From: Martin Kelly Date: Sat, 2 Feb 2019 21:55:58 +0000 (-0800) Subject: dt-bindings: fix incorrect bmi160 IRQ note X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=015f80fffc3267fcac07761bea220eb780fbcb61;p=openwrt%2Fstaging%2Fblogic.git dt-bindings: fix incorrect bmi160 IRQ note The bmi160 bindings say that the BMI160 requires level-triggered, active-low interrupts, but it actually supports all interrupt types, so fix the note to reflect that. Reviewed-by: Rob Herring Signed-off-by: Martin Kelly Signed-off-by: Jonathan Cameron --- diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt index 0c1c105fb503..1aec19997fb5 100644 --- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt +++ b/Documentation/devicetree/bindings/iio/imu/bmi160.txt @@ -9,7 +9,7 @@ Required properties: - spi-max-frequency : set maximum clock frequency (only for SPI) Optional properties: - - interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW + - interrupts : interrupt mapping for IRQ - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt input, set to "INT2" if INT2 pin should be used instead @@ -20,7 +20,7 @@ bmi160@68 { reg = <0x68>; interrupt-parent = <&gpio4>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; interrupt-names = "INT1"; };