From: David Bauer Date: Fri, 10 Jul 2020 15:38:36 +0000 (+0200) Subject: uboot-rockchip: add NanoPi R2S support X-Git-Tag: v21.02.0-rc1~2086 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=04f06787f1c0f1d89f6b8c71430d0d0bbb62ffa5;p=openwrt%2Fopenwrt.git uboot-rockchip: add NanoPi R2S support Add support for the FriendlyARM NanoPi R2S. Signed-off-by: David Bauer --- diff --git a/package/boot/uboot-rockchip/Makefile b/package/boot/uboot-rockchip/Makefile index 97f651fbbf..e5c49d00bb 100644 --- a/package/boot/uboot-rockchip/Makefile +++ b/package/boot/uboot-rockchip/Makefile @@ -20,6 +20,23 @@ define U-Boot/Default HIDDEN:=1 endef + +# RK3328 boards + +define U-Boot/nanopi-r2s-rk3328 + BUILD_SUBTARGET:=armv8 + NAME:=NanoPi R2S + BUILD_DEVICES:= \ + friendlyarm_nanopi-r2s + DEPENDS:=+PACKAGE_u-boot-nanopi-r2s-rk3328:arm-trusted-firmware-rockchip + PKG_BUILD_DEPENDS:=arm-trusted-firmware-rockchip + ATF:=rk3328_bl31.elf + OF_PLATDATA:=$(1) +endef + + +# RK3399 boards + define U-Boot/rockpro64-rk3399 BUILD_SUBTARGET:=armv8 NAME:=RockPro64 @@ -27,19 +44,29 @@ define U-Boot/rockpro64-rk3399 pine64_rockpro64 DEPENDS:=+PACKAGE_u-boot-rockpro64-rk3399:arm-trusted-firmware-rockchip PKG_BUILD_DEPENDS:=arm-trusted-firmware-rockchip + ATF:=rk3399_bl31.elf endef UBOOT_TARGETS := \ - rockpro64-rk3399 + rockpro64-rk3399 \ + nanopi-r2s-rk3328 UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes UBOOT_MAKE_FLAGS += \ - BL31=$(STAGING_DIR_IMAGE)/rk3399_bl31.elf + BL31=$(STAGING_DIR_IMAGE)/$(ATF) define Build/Configure $(call Build/Configure/U-Boot) +ifneq ($(OF_PLATDATA),) + mkdir -p $(PKG_BUILD_DIR)/tpl/dts + mkdir -p $(PKG_BUILD_DIR)/include/generated + + $(CP) $(PKG_BUILD_DIR)/of-platdata/$(OF_PLATDATA)/dt-platdata.c $(PKG_BUILD_DIR)/tpl/dts/dt-platdata.c + $(CP) $(PKG_BUILD_DIR)/of-platdata/$(OF_PLATDATA)/dt-structs-gen.h $(PKG_BUILD_DIR)/include/generated/dt-structs-gen.h +endif + $(SED) 's#CONFIG_MKIMAGE_DTC_PATH=.*#CONFIG_MKIMAGE_DTC_PATH="$(PKG_BUILD_DIR)/scripts/dtc/dtc"#g' $(PKG_BUILD_DIR)/.config echo 'CONFIG_IDENT_STRING=" OpenWrt"' >> $(PKG_BUILD_DIR)/.config endef diff --git a/package/boot/uboot-rockchip/patches/002-spl-remove-dtoc-of-pdata-generation.patch b/package/boot/uboot-rockchip/patches/002-spl-remove-dtoc-of-pdata-generation.patch new file mode 100644 index 0000000000..4161c46ce2 --- /dev/null +++ b/package/boot/uboot-rockchip/patches/002-spl-remove-dtoc-of-pdata-generation.patch @@ -0,0 +1,32 @@ +From 55273cf6079ddd3b006da69f0113c2c66c03f17e Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Tue, 14 Jul 2020 22:44:22 +0200 +Subject: [PATCH] spl: remove dtoc of-pdata generation + +Remove the dtoc of-pdata generation. This generation is dependant on +libpython-dev. As OpenWrt does not ship with this dependency, use +pre-generated pdata files and remove the generation from the +build-process. + +This only affects RK3328 boards. + +Signed-off-by: David Bauer +--- + scripts/Makefile.spl | 6 ------ + 1 file changed, 6 deletions(-) + +--- a/scripts/Makefile.spl ++++ b/scripts/Makefile.spl +@@ -320,12 +320,6 @@ PHONY += dts_dir + dts_dir: + $(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts) + +-include/generated/dt-structs-gen.h: $(obj)/$(SPL_BIN).dtb dts_dir FORCE +- $(call if_changed,dtoch) +- +-$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir FORCE +- $(call if_changed,dtocc) +- + ifdef CONFIG_SAMSUNG + ifdef CONFIG_VAR_SIZE_SPL + VAR_SIZE_PARAM = --vs diff --git a/package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch b/package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch new file mode 100644 index 0000000000..bc65fb69ef --- /dev/null +++ b/package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch @@ -0,0 +1,530 @@ +From 67f4c228c2bf515386cd54073104dc2e6eae85ea Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Fri, 10 Jul 2020 14:58:30 +0200 +Subject: [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S + +This adds support for the NanoPi R2S from FriendlyArm. + +Rockchip RK3328 SoC +1GB DDR4 RAM +Gigabit Ethernet (WAN) +Gigabit Ethernet (USB3) (LAN) +USB 2.0 Host Port +MicroSD slot +Reset button +WAN - LAN - SYS LED + +Signed-off-by: David Bauer +--- + arch/arm/dts/Makefile | 1 + + arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi | 34 +++ + arch/arm/dts/rk3328-nanopi-r2s.dts | 334 +++++++++++++++++++++ + board/rockchip/evb_rk3328/MAINTAINERS | 7 + + configs/nanopi-r2s-rk3328_defconfig | 99 ++++++ + 5 files changed, 475 insertions(+) + create mode 100644 arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi + create mode 100644 arch/arm/dts/rk3328-nanopi-r2s.dts + create mode 100644 configs/nanopi-r2s-rk3328_defconfig + +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -106,6 +106,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \ + + dtb-$(CONFIG_ROCKCHIP_RK3328) += \ + rk3328-evb.dtb \ ++ rk3328-nanopi-r2s.dtb \ + rk3328-roc-cc.dtb \ + rk3328-rock64.dtb \ + rk3328-rock-pi-e.dtb +--- /dev/null ++++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi +@@ -0,0 +1,34 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd ++ * (C) Copyright 2020 David Bauer ++ */ ++ ++#include "rk3328-u-boot.dtsi" ++#include "rk3328-sdram-ddr4-666.dtsi" ++/ { ++ chosen { ++ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc; ++ }; ++}; ++ ++&gpio0 { ++ u-boot,dm-spl; ++}; ++ ++&pinctrl { ++ u-boot,dm-spl; ++}; ++ ++&sdmmc0m1_gpio { ++ u-boot,dm-spl; ++}; ++ ++&pcfg_pull_up_4ma { ++ u-boot,dm-spl; ++}; ++ ++/* Need this and all the pinctrl/gpio stuff above to set pinmux */ ++&vcc_sd { ++ u-boot,dm-spl; ++}; +--- /dev/null ++++ b/arch/arm/dts/rk3328-nanopi-r2s.dts +@@ -0,0 +1,334 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (c) 2020 David Bauer ++ */ ++ ++/dts-v1/; ++ ++#include ++#include ++#include "rk3328.dtsi" ++ ++/ { ++ model = "FriendlyARM NanoPi R2S"; ++ compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328"; ++ ++ chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ gmac_clkin: external-gmac-clock { ++ compatible = "fixed-clock"; ++ clock-frequency = <125000000>; ++ clock-output-names = "gmac_clkin"; ++ #clock-cells = <0>; ++ }; ++ ++ vcc_sd: sdmmc-regulator { ++ compatible = "regulator-fixed"; ++ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc0m1_gpio>; ++ regulator-name = "vcc_sd"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc_io>; ++ }; ++ ++ vcc_sdio: sdmmcio-regulator { ++ compatible = "regulator-gpio"; ++ gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ states = <1800000 0x1 ++ 3300000 0x0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_vcc_pin>; ++ regulator-always-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc_sdio"; ++ regulator-settling-time-us = <5000>; ++ regulator-type = "voltage"; ++ vin-supply = <&vcc_io>; ++ }; ++ ++ vcc_sys: vcc-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pins>; ++ ++ sys { ++ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; ++ label = "nanopi-r2s:red:sys"; ++ }; ++ ++ lan { ++ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; ++ label = "nanopi-r2s:green:lan"; ++ }; ++ ++ wan { ++ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; ++ label = "nanopi-r2s:green:wan"; ++ }; ++ }; ++ ++ gpio_keys { ++ compatible = "gpio-keys-polled"; ++ poll-interval = <100>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&button_pins>; ++ ++ reset { ++ label = "Reset Button"; ++ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; ++ linux,code = ; ++ debounce-interval = <50>; ++ }; ++ }; ++}; ++ ++&cpu0 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&cpu2 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&cpu3 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&gmac2io { ++ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; ++ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; ++ clock_in_out = "input"; ++ phy-supply = <&vcc_io>; ++ phy-handle = <&rtl8211e>; ++ phy-mode = "rgmii"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rgmiim1_pins>; ++ snps,aal; ++ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; ++ snps,reset-active-low; ++ snps,reset-delays-us = <0 10000 50000>; ++ tx_delay = <0x24>; ++ rx_delay = <0x18>; ++ status = "okay"; ++ ++ mdio { ++ compatible = "snps,dwmac-mdio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rtl8211e: ethernet-phy@0 { ++ reg = <0>; ++ }; ++ }; ++}; ++ ++&i2c1 { ++ status = "okay"; ++ ++ rk805: rk805@18 { ++ compatible = "rockchip,rk805"; ++ reg = <0x18>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <6 IRQ_TYPE_LEVEL_LOW>; ++ #clock-cells = <1>; ++ clock-output-names = "xin32k", "rk805-clkout2"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int_l>; ++ rockchip,system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc_sys>; ++ vcc2-supply = <&vcc_sys>; ++ vcc3-supply = <&vcc_sys>; ++ vcc4-supply = <&vcc_sys>; ++ vcc5-supply = <&vcc_io>; ++ vcc6-supply = <&vcc_sys>; ++ ++ regulators { ++ vdd_logic: DCDC_REG1 { ++ regulator-name = "vdd_logic"; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1450000>; ++ regulator-ramp-delay = <12500>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1000000>; ++ }; ++ }; ++ ++ vdd_arm: DCDC_REG2 { ++ regulator-name = "vdd_arm"; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1450000>; ++ regulator-ramp-delay = <12500>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <950000>; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vcc_io: DCDC_REG4 { ++ regulator-name = "vcc_io"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3300000>; ++ }; ++ }; ++ ++ vcc_18: LDO_REG1 { ++ regulator-name = "vcc_18"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc18_emmc: LDO_REG2 { ++ regulator-name = "vcc18_emmc"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vdd_10: LDO_REG3 { ++ regulator-name = "vdd_10"; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1000000>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1000000>; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&io_domains { ++ status = "okay"; ++ ++ vccio1-supply = <&vcc_io>; ++ vccio2-supply = <&vcc18_emmc>; ++ vccio3-supply = <&vcc_sdio>; ++ vccio4-supply = <&vcc_18>; ++ vccio5-supply = <&vcc_io>; ++ vccio6-supply = <&vcc_io>; ++ pmuio-supply = <&vcc_io>; ++}; ++ ++&pinctrl { ++ leds { ++ led_pins: led-pins { ++ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>, ++ <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>, ++ <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ button { ++ button_pins: button-pins { ++ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pmic { ++ pmic_int_l: pmic-int-l { ++ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ sd { ++ sdio_vcc_pin: sdio-vcc-pin { ++ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++}; ++ ++&sdmmc { ++ bus-width = <4>; ++ cap-mmc-highspeed; ++ cap-sd-highspeed; ++ disable-wp; ++ max-frequency = <150000000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; ++ vmmc-supply = <&vcc_sd>; ++ vqmmc-supply = <&vcc_sdio>; ++ status = "okay"; ++}; ++ ++&tsadc { ++ rockchip,hw-tshut-mode = <0>; ++ rockchip,hw-tshut-polarity = <0>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&u2phy { ++ status = "okay"; ++ ++ u2phy_host: host-port { ++ status = "okay"; ++ }; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; +--- a/board/rockchip/evb_rk3328/MAINTAINERS ++++ b/board/rockchip/evb_rk3328/MAINTAINERS +@@ -5,6 +5,13 @@ F: board/rockchip/evb_rk3328 + F: include/configs/evb_rk3328.h + F: configs/evb-rk3328_defconfig + ++NANOPI-R2S-RK3328 ++M: David Bauer ++S: Maintained ++F: configs/nanopi-r2s-rk3328_defconfig ++F: arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi ++F: arch/arm/dts/rk3328-nanopi-r2s.dts ++ + ROC-RK3328-CC + M: Loic Devulder + M: Chen-Yu Tsai +--- /dev/null ++++ b/configs/nanopi-r2s-rk3328_defconfig +@@ -0,0 +1,99 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_ROCKCHIP=y ++CONFIG_SYS_TEXT_BASE=0x00200000 ++CONFIG_SPL_GPIO_SUPPORT=y ++CONFIG_ENV_OFFSET=0x3F8000 ++CONFIG_ROCKCHIP_RK3328=y ++CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y ++CONFIG_TPL_LIBCOMMON_SUPPORT=y ++CONFIG_TPL_LIBGENERIC_SUPPORT=y ++CONFIG_SPL_DRIVERS_MISC_SUPPORT=y ++CONFIG_SPL_STACK_R_ADDR=0x600000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEBUG_UART_BASE=0xFF130000 ++CONFIG_DEBUG_UART_CLOCK=24000000 ++CONFIG_SMBIOS_PRODUCT_NAME="nanopi_r2s_rk3328" ++CONFIG_DEBUG_UART=y ++CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 ++# CONFIG_ANDROID_BOOT_IMAGE is not set ++CONFIG_FIT=y ++CONFIG_FIT_VERBOSE=y ++CONFIG_SPL_LOAD_FIT=y ++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2s.dtb" ++CONFIG_MISC_INIT_R=y ++# CONFIG_DISPLAY_CPUINFO is not set ++CONFIG_DISPLAY_BOARDINFO_LATE=y ++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set ++CONFIG_TPL_SYS_MALLOC_SIMPLE=y ++CONFIG_SPL_STACK_R=y ++CONFIG_SPL_I2C_SUPPORT=y ++CONFIG_SPL_POWER_SUPPORT=y ++CONFIG_SPL_ATF=y ++CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y ++CONFIG_CMD_BOOTZ=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_USB=y ++# CONFIG_CMD_SETEXPR is not set ++CONFIG_CMD_TIME=y ++CONFIG_SPL_OF_CONTROL=y ++CONFIG_TPL_OF_CONTROL=y ++CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2s" ++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" ++CONFIG_TPL_OF_PLATDATA=y ++CONFIG_ENV_IS_IN_MMC=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_TPL_DM=y ++CONFIG_REGMAP=y ++CONFIG_SPL_REGMAP=y ++CONFIG_TPL_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_SPL_SYSCON=y ++CONFIG_TPL_SYSCON=y ++CONFIG_CLK=y ++CONFIG_SPL_CLK=y ++CONFIG_FASTBOOT_BUF_ADDR=0x800800 ++CONFIG_FASTBOOT_CMD_OEM_FORMAT=y ++CONFIG_ROCKCHIP_GPIO=y ++CONFIG_SYS_I2C_ROCKCHIP=y ++CONFIG_MMC_DW=y ++CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_SF_DEFAULT_SPEED=20000000 ++CONFIG_DM_ETH=y ++CONFIG_ETH_DESIGNWARE=y ++CONFIG_GMAC_ROCKCHIP=y ++CONFIG_PINCTRL=y ++CONFIG_SPL_PINCTRL=y ++CONFIG_DM_PMIC=y ++CONFIG_PMIC_RK8XX=y ++CONFIG_SPL_DM_REGULATOR=y ++CONFIG_REGULATOR_PWM=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_SPL_DM_REGULATOR_FIXED=y ++CONFIG_REGULATOR_RK8XX=y ++CONFIG_PWM_ROCKCHIP=y ++CONFIG_RAM=y ++CONFIG_SPL_RAM=y ++CONFIG_TPL_RAM=y ++CONFIG_DM_RESET=y ++CONFIG_BAUDRATE=1500000 ++CONFIG_DEBUG_UART_SHIFT=2 ++CONFIG_SYSRESET=y ++# CONFIG_TPL_SYSRESET is not set ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_DWC3=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_GENERIC=y ++CONFIG_USB_OHCI_HCD=y ++CONFIG_USB_OHCI_GENERIC=y ++CONFIG_USB_DWC2=y ++CONFIG_USB_DWC3=y ++# CONFIG_USB_DWC3_GADGET is not set ++CONFIG_USB_GADGET=y ++CONFIG_USB_GADGET_DWC2_OTG=y ++CONFIG_SPL_TINY_MEMSET=y ++CONFIG_TPL_TINY_MEMSET=y ++CONFIG_ERRNO_STR=y ++CONFIG_SMBIOS_MANUFACTURER="pine64" diff --git a/package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-platdata.c b/package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-platdata.c new file mode 100644 index 0000000000..fa42c1a760 --- /dev/null +++ b/package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-platdata.c @@ -0,0 +1,149 @@ +/* + * DO NOT MODIFY + * + * This file was generated by dtoc from a .dtb (device tree binary) file. + */ + +#include +#include +#include + +static const struct dtd_rockchip_rk3328_grf dtv_syscon_at_ff100000 = { + .reg = {0xff100000, 0x1000}, +}; +U_BOOT_DEVICE(syscon_at_ff100000) = { + .name = "rockchip_rk3328_grf", + .platdata = &dtv_syscon_at_ff100000, + .platdata_size = sizeof(dtv_syscon_at_ff100000), +}; + +static const struct dtd_rockchip_rk3328_cru dtv_clock_controller_at_ff440000 = { + .reg = {0xff440000, 0x1000}, + .rockchip_grf = 0x3a, +}; +U_BOOT_DEVICE(clock_controller_at_ff440000) = { + .name = "rockchip_rk3328_cru", + .platdata = &dtv_clock_controller_at_ff440000, + .platdata_size = sizeof(dtv_clock_controller_at_ff440000), +}; + +static const struct dtd_rockchip_rk3328_uart