From: Sascha Hauer Date: Wed, 15 Apr 2009 01:32:23 +0000 (+0000) Subject: fec: switch to net_device_ops X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=009fda83ee2f38e5deb9d62fc54a904a92645fe4;p=openwrt%2Fstaging%2Fblogic.git fec: switch to net_device_ops Signed-off-by: Sascha Hauer Signed-off-by: David S. Miller --- diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 7b3e331dd442..54ee493768f1 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -210,17 +210,13 @@ struct fec_enet_private { int full_duplex; }; -static int fec_enet_open(struct net_device *dev); -static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); static void fec_enet_mii(struct net_device *dev); static irqreturn_t fec_enet_interrupt(int irq, void * dev_id); static void fec_enet_tx(struct net_device *dev); static void fec_enet_rx(struct net_device *dev); static int fec_enet_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); static void fec_restart(struct net_device *dev, int duplex); static void fec_stop(struct net_device *dev); -static void fec_set_mac_address(struct net_device *dev); /* MII processing. We keep this as simple as possible. Requests are @@ -1410,7 +1406,6 @@ fec_enet_open(struct net_device *dev) /* I should reset the ring buffers here, but I don't yet know * a simple way to do that. */ - fec_set_mac_address(dev); fep->sequence_done = 0; fep->link = 0; @@ -1543,19 +1538,35 @@ static void set_multicast_list(struct net_device *dev) } /* Set a MAC change in hardware. */ -static void -fec_set_mac_address(struct net_device *dev) +static int +fec_set_mac_address(struct net_device *dev, void *p) { struct fec_enet_private *fep = netdev_priv(dev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - /* Set station address. */ writel(dev->dev_addr[3] | (dev->dev_addr[2] << 8) | (dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24), fep->hwp + FEC_ADDR_LOW); writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24), fep + FEC_ADDR_HIGH); + return 0; } +static const struct net_device_ops fec_netdev_ops = { + .ndo_open = fec_enet_open, + .ndo_stop = fec_enet_close, + .ndo_start_xmit = fec_enet_start_xmit, + .ndo_set_multicast_list = set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_tx_timeout = fec_timeout, + .ndo_set_mac_address = fec_set_mac_address, +}; + /* * XXX: We need to clean up on failure exits here. * @@ -1651,12 +1662,8 @@ int __init fec_enet_init(struct net_device *dev, int index) fec_request_mii_intr(dev); #endif /* The FEC Ethernet specific entries in the device structure */ - dev->open = fec_enet_open; - dev->hard_start_xmit = fec_enet_start_xmit; - dev->tx_timeout = fec_timeout; dev->watchdog_timeo = TX_TIMEOUT; - dev->stop = fec_enet_close; - dev->set_multicast_list = set_multicast_list; + dev->netdev_ops = &fec_netdev_ops; for (i=0; ihwp + FEC_IEVENT); - /* Set station address. */ - fec_set_mac_address(dev); - /* Reset all multicast. */ writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);