From: Rafał Miłecki Date: Mon, 24 Oct 2016 15:03:48 +0000 (+0200) Subject: brcm47xx: bump kernel to 4.4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=06405df7a8da24b7d735b32454c7d3b1f2ebaabc;p=openwrt%2Fstaging%2Fzorun.git brcm47xx: bump kernel to 4.4 Kernel 4.4 was ready for brcm47xx for almost a year now but I kept postponing the bump due to problems with Linksys WRT300N v1.0. OpenWrt and LEDE with 4.4 were hanging at the booting with the: > Starting program at 0x80001000 (the last CFE message). This was a permanent state, "make distclean" wasn't helping, I spent hours debugging this and I was reliably reproducing the issue every time. I also reported it on linux-mips ML in the thread: > BCM4704 stopped booting with 4.4 (due to vmlinux size?) After ~month I started working on WRT300N again. I got hangs as expected every time I switched from 4.1 to 4.4. I started experimenting with: 1) TRX content (I tried dropping rootfs partition) 2) BZ_TEXT_START of lzma-loader 3) Flashing other variants of image: lzma compressed kernel (without a loader), gzip compressed one, uncompressed one. At some point I got rootfs-less image booting and after that I couldn't reproduce problem anymore, even with a complete firmware. It seems like hardware was in some locked/unstable state that got magically fixed. I have LEDE working now, tested it even with "make distclean", it seems we can bump kernel now. I'll keep testing it on WRT300N for some time. Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/brcm47xx/Makefile b/target/linux/brcm47xx/Makefile index cb6d39fa22..73b7bff4f3 100644 --- a/target/linux/brcm47xx/Makefile +++ b/target/linux/brcm47xx/Makefile @@ -13,7 +13,7 @@ FEATURES:=squashfs usb SUBTARGETS:=generic mips74k legacy MAINTAINER:=Hauke Mehrtens -KERNEL_PATCHVER:=4.1 +KERNEL_PATCHVER:=4.4 define Target/Description Build firmware images for Broadcom based BCM47xx/53xx routers with MIPS CPU, *not* ARM.