From: wdenk Date: Fri, 20 Jun 2003 22:36:30 +0000 (+0000) Subject: * Patch by Devin Crumb, 02 Apr 2003: X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0332990b8508cea232b2f2ae47283cf395c7ee62;p=project%2Fbcm63xx%2Fu-boot.git * Patch by Devin Crumb, 02 Apr 2003: Fix clock divider rounding problem in drivers/serial.c * Patch by Ken Chou, 19 June 2003: Added support for A3000 SBC board (Artis Microsystems Inc.) --- diff --git a/CHANGELOG b/CHANGELOG index 900c2f10a6..9364c95ae9 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,11 +2,15 @@ Changes since U-Boot 0.3.1: ====================================================================== -* * Patch by Richard Woodruff, 19 June 03: - - Fixed smc91c111 driver to sync with the u-boot environment (driver/smc91c111.c). +* Patch by Devin Crumb, 02 Apr 2003: + Fix clock divider rounding problem in drivers/serial.c + +* Patch by Richard Woodruff, 19 June 03: + - Fixed smc91c111 driver to sync with the u-boot environment + (driver/smc91c111.c). - Added eth_init error return check in NetLoop (net/net.c). -* Patch by Ken Chou, 17 June 2003: +* Patch by Ken Chou, 19 June 2003: Added support for A3000 SBC board (Artis Microsystems Inc.) * Patches by Murray Jensen, 17 Jun 2003: diff --git a/MAKEALL b/MAKEALL index 2edab7b1b8..b66ef972d6 100644 --- a/MAKEALL +++ b/MAKEALL @@ -58,11 +58,11 @@ LIST_4xx=" \ ######################################################################### LIST_824x=" \ - BMW CPC45 CU824 MOUSSE \ - MUSENKI OXC PN62 Sandpoint8240 \ - Sandpoint8245 utx8245 \ + A3000 BMW CPC45 CU824 \ + MOUSSE MUSENKI OXC PN62 \ + Sandpoint8240 Sandpoint8245 utx8245 \ " - +x ######################################################################### ## MPC8260 Systems (includes 8250, 8255 etc.) ######################################################################### diff --git a/Makefile b/Makefile index b368d01ad8..d9cc616d66 100644 --- a/Makefile +++ b/Makefile @@ -490,6 +490,9 @@ WALNUT405_config:unconfig ######################################################################### xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))) +A3000_config: unconfig + @./mkconfig $(@:_config=) ppc mpc824x a3000 + BMW_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x bmw diff --git a/board/a3000/Makefile b/board/a3000/Makefile new file mode 100644 index 0000000000..02e2b4b98b --- /dev/null +++ b/board/a3000/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/a3000/README b/board/a3000/README new file mode 100644 index 0000000000..417969f55f --- /dev/null +++ b/board/a3000/README @@ -0,0 +1,18 @@ +U-Boot for Artis SBC-A3000 +--------------------------- + +Artis SBC-A3000 has one flash socket that the user uses Intel 28F128J3A (16MB) +or 28F064J3A (8MB) chips. + +In board's notation, bank 0 is the one at the address of 0xFF000000. +bank 1 is the one at the address of 0xFF800000 + +On power-up the processor jumps to the address of 0xFFF00100, the last +megabyte of the bank 0 of flash. + +Thus, U-Boot is configured to reside in flash starting at the address of +0xFFF00000. The environment space is located in flash separately from +U-Boot, at the address of 0xFFFE0000. + +There is a National ns83815 10/100M ethernet controller on-board. + diff --git a/board/a3000/a3000.c b/board/a3000/a3000.c new file mode 100644 index 0000000000..e43465da37 --- /dev/null +++ b/board/a3000/a3000.c @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2001 + * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +int checkboard (void) +{ + ulong busfreq = get_bus_freq(0); + char buf[32]; + + printf("Board: A3000 Local Bus at %s MHz\n", strmhz(buf, busfreq)); + return 0; + +} + +long int initdram (int board_type) +{ + int i, cnt; + volatile uchar * base= CFG_SDRAM_BASE; + volatile ulong * addr; + ulong save[32]; + ulong val, ret = 0; + + for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { + addr = (volatile ulong *)base + cnt; + save[i++] = *addr; + *addr = ~cnt; + } + + addr = (volatile ulong *)base; + save[i] = *addr; + *addr = 0; + + if (*addr != 0) { + *addr = save[i]; + goto Done; + } + + for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { + addr = (volatile ulong *)base + cnt; + val = *addr; + *addr = save[--i]; + if (val != ~cnt) { + ulong new_bank0_end = cnt * sizeof(long) - 1; + ulong mear1 = mpc824x_mpc107_getreg(MEAR1); + ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); + + ret = cnt * sizeof(long); + goto Done; + } + } + + ret = CFG_MAX_RAM_SIZE; +Done: + return ret; +} + +/* + * Initialize PCI Devices + */ +#if 1 +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_a3000_config_table[] = { + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + 0x0, 0x0, 0x0, /* unknown eth0 divice */ + pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER }}, + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + 0x0, 0x0, 0x0, /* unknown eth1 device */ + pci_cfgfunc_config_device, { PCI_ENET1_IOADDR, + PCI_ENET1_MEMADDR, + PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER }}, + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + 0x0, 0x0, 0x0, /* unknown eth1 device */ + pci_cfgfunc_config_device, { PCI_ENET2_IOADDR, + PCI_ENET2_MEMADDR, + PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER }}, + { } +}; +#endif + +#else + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_a3000_config_table[] = { + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID, + pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID, + pci_cfgfunc_config_device, { PCI_ENET1_IOADDR, + PCI_ENET1_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, + { } +}; +#endif + +#endif + +struct pci_controller hose = { +#ifndef CONFIG_PCI_PNP + config_table: pci_a3000_config_table, +#endif +}; + +void pci_init_board(void) +{ + pci_mpc824x_init(&hose); +} diff --git a/board/a3000/config.mk b/board/a3000/config.mk new file mode 100644 index 0000000000..798e0321df --- /dev/null +++ b/board/a3000/config.mk @@ -0,0 +1,30 @@ +# +# (C) Copyright 2000, 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Artis A-3000 boards +# + +TEXT_BASE = 0xFFF00000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) diff --git a/board/a3000/flash.c b/board/a3000/flash.c new file mode 100644 index 0000000000..cbfd1d1a6d --- /dev/null +++ b/board/a3000/flash.c @@ -0,0 +1,454 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include + +#if defined(CFG_ENV_IS_IN_FLASH) +# ifndef CFG_ENV_ADDR +# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) +# endif +# ifndef CFG_ENV_SIZE +# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +# endif +# ifndef CFG_ENV_SECT_SIZE +# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE +# endif +#endif + + +/*---------------------------------------------------------------------*/ +#define DEBUG_FLASH + +#ifdef DEBUG_FLASH +#define DEBUGF(fmt,args...) printf(fmt ,##args) +#else +#define DEBUGF(fmt,args...) +#endif +/*---------------------------------------------------------------------*/ + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (vu_char *addr, flash_info_t *info); +static int write_data (flash_info_t *info, uchar *dest, uchar data); +static void flash_get_offsets (ulong base, flash_info_t *info); + +#define BS(b) (b) +#define BYTEME(x) ((x) & 0xFF) + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ + unsigned long flash_banks[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS; + unsigned long size, size_b[CFG_MAX_FLASH_BANKS]; + + int i; + + /* Init: no FLASHes known */ + for (i=0; i= CFG_FLASH_BASE + DEBUGF("protect monitor %x @ %x\n", CFG_MONITOR_BASE, CFG_MONITOR_LEN); + /* monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE+CFG_MONITOR_LEN-1, + &flash_info[0]); +#endif + +#ifdef CFG_ENV_IS_IN_FLASH + /* ENV protection ON by default */ + DEBUGF("protect environtment %x @ %x\n", CFG_ENV_ADDR, CFG_ENV_SECT_SIZE); + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1, + &flash_info[0]); +#endif + + size = 0; + DEBUGF("## Final Flash bank sizes: "); + for (i=0; iflash_id == FLASH_UNKNOWN) { + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base; + base += 0x00020000; /* 128k per bank */ + } + return; + + default: + printf ("Don't know sector ofsets for flash type 0x%lx\n", info->flash_id); + return; + } +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: printf ("AMD "); break; + case FLASH_MAN_FUJ: printf ("Fujitsu "); break; + case FLASH_MAN_SST: printf ("SST "); break; + case FLASH_MAN_STM: printf ("STM "); break; + case FLASH_MAN_INTEL: printf ("Intel "); break; + case FLASH_MAN_MT: printf ("MT "); break; + default: printf ("Unknown Vendor "); break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F320J3A: + printf ("28F320J3A (32Mbit = 128K x 32)\n"); + break; + case FLASH_28F640J3A: + printf ("28F640J3A (64Mbit = 128K x 64)\n"); + break; + case FLASH_28F128J3A: + printf ("28F128J3A (128Mbit = 128K x 128)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + +#if 1 + if (info->size >= (1 << 20)) { + i = 20; + } else { + i = 10; + } + printf (" Size: %ld %cB in %d Sectors\n", + info->size >> i, + (i == 20) ? 'M' : 'k', + info->sector_count); + + printf (" Sector Start Addresses:"); + for (i=0; isector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); +#endif + return; +} + +/*----------------------------------------------------------------------- + */ + + +/*----------------------------------------------------------------------- + */ + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (vu_char *addr, flash_info_t *info) +{ + vu_char manuf, device; + + addr[0] = BS(0x90); + manuf = BS(addr[0]); + DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, manuf); + + switch (manuf) { + case BYTEME(AMD_MANUFACT): + info->flash_id = FLASH_MAN_AMD; + break; + case BYTEME(FUJ_MANUFACT): + info->flash_id = FLASH_MAN_FUJ; + break; + case BYTEME(SST_MANUFACT): + info->flash_id = FLASH_MAN_SST; + break; + case BYTEME(STM_MANUFACT): + info->flash_id = FLASH_MAN_STM; + break; + case BYTEME(INTEL_MANUFACT): + info->flash_id = FLASH_MAN_INTEL; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + addr[0] = BS(0xFF); /* restore read mode, (yes, BS is a NOP) */ + return 0; /* no or unknown flash */ + } + + device = BS(addr[2]); /* device ID */ + + DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", (ulong)(&addr[1]), device); + + switch (device) { + case BYTEME(INTEL_ID_28F320J3A): + info->flash_id += FLASH_28F320J3A; + info->sector_count = 32; + info->size = 0x00400000; + break; /* => 4 MB */ + + case BYTEME(INTEL_ID_28F640J3A): + info->flash_id += FLASH_28F640J3A; + info->sector_count = 64; + info->size = 0x00800000; + break; /* => 8 MB */ + + case BYTEME(INTEL_ID_28F128J3A): + info->flash_id += FLASH_28F128J3A; + info->sector_count = 128; + info->size = 0x01000000; + break; /* => 16 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + addr[0] = BS(0xFF); /* restore read mode (yes, a NOP) */ + return 0; /* => no or unknown flash */ + + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + addr[0] = BS(0xFF); /* restore read mode */ + + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong start, now, last; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) { + printf ("Can erase only Intel flash types - aborted\n"); + return 1; + } + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", prot); + } else { + printf ("\n"); + } + + start = get_timer (0); + last = start; + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + vu_char *addr = (vu_char *)(info->start[sect]); + unsigned long status; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + *addr = BS(0x50); /* clear status register */ + *addr = BS(0x20); /* erase setup */ + *addr = BS(0xD0); /* erase confirm */ + + /* re-enable interrupts if necessary */ + if (flag) { + enable_interrupts(); + } + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + + while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) { + if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = BS(0xB0); /* suspend erase */ + *addr = BS(0xFF); /* reset to read mode */ + return 1; + } + + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + } + + *addr = BS(0xFF); /* reset to read mode */ + } + } + printf (" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 4 - Flash not identified + */ + +#define FLASH_WIDTH 1 /* flash bus width in bytes */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + uchar *wp = (uchar *)addr; + int rc; + + if (info->flash_id == FLASH_UNKNOWN) { + return 4; + } + + while (cnt > 0) { + if ((rc = write_data(info, wp, *src)) != 0) { + return