From: Dhananjay Phadke Date: Tue, 24 Feb 2009 11:42:59 +0000 (-0800) Subject: netxen: fix physical port mapping X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=044fad0dbb4e814c061916fe5a36851af2fd1135;p=openwrt%2Fstaging%2Fblogic.git netxen: fix physical port mapping The PCI function to physical port mapping is valid only for old firmware. New firmware (4.0.0+) abstracts this. So driver should never try to access phy using invalid mapping. The behavior is unpredictable when PCI functions 4-7 are enabled on the same NIC. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 9f33e442f403..f42581157f4e 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -795,9 +795,12 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) * See if the firmware gave us a virtual-physical port mapping. */ adapter->physical_port = adapter->portnum; - i = adapter->pci_read_normalize(adapter, CRB_V2P(adapter->portnum)); - if (i != 0x55555555) - adapter->physical_port = i; + if (adapter->fw_major < 4) { + i = adapter->pci_read_normalize(adapter, + CRB_V2P(adapter->portnum)); + if (i != 0x55555555) + adapter->physical_port = i; + } adapter->flags &= ~(NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED);