From: Chukun Pan Date: Fri, 21 Jun 2024 15:18:21 +0000 (+0800) Subject: qualcommax: ipq60xx: add Qihoo 360V6 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=025dbeb70cf8cbbd51fe4eb9c836f0d65e41a874;p=openwrt%2Fstaging%2Fstintel.git qualcommax: ipq60xx: add Qihoo 360V6 support Specifications: SoC: Qualcomm IPQ6000 1.5GHz RAM: NTCC256M16ER-EK 512MiB Flash: W29N01HZSINA 128MiB ETH: QCA8075 (3x LAN, 1x WAN) WLAN1: 2.4GHz 802.11b/g/n/ax 2x2 WLAN2: 5GHz 802.11a/n/ac/ax 2x2 Power: DC 12V 1.5A Button: Reset, Wps USB: 1x 2.0 Flash instructions: 1. Download the initramfs image, rename it to initramfs.itb, host it with the tftp server. 2. Interrupt U-Boot and run these commands: tftpboot initramfs.itb bootm 3. After openwrt boots up, use scp or luci web to upload sysupgrade.bin to upgrade. Signed-off-by: Chukun Pan Link: https://github.com/openwrt/openwrt/pull/15940 Signed-off-by: Robert Marko --- diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index af2a62b158..b80665efdb 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -49,6 +49,7 @@ ALLWIFIBOARDS:= \ netgear_wax620 \ netgear_wax630 \ prpl_haze \ + qihoo_360v6 \ qnap_301w \ redmi_ax6 \ skspruce_wia3300-20 \ @@ -175,6 +176,7 @@ $(eval $(call generate-ipq-wifi-package,netgear_wax214,Netgear WAX214)) $(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218)) $(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620)) $(eval $(call generate-ipq-wifi-package,netgear_wax630,Netgear WAX630)) +$(eval $(call generate-ipq-wifi-package,qihoo_360v6,Qihoo 360V6)) $(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w)) $(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze)) $(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6)) diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-360v6.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-360v6.dts new file mode 100644 index 0000000000..07aabe045a --- /dev/null +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-360v6.dts @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "ipq6018-512m.dtsi" +#include "ipq6018-ess.dtsi" +#include "ipq6018-cp-cpu.dtsi" + +#include +#include +#include + +/ { + model = "Qihoo 360V6"; + compatible = "qihoo,360v6", "qcom,ipq6018"; + + aliases { + serial0 = &blsp1_uart3; + led-boot = &led_status_red; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_orange; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " root=/dev/ubiblock0_1"; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + linux,code = ; + gpios = <&tlmm 19 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "reset"; + linux,code = ; + gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: red { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>; + }; + + led_status_orange: orange { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&tlmm 72 GPIO_ACTIVE_HIGH>; + }; + + led_status_green: green { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&tlmm 73 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + mdio_pins: mdio-pins { + mdc { + pins = "gpio64"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mdio { + pins = "gpio65"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; + +&blsp1_uart3 { + pinctrl-0 = <&serial_3_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + + partitions { + compatible = "qcom,smem-part"; + }; + }; +}; + +&qusb_phy_0 { + status = "okay"; +}; + +&ssphy_0 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + + ethernet-phy-package@0 { + compatible = "qcom,qca8075-package"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + qca8075_0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + qca8075_1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + + qca8075_2: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; + + qca8075_3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + }; + }; +}; + +&switch { + status = "okay"; + + switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3)>; + switch_wan_bmp = ; + switch_mac_mode = ; + + qcom,port_phyinfo { + port@1 { + port_id = <1>; + phy_address = <0>; + }; + port@2 { + port_id = <2>; + phy_address = <1>; + }; + port@3 { + port_id = <3>; + phy_address = <2>; + }; + port@4 { + port_id = <4>; + phy_address = <3>; + }; + }; +}; + +&edma { + status = "okay"; +}; + +&dp1 { + status = "okay"; + phy-handle = <&qca8075_0>; + label = "lan1"; +}; + +&dp2 { + status = "okay"; + phy-handle = <&qca8075_1>; + label = "lan2"; +}; + +&dp3 { + status = "okay"; + phy-handle = <&qca8075_2>; + label = "lan3"; +}; + +&dp4 { + status = "okay"; + phy-handle = <&qca8075_3>; + label = "wan"; +}; + +&wifi { + status = "okay"; + + qcom,ath11k-fw-memory-mode = <1>; + qcom,ath11k-calibration-variant = "Qihoo-360V6"; +}; diff --git a/target/linux/qualcommax/image/ipq60xx.mk b/target/linux/qualcommax/image/ipq60xx.mk index 75a69d3c6b..d861f82d1c 100644 --- a/target/linux/qualcommax/image/ipq60xx.mk +++ b/target/linux/qualcommax/image/ipq60xx.mk @@ -37,6 +37,19 @@ define Device/netgear_wax214 endef TARGET_DEVICES += netgear_wax214 +define Device/qihoo_360v6 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_VENDOR := Qihoo + DEVICE_MODEL := 360V6 + BLOCKSIZE := 128k + PAGESIZE := 2048 + SOC := ipq6000 + DEVICE_DTS_CONFIG := config@cp03-c1 + DEVICE_PACKAGES := ipq-wifi-qihoo_360v6 +endef +TARGET_DEVICES += qihoo_360v6 + define Device/yuncore_fap650 $(call Device/FitImage) $(call Device/UbiFit) diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network index 86d55de7b8..86ed04f34b 100644 --- a/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network +++ b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network @@ -20,6 +20,9 @@ ipq60xx_setup_interfaces() netgear,wax214) ucidef_set_interfaces_lan_wan "lan" ;; + qihoo,360v6) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" + ;; yuncore,fap650) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" ;; @@ -29,9 +32,30 @@ ipq60xx_setup_interfaces() esac } +ipq60xx_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case "$board" in + qihoo,360v6) + lan_mac=$(mtd_get_mac_ascii factory lanMac) + wan_mac=$(macaddr_add "$lan_mac" 1) + label_mac=$lan_mac + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + board_config_update board=$(board_name) ipq60xx_setup_interfaces $board +ipq60xx_setup_macs $board board_config_flush exit 0 diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata index cc2de7514e..e35413e1e0 100644 --- a/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata +++ b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata @@ -18,6 +18,13 @@ case "$FIRMWARE" in netgear,wax214) caldata_extract "0:art" 0x1000 0x10000 ;; + qihoo,360v6) + caldata_extract "0:art" 0x1000 0x10000 + label_mac=$(mtd_get_mac_ascii factory lanMac) + ath11k_patch_mac $(macaddr_add $label_mac 3) 0 + ath11k_patch_mac $(macaddr_add $label_mac 2) 1 + ath11k_set_macflag + ;; yuncore,fap650) caldata_extract "0:art" 0x1000 0x20000 ;; diff --git a/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh b/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh index cbc6292978..c545746b31 100644 --- a/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh @@ -37,7 +37,8 @@ platform_do_upgrade() { fw_setenv bootcount 0 nand_do_upgrade "$1" ;; - netgear,wax214) + netgear,wax214|\ + qihoo,360v6) nand_do_upgrade "$1" ;; yuncore,fap650)