lantiq: switch experimental kernel top 4.17

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

diff --git a/target/linux/generic/config-4.16 b/target/linux/generic/config-4.16
deleted file mode 100644 (file)
index 148405f..0000000
--- a/target/linux/generic/config-4.16
+++ /dev/null
@@ -1,5644 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_6LOWPAN is not set
-# CONFIG_6LOWPAN_DEBUGFS is not set
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_9P_FS is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_AB8500_CORE is not set
-# CONFIG_ABP060MG is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_ACENIC is not set
-# CONFIG_ACERHDF is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ACPI_ALS is not set
-# CONFIG_ACPI_APEI is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_CONFIGFS is not set
-# CONFIG_ACPI_CUSTOM_METHOD is not set
-# CONFIG_ACPI_EXTLOG is not set
-# CONFIG_ACPI_HED is not set
-# CONFIG_ACPI_NFIT is not set
-# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
-# CONFIG_ACPI_TABLE_UPGRADE is not set
-# CONFIG_ACPI_VIDEO is not set
-# CONFIG_AD2S1200 is not set
-# CONFIG_AD2S1210 is not set
-# CONFIG_AD2S90 is not set
-# CONFIG_AD5064 is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_AD5360 is not set
-# CONFIG_AD5380 is not set
-# CONFIG_AD5421 is not set
-# CONFIG_AD5446 is not set
-# CONFIG_AD5449 is not set
-# CONFIG_AD5504 is not set
-# CONFIG_AD5592R is not set
-# CONFIG_AD5593R is not set
-# CONFIG_AD5624R_SPI is not set
-# CONFIG_AD5686 is not set
-# CONFIG_AD5755 is not set
-# CONFIG_AD5761 is not set
-# CONFIG_AD5764 is not set
-# CONFIG_AD5791 is not set
-# CONFIG_AD5933 is not set
-# CONFIG_AD7150 is not set
-# CONFIG_AD7152 is not set
-# CONFIG_AD7192 is not set
-# CONFIG_AD7266 is not set
-# CONFIG_AD7280 is not set
-# CONFIG_AD7291 is not set
-# CONFIG_AD7298 is not set
-# CONFIG_AD7303 is not set
-# CONFIG_AD7476 is not set
-# CONFIG_AD7606 is not set
-# CONFIG_AD7746 is not set
-# CONFIG_AD7766 is not set
-# CONFIG_AD7780 is not set
-# CONFIG_AD7791 is not set
-# CONFIG_AD7793 is not set
-# CONFIG_AD7816 is not set
-# CONFIG_AD7887 is not set
-# CONFIG_AD7923 is not set
-# CONFIG_AD799X is not set
-# CONFIG_AD8366 is not set
-# CONFIG_AD8801 is not set
-# CONFIG_AD9523 is not set
-# CONFIG_AD9832 is not set
-# CONFIG_AD9834 is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADE7753 is not set
-# CONFIG_ADE7754 is not set
-# CONFIG_ADE7758 is not set
-# CONFIG_ADE7759 is not set
-# CONFIG_ADE7854 is not set
-# CONFIG_ADF4350 is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADIS16060 is not set
-# CONFIG_ADIS16080 is not set
-# CONFIG_ADIS16130 is not set
-# CONFIG_ADIS16136 is not set
-# CONFIG_ADIS16201 is not set
-# CONFIG_ADIS16203 is not set
-# CONFIG_ADIS16204 is not set
-# CONFIG_ADIS16209 is not set
-# CONFIG_ADIS16220 is not set
-# CONFIG_ADIS16240 is not set
-# CONFIG_ADIS16260 is not set
-# CONFIG_ADIS16400 is not set
-# CONFIG_ADIS16480 is not set
-# CONFIG_ADJD_S311 is not set
-# CONFIG_ADM6996_PHY is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_ADT7316 is not set
-CONFIG_ADVISE_SYSCALLS=y
-# CONFIG_ADXL345_I2C is not set
-# CONFIG_ADXL345_SPI is not set
-# CONFIG_ADXRS450 is not set
-CONFIG_AEABI=y
-# CONFIG_AFE4403 is not set
-# CONFIG_AFE4404 is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_AF_KCM is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_AF_RXRPC_INJECT_LOSS is not set
-# CONFIG_AF_RXRPC_IPV6 is not set
-# CONFIG_AGP is not set
-# CONFIG_AHCI_CEVA is not set
-# CONFIG_AHCI_IMX is not set
-# CONFIG_AHCI_MVEBU is not set
-# CONFIG_AHCI_QORIQ is not set
