From: Wolfgang Denk Date: Sat, 28 Jun 2008 21:16:01 +0000 (+0200) Subject: Update CHANGELOG X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=01db232dd7a0ceb81208a9f2545720c80e5bfd83;p=project%2Fbcm63xx%2Fu-boot.git Update CHANGELOG Signed-off-by: Wolfgang Denk --- diff --git a/CHANGELOG b/CHANGELOG index ccebd4ef58..02b05a6f6a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,2755 @@ +commit c7f879ec2b389c4f2bf726b293bd516f4c692e03 +Author: Hugo Villeneuve +Date: Wed May 21 13:58:41 2008 -0400 + + ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS) + + This patch adds support for the Lyrtech SFF-SDR board, + based on the TI DaVinci architecture (ARM926EJS). + + Signed-off-by: Hugo Villeneuve + Signed-off-by: Philip Balister + Signed-off-by: Wolfgang Denk + +commit 341188b9ccaa8d4462d772cc067aca8d7618633a +Author: Haavard Skinnemoen +Date: Thu May 22 11:09:59 2008 +0200 + + MMC: Consolidate MMC/SD command definitions + + This moves the MMC and SD Card command definitions from + include/asm/arch/mmc.h into include/mmc.h. These definitions are + given by the MMC and SD Card standards, not by any particular + architecture. + + There's a lot more room for consolidation in the MMC drivers which + I'm hoping to get done eventually, but this patch is a start. + + Compile-tested for all avr32 boards as well as lpc2292sodimm and + lubbock. This should cover all three mmc drivers in the tree. + + Signed-off-by: Haavard Skinnemoen + +commit fa60edfc4c952626e048c0e065f654b3c1822fa5 +Author: Kyungmin Park +Date: Wed May 21 14:38:08 2008 +0900 + + Use better Ethernet timings for apollon board + + Signed-off-by: Kyungmin Park + +commit 41c5eaa7253ed82bbae1eda5667755872c615164 +Author: Andy Fleming +Date: Mon Jun 16 13:58:56 2008 -0500 + + Resize device tree to allow space for board changes and the chosen node + + Current code requires that a compiled device tree have space added to the end to + leave room for extra nodes added by board code (and the chosen node). This + requires that device tree creators anticipate how much space U-Boot will add to + the tree, which is absurd. Ideally, the code would resize and/or relocate the + tree when it needed more space, but this would require a systemic change to the + fdt code, which is non-trivial. Instead, we resize the tree inside + boot_relocate_fdt, reserving either the remainder of the bootmap (in the case + where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size. + + Signed-off-by: Andy Fleming + +commit 7570a9941fc565922078679a72d246fe208d696d +Author: Andy Fleming +Date: Mon Jun 16 13:58:55 2008 -0500 + + Fix an underflow bug in __lmb_alloc_base + + __lmb_alloc_base can underflow if it fails to find free space. This was fixed + in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch + merely updates __lmb_alloc_base to resemble the current version in Linux. + + Signed-off-by: Andy Fleming + +commit 63796c4e61b207d2e635729d41b7a7f7d188b03c +Author: Andy Fleming +Date: Mon Jun 16 13:58:54 2008 -0500 + + Add lmb_free + + lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or + lmb_reserve to temporarily reserve some memory. + + Signed-off-by: Andy Fleming + +commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d +Author: Andy Fleming +Date: Mon Jun 16 13:58:53 2008 -0500 + + Add ALIGN() macro + + ALIGN() returns the smallest aligned value greater than the passed + in address or size. Taken from Linux. + + Signed-off-by: Andy Fleming + +commit 28eab0d77352b84885f938759bf2612b7bf0bc44 +Author: Haavard Skinnemoen +Date: Mon May 19 12:26:38 2008 +0200 + + Conditionally add -fno-stack-protector to CFLAGS + + When compile-testing on powerpc, I get errors like this: + + net/nfs.c:422: undefined reference to `__stack_chk_fail_local' + + This seems to be because -fstack-protector is on by default, so + let's explicitly disable it on all architectures that support the + option. + + The Ubuntu toolchain is affected by this problem, and according to + Mike Frysinger, Gentoo has been running with SSP enabled for years. + More and more distros are turning SSP on by default, so this problem + is likely to get worse in the future. + + Also, powerpc just happens to be one of the arches I do + compile-testing on. There may be other arches affected by this too. + + Signed-off-by: Haavard Skinnemoen + +commit dfd3be881c03a26e31f0dea4a42e76061fa610ac +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 18 19:09:52 2008 +0200 + + pcmcia/ti_pci1410a: Move compile condition to the Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 18 19:09:51 2008 +0200 + + pxa_pcmcia: Move compile condition to the Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit c9eff32881fb429101c937cf8c268f1d42e5c2a9 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun May 18 19:09:50 2008 +0200 + + marabun_pcmcia: Move compile condition to the Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:02:30 2008 +0200 + + MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver + + This patch is based on the following patch sent a few minutes ago: + "NAND FSL UPM: driver re-write using the hwcontrol callback" + It is untested, of course. Anton, could you please give it a try. + + Signed-off-by: Wolfgang Grandegger + Acked-by: Anton Vorontsov + +commit 96026d42fa4e646d28318c0a1438aac4b2017909 +Author: Anatolij Gustschin +Date: Thu Jun 12 12:40:11 2008 +0200 + + Fix 4xx build issue + + Building for 4xx doesn't work since commit 4dbdb768: + + In file included from 4xx_pcie.c:28: + include/asm/processor.h:971: error: expected ')' before 'ver' + make[1]: *** [4xx_pcie.o] Error 1 + + This patch fixes the problem. + + Signed-off-by: Anatolij Gustschin + Acked-by: Stefan Roese + Acked-by: Kumar Gala + +commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8 +Author: Stefan Roese +Date: Mon Jun 16 10:40:02 2008 +0200 + + cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably + + This patch simplifies flash_toggle() (AMD commandset), which is used to + detect if a FLASH device is still busy with erase/program operations. On + 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation + did not detect the busy state reliably, resulting in non erased sectors + etc. This patch now simplifies this function by "just" comparing the + complete data-word instead of ANDing it with the command-word (0x40) + before the compatison. It is done the same way in the Linux implementation + chip_ready() in cfi_cmdset_0002.c. + + Signed-off-by: Stefan Roese + +commit 9e4006bca3d9fb4a2d061996771036cb01e539d3 +Author: Philip Balister +Date: Mon Jun 16 08:58:07 2008 -0400 + + NAND: Add missing declaration to non-redundant saveenv(). + + Signed-off-by: Scott Wood + +commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52 +Author: Wolfgang Grandegger +Date: Mon Jun 2 15:09:55 2008 +0200 + + MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver + + Signed-off-by: Wolfgang Grandegger + Acked-by: Anton Vorontsov + Signed-off-by: Scott Wood + +commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f +Author: Stefan Roese +Date: Tue Jun 10 15:34:11 2008 +0200 + + ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output + + This patch disables the square wave output of the M41T62 RTC used on + Canyonlands & Glacier. Here the explanation: + + The serial real-time clock part used in the design is an + STMicro M41T62. This part has a full-time 32KHz square wave + output that is connected to the TmrClk input to the + processor. The default state for this square wave output is + enabled so the output runs continuously when the board is + powered normally and also from the battery. The TmrClk input + to the processor goes to ground when the power is removed + from the board/processor, and therefore the running square + wave output is driving ground which drains the battery quickly. + + Signed-off-by: Stefan Roese + +commit a94f22f08f280905926219e568568964cb9eeb9d +Author: Andy Fleming +Date: Wed Jun 11 18:10:20 2008 -0500 + + Fix build issue with string.h and linux/string.h + + This commit: + commit 338cc038461a6c7709c5b86fd9a240209338a1ae + Author: Wolfgang Denk + Date: Fri Jun 6 14:28:14 2008 +0200 + + tools/mkimage: fix compiler warnings on some systems. + + Broke building on some systems, because the host's string.h was interfering + with u-boot's linux/string.h. It doesn't look like we need the u-boot one if + we're building for the host, so now we only include when building inside + u-boot. + + Signed-off-by: Andy Fleming + +commit 9973e3c614721bbf169882ffc3be266a6611cd60 +Author: Becky Bruce +Date: Mon Jun 9 16:03:40 2008 -0500 + + Change initdram() return type to phys_size_t + + This patch changes the return type of initdram() from long int to phys_size_t. + This is required for a couple of reasons: long int limits the amount of dram + to 2GB, and u-boot in general is moving over to phys_size_t to represent the + size of physical memory. phys_size_t is defined as an unsigned long on almost + all current platforms. + + This patch *only* changes the return type of the initdram function (in + include/common.h, as well as in each board's implementation of initdram). It + does not actually modify the code inside the function on any of the platforms; + platforms which wish to support more than 2GB of DRAM will need to modify + their initdram() function code. + + Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc + MPC8641HPCN. + + Signed-off-by: Becky Bruce + +commit 391fd93ab23e15ab3dd58a54f5b609024009c378 +Author: Becky Bruce +Date: Mon Jun 9 20:37:18 2008 -0500 + + Change lmb to use phys_size_t/phys_addr_t + + This updates the lmb code to use phys_size_t + and phys_addr_t instead of unsigned long. Other code + which interacts with this code, like getenv_bootm_size() + is also updated. + + Booted on MPC8641HPCN, build-tested ppc, arm, mips. + + Signed-off-by: Becky Bruce + +commit 61b09fc2952dc636017df4e7970e3de132276ba1 +Author: Becky Bruce +Date: Mon Jun 9 20:37:17 2008 -0500 + + Change print_size to take phys_size_t + + Signed-off-by: Becky Bruce + +commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe +Author: Becky Bruce +Date: Mon Jun 9 20:37:16 2008 -0500 + + Change bd/gd memsize/ram_size to be phys_size_t. + + Currently, both are defined as an unsigned long, but + should be phys_size_t. This should result in no real change, + since phys_size_t is currently an unsigned long for all the + default configs. Also add print_lnum to cmd_bdinfo to deal + with the potentially wider memsize. + + Signed-off-by: Becky Bruce + +commit ba04f7010958e88a8910f2a123fee53fdc72e013 +Author: Kumar Gala +Date: Tue Jun 10 16:16:02 2008 -0500 + + FSL LAW: Add new interface to use the last free LAW + + LAWs have the concept of priority so its useful to be able to allocate + the lowest (highest number) priority. We will end up using this with the + new DDR code. + + Signed-off-by: Kumar Gala + +commit 859a86a25c569d3665ff413d1d923394b8a961f3 +Author: Kumar Gala +Date: Wed Jun 11 00:51:45 2008 -0500 + + 85xx/86xx: Move to dynamic mgmt of LAWs + + With the new LAW interface (set_next_law) we can move to letting the + system allocate which LAWs are used for what purpose. This makes life + a bit easier going forward with the new DDR code. + + Signed-off-by: Kumar Gala + Signed-off-by: Andy Fleming + Acked-by: Jon Loeliger + Acked-by: Becky Bruce + +commit f060054dadbbe7027ca088eed806a3ef1f82fdb7 +Author: Kumar Gala +Date: Wed Jun 11 00:44:10 2008 -0500 + + FSL LAW: Keep track of LAW allocations + + Make it so we keep track of which LAWs have allocated and provide + a function (set_next_law) which can allocate a LAW for us if one is + free. + + In the future we will move to doing more "dynamic" LAW allocation + since the majority of users dont really care about what LAW number + they are at. + + Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them + + Signed-off-by: Kumar Gala + Signed-off-by: Andy Fleming + +commit ddde74a159caa6e18b481fec01d40b885aebb566 +Author: Kumar Gala +Date: Mon Jun 9 22:31:57 2008 -0500 + + 85xx: remove dummy board_early_init_f + + A number of board ports have empty version of board_early_init_f + for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F. + + Signed-off-by: Kumar Gala + +commit 81e56e9af0d43712db8efb843606a8d62eab454f +Author: Kumar Gala +Date: Mon Jun 9 18:55:38 2008 -0500 + + MPC8544DS: Update