boards with firmware made with Senao SDK based on Linux 3.3
have the following lines in the OEM upgrade script at
/etc/fwupgrade.sh

	local append=""
	local CONF_TAR="/tmp/sysupgrade.tgz"
	[ -f "$CONF_TAR" ] && append="-j $CONF_TAR"

and

	\# check FWINFO filename
	[ -z $(ls FWINFO* | grep -i ${modelname}) ] && errcode="1"

This addition also prevents needing to factory reset after flashing
for some boards that also have these lines in the script

	\# Support downgrade but do default (Smart v2.x.x.x -> senaowrt v1.x.x.x)
	[ $(ls FWINFO* | grep -i ${modelname} | cut -d "-" -f4 | cut -c 2) -lt 2 ] && append=""

Signed-off-by: Michael Pratt <mcpratt@pm.me>
---

diff --git a/target/linux/ath79/image/common-senao.mk b/target/linux/ath79/image/common-senao.mk
index c9c14944c4..dda7da6776 100644
--- a/target/linux/ath79/image/common-senao.mk
+++ b/target/linux/ath79/image/common-senao.mk
@@ -1,6 +1,6 @@
 DEVICE_VARS += SENAO_IMGNAME
 
-# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
+# This needs to make OEM config archive 'sysupgrade.tgz' an empty file prior to OEM
 # sysupgrade, as otherwise it will implant the old configuration from
 # OEM firmware when writing rootfs from factory.bin
 # rootfs size and checksum is taken from a squashfs header
@@ -9,7 +9,9 @@ define Build/senao-tar-gz
 	-[ -f "$@" ] && \
 	mkdir -p $@.tmp && \
 	touch $@.tmp/failsafe.bin && \
+	touch $@.tmp/FWINFO-$(word 1,$(1))-$(REVISION) && \
 	echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
+	echo ': > /tmp/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
 	echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
 	echo -n $$(( $$(cat $@ | wc -c) / 4096 * 4096 )) > $@.len && \
 	dd if=$@ bs=$$(cat $@.len) count=1 | md5sum - | cut -d ' ' -f 1 > $@.md5 && \