From: H Hartley Sweeten Date: Wed, 4 May 2016 19:47:09 +0000 (-0700) Subject: staging: comedi: dt2811: tidy up A/D Control/Status register defines X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=022ac9529986e494b39386ab59eb97c99d2e4983;p=openwrt%2Fstaging%2Fblogic.git staging: comedi: dt2811: tidy up A/D Control/Status register defines Cleanup the defines for this register and its bits and remove the redundant information in the comment. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c index 3cd9fe5d452c..433cfd136046 100644 --- a/drivers/staging/comedi/drivers/dt2811.c +++ b/drivers/staging/comedi/drivers/dt2811.c @@ -44,6 +44,25 @@ #include #include "../comedidev.h" +/* + * Register I/O map + */ +#define DT2811_ADCSR_REG 0x00 /* r/w A/D Control/Status */ +#define DT2811_ADCSR_ADDONE BIT(7) /* r 1=A/D conv done */ +#define DT2811_ADCSR_ADERROR BIT(6) /* r 1=A/D error */ +#define DT2811_ADCSR_ADBUSY BIT(5) /* r 1=A/D busy */ +#define DT2811_ADCSR_CLRERROR BIT(4) +#define DT2811_ADCSR_INTENB BIT(2) /* r/w 1=interupts ena */ +#define DT2811_ADCSR_ADMODE(x) (((x) & 0x3) << 0) +/* single conversion on ADGCR load */ +#define DT2811_ADCSR_ADMODE_SINGLE DT2811_ADCSR_ADMODE(0) +/* continuous conversion, internal clock, (clock enabled on ADGCR load) */ +#define DT2811_ADCSR_ADMODE_CONT DT2811_ADCSR_ADMODE(1) +/* continuous conversion, internal clock, external trigger */ +#define DT2811_ADCSR_ADMODE_EXT_TRIG DT2811_ADCSR_ADMODE(2) +/* continuous conversion, external clock, external trigger */ +#define DT2811_ADCSR_ADMODE_EXT DT2811_ADCSR_ADMODE(3) + static const struct comedi_lrange range_dt2811_pgh_ai_5_unipolar = { 4, { UNI_RANGE(5), @@ -100,28 +119,6 @@ static const struct comedi_lrange range_dt2811_pgl_ai_5_bipolar = { /* - 0x00 ADCSR R/W A/D Control/Status Register - bit 7 - (R) 1 indicates A/D conversion done - reading ADDAT clears bit - (W) ignored - bit 6 - (R) 1 indicates A/D error - (W) ignored - bit 5 - (R) 1 indicates A/D busy, cleared at end - of conversion - (W) ignored - bit 4 - (R) 0 - (W) - bit 3 - (R) 0 - bit 2 - (R/W) 1 indicates interrupts enabled - bits 1,0 - (R/W) mode bits - 00 single conversion on ADGCR load - 01 continuous conversion, internal clock, - (clock enabled on ADGCR load) - 10 continuous conversion, internal clock, - external trigger - 11 continuous conversion, external clock, - external trigger - 0x01 ADGCR R/W A/D Gain/Channel Register bit 6,7 - (R/W) gain select 00 gain=1, both PGH, PGL models @@ -169,7 +166,6 @@ static const struct comedi_lrange range_dt2811_pgl_ai_5_bipolar = { #define TIMEOUT 10000 -#define DT2811_ADCSR 0 #define DT2811_ADGCR 1 #define DT2811_ADDATLO 2 #define DT2811_ADDATHI 3 @@ -180,19 +176,6 @@ static const struct comedi_lrange range_dt2811_pgl_ai_5_bipolar = { #define DT2811_DIO 6 #define DT2811_TMRCTR 7 -/* - * flags - */ - -/* ADCSR */ - -#define DT2811_ADDONE 0x80 -#define DT2811_ADERROR 0x40 -#define DT2811_ADBUSY 0x20 -#define DT2811_CLRERROR 0x10 -#define DT2811_INTENB 0x04 -#define DT2811_ADMODE 0x03 - struct dt2811_board { const char *name; const struct comedi_lrange *bip_5; @@ -227,8 +210,8 @@ static int dt2811_ai_eoc(struct comedi_device *dev, { unsigned int status; - status = inb(dev->iobase + DT2811_ADCSR); - if ((status & DT2811_ADBUSY) == 0) + status = inb(dev->iobase + DT2811_ADCSR_REG); + if ((status & DT2811_ADCSR_ADBUSY) == 0) return 0; return -EBUSY; }