config.h + + * Enable flash progress + * remove CLEAR_LAW0 since we dont really use it + + Signed-off-by: Kumar Gala + +commit 978e81604c1b28526ed580df0fbe64eb8384e94f +Author: Kumar Gala +Date: Mon Jun 9 13:37:24 2008 -0500 + + 85xx: Remove unused and unconfigured memory test code. + + Remove unused and unconfigured DDR test code from FSL 85xx boards. + Besides, other common code exists. + + Signed-off-by: Kumar Gala + +commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7 +Author: Sergei Poselenov +Date: Fri Jun 6 15:42:45 2008 +0200 + + Socrates: Added FPGA base address update in FDT. + + Signed-off-by: Sergei Poselenov + +commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4 +Author: Sergei Poselenov +Date: Fri Jun 6 15:42:44 2008 +0200 + + Socrates: NAND support added. Changed the U-Boot base address and + + Signed-off-by: Sergei Poselenov + +commit 248ae5cfc8bf69074d1da099dc495d8e06070547 +Author: Sergei Poselenov +Date: Fri Jun 6 15:42:43 2008 +0200 + + NAND: Added support for 128-bit OOB, adapted + + Signed-off-by: Sergei Poselenov + +commit 31ca0208612f2eb57690110d7c2815953650e47b +Author: Sergei Poselenov +Date: Fri Jun 6 15:42:42 2008 +0200 + + Socrates: added missed file with UPMA configuration data. + + Signed-of-by: Sergei Poselenov + +commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba +Author: Sergei Poselenov +Date: Fri Jun 6 15:42:41 2008 +0200 + + Socrates: Added FPGA mapping. LAWs and TLBs cleanup. + + Signed-off-by: Sergei Poselenov + +commit 740280e68ccc0b971e613face7eaaa8bd1382b8c +Author: Sergei Poselenov +Date: Fri Jun 6 15:42:40 2008 +0200 + + Added the upmconfig() function for 85xx. + + Signed-off-by: Sergei Poselenov + Signed-off-by: Andy Fleming + +commit d39e68514ff943930ee692cff3fde03532eb7fec +Author: Sergei Poselenov +Date: Fri Jun 6 15:42:39 2008 +0200 + + Socrates: config file cleanup. + + Signed-off-by: Sergei Poselenov + +commit e8cc3f04b124f757af4528206e60d8eb715ae083 +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:10 2008 +0200 + + TQM85xx: Change memory map to support Flash memory > 128 MiB + + Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash + memory. The current memory map only supports up to 128 MiB Flash. + This patch adds the configuration option CONFIG_TQM_BIGFLASH. If + set, up to 1 GiB flash is supported. To achieve this, the memory + map has to be adjusted in great parts (for example the CCSRBAR is + moved from 0xE0000000 to 0xA0000000). + + If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new + memory map also has to be considered in the kernel (changed + CCSRBAR address, changed PCI IO base address, ...). Please use + an appropriate Flat Device Tree blob (tqm8548.dtb). + + Signed-off-by: Martin Krause + Signed-off-by: Wolfgang Grandegger + +commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051 +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:09 2008 +0200 + + TQM85xx: NAND support via local bus UPMB + + This patch adds support for NAND FLASH on the TQM8548. It is disabled by + default and can be enabled for the TQM8548 modules. It is now based on + the re-written FSL NAND UPM driver. A patch has been posted earlier today + with the subject: + + "NAND FSL UPM: driver re-write using the hwcontrol callback" + + Note that the R/B pin is not supported by that module requiring to use + the specified maximum delay time. + + Note: With NAND support enabled the size of the U-Boot image exceeds + 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk, + doubling the image size :-(. + + Signed-off-by: Thomas Waehner + Signed-off-by: Wolfgang Grandegger + +commit b9e8078bb3f3c48111a7081e27279938c3a445e1 +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:08 2008 +0200 + + TQM8548: PCI express support + + This patch adds support for PCI express cards. The board support + now uses common FSL PCI init code, for both, PCI and PCIe on all + TQM85xx modules. + + Signed-off-by: Thomas Waehner + Signed-off-by: Wolfgang Grandegger + +commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876 +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:07 2008 +0200 + + TQM8548: Basic support for the TQM8548 modules + + This patch adds basic support for the TQM8548 module from TQ-Components + (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for + eTSEC 3 and 4 + + Furthermore Flash buffer write has been enabled to speed up output to + the Flash by approx. a factor of 10. + + Signed-off-by: Thomas Waehner + Signed-off-by: Wolfgang Grandegger + +commit 25991353204c78b094c3c1fec90182dcd607ab8f +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:06 2008 +0200 + + TQM85xx: Support for Flat Device Tree + + This patch adds support for Linux kernels using the Flat Device Tree. + It also re-defines the default environment settings for booting Linux + with the FDT blob. + + Signed-off-by: Wolfgang Grandegger + +commit d9ee843d54c54776e1fdb86336ce554906a87331 +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:05 2008 +0200 + + TQM85xx: Support for Intel 82527 compatible CAN controller + + This patch adds initialization of the UPMC RAM to support up to two + Intel 82527 compatible CAN controller on the TQM85xx modules. + + Signed-off-by: Thomas Waehner + Signed-off-by: Wolfgang Grandegger + +commit 518d5cfe72916323c746af1647764459914f555f +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:04 2008 +0200 + + TQM85xx: Bugfix in the SDRAM initialisation + + The CS0_BNDS register is now set according to the detected + memory size. + + Signed-off-by Martin Krause + +commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:03 2008 +0200 + + TQM85xx: Fix chip select configuration for second FLASH bank + + This patch fixes the re-calculation of the automatic chip select + configuration for boards with two populated FLASH banks. + + Signed-off-by: Martin Krause + +commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:02 2008 +0200 + + TQM85xx: Support for Spansion 'N' type flashes added + + The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors, + than the formerly used 'M' types (S29GLxxxM series), so the flash layout + needs to be changed -> new start address of the environment. The macro + definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be + defined for boards with 'N' type flashes. + + Signed-off-by: Martin Krause + Signed-off-by: Wolfgang Grandegger + +commit 5d5bd838f76eade22c0ea40a500389f924d0da36 +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:01 2008 +0200 + + TQM85xx: Fix CPM port pin configuration + + Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560 + board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used + as serial interface anyway. Worse, on some board variants configuring the + pins for SCC1 leads to short circuits (for example on the TQM8541-BG). + + Signed-off-by: Martin Krause + +commit b99ba1679e8cd51b023e67098c89e606e47137d2 +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:12:00 2008 +0200 + + TQM85xx: Various coding style fixes + + Signed-off-by: Wolfgang Grandegger + +commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00 +Author: Gerald Van Baren +Date: Tue Jun 10 22:15:58 2008 -0400 + + libfdt: Move the working_fdt pointer to cmd_fdt.c + + The working_fdt pointer was declared in common/fdt_support.c but was + not used there. Move it to common/cmd_fdt.c where it is used (it is + also used in lib_ppc/bootm.c). + + Signed-off-by: Gerald Van Baren + +commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e +Author: Kim Phillips +Date: Tue Jun 10 11:06:17 2008 -0500 + + fdt: unshadow global working fdt variable + + differentiate with local variables of the same name by renaming the + global 'fdt' variable 'working_fdt'. + + Signed-off-by: Kim Phillips + +commit e1eb0e25d9d8fd8efdfb93f670a417663f386022 +Author: Andy Fleming +Date: Tue Jun 10 18:49:34 2008 -0500 + + socrates: Fix PCI clk fix patch + + The submitted patch seems to have been more up-to-date, but an older patch was + already in the repository. This patch encompasses the differences + + Taken entirely from Sergei Poselenov + + Signed-off-by: Andy Fleming + +commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0 +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:02:29 2008 +0200 + + NAND FSL UPM: driver re-write using the hwcontrol callback + + This is a re-write of the NAND FSL UPM driver using the more universal + hwcontrol callback (instead of the cmdfunc callback). Here is a brief + list of furher modifications: + + - For the time being, the UPM setup writing the UPM array has been + removed from the driver and must now be done by the board specific + code. + + - The bus width definition in "struct fsl_upm_nand" is now in bits to + comply with the corresponding Linux driver and 8, 16 and 32 bit + accesses are supported. + + - chip->dev_read is only set if fun->dev_ready != NULL, which is + required for boards not connecting the R/B pin. + + - A few issue have been fixed with MxMR bit manipulation like in the + corresponding Linux driver. + + Note: I think the "io_addr" field of "struct fsl_upm" could be removed + as well, because the address is already determined by + "nand->IO_ADDR_[RW]", but I'm not 100% sure. + + This patch has been tested on a TQM8548 modules with the NAND chip + Micron MT29F8G08FABWP. + + This patch is based on the following patches posted to this list a few + minutes ago: + + PPC: add accessor macros to clear and set bits in one shot + 83xx/85xx/86xx: add more MxMR local bus definitions + + Signed-off-by: Wolfgang Grandegger + Acked-by: Anton Vorontsov + +commit 6beecfbb542992eede5831240cd58678274683a9 +Author: Wolfgang Grandegger +Date: Thu Jun 5 13:11:59 2008 +0200 + + MPC85xx: Beautify boot output of L2 cache configuration + + The boot output is now aligned poperly with other boot output + lines, e.g.: + + FLASH: 128 MB + L2: 512 KB enabled + + Signed-off-by: Wolfgang Grandegger + +commit 398415114f0a705163a14543e9fef03f734b1ffa +Author: Wolfgang Grandegger +Date: Wed Jun 4 12:45:22 2008 +0200 + + PPC: add accessor macros to clear and set bits in one shot + + PPC: add accessor macros to clear and set bits in one shot + + This patch adds macros from linux/include/asm-powerpc/io.h to clear and + set bits in one shot using the in_be32, out_be32, etc. accessor functions. + They are very handy to manipulate bits it I/O registers. + + This patch is required for my forthcoming FSL NAND UPM driver re-write and + the support for the TQM8548 module. + + Signed-off-by: Wolfgang Grandegger + +commit 4677988c7edc070c3786d3db7994abeca3ab82a0 +Author: Wolfgang Grandegger +Date: Wed Jun 4 13:52:17 2008 +0200 + + TQM: move TQM boards to board/tqc + + Move all TQM board directories to the vendor specific directory "tqc" + for modules from TQ-Components GmbH (http://www.tqc.de). + + Signed-off-by: Wolfgang Grandegger + +commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50 +Author: Wolfgang Grandegger +Date: Mon Jun 2 12:09:30 2008 +0200 + + 83xx/85xx/86xx: add more MxMR local bus definitions + + 83xx/85xx/86xx: add more MxMR local bus definitions + + This patch adds more macro definitions for the UPM Machine Mode Registers + They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx + common local bus definitions into include/asm-ppc/fsl_lbc.h. They are + required for my forthcoming FSL NAND UPM driver re-write and the support + for the TQM8548 module. + + This patch is based on the following two patches from Anton Vorontsov: + + http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html + http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html + + I leave coding style violation fixes, code beautification and name + corrections to somebody else ;-(. + + Signed-off-by: Wolfgang Grandegger + +commit c8c5fc266e4499e283c293ccb972863156aa4134 +Author: Anton Vorontsov +Date: Thu May 29 18:14:56 2008 +0400 + + 83xx/85xx: further localbus cleanups + + Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names + from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2. + + Signed-off-by: Anton Vorontsov + +commit 42dbd667c88d496882d53e22656e89b654205492 +Author: Anton Vorontsov +Date: Wed May 28 18:20:15 2008 +0400 + + 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h + + This patch moves Freescale Localbus defines out of mpc83xx.h, so we could + use it on MPC85xx and MPC86xx