From: Andrew Lunn Date: Tue, 11 Sep 2018 23:53:12 +0000 (+0200) Subject: net: bcmgenet: Fix speed selection for reverse MII X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=00eb2243b933a496958f4ce1bcf59840fea8be16;p=openwrt%2Fstaging%2Fblogic.git net: bcmgenet: Fix speed selection for reverse MII The phy supported speed is being used to determine if the MAC should be configured to 100 or 1G. The masking logic is broken. Instead, look at 1G supported speeds to enable 1G MAC support. Signed-off-by: Andrew Lunn Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index b11d58f1bf45..b756fc79424e 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -226,11 +226,10 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) * capabilities, use that knowledge to also configure the * Reverse MII interface correctly. */ - if ((dev->phydev->supported & PHY_BASIC_FEATURES) == - PHY_BASIC_FEATURES) - port_ctrl = PORT_MODE_EXT_RVMII_25; - else + if (dev->phydev->supported & PHY_1000BT_FEATURES) port_ctrl = PORT_MODE_EXT_RVMII_50; + else + port_ctrl = PORT_MODE_EXT_RVMII_25; bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL); break;