-CONFIG_AIO=y
-# CONFIG_AIRO is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_AIX_PARTITION is not set
-# CONFIG_AK09911 is not set
-# CONFIG_AK8974 is not set
-# CONFIG_AK8975 is not set
-# CONFIG_AL3320A is not set
-# CONFIG_ALIM7101_WDT is not set
-CONFIG_ALLOW_DEV_COREDUMP=y
-# CONFIG_ALTERA_MBOX is not set
-# CONFIG_ALTERA_MSGDMA is not set
-# CONFIG_ALTERA_STAPL is not set
-# CONFIG_ALTERA_TSE is not set
-# CONFIG_ALX is not set
-# CONFIG_AM2315 is not set
-# CONFIG_AM335X_PHY_USB is not set
-# CONFIG_AMBA_PL08X is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_AMD_MEM_ENCRYPT is not set
-# CONFIG_AMD_PHY is not set
-# CONFIG_AMD_XGBE is not set
-# CONFIG_AMD_XGBE_HAVE_ECC is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_AMILO_RFKILL is not set
-# CONFIG_ANDROID is not set
-CONFIG_ANON_INODES=y
-# CONFIG_APDS9300 is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_APDS9960 is not set
-# CONFIG_APM8018X is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_APPLE_GMUX is not set
-# CONFIG_APPLE_PROPERTIES is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AQTION is not set
-# CONFIG_AQUANTIA_PHY is not set
-# CONFIG_AR5523 is not set
-# CONFIG_AR7 is not set
-# CONFIG_AR8216_PHY is not set
-# CONFIG_AR8216_PHY_LEDS is not set
-# CONFIG_ARCH_ACTIONS is not set
-# CONFIG_ARCH_ALPINE is not set
-# CONFIG_ARCH_ARTPEC is not set
-# CONFIG_ARCH_ASPEED is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCM is not set
-# CONFIG_ARCH_BCM2835 is not set
-# CONFIG_ARCH_BCM_21664 is not set
-# CONFIG_ARCH_BCM_23550 is not set
-# CONFIG_ARCH_BCM_281XX is not set
-# CONFIG_ARCH_BCM_5301X is not set
-# CONFIG_ARCH_BCM_53573 is not set
-# CONFIG_ARCH_BCM_63XX is not set
-# CONFIG_ARCH_BCM_CYGNUS is not set
-# CONFIG_ARCH_BCM_IPROC is not set
-# CONFIG_ARCH_BCM_NSP is not set
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_BRCMSTB is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGICOLOR is not set
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_EXYNOS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_GEMINI is not set
-CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
-# CONFIG_ARCH_HI3xxx is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_KEYSTONE is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_LG1K is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-CONFIG_ARCH_MMAP_RND_BITS=8
-CONFIG_ARCH_MMAP_RND_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_BITS_MIN=8
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_MULTIPLATFORM is not set
-# CONFIG_ARCH_MULTI_V6 is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_NSPIRE is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP2PLUS is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_OXNAS is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_REALTEK is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SEATTLE is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_SHMOBILE_MULTI is not set
-# CONFIG_ARCH_SIRF is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_SPRD is not set
-# CONFIG_ARCH_STI is not set
-# CONFIG_ARCH_STRATIX10 is not set
-# CONFIG_ARCH_SUNXI is not set
-# CONFIG_ARCH_TANGO is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_THUNDER is not set
-# CONFIG_ARCH_THUNDER2 is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_UNIPHIER is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_VIRT is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_VULCAN is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
-# CONFIG_ARCH_WM8505 is not set
-# CONFIG_ARCH_WM8750 is not set
-# CONFIG_ARCH_WM8850 is not set
-# CONFIG_ARCH_XGENE is not set
