From: Romain MARIADASSOU Date: Sun, 1 Jul 2018 22:55:47 +0000 (+0200) Subject: Add support for TL-WA801ND v4 X-Git-Tag: state~448 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=02494fa35ca07f01598e8bddb14303486ba69ba4;p=openwrt%2Fstaging%2Fchunkeey.git Add support for TL-WA801ND v4 This add support for TP-Link TL-WA801ND v4 (same as TL-WA801ND v3) : Specification: - System-On-Chip: Qualcomm Atheros QCA9533 - CPU/Speed: 650 MHz - Flash-Chip: Winbond W25Q32BVSIG - Flash size: 4096 KiB - RAM: 32 MiB - Wireless No1: SoC-integrated: QCA9533 2.4GHz 802.11bgn Flash instructions: 1) To flash the image, rename the file openwrt-ar71xx-generic-tl-wa801nd-v4-squashfs-factory.bin to firmware.bin 2) Connect your device to the LAN port, then upload the firmware through web interface. It will try to download the image and flash it. It can take up to 2-3 minutes to finish. When it reaches 100%, the router will reboot itself. Signed-off-by: Romain MARIADASSOU --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c index 054c14ee73..1637382192 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c @@ -1,5 +1,6 @@ /* * TP-LINK TL-WA801ND v3 adapted from TP-LINK TL-WR841N/ND v9 + * TP-LINK TL-WA801ND v4 * * Copyright (C) 2014 Matthias Schiffer * Copyright (C) 2016 Tiziano Bacocco diff --git a/target/linux/ar71xx/image/tiny-tp-link.mk b/target/linux/ar71xx/image/tiny-tp-link.mk index 9d3059d127..5b0ab3e970 100644 --- a/target/linux/ar71xx/image/tiny-tp-link.mk +++ b/target/linux/ar71xx/image/tiny-tp-link.mk @@ -203,6 +203,13 @@ define Device/tl-wa801nd-v3 endef TARGET_DEVICES += tl-wa801nd-v3 +define Device/tl-wa801nd-v4 + $(Device/tl-wa801nd-v3) + DEVICE_TITLE := TP-LINK TL-WA801N/ND v4 + TPLINK_HWID := 0x08010004 +endef +TARGET_DEVICES += tl-wa801nd-v4 + define Device/tl-wa830re-v1 $(Device/tplink-4m) DEVICE_TITLE := TP-LINK TL-WA830RE v1