processors. + + Signed-off-by: Anton Vorontsov + +commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769 +Author: Kumar Gala +Date: Thu May 29 11:22:06 2008 -0500 + + 85xx: Add setting of cache props in the device tree. + + Signed-off-by: Kumar Gala + +commit 4dbdb7681e243431530df0725627192a0c4aefda +Author: Kumar Gala +Date: Tue Jun 10 16:53:46 2008 -0500 + + 85xx: expose cpu identification + + The current cpu identification code is used just to return the name + of the processor at boot. There are some other locations that the name + is useful (device tree setup). Expose the functionality to other bits + of code. + + Also, drop the 'E' suffix and add it on by looking at the SVR version + when we print this out. This is mainly to allow the most flexible use + of the name. The device tree code tends to not care about the 'E' suffix. + + Signed-off-by: Kumar Gala + +commit 2329fe113d847e43cca8e4a0e4edd613b50b8492 +Author: Kim Phillips +Date: Tue Jun 10 13:25:24 2008 -0500 + + mpc83xx: MVBLM7: minor build fixups + + Signed-off-by: Kim Phillips + +commit a1293e549b56da135ef32ffca5b9d35a16aa6802 +Author: Andre Schwarz +Date: Tue Jun 10 09:14:05 2008 +0200 + + add MPC8343 based board mvBlueLYNX-M7 (board+make files) + + Add MPC8343 based board mvBlueLYNX-M7. + It's a single board stereo camera system. + Please read doc/README.mvblm7 for details. + + Signed-off-by: Andre Schwarz + Signed-off-by: Kim Phillips + +commit c005b93925ba49f07da2aa748527996d927e172f +Author: Andre Schwarz +Date: Tue Jun 10 09:13:16 2008 +0200 + + add MPC8343 based board mvBlueLYNX-M7 (doc+config) + + Add MPC8343 based board mvBlueLYNX-M7. + It's a single board stereo camera system. + Please read doc/README.mvblm7 for details. + + Signed-off-by: Andre Schwarz + Signed-off-by: Kim Phillips + +commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3 +Author: Anton Vorontsov +Date: Thu May 29 18:14:56 2008 +0400 + + 83xx/85xx: further localbus cleanups + + move the BRx_* and ORx_* left behind in mpc85xx.h + + The same is needed for mpc8xx.h and mpc8260.h (defines are almost + the same, just few differences which needs some attention though). + + But the bad news for mpc8xx and mpc8260 is that there are a lot of users + of these defines. So this cleanup I'll leave for the "better times". + + Signed-off-by: Anton Vorontsov + Signed-off-by: Kim Phillips + +commit bf30bb1f7c954d7855d9b23624b33b00c50b4697 +Author: Anton Vorontsov +Date: Wed May 28 18:20:15 2008 +0400 + + 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h + + This patch moves Freescale Localbus defines out of mpc83xx.h, so we could + use it on MPC85xx and MPC86xx processors. + + Signed-off-by: Anton Vorontsov + Acked-by: Andy Fleming + Signed-off-by: Kim Phillips + +commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a +Author: Tor Krill +Date: Mon Jun 2 15:09:30 2008 +0200 + + Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h + + Signed-off-by: Tor Krill + Signed-off-by: Kim Phillips + +commit 3b904ccb93c3196727e2e9870cb1df903cab19ad +Author: Shinya Kuribayashi +Date: Mon Jun 9 23:37:44 2008 +0900 + + net: Conditional COBJS inclusion of network drivers + + Replace COBJS-y with appropriate driver config names. + + Signed-off-by: Shinya Kuribayashi + Signed-off-by: Ben Warren + +commit 2fb698bf50f4aff2485581a12fa634a07c040e4a +Author: Gerald Van Baren +Date: Mon Jun 9 21:02:17 2008 -0400 + + Use strncmp() for the fdt command + + Cleaner than doing multiple conditionals on characters. + + Signed-off-by: Gerald Van Baren + +commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0 +Author: Gerald Van Baren +Date: Sat Jun 7 12:25:05 2008 -0400 + + The fdt boardsetup command criteria was not unique + + It was checking just for "b", which is not unique with respect to the + "boot" command. Change to check for "boa"[rdsetup]. + + Signed-off-by: Gerald Van Baren + +commit 2f08bfa9526bae4f461e043530cfb903fec0d273 +Author: David Gibson +Date: Tue May 20 17:19:11 2008 +1000 + + libfdt: Several cleanups to parameter checking + + This patch makes a couple of small cleanups to parameter checking of + libfdt functions. + + - In several functions which take a node offset, we use an + idiom involving fdt_next_tag() first to check that we have indeed been + given a node offset. This patch adds a helper function + _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag(). + + - In fdt_rw.c in several places we have the expanded version + of the RW_CHECK_HEADER() macro for no particular reason. This patch + replaces those instances with an invocation of the macro; that's what + it's for. + + - In fdt_sw.c we rename the check_header_sw() function to + sw_check_header() to match the analgous function in fdt_rw.c, and we + provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER() + functions in fdt_rw.c + + Signed-off-by: David Gibson + +commit fec6d9ee7c10443f65ce1788ef818919167bbf2e +Author: Gerald Van Baren +Date: Tue Jun 3 20:34:45 2008 -0400 + + Remove the deprecated CONFIG_OF_FLAT_TREE + + Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is + cleaner, has better functionality, and is better supported. + + Signed-off-by: Gerald Van Baren + +commit 62bcdda293efa752f8281fbd9da03822b27ce82f +Author: Gerald Van Baren +Date: Tue Jun 3 20:26:29 2008 -0400 + + Change the stxxst to CONFIG_OF_LIBFDT + + This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change + to CONFIG_OF_LIBFDT. + + WARNING: It appears that this board lost its ability to boot via a + flattened device tree prior to this changeset. + + WARNING: This conversion was untested because I do not have a board to + test it on. + + Signed-off-by: Gerald Van Baren + +commit 589c04271d129729a8b01391453851ab9cc4069c +Author: Gerald Van Baren +Date: Tue Jun 3 20:24:58 2008 -0400 + + Convert mpc7448hpc2 to CONFIG_OF_LIBFDT + + This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change + to CONFIG_OF_LIBFDT. + + WARNING: This conversion is untested because I do not have a board to + test it on. + + NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally) + /aliases/ethernet1 property for the ethernet to work. + + Signed-off-by: Gerald Van Baren + +commit ee1e35bede91debc8bff9b02f75574486033b652 +Author: Kumar Gala +Date: Thu May 29 01:21:24 2008 -0500 + + 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it + + Signed-off-by: Kumar Gala + +commit 3b9519fc50802436e417c839e69df7b2016cade5 +Author: Becky Bruce +Date: Wed May 14 13:10:04 2008 -0500 + + MPC85xx: Change traps.c to not reference non-addressable memory + + Currently, END_OF_RAM is used by the trap code to determine if + we should attempt to access the stack pointer or not. However, + on systems with a lot of RAM, only a subset of the RAM is + guaranteed to be mapped in and accessible. Change END_OF_RAM + to use get_effective_memsize() instead of using the raw ram + size out of the bd. + + Signed-off-by: Becky Bruce + +commit 7faddaecea52f585f538fdf9c2e61f85a789b19c +Author: Nobuhiro Iwamatsu +Date: Mon Jun 9 13:39:57 2008 +0900 + + sh: Renesas Solutions SH7763RDP board support + + SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC. + In this patch, support SCIF, NOR Flash, and Ethernet. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit 60179098a95eaa972007d7ec58e4c1588029720f +Author: Nobuhiro Iwamatsu +Date: Fri Jun 6 16:24:13 2008 +0900 + + sh: Add support Renesas SH7763 + + Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other. + This patch supprts CPU register's header file. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit 08c5fabe181d663eec0feba5ecd02c0b78934a52 +Author: Nobuhiro Iwamatsu +Date: Fri Jun 6 16:16:08 2008 +0900 + + sh: SH7763 SCIF support + + SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution, + but only SCIF2 is different. This patch work all SCIF channel. + + Signed-off-by: Nobuhiro Iwamatsu + Signed-off-by: Nobuhiro Iwamatsu + +commit 79b51ff8205f0354d5300570614c1d2db499679c +Author: Shinya Kuribayashi +Date: Sat Jun 7 20:51:59 2008 +0900 + + [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines + + Also get rid of some #ifdefs in *.c files. + + Signed-off-by: Shinya Kuribayashi + +commit 8bde63eb3f79d68f693201528dafc8ae7aa087de +Author: Shinya Kuribayashi +Date: Sat Jun 7 20:51:56 2008 +0900 + + [MIPS] Rename Alchemy processor configs into CONFIG_SOC_* + + CONFIG_SOC_AU1X00 + + Common Alchemy Au1x00 stuff. All Alchemy processor based machines + need to have this config as a system type specifier. + + CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200, + CONFIG_SOC_AU1500, CONFIG_SOC_AU1550 + + Machine type specifiers. Each port should have one of aboves. + + Signed-off-by: Shinya Kuribayashi + +commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc +Author: Stuart Wood +Date: Fri May 30 16:05:28 2008 -0400 + + env_nand.c: Added bad block management for environment variables + + Modified to check for bad blocks and to skipping over them when + CFG_ENV_RANGE has been defined. + CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND + flash block size. + + Signed-off-by: Stuart Wood + Signed-off-by: Scott Wood + +commit 279726bd00558e80263d44581c44167625b7fb9a +Author: Becky Bruce +Date: Wed May 14 13:09:58 2008 -0500 + + MPC86xx: Change traps.c to not reference non-addressable memory + + Currently, END_OF_RAM is used by the trap code to determine if + we should attempt to access the stack pointer or not. However, + on systems with a lot of RAM, only a subset of the RAM is + guaranteed to be mapped in and accessible. Change END_OF_RAM + to use get_effective_memsize() instead of using the raw ram + size out of the bd to prevent us from trying to access + non-mapped memory. + + Signed-off-by: Becky Bruce + +commit 338cc038461a6c7709c5b86fd9a240209338a1ae +Author: Wolfgang Denk +Date: Fri Jun 6 14:28:14 2008 +0200 + + tools/mkimage: fix compiler warnings on some systems. + + Signed-off-by: Wolfgang Denk + +commit b2815f79288d4da7a3ba18bdbd05120ce09d5622 +Author: Stefan Roese +Date: Fri Jun 6 16:10:41 2008 +0200 + + ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options + + We use upper case letters for the AMCC processor defines (like + CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and + not CONFIG_440SPe. This patch fixes the last misspelled config options. + + Signed-off-by: Stefan Roese + +commit 72675dc6c06a48846d180106161d49dd714383cc +Author: Stefan Roese +Date: Fri Jun 6 15:55:21 2008 +0200 + + ppc4xx: Unify AMCC's board config files (part 3/3) + + This patch series unifies the AMCC eval board ports by introducing + a common include header for all AMCC eval boards: + + include/configs/amcc-common.h + + This header now includes all common configuration options/defines which + are removed from the board specific headers. + + The reason for this is ease of maintenance and unified look and feel + of all AMCC boards. + + Signed-off-by: Stefan Roese + +commit 490f204096d6e2c9940f67816f154a8125bab116 +Author: Stefan Roese +Date: Fri Jun 6 15:55:03 2008 +0200 + + ppc4xx: Unify AMCC's board config files (part 2/3) + + This patch series unifies the AMCC eval board ports by introducing + a common include header for all AMCC eval boards: + + include/configs/amcc-common.h + + This header now includes all common configuration options/defines which + are removed from the board specific headers. + + The reason for this is ease of maintenance and unified look and feel + of all AMCC boards. + + Signed-off-by: Stefan Roese + +commit a8a11a9ed046b480a16e47a158f8f5300028dfa6 +Author: Stefan Roese +Date: Fri Jun 6 15:54:31 2008 +0200 + + ppc4xx: Unify AMCC's board config files (part 1/3) + + This patch series unifies the AMCC eval board ports by introducing + a common include header for all AMCC eval boards: + + include/configs/amcc-common.h + + This header now includes all common configuration options/defines which + are removed from the board specific headers. + + The reason for this is ease of maintenance and unified look and feel + of all AMCC boards. + + Signed-off-by: Stefan Roese + +commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202 +Author: Remy Bohmer +Date: Thu Jun 5 13:03:36 2008 +0200 + + DM9000 fix status check fail 0x6d error for trizeps board + + According to the Application Notes of the DM9000, only the 2 bits 0:1 of + the status byte need to be checked to identify a valid packet