rc; + } + wp++; + src++; + cnt--; + } + + return cnt; +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t *info, uchar *dest, uchar data) +{ + vu_char *addr = (vu_char *)dest; + ulong status; + ulong start; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((BS(*addr) & data) != data) { + return 2; + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + *addr = BS(0x40); /* write setup */ + *addr = data; + + /* re-enable interrupts if necessary */ + if (flag) { + enable_interrupts(); + } + + start = get_timer (0); + + while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *addr = BS(0xFF); /* restore read mode */ + return 1; + } + } + + *addr = BS(0xFF); /* restore read mode */ + + return 0; +} + +/*----------------------------------------------------------------------- + */ diff --git a/board/a3000/u-boot.lds b/board/a3000/u-boot.lds new file mode 100644 index 0000000000..627a53b3b6 --- /dev/null +++ b/board/a3000/u-boot.lds @@ -0,0 +1,128 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc824x/start.o (.text) + lib_ppc/board.o (.text) + lib_ppc/ppcstring.o (.text) + lib_generic/vsprintf.o (.text) + lib_generic/crc32.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + _end = . ; + PROVIDE (end = .); +} + diff --git a/drivers/serial.c b/drivers/serial.c index 5e2115e24b..36d0e6e1f6 100644 --- a/drivers/serial.c +++ b/drivers/serial.c @@ -46,7 +46,8 @@ int serial_init (void) { DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; + int clock_divisor = (CFG_NS16550_CLK + gd->baudrate * 8 ) + / (gd->baudrate * 16); #ifdef CFG_NS87308 initialise_ns87308(); diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index 231f24724e..f242d1b2f1 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -59,7 +59,9 @@ typedef struct global_data { #if defined(CONFIG_EVB64260) unsigned int mirror_hack[16]; #endif -#if defined(CONFIG_SANDPOINT) || defined(CONFIG_MUSENKI) +#if defined(CONFIG_SANDPOINT) || \ + defined(CONFIG_MUSENKI) || \ + defined(CONFIG_A3000) void * console_addr; #endif #ifdef CONFIG_AMIGAONEG3SE diff --git a/include/configs/A3000.h b/include/configs/A3000.h new file mode 100644 index 0000000000..f933ea8de3 --- /dev/null +++ b/include/configs/A3000.h @@ -0,0 +1,324 @@ +/* + * (C) Copyright 2001, 2002, 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* ------------------------------------------------------------------------- */ +/* + * Configuration settings for the A-3000 board (Artis Microsystems Inc.). + * http://artismicro.com + */ + +/* ------------------------------------------------------------------------- */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC824X 1 +#define CONFIG_MPC8245 1 +#define CONFIG_A3000 1 + + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 9600 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_BOOTDELAY 5 + +#if 0 +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_BSP | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_FLASH | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_NET | \ + CFG_CMD_PCI ) +#endif + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ + +#include + + +/* + * Miscellaneous configurable options + */ +#undef CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "A3000> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ + +/* Print Buffer Size + */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_MAXARGS 8 /* Max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x00400000 /* Default load address */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_HARD_I2C 1 /* To enable I2C support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ + +#define CONFIG_NET_MULTI /* Multi ethernet cards support */ + +/* #define CONFIG_TULIP */ +/* #define CONFIG_EEPRO100 */ +#define CONFIG_NATSEMI + +#define PCI_ENET0_IOADDR 0x80000000 +#define PCI_ENET0_MEMADDR 0x80000000 +#define PCI_ENET1_IOADDR 0x81000000 +#define PCI_ENET1_MEMADDR 0x81000000 +#define PCI_ENET2_IOADDR 0x82000000 +#define PCI_ENET2_MEMADDR 0x82000000 + + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 + +#define CFG_FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank on RCS#0 */ +#define CFG_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */ +#define CFG_FLASH_BASE CFG_FLASH_BASE0_PRELIM +#define CFG_FLASH_BANKS { CFG_FLASH_BASE0_PRELIM } + +/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the + * reset vector is actually located at FFB00100, but the 8245 + * takes care of us. + */ +#define CFG_RESET_ADDRESS 0xFFF00100 + +#define CFG_EUMB_ADDR 0xFC000000 + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +#define CFG_MEMTEST_START 0x00004000 /* memtest works on */ +#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ + + /* Maximum amount of RAM. + */ +#define CFG_MAX_RAM_SIZE 0x04000000 /* 0 .. 