From: Felix Fietkau Date: Sat, 21 May 2016 16:07:12 +0000 (+0200) Subject: mvebu: rename recently added flash driver fix X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=008579f2fff07e97f503d321dd66098d823b4237;p=openwrt%2Fstaging%2Fblocktrron.git mvebu: rename recently added flash driver fix Signed-off-by: Felix Fietkau --- diff --git a/target/linux/mvebu/patches-4.4/010-mtd-nand-pxa3xx_nand-add-support-for-partial-chunks.patch b/target/linux/mvebu/patches-4.4/010-mtd-nand-pxa3xx_nand-add-support-for-partial-chunks.patch deleted file mode 100644 index 2e6709781f..0000000000 --- a/target/linux/mvebu/patches-4.4/010-mtd-nand-pxa3xx_nand-add-support-for-partial-chunks.patch +++ /dev/null @@ -1,428 +0,0 @@ -From: Thomas Petazzoni -Date: Wed, 10 Feb 2016 14:54:21 +0100 -Subject: [PATCH] mtd: nand: pxa3xx_nand: add support for partial chunks - -This commit is needed to properly support the 8-bits ECC configuration -with 4KB pages. - -When pages larger than 2 KB are used on platforms using the PXA3xx -NAND controller, the reading/programming operations need to be split -in chunks of 2 KBs or less because the controller FIFO is limited to -about 2 KB (i.e a bit more than 2 KB to accommodate OOB data). Due to -this requirement, the data layout on NAND is a bit strange, with ECC -interleaved with data, at the end of each chunk. - -When a 4-bits ECC configuration is used with 4 KB pages, the physical -data layout on the NAND looks like this: - -| 2048 data | 32 spare | 30 ECC | 2048 data | 32 spare | 30 ECC | - -So the data chunks have an equal size, 2080 bytes for each chunk, -which the driver supports properly. - -When a 8-bits ECC configuration is used with 4KB pages, the physical -data layout on the NAND looks like this: - -| 1024 data | 30 ECC | 1024 data | 30 ECC | 1024 data | 30 ECC | 1024 data | 30 ECC | 64 spare | 30 ECC | - -So, the spare area is stored in its own chunk, which has a different -size than the other chunks. Since OOB is not used by UBIFS, the initial -implementation of the driver has chosen to not support reading this -additional "spare" chunk of data. - -Unfortunately, Marvell has chosen to store the BBT signature in the -OOB area. Therefore, if the driver doesn't read this spare area, Linux -has no way of finding the BBT. It thinks there is no BBT, and rewrites -one, which U-Boot does not recognize, causing compatibility problems -between the bootloader and the kernel in terms of NAND usage. - -To fix this, this commit implements the support for reading a partial -last chunk. This support is currently only useful for the case of 8 -bits ECC with 4 KB pages, but it will be useful in the future to -enable other configurations such as 12 bits and 16 bits ECC with 4 KB -pages, or 8 bits ECC with 8 KB pages, etc. All those configurations -have a "last" chunk that doesn't have the same size as the other -chunks. - -In order to implement reading of the last chunk, this commit: - - - Adds a number of new fields to the pxa3xx_nand_info to describe how - many full chunks and how many chunks we have, the size of full - chunks and partial chunks, both in terms of data area and spare - area. - - - Fills in the step_chunk_size and step_spare_size variables to - describe how much data and spare should be read/written for the - current read/program step. - - - Reworks the state machine to accommodate doing the additional read - or program step when a last partial chunk is used. - -This commit has been tested on a Marvell Armada 398 DB board, with a -4KB page NAND, tested in both 4 bits ECC and 8 bits ECC -configurations. Robert