in the fifo + + But, The several different Application Notes do not all speak the same + language on these bits. They do not disagree, but only 1 Application Note + noted explicitly that only these 2 bits need to be checked. + Even the datasheets do not mention anything about these 2 bits. + + Because the old code, and the kernel check the whole byte, I left this piece + untouched. + + However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so + it should work. + + Notice, that the 2nd iteration through this receive loop (when a 2nd packet is + in the fifo) is much shorter now, compared to the older U-boot driver code, + so that we can maybe run into a hardware condition now that was never seen + before, or maybe was seen very unfrequently. + + Additionaly added a cleanup of a stack variable. + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413 +Author: Shinya Kuribayashi +Date: Thu Jun 5 22:29:00 2008 +0900 + + [MIPS] Update header + + - Fix traditional KSEG names + - Replace PHYSADDR with CPHYSADDR + + Signed-off-by: Shinya Kuribayashi + +commit f0d5a6f060d00358b85c62a921a423ea8df71184 +Author: Shinya Kuribayashi +Date: Thu Jun 5 22:29:00 2008 +0900 + + [MIPS] mips_config.mk: Misc fixes + + - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk) + - Modify comments + + Signed-off-by: Shinya Kuribayashi + +commit 5f64d21c9a2998794f255b469165b91f092dfc2d +Author: Shinya Kuribayashi +Date: Thu Jun 5 22:29:00 2008 +0900 + + [MIPS] Kill unused inclusions + + Signed-off-by: Shinya Kuribayashi + +commit a55d48174cfd1a5bc184159513f48dcbbe409c83 +Author: Shinya Kuribayashi +Date: Thu Jun 5 22:29:00 2008 +0900 + + [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines + + MIPS port has two problems in timer routines. One is now we assume CFG_HZ + equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000 + in the U-Boot system. + + The other is we don't have a proper time management counter like timestamp + other ARCHs have. We need the 32-bit millisecond clock counter. + + This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a + 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number + of calculated CP0 counter cycles in a CFG_HZ. + + STRATEGY: + + * Fix improper CFG_HZ value to have 1000 + + * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead. + + * timer_init: initialize timestamp and set up the first timer expiration. + Note that we don't need to initialize CP0 count/compare registers here + as they have been already zeroed out on the system reset. Leave them as + they are. + + * get_timer: calculate how many timestamps have been passed, then return + base-relative timestamp. Make sure we can easily count missed timestamps + regardless of CP0 count/compare value. + + * get_ticks: return the current timestamp, that is get_timer(0). + + Most parts are from good old Linux v2.6.16 kernel. + + v2: + - Remove FIXME comments as they turned out to be trivial. + - Use CP0 compare register as a global variable for expirelo. + - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY + instead. + + Signed-off-by: Shinya Kuribayashi + +commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25 +Author: Shinya Kuribayashi +Date: Thu Jun 5 22:29:00 2008 +0900 + + [MIPS] lib_mips/time.c: Fix udelay + + What we have to do is just to wait for given micro-seconds. No need to + take into account current time, get_timer and CFG_HZ. + + Signed-off-by: Shinya Kuribayashi + +commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03 +Author: Shinya Kuribayashi +Date: Thu Jun 5 22:28:59 2008 +0900 + + [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros + + We already have many pre-defined CP0 access macros in . + This patch replaces mips_{compare,count}_set and mips_count_get with + existing macros. + + Signed-off-by: Shinya Kuribayashi + +commit 6b52cfe16cd539935e32bd8cf19146522e462a4d +Author: Remy Bohmer +Date: Tue Jun 3 15:48:17 2008 +0200 + + Get rid of annoying/superfluous bad-checksum warning message + + U-boot can complain a lot about 'checksum bad' when it is attached to the network. + It is annoying for ordinary users who start to doubt the network connection + in general when they see messages like this. + + This is caused by the routine NetCksumOk() which cannot handle IP-headers longer + than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them + now before checking the checksum. + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit d6ee5fa40c26970d39990c6fc4a2f20a97822650 +Author: Remy Bohmer +Date: Wed Jun 4 10:47:25 2008 +0200 + + Fix order for reading rx-status registers in 32bit mode of DM9000 + + A last minute cleanup before submitting the DM9000A patch series yesterday introduced + a bug in reading the rx-status registers in 32bit mode only. + This patch repairs this. + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit 98291e2e689096420465074cce926b226d2e71b4 +Author: Remy Bohmer +Date: Tue Jun 3 15:26:26 2008 +0200 + + DM9000: Some minor code cleanups + + Some lines of the U-boot DM9000x driver are longer than 80 characters, or + need some other minor cleanup. + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit 850ba7555dbd4ca8d14fc475b864d534797adab3 +Author: Remy Bohmer +Date: Tue Jun 3 15:26:25 2008 +0200 + + DM9000: Make driver work properly for DM9000A + + The DM9000A network controller does not work with the U-boot DM9000x driver. + Analysis showed that many incoming packets are lost. + + The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to + check for a valid rx packet be done on the interrupt status register, not + directly by performing the dummy read and the rx status check as is currently + the case in the u-boot driver. + + When the recommended poll is done as suggested the driver starts working + correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there + can be more than 1 package in the fifo at the same time. + + The driver must perform the rx-status check in a loop and read and handle all + packages until there is no more left _after_ the interrupt RX flag is set. + + This change has been tested with DM9000A, DM9000E, DM9000EP. + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d +Author: Remy Bohmer +Date: Tue Jun 3 15:26:24 2008 +0200 + + DM9000: Improve eth_reset() routine + + According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the + reset procedure must be done twice to properly reset the DM9000 by means of software. + This errata is not needed anymore for the DM9000A, but it does not bother it. + + This change has been tested with DM9000A, DM9000E, DM9000EP. + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit acba31847fad9ae40708cc2c9f3a634ec35f3416 +Author: Remy Bohmer +Date: Tue Jun 3 15:26:23 2008 +0200 + + DM9000: improve eth_send() routine + + The eth_send routine of the U-boot DM9000x driver does not match the + DM9000 or DM9000A application notes/programming guides. + + This change improves the stability of the DM9000A network controller. + + This change has been tested with DM9000A, DM9000E, DM9000EP. + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit 134e266253c02a7832560da59d394989c4f64453 +Author: Remy Bohmer +Date: Tue Jun 3 15:26:22 2008 +0200 + + DM9000: repair debug logging + + It seems that the debugging code of the DM9000x driver in U-boot has not been + compiled for a long time, because it cannot compile... + + Also rearranged some loglines to get more useful info while debugging. + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit a101361bfe23c120321e45d114c0603b8e0763e9 +Author: Remy Bohmer +Date: Tue Jun 3 15:26:21 2008 +0200 + + DM9000: Add data bus-width auto detection. + + The U-boot DM9000x driver contains a compile time bus-width definition for + the databus connected to the network controller. + + This compile check makes the code unclear, inflexible and is unneccessary. + It can be asked to the network controller what its bus-width is by reading bits + 6 and 7 of the interrupt status register. + + The linux kernel already uses a runtime mechanism to determine this bus-width, + so the implementation below looks somewhat like that implementation. + + This change has been tested with DM9000A, DM9000E, DM9000EP. + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit 63a0afa0c32e5f4ea98a9439542870072437404d +Author: Stefan Roese +Date: Wed Jun 4 19:19:20 2008 +0200 + + ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port + + This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene) + introduced by the commit: + + ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S + + With this patch SDRAM will get initialized again and booting from NAND + is working again. + + Signed-off-by: Stefan Roese + Acked-by: Eugene O'Brien + +commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc +Author: Wolfgang Denk +Date: Tue May 27 14:19:30 2008 +0200 + + Socrates: Fix PCI bus frequency report + + Signed-off-by: Sergei Poselenov + +commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f +Author: Tor Krill +Date: Thu May 29 11:10:30 2008 +0200 + + Fix incorrect switch for IF_TYPE in part.c + + Use correct field in block_dev_desc_t when writing interface type in + dev_print. Error introduced in 574b3195. + + Also added fix from Martin Krause + + Signed-off-by: Tor Krill + +commit b64b8a0bd310935b70af69ac970952f2b364ae56 +Author: Andre Schwarz +Date: Tue May 27 10:25:39 2008 +0200 + + Add size #defines for Altera Cyclone-II EP2C8 and EP2C20. + + Signed-off-by: Andre Schwarz + +commit 35ef877f0a8f6232cdef748f442fed5accb2b641 +Author: Peter Tyser +Date: Thu May 22 18:56:52 2008 -0500 + + Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating + + Removed unneeded command line history initialization. Also, the original + code would access the 'initted' variable before relocation to SDRAM + which resulted in erratic behavior since the bss is not initialized when + executing from flash. + + Signed-off-by: Peter Tyser + +commit 22f371b63038a4ecab04068877c1089e51a01ba1 +Author: Grant Erickson +Date: Wed May 21 13:28:30 2008 -0700 + + PPC4xx: Simplified post_word_{load, store} + + This patch simplifies post_word_{load,store} by using the preprocessor + to eliminate redundant, copy-and-pasted code. + + Signed-off-by: Grant Erickson + +commit 9c048b523413ae5f3ff34e00cf57569c3368ab51 +Author: Vasiliy Leoenenko +Date: Wed May 7 21:25:33 2008 +0400 + + cfi_flash: enable M18 flash chips family support. + + Added new command set ID. Buffered write command processing is changed + in order to support M18 flash chips family. + + Signed-off-by: Alexey Korolev + Signed-off-by: Vasiliy Leonenko + +commit 93c56f212ccdadc182018f0769cb284426b88f1d +Author: Vasiliy Leoenenko +Date: Wed May 7 21:24:44 2008 +0400 + + cfi_flash: support of long cmd in U-boot. + + Some NOR flash chips needs support of commands with length grether than max + value size of uchar. For example all M18 family chips use 0x1ff command in + buffered write mode as value of program loops count. + + Signed-off-by: Alexey Korolev + Signed-off-by: Vasiliy Leonenko + +commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e +Author: Stefan Roese +Date: Fri May 16 11:06:06 2008 +0200 + + DTT: Issue one-shot command on AD7414 (LM75 code) to read temp + + On AD7414 the first value upon bootup is not read correctly. + This is most likely because of the 800ms update time of the + temp register in normal update mode. To get current values + each time we issue the "dtt" command including upon powerup + we switch into one-short mode. + + This patch fixes the problem on AD7414 equipped boards (Sequoia, + Canyonlands etc), that temp value printed in the bootup log was + incorrect. + + Signed-off-by: Stefan Roese + +commit de5bfcf7b0425e032be12698252dbaa6b65a28c0 +Author: Matthias Fuchs +Date: Fri May 30 16:55:06 2008 +0200 + + ppc4xx: Cleanup CPCI405 variant's config file + + This patch removes some dead code from CPCI405 board's + config files. JFFS2 support is also removed. It's not used and + CPCI4052 does not build anymore without some size reduction. + + Signed-off-by: Matthias Fuchs + +commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65 +Author: Kenneth Johansson +Date: Thu May 29 16:32:33 2008 +0200 + + Remove shell variable UNDEF_SYM. + + UNDEF_SYM is a shell variable in the main Makefile used to force the + linker to add all u-boot commands