-# CONFIG_ARCH_ZX is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCNET is not set
-# CONFIG_ARC_EMAC is not set
-# CONFIG_ARM64_ERRATUM_819472 is not set
-# CONFIG_ARM64_ERRATUM_824069 is not set
-# CONFIG_ARM64_ERRATUM_826319 is not set
-# CONFIG_ARM64_ERRATUM_827319 is not set
-# CONFIG_ARM64_ERRATUM_832075 is not set
-# CONFIG_ARM64_ERRATUM_834220 is not set
-# CONFIG_ARM64_ERRATUM_843419 is not set
-# CONFIG_ARM64_ERRATUM_845719 is not set
-# CONFIG_ARM64_ERRATUM_858921 is not set
-# CONFIG_ARM64_RELOC_TEST is not set
-# CONFIG_ARM_APPENDED_DTB is not set
-# CONFIG_ARM_ARCH_TIMER is not set
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-# CONFIG_ARM_CCI is not set
-# CONFIG_ARM_CCI400_PMU is not set
-# CONFIG_ARM_CCI5xx_PMU is not set
-# CONFIG_ARM_CCN is not set
-# CONFIG_ARM_CPUIDLE is not set
-CONFIG_ARM_CPU_TOPOLOGY=y
-# CONFIG_ARM_CRYPTO is not set
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_364296 is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_643719 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_ARM_ERRATA_742230 is not set
-# CONFIG_ARM_ERRATA_742231 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_ARM_ERRATA_754322 is not set
-# CONFIG_ARM_ERRATA_754327 is not set
-# CONFIG_ARM_ERRATA_764369 is not set
-# CONFIG_ARM_ERRATA_773022 is not set
-# CONFIG_ARM_ERRATA_775420 is not set
-# CONFIG_ARM_ERRATA_798181 is not set
-# CONFIG_ARM_ERRATA_818325_852422 is not set
-# CONFIG_ARM_ERRATA_821420 is not set
-# CONFIG_ARM_ERRATA_825619 is not set
-# CONFIG_ARM_ERRATA_852421 is not set
-# CONFIG_ARM_ERRATA_852423 is not set
-CONFIG_ARM_GIC_MAX_NR=1
-# CONFIG_ARM_KERNMEM_PERMS is not set
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-# CONFIG_ARM_MHU is not set
-# CONFIG_ARM_MODULE_PLTS is not set
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-# CONFIG_ARM_PSCI is not set
-# CONFIG_ARM_PSCI_CHECKER is not set
-# CONFIG_ARM_PTDUMP is not set
-# CONFIG_ARM_SBSA_WATCHDOG is not set
-# CONFIG_ARM_SCPI_PROTOCOL is not set
-# CONFIG_ARM_TIMER_SP804 is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_ARM_VIRT_EXT is not set
-# CONFIG_AS3935 is not set
-# CONFIG_ASM9260_TIMER is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_ASUS_WIRELESS is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_AT91_SAMA5D2_ADC is not set
-# CONFIG_ATA is not set
-# CONFIG_ATAGS is not set
-CONFIG_ATAGS_PROC=y
-# CONFIG_ATALK is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_ATA_ACPI is not set
-CONFIG_ATA_BMDMA=y
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_ATA_PIIX is not set
-CONFIG_ATA_SFF=y
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_ATH10K is not set
-# CONFIG_ATH25 is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH6KL is not set
-# CONFIG_ATH79 is not set
-# CONFIG_ATH9K is not set
-# CONFIG_ATH9K_HTC is not set
-# CONFIG_ATH_DEBUG is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1C is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL2 is not set
-# CONFIG_ATLAS_PH_SENSOR is not set
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_ATMEL_PIT is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_ATM_BR2684_IPFILTER=y
-# CONFIG_ATM_CLIP is not set
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_MPOA is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_ATP is not set
-# CONFIG_AUDIT is not set
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
-# CONFIG_AURORA_NB8800 is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_AUTO_ZRELADDR is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_AX25 is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_AX88796 is not set
