From: FUKAUMI Naoki Date: Tue, 8 Nov 2016 13:45:00 +0000 (+0900) Subject: ar71xx: add support for Buffalo BHR-4GRV2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=016520330440cb0aca4367150911721b748f75e8;p=openwrt%2Fstaging%2Fneocturne.git ar71xx: add support for Buffalo BHR-4GRV2 Signed-off-by: FUKAUMI Naoki --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 1708abf53c..16135a36a6 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -57,6 +57,10 @@ ap147-010) ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02" ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt" ;; +bhr-4grv2) + ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1" + ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0" + ;; bsb) ucidef_set_led_default "sys" "SYS" "$board:red:sys" "1" ;; diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 24dfced4ae..df87c96a3f 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -164,6 +164,7 @@ ar71xx_setup_interfaces() ;; ap135-020|\ ap136-020|\ + bhr-4grv2|\ tew-823dru|\ tl-wr1043nd-v2|\ wzr-450hp2) diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 881b3c65e5..bfd619a211 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -53,6 +53,11 @@ get_status_led() { aw-nr580) status_led="$board:green:ready" ;; + bhr-4grv2|\ + wzr-hp-ag300h|\ + wzr-hp-g300nh2) + status_led="buffalo:red:diag" + ;; bsb) status_led="$board:red:sys" ;; @@ -393,10 +398,6 @@ get_status_led() { wlae-ag300n) status_led="buffalo:green:status" ;; - wzr-hp-ag300h|\ - wzr-hp-g300nh2) - status_led="buffalo:red:diag" - ;; r6100|\ wndap360|\ wndr3700|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 75542470ba..9495bf449a 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -482,6 +482,9 @@ ar71xx_board_detect() { *AW-NR580) name="aw-nr580" ;; + *BHR-4GRV2) + name="bhr-4grv2" + ;; *CAP324) name="cap324" ;; diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx index c4177e1099..e2a70b82dd 100644 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx +++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx @@ -16,6 +16,7 @@ set_preinit_iface() { ap83 |\ archer-c5 |\ archer-c7 |\ + bhr-4grv2 |\ dir-505-a1 |\ gl-inet |\ jwap003 |\ diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index c4a9f8a9f1..2358c58c8f 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -263,6 +263,7 @@ platform_check_image() { ap152|\ ap96|\ arduino-yun|\ + bhr-4grv2|\ bxu2000n-2-a1|\ db120|\ dr344|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 4fe80f015c..aa20f9b238 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -53,6 +53,7 @@ CONFIG_ATH79_MACH_AP96=y CONFIG_ATH79_MACH_ARCHER_C7=y CONFIG_ATH79_MACH_ARDUINO_YUN=y CONFIG_ATH79_MACH_AW_NR580=y +CONFIG_ATH79_MACH_BHR_4GRV2=y CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y CONFIG_ATH79_MACH_BSB=y CONFIG_ATH79_MACH_C55=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index db3b9bd076..ac8255b8a3 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -271,6 +271,14 @@ config ATH79_MACH_SOM9331 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_BHR_4GRV2 + bool "Buffalo BHR-4GRV2 board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + config ATH79_MACH_WHR_HP_G300N bool "Buffalo WHR-HP-G300N board support" select SOC_AR724X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 580d2e249f..78e242a6fb 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o +obj-$(CONFIG_ATH79_MACH_BHR_4GRV2) += mach-bhr-4grv2.o obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A) += mach-bhu-bxu2000n2-a.o obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o obj-$(CONFIG_ATH79_MACH_C55) += mach-c55.