Jarzmik has tested on some PXA platforms. - -Signed-off-by: Thomas Petazzoni -Tested-by: Robert Jarzmik -Acked-by: Ezequiel Garcia -Signed-off-by: Brian Norris ---- - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -228,15 +228,44 @@ struct pxa3xx_nand_info { - int use_spare; /* use spare ? */ - int need_wait; - -- unsigned int data_size; /* data to be read from FIFO */ -- unsigned int chunk_size; /* split commands chunk size */ -- unsigned int oob_size; -+ /* Amount of real data per full chunk */ -+ unsigned int chunk_size; -+ -+ /* Amount of spare data per full chunk */ - unsigned int spare_size; -+ -+ /* Number of full chunks (i.e chunk_size + spare_size) */ -+ unsigned int nfullchunks; -+ -+ /* -+ * Total number of chunks. If equal to nfullchunks, then there -+ * are only full chunks. Otherwise, there is one last chunk of -+ * size (last_chunk_size + last_spare_size) -+ */ -+ unsigned int ntotalchunks; -+ -+ /* Amount of real data in the last chunk */ -+ unsigned int last_chunk_size; -+ -+ /* Amount of spare data in the last chunk */ -+ unsigned int last_spare_size; -+ - unsigned int ecc_size; - unsigned int ecc_err_cnt; - unsigned int max_bitflips; - int retcode; - -+ /* -+ * Variables only valid during command -+ * execution. step_chunk_size and step_spare_size is the -+ * amount of real data and spare data in the current -+ * chunk. cur_chunk is the current chunk being -+ * read/programmed. -+ */ -+ unsigned int step_chunk_size; -+ unsigned int step_spare_size; -+ unsigned int cur_chunk; -+ - /* cached register value */ - uint32_t reg_ndcr; - uint32_t ndtr0cs0; -@@ -531,25 +560,6 @@ static int pxa3xx_nand_init(struct pxa3x - return 0; - } - --/* -- * Set the data and OOB size, depending on the selected -- * spare and ECC configuration. -- * Only applicable to READ0, READOOB and PAGEPROG commands. -- */ --static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info, -- struct mtd_info *mtd) --{ -- int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; -- -- info->data_size = mtd->writesize; -- if (!oob_enable) -- return; -- -- info->oob_size = info->spare_size; -- if (!info->use_ecc) -- info->oob_size += info->ecc_size; --} -- - /** - * NOTE: it is a must to set ND_RUN firstly, then write - * command buffer, otherwise, it does not work. -@@ -665,28 +675,28 @@ static void drain_fifo(struct pxa3xx_nan - - static void handle_data_pio(struct pxa3xx_nand_info *info) - { -- unsigned int do_bytes = min(info->data_size, info->chunk_size); -- - switch (info->state) { - case STATE_PIO_WRITING: -- writesl(info->mmio_base + NDDB, -- info->data_buff + info->data_buff_pos, -- DIV_ROUND_UP(do_bytes, 4)); -+ if (info->step_chunk_size) -+ writesl(info->mmio_base + NDDB, -+ info->data_buff + info->data_buff_pos, -+ DIV_ROUND_UP(info->step_chunk_size, 4)); - -- if (info->oob_size > 0) -+ if (info->step_spare_size) - writesl(info->mmio_base + NDDB, - info->oob_buff + info->oob_buff_pos, -- DIV_ROUND_UP(info->oob_size, 4)); -+ DIV_ROUND_UP(info->step_spare_size, 4)); - break; - case STATE_PIO_READING: -- drain_fifo(info, -- info->data_buff + info->data_buff_pos, -- DIV_ROUND_UP(do_bytes, 4)); -+ if (info->step_chunk_size) -+ drain_fifo(info, -+ info->data_buff + info->data_buff_pos, -+ DIV_ROUND_UP(info->step_chunk_size, 4)); - -- if (info->oob_size > 0) -+ if (info->step_spare_size) - drain_fifo(info, - info->oob_buff + info->oob_buff_pos, -- DIV_ROUND_UP(info->oob_size, 4)); -+ DIV_ROUND_UP(info->step_spare_size, 4)); - break; - default: - dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__, -@@ -695,9 +705,8 @@ static