From: Tianling Shen Date: Tue, 30 May 2023 04:59:07 +0000 (+0800) Subject: uboot-rockchip: add Orange Pi R1 Plus support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=043f8a4f5ecf00e8a62b5a5d48baba48e620ea6a;p=openwrt%2Fstaging%2Fblocktrron.git uboot-rockchip: add Orange Pi R1 Plus support Add support for the Xunlong Orange Pi R1 Plus. Manually generated of-platdata files to avoid swig dependency. Signed-off-by: Tianling Shen --- diff --git a/package/boot/uboot-rockchip/Makefile b/package/boot/uboot-rockchip/Makefile index bdd1f5d5d8..126af6ac54 100644 --- a/package/boot/uboot-rockchip/Makefile +++ b/package/boot/uboot-rockchip/Makefile @@ -45,6 +45,13 @@ define U-Boot/nanopi-r2s-rk3328 friendlyarm_nanopi-r2s endef +define U-Boot/orangepi-r1-plus-rk3328 + $(U-Boot/rk3328/Default) + NAME:=Orange Pi R1 Plus + BUILD_DEVICES:= \ + xunlong_orangepi-r1-plus +endef + define U-Boot/roc-cc-rk3328 $(U-Boot/rk3328/Default) NAME:=ROC-RK3328-CC @@ -87,6 +94,7 @@ UBOOT_TARGETS := \ rockpro64-rk3399 \ nanopi-r2c-rk3328 \ nanopi-r2s-rk3328 \ + orangepi-r1-plus-rk3328 \ roc-cc-rk3328 UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes diff --git a/package/boot/uboot-rockchip/patches/103-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus.patch b/package/boot/uboot-rockchip/patches/103-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus.patch new file mode 100644 index 0000000000..ff17559c2f --- /dev/null +++ b/package/boot/uboot-rockchip/patches/103-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus.patch @@ -0,0 +1,564 @@ +From ff312af37d5f263f181468639aab83f645d331f1 Mon Sep 17 00:00:00 2001 +From: Tianling Shen +Date: Sat, 20 May 2023 18:50:38 +0800 +Subject: [PATCH] rockchip: rk3328: Add support for Orange Pi R1 Plus + +Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. + +This device is similar to the NanoPi R2S, and has a 16MB +SPI NOR (mx25l12805d). The reset button is changed to +directly reset the power supply, another detail is that +both network ports have independent MAC addresses. + +The device tree and description are taken from kernel v6.3-rc1. + +Reviewed-by: Kever Yang +Signed-off-by: Tianling Shen +--- + arch/arm/dts/Makefile | 1 + + .../dts/rk3328-orangepi-r1-plus-u-boot.dtsi | 46 +++ + arch/arm/dts/rk3328-orangepi-r1-plus.dts | 373 ++++++++++++++++++ + board/rockchip/evb_rk3328/MAINTAINERS | 6 + + configs/orangepi-r1-plus-rk3328_defconfig | 114 ++++++ + 5 files changed, 540 insertions(+) + create mode 100644 arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi + create mode 100644 arch/arm/dts/rk3328-orangepi-r1-plus.dts + create mode 100644 configs/orangepi-r1-plus-rk3328_defconfig + +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -110,6 +110,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3328) += \ + rk3328-evb.dtb \ + rk3328-nanopi-r2c.dtb \ + rk3328-nanopi-r2s.dtb \ ++ rk3328-orangepi-r1-plus.dtb \ + rk3328-roc-cc.dtb \ + rk3328-rock64.dtb \ + rk3328-rock-pi-e.dtb +--- /dev/null ++++ b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi +@@ -0,0 +1,46 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++/* ++ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd ++ * (C) Copyright 2020 David Bauer ++ */ ++ ++#include "rk3328-u-boot.dtsi" ++#include "rk3328-sdram-ddr4-666.dtsi" ++/ { ++ chosen { ++ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc; ++ }; ++}; ++ ++&gpio0 { ++ u-boot,dm-spl; ++}; ++ ++&pinctrl { ++ u-boot,dm-spl; ++}; ++ ++&sdmmc0m1_gpio { ++ u-boot,dm-spl; ++}; ++ ++&pcfg_pull_up_4ma { ++ u-boot,dm-spl; ++}; ++ ++/* Need this and all the pinctrl/gpio stuff above to set pinmux */ ++&vcc_sd { ++ u-boot,dm-spl; ++}; ++ ++&gmac2io { ++ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; ++ snps,reset-active-low; ++ snps,reset-delays-us = <0 10000 50000>; ++}; ++ ++&spi0 { ++ spi_flash: spiflash@0 { ++ u-boot,dm-pre-reloc; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/dts/rk3328-orangepi-r1-plus.dts +@@ -0,0 +1,359 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Based on rk3328-nanopi-r2s.dts, which is: ++ * Copyright (c) 2020 David Bauer ++ */ ++ ++/dts-v1/; ++ ++#include ++#include ++#include "rk3328.dtsi" ++ ++/ { ++ model = "Xunlong Orange Pi R1 Plus"; ++ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; ++ ++ aliases { ++ mmc0 = &sdmmc; ++ }; ++ ++ chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ gmac_clk: gmac-clock { ++ compatible = "fixed-clock"; ++ clock-frequency = <125000000>; ++ clock-output-names = "gmac_clkin"; ++ #clock-cells = <0>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; ++ pinctrl-names = "default"; ++ ++ led-0 { ++ function = LED_FUNCTION_LAN; ++ color = ; ++ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ led-1 { ++ function = LED_FUNCTION_STATUS; ++ color = ; ++ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ ++ led-2 { ++ function = LED_FUNCTION_WAN; ++ color = ; ++ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ vcc_sd: sdmmc-regulator { ++ compatible = "regulator-fixed"; ++ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; ++ pinctrl-0 = <&sdmmc0m1_gpio>; ++ pinctrl-names = "default"; ++ regulator-name = "vcc_sd"; ++ regulator-boot-on; ++ vin-supply = <&vcc_io>; ++ }; ++ ++ vcc_sys: vcc-sys-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++ ++ vdd_5v_lan: vdd-5v-lan-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; ++ pinctrl-0 = <&lan_vdd_pin>; ++ pinctrl-names = "default"; ++ regulator-name = "vdd_5v_lan"; ++ regulator-always-on; ++ regulator-boot-on; ++ vin-supply = <&vcc_sys>; ++ }; ++}; ++ ++&cpu0 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&cpu2 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&cpu3 { ++ cpu-supply = <&vdd_arm>; ++}; ++ ++&display_subsystem { ++ status = "disabled"; ++}; ++ ++&gmac2io { ++ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; ++ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; ++ clock_in_out = "input"; ++ phy-handle = <&rtl8211e>; ++ phy-mode = "rgmii"; ++ phy-supply = <&vcc_io>; ++ pinctrl-0 = <&rgmiim1_pins>; ++ pinctrl-names = "default"; ++ snps,aal; ++ rx_delay = <0x18>; ++ tx_delay = <0x24>; ++ status = "okay"; ++ ++ mdio { ++ compatible = "snps,dwmac-mdio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rtl8211e: ethernet-phy@1 { ++ reg = <1>; ++ pinctrl-0 = <ð_phy_reset_pin>; ++ pinctrl-names = "default"; ++ reset-assert-us = <10000>; ++ reset-deassert-us = <50000>; ++ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&i2c1 { ++ status = "okay"; ++ ++ rk805: pmic@18 { ++ compatible = "rockchip,rk805"; ++ reg = <0x18>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <24 IRQ_TYPE_LEVEL_LOW>; ++ #clock-cells = <1>; ++ clock-output-names = "xin32k", "rk805-clkout2"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ pinctrl-0 = <&pmic_int_l>; ++ pinctrl-names = "default"; ++ rockchip,system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc_sys>; ++ vcc2-supply = <&vcc_sys>; ++ vcc3-supply = <&vcc_sys>; ++ vcc4-supply = <&vcc_sys>; ++ vcc5-supply = <&vcc_io>; ++ vcc6-supply = <&vcc_sys>; ++ ++ regulators { ++ vdd_log: DCDC_REG1 { ++ regulator-name = "vdd_log"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1450000>; ++ regulator-ramp-delay = <12500>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1000000>; ++ }; ++ }; ++ ++ vdd_arm: DCDC_REG2 { ++ regulator-name = "vdd_arm"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1450000>; ++ regulator-ramp-delay = <12500>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <950000>; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vcc_io: DCDC_REG4 { ++ regulator-name = "vcc_io"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3300000>; ++ }; ++ }; ++ ++ vcc_18: LDO_REG1 { ++ regulator-name = "vcc_18"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc18_emmc: LDO_REG2 { ++ regulator-name = "vcc18_emmc"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vdd_10: LDO_REG3 { ++ regulator-name = "vdd_10"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1000000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1000000>; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&io_domains { ++ pmuio-supply = <&vcc_io>; ++ vccio1-supply = <&vcc_io>; ++ vccio2-supply = <&vcc18_emmc>; ++ vccio3-supply = <&vcc_io>; ++ vccio4-supply = <&vcc_io>; ++ vccio5-supply = <&vcc_io>; ++ vccio6-supply = <&vcc_io>; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ gmac2io { ++ eth_phy_reset_pin: eth-phy-reset-pin { ++ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ }; ++ ++ leds { ++ lan_led_pin: lan-led-pin { ++ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ sys_led_pin: sys-led-pin { ++ rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ wan_led_pin: wan-led-pin { ++ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ lan { ++ lan_vdd_pin: lan-vdd-pin { ++ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pmic { ++ pmic_int_l: pmic-int-l { ++ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++}; ++ ++&pwm2 { ++ status = "okay"; ++}; ++ ++&sdmmc { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ disable-wp; ++ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; ++ pinctrl-names = "default"; ++ vmmc-supply = <&vcc_sd>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ status = "okay"; ++ ++ flash@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <50000000>; ++ }; ++}; ++ ++&tsadc { ++ rockchip,hw-tshut-mode = <0>; ++ rockchip,hw-tshut-polarity = <0>; ++ status = "okay"; ++}; ++ ++&u2phy { ++ status = "okay"; ++}; ++ ++&u2phy_host { ++ status = "okay"; ++}; ++ ++&u2phy_otg { ++ status = "okay"; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb20_otg { ++ dr_mode = "host"; ++ status = "okay"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; +--- a/board/rockchip/evb_rk3328/MAINTAINERS ++++ b/board/rockchip/evb_rk3328/MAINTAINERS +@@ -18,6 +18,12 @@ F: configs/nanopi-r2s-rk3328_defcon + F: arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi + F: arch/arm/dts/rk3328-nanopi-r2s.dts + ++ORANGEPI-R1-PLUS-RK3328 ++M: Tianling Shen ++S: Maintained ++F: configs/orangepi-r1-plus-rk3328_defconfig ++F: arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi ++ + ROC-RK3328-CC + M: Loic Devulder + M: Chen-Yu Tsai +--- /dev/null ++++ b/configs/orangepi-r1-plus-rk3328_defconfig +@@ -0,0 +1,98 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_ROCKCHIP=y ++CONFIG_SYS_TEXT_BASE=0x00200000 ++CONFIG_SPL_GPIO_SUPPORT=y ++CONFIG_ENV_OFFSET=0x3F8000 ++CONFIG_ROCKCHIP_RK3328=y ++CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y ++CONFIG_TPL_LIBCOMMON_SUPPORT=y ++CONFIG_TPL_LIBGENERIC_SUPPORT=y ++CONFIG_SPL_DRIVERS_MISC_SUPPORT=y ++CONFIG_SPL_STACK_R_ADDR=0x600000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEBUG_UART_BASE=0xFF130000 ++CONFIG_DEBUG_UART_CLOCK=24000000 ++CONFIG_SYSINFO=y ++CONFIG_DEBUG_UART=y ++CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 ++# CONFIG_ANDROID_BOOT_IMAGE is not set ++CONFIG_FIT=y ++CONFIG_FIT_VERBOSE=y ++CONFIG_SPL_LOAD_FIT=y ++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-orangepi-r1-plus.dtb" ++CONFIG_MISC_INIT_R=y ++# CONFIG_DISPLAY_CPUINFO is not set ++CONFIG_DISPLAY_BOARDINFO_LATE=y ++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set ++CONFIG_TPL_SYS_MALLOC_SIMPLE=y ++CONFIG_SPL_STACK_R=y ++CONFIG_SPL_I2C_SUPPORT=y ++CONFIG_SPL_POWER_SUPPORT=y ++CONFIG_SPL_ATF=y ++CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y ++CONFIG_CMD_BOOTZ=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_USB=y ++# CONFIG_CMD_SETEXPR is not set ++CONFIG_CMD_TIME=y ++CONFIG_SPL_OF_CONTROL=y ++CONFIG_TPL_OF_CONTROL=y ++CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus" ++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" ++CONFIG_TPL_OF_PLATDATA=y ++CONFIG_ENV_IS_IN_MMC=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_TPL_DM=y ++CONFIG_REGMAP=y ++CONFIG_SPL_REGMAP=y ++CONFIG_TPL_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_SPL_SYSCON=y ++CONFIG_TPL_SYSCON=y ++CONFIG_CLK=y ++CONFIG_SPL_CLK=y ++CONFIG_FASTBOOT_BUF_ADDR=0x800800 ++CONFIG_FASTBOOT_CMD_OEM_FORMAT=y ++CONFIG_ROCKCHIP_GPIO=y ++CONFIG_SYS_I2C_ROCKCHIP=y ++CONFIG_MMC_DW=y ++CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_SF_DEFAULT_SPEED=20000000 ++CONFIG_DM_ETH=y ++CONFIG_ETH_DESIGNWARE=y ++CONFIG_GMAC_ROCKCHIP=y ++CONFIG_PINCTRL=y ++CONFIG_SPL_PINCTRL=y ++CONFIG_DM_PMIC=y ++CONFIG_PMIC_RK8XX=y ++CONFIG_SPL_DM_REGULATOR=y ++CONFIG_REGULATOR_PWM=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_SPL_DM_REGULATOR_FIXED=y ++CONFIG_REGULATOR_RK8XX=y ++CONFIG_PWM_ROCKCHIP=y ++CONFIG_RAM=y ++CONFIG_SPL_RAM=y ++CONFIG_TPL_RAM=y ++CONFIG_DM_RESET=y ++CONFIG_BAUDRATE=1500000 ++CONFIG_DEBUG_UART_SHIFT=2 ++CONFIG_SYSRESET=y ++# CONFIG_TPL_SYSRESET is not set ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_DWC3=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_GENERIC=y ++CONFIG_USB_OHCI_HCD=y ++CONFIG_USB_OHCI_GENERIC=y ++CONFIG_USB_DWC2=y ++CONFIG_USB_DWC3=y ++# CONFIG_USB_DWC3_GADGET is not set ++CONFIG_USB_GADGET=y ++CONFIG_USB_GADGET_DWC2_OTG=y ++CONFIG_SPL_TINY_MEMSET=y ++CONFIG_TPL_TINY_MEMSET=y ++CONFIG_ERRNO_STR=y diff --git a/package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-decl.h b/package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-decl.h new file mode 100644 index 0000000000..75795aa6cc --- /dev/null +++ b/package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-decl.h @@ -0,0 +1,24 @@ +/* + * DO NOT MODIFY + * + * Declares externs for all device/uclass instances. + * This was generated by dtoc from a .dtb (device tree binary) file. + */ + +#include +#include + +/* driver declarations - these allow DM_DRIVER_GET() to be used */ +extern U_BOOT_DRIVER(rockchip_rk3328_cru); +extern U_BOOT_DRIVER(rockchip_rk3328_dmc); +extern U_BOOT_DRIVER(rockchip_rk3288_dw_mshc); +extern U_BOOT_DRIVER(ns16550_serial); +extern U_BOOT_DRIVER(rockchip_rk3328_spi); +extern U_BOOT_DRIVER(rockchip_rk3328_grf); + +/* uclass driver declarations - needed for DM_UCLASS_DRIVER_REF() */ +extern UCLASS_DRIVER(clk); +extern UCLASS_DRIVER(mmc); +extern UCLASS_DRIVER(ram); +extern UCLASS_DRIVER(serial); +extern UCLASS_DRIVER(syscon); diff --git