From: Sven Wegener Date: Fri, 17 Apr 2020 22:19:51 +0000 (+0200) Subject: ath79: use correct MAC address for TP-Link TL-WPA8630 v2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0348a02c7cda8206ed865b8218adfe40f2a5c0a2;p=openwrt%2Fstaging%2Fneocturne.git ath79: use correct MAC address for TP-Link TL-WPA8630 v2 The base address is used for the LAN and 2G WLAN interfaces. 5G WLAN interface is +1 and the PLC interface uses +2. Signed-off-by: Sven Wegener [improve commit title, fix assignment in 11-ath10k-caldata] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 1c93fe332c..66777cb9f5 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -193,11 +193,16 @@ case "$FIRMWARE" in tplink,archer-c60-v2|\ tplink,archer-c60-v3|\ tplink,archer-c6-v2|\ - tplink,archer-c6-v2-us|\ + tplink,archer-c6-v2-us) + caldata_extract "art" 0x5000 0x2f20 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1) + ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ + /lib/firmware/ath10k/QCA9888/hw2.0/board.bin + ;; tplink,tl-wpa8630p-v2-eu|\ tplink,tl-wpa8630p-v2-int) caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) +1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;;