void handle_data_pio(struct pxa3x - } - - /* Update buffer pointers for multi-page read/write */ -- info->data_buff_pos += do_bytes; -- info->oob_buff_pos += info->oob_size; -- info->data_size -= do_bytes; -+ info->data_buff_pos += info->step_chunk_size; -+ info->oob_buff_pos += info->step_spare_size; - } - - static void pxa3xx_nand_data_dma_irq(void *data) -@@ -738,8 +747,9 @@ static void start_data_dma(struct pxa3xx - info->state); - BUG(); - } -- info->sg.length = info->data_size + -- (info->oob_size ? info->spare_size + info->ecc_size : 0); -+ info->sg.length = info->chunk_size; -+ if (info->use_spare) -+ info->sg.length += info->spare_size + info->ecc_size; - dma_map_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir); - - tx = dmaengine_prep_slave_sg(info->dma_chan, &info->sg, 1, direction, -@@ -900,9 +910,11 @@ static void prepare_start_command(struct - /* reset data and oob column point to handle data */ - info->buf_start = 0; - info->buf_count = 0; -- info->oob_size = 0; - info->data_buff_pos = 0; - info->oob_buff_pos = 0; -+ info->step_chunk_size = 0; -+ info->step_spare_size = 0; -+ info->cur_chunk = 0; - info->use_ecc = 0; - info->use_spare = 1; - info->retcode = ERR_NONE; -@@ -914,8 +926,6 @@ static void prepare_start_command(struct - case NAND_CMD_READ0: - case NAND_CMD_PAGEPROG: - info->use_ecc = 1; -- case NAND_CMD_READOOB: -- pxa3xx_set_datasize(info, mtd); - break; - case NAND_CMD_PARAM: - info->use_spare = 0; -@@ -974,6 +984,14 @@ static int prepare_set_command(struct px - if (command == NAND_CMD_READOOB) - info->buf_start += mtd->writesize; - -+ if (info->cur_chunk < info->nfullchunks) { -+ info->step_chunk_size = info->chunk_size; -+ info->step_spare_size = info->spare_size; -+ } else { -+ info->step_chunk_size = info->last_chunk_size; -+ info->step_spare_size = info->last_spare_size; -+ } -+ - /* - * Multiple page read needs an 'extended command type' field, - * which is either naked-read or last-read according to the -@@ -985,8 +1003,8 @@ static int prepare_set_command(struct px - info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8) - | NDCB0_LEN_OVRD - | NDCB0_EXT_CMD_TYPE(ext_cmd_type); -- info->ndcb3 = info->chunk_size + -- info->oob_size; -+ info->ndcb3 = info->step_chunk_size + -+ info->step_spare_size; - } - - set_command_address(info, mtd->writesize, column, page_addr); -@@ -1006,8 +1024,6 @@ static int prepare_set_command(struct px - | NDCB0_EXT_CMD_TYPE(ext_cmd_type) - | addr_cycle - | command; -- /* No data transfer in this case */ -- info->data_size = 0; - exec_cmd = 1; - } - break; -@@ -1019,6 +1035,14 @@ static int prepare_set_command(struct px - break; - } - -+ if (info->cur_chunk < info->nfullchunks) { -+ info->step_chunk_size = info->chunk_size; -+ info->step_spare_size = info->spare_size; -+ } else { -+ info->step_chunk_size = info->last_chunk_size; -+ info->step_spare_size = info->last_spare_size; -+ } -+ - /* Second command setting for large pages */ - if (mtd->writesize > PAGE_CHUNK_SIZE) { - /* -@@ -1029,14 +1053,14 @@ static int prepare_set_command(struct px - info->ndcb0 |= NDCB0_CMD_TYPE(0x1) - | NDCB0_LEN_OVRD - | NDCB0_EXT_CMD_TYPE(ext_cmd_type); -- info->ndcb3 = info->chunk_size + -- info->oob_size; -+ info->ndcb3 = info->step_chunk_size + -+ info->step_spare_size; - - /* - * This is the command dispatch that completes a chunked - * page program operation. - */ -- if (info->data_size == 0) { -+ if (info->cur_chunk == info->ntotalchunks) { - info->ndcb0 = NDCB0_CMD_TYPE(0x1) - | NDCB0_EXT_CMD_TYPE(ext_cmd_type) - | command; -@@ -1063,7 +1087,7 @@ static int