a/package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-plat.c b/package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-plat.c new file mode 100644 index 0000000000..90656fc306 --- /dev/null +++ b/package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-plat.c @@ -0,0 +1,170 @@ +/* + * DO NOT MODIFY + * + * Declares the U_BOOT_DRIVER() records and platform data. + * This was generated by dtoc from a .dtb (device tree binary) file. + */ + +/* Allow use of U_BOOT_DRVINFO() in this file */ +#define DT_PLAT_C + +#include +#include +#include + +/* + * driver_info declarations, ordered by 'struct driver_info' linker_list idx: + * + * idx driver_info driver + * --- -------------------- -------------------- + * 0: clock_controller_at_ff440000 rockchip_rk3328_cru + * 1: dmc rockchip_rk3328_dmc + * 2: mmc_at_ff500000 rockchip_rk3288_dw_mshc + * 3: serial_at_ff130000 ns16550_serial + * 4: spi_at_ff190000 rockchip_rk3328_spi + * 5: syscon_at_ff100000 rockchip_rk3328_grf + * --- -------------------- -------------------- + */ + +/* + * Node /clock-controller@ff440000 index 0 + * driver rockchip_rk3328_cru parent None + */ +static struct dtd_rockchip_rk3328_cru dtv_clock_controller_at_ff440000 = { + .reg = {0xff440000, 0x1000}, + .rockchip_grf = 0x38, +}; +U_BOOT_DRVINFO(clock_controller_at_ff440000) = { + .name = "rockchip_rk3328_cru", + .plat = &dtv_clock_controller_at_ff440000, + .plat_size = sizeof(dtv_clock_controller_at_ff440000), + .parent_idx = -1, +}; + +/* + * Node /dmc index 1 + * driver rockchip_rk3328_dmc parent None + */ +static struct dtd_rockchip_rk3328_dmc dtv_dmc = { + .reg = {0xff400000, 0x1000, 0xff780000, 0x3000, 0xff100000, 0x1000, 0xff440000, 0x1000, + 0xff720000, 0x1000, 0xff798000, 0x1000}, + .rockchip_sdram_params = {0x1, 0xa, 0x2, 0x1, 0x0, 0x0, 0x11, 0x0, + 0x11, 0x0, 0x0, 0x94291288, 0x0, 0x27, 0x462, 0x15, + 0x242, 0xff, 0x14d, 0x0, 0x1, 0x0, 0x0, 0x0, + 0x43049010, 0x64, 0x28003b, 0xd0, 0x20053, 0xd4, 0x220000, 0xd8, + 0x100, 0xdc, 0x40000, 0xe0, 0x0, 0xe4, 0x110000, 0xe8, + 0x420, 0xec, 0x400, 0xf4, 0xf011f, 0x100, 0x9060b06, 0x104, + 0x20209, 0x108, 0x505040a, 0x10c, 0x40400c, 0x110, 0x5030206, 0x114, + 0x3030202, 0x120, 0x3030b03, 0x124, 0x20208, 0x180, 0x1000040, 0x184, + 0x0, 0x190, 0x7030003, 0x198, 0x5001100, 0x1a0, 0xc0400003, 0x240, + 0x6000604, 0x244, 0x201, 0x250, 0xf00, 0x490, 0x1, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0x4, 0xc, 0x28, 0xa, 0x2c, + 0x0, 0x30, 0x9, 0xffffffff, 0xffffffff, 0x77, 0x88, 0x79, + 0x79, 0x87, 0x97, 0x87, 0x78, 0x77, 0x78, 0x87, + 0x88, 0x87, 0x87, 0x77, 0x78, 0x78, 0x78, 0x78, + 0x78, 0x78, 0x78, 0x78, 0x78, 0x69, 0x9, 0x77, + 0x78, 0x77, 0x78, 0x77, 0x78, 0x77, 0x78, 0x77, + 0x79, 0x9, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, + 0x78, 0x78, 0x78, 0x69, 0x9, 0x77, 0x78, 0x77, + 0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x79, 0x9, + 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, + 0x78, 0x69, 0x9, 0x77, 0x78, 0x77, 0x78, 0x77, + 0x78, 0x77, 0x78, 0x77, 0x79, 0x9, 0x78, 0x78, + 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x69, + 0x9, 0x77, 0x78, 0x77, 0x77, 0x77, 0x77, 0x77, + 0x77, 0x77, 0x79, 0x9}, +}; +U_BOOT_DRVINFO(dmc) = { + .name = "rockchip_rk3328_dmc", + .plat = &dtv_dmc, + .plat_size = sizeof(dtv_dmc), + .parent_idx = -1, +}; + +/* + * Node /mmc@ff500000 index 2 + * driver rockchip_rk3288_dw_mshc parent None + */ +static struct dtd_rockchip_rk3288_dw_mshc dtv_mmc_at_ff500000 = { + .bus_width = 0x4, + .cap_sd_highspeed = true, + .clocks = { + {0, {317}}, + {0, {33}}, + {0, {74}}, + {0, {78}},}, + .disable_wp = true, + .fifo_depth = 0x100, + .interrupts = {0x0, 0xc, 0x4}, + .max_frequency = 0x8f0d180, + .pinctrl_0 = {0x45, 0x46, 0x47, 0x48}, + .pinctrl_names = "default", + .reg = {0xff500000, 0x4000}, + .u_boot_spl_fifo_mode = true, + .vmmc_supply = 0x49, +}; +U_BOOT_DRVINFO(mmc_at_ff500000) = { + .name = "rockchip_rk3288_dw_mshc", + .plat = &dtv_mmc_at_ff500000, + .plat_size = sizeof(dtv_mmc_at_ff500000), + .parent_idx = -1, +}; + +/* + * Node /serial@ff130000 index 3 + * driver ns16550_serial parent None + */ +static struct dtd_ns16550_serial dtv_serial_at_ff130000 = { + .clock_frequency = 0x16e3600, + .clocks = { + {0, {40}}, + {0, {212}},}, + .dma_names = {"tx", "rx"}, + .dmas = {0x10, 0x6, 0x10, 0x7}, + .interrupts = {0x0, 0x39, 0x4}, + .pinctrl_0 = 0x24, + .pinctrl_names = "default", + .reg = {0xff130000, 0x100}, + .reg_io_width = 0x4, + .reg_shift = 0x2, +}; +U_BOOT_DRVINFO(serial_at_ff130000) = { + .name = "ns16550_serial", + .plat = &dtv_serial_at_ff130000, + .plat_size = sizeof(dtv_serial_at_ff130000), + .parent_idx = -1, +}; + +/* Node /spi@ff190000 index 4 */ +static struct dtd_rockchip_rk3328_spi dtv_spi_at_ff190000 = { + .clocks = { + {0, {32}}, + {0, {209}},}, + .dma_names = {"tx", "rx"}, + .dmas = {0x10, 0x8, 0x10, 0x9}, + .interrupts = {0x0, 0x31, 0x4}, + .pinctrl_0 = {0x2c, 0x2d, 0x2e, 0x2f}, + .pinctrl_names = "default", + .reg = {0xff190000, 0x1000}, +}; +U_BOOT_DRVINFO(spi_at_ff190000) = { + .name = "rockchip_rk3328_spi", + .plat = &dtv_spi_at_ff190000, + .plat_size = sizeof(dtv_spi_at_ff190000), + .parent_idx = -1, +}; + +/* + * Node /syscon@ff100000 index 5 + * driver rockchip_rk3328_grf parent None + */ +static struct dtd_rockchip_rk3328_grf dtv_syscon_at_ff100000 = { + .reg = {0xff100000, 0x1000}, +}; +U_BOOT_DRVINFO(syscon_at_ff100000) = { + .name = "rockchip_rk3328_grf", + .plat = &dtv_syscon_at_ff100000, + .plat_size = sizeof(dtv_syscon_at_ff100000), + .parent_idx = -1, +}; + diff --git a/package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-structs-gen.h b/package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-structs-gen.h new file mode 100644 index 0000000000..d095831531 --- /dev/null +++ b/package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-structs-gen.h @@ -0,0 +1,55 @@ +/* + * DO NOT MODIFY + * + * Defines the structs used to hold devicetree data. + * This was generated by dtoc from a .dtb (device tree binary) file. + */ + +#include +#include +struct dtd_ns16550_serial { + fdt32_t clock_frequency; + struct phandle_1_arg clocks[2]; + const char * dma_names[2]; + fdt32_t dmas[4]; + fdt32_t interrupts[3]; + fdt32_t pinctrl_0; + const char * pinctrl_names; + fdt64_t reg[2]; + fdt32_t reg_io_width; + fdt32_t reg_shift; +}; +struct dtd_rockchip_rk3288_dw_mshc { + fdt32_t bus_width; + bool cap_sd_highspeed; + struct phandle_1_arg clocks[4]; + bool disable_wp; + fdt32_t fifo_depth; + fdt32_t interrupts[3]; + fdt32_t max_frequency; + fdt32_t pinctrl_0[4]; + const char * pinctrl_names; + fdt64_t reg[2]; + bool u_boot_spl_fifo_mode; + fdt32_t vmmc_supply; +}; +struct dtd_rockchip_rk3328_cru { + fdt64_t reg[2]; + fdt32_t rockchip_grf; +}; +struct dtd_rockchip_rk3328_dmc { + fdt64_t reg[12]; + fdt32_t rockchip_sdram_params[196]; +}; +struct dtd_rockchip_rk3328_grf { + fdt64_t reg[2]; +}; +struct dtd_rockchip_rk3328_spi { + struct phandle_1_arg clocks[2]; + const char * dma_names[2]; + fdt32_t dmas[4]; + fdt32_t interrupts[3]; + fdt32_t pinctrl_0[4]; + const char * pinctrl_names; + fdt64_t reg[2]; +};