From: Wojciech Dubowik Date: Wed, 14 Sep 2022 10:12:06 +0000 (+0200) Subject: mpc85xx: Copy over kernel 5.10 patches and config to 5.15 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=00643b4584e73949de05ca8c3276a05657ba0d45;p=openwrt%2Fstaging%2F981213.git mpc85xx: Copy over kernel 5.10 patches and config to 5.15 Split patches for better change visibility. Signed-off-by: Wojciech Dubowik Signed-off-by: Petr Štetiar [un-dmarc, commit description] --- diff --git a/target/linux/mpc85xx/config-5.15 b/target/linux/mpc85xx/config-5.15 new file mode 100644 index 0000000000..532d176c15 --- /dev/null +++ b/target/linux/mpc85xx/config-5.15 @@ -0,0 +1,276 @@ +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_ADVANCED_OPTIONS is not set +CONFIG_AR8216_PHY=y +CONFIG_AR8216_PHY_LEDS=y +CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_MMAP_RND_BITS=11 +CONFIG_ARCH_MMAP_RND_BITS_MAX=17 +CONFIG_ARCH_MMAP_RND_BITS_MIN=11 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y +CONFIG_ASN1=y +CONFIG_AUDIT_ARCH=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BOOKE=y +CONFIG_BOOKE_WDT=y +# CONFIG_BSC9131_RDB is not set +# CONFIG_BSC9132_QDS is not set +# CONFIG_C293_PCIE is not set +CONFIG_CLONE_BACKWARDS=y +CONFIG_CLZ_TAB=y +CONFIG_CMDLINE="console=ttyS0,115200" +CONFIG_CMDLINE_FROM_BOOTLOADER=y +# CONFIG_CMDLINE_OVERRIDE is not set +# CONFIG_COMMON_CLK is not set +CONFIG_COMPAT_32BIT_TIME=y +# CONFIG_CORENET_GENERIC is not set +# CONFIG_CPM2 is not set +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CRYPTO_AES_PPC_SPE is not set +CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_BLAKE2S=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y +CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 +# CONFIG_CRYPTO_MD5_PPC is not set +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RSA=y +# CONFIG_CRYPTO_SHA1_PPC is not set +# CONFIG_CRYPTO_SHA1_PPC_SPE is not set +# CONFIG_CRYPTO_SHA256_PPC_SPE is not set +CONFIG_DATA_SHIFT=12 +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DNOTIFY=y +CONFIG_DTC=y +# CONFIG_E200 is not set +CONFIG_E500=y +# CONFIG_E5500_CPU is not set +# CONFIG_E6500_CPU is not set +CONFIG_EARLY_PRINTK=y +CONFIG_EDAC=y +CONFIG_EDAC_ATOMIC_SCRUB=y +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_LEGACY_SYSFS=y +CONFIG_EDAC_MPC85XX=y +CONFIG_EDAC_SUPPORT=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_FIXED_PHY=y +CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y +# CONFIG_FSL_FMAN is not set +CONFIG_FSL_LBC=y +CONFIG_FSL_PCI=y +CONFIG_FSL_PQ_MDIO=y +CONFIG_FSL_SOC=y +CONFIG_FSL_SOC_BOOKE=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_CPU=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GEN_RTC=y +# CONFIG_GE_IMP3A is not set +CONFIG_GIANFAR=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_MPC8XXX=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HIVEAP_330 is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_XIPHERA is not set +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_MPC=y +CONFIG_ILLEGAL_POINTER_VALUE=0 +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_ISA_DMA_API=y +CONFIG_KERNEL_START=0xc0000000 +# CONFIG_KSI8560 is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOWMEM_CAM_NUM=3 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LXT_PHY=y +# CONFIG_MATH_EMULATION is not set +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MEMFD_CREATE=y +# CONFIG_MFD_ROHM_BD71828 is not set +CONFIG_MIGRATION=y +CONFIG_MMU_GATHER_PAGE_SIZE=y +CONFIG_MODULES_USE_ELF_RELA=y +# CONFIG_MPC8536_DS is not set +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_MPC85xx_CDS is not set +# CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC85xx_RDB is not set +CONFIG_MPIC=y +# CONFIG_MPIC_MSGR is not set +CONFIG_MPIC_TIMER=y +CONFIG_MPILIB=y +# CONFIG_MTD_CFI is not set +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_SPI_NOR=y +# CONFIG_MVME2500 is not set +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NLS=y +CONFIG_NR_IRQS=512 +CONFIG_NVMEM=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_DMA_DEFAULT_COHERENT=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND=y +# CONFIG_P1010_RDB is not set +# CONFIG_P1022_DS is not set +# CONFIG_P1022_RDK is not set +# CONFIG_P1023_RDB is not set +CONFIG_PAGE_OFFSET=0xc0000000 +# CONFIG_PANDA is not set +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEASPM=y +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_PERFORMANCE is not set +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PHYSICAL_ALIGN=0x04000000 +CONFIG_PHYSICAL_START=0x00000000 +# CONFIG_PHYS_64BIT is not set +# CONFIG_PMU_SYSFS is not set +# CONFIG_PPA8548 is not set +CONFIG_PPC=y +CONFIG_PPC32=y +# CONFIG_PPC64 is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_8xx is not set +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_BARRIER_NOSPEC=y +CONFIG_PPC_BOOK3E_MMU=y +# CONFIG_PPC_BOOK3S_6xx is not set +CONFIG_PPC_DOORBELL=y +# CONFIG_PPC_E500MC is not set +# CONFIG_PPC_EARLY_DEBUG is not set +CONFIG_PPC_FSL_BOOK3E=y +CONFIG_PPC_INDIRECT_PCI=y +# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y +CONFIG_PPC_PAGE_SHIFT=12 +# CONFIG_PPC_PTDUMP is not set +# CONFIG_PPC_QEMU_E500 is not set +CONFIG_PPC_SMP_MUXED_IPI=y +CONFIG_PPC_UDBG_16550=y +CONFIG_PPC_WERROR=y +CONFIG_QE_GPIO=y +CONFIG_QUICC_ENGINE=y +CONFIG_RAS=y +# CONFIG_RED_15W_REV1 is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=y +# CONFIG_RTC_DRV_RV3032 is not set +CONFIG_RTC_I2C_AND_SPI=y +CONFIG_RTC_MC146818_LIB=y +# CONFIG_SBC8548 is not set +# CONFIG_SCOM_DEBUGFS is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_QE is not set +# CONFIG_SOCRATES is not set +CONFIG_SPARSE_IRQ=y +CONFIG_SPE=y +CONFIG_SPE_POSSIBLE=y +CONFIG_SPI=y +CONFIG_SPI_FSL_ESPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +CONFIG_SRCU=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_STX_GP3 is not set +CONFIG_SWCONFIG=y +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_THREAD_SHIFT=13 +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TINY_SRCU=y +# CONFIG_TL_WDR4900_V1 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_TWR_P102x is not set +CONFIG_UCC=y +CONFIG_UCC_FAST=y +CONFIG_UCC_GETH=y +# CONFIG_UGETH_TX_ON_DEMAND is not set +CONFIG_USB_SUPPORT=y +CONFIG_VDSO32=y +# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WS_AP3710I is not set +# CONFIG_WS_AP3825I is not set +# CONFIG_XES_MPC85xx is not set +CONFIG_XZ_DEC_BCJ=y +CONFIG_XZ_DEC_POWERPC=y diff --git a/target/linux/mpc85xx/patches-5.15/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-5.15/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch new file mode 100644 index 0000000000..5e5ab10daf --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch @@ -0,0 +1,10 @@ +--- a/arch/powerpc/platforms/85xx/common.c ++++ b/arch/powerpc/platforms/85xx/common.c +@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx + { .compatible = "fsl,mpc8548-guts", }, + /* Probably unnecessary? */ + { .compatible = "gpio-leds", }, ++ { .compatible = "gpio-keys", }, + /* For all PCI controllers */ + { .compatible = "fsl,mpc8540-pci", }, + { .compatible = "fsl,mpc8548-pcie", }, diff --git a/target/linux/mpc85xx/patches-5.15/100-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-5.15/100-powerpc-85xx-tl-wdr4900-v1-support.patch new file mode 100644 index 0000000000..76fd6af010 --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/100-powerpc-85xx-tl-wdr4900-v1-support.patch @@ -0,0 +1,91 @@ +From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Wed, 20 Feb 2013 08:40:33 +0100 +Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1 + board + +This patch adds support for the TP-Link TL-WDR4900 v1 +concurrent dual-band wireless router. The devices uses +the Freescale P1014 