From: John Crispin Date: Thu, 19 Feb 2015 09:07:06 +0000 (+0000) Subject: at91: Add dts for Exegin Q5x boards. X-Git-Tag: reboot~4228 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0227827f7bdfd029f40a4bf4b12a325e11dd4859;p=openwrt%2Fstaging%2Flynxis.git at91: Add dts for Exegin Q5x boards. Signed-off-by: Owen Kirby SVN-Revision: 44492 --- diff --git a/target/linux/at91/files/arch/arm/boot/dts/at91-q5xr5.dts b/target/linux/at91/files/arch/arm/boot/dts/at91-q5xr5.dts new file mode 100644 index 0000000000..2aa04ca6f6 --- /dev/null +++ b/target/linux/at91/files/arch/arm/boot/dts/at91-q5xr5.dts @@ -0,0 +1,193 @@ +/* + * q5xr5.dts - Device Tree file for Exegin Q5xR5 board + * + * Copyright (C) 2014 Owen Kirby + * + * Licensed under GPLv2. + */ +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "Exegin Q5x (rev5)"; + compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2"; + }; + + memory { + reg = <0x20000000 0x0>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + pinctrl@fffff400 { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = <2 1 0x2 0x0>; /* PC1 periph B */ + }; + pinctrl_spi0_npcs0: spi0_npcs0 { + atmel,pins = <0 3 0x1 0x0>; /* PA3 periph A */ + }; + pinctrl_spi0_npcs1: spi0_npcs1 { + atmel,pins = <2 11 0x2 0x0>; /* PC11 periph B */ + }; + pinctrl_spi1_npcs0: spi1_npcs0 { + atmel,pins = <1 3 0x1 0x0>; /* PB3 periph A */ + }; + pinctrl_spi1_npcs1: spi1_npcs1 { + atmel,pins = <2 5 0x2 0x0>; /* PC5 periph B */ + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */ + 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */ + 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */ + 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */ + 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */ + }; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "mii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + spi0: spi@fffc8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffc8000 0x200>; + interrupts = <12 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "okay"; + cs-gpios = <&pioA 3 0>, <&pioC 11 1>, <0>, <0>; + + m25p80@0 { + compatible = "sst,sst25vf040b"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + at91boot@0 { + label = "at91boot"; + reg = <0x0 0x4000>; + }; + uenv@4000 { + label = "uboot-env"; + reg = <0x4000 0x4000>; + }; + uboot@8000 { + label = "uboot"; + reg = <0x8000 0x3E000>; + }; + }; + spidev@1 { + compatible = "spidev"; + spi-max-frequency = <2000000>; + reg = <1>; + }; + }; + spi1: spi@fffcc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffcc000 0x200>; + interrupts = <13 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = <&pioB 3 0>, <&pioC 5 1>, <0>, <0>; + status = "okay"; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <2000000>; + reg = <0>; + }; + spidev@1 { + compatible = "spidev"; + spi-max-frequency = <2000000>; + reg = <1>; + }; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + flash@10000000 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x10000000 0x00800000>; + #address-cells = <1>; + #size-cells = <1>; + + kernel@0 { + label = "kernel"; + reg = <0x0 0x200000>; + }; + rootfs@200000 { + label = "rootfs"; + reg = <0x200000 0x600000>; + }; + }; +}; diff --git a/target/linux/at91/image/Makefile b/target/linux/at91/image/Makefile index a44489ca54..f88cab4297 100644 --- a/target/linux/at91/image/Makefile +++ b/target/linux/at91/image/Makefile @@ -58,6 +58,9 @@ Image/Build/Kernel/USBA9263=$(call MkuImageDtb,usb_a9263,usb_a9263) Image/Build/Kernel/USBA9G20=$(call MkuImageDtb,usb_a9g20,usb_a9g20) # Ethernut Image/Build/Kernel/ETHERNUT5=$(call MkuImageDtb,ethernut5,ethernut5) +# Exegin +Image/Build/Kernel/Q5XR5=$(call MkOftree,q5xr5,at91-q5xr5) + define Image/Build/Kernel/Default $(call Image/Build/Kernel/AT91SAM9263EK) @@ -78,6 +81,7 @@ define Image/Build/Kernel/Default $(call Image/Build/Kernel/USBA9263) $(call Image/Build/Kernel/USBA9G20) $(call Image/Build/Kernel/ETHERNUT5) + $(call Image/Build/Kernel/Q5XR5) endef define Image/BuildKernel diff --git a/target/linux/at91/patches/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches/101-ARM-at91-build-dtb-for-q5xr5.patch new file mode 100644 index 0000000000..0465552c1b --- /dev/null +++ b/target/linux/at91/patches/101-ARM-at91-build-dtb-for-q5xr5.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -20,6 +20,7 @@ + dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb + # sam9g20 + dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb ++dtb-$(CONFIG_ARCH_AT91) += at91-q5xr5.dtb + dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb + dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb + dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb