From: David Bauer Date: Wed, 30 Jun 2021 21:36:02 +0000 (+0200) Subject: ath79: resolve GPIO address conflicts X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=04942780734da56626d088d824a6117a74757637;p=openwrt%2Fstaging%2Fansuel.git ath79: resolve GPIO address conflicts The ar71xx GPIO driver only uses 0x24 registers, all following GPIO registers are using to control pinmux functions, which are not handles by the GPIO driver but the generic Linux pinctrl driver. For some SoC conflicting address ranges were defined for these (AR7240 & AR9330). Resolve these cases and align the address space of the GPIO controller between all SoCs, as the used address space of the driver is identical for all these. Signed-off-by: David Bauer --- diff --git a/target/linux/ath79/dts/ar7100.dtsi b/target/linux/ath79/dts/ar7100.dtsi index ec6ff30ab6..86673cb5da 100644 --- a/target/linux/ath79/dts/ar7100.dtsi +++ b/target/linux/ath79/dts/ar7100.dtsi @@ -57,7 +57,7 @@ gpio: gpio@18040000 { compatible = "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; + reg = <0x18040000 0x28>; interrupts = <2>; ngpios = <16>; diff --git a/target/linux/ath79/dts/ar724x.dtsi b/target/linux/ath79/dts/ar724x.dtsi index 25d72a786c..882b0bc51a 100644 --- a/target/linux/ath79/dts/ar724x.dtsi +++ b/target/linux/ath79/dts/ar724x.dtsi @@ -50,7 +50,7 @@ gpio: gpio@18040000 { compatible = "qca,ar7240-gpio", "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; + reg = <0x18040000 0x28>; interrupts = <2>; ngpios = <18>; diff --git a/target/linux/ath79/dts/ar9132.dtsi b/target/linux/ath79/dts/ar9132.dtsi index 37fc32e6d6..44a5870ad7 100644 --- a/target/linux/ath79/dts/ar9132.dtsi +++ b/target/linux/ath79/dts/ar9132.dtsi @@ -77,7 +77,7 @@ gpio: gpio@18040000 { compatible = "qca,ar9132-gpio", "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; + reg = <0x18040000 0x28>; interrupts = <2>; ngpios = <22>; diff --git a/target/linux/ath79/dts/ar9330.dtsi b/target/linux/ath79/dts/ar9330.dtsi index 7607fede49..06e1cf4601 100644 --- a/target/linux/ath79/dts/ar9330.dtsi +++ b/target/linux/ath79/dts/ar9330.dtsi @@ -49,7 +49,7 @@ gpio: gpio@18040000 { compatible = "qca,ar7100-gpio"; - reg = <0x18040000 0x34>; + reg = <0x18040000 0x28>; interrupts = <2>; ngpios = <30>; diff --git a/target/linux/ath79/dts/ar934x.dtsi b/target/linux/ath79/dts/ar934x.dtsi index 42fbab4b60..84dbe65f85 100644 --- a/target/linux/ath79/dts/ar934x.dtsi +++ b/target/linux/ath79/dts/ar934x.dtsi @@ -78,7 +78,7 @@ gpio: gpio@18040000 { compatible = "qca,ar9340-gpio"; - reg = <0x18040000 0x2c>; + reg = <0x18040000 0x28>; interrupts = <2>; ngpios = <23>;