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c new file mode 100644 index 0000000000..5b4cf5ff2f --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c @@ -0,0 +1,171 @@ +/* + * Buffalo BHR-4GRV2 board support + * + * Copyright (c) 2012 Qualcomm Atheros + * Copyright (c) 2012-2013 Gabor Juhos + * Copyright (c) 2016 FUKAUMI Naoki + * + * Based on mach-ap136.c and mach-wzr-450hp2.c + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include + +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +#define BHR_4GRV2_GPIO_LED_VPN_RED 3 +#define BHR_4GRV2_GPIO_LED_VPN_GREEN 18 +#define BHR_4GRV2_GPIO_LED_POWER_GREEN 19 +#define BHR_4GRV2_GPIO_LED_DIAG_RED 20 + +#define BHR_4GRV2_GPIO_BTN_RESET 17 +#define BHR_4GRV2_GPIO_BTN_ECO 21 + +#define BHR_4GRV2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL (3 * BHR_4GRV2_KEYS_POLL_INTERVAL) +#define BHR_4GRV2_MAC0_OFFSET 0 +#define BHR_4GRV2_MAC1_OFFSET 6 + +static struct gpio_led bhr_4grv2_leds_gpio[] __initdata = { + { + .name = "buffalo:red:vpn", + .gpio = BHR_4GRV2_GPIO_LED_VPN_RED, + .active_low = 1, + }, + { + .name = "buffalo:green:vpn", + .gpio = BHR_4GRV2_GPIO_LED_VPN_GREEN, + .active_low = 1, + }, + { + .name = "buffalo:green:power", + .gpio = BHR_4GRV2_GPIO_LED_POWER_GREEN, + .active_low = 1, + }, + { + .name = "buffalo:red:diag", + .gpio = BHR_4GRV2_GPIO_LED_DIAG_RED, + .active_low = 1, + } +}; + +static struct gpio_keys_button bhr_4grv2_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL, + .gpio = BHR_4GRV2_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "ECO button", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL, + .gpio = BHR_4GRV2_GPIO_BTN_ECO, + .active_low = 1, + }, +}; + +/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ +static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_SGMII, + .sgmii_delay_en = true, +}; + +/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */ +static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad6_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_platform_data bhr_4grv2_ar8327_data = { + .pad0_cfg = &bhr_4grv2_ar8327_pad0_cfg, + .pad6_cfg = &bhr_4grv2_ar8327_pad6_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .port6_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info bhr_4grv2_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &bhr_4grv2_ar8327_data, + }, +}; + +static void __init bhr_4grv2_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(bhr_4grv2_leds_gpio), + bhr_4grv2_leds_gpio); + ath79_register_gpio_keys_polled(-1, BHR_4GRV2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(bhr_4grv2_gpio_keys), + bhr_4grv2_gpio_keys); + + mdiobus_register_board_info(bhr_4grv2_mdio0_info, + ARRAY_SIZE(bhr_4grv2_mdio0_info)); + ath79_register_mdio(0, 0x0); + + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); + + /* GMAC0 is connected to the RGMII interface */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x56000000; + + ath79_init_mac(ath79_eth0_data.mac_addr, art + BHR_4GRV2_MAC0_OFFSET, 0); + ath79_register_eth(0); + + /* GMAC1 is connected to the SGMII interface */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_pll_data.pll_1000 = 0x03000101; + + ath79_init_mac(ath79_eth1_data.mac_addr, art + BHR_4GRV2_MAC1_OFFSET, 0); + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_BHR_4GRV2, "BHR-4GRV2", + "Buffalo BHR-4GRV2", bhr_4grv2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 3ebcbc0de5..dec3d6014b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -44,6 +44,7 @@ enum ath79_mach_type { ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */ ATH79_MACH_ARDUINO_YUN, /* Yun */ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ + ATH79_MACH_BHR_4GRV2, /* Buffalo BHR-4GRV2 */ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ ATH79_MACH_BSB, /* Smart Electronics Black Swift board */ ATH79_MACH_C55, /* AirTight Networks C-55 */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index ae0c7fcae1..d6142c1a5c 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -626,3 +626,24 @@ define Device/dap-2695-a1 endef TARGET_DEVICES += dap-2695-a1 + +define Build/mkbuffaloimg + $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \ + -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \ + -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \ + -i $@ -o $@.new + mv $@.new $@ +endef + +define Device/bhr-4grv2 + DEVICE_TITLE := Buffalo BHR-4GRV2 + BOARDNAME := BHR-4GRV2 + ROOTFS_SIZE := 14528k + KERNEL_SIZE := 1472k + IMAGE_SIZE := 16000k + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) + IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | mkbuffaloimg +endef +TARGET_DEVICES += bhr-4grv2 diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile index 320d1db527..1cfc8856b1 100644 --- a/tools/firmware-utils/Makefile +++ b/tools/firmware-utils/Makefile @@ -77,6 +77,7 @@ define Host/Compile $(call cc,mkmerakifw sha1, -Wall) $(call cc,mkmerakifw-old, -Wall) $(call cc,jcgimage, -lz -Wall) + $(call cc,mkbuffaloimg, -Wall) endef define Host/Install diff --git a/tools/firmware-utils/src/mkbuffaloimg.c b/tools/firmware-utils/src/mkbuffaloimg.c new file mode 100644 index 0000000000..364dda005b --- /dev/null +++ b/tools/firmware-utils/src/mkbuffaloimg.c @@ -0,0 +1,223 @@ +/* + * Copyright (C) 2009 Gabor Juhos + * Copyright (C) 2016 FUKAUMI Naoki + * + * Based on mkdniimg.