From: Libin Yang Date: Wed, 3 Jul 2013 04:55:58 +0000 (-0300) Subject: [media] marvell-ccic: add MIPI support for marvell-ccic driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=05fed81625bf755cc67c5864cdfd18b69ea828d1;p=openwrt%2Fstaging%2Fblogic.git [media] marvell-ccic: add MIPI support for marvell-ccic driver This patch adds the MIPI support for marvell-ccic. Board driver should determine whether using MIPI or not. Signed-off-by: Albert Wang Signed-off-by: Libin Yang Acked-by: Jonathan Corbet Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c index 1f079ff33d4b..562845361246 100644 --- a/drivers/media/platform/marvell-ccic/cafe-driver.c +++ b/drivers/media/platform/marvell-ccic/cafe-driver.c @@ -399,7 +399,7 @@ static void cafe_ctlr_init(struct mcam_camera *mcam) } -static void cafe_ctlr_power_up(struct mcam_camera *mcam) +static int cafe_ctlr_power_up(struct mcam_camera *mcam) { /* * Part one of the sensor dance: turn the global @@ -414,6 +414,8 @@ static void cafe_ctlr_power_up(struct mcam_camera *mcam) */ mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */ mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0); + + return 0; } static void cafe_ctlr_power_down(struct mcam_camera *mcam) diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c index 0821ed08c122..a256804ec40c 100644 --- a/drivers/media/platform/marvell-ccic/mcam-core.c +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -253,6 +254,45 @@ static void mcam_ctlr_stop(struct mcam_camera *cam) mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); } +static void mcam_enable_mipi(struct mcam_camera *mcam) +{ + /* Using MIPI mode and enable MIPI */ + cam_dbg(mcam, "camera: DPHY3=0x%x, DPHY5=0x%x, DPHY6=0x%x\n", + mcam->dphy[0], mcam->dphy[1], mcam->dphy[2]); + mcam_reg_write(mcam, REG_CSI2_DPHY3, mcam->dphy[0]); + mcam_reg_write(mcam, REG_CSI2_DPHY5, mcam->dphy[1]); + mcam_reg_write(mcam, REG_CSI2_DPHY6, mcam->dphy[2]); + + if (!mcam->mipi_enabled) { + if (mcam->lane > 4 || mcam->lane <= 0) { + cam_warn(mcam, "lane number error\n"); + mcam->lane = 1; /* set the default value */ + } + /* + * 0x41 actives 1 lane + * 0x43 actives 2 lanes + * 0x45 actives 3 lanes (never happen) + * 0x47 actives 4 lanes + */ + mcam_reg_write(mcam, REG_CSI2_CTRL0, + CSI2_C0_MIPI_EN | CSI2_C0_ACT_LANE(mcam->lane)); + mcam_reg_write(mcam, REG_CLKCTRL, + (mcam->mclk_src << 29) | mcam->mclk_div); + + mcam->mipi_enabled = true; + } +} + +static void mcam_disable_mipi(struct mcam_camera *mcam) +{ + /* Using Parallel mode or disable MIPI */ + mcam_reg_write(mcam, REG_CSI2_CTRL0, 0x0); + mcam_reg_write(mcam, REG_CSI2_DPHY3, 0x0); + mcam_reg_write(mcam, REG_CSI2_DPHY5, 0x0); + mcam_reg_write(mcam, REG_CSI2_DPHY6, 0x0); + mcam->mipi_enabled = false; +} + /* ------------------------------------------------------------------- */ #ifdef MCAM_MODE_VMALLOC @@ -656,6 +696,13 @@ static void mcam_ctlr_image(struct mcam_camera *cam) */ mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, C0_SIFM_MASK); + + /* + * This field controls the generation of EOF(DVP only) + */ + if (cam->bus_type != V4L2_MBUS_CSI2) + mcam_reg_set_bit(cam, REG_CTRL0, + C0_EOF_VSYNC | C0_VEDGE_CTRL); } @@ -753,15 +800,21 @@ static void mcam_ctlr_stop_dma(struct mcam_camera *cam) /* * Power up and down. */ -static void mcam_ctlr_power_up(struct mcam_camera *cam) +static int mcam_ctlr_power_up(struct mcam_camera *cam) { unsigned long flags; + int ret; spin_lock_irqsave(&cam->dev_lock, flags); - cam->plat_power_up(cam); + ret = cam->plat_power_up(cam); + if (ret) { + spin_unlock_irqrestore(&cam->dev_lock, flags); + return ret; + } mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); spin_unlock_irqrestore(&cam->dev_lock, flags); msleep(5); /* Just to be sure */ + return 0; } static void mcam_ctlr_power_down(struct mcam_camera *cam) @@ -869,6 +922,17 @@ static int mcam_read_setup(struct mcam_camera *cam) spin_lock_irqsave(&cam->dev_lock, flags); clear_bit(CF_DMA_ACTIVE, &cam->flags); mcam_reset_buffers(cam); + /* + * Update CSI2_DPHY value + */ + if (cam->calc_dphy) + cam->calc_dphy(cam); + cam_dbg(cam, "camera: DPHY sets: dphy3=0x%x, dphy5=0x%x, dphy6=0x%x\n", + cam->dphy[0], cam->dphy[1], cam->dphy[2]); + if (cam->bus_type == V4L2_MBUS_CSI2) + mcam_enable_mipi(cam); + else + mcam_disable_mipi(cam); mcam_ctlr_irq_enable(cam); cam->state = S_STREAMING; if (!test_bit(CF_SG_RESTART, &cam->flags)) @@ -1475,7 +1539,9 @@ static int mcam_v4l_open(struct file *filp) ret = mcam_setup_vb2(cam); if (ret) goto out; - mcam_ctlr_power_up(cam); + ret = mcam_ctlr_power_up(cam); + if (ret) + goto out; __mcam_cam_reset(cam); mcam_set_config_needed(cam, 1); } @@ -1498,10 +1564,12 @@ static int mcam_v4l_release(struct file *filp) if (cam->users == 0) { mcam_ctlr_stop_dma(cam); mcam_cleanup_vb2(cam); + mcam_disable_mipi(cam); mcam_ctlr_power_down(cam); if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read) mcam_free_dma_bufs(cam); } + mutex_unlock(&cam->s_mutex); return 0; } @@ -1787,7 +1855,11 @@ int mccic_resume(struct mcam_camera *cam) mutex_lock(&cam->s_mutex); if (cam->users > 0) { - mcam_ctlr_power_up(cam); + ret = mcam_ctlr_power_up(cam); + if (ret) { + mutex_unlock(&cam->s_mutex); + return ret; + } __mcam_cam_reset(cam); } else { mcam_ctlr_power_down(cam); diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h index 520c8ded9443..74394325dc4f 100644 --- a/drivers/media/platform/marvell-ccic/mcam-core.h +++ b/drivers/media/platform/marvell-ccic/mcam-core.h @@ -108,11 +108,28 @@ struct mcam_camera { short int clock_speed; /* Sensor clock speed, default 30 */ short int use_smbus; /* SMBUS or straight I2c? */ enum mcam_buffer_mode buffer_mode; + + int mclk_min; /* The minimal value of mclk */ + int mclk_src; /* which clock source the mclk derives from */ + int mclk_div; /* Clock Divider Value for MCLK */ + + enum v4l2_mbus_type bus_type; + /* MIPI support */ + /* The dphy config value, allocated in board file + * dphy[0]: DPHY3 + * dphy[1]: DPHY5 + * dphy[2]: DPHY6 + */ + int *dphy; + bool mipi_enabled; /* flag whether mipi is enabled already */ + int lane; /* lane number */ + /* * Callbacks from the core to the platform code. */ - void (*plat_power_up) (struct mcam_camera *cam); + int (*plat_power_up) (struct mcam_camera *cam); void (*plat_power_down) (struct mcam_camera *cam); + void (*calc_dphy) (struct mcam_camera *cam); /* * Everything below here is private to the mcam core and @@ -225,6 +242,17 @@ int mccic_resume(struct mcam_camera *cam); #define REG_Y0BAR 0x00 #define REG_Y1BAR 0x04 #define REG_Y2BAR 0x08 + +/* + * register definitions for MIPI support + */ +#define REG_CSI2_CTRL0 0x100 +#define CSI2_C0_MIPI_EN (0x1 << 0) +#define CSI2_C0_ACT_LANE(n) ((n-1) << 1) +#define REG_CSI2_DPHY3 0x12c +#define REG_CSI2_DPHY5 0x134 +#define REG_CSI2_DPHY6 0x138 + /* ... */ #define REG_IMGPITCH 0x24 /* Image pitch register */ @@ -293,13 +321,16 @@ int mccic_resume(struct mcam_camera *cam); #define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */ #define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */ /* Bayer bits 18,19 if needed */ +#define C0_EOF_VSYNC 0x00400000 /* Generate EOF by VSYNC */ +#define C0_VEDGE_CTRL 0x00800000 /* Detect falling edge of VSYNC */ #define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */ #define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */ #define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */ #define C0_DOWNSCALE 0x08000000 /* Enable downscaler */ -#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ +/* SIFMODE */ #define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */ -#define CO_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ +#define C0_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ +#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ /* Bits below C1_444ALPHA are not present in Cafe */ #define REG_CTRL1 0x40 /* Control 1 */ diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index a634888271cd..bd03668e7f0e 100644 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "mcam-core.h" @@ -38,6 +39,7 @@ struct mmp_camera { struct platform_device *pdev; struct mcam_camera mcam; struct list_head devlist; + struct clk *mipi_clk; int irq; }; @@ -112,10 +114,17 @@ static void mmpcam_power_up_ctlr(struct mmp_camera *cam) mdelay(1); } -static void mmpcam_power_up(struct mcam_camera *mcam) +static int mmpcam_power_up(struct mcam_camera *mcam) { struct mmp_camera *cam = mcam_to_cam(mcam); struct mmp_camera_platform_data *pdata; + + if (mcam->bus_type == V4L2_MBUS_CSI2) { + cam->mipi_clk = devm_clk_get(mcam->dev, "mipi"); + if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0)) + return PTR_ERR(cam->mipi_clk); + } + /* * Turn on power and clocks to the controller. */ @@ -132,6 +141,7 @@ static void mmpcam_power_up(struct mcam_camera *mcam) mdelay(5); gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */ mdelay(5); + return 0; } static void mmpcam_power_down(struct mcam_camera *mcam) @@ -149,8 +159,109 @@ static void mmpcam_power_down(struct mcam_camera *mcam) pdata = cam->pdev->dev.platform_data; gpio_set_value(pdata->sensor_power_gpio, 0); gpio_set_value(pdata->sensor_reset_gpio, 0); + + if (mcam->bus_type == V4L2_MBUS_CSI2 && !IS_ERR(cam->mipi_clk)) { + if (cam->mipi_clk) + devm_clk_put(mcam->dev, cam->mipi_clk); + cam->mipi_clk = NULL; + } } +/* + * calc the dphy register values + * There are three dphy registers being used. + * dphy[0] - CSI2_DPHY3 + * dphy[1] - CSI2_DPHY5 + * dphy[2] - CSI2_DPHY6 + * CSI2_DPHY3 and CSI2_DPHY6 can be set with a default value + * or be calculated dynamically + */ +void mmpcam_calc_dphy(struct mcam_camera *mcam) +{ + struct mmp_camera *cam = mcam_to_cam(mcam); + struct mmp_camera_platform_data *pdata = cam->pdev->dev.platform_data; + struct device *dev = &cam->pdev->dev; + unsigned long tx_clk_esc; + + /* + * If CSI2_DPHY3 is calculated dynamically, + * pdata->lane_clk should be already set + * either in the board driver statically + * or in the sensor driver dynamically. + */ + /* + * dphy[0] - CSI2_DPHY3: + * bit 0 ~ bit 7: HS Term Enable. + * defines the time that the DPHY + * wait before enabling the data + * lane termination after detecting + * that the sensor has driven the data + * lanes to the LP00 bridge state. + * The value is calculated by: + * (Max T(D_TERM_EN)/Period(DDR)) - 1 + * bit 8 ~ bit 15: HS_SETTLE + * Time interval during which the HS + * receiver shall ignore any Data Lane + * HS transistions. + * The