-# CONFIG_AXP20X_ADC is not set
-# CONFIG_AXP20X_POWER is not set
-# CONFIG_AXP288_ADC is not set
-# CONFIG_AXP288_FUEL_GAUGE is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_B44 is not set
-# CONFIG_B53 is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_APPLE is not set
-# CONFIG_BACKLIGHT_ARCXCNN is not set
-# CONFIG_BACKLIGHT_BD6107 is not set
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_BACKLIGHT_GPIO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_BACKLIGHT_LM3630A is not set
-# CONFIG_BACKLIGHT_LM3639 is not set
-# CONFIG_BACKLIGHT_LP855X is not set
-# CONFIG_BACKLIGHT_LV5207LP is not set
-# CONFIG_BACKLIGHT_PANDORA is not set
-# CONFIG_BACKLIGHT_PM8941_WLED is not set
-# CONFIG_BACKLIGHT_RPI is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-CONFIG_BASE_FULL=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_BATTERY_BQ27XXX is not set
-# CONFIG_BATTERY_BQ27XXX_HDQ is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2780 is not set
-# CONFIG_BATTERY_DS2781 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_GAUGE_LTC2941 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
-# CONFIG_BATTERY_LEGO_EV3 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_BATTERY_MAX1721X is not set
-# CONFIG_BATTERY_SBS is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BCACHE is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_BCM63XX_PHY is not set
-# CONFIG_BCM7038_WDT is not set
-# CONFIG_BCM7XXX_PHY is not set
-# CONFIG_BCM87XX_PHY is not set
-# CONFIG_BCMA is not set
-# CONFIG_BCMA_DRIVER_GPIO is not set
-CONFIG_BCMA_POSSIBLE=y
-# CONFIG_BCMGENET is not set
-# CONFIG_BCM_IPROC_ADC is not set
-# CONFIG_BCM_KONA_USB2_PHY is not set
-# CONFIG_BCM_SBA_RAID is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BE2NET is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_BGMAC is not set
-# CONFIG_BH1750 is not set
-# CONFIG_BH1780 is not set
-# CONFIG_BIG_KEYS is not set
-# CONFIG_BIG_LITTLE is not set
-# CONFIG_BINARY_PRINTF is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_BINFMT_SCRIPT=y
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_CMDLINE_PARSER is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_DEBUG_FS is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_CS5536 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDE_AU1XXX is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_NULL_BLK is not set
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_PMEM is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_RBD is not set
-# CONFIG_BLK_DEV_RSXX is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SKD is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_THROTTLING is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_ZONED is not set
-# CONFIG_BLK_SED_OPAL is not set
-# CONFIG_BLK_WBT is not set
-CONFIG_BLOCK=y
-# CONFIG_BMA180 is not set
-# CONFIG_BMA220 is not set
-# CONFIG_BMC150_ACCEL is not set
-# CONFIG_BMC150_MAGN is not set
-# CONFIG_BMC150_MAGN_I2C is not set
-# CONFIG_BMC150_MAGN_SPI is not set
-# CONFIG_BMG160 is not set
-# CONFIG_BMI160_I2C is not set
-# CONFIG_BMI160_SPI is not set
-# CONFIG_BMIPS_GENERIC is not set
-# CONFIG_BMP085 is not set
-# CONFIG_BMP085_I2C is not set
-# CONFIG_BMP085_SPI is not set
-# CONFIG_BMP280 is not set
-# CONFIG_BNA is not set
-# CONFIG_BNX2 is not set
-# CONFIG_BNX2X is not set
-# CONFIG_BNXT is not set
-# CONFIG_BONDING is not set
-# CONFIG_BOOKE_WDT is not set
-CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_BOOT_RAW=y
-CONFIG_BPF=y
-# CONFIG_BPF_JIT is not set
-# CONFIG_BPF_JIT_ALWAYS_ON is not set
-# CONFIG_BPF_STREAM_PARSER is not set
