From: Sebastian Schaper <openwrt@sebastianschaper.net>
Date: Sun, 23 Apr 2023 13:40:34 +0000 (+0200)
Subject: ramips: fix green LED for D-Link DAP-X1860
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0601f7134d5f86f75997453eb30590b0f578cbfb;p=openwrt%2Fstaging%2Fdangole.git

ramips: fix green LED for D-Link DAP-X1860

It was found this device uses a single tri-color power/status LED
rather than individual red/orange LEDs, which also supports green.

Add GPIO for green color and use with `boot` and `running` aliases.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
---

diff --git a/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
index 1aa3f7c91b..818d2d8c41 100644
--- a/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
+++ b/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
@@ -15,9 +15,9 @@
 
 	aliases {
 		label-mac-device = &gmac0;
-		led-boot = &led_power_orange;
+		led-boot = &led_power_green;
 		led-failsafe = &led_power_red;
-		led-running = &led_power_orange;
+		led-running = &led_power_green;
 		led-upgrade = &led_power_red;
 	};
 
@@ -40,15 +40,20 @@
 	leds {
 		compatible = "gpio-leds";
 
+		led_power_green: power_green {
+			label = "green:power";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
 		led_power_red: power_red {
 			label = "red:power";
 			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 		};
 
-		led_power_orange: power_orange {
+		power_orange {
 			label = "orange:power";
 			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-			default-state = "on";
 		};
 
 		rssihigh {