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include /* for unlink() */ +#include +#include /* for getopt() */ +#include +#include +#include + +#define DNI_HDR_LEN 128 + +/* + * Globals + */ +static char *ifname; +static char *progname; +static char *ofname; +static char *version = "0.00_0.00"; +static char *region = "JP"; +static char *rootfs_size; +static char *kernel_size; + +static char *board_id; +/* + * Message macros + */ +#define ERR(fmt, ...) do { \ + fflush(0); \ + fprintf(stderr, "[%s] *** error: " fmt "\n", \ + progname, ## __VA_ARGS__ ); \ +} while (0) + +#define ERRS(fmt, ...) do { \ + int save = errno; \ + fflush(0); \ + fprintf(stderr, "[%s] *** error: " fmt ": %s\n", \ + progname, ## __VA_ARGS__, strerror(save)); \ +} while (0) + +void usage(int status) +{ + FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout; + + fprintf(stream, "Usage: %s [OPTIONS...]\n", progname); + fprintf(stream, +"\n" +"Options:\n" +" -B create image for the board specified with \n" +" -i read input from the file \n" +" -o write output to the file \n" +" -v set image version to \n" +" -r set image region to \n" +" -R set RootfsSize to \n" +" -K set KernelSize to \n" +" -h show this screen\n" + ); + + exit(status); +} + +int main(int argc, char *argv[]) +{ + int res = EXIT_FAILURE; + int buflen; + int err; + struct stat st; + char *buf; + int i; + uint8_t csum; + + FILE *outfile, *infile; + + progname = basename(argv[0]); + + while ( 1 ) { + int c; + + c = getopt(argc, argv, "B:i:o:v:r:R:K:h"); + if (c == -1) + break; + + switch (c) { + case 'B': + board_id = optarg; + break; + case 'i': + ifname = optarg; + break; + case 'o': + ofname = optarg; + break; + case 'v': + version = optarg; + break; + case 'r': + region = optarg; + break; + case 'R': + rootfs_size = optarg; + break; + case 'K': + kernel_size = optarg; + break; + case 'h': + usage(EXIT_SUCCESS); + break; + default: + usage(EXIT_FAILURE); + break; + } + } + + if (board_id == NULL) { + ERR("no board specified"); + goto err; + } + + if (rootfs_size == NULL) { + ERR("no rootfs_size specified"); + goto err; + } + + if (kernel_size == NULL) { + ERR("no kernel_size specified"); + goto err; + } + + if (ifname == NULL) { + ERR("no input file specified"); + goto err; + } + + if (ofname == NULL) { + ERR("no output file specified"); + goto err; + } + + err = stat(ifname, &st); + if (err){ + ERRS("stat failed on %s", ifname); + goto err; + } + + buflen = st.st_size + DNI_HDR_LEN + 1; + buf = malloc(buflen); + if (!buf) { + ERR("no memory for buffer\n"); + goto err; + } + + memset(buf, 0, DNI_HDR_LEN); + snprintf(buf, DNI_HDR_LEN, "device:%s\nversion:%s\nregion:%s\n" + "RootfsSize:%s\nKernelSize:%s\nInfoHeadSize:128\n", + board_id, version, region, rootfs_size, kernel_size); + buf[DNI_HDR_LEN - 2] = 0x12; + buf[DNI_HDR_LEN - 1] = 0x32; + + infile = fopen(ifname, "r"); + if (infile == NULL) { + ERRS("could not open \"%s\" for reading", ifname); + goto err_free; + } + + errno = 0; + fread(buf + DNI_HDR_LEN, st.st_size, 1, infile); + if (errno != 0) { + ERRS("unable to read from file %s", ifname); + goto err_close_in; + } + + csum = 0; + for (i = 0; i < (st.st_size + DNI_HDR_LEN); i++) + csum += buf[i]; + + csum = 0xff - csum; + buf[st.st_size + DNI_HDR_LEN] = csum; + + outfile = fopen(ofname, "w"); + if (outfile == NULL) { + ERRS("could not open \"%s\" for writing", ofname); + goto err_close_in; + } + + errno = 0; + fwrite(buf, buflen, 1, outfile); + if (errno) { + ERRS("unable to write to file %s", ofname); + goto err_close_out; + } + + res = EXIT_SUCCESS; + + fflush(outfile); + + err_close_out: + fclose(outfile); + if (res != EXIT_SUCCESS) { + unlink(ofname); + } + + err_close_in: + fclose(infile); + + err_free: + free(buf); + + err: + return res; +}