-CONFIG_BPF_SYSCALL=y
-# CONFIG_BPQETHER is not set
-CONFIG_BQL=y
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_BRCMFMAC is not set
-# CONFIG_BRCMSMAC is not set
-# CONFIG_BRCMSTB_GISB_ARB is not set
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_EBT_802_3 is not set
-# CONFIG_BRIDGE_EBT_AMONG is not set
-# CONFIG_BRIDGE_EBT_ARP is not set
-# CONFIG_BRIDGE_EBT_ARPREPLY is not set
-# CONFIG_BRIDGE_EBT_BROUTE is not set
-# CONFIG_BRIDGE_EBT_DNAT is not set
-# CONFIG_BRIDGE_EBT_IP is not set
-# CONFIG_BRIDGE_EBT_IP6 is not set
-# CONFIG_BRIDGE_EBT_LIMIT is not set
-# CONFIG_BRIDGE_EBT_LOG is not set
-# CONFIG_BRIDGE_EBT_MARK is not set
-# CONFIG_BRIDGE_EBT_MARK_T is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_BRIDGE_EBT_PKTTYPE is not set
-# CONFIG_BRIDGE_EBT_REDIRECT is not set
-# CONFIG_BRIDGE_EBT_SNAT is not set
-# CONFIG_BRIDGE_EBT_STP is not set
-# CONFIG_BRIDGE_EBT_T_FILTER is not set
-# CONFIG_BRIDGE_EBT_T_NAT is not set
-# CONFIG_BRIDGE_EBT_VLAN is not set
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_BRIDGE_NETFILTER is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_BRIDGE_VLAN_FILTERING is not set
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_BROKEN_ON_SMP=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_BT is not set
-# CONFIG_BTRFS_ASSERT is not set
-# CONFIG_BTRFS_DEBUG is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
-# CONFIG_BT_ATH3K is not set
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_BREDR is not set
-# CONFIG_BT_CMTP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTUSB_RTL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIUART_3WIRE is not set
-# CONFIG_BT_HCIUART_AG6XX is not set
-# CONFIG_BT_HCIUART_ATH3K is not set
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIUART_MRVL is not set
-# CONFIG_BT_HCIUART_QCA is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_HIDP is not set
-# CONFIG_BT_HS is not set
-# CONFIG_BT_LE is not set
-# CONFIG_BT_LEDS is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_RFCOMM is not set
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_SELFTEST is not set
-CONFIG_BUG=y
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-CONFIG_BUILDTIME_EXTABLE_SORT=y
-# CONFIG_BUILD_BIN2C is not set
-# CONFIG_C2PORT is not set
-CONFIG_CACHE_L2X0_PMU=y
-# CONFIG_CADENCE_WATCHDOG is not set
-# CONFIG_CAIF is not set
-# CONFIG_CAN is not set
-# CONFIG_CAN_BCM is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_CAN_DEV is not set
-# CONFIG_CAN_GS_USB is not set
-# CONFIG_CAN_GW is not set
-# CONFIG_CAN_HI311X is not set
-# CONFIG_CAN_IFI_CANFD is not set
-# CONFIG_CAN_MCBA_USB is not set
-# CONFIG_CAN_M_CAN is not set
-# CONFIG_CAN_PEAK_PCIEFD is not set
-# CONFIG_CAN_RAW is not set
-# CONFIG_CAN_RCAR is not set
-# CONFIG_CAN_RCAR_CANFD is not set
-# CONFIG_CAN_SLCAN is not set
-# CONFIG_CAN_SUN4I is not set
-# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_VXCAN is not set
-# CONFIG_CAPI_AVM is not set
-# CONFIG_CAPI_EICON is not set
-# CONFIG_CAPI_TRACE is not set
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CARL9170 is not set
-# CONFIG_CASSINI is not set
-# CONFIG_CAVIUM_CPT is not set
-# CONFIG_CAVIUM_ERRATUM_22375 is not set
-# CONFIG_CAVIUM_ERRATUM_23144 is not set
-# CONFIG_CAVIUM_ERRATUM_23154 is not set
-# CONFIG_CAVIUM_ERRATUM_27456 is not set
-# CONFIG_CAVIUM_ERRATUM_30115 is not set
-# CONFIG_CAVIUM_OCTEON_SOC is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_CC10001_ADC is not set
-# CONFIG_CCS811 is not set
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_CC_STACKPROTECTOR is not set