128 MB of (S)DRAM */ + + +#if CFG_MONITOR_BASE >= CFG_FLASH_BASE +#undef CFG_RAMBOOT +#else +#define CFG_RAMBOOT +#endif + +/* + * NS16550 Configuration + */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL + +#define CFG_NS16550_REG_SIZE 1 + +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500) +#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600) + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area + */ + +/* #define CFG_MONITOR_BASE TEXT_BASE */ +/*#define CFG_GBL_DATA_SIZE 256*/ +#define CFG_GBL_DATA_SIZE 128 +#define CFG_INIT_RAM_ADDR 0x40000000 +#define CFG_INIT_RAM_END 0x1000 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + * For the detail description refer to the MPC8240 user's manual. + */ + +#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ +#define CFG_HZ 1000 + + /* Bit-field values for MCCR1. + */ +#define CFG_ROMNAL 7 +#define CFG_ROMFAL 11 +#define CFG_DBUS_SIZE 0x3 + + /* Bit-field values for MCCR2. + */ +#define CFG_TSWAIT 0x5 /* Transaction Start Wait States timer */ +#define CFG_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */ + + /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. + */ +#define CFG_BSTOPRE 121 + + /* Bit-field values for MCCR3. + */ +#define CFG_REFREC 8 /* Refresh to activate interval */ + + /* Bit-field values for MCCR4. + */ +#define CFG_PRETOACT 3 /* Precharge to activate interval FIXME: was 2 */ +#define CFG_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */ +#define CFG_ACTORW 3 /* FIXME was 2 */ +#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */ +#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */ +#define CFG_REGISTERD_TYPE_BUFFER 1 +#define CFG_EXTROM 1 +#define CFG_REGDIMM 0 + +#define CFG_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/ + +#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */ + +/* Memory bank settings. + * Only bits 20-29 are actually used from these vales to set the + * start/end addresses. The upper two bits will always be 0, and the lower + * 20 bits will be 0x00000 for a start address, or 0xfffff for an end + * address. Refer to the MPC8240 book. + */ + +#define CFG_BANK0_START 0x00000000 +#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) +#define CFG_BANK0_ENABLE 1 +#define CFG_BANK1_START 0x3ff00000 +#define CFG_BANK1_END 0x3fffffff +#define CFG_BANK1_ENABLE 0 +#define CFG_BANK2_START 0x3ff00000 +#define CFG_BANK2_END 0x3fffffff +#define CFG_BANK2_ENABLE 0 +#define CFG_BANK3_START 0x3ff00000 +#define CFG_BANK3_END 0x3fffffff +#define CFG_BANK3_ENABLE 0 +#define CFG_BANK4_START 0x3ff00000 +#define CFG_BANK4_END 0x3fffffff +#define CFG_BANK4_ENABLE 0 +#define CFG_BANK5_START 0x3ff00000 +#define CFG_BANK5_END 0x3fffffff +#define CFG_BANK5_ENABLE 0 +#define CFG_BANK6_START 0x3ff00000 +#define CFG_BANK6_END 0x3fffffff +#define CFG_BANK6_ENABLE 0 +#define CFG_BANK7_START 0x3ff00000 +#define CFG_BANK7_END 0x3fffffff +#define CFG_BANK7_ENABLE 0 + +#define CFG_ODCR 0xff + +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) + +#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CFG_MAX_FLASH_SECT 128 /* Max number of sectors per flash */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + + + /* Warining: environment is not EMBEDDED in the U-Boot code. + * It's stored in flash separately. + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0xFFFE0000 +#define CFG_ENV_SIZE 0x00020000 /* Size of the Environment */ +#define CFG_ENV_SECT_SIZE 0x00020000 /* Size of the Environment Sector */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + + + +#endif /* __CONFIG_H */