prepare_set_command(struct px - | command; - info->ndcb1 = (column & 0xFF); - info->ndcb3 = INIT_BUFFER_SIZE; -- info->data_size = INIT_BUFFER_SIZE; -+ info->step_chunk_size = INIT_BUFFER_SIZE; - break; - - case NAND_CMD_READID: -@@ -1073,7 +1097,7 @@ static int prepare_set_command(struct px - | command; - info->ndcb1 = (column & 0xFF); - -- info->data_size = 8; -+ info->step_chunk_size = 8; - break; - case NAND_CMD_STATUS: - info->buf_count = 1; -@@ -1081,7 +1105,7 @@ static int prepare_set_command(struct px - | NDCB0_ADDR_CYC(1) - | command; - -- info->data_size = 8; -+ info->step_chunk_size = 8; - break; - - case NAND_CMD_ERASE1: -@@ -1220,6 +1244,7 @@ static void nand_cmdfunc_extended(struct - init_completion(&info->dev_ready); - do { - info->state = STATE_PREPARED; -+ - exec_cmd = prepare_set_command(info, command, ext_cmd_type, - column, page_addr); - if (!exec_cmd) { -@@ -1239,22 +1264,30 @@ static void nand_cmdfunc_extended(struct - break; - } - -+ /* Only a few commands need several steps */ -+ if (command != NAND_CMD_PAGEPROG && -+ command != NAND_CMD_READ0 && -+ command != NAND_CMD_READOOB) -+ break; -+ -+ info->cur_chunk++; -+ - /* Check if the sequence is complete */ -- if (info->data_size == 0 && command != NAND_CMD_PAGEPROG) -+ if (info->cur_chunk == info->ntotalchunks && command != NAND_CMD_PAGEPROG) - break; - - /* - * After a splitted program command sequence has issued - * the command dispatch, the command sequence is complete. - */ -- if (info->data_size == 0 && -+ if (info->cur_chunk == (info->ntotalchunks + 1) && - command == NAND_CMD_PAGEPROG && - ext_cmd_type == EXT_CMD_TYPE_DISPATCH) - break; - - if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) { - /* Last read: issue a 'last naked read' */ -- if (info->data_size == info->chunk_size) -+ if (info->cur_chunk == info->ntotalchunks - 1) - ext_cmd_type = EXT_CMD_TYPE_LAST_RW; - else - ext_cmd_type = EXT_CMD_TYPE_NAKED_RW; -@@ -1264,7 +1297,7 @@ static void nand_cmdfunc_extended(struct - * the command dispatch must be issued to complete. - */ - } else if (command == NAND_CMD_PAGEPROG && -- info->data_size == 0) { -+ info->cur_chunk == info->ntotalchunks) { - ext_cmd_type = EXT_CMD_TYPE_DISPATCH; - } - } while (1); -@@ -1514,6 +1547,8 @@ static int pxa_ecc_init(struct pxa3xx_na - int strength, int ecc_stepsize, int page_size) - { - if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) { -+ info->nfullchunks = 1; -+ info->ntotalchunks = 1; - info->chunk_size = 2048; - info->spare_size = 40; - info->ecc_size = 24; -@@ -1522,6 +1557,8 @@ static int pxa_ecc_init(struct pxa3xx_na - ecc->strength = 1; - - } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) { -+ info->nfullchunks = 1; -+ info->ntotalchunks = 1; - info->chunk_size = 512; - info->spare_size = 8; - info->ecc_size = 8; -@@ -1535,6 +1572,8 @@ static int pxa_ecc_init(struct pxa3xx_na - */ - } else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) { - info->ecc_bch = 1; -+ info->nfullchunks = 1; -+ info->ntotalchunks = 1; - info->chunk_size = 2048; - info->spare_size = 32; - info->ecc_size = 32; -@@ -1545,6 +1584,8 @@ static int pxa_ecc_init(struct pxa3xx_na - - } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) { - info->ecc_bch = 1; -+ info->nfullchunks = 2; -+ info->ntotalchunks = 2; - info->chunk_size = 2048; - info->spare_size = 32; - info->ecc_size = 32; -@@ -1559,8 +1600,12 @@ static int pxa_ecc_init(struct pxa3xx_na - */ - } else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) { - info->ecc_bch = 1; -+ info->nfullchunks = 4; -+ info->ntotalchunks = 5; - info->chunk_size = 