-CONFIG_CC_STACKPROTECTOR_NONE=y
-# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
-# CONFIG_CC_STACKPROTECTOR_STRONG is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_CFG80211 is not set
-# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_CGROUP_BPF is not set
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NET_CLASSID is not set
-# CONFIG_CGROUP_NET_PRIO is not set
-# CONFIG_CGROUP_RDMA is not set
-# CONFIG_CHARGER_BQ2415X is not set
-# CONFIG_CHARGER_BQ24190 is not set
-# CONFIG_CHARGER_BQ24257 is not set
-# CONFIG_CHARGER_BQ24735 is not set
-# CONFIG_CHARGER_BQ25890 is not set
-# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
-# CONFIG_CHARGER_GPIO is not set
-# CONFIG_CHARGER_ISP1704 is not set
-# CONFIG_CHARGER_LP8727 is not set
-# CONFIG_CHARGER_LTC3651 is not set
-# CONFIG_CHARGER_MANAGER is not set
-# CONFIG_CHARGER_MAX8903 is not set
-# CONFIG_CHARGER_RT9455 is not set
-# CONFIG_CHARGER_SBS is not set
-# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHARGER_TWL4030 is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_CHELSIO_T4VF is not set
-# CONFIG_CHROME_PLATFORMS is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_ACL is not set
-# CONFIG_CIFS_DEBUG is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_FSCACHE is not set
-# CONFIG_CIFS_NFSD_EXPORT is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_SMB2 is not set
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIO_DAC is not set
-# CONFIG_CLEANCACHE is not set
-# CONFIG_CLKSRC_VERSATILE is not set
-# CONFIG_CLK_HSDK is not set
-# CONFIG_CLK_QORIQ is not set
-# CONFIG_CLOCK_THERMAL is not set
-CONFIG_CLS_U32_MARK=y
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CM32181 is not set
-# CONFIG_CM3232 is not set
-# CONFIG_CM3323 is not set
-# CONFIG_CM3605 is not set
-# CONFIG_CM36651 is not set
-# CONFIG_CMA is not set
-CONFIG_CMDLINE=""
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_CMDLINE_EXTEND is not set
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
-# CONFIG_CMDLINE_PARTITION is not set
-# CONFIG_CNIC is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_COMEDI is not set
-# CONFIG_COMMON_CLK_CDCE706 is not set
-# CONFIG_COMMON_CLK_CDCE925 is not set
-# CONFIG_COMMON_CLK_CS2000_CP is not set
-# CONFIG_COMMON_CLK_IPROC is not set
-# CONFIG_COMMON_CLK_NXP is not set
-# CONFIG_COMMON_CLK_PIC32 is not set
-# CONFIG_COMMON_CLK_PWM is not set
-# CONFIG_COMMON_CLK_PXA is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-# CONFIG_COMMON_CLK_SI514 is not set
-# CONFIG_COMMON_CLK_SI5351 is not set
-# CONFIG_COMMON_CLK_SI570 is not set
-# CONFIG_COMMON_CLK_VC5 is not set
-# CONFIG_COMMON_CLK_VERSATILE is not set
-# CONFIG_COMMON_CLK_XGENE is not set
-# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
-# CONFIG_COMPACTION is not set
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_COMPILE_TEST is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
-CONFIG_CONSTRUCTORS=y
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_COPS is not set
-# CONFIG_CORDIC is not set
-# CONFIG_COREDUMP is not set
-# CONFIG_CORESIGHT is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_CORTINA_PHY is not set
-# CONFIG_CPA_DEBUG is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_CPU_IDLE_GOV_MENU is not set
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
-# CONFIG_CPU_NO_EFFICIENT_FFS is not set
-CONFIG_CPU_SW_DOMAIN_PAN=y
-# CONFIG_CRAMFS is not set
-CONFIG_CRASHLOG=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_BIT is not set
-CONFIG_CRC32_SARWATE=y
-# CONFIG_CRC32_SELFTEST is not set
-# CONFIG_CRC32_SLICEBY4 is not set
-# CONFIG_CRC32_SLICEBY8 is not set