vaule has been calibrated on + * different boards. It seems to work well. + * + * More detail please refer + * MIPI Alliance Spectification for D-PHY + * document for explanation of HS-SETTLE + * and D-TERM-EN. + */ + switch (pdata->dphy3_algo) { + case DPHY3_ALGO_PXA910: + /* + * Calculate CSI2_DPHY3 algo for PXA910 + */ + pdata->dphy[0] = + (((1 + (pdata->lane_clk * 80) / 1000) & 0xff) << 8) + | (1 + pdata->lane_clk * 35 / 1000); + break; + case DPHY3_ALGO_PXA2128: + /* + * Calculate CSI2_DPHY3 algo for PXA2128 + */ + pdata->dphy[0] = + (((2 + (pdata->lane_clk * 110) / 1000) & 0xff) << 8) + | (1 + pdata->lane_clk * 35 / 1000); + break; + default: + /* + * Use default CSI2_DPHY3 value for PXA688/PXA988 + */ + dev_dbg(dev, "camera: use the default CSI2_DPHY3 value\n"); + } + + /* + * mipi_clk will never be changed, it is a fixed value on MMP + */ + if (IS_ERR(cam->mipi_clk)) + return; + + /* get the escape clk, this is hard coded */ + tx_clk_esc = (clk_get_rate(cam->mipi_clk) / 1000000) / 12; + + /* + * dphy[2] - CSI2_DPHY6: + * bit 0 ~ bit 7: CK Term Enable + * Time for the Clock Lane receiver to enable the HS line + * termination. The value is calculated similarly with + * HS Term Enable + * bit 8 ~ bit 15: CK Settle + * Time interval during which the HS receiver shall ignore + * any Clock Lane HS transitions. + * The value is calibrated on the boards. + */ + pdata->dphy[2] = + ((((534 * tx_clk_esc) / 2000 - 1) & 0xff) << 8) + | (((38 * tx_clk_esc) / 1000 - 1) & 0xff); + + dev_dbg(dev, "camera: DPHY sets: dphy3=0x%x, dphy5=0x%x, dphy6=0x%x\n", + pdata->dphy[0], pdata->dphy[1], pdata->dphy[2]); +} static irqreturn_t mmpcam_irq(int irq, void *data) { @@ -173,17 +284,30 @@ static int mmpcam_probe(struct platform_device *pdev) struct mmp_camera_platform_data *pdata; int ret; + pdata = pdev->dev.platform_data; + if (!pdata) + return -ENODEV; + cam = kzalloc(sizeof(*cam), GFP_KERNEL); if (cam == NULL) return -ENOMEM; cam->pdev = pdev; + cam->mipi_clk = NULL; INIT_LIST_HEAD(&cam->devlist); mcam = &cam->mcam; mcam->plat_power_up = mmpcam_power_up; mcam->plat_power_down = mmpcam_power_down; + mcam->calc_dphy = mmpcam_calc_dphy; mcam->dev = &pdev->dev; mcam->use_smbus = 0; + mcam->mclk_min = pdata->mclk_min; + mcam->mclk_src = pdata->mclk_src; + mcam->mclk_div = pdata->mclk_div; + mcam->bus_type = pdata->bus_type; + mcam->dphy = pdata->dphy; + mcam->mipi_enabled = false; + mcam->lane = pdata->lane; mcam->chip_id = MCAM_ARMADA610; mcam->buffer_mode = B_DMA_sg; spin_lock_init(&mcam->dev_lock); @@ -223,7 +347,6 @@ static int mmpcam_probe(struct platform_device *pdev) * Find the i2c adapter. This assumes, of course, that the * i2c bus is already up and functioning. */ - pdata = pdev->dev.platform_data; mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device); if (mcam->i2c_adapter == NULL) { ret = -ENODEV; @@ -250,10 +373,12 @@ static int mmpcam_probe(struct platform_device *pdev) /* * Power the device up and hand it off to the core. */ - mmpcam_power_up(mcam); - ret = mccic_register(mcam); + ret = mmpcam_power_up(mcam); if (ret) goto out_gpio2; + ret = mccic_register(mcam); + if (ret) + goto out_pwdn; /* * Finally, set up our IRQ now that the core is ready to * deal with it. @@ -273,8 +398,9 @@ static int mmpcam_probe(struct platform_device *pdev) out_unregister: mccic_shutdown(mcam); -out_gpio2: +out_pwdn: mmpcam_power_down(mcam); +out_gpio2: gpio_free(pdata->sensor_reset_gpio); out_gpio: gpio_free(pdata->sensor_power_gpio);