1024; - info->spare_size = 0; -+ info->last_chunk_size = 0; -+ info->last_spare_size = 64; - info->ecc_size = 32; - ecc->mode = NAND_ECC_HW; - ecc->size = info->chunk_size; diff --git a/target/linux/mvebu/patches-4.4/020-mtd-nand-pxa3xx_nand-add-support-for-partial-chunks.patch b/target/linux/mvebu/patches-4.4/020-mtd-nand-pxa3xx_nand-add-support-for-partial-chunks.patch new file mode 100644 index 0000000000..2e6709781f --- /dev/null +++ b/target/linux/mvebu/patches-4.4/020-mtd-nand-pxa3xx_nand-add-support-for-partial-chunks.patch @@ -0,0 +1,428 @@ +From: Thomas Petazzoni +Date: Wed, 10 Feb 2016 14:54:21 +0100 +Subject: [PATCH] mtd: nand: pxa3xx_nand: add support for partial chunks + +This commit is needed to properly support the 8-bits ECC configuration +with 4KB pages. + +When pages larger than 2 KB are used on platforms using the PXA3xx +NAND controller, the reading/programming operations need to be split +in chunks of 2 KBs or less because the controller FIFO is limited to +about 2 KB (i.e a bit more than 2 KB to accommodate OOB data). Due to +this requirement, the data layout on NAND is a bit strange, with ECC +interleaved with data, at the end of each chunk. + +When a 4-bits ECC configuration is used with 4 KB pages, the physical +data layout on the NAND looks like this: + +| 2048 data | 32 spare | 30 ECC | 2048 data | 32 spare | 30 ECC | + +So the data chunks have an equal size, 2080 bytes for each chunk, +which the driver supports properly. + +When a 8-bits ECC configuration is used with 4KB pages, the physical +data layout on the NAND looks like this: + +| 1024 data | 30 ECC | 1024 data | 30 ECC | 1024 data | 30 ECC | 1024 data | 30 ECC | 64 spare | 30 ECC | + +So, the spare area is stored in its own chunk, which has a different +size than the other chunks. Since OOB is not used by UBIFS, the initial +implementation of the driver has chosen to not support reading this +additional "spare" chunk of data. + +Unfortunately, Marvell has chosen to store the BBT signature in the +OOB area. Therefore, if the driver doesn't read this spare area, Linux +has no way of finding the BBT. It thinks there is no BBT, and rewrites +one, which U-Boot does not recognize, causing compatibility problems +between the bootloader and the kernel in terms of NAND usage. + +To fix this, this commit implements the support for reading a partial +last chunk. This support is currently only useful for the case of 8 +bits ECC with 4 KB pages, but it will be useful in the future to +enable other configurations such as 12 bits and 16 bits ECC with 4 KB +pages, or 8 bits ECC with 8 KB pages, etc. All those configurations +have a "last" chunk that doesn't have the same size as the other +chunks. + +In order to implement reading of the last chunk, this commit: + + - Adds a number of new fields to the pxa3xx_nand_info to describe how + many full chunks and how many chunks we have, the size of full + chunks and partial chunks, both in terms of data area and spare + area. + + - Fills in the step_chunk_size and step_spare_size variables to + describe how much data and spare should be read/written for the + current read/program step. + + - Reworks the state machine to accommodate doing the additional read + or program step when a last partial chunk is used. + +This commit has been tested on a Marvell Armada 398 DB board, with a +4KB page NAND, tested in both 4 bits ECC and 8 bits ECC +configurations. Robert Jarzmik has tested on some PXA platforms. + +Signed-off-by: Thomas Petazzoni +Tested-by: Robert Jarzmik +Acked-by: Ezequiel Garcia +Signed-off-by: Brian Norris +--- + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -228,15 +228,44 @@ struct pxa3xx_nand_info { + int use_spare; /* use spare ? */ + int need_wait; + +- unsigned int data_size; /* data to be read from FIFO */ +- unsigned int chunk_size; /* split commands chunk size */ +- unsigned int oob_size; ++ /* Amount of real data per full chunk */ ++ unsigned int chunk_size; ++ ++ /* Amount of spare data per full chunk */ + unsigned int spare_size; ++ ++ /* Number of full chunks (i.e chunk_size + spare_size) */ ++ unsigned int nfullchunks; ++ ++ /* ++ * Total number of chunks. If equal to nfullchunks, then there ++ * are only full chunks. Otherwise, there is one last chunk of ++ * size (last_chunk_size + last_spare_size) ++ */ ++ unsigned int ntotalchunks; ++ ++ /* Amount of real data in the last chunk */ ++ unsigned int last_chunk_size; ++ ++ /* Amount of spare data in the last chunk */ ++ unsigned int last_spare_size; ++ + unsigned int ecc_size; + unsigned int ecc_err_cnt; + unsigned int max_bitflips; + int retcode; + ++ /* ++ * Variables only valid during command ++ * execution. step_chunk_size and step_spare_size is the ++ * amount of real data and spare data in the current ++ * chunk. cur_chunk is the current chunk being ++ * read/programmed. ++ */ ++ unsigned int step_chunk_size; ++ unsigned int step_spare_size; ++ unsigned int cur_chunk; ++ + /* cached register value */ + uint32_t reg_ndcr; + uint32_t ndtr0cs0; +@@ -531,25 +560,6 @@ static int pxa3xx_nand_init(struct pxa3x + return 0; + } + +-/* +- * Set the data and OOB size, depending on the selected +- * spare and ECC configuration. +- * Only applicable to READ0, READOOB and PAGEPROG commands. +- */ +-static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info, +- struct mtd_info *mtd) +-{ +- int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; +- +- info->data_size = mtd->writesize; +- if (!oob_enable) +- return; +- +- info->oob_size = info->spare_size; +- if (!info->use_ecc) +- info->oob_size += info->ecc_size; +-} +- + /** + * NOTE: it is a must to set ND_RUN firstly, then write + * command buffer, otherwise, it does not work. +@@ -665,28 +675,28 @@ static void drain_fifo(struct pxa3xx_nan + + static void handle_data_pio(struct pxa3xx_nand_info *info) + { +- unsigned int do_bytes = min(info->data_size, info->chunk_size); +- + switch (info->state) { + case STATE_PIO_WRITING: +- writesl(info->mmio_base + NDDB, +- info->data_buff + info->data_buff_pos, +- DIV_ROUND_UP(do_bytes, 4)); ++ if (info->step_chunk_size) ++ writesl(info->mmio_base + NDDB, ++ info->data_buff + info->data_buff_pos, ++ DIV_ROUND_UP(info->step_chunk_size, 4)); + +- if (info->oob_size > 0) ++ if (info->step_spare_size) + writesl(info->mmio_base + NDDB, + info->oob_buff + info->oob_buff_pos, +- DIV_ROUND_UP(info->oob_size, 4)); ++ DIV_ROUND_UP(info->step_spare_size, 4)); + break; + case STATE_PIO_READING: +- drain_fifo(info, +- info->data_buff + info->data_buff_pos, +- DIV_ROUND_UP(do_bytes, 4)); ++ if (info->step_chunk_size) ++ drain_fifo(info, ++ info->data_buff + info->data_buff_pos, ++ DIV_ROUND_UP(info->step_chunk_size, 4)); + +- if (info->oob_size > 0) ++ if (info->step_spare_size) + drain_fifo(info, + info->oob_buff + info->oob_buff_pos, +- DIV_ROUND_UP(info->oob_size, 4)); ++ DIV_ROUND_UP(info->step_spare_size, 4)); + break; + default: + dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__, +@@ -695,9 +705,8 @@ static void handle_data_pio(struct pxa3x + } + + /* Update buffer pointers for multi-page read/write */ +- info->data_buff_pos += do_bytes; +- info->oob_buff_pos += info->oob_size; +- info->data_size -= do_bytes; ++ info->data_buff_pos += info->step_chunk_size; ++ info->oob_buff_pos += info->step_spare_size; + } + + static void pxa3xx_nand_data_dma_irq(void *data) +@@ -738,8 +747,9 @@ static void start_data_dma(struct pxa3xx + info->state); + BUG(); + } +- info->sg.length = info->data_size + +- (info->oob_size ? info->spare_size + info->ecc_size : 0); ++ info->sg.length = info->chunk_size; ++ if (info->use_spare) ++ info->sg.length += info->spare_size + info->ecc_size; + dma_map_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir); + + tx = dmaengine_prep_slave_sg(info->dma_chan, &info->sg, 1, direction, +@@ -900,9 +910,11 @@ static void prepare_start_command(struct + /* reset data and oob column point to handle data */ + info->buf_start = 0; + info->buf_count = 0; +- info->oob_size = 0; + info->data_buff_pos = 0; + info->oob_buff_pos = 0; ++ info->step_chunk_size = 0; ++ info->step_spare_size = 0; ++ info->cur_chunk = 0; + info->use_ecc = 0; + info->use_spare = 1; + info->retcode = ERR_NONE; +@@ -914,8 +926,6 @@ static void prepare_start_command(struct + case NAND_CMD_READ0: + case NAND_CMD_PAGEPROG: + info->use_ecc = 1; +- case NAND_CMD_READOOB: +- pxa3xx_set_datasize(info, mtd); + break; + case NAND_CMD_PARAM: + info->use_spare = 0; +@@ -974,6 +984,14 @@ static int prepare_set_command(struct px + if (command == NAND_CMD_READOOB) + info->buf_start += mtd->writesize; + ++ if (info->cur_chunk < info->nfullchunks) { ++ info->step_chunk_size = info->chunk_size; ++ info->step_spare_size = info->spare_size; ++ } else { ++ info->step_chunk_size = info->last_chunk_size; ++ info->step_spare_size = info->last_spare_size; ++ } ++ + /* + * Multiple page read needs an 'extended command type' field, + * which is either naked-read or last-read according to the +@@ -985,8 +1003,8 @@ static int prepare_set_command(struct px + info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8) + | NDCB0_LEN_OVRD + | NDCB0_EXT_CMD_TYPE(ext_cmd_type); +- info->ndcb3 = info->chunk_size + +- info->oob_size; ++ info->ndcb3 = info->step_chunk_size + ++ info->step_spare_size; + } + + set_command_address(info, mtd->writesize, column, page_addr); +@@ -1006,8 +1024,6 @@ static int prepare_set_command(struct px + | NDCB0_EXT_CMD_TYPE(ext_cmd_type) + | addr_cycle + | command; +- /* No data transfer in this case */ +- info->data_size = 0; + exec_cmd = 1; + } + break; +@@ -1019,6 +1035,14 @@ static int prepare_set_command(struct px + break; + } + ++ if (info->cur_chunk < info->nfullchunks) { ++ info->step_chunk_size = info->chunk_size; ++ info->step_spare_size = info->spare_size; ++ } else { ++ info->step_chunk_size = info->last_chunk_size; ++ info->step_spare_size = info->last_spare_size; ++ } ++ + /* Second command setting for large pages */ + if (mtd->writesize > PAGE_CHUNK_SIZE) { + /* +@@ -1029,14 +1053,14 @@ static int prepare_set_command(struct px + info->ndcb0 |= NDCB0_CMD_TYPE(0x1) + | NDCB0_LEN_OVRD + | NDCB0_EXT_CMD_TYPE(ext_cmd_type); +- info->ndcb3 = info->chunk_size + +- info->oob_size; ++ info->ndcb3 = info->step_chunk_size + ++ info->step_spare_size; + + /* + * This is the command dispatch that completes a chunked + * page program operation. + */ +- if (info->data_size == 0) { ++ if (info->cur_chunk == info->ntotalchunks) { + info->ndcb0 = NDCB0_CMD_TYPE(0x1) + | NDCB0_EXT_CMD_TYPE(ext_cmd_type) + | command; +@@ -1063,7 +1087,7 @@ static int prepare_set_command(struct px + | command; + info->ndcb1 = (column & 0xFF); + info->ndcb3 = INIT_BUFFER_SIZE; +- info->data_size = INIT_BUFFER_SIZE; ++ info->step_chunk_size = INIT_BUFFER_SIZE; + break; + + case NAND_CMD_READID: +@@ -1073,7 +1097,7 @@ static int prepare_set_command(struct px + | command; + info->ndcb1 = (column & 0xFF); + +- info->data_size = 8; ++ info->step_chunk_size = 8; + break; + case NAND_CMD_STATUS: + info->buf_count = 1; +@@ -1081,7 +1105,7 @@ static int prepare_set_command(struct px + | NDCB0_ADDR_CYC(1) + | command; + +- info->data_size = 8; ++ info->step_chunk_size = 8; + break; + + case NAND_CMD_ERASE1: +@@ -1220,6 +1244,7 @@ static void nand_cmdfunc_extended(struct + init_completion(&info->dev_ready); + do { + info->state = STATE_PREPARED; ++ + exec_cmd = prepare_set_command(info, command, ext_cmd_type, + column, page_addr); + if (!exec_cmd) { +@@ -1239,22 +1264,30 @@ static void nand_cmdfunc_extended(struct + break; + } + ++ /* Only a few commands need several steps */ ++ if (command != NAND_CMD_PAGEPROG && ++ command != NAND_CMD_READ0 && ++ command != NAND_CMD_READOOB) ++ break; ++ ++ info->cur_chunk++; ++ + /* Check if the sequence is complete */ +- if (info->data_size == 0 && command != NAND_CMD_PAGEPROG) ++ if (info->cur_chunk == info->ntotalchunks && command != NAND_CMD_PAGEPROG) + break; + + /* + * After a splitted program command sequence has issued + * the command dispatch, the command sequence is complete. + */ +- if (info->data_size == 0 && ++ if (info->cur_chunk == (info->ntotalchunks + 1) && + command == NAND_CMD_PAGEPROG && + ext_cmd_type == EXT_CMD_TYPE_DISPATCH) + break; + + if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) { + /* Last read: issue a 'last naked read' */ +- if (info->data_size == info->chunk_size) ++ if (info->cur_chunk == info->ntotalchunks - 1) + ext_cmd_type = EXT_CMD_TYPE_LAST_RW; + else + ext_cmd_type = EXT_CMD_TYPE_NAKED_RW; +@@ -1264,7 +1297,7 @@ static void nand_cmdfunc_extended(struct + * the command dispatch must be issued to complete. + */ + } else if (command == NAND_CMD_PAGEPROG && +- info->data_size == 0) { ++ info->cur_chunk == info->ntotalchunks) { + ext_cmd_type = EXT_CMD_TYPE_DISPATCH; + } + } while (1); +@@ -1514,6 +1547,8 @@ static int pxa_ecc_init(struct pxa3xx_na + int strength, int ecc_stepsize, int page_size) + { + if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) { ++ info->nfullchunks = 1; ++ info->ntotalchunks = 1; + info->chunk_size = 2048; + info->spare_size = 40; + info->ecc_size = 24; +@@ -1522,6 +1557,8 @@ static int pxa_ecc_init(struct pxa3xx_na + ecc->strength = 1; + + } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) { ++ info->nfullchunks = 1; ++ info->ntotalchunks = 1; + info->chunk_size = 512; + info->spare_size = 8; + info->ecc_size = 8; +@@ -1535,6 +1572,8 @@ static int pxa_ecc_init(struct pxa3xx_na + */ + } else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) { + info->ecc_bch = 1; ++ info->nfullchunks = 1; ++ info->ntotalchunks = 1; + info->chunk_size = 2048; + info->spare_size = 32; + info->ecc_size = 32; +@@ -1545,6 +1584,8 @@ static int pxa_ecc_init(struct pxa3xx_na + + } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) { + info->ecc_bch = 1; ++ info->nfullchunks = 2; ++ info->ntotalchunks = 2; + info->chunk_size = 2048; + info->spare_size = 32; + info->ecc_size = 32; +@@ -1559,8 +1600,12 @@ static int pxa_ecc_init(struct pxa3xx_na + */ + } else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) { + info->ecc_bch = 1; ++ info->nfullchunks = 4; ++ info->ntotalchunks = 5; + info->chunk_size = 1024; + info->spare_size = 0; ++ info->last_chunk_size = 0; ++ info->last_spare_size = 64; + info->ecc_size = 32; + ecc->mode = NAND_ECC_HW; + ecc->size = info->chunk_size;