SoC. + +Signed-off-by: Gabor Juhos +Signed-off-by: Pawel Dembicki +--- + arch/powerpc/boot/Makefile | 3 ++- + arch/powerpc/boot/wrapper | 5 +++++ + arch/powerpc/platforms/85xx/Kconfig | 12 ++++++++++++ + arch/powerpc/platforms/85xx/Makefile | 1 + + 4 files changed, 20 insertions(+), 1 deletion(-) + +Index: linux-5.15.67/arch/powerpc/boot/Makefile +=================================================================== +--- linux-5.15.67.orig/arch/powerpc/boot/Makefile ++++ linux-5.15.67/arch/powerpc/boot/Makefile +@@ -162,6 +162,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie + src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S + src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S + src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c ++src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S + + src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c + +@@ -342,7 +343,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm + image-$(CONFIG_TQM8555) += cuImage.tqm8555 + image-$(CONFIG_TQM8560) += cuImage.tqm8560 + image-$(CONFIG_KSI8560) += cuImage.ksi8560 +- ++image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 + # Board ports in arch/powerpc/platform/86xx/Kconfig + image-$(CONFIG_MVME7100) += dtbImage.mvme7100 + +Index: linux-5.15.67/arch/powerpc/boot/wrapper +=================================================================== +--- linux-5.15.67.orig/arch/powerpc/boot/wrapper ++++ linux-5.15.67/arch/powerpc/boot/wrapper +@@ -326,6 +326,11 @@ adder875-redboot) + platformo="$object/fixed-head.o $object/redboot-8xx.o" + binary=y + ;; ++simpleboot-tl-wdr4900-v1) ++ platformo="$object/fixed-head.o $object/simpleboot.o" ++ link_address='0x1000000' ++ binary=y ++ ;; + simpleboot-*) + platformo="$object/fixed-head.o $object/simpleboot.o" + binary=y +Index: linux-5.15.67/arch/powerpc/platforms/85xx/Kconfig +=================================================================== +--- linux-5.15.67.orig/arch/powerpc/platforms/85xx/Kconfig ++++ linux-5.15.67/arch/powerpc/platforms/85xx/Kconfig +@@ -170,6 +170,18 @@ config STX_GP3 + select CPM2 + select DEFAULT_UIMAGE + ++config TL_WDR4900_V1 ++ bool "TP-Link TL-WDR4900 v1" ++ select DEFAULT_UIMAGE ++ select ARCH_REQUIRE_GPIOLIB ++ select GPIO_MPC8XXX ++ select SWIOTLB ++ help ++ This option enables support for the TP-Link TL-WDR4900 v1 board. ++ ++ This board is a Concurrent Dual-Band wireless router with a ++ Freescale P1014 SoC. ++ + config TQM8540 + bool "TQ Components TQM8540" + help +Index: linux-5.15.67/arch/powerpc/platforms/85xx/Makefile +=================================================================== +--- linux-5.15.67.orig/arch/powerpc/platforms/85xx/Makefile ++++ linux-5.15.67/arch/powerpc/platforms/85xx/Makefile +@@ -27,6 +27,7 @@ obj-$(CONFIG_TWR_P102x) += twr_p102x.o + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o + obj-$(CONFIG_STX_GP3) += stx_gp3.o ++obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o + obj-$(CONFIG_TQM85xx) += tqm85xx.o + obj-$(CONFIG_PPA8548) += ppa8548.o + obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o diff --git a/target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch new file mode 100644 index 0000000000..da95cd2716 --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch @@ -0,0 +1,30 @@ +--- a/arch/powerpc/platforms/85xx/Kconfig ++++ b/arch/powerpc/platforms/85xx/Kconfig +@@ -49,6 +49,17 @@ config BSC9132_QDS + and dual StarCore SC3850 DSP cores. + Manufacturer : Freescale Semiconductor, Inc + ++config HIVEAP_330 ++ bool "Aerohive HiveAP-330" ++ select DEFAULT_UIMAGE ++ select ARCH_REQUIRE_GPIOLIB ++ select GPIO_MPC8XXX ++ help ++ This option enables support for the Aerohive HiveAP-330 board. ++ ++ This board is a Concurrent Dual-Band wireless access point with a ++ Freescale P1020 SoC. ++ + config MPC8540_ADS + bool "Freescale MPC8540 ADS" + select DEFAULT_UIMAGE +--- a/arch/powerpc/platforms/85xx/Makefile ++++ b/arch/powerpc/platforms/85xx/Makefile +@@ -12,6 +12,7 @@ obj-y += common.o + obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o + obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o + obj-$(CONFIG_C293_PCIE) += c293pcie.o ++obj-$(CONFIG_HIVEAP_330) += hiveap-330.o + obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o + obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o + obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/target/linux/mpc85xx/patches-5.15/102-powerpc-add-cmdline-override.patch b/target/linux/mpc85xx/patches-5.15/102-powerpc-add-cmdline-override.patch new file mode 100644 index 0000000000..c8803d8428 --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/102-powerpc-add-cmdline-override.patch @@ -0,0 +1,41 @@ +Index: linux-5.15.67/arch/powerpc/Kconfig +=================================================================== +--- linux-5.15.67.orig/arch/powerpc/Kconfig ++++ linux-5.15.67/arch/powerpc/Kconfig +@@ -915,6 +915,14 @@ config CMDLINE_FORCE + + endchoice + ++config CMDLINE_OVERRIDE ++ bool "Use alternative cmdline from device tree" ++ help ++ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can ++ be used, this is not a good option for kernels that are shared across ++ devices. This setting enables using "chosen/cmdline-override" as the ++ cmdline if it exists in the device tree. ++ + config EXTRA_TARGETS + string "Additional default image types" + help +Index: linux-5.15.67/drivers/of/fdt.c +=================================================================== +--- linux-5.15.67.orig/drivers/of/fdt.c ++++ linux-5.15.67/drivers/of/fdt.c +@@ -1162,6 +1162,17 @@ int __init early_init_dt_scan_chosen(uns + if (p != NULL && l > 0) + strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE)); + ++ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different ++ * device tree option of chosen/bootargs-override. This is ++ * helpful on boards where u-boot sets bootargs, and is unable ++ * to be modified. ++ */ ++#ifdef CONFIG_CMDLINE_OVERRIDE ++ p = of_get_flat_dt_prop(node, "bootargs-override", &l); ++ if (p != NULL && l > 0) ++ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); ++#endif ++ + /* + * CONFIG_CMDLINE is meant to be a default in case nothing else + * managed to set the command line, unless CONFIG_CMDLINE_FORCE diff --git a/target/linux/mpc85xx/patches-5.15/103-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-5.15/103-powerpc-85xx-red-15w-rev1.patch new file mode 100644 index 0000000000..574d16d96c --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/103-powerpc-85xx-red-15w-rev1.patch @@ -0,0 +1,33 @@ +Index: linux-5.15.67/arch/powerpc/platforms/85xx/Kconfig +=================================================================== +--- linux-5.15.67.orig/arch/powerpc/platforms/85xx/Kconfig ++++ linux-5.15.67/arch/powerpc/platforms/85xx/Kconfig +@@ -173,6 +173,16 @@ config XES_MPC85xx + Manufacturer: Extreme Engineering Solutions, Inc. + URL: + ++config RED_15W_REV1 ++ bool "Sophos RED 15w Rev.1" ++ select DEFAULT_UIMAGE ++ select ARCH_REQUIRE_GPIOLIB ++ select GPIO_MPC8XXX ++ help ++ This option enables support for the Sophos RED 15w Rev.1 board. ++ ++ This board is a wireless VPN router with a Freescale P1010 SoC. ++ + config STX_GP3 + bool "Silicon Turnkey Express GP3" + help +Index: linux-5.15.67/arch/powerpc/platforms/85xx/Makefile +=================================================================== +--- linux-5.15.67.orig/arch/powerpc/platforms/85xx/Makefile ++++ linux-5.15.67/arch/powerpc/platforms/85xx/Makefile +@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o + obj-$(CONFIG_TWR_P102x) += twr_p102x.o + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o ++obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o + obj-$(CONFIG_STX_GP3) += stx_gp3.o + obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o + obj-$(CONFIG_TQM85xx) += tqm85xx.o diff --git a/target/linux/mpc85xx/patches-5.15/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch b/target/linux/mpc85xx/patches-5.15/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch new file mode 100644 index 0000000000..94ed26c3df --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch @@ -0,0 +1,170 @@ +From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001 +From: Pawel Dembicki +Date: Sun, 30 Dec 2018 23:24:41 +0100 +Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT + +This patch apply chages for OpenWRT in P2020RDB +dts file. + +Signed-off-by: Pawel Dembicki +--- + arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++--------- + 1 file changed, 63 insertions(+), 35 deletions(-) + +--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts ++++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts +@@ -5,10 +5,15 @@ + * Copyright 2009-2012 Freescale Semiconductor Inc. + */ + ++/dts-v1/; ++ + /include/ "p2020si-pre.dtsi" + ++#include ++#include ++ + / { +- model = "fsl,P2020RDB"; ++ model = "Freescale P2020RDB"; + compatible = "fsl,P2020RDB"; + + aliases { +@@ -34,48 +39,38 @@ + 0x2 0x0 0x0 0xffb00000 0x00020000>; + + nor@0,0 { +- #address-cells = <1>; +- #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + +- partition@0 { +- /* This location must not be altered */ +- /* 256KB for Vitesse 7385 Switch firmware */ +- reg = <0x0 0x00040000>; +- label = "NOR (RO) Vitesse-7385 Firmware"; +- read-only; +- }; +- +- partition@40000 { +- /* 256KB for DTB Image */ +- reg = <0x00040000 0x00040000>; +- label = "NOR (RO) DTB Image"; +- read-only; +- }; ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; + +- partition@80000 { +- /* 3.5 MB for Linux Kernel Image */ +- reg = <0x00080000 0x00380000>; +- label = "NOR (RO) Linux Kernel Image"; +- read-only; +- }; ++ partition@0 { ++ /* This location must not be altered */ ++ /* 256KB for Vitesse 7385 Switch firmware */ ++ reg = <0x0 0x00040000>; ++ label = "NOR (RO) Vitesse-7385 Firmware"; ++ read-only; ++ }; + +- partition@400000 { +- /* 11MB for JFFS2 based Root file System */ +- reg = <0x00400000 0x00b00000>; +- label = "NOR (RW) JFFS2 Root File System"; +- }; ++ partition@40000 { ++ compatible = "denx,fit"; ++ reg = <0x00040000 0x00ec0000>; ++ label = "firmware"; ++ }; + +- partition@f00000 { +- /* This location must not be altered */ +- /* 512KB for u-boot Bootloader Image */ +- /* 512KB for u-boot Environment Variables */ +- reg = <0x00f00000 0x00100000>; +- label = "NOR (RO) U-Boot Image"; +- read-only; ++ partition@f00000 { ++ /* This location must not be altered */ ++ /* 512KB for u-boot Bootloader Image */ ++ /* 512KB for u-boot Environment Variables */ ++ reg = <0x00f00000 0x00100000>; ++ label = "u-boot"; ++ read-only; ++ }; + }; + }; + +@@ -85,6 +80,7 @@ + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; ++ nand-ecc-mode = "none"; + + partition@0 { + /* This location must not be altered */ +@@ -140,13 +136,43 @@ + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + ++ gpio0: gpio-controller@fc00 { ++ }; ++ + i2c@3000 { ++ temperature-sensor@4c { ++ compatible = "adi,adt7461"; ++ reg = <0x4c>; ++ }; ++ ++ eeprom@50 { ++ compatible = "atmel,24c256"; ++ reg = <0x50>; ++ }; ++ + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + ++ i2c@3100 { ++ pmic@11 { ++ compatible = "zl2006"; ++ reg = <0x11>; ++ }; ++ ++ gpio@18 { ++ compatible = "nxp,pca9557"; ++ reg = <0x18>; ++ }; ++ ++ eeprom@52 { ++ compatible = "atmel,24c01"; ++ reg = <0x52>; ++ }; ++ }; ++ + spi@7000 { + flash@0 { + #address-cells = <1>; +@@ -200,10 +226,12 @@ + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; ++ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + phy1: ethernet-phy@1 { + interrupts = <3 1 0 0>; + reg = <0x1>; ++ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + tbi-phy@2 { + device_type = "tbi-phy"; diff --git a/target/linux/mpc85xx/patches-5.15/105-powerpc-85xx-panda-support.patch b/target/linux/mpc85xx/patches-5.15/105-powerpc-85xx-panda-support.patch new file mode 100644 index 0000000000..4913c614a8 --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/105-powerpc-85xx-panda-support.patch @@ -0,0 +1,30 @@ +--- a/arch/powerpc/platforms/85xx/Kconfig ++++ b/arch/powerpc/platforms/85xx/Kconfig +@@ -60,6 +60,17 @@ config HIVEAP_330 + This board is a Concurrent Dual-Band wireless access point with a + Freescale P1020 SoC. + ++config PANDA ++ bool "OCEDO PANDA" ++ select DEFAULT_UIMAGE ++ select ARCH_REQUIRE_GPIOLIB ++ select GPIO_MPC8XXX ++ help ++ This option enables support for the OCEDO PANDA board. ++ ++ This board is a Concurrent Dual-Band wireless access point with a ++ Freescale P1020 SoC. ++ + config MPC8540_ADS + bool "Freescale MPC8540 ADS" + select DEFAULT_UIMAGE +--- a/arch/powerpc/platforms/85xx/Makefile ++++ b/arch/powerpc/platforms/85xx/Makefile +@@ -24,6 +24,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o + obj-$(CONFIG_P1022_DS) += p1022_ds.o + obj-$(CONFIG_P1022_RDK) += p1022_rdk.o + obj-$(CONFIG_P1023_RDB) += p1023_rdb.o ++obj-$(CONFIG_PANDA) += panda.o + obj-$(CONFIG_TWR_P102x) += twr_p102x.o + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o diff --git a/target/linux/mpc85xx/patches-5.15/106-powerpc-85xx-ws-ap3710i-support.patch b/target/linux/mpc85xx/patches-5.15/106-powerpc-85xx-ws-ap3710i-support.patch new file mode 100644 index 0000000000..124376ffd9 --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/106-powerpc-85xx-ws-ap3710i-support.patch @@ -0,0 +1,30 @@ +--- a/arch/powerpc/platforms/85xx/Kconfig ++++ b/arch/powerpc/platforms/85xx/Kconfig +@@ -71,6 +71,17 @@ config PANDA + This board is a Concurrent Dual-Band wireless access point with a + Freescale P1020 SoC. + ++config WS_AP3710I ++ bool "Enterasys WS-AP3710i" ++ select DEFAULT_UIMAGE ++ select ARCH_REQUIRE_GPIOLIB ++ select GPIO_MPC8XXX ++ help ++ This option enables support for the Enterasys WS-AP3710i board. ++ ++ This board is a Concurrent Dual-Band wireless access point with a ++ Freescale P1020 SoC. ++ + config MPC8540_ADS + bool "Freescale MPC8540 ADS" + select DEFAULT_UIMAGE +--- a/arch/powerpc/platforms/85xx/Makefile ++++ b/arch/powerpc/platforms/85xx/Makefile +@@ -26,6 +26,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o + obj-$(CONFIG_P1023_RDB) += p1023_rdb.o + obj-$(CONFIG_PANDA) += panda.o + obj-$(CONFIG_TWR_P102x) += twr_p102x.o ++obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o + obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o diff --git a/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch b/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch new file mode 100644 index 0000000000..1829a78ec4 --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch @@ -0,0 +1,37 @@ +From 2fa1a7983ef30f3c7486f9b07c001bee87d1f6d6 Mon Sep 17 00:00:00 2001 +From: Martin Kennedy +Date: Sat, 1 Jan 2022 11:01:37 -0500 +Subject: [PATCH] PowerPC 85xx: Add WS-AP3825i support + +This patch adds support for building Linux for the Extreme Networks +WS-AP3825i AP. + +--- a/arch/powerpc/platforms/85xx/Kconfig ++++ b/arch/powerpc/platforms/85xx/Kconfig +@@ -82,6 +82,16 @@ config WS_AP3710I + This board is a Concurrent Dual-Band wireless access point with a + Freescale P1020 SoC. + ++config WS_AP3825I ++ bool "Extreme Networks WS-AP3825i" ++ select DEFAULT_UIMAGE ++ select ARCH_REQUIRE_GPIOLIB ++ select GPIO_MPC8XXX ++ help ++ This option enables support for the Extreme Networks WS-AP3825i board. ++ This board is a Concurrent Dual-Band wireless access point with a ++ Freescale P1020 SoC. ++ + config MPC8540_ADS + bool "Freescale MPC8540 ADS" + select DEFAULT_UIMAGE +--- a/arch/powerpc/platforms/85xx/Makefile ++++ b/arch/powerpc/platforms/85xx/Makefile +@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o + obj-$(CONFIG_PANDA) += panda.o + obj-$(CONFIG_TWR_P102x) += twr_p102x.o + obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o ++obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o + obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o diff --git a/target/linux/mpc85xx/patches-5.15/110-gpio-mpc8xxx-Fix-support-for-IRQ_TYPE_LEVEL_LOW-flow.patch b/target/linux/mpc85xx/patches-5.15/110-gpio-mpc8xxx-Fix-support-for-IRQ_TYPE_LEVEL_LOW-flow.patch new file mode 100644 index 0000000000..0592da1763 --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/110-gpio-mpc8xxx-Fix-support-for-IRQ_TYPE_LEVEL_LOW-flow.patch @@ -0,0 +1,39 @@ +From 29af30435022442ec4eccf3166956b8e0b8a2134 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Mon, 5 Sep 2022 23:13:47 +0200 +Subject: [PATCH] gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type + in mpc85xx +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support +mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in +mpc512x via falling edge type. Do same for mpc85xx which support was added +in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio"). + +Fixes probing of lm90 hwmon driver on mpc85xx based board which use level +interrupt. Without it kernel prints error and refuse lm90 to work: + + [ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8) + [ 15.267168] lm90 0-004c: cannot request IRQ 49 + [ 15.272708] lm90: probe of 0-004c failed with error -22 + +Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio") +Signed-off-by: Pali Rohár +--- + drivers/gpio/gpio-mpc8xxx.c | 1 + + 1 file changed, 1 insertion(+) + +Index: linux-5.15.67/drivers/gpio/gpio-mpc8xxx.c +=================================================================== +--- linux-5.15.67.orig/drivers/gpio/gpio-mpc8xxx.c ++++ linux-5.15.67/drivers/gpio/gpio-mpc8xxx.c +@@ -172,6 +172,7 @@ static int mpc8xxx_irq_set_type(struct i + + switch (flow_type) { + case IRQ_TYPE_EDGE_FALLING: ++ case IRQ_TYPE_LEVEL_LOW: + raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR, + gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR) diff --git a/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch b/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch new file mode 100644 index 0000000000..a021db000d --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch @@ -0,0 +1,44 @@ +From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Sat, 29 Feb 2020 14:27:04 +0100 +Subject: [PATCH] powerpc: bootwrapper: disable uImage generation + +Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to +instruct the mkimage to use the xz compression, which isn't +supported. This disables the uImage generation, as OpenWrt +generates individual uImages for each board using it's own +toolchain. + +Signed-off-by: David Bauer +--- + arch/powerpc/boot/Makefile | 9 --------- + 1 file changed, 9 deletions(-) + +Index: linux-5.15.67/arch/powerpc/boot/Makefile +=================================================================== +--- linux-5.15.67.orig/arch/powerpc/boot/Makefile ++++ linux-5.15.67/arch/powerpc/boot/Makefile +@@ -271,7 +271,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp + image-$(CONFIG_PPC_EFIKA) += zImage.chrp + image-$(CONFIG_PPC_PMAC) += zImage.pmac + image-$(CONFIG_PPC_HOLLY) += dtbImage.holly +-image-$(CONFIG_DEFAULT_UIMAGE) += uImage + image-$(CONFIG_EPAPR_BOOT) += zImage.epapr + + # +@@ -403,15 +402,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits + $(obj)/vmlinux.strip: vmlinux + $(STRIP) -s -R .comment $< -o $@ + +-$(obj)/uImage: vmlinux $(wrapperbits) FORCE +- $(call if_changed,wrap,uboot) +- +-$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE +- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) +- +-$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE +- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) +- + $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) +