to the final image. It has no use here. + + Signed-off-by: Kenneth Johansson + +commit 8c66497e06bf803489c589df58ee591d71033274 +Author: Haavard Skinnemoen +Date: Fri May 16 11:10:35 2008 +0200 + + Add support for environment in SPI flash + + This is pretty incomplete...it doesn't handle reading the environment + before relocation, it doesn't support redundant environment, and it + doesn't support embedded environment. But apart from that, it does + seem to work. + + Signed-off-by: Haavard Skinnemoen + +commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4 +Author: Haavard Skinnemoen +Date: Fri May 16 11:10:34 2008 +0200 + + SPI Flash: Add "sf" command + + This adds a new command, "sf" which can be used to manipulate SPI + flash. Currently, initialization, reading, writing and erasing is + supported. + + Signed-off-by: Haavard Skinnemoen + +commit d25ce7d24cc0f93881559f4009175ea305af65e8 +Author: Haavard Skinnemoen +Date: Fri May 16 11:10:33 2008 +0200 + + SPI Flash subsystem + + This adds a new SPI flash subsystem. + + Currently, only AT45 DataFlash in non-power-of-two mode is supported, + but some preliminary support for other flash types is in place as + well. + + Signed-off-by: Haavard Skinnemoen + +commit 60445cb5c3eb77ed1a07f2d908eef09174483698 +Author: Hans-Christian Egtvedt +Date: Fri May 16 11:10:32 2008 +0200 + + atmel_spi: Driver for the Atmel SPI controller + + This adds a driver for the SPI controller found on most AT91 and AVR32 + chips, implementing the new SPI API. + + Changed in v4: + - Update to new API + - Handle zero-length transfers appropriately. The user may send a + zero-length SPI transfer with SPI_XFER_END set in order to + deactivate the chip select after a series of transfers with chip + select active. This is useful e.g. when polling the status + register of DataFlash. + + Signed-off-by: Haavard Skinnemoen + +commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d +Author: Haavard Skinnemoen +Date: Fri May 16 11:10:31 2008 +0200 + + SPI API improvements + + This patch gets rid of the spi_chipsel table and adds a handful of new + functions that makes the SPI layer cleaner and more flexible. + + Instead of the spi_chipsel table, each board that wants to use SPI + gets to implement three hooks: + * spi_cs_activate(): Activates the chipselect for a given slave + * spi_cs_deactivate(): Deactivates the chipselect for a given slave + * spi_cs_is_valid(): Determines if the given bus/chipselect + combination can be activated. + + Not all drivers may need those extra functions however. If that's the + case, the board code may just leave them out (assuming they know what + the driver needs) or rely on the linker to strip them out (assuming + --gc-sections is being used.) + + To set up communication parameters for a given slave, the driver needs + to call spi_setup_slave(). This returns a pointer to an opaque + spi_slave struct which must be passed as a parameter to subsequent SPI + calls. This struct can be freed by calling spi_free_slave(), but most + driver probably don't want to do this. + + Before starting one or more SPI transfers, the driver must call + spi_claim_bus() to gain exclusive access to the SPI bus and initialize + the hardware. When all transfers are done, the driver must call + spi_release_bus() to make the bus available to others, and possibly + shut down the SPI controller hardware. + + spi_xfer() behaves mostly the same as before, but it now takes a + spi_slave parameter instead of a spi_chipsel function pointer. It also + got a new parameter, flags, which is used to specify chip select + behaviour. This may be extended with other flags in the future. + + This patch has been build-tested on all powerpc and arm boards + involved. I have not tested NIOS since I don't have a toolchain for it + installed, so I expect some breakage there even though I've tried + fixing up everything I could find by visual inspection. + + I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and + DataFlash drivers posted as a follow-up. I'd like some help testing + other boards that use the existing SPI API. + + But most of all, I'd like some comments on the new API. Is this stuff + usable for everyone? If not, why? + + Changed in v4: + - Build fixes for various boards, drivers and commands + - Provide common struct spi_slave definition that can be extended by + drivers + - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate + - Make default bus and mode build-time configurable + - Override default SPI bus ID and mode on mx32ads and imx31_litekit. + + Changed in v3: + - Add opaque struct spi_slave for controller-specific data associated + with a slave. + - Add spi_claim_bus() and spi_release_bus() + - Add spi_free_slave() + - spi_setup() is now called spi_setup_slave() and returns a + struct spi_slave + - soft_spi now supports four SPI modes (CPOL|CPHA) + - Add bus parameter to spi_setup_slave() + - Convert the new i.MX32 SPI driver + - Convert the new MC13783 RTC driver + + Changed in v2: + - Convert the mpc8xxx_spi driver and the mpc8349emds board to the + new API. + + Signed-off-by: Haavard Skinnemoen + Tested-by: Guennadi Liakhovetski + +commit 289011207d999b2e4085150d2aa30d547ad9b800 +Author: Haavard Skinnemoen +Date: Fri May 16 11:10:30 2008 +0200 + + Move definition of container_of() to common.h + + AVR32 and AT91SAM9 both have their own identical definitions of + container_of() taken from the Linux kernel. Move it to common.h so + that all architectures can use it. + + container_of() is already used by some drivers, and will be used + extensively by the new and improved SPI API. + + Signed-off-by: Haavard Skinnemoen + +commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b +Author: Haavard Skinnemoen +Date: Fri May 16 11:08:11 2008 +0200 + + soft_i2c: Pull SDA high before reading + + Spotted by Dean Capindale. + + Systems that support open-drain GPIO properly are allowed provide an + empty I2C_TRISTATE define. However, this means that we need to be + careful not to drive SDA low when the slave is expected to respond. + + This patch adds a missing I2C_SDA(1) to read_byte() required to + tristate the SDA line on systems that support open-drain GPIO. + + Signed-off-by: Haavard Skinnemoen + +commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2 +Author: Stefan Roese +Date: Mon May 19 11:34:53 2008 +0200 + + ppc4xx: Remove implementations of testdram() + + This patch removes the used testdram() implementations of the board + that are maintained by myself. + + Signed-off-by: Stefan Roese + +commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a +Author: Stefan Roese +Date: Mon Jun 2 17:37:28 2008 +0200 + + ppc4xx: Remove superfluous dram_init() call or replace it by initdram() + + Historically the 405 U-Boot port had a dram_init() call in early init + stage. This function was still called from start.S and most of the time + coded in assembler. This is not needed anymore (since a long time) and + boards should implement the common initdram() function in C instead. + + This patch now removed the dram_init() call from start.S and removes the + empty implementations that are scattered through most of the 405 board + ports. Some older board ports really implement this dram_init() though. + These are: + + csb272 + csb472 + ERIC + EXBITGEN + W7OLMC + W7OLMG + + I changed those boards to call this assembler dram_init() function now + from their board specific initdram() instead. This *should* work, but please + test again on those platforms. And it is perhaps a good idea that those + boards use some common 405 SDRAM initialization code from cpu/ppc4xx at + some time. So further patches welcome here. + + Signed-off-by: Stefan Roese + +commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2 +Author: Stefan Roese +Date: Mon Jun 2 17:22:11 2008 +0200 + + ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code + + Signed-off-by: Stefan Roese + +commit 39b32be18cd33b53a84065edcd4e465165cc5564 +Author: Stefan Roese +Date: Mon Jun 2 17:20:03 2008 +0200 + + ppc4xx: Fix common ECC generation code for 440GP style platforms + + This patch makes the common 4xx ECC code really usable on 440GP style + platforms. + + Since the IBM DDR controller used on 440GP/GX/EP/GR is not register + compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT + we need to make some processor dependant defines used later on by the + driver. + + Signed-off-by: Stefan Roese + +commit ec724f883ee3f3925e6c55027e8ffa70ada83303 +Author: Stefan Roese +Date: Mon Jun 2 17:13:55 2008 +0200 + + ppc4xx: Change Kilauea to use the common DDR2 init function + + This patch changes the kilauea and kilauea_nand (for NAND booting) + board port to not use a board specific DDR2 init routine anymore. Now + the common code from cpu/ppc4xx is used. + + Thanks to Grant Erickson for all his basic work on this 405EX early + bootup. + + Signed-off-by: Stefan Roese + +commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba +Author: Stefan Roese +Date: Mon Jun 2 14:59:21 2008 +0200 + + ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2 + + This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all + ppc4xx related SDRAM/DDR/DDR2 controller defines. + + Signed-off-by: Stefan Roese + +commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569 +Author: Stefan Roese +Date: Mon Jun 2 14:57:41 2008 +0200 + + ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1 + + This patch removes all SDRAM related defines from the PPC4xx headers + ppc405.h and ppc440.h. This is needed since now some 405 PPC's use + the same SDRAM controller as 440 systems do (like 405EX and 440SP). + + It also introduces new defines for the equipped SDRAM controller based on + which PPC variant is used. There new defines are: + + used on 405GR/CR/EP and some Xilinx Virtex boards. + + used on 440GP/GX/EP/GR. + + used on 440EPx/GRx. + + used on 405EX/r/440SP/SPe/460EX/GT. + + Signed-off-by: Stefan Roese + +commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6 +Author: Stefan Roese +Date: Mon Jun 2 14:35:44 2008 +0200 + + ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S + + This patch consolidates the 405 and 440 parts of the NAND booting code + selected via CONFIG_NAND_SPL. Now common code is used to initialize the + SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc. + Only *after* running from this location, nand_boot() is called. + + Please note that the initsdram() call is now moved from nand_boot.c + to start.S. I experienced problems with some boards like Kilauea + (405EX), which don't have internal SRAM (OCM) and relocation needs to + be done to SDRAM before the NAND controller can get accessed. When + initdram() is called later on in nand_boot(), this can lead to problems + with variables in the bss sections like nand_ecc_pos[]. + + Signed-off-by: Stefan Roese + Acked-by: Scott Wood + +commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98 +Author: Grant Erickson +Date: Thu May 22 14:44:24 2008 -0700 + + ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling + + This patch (Part 2 of 2): + + * Rolls up a suite of changes to enable correct primordial stack and + global data handling when the data cache is used for such a purpose + for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS). + + * Related to the first, unifies DDR2 SDRAM and ECC initialization by + eliminating redundant ECC initialization implementations and moving + redundant SDRAM initialization out of board code into shared 4xx + code. + + * Enables MCSR visibility on the 405EX(r). + + * Enables the use of the data cache for initial RAM on + both AMCC's Kilauea and Makalu and removes a redundant + CFG_POST_MEMORY flag from each board's CONFIG_POST value. + + - Removed, per Stefan Roese's request, defunct memory.c file for + Makalu and rolled sdram_init from it into makalu.c. + + With respect to the 4xx DDR initialization and ECC unification, there + is certainly more work that can and should be done (file renaming, + etc.). However, that can be handled at a later date on a second or + third pass. As it stands, this patch moves things forward in an + incremental yet positive way for those platforms that utilize this + code and the features associated with it. + + Signed-off-by: Grant Erickson + Signed-off-by: Stefan Roese + +commit c821b5f120bedf73867513466412587c6912a8f8 +Author: Grant Erickson +Date: Thu May 22 14:44:14 2008 -0700 + + ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling + + This patch (Part 1 of 2): + + * Rolls up a suite of changes to enable correct primordial stack and + global data handling when the data cache is used for such a purpose + for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS). + + * Related to the first, unifies DDR2 SDRAM and ECC initialization by + eliminating redundant ECC initialization implementations and moving + redundant SDRAM initialization out of board code into shared 4xx + code. + + * Enables MCSR visibility on the 405EX(r). + + * Enables the use of the data cache for initial RAM on + both AMCC's Kilauea and Makalu and removes a redundant + CFG_POST_MEMORY flag from each board's CONFIG_POST value. + + - Removed, per Stefan Roese's request, defunct memory.c file for + Makalu and rolled sdram_init from it into makalu.c. + + With respect to the 4xx DDR initialization and ECC unification, there + is certainly more work that can and should be done (file renaming, + etc.). However, that can be handled at a later date on a second or + third pass. As it stands, this patch moves things forward in an + incremental yet positive way for those platforms that utilize this + code and the features associated with it. + + Signed-off-by: Grant Erickson + Signed-off-by: Stefan Roese + +commit a439680019e06171d4a5694b7992accce87f590e +Author: Grant Erickson +Date: Wed May 21 13:28:30 2008 -0700 + + PPC4xx: Simplified post_word_{load, store} + + This patch simplifies post_word_{load,store} by using the preprocessor + to eliminate redundant, copy-and-pasted code. + + Signed-off-by: Grant Erickson + +commit f979690ee337450b2030aba128f95b7a8d9881c0 +Author: Kumar Gala +Date: Thu May 15 15:13:08 2008 -0500 + + Fix warnings from gcc-4.3.0 build on a ppc host + + * The cfi_flash.c memset fix actual allows the board to boot so there is + a bit more going on here than just resolving warnings associated with + uninitialized variables. + + * include/asm/bitops.h:302: warning: '__swab32p' is static but used in + inline function 'ext2_find_next_zero_bit' which is not static + + Signed-off-by: Kumar Gala + +commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e +Author: Becky Bruce +Date: Wed May 14 13:09:51 2008 -0500 + + MPC512x: Change traps.c to not reference non-addressable memory + + Currently, END_OF_RAM is used by the trap code to determine if + we should attempt to access the stack pointer or not. However, + on systems with a lot of RAM, only a subset of the RAM is + guaranteed to be mapped in and accessible. Change END_OF_RAM + to use get_effective_memsize() instead of using the raw ram + size out of the bd. + + Signed-off-by: Becky Bruce + +commit 81673e9ae14b771cd13faf19947192599cae3959 +Author: Kumar Gala +Date: Tue May 13 19:01:54 2008 -0500 + + Make sure common.h is the first include. + + If common.h isn't first we can get CONFIG_ options defined in the + board config file ignored. This can cause an issue if any of those + config options impact the size of types of data structures + (eg CONFIG_PHYS_64BIT). + + Signed-off-by: Kumar Gala + +commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3 +Author: Marian Balakowicz +Date: Tue May 13 15:53:29 2008 +0200 + + Avoid initrd and logbuffer area overlaps + + Add logbuffer to reserved LMB areas to prevent initrd allocation + from overlaping with it. + + Make sure to use correct logbuffer base address. + + Signed-off-by: Marian Balakowicz + +commit 6956d53d9934862507f83f0e3255dfd4662e7482 +Author: Sascha Laue +Date: Tue May 13 13:29:54 2008 +0200 + + lwmon5: add memory-pattern-test to FPGA POST. + +commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35 +Author: Becky Bruce +Date: Thu May 8 19:02:51 2008 -0500 + + PPC: 86xx Add bat registers to reginfo command + + Signed-off-by: Becky Bruce + +commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9 +Author: Becky Bruce +Date: Fri May 9 15:41:35 2008 -0500 + + PPC: Add print_bats() to lib_ppc/bat_rw.c + + This function prints the values of all the BAT register + pairs - I needed this for debug earlier this week; adding it to + lib_ppc so others can use it (and add it to reginfo commands + if so desired). + + Signed-off-by: Becky Bruce + +commit c148f24c15743a02e855636e6bed013bd121f7f2 +Author: Becky Bruce +Date: Thu May 15 21:29:04 2008 -0500 + + PPC: Change lib_ppc/bat_rw.c to use high bats + + Currently, this code only deals with BATs 0-3, which makes + it useless on systems that support BATs 4-7. Add the + support for these registers. + + Signed-off-by: Becky Bruce + +commit 31d826722434931e1152a09d140187dcf72f8aac +Author: Becky Bruce +Date: Thu May 8 19:02:12 2008 -0500 + + PPC: Create and use CONFIG_HIGH_BATS + + Change all code that conditionally operates on high bat + registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS + instead of the myriad ways this is done now. Define the option + for every config for which high bats are supported (and + enabled by early boot, on parts where they're not always + enabled) + + Signed-off-by: Becky Bruce + +commit aa3b8bf9c30065bb2ea852799d32db5020598495 +Author: Wolfgang Grandegger +Date: Wed May 28 19:55:19 2008 +0200 + + E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter + + Signed-off-by: Wolfgang Grandegger + Signed-off-by: Ben Warren + +commit ff36fbb2e7583fb808eef773f511489c7a9c2df3 +Author: TsiChung Liew +Date: Wed May 28 13:06:25 2008 -0500 + + ColdFire: Add 10 base ethernet support for mcf5445x + + Signed-off-by: TsiChung Liew + Signed-off-by: Ben Warren + +commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba +Author: Jason McMullan +Date: Fri May 30 00:53:38 2008 +0900 + + mips: Add an 'include/asm/errno.h', like all other architectures + + All other u-boot architectures have an include/asm/errno.h, so + this change adds it to the mips include/asm-mips headers also. + + Stolen from Linux 2.6.25. + + Signed-off-by: Jason McMullan + +commit e2ad8426624bac457acc6925b6ff408e9bf20466 +Author: Shinya Kuribayashi +Date: Fri May 30 00:53:38 2008 +0900 + + [MIPS] : Update coprocessor register access macros + + Signed-off-by: Shinya Kuribayashi + +commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194 +Author: Shinya Kuribayashi +Date: Fri May 30 00:53:38 2008 +0900 + + [MIPS] : Update register / bit field definitions + + Signed-off-by: Shinya Kuribayashi + +commit bf462ae450a7f2eeeddc699ed345b391e3263540 +Author: Shinya Kuribayashi +Date: Fri May 30 00:53:37 2008 +0900 + + [MIPS] : CodinygStyle cleanups + + No functional changes. + + Signed-off-by: Shinya Kuribayashi + +commit 89a1550ec6b74452274a7a23127936e2c7eec711 +Author: Jason McMullan +Date: Fri May 30 00:53:37 2008 +0900 + + mips: If CONFIG_CMD_SPI is defined, call spi_init() + + The mips architecture currently does not call 'spi_init()' in the generic + board initialization routine is CONFIG_CMD_SPI is defined. + + This patch rectifies that problem. + + Signed-off-by: Jason McMullan + Signed-off-by: Shinya Kuribayashi + +commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3 +Author: Jason McMullan +Date: Fri May 30 00:53:37 2008 +0900 + + [MIPS] lib_mips/board.c: Add nand_init + + This patch adds the standard 'nand_init()' call to the mips generic + 'board_init_r()' call, bringing MIPS in line with the other architectures. + + Signed-off-by: Jason McMullan + Signed-off-by: Shinya Kuribayashi + +commit d6ac2ed893c2168738aee01579d6283af8d37045 +Author: Scott Wood +Date: Thu May 22 10:49:46 2008 -0500 + + Remove prototypes of nand_init() in favor of including nand.h. + + Likewise with onenand_init(). + + Signed-off-by: Scott Wood + +commit 229c56f07a82eacda8c8720cb146fc9be0f6db54 +Author: Scott Wood +Date: Thu May 22 10:49:00 2008 -0500 + + Make onenand_uboot.h self-sufficient. + + Don't assume types are provided by previously included headers. + + Signed-off-by: Scott Wood + +commit 9723bbb46abb7b2ca24eead5114a3faa58060c20 +Author: Dirk Behme +Date: Wed Jan 16 14:26:59 2008 +0100 + + nand: Correct NAND erase percentage output + + For NAND erase sizes smaller than one NAND erase block, erase + percentage output becomes grater than 100% e.g. + + -- cut -- + > nand info + Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB + > nand erase 0x100000 0x2000 + NAND erase: device 0 offset 0x100000, size 0x2000 + Erasing at 0x100000 -- 200% complete. + OK + > + -- cut -- + + Correct this and give user a warning that more is erased than specified: + + -- cut -- + > nand erase 0x100000 0x2000 + NAND erase: device 0 offset 0x100000, size 0x2000 + Warning: Erase size 0x00002000 smaller than one erase block 0x00004000 + Erasing 0x00004000 instead + Erasing at 0x100000 -- 100% complete. + OK + > + -- cut -- + + Signed-off-by: Dirk Behme + +commit 5922db6c0948506be91e0de44e7a6863a18a417f +Author: Stelian Pop +Date: Tue May 13 17:31:24 2008 +0200 + + Cleanup nand_info[] declaration. + + The nand_info array is declared as extern in several .c files. + Those days, nand.h contains a reference to the array, so there is + no need to declare it elsewhere. + + Signed-off-by: Stelian Pop + Signed-off-by: Scott Wood + +commit 135f0a7488af2947adbe4b40b79280bdfe5e9886 +Author: Scott Wood +Date: Mon May 19 09:30:43 2008 -0500 + + NAND: Provide a sane default for NAND_MAX_CHIPS. + + This allows the header to be included regardless of whether a board's + config file provides NAND-related defininitions. + + Signed-off-by: Scott Wood + +commit a8092c021d27f27f4b323b7d49979ca01b3fc19d +Author: Haavard Skinnemoen +Date: Mon May 26 12:19:10 2008 +0200 + + avr32: Fix theoretical race in udelay() + + If the specified delay is very short, the cycle counter may go past the + "end" time we are waiting for before we get around to reading it. + + Fix it by checking the different between the cycle count "now" and the + cycle count at the beginning. This will work as long as the delay + measured in number of cycles is below 2^31. + + Signed-off-by: Haavard Skinnemoen + +commit 48ea623eae8674793372e3e7c95e72e5a44d7a95 +Author: Haavard Skinnemoen +Date: Wed May 21 13:01:09 2008 +0200 + + avr32: Compile atmel_mci.o conditionally + + Remove #ifdef CONFIG_MMC from the source file and use conditional + compilation in the Makefile instead. + + Signed-off-by: Haavard Skinnemoen + +commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0 +Author: Haavard Skinnemoen +Date: Thu May 22 12:28:25 2008 +0200 + + avr32: Fix wrong error flags in atmel_mci driver + + Make sure we check for CRC errors when sending commands that use CRC + checking. + + Reported-by: Gururaja Hebbar K R + Signed-off-by: Haavard Skinnemoen + +commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49 +Author: Haavard Skinnemoen +Date: Wed May 21 11:10:59 2008 +0200 + + avr32: Fix two warnings in atmel_mci.c + + The warnings are harmless but annoying. Let's fix them. + + Signed-off-by: Haavard Skinnemoen + +commit a23e277c4a3a2bbc42d237aae29da3a8971e757f +Author: Haavard Skinnemoen +Date: Mon May 19 11:36:28 2008 +0200 + + avr32: Rework SDRAM initialization code + + This cleans up the SDRAM initialization and related code a bit, and + allows faster booting. + + * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h + * Remove memory test from sdram_init() and make caller responsible + for verifying the SDRAM and determining its size. + * Remove base_address member from struct sdram_config (was sdram_info) + * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT + * Add support for a common STK1000 hack: 16MB SDRAM instead of 8. + + Signed-off-by: Haavard Skinnemoen + +commit 95107b7c028806919630bf02c653aa8f4f867c94 +Author: Haavard Skinnemoen +Date: Mon May 19 11:27:37 2008 +0200 + + avr32: Do stricter stack checking in the exception handler + + Don't do a stack dump if the stack pointer is outside the memory area + reserved for stack. + + Signed-off-by: Haavard Skinnemoen + +commit caf83ea888a0220f41747d0b7748fa43b4a4bd49 +Author: Haavard Skinnemoen +Date: Fri May 2 15:32:57 2008 +0200 + + avr32: Use the same entry point for reset and exception handling + + Since the reset vector is always aligned to a very large boundary, we + can save a couple of KB worth of alignment padding by placing the + exception vectors at the same address. + + Deciding which one it is is easy: If