dtv_serial_at_ff130000 = { + .clock_frequency = 0x16e3600, + .clocks = { + {&dtv_clock_controller_at_ff440000, {40}}, + {&dtv_clock_controller_at_ff440000, {212}},}, + .dma_names = {"tx", "rx"}, + .dmas = {0x10, 0x6, 0x10, 0x7}, + .interrupts = {0x0, 0x39, 0x4}, + .pinctrl_0 = 0x26, + .pinctrl_names = "default", + .reg = {0xff130000, 0x100}, + .reg_io_width = 0x4, + .reg_shift = 0x2, +}; +U_BOOT_DEVICE(serial_at_ff130000) = { + .name = "rockchip_rk3328_uart", + .platdata = &dtv_serial_at_ff130000, + .platdata_size = sizeof(dtv_serial_at_ff130000), +}; + +static const struct dtd_rockchip_rk3328_dw_mshc dtv_mmc_at_ff500000 = { + .bus_width = 0x4, + .cap_mmc_highspeed = true, + .cap_sd_highspeed = true, + .clocks = { + {&dtv_clock_controller_at_ff440000, {317}}, + {&dtv_clock_controller_at_ff440000, {33}}, + {&dtv_clock_controller_at_ff440000, {74}}, + {&dtv_clock_controller_at_ff440000, {78}},}, + .disable_wp = true, + .fifo_depth = 0x100, + .interrupts = {0x0, 0xc, 0x4}, + .max_frequency = 0x8f0d180, + .pinctrl_0 = {0x47, 0x48, 0x49, 0x4a}, + .pinctrl_names = "default", + .reg = {0xff500000, 0x4000}, + .u_boot_spl_fifo_mode = true, + .vmmc_supply = 0x4b, + .vqmmc_supply = 0x1e, +}; +U_BOOT_DEVICE(mmc_at_ff500000) = { + .name = "rockchip_rk3328_dw_mshc", + .platdata = &dtv_mmc_at_ff500000, + .platdata_size = sizeof(dtv_mmc_at_ff500000), +}; + +static const struct dtd_rockchip_rk3328_pinctrl dtv_pinctrl = { + .ranges = true, + .rockchip_grf = 0x3a, +}; +U_BOOT_DEVICE(pinctrl) = { + .name = "rockchip_rk3328_pinctrl", + .platdata = &dtv_pinctrl, + .platdata_size = sizeof(dtv_pinctrl), +}; + +static const struct dtd_rockchip_gpio_bank dtv_gpio0_at_ff210000 = { + .clocks = { + {&dtv_clock_controller_at_ff440000, {200}},}, + .gpio_controller = true, + .interrupt_controller = true, + .interrupts = {0x0, 0x33, 0x4}, + .reg = {0xff210000, 0x100}, +}; +U_BOOT_DEVICE(gpio0_at_ff210000) = { + .name = "rockchip_gpio_bank", + .platdata = &dtv_gpio0_at_ff210000, + .platdata_size = sizeof(dtv_gpio0_at_ff210000), +}; + +static const struct dtd_regulator_fixed dtv_sdmmc_regulator = { + .gpio = {0x60, 0x1e, 0x1}, + .pinctrl_0 = 0x61, + .pinctrl_names = "default", + .regulator_max_microvolt = 0x325aa0, + .regulator_min_microvolt = 0x325aa0, + .regulator_name = "vcc_sd", + .vin_supply = 0x1c, +}; +U_BOOT_DEVICE(sdmmc_regulator) = { + .name = "regulator_fixed", + .platdata = &dtv_sdmmc_regulator, + .platdata_size = sizeof(dtv_sdmmc_regulator), +}; + +static const struct dtd_rockchip_rk3328_dmc dtv_dmc = { + .reg = {0xff400000, 0x1000, 0xff780000, 0x3000, 0xff100000, 0x1000, 0xff440000, 0x1000, + 0xff720000, 0x1000, 0xff798000, 0x1000}, + .rockchip_sdram_params = {0x1, 0xa, 0x2, 0x1, 0x0, 0x0, 0x11, 0x0, + 0x11, 0x0, 0x0, 0x94291288, 0x0, 0x27, 0x462, 0x15, + 0x242, 0xff, 0x14d, 0x0, 0x1, 0x0, 0x0, 0x0, + 0x43049010, 0x64, 0x28003b, 0xd0, 0x20053, 0xd4, 0x220000, 0xd8, + 0x100, 0xdc, 0x40000, 0xe0, 0x0, 0xe4, 0x110000, 0xe8, + 0x420, 0xec, 0x400, 0xf4, 0xf011f, 0x100, 0x9060b06, 0x104, + 0x20209, 0x108, 0x505040a, 0x10c, 0x40400c, 0x110, 0x5030206, 0x114, + 0x3030202, 0x120, 0x3030b03, 0x124, 0x20208, 0x180, 0x1000040, 0x184, + 