we're handling an exception, the + CPU is in Exception mode. If we're starting up after reset, the CPU is + in Supervisor mode. So this adds a very minimal overhead to the reset + path (only executed once) and the exception handling path (normally + never executed at all.) + + Signed-off-by: Haavard Skinnemoen + +commit 0c16eed2189a190bd5655b33c029f809a9b31128 +Author: Haavard Skinnemoen +Date: Fri May 2 15:24:22 2008 +0200 + + avr32: Put memset in its own section + + All C code is compiled with -ffunction-sections -fdata-sections. + Assembly functions should get their own sections as well so that + everything looks consistent. + + Signed-off-by: Haavard Skinnemoen + +commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020 +Author: Haavard Skinnemoen +Date: Fri May 2 15:21:40 2008 +0200 + + avr32: Rename pm_init() as clk_init() and make SoC-specific + + pm_init() was always more about clock initialization than anything + else. Dealing with PLLs, clock gating and such is also inherently + SoC-specific, so move it into a SoC-specific directory. + + Signed-off-by: Haavard Skinnemoen + +commit 4f5972c3b2454c22957f2842cfe64ec8118e015b +Author: Haavard Skinnemoen +Date: Wed Apr 30 16:15:57 2008 +0200 + + avr32: Use new-style Makefile for the at32ap platform + + This makes it easier to avoid compiling certain files later. + + Signed-off-by: Haavard Skinnemoen + +commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213 +Author: Haavard Skinnemoen +Date: Wed Apr 30 14:36:47 2008 +0200 + + avr32: Remove unused file cpu/at32ap/pm.c + + Signed-off-by: Haavard Skinnemoen + +commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2 +Author: Haavard Skinnemoen +Date: Wed Apr 30 14:19:28 2008 +0200 + + avr32: Clean up the HMATRIX code + + Rework the HMATRIX configuration interface so that it becomes easier + to configure the HMATRIX for boards with special needs, and add new + parts. + + The HMATRIX header file has been split into a general, + chip-independent part with register definitions, etc. and a + chip-specific part with SFR bitfield definitions and master/slave + identifiers. + + Signed-off-by: Haavard Skinnemoen + +commit 0a2e48792dd372c90b80059f3235e67a567e16fc +Author: Haavard Skinnemoen +Date: Thu Nov 22 12:14:11 2007 +0100 + + avr32: Add support for the ATSTK1006 board + + This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on + board. It's currently in production and will be available soon. + + Signed-off-by: Haavard Skinnemoen + +commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440 +Author: Haavard Skinnemoen +Date: Tue Apr 29 12:53:05 2008 +0200 + + avr32: Get rid of the .flashprog section + + The .flashprog section was only needed back when we were running + directly from flash, and it's even more useless on NGW100 since it + uses the CFI flash driver which never used this workaround in the + first place. + + Remove it on STK1000 as well, and get rid of all the associated code and + annotations. + + Signed-off-by: Haavard Skinnemoen + +commit cdd42c0c7a5205fc380912d83229069a71ea3abf +Author: Haavard Skinnemoen +Date: Wed Apr 30 13:09:56 2008 +0200 + + avr32: Use correct condition around macb clock accessors + + get_macb_pclk_rate() and get_macb_hclk_rate() should be available when + the chip has a MACB controller, not when it has a USART. + + Signed-off-by: Haavard Skinnemoen + +commit f793a3581901ff39c2abb94012d9bbc8573ccf02 +Author: David Brownell +Date: Wed Apr 16 22:57:58 2008 -0700 + + avr32: Disable the AP7000 internal watchdog on startup + + This patch forces the watchdog off in all cases. That will at least + get rid of the constant reboot cycle, though it won't let the watchdog + actually run in the new kernels: its probe() comes up with a polite + warning. + + Signed-off-by: Haavard Skinnemoen + +commit 55ac7a7490b55da56659f95d82a0c83b9756df27 +Author: David Brownell +Date: Fri Feb 22 12:54:39 2008 -0800 + + avr32: stk1002 and ngw100 convergence + + Make STK1002 and NGW100 boards act more alike: + - STK boards can use as many arguments as NGW + - STK boards don't need to manage FPGAs either + - NGW commands should match STK ones + + Also spell U-Boot right in prompts for STK1002 and NGW100. + + Signed-off-by: David Brownell + [haavard.skinnemoen@atmel.com: update STK100[34] as well] + Signed-off-by: Haavard Skinnemoen + +commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54 +Author: Sergei Poselenov +Date: Tue May 27 13:47:00 2008 +0200 + + Socrates: Fix PCI bus frequency report + + Signed-off-by: Sergei Poselenov + +commit 791e1dba8de76ad8e762a7badb869f224a1f8b82 +Author: Sergei Poselenov +Date: Tue May 27 11:49:13 2008 +0200 + + Socrates: Added USB support. + + Signed-off-by: Sergei Poselenov + +commit 5a904e5637cff1d708dc67098004f83ba9e84c54 +Author: Sergei Poselenov +Date: Tue May 27 11:35:02 2008 +0200 + + USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO + + In case of several PCI USB controllers on a board this variable + specifys which controller to use. + See doc/README.generic_usb_ohci for details. + + Signed-off-by: Sergei Poselenov + +commit 2f7468aeba60e1288030a8d007c4e63bd3f13221 +Author: Sergei Poselenov +Date: Tue May 27 10:36:07 2008 +0200 + + Socrates: add support for DS75 Digital Thermo Sensor on I2C bus. + + Signed-off-by: Sergei Poselenov + +commit 83e9d7a2614d4006b92690afa3390c291734267e +Author: Sergei Poselenov +Date: Mon May 26 18:16:04 2008 +0200 + + Socrates: Config file cleanup. + + Signed-off-by: Sergei Poselenov + +commit 602cac1389b755b223272f2328a47e6f8c240848 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat May 24 12:47:46 2008 +0200 + + MAKEALL: add at91 list + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0 +Author: Ron Madrid +Date: Fri May 23 15:37:05 2008 -0700 + + Add Marvell 88E1118 support for TSEC + + Signed-off-by: Ron Madrid + Signed-off-by: Ben Warren + +commit 557b377d8bfc8b833b6e749457bcdfa298331a24 +Author: Jens Gehrlein +Date: Mon May 5 14:06:11 2008 +0200 + + smc911x: add 16 bit support + + Signed-off-by: Jens Gehrlein + Signed-off-by: Ben Warren + +commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596 +Author: Christian Eggers +Date: Wed May 21 22:12:00 2008 +0200 + + USB: replace old swap_ with proper endianess conversion macros + + Signed-off-by: Christian Eggers + Signed-off-by: Markus Klotzbuecher + +commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c +Author: Christian Eggers +Date: Wed May 21 21:29:10 2008 +0200 + + Fix endianess conversion in usb_ohci.c + + Signed-off-by: Christian Eggers + Signed-off-by: Markus Klotzbuecher + +commit 477434c63c2ea5baa5c6c4e43500786f436511ff +Author: Sergei Poselenov +Date: Thu May 22 01:15:53 2008 +0200 + + USB: add support for multiple PCI OHCI controllers + + Add new configuration variable CONFIG_PCI_OHCI_DEVNO. + In case of several PCI USB controllers on a board this variable + specifys which controller to use. + + Also add USB support for sokrates board. + + See doc/README.generic_usb_ohci for details. + + Signed-off-by: Sergei Poselenov + Signed-off-by: Markus Klotzbuecher + +commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77 +Author: Wolfgang Denk +Date: Wed May 21 16:56:08 2008 +0200 + + Fix some whitespace issues + + introduced by 53677ef18 "Big white-space cleanup." + + Signed-off-by: Wolfgang Denk + +commit 4416603aeb06861b468b06a981e52c3ff805db7b +Author: York Sun +Date: Mon May 12 14:36:39 2008 -0500 + + Make ads5121 out-of-tree compiling safe + + Reuse the existing DIU driver in board/freescale/common. + + Signed-off-by: York Sun + +commit 0e1bad47cd345c76c91a64caf41011e431b62599 +Author: York Sun +Date: Mon May 5 10:20:01 2008 -0500 + + Adding DIU support for Freescale 5121ADS + + Add DIU and cfb console support to FSL 5121ADS board. + + Use #define CONFIG_VIDEO in config file to enable fb console. + + Signed-off-by: York Sun + +commit a48ff68d235e671176f6b496c44246dbe5e0a93f +Author: York Sun +Date: Mon May 5 10:20:00 2008 -0500 + + Replace DPRINTF with debug + + Remove DPRINTF macro and replace it with generic debug macro. + + Signed-off-by: York Sun + +commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d +Author: York Sun +Date: Mon May 5 10:19:59 2008 -0500 + + Move pixel clock setting to board file + + The clock divider has different format in 5121 and 8610. This patch moves it to + board specific code. + + Signed-off-by: York Sun + +commit 53677ef18e25c97ac613349087c5cb33ae5a2741 +Author: Wolfgang Denk +Date: Tue May 20 16:00:29 2008 +0200 + + Big white-space cleanup. + + This commit gets rid of a huge amount of silly white-space issues. + Especially, all sequences of SPACEs followed by TAB characters get + removed (unless they appear in print statements). + + Also remove all embedded "vim:" and "vi:" statements which hide + indentation problems. + + Signed-off-by: Wolfgang Denk + +commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b +Author: Sergei Poselenov +Date: Thu May 8 17:46:23 2008 +0200 + + socrates: fix second TSEC configuration (it is actually TSEC3) + + Signed-off-by: Sergei Poselenov + +commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f +Author: Sergei Poselenov +Date: Thu May 8 14:17:08 2008 +0200 + + Fixed reset for socrates + + Signed-off-by: Sergei Poselenov + +commit e18575d5f589a62e19c70d471d4b4e27cad3af56 +Author: Sergei Poselenov +Date: Wed May 7 15:10:49 2008 +0200 + + socrates: changes to support FDT + + Signed-off-by: Sergei Poselenov + Signed-off-by: Wolfgang Denk + +commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0 +Author: Sergei Poselenov +Date: Wed Apr 30 11:42:50 2008 +0200 + + Initial support for "Socrates" board + + Signed-off-by: Sergei Poselenov + +commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b +Author: Yuri Tikhonov +Date: Thu May 8 15:46:42 2008 +0200 + + POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags. + + This way we become able to utilize the full post_log_word for POST + activities (overwise, POST ECC, which has 0x8000 ID, could be + erroneously treated as started in post_output_backlog() even if there + was actually no POST ECC run (because of OCM POST failure, for + example). + + Signed-off-by: Yuri Tikhonov + +commit 7845d49094c81321021b50a4dbb8864d2f3777e4 +Author: Yuri Tikhonov +Date: Thu May 8 15:46:02 2008 +0200 + + POST: mark OCM test as POST_STOP + + Signed-off-by: Ilya Yanok + +commit 28a385065882d6cb6ac5f443311ff87887ed7c13 +Author: Yuri Tikhonov +Date: Thu May 8 15:45:26 2008 +0200 + + POST: add POST_STOP flag + + Don't run futher tests in case of a test fails that is marked as + POST_STOP. + + Signed-off-by: Ilya Yanok + Signed-off-by: Yuri Tikhonov + +commit a525145d8110d15b4389d23c3ea8a78f22509d3f +Author: Yuri Tikhonov +Date: Thu May 8 15:44:16 2008 +0200 + + POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround) + + Switch the OCM testid with the codec one. The reason is that current + implementation requires the POST_ROM testid to fit into lower 16 + bits, and the codec test will never run with POST_ROM hopefully. + + Signed-off-by: Ilya Yanok + +commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd +Author: Yuri Tikhonov +Date: Thu May 8 15:43:28 2008 +0200 + + lwmon5: enable OCM post test on lwmon5 board + + Signed-off-by: Ilya Yanok + +commit 6e8ec682268493b8d098f99e17b1ce71b4448977 +Author: Yuri Tikhonov +Date: Thu May 8 15:42:47 2008 +0200 + + POST: OCM test added. + + Added OCM test to POST layer. This version runs before all other tests + but doesn't yet interrupt post sequence on failure. + + Signed-off-by: Ilya Yanok + Signed-off-by: Yuri Tikhonov + +commit 6891260bdd935a382c95d9fa333922b0dfded68a +Author: Yuri Tikhonov +Date: Thu May 8 15:40:39 2008 +0200 + + POST: typo fix + + Signed-off-by: Ilya Yanok + +commit 727f63334676e760877d43bfb8f0e9331ac8b101 +Author: Hebbar +Date: Tue May 20 02:16:36 2008 -0700 + + common/usb.c: fix incorrect escape sequence + + Signed off by: Gururaja Hebbar + +commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa +Author: York Sun +Date: Thu May 15 15:26:27 2008 -0500 + + Fix 8313ERDB board configuration + + Change LCRR clock ratio from 2 to 4 to commodate VSC7385. + Correct TSEC1 vs TSEC2 assignment. + Define ETHADDR and ETH1ADDR always. + + Signed-off-by: York Sun + Signed-off-by: Timur Tabi + +commit 2c289e320dcfb3760e99cf1d765cb067194a1202 +Author: Jon Loeliger +Date: Mon May 19 09:47:25 2008 -0500 + + mpc86xx: Removed unused and unconfigured memory test code. + + Besides, other common code exists. + + Signed-off-by: Jon Loeliger + +commit 180a90abdae72587c0f679edf8991455e559440d +Author: Wolfgang Denk +Date: Mon May 19 12:47:11 2008 +0200 + + Release v1.3.3 + + Update CHANGELOG for release. + + Signed-off-by: Wolfgang Denk + commit 16bedc661de0dae767b1377d8413373a3fbcfa79 Author: Stefan Roese Date: Mon May 19 07:14:38 2008 +0200 @@ -88,6 +2840,17 @@ Date: Wed May 14 23:34:53 2008 +0200 Signed-off-by: Wolfgang Denk +commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf +Author: Gary Jennejohn +Date: Wed May 14 13:39:22 2008 +0200 + + ppc4xx: QUAD100HD: Allow the environment to be put into flash. + + After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also + use a redundant environment. + + Signed-off-by: Gary Jennejohn + commit cda2a4a9961fd4341b7db305cb22fc05957e8b77 Author: Wolfgang Denk Date: Wed May 14 13:55:30 2008 +0200 @@ -166,6 +2929,19 @@ Date: Tue May 13 23:15:52 2008 +0200 Signed-off-by: Wolfgang Denk +commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4 +Author: Stelian Pop +Date: Tue May 13 17:31:24 2008 +0200 + + Cleanup nand_info[] declaration. + + The nand_info array is declared as extern in several .c files. + Those days, nand.h contains a reference to the array, so there is + no need to declare it elsewhere. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + commit 70fab1908fc1734a403711eaabbef546bc4b77dc Author: Stefan Roese Date: Tue May 13 20:22:01 2008 +0200 @@ -221,6 +2997,308 @@ Date: Sun May 11 23:13:57 2008 +0200 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD +commit 67e3beb52c320b0a31cf030716c99392cde2d532 +Author: Stelian Pop +Date: Fri May 9 21:46:51 2008 +0200 + + AT91: Cleanup unused config header file definitions. + + CONFIG_ENV_OVERWRITE is commented out in the config header files, + so let's cleanup the files by removing the whole definition. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 19883aede2ac0a522493bfb2b35a7dbb200071b1 +Author: Stelian Pop +Date: Thu May 8 14:52:34 2008 +0200 + + Support AT91CAP9 revC CPUs + + The AT91CAP9 revC CPU has a few differences over the previous, + revB CPU which was distributed in small quantities only (revA was + an internal Atmel product only). + + The revC silicon needs a special initialisation sequence to + switch from the internal (imprecise) RC oscillator to the + external 32k clock. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 098b7b4b441b12c2a64dd517930f43c793542759 +Author: Stelian Pop +Date: Thu May 8 14:52:33 2008 +0200 + + Use custom logo for Atmel boards + + This patch adds a custom vendor logo for the Atmel AT91 boards. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 761c70b80cdd3bead40146b96a8e713d6ae01632 +Author: Stelian Pop +Date: Thu May 8 14:52:32 2008 +0200 + + AT91SAM9RLEK: hook up the ATMEL LCD driver + + This patch makes the necessary adaptations (PIO configurations and + defines in config header file) to hook up the Atmel LCD driver to the + AT91SAM9RLEK board. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f +Author: Stelian Pop +Date: Thu May 8 14:52:31 2008 +0200 + + AT91SAM9263EK: hook up the ATMEL LCD driver + + This patch makes the necessary adaptations (PIO configurations and + defines in config header file) to hook up the Atmel LCD driver to the + AT91SAM9263EK board. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 820f2a958325061a446115f3035e48e4726b3390 +Author: Stelian Pop +Date: Thu May 8 14:52:30 2008 +0200 + + AT91SAM9261EK: hook up the ATMEL LCD driver + + This patch makes the necessary adaptations (PIO configurations and + defines in config header file) to hook up the Atmel LCD driver to the + AT91SAM9261EK board. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit c139b17d20c8371c1e0a8d7fb27c11050cf86304 +Author: Stelian Pop +Date: Thu May 8 14:52:29 2008 +0200 + + AT91CAP9ADK: hook up the ATMEL LCD driver + + This patch makes the necessary adaptations (PIO configurations and + defines in config header file) to hook up the Atmel LCD driver to the + AT91CAP9ADK board. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 39cf480484fcce5c04a590ee1c30be0c17b02c34 +Author: Stelian Pop +Date: Fri May 9 21:57:18 2008 +0200 + + Add ATMEL LCD driver + + This patch adds support for the ATMEL LCDC driver which is used on some + AT91 and AVR platforms. + + Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and + AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 2118ebb44dc40f8117c94950fd95799a9ef821b2 +Author: Stelian Pop +Date: Thu May 8 18:52:25 2008 +0200 + + AT91SAM9RLEK support + + This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK + board. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 8e429b3eee23927c1222679f6b6f53667b21595c +Author: Stelian Pop +Date: Thu May 8 18:52:23 2008 +0200 + + AT91SAM9263EK support + + This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK + board. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit d99a8ff66d8ae87e5c87590ed2e4ead629540607 +Author: Stelian Pop +Date: Thu May 8 20:52:22 2008 +0200 + + AT91SAM9261EK support + + This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK + board. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 86c8c8a414988c50104a3b02c29f50af2be738c0 +Author: Stelian Pop +Date: Thu May 8 20:52:21 2008 +0200 + + AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND + + This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND + in order to cope with the changes in DataFlash partitionning scheme + (cset c3a60cb3). + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 96996ac25d5222611a8888968db6e53a6d3726da +Author: Stelian Pop +Date: Thu May 8 20:52:20 2008 +0200 + + AT91SAM9260EK: Normalize BOOTARGS + + This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from + DataFlash or from NAND), and gives to Linux a fully specified mtdparts + variable. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a +Author: Stelian Pop +Date: Thu May 8 20:52:19 2008 +0200 + + AT91SAM9260EK: Normalize SPI timings + + This patch changes the SPI timings to closely match the ones + used by the Linux kernel and the Atmel's own bootstrap project. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935 +Author: Stelian Pop +Date: Thu May 8 20:52:18 2008 +0200 + + AT91SAM9260EK: Handle 8 or 16 bit NAND + + The Atmel boards can handle 8 or 16 bit NAND memories. This patch + makes the support configurable in the board config header file + (CFG_NAND_DBW_8 or CFG_NAND_DBW_16). + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit ab52640fc01624e208424e527af0b7b3a5a65a12 +Author: Stelian Pop +Date: Thu May 8 20:52:17 2008 +0200 + + AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND + + This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND + in order to cope with the changes in DataFlash partitionning scheme + (cset c3a60cb3). + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270 +Author: Stelian Pop +Date: Thu May 8 20:52:16 2008 +0200 + + AT91CAP9ADK: Normalize BOOTARGS + + This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from + DataFlash or from NAND), and gives to Linux a fully specified mtdparts + variable. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 93da48b910511911ce110656e17ed733c8ac4c45 +Author: Stelian Pop +Date: Thu May 8 20:52:15 2008 +0200 + + AT91CAP9ADK: Normalize SPI timings + + This patch changes the SPI timings to closely match the ones + used by the Linux kernel and the Atmel's own bootstrap project. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0 +Author: Stelian Pop +Date: Thu May 8 20:52:14 2008 +0200 + + AT91CAP9ADK: Handle 8 or 16 bit NAND + + The Atmel boards can handle 8 or 16 bit NAND memories. This patch + makes the support configurable in the board config header file + (CFG_NAND_DBW_8 or CFG_NAND_DBW_16). + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 11b162bae058e96c7929e358d4adff2bee6c2cc4 +Author: Stelian Pop +Date: Thu May 8 20:52:13 2008 +0200 + + Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms + + All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch + below avoids the duplication of u-boot.lds by putting the file in the + cpu directory instead of the board one. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece +Author: Stelian Pop +Date: Thu May 8 20:52:12 2008 +0200 + + Add proper copyright notices in Atmel boards Makefiles + + The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete + copyright notice. This patch adds the missing pieces. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit e817a042cef6164bf26fee86f90326f2ec9e6745 +Author: Stelian Pop +Date: Thu May 8 20:52:11 2008 +0200 + + Add copyright information in Atmel boards partition.c + + When Ulf did the dataflash.c cleanup, he didn't add his copyright on + the new created files. This patch fixes the problem. + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19 +Author: Stelian Pop +Date: Thu May 8 20:52:10 2008 +0200 + + Update origin and copyright information in arch-at91sam9 header files + + When doing the AT91CAP9/AT91SAM9 port, a number of header files were + copied from the Linux kernel sources. This patch explicitly specifies + this origin for all the copied headers, and for those missing copyright + information, adds it. + + Additionaly, the header file 'at91sam926x_mc.h' has been superceeded + in the latest kernel sources by 'at91sam9_smc.h'. + + The copyright information has been confirmed by the AT91 Linux kernel + maintainer, Andrew Victor . + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + commit 79dd1712689d6a5031d7cbff54957049680751c7 Author: Markus Klotzbücher Date: Thu May 8 16:00:55 2008 +0200 @@ -556,6 +3634,32 @@ Date: Fri May 9 10:16:13 2008 +0200 Signed-off-by: Wolfgang Denk +commit 567fb852178dbf59529d7301620a3f3732a4b02d +Author: Stelian Pop +Date: Thu May 8 22:52:09 2008 +0200 + + Fix @ -> substitution + + When applying the AT91CAP9 patches upstream, something transformed + the '@' character into the ' ' sequence. + + The patch below restores the original form in all the places where + it has been modified (the AT91CAP9 files, the AT91SAM9260 files which + were copied from AT91CAP9, and a couple of other files where the + ' ' sequence was present). + + Signed-off-by: Stelian Pop + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 73ccb3410a0785593cda7aee455dfc51f790e281 +Author: Gary Jennejohn +Date: Mon Apr 28 14:04:32 2008 +0200 + + ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board + + Signed-off-by: Gary Jennejohn + Signed-off-by: Stefan Roese + commit ef2642625cbfb1c3695e3478d08ae515052a4950 Author: Stefan Roese Date: Thu May 8 11:10:46 2008 +0200 @@ -7221,7 +10325,7 @@ Date: Mon Mar 3 11:57:23 2008 +0000 Originally pointed out by Laurent Pinchart , see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846 - Signed-off-by: Bernhard Nemec + Signed-off-by: Bernhard Nemec ganssloser.com> commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8 Author: Kim B. Heino @@ -8451,7 +11555,7 @@ Date: Mon Feb 18 14:01:56 2008 -0600 86xx: Convert sbc8641d to use libfdt. This is the proper fix for a missing closing brace in the function - ft_cpu_setup() noticed by joe.hamman@embeddedspecialties.com. + ft_cpu_setup() noticed by joe.hamman embeddedspecialties.com. The ft_cpu_setup() function in mpc8641hpcn.c should have been removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE, but was missed. Only, the sbc8641d was nominally still using it. @@ -8846,7 +11950,7 @@ Date: Fri Feb 22 11:40:50 2008 +0000 We already have a vendor subdir for Atmel, so we should use it. - Signed-off-by: Haavard Skinnemoen + Signed-off-by: Haavard Skinnemoen atmel.com> commit 6d0943a6be99977d6d853d51749e9963d68eb192 Author: Andreas Engel @@ -8896,8 +12000,8 @@ Date: Thu Jan 3 21:15:56 2008 +0000 AT91CAP9 support : MACB changes - Signed-off-by: Stelian Pop - Acked-by: Haavard Skinnemoen + Signed-off-by: Stelian Pop popies.net> + Acked-by: Haavard Skinnemoen atmel.com> commit 6afcabf11d7321850f4feaadfee841488ace54c5 Author: Stelian Pop @@ -8913,7 +12017,7 @@ Date: Wed Jan 30 21:15:54 2008 +0000 AT91CAP9 support : cpu/ files - Signed-off-by: Stelian Pop + Signed-off-by: Stelian Pop popies.net> commit fa506a926cec348805143576c941f8e61b333cc0 Author: Stelian Pop