0x0, 0x190, 0x7030003, 0x198, 0x5001100, 0x1a0, 0xc0400003, 0x240, + 0x6000604, 0x244, 0x201, 0x250, 0xf00, 0x490, 0x1, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0x4, 0xc, 0x28, 0xa, 0x2c, + 0x0, 0x30, 0x9, 0xffffffff, 0xffffffff, 0x77, 0x88, 0x79, + 0x79, 0x87, 0x97, 0x87, 0x78, 0x77, 0x78, 0x87, + 0x88, 0x87, 0x87, 0x77, 0x78, 0x78, 0x78, 0x78, + 0x78, 0x78, 0x78, 0x78, 0x78, 0x69, 0x9, 0x77, + 0x78, 0x77, 0x78, 0x77, 0x78, 0x77, 0x78, 0x77, + 0x79, 0x9, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, + 0x78, 0x78, 0x78, 0x69, 0x9, 0x77, 0x78, 0x77, + 0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x79, 0x9, + 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, + 0x78, 0x69, 0x9, 0x77, 0x78, 0x77, 0x78, 0x77, + 0x78, 0x77, 0x78, 0x77, 0x79, 0x9, 0x78, 0x78, + 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x69, + 0x9, 0x77, 0x78, 0x77, 0x77, 0x77, 0x77, 0x77, + 0x77, 0x77, 0x79, 0x9}, +}; +U_BOOT_DEVICE(dmc) = { + .name = "rockchip_rk3328_dmc", + .platdata = &dtv_dmc, + .platdata_size = sizeof(dtv_dmc), +}; + diff --git a/package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-structs-gen.h b/package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-structs-gen.h new file mode 100644 index 0000000000..88291627b8 --- /dev/null +++ b/package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-structs-gen.h @@ -0,0 +1,72 @@ +/* + * DO NOT MODIFY + * + * This file was generated by dtoc from a .dtb (device tree binary) file. + */ + +#include +#include +struct dtd_regulator_fixed { + fdt32_t gpio[3]; + fdt32_t pinctrl_0; + const char * pinctrl_names; + fdt32_t regulator_max_microvolt; + fdt32_t regulator_min_microvolt; + const char * regulator_name; + fdt32_t vin_supply; +}; +struct dtd_rockchip_gpio_bank { + struct phandle_1_arg clocks[1]; + bool gpio_controller; + bool interrupt_controller; + fdt32_t interrupts[3]; + fdt64_t reg[2]; +}; +struct dtd_rockchip_rk3328_cru { + fdt64_t reg[2]; + fdt32_t rockchip_grf; +}; +struct dtd_rockchip_rk3328_dmc { + fdt64_t reg[12]; + fdt32_t rockchip_sdram_params[196]; +}; +struct dtd_rockchip_rk3328_dw_mshc { + fdt32_t bus_width; + bool cap_mmc_highspeed; + bool cap_sd_highspeed; + struct phandle_1_arg clocks[4]; + bool disable_wp; + fdt32_t fifo_depth; + fdt32_t interrupts[3]; + fdt32_t max_frequency; + fdt32_t pinctrl_0[4]; + const char * pinctrl_names; + fdt64_t reg[2]; + bool u_boot_spl_fifo_mode; + fdt32_t vmmc_supply; + fdt32_t vqmmc_supply; +}; +struct dtd_rockchip_rk3328_grf { + fdt64_t reg[2]; +}; +struct dtd_rockchip_rk3328_pinctrl { + bool ranges; + fdt32_t rockchip_grf; +}; +struct dtd_rockchip_rk3328_uart { + fdt32_t clock_frequency; + struct phandle_1_arg clocks[2]; + const char * dma_names[2]; + fdt32_t dmas[4]; + fdt32_t interrupts[3]; + fdt32_t pinctrl_0; + const char * pinctrl_names; + fdt64_t reg[2]; + fdt32_t reg_io_width; + fdt32_t reg_shift; +}; +#define dtd_syscon dtd_rockchip_rk3328_cru +#define dtd_simple_mfd dtd_rockchip_rk3328_grf +#define dtd_snps_dw_apb_uart dtd_rockchip_rk3328_uart +#define dtd_rockchip_cru dtd_rockchip_rk3328_cru +#define dtd_rockchip_rk3288_dw_mshc dtd_rockchip_rk3328_dw_mshc