-# CONFIG_CRC4 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_CRC8 is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CROSS_COMPILE=""
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_842 is not set
-# CONFIG_CRYPTO_AEAD is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_AES_ARM is not set
-# CONFIG_CRYPTO_AES_ARM_BS is not set
-# CONFIG_CRYPTO_AES_NI_INTEL is not set
-# CONFIG_CRYPTO_AES_TI is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CHACHA20 is not set
-# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
-# CONFIG_CRYPTO_CMAC is not set
-# CONFIG_CRYPTO_CRC32 is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
-# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
-# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
-# CONFIG_CRYPTO_DEV_CCP is not set
-# CONFIG_CRYPTO_DEV_CCREE is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
-# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_MXS_DCP is not set
-# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
-# CONFIG_CRYPTO_DEV_QAT_C62X is not set
-# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
-# CONFIG_CRYPTO_DEV_QCE is not set
-# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
-# CONFIG_CRYPTO_DEV_SAHARA is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_CRYPTO_DEV_VIRTIO is not set
-# CONFIG_CRYPTO_DH is not set
-# CONFIG_CRYPTO_DRBG_CTR is not set
-# CONFIG_CRYPTO_DRBG_HASH is not set
-# CONFIG_CRYPTO_DRBG_MENU is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_ECDH is not set
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
-# CONFIG_CRYPTO_HASH is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_CRYPTO_JITTERENTROPY is not set
-# CONFIG_CRYPTO_KEYWRAP is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_LZ4 is not set
-# CONFIG_CRYPTO_LZ4HC is not set
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_MCRYPTD is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_PCOMP is not set
-# CONFIG_CRYPTO_PCOMP2 is not set
-CONFIG_CRYPTO_PCRYPT=y
-# CONFIG_CRYPTO_POLY1305 is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_RNG is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SALSA20_586 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA1_ARM is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA3 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_TWOFISH_COMMON is not set
-# CONFIG_CRYPTO_USER is not set
-# CONFIG_CRYPTO_USER_API_AEAD is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_RNG is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-# CONFIG_CRYPTO_VMAC is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CS5535_MFGPT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_CUSE is not set
-# CONFIG_CW1200 is not set
-# CONFIG_CXL_AFU_DRIVER_OPS is not set
-# CONFIG_CXL_BASE is not set
-# CONFIG_CXL_EEH is not set
-# CONFIG_CXL_KERNEL_API is not set
-# CONFIG_CXL_LIB is not set
-# CONFIG_CYPRESS_FIRMWARE is not set
-# CONFIG_DA280 is not set
-# CONFIG_DA311 is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_DAX is not set
-# CONFIG_DCB is not set
-# CONFIG_DDR is not set
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_INFO_DWARF4 is not set
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_DEBUG_INFO_SPLIT is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_KOBJECT_RELEASE is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_PAGE_REF is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_DEBUG_PI_LIST is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RODATA is not set
-# CONFIG_DEBUG_RODATA_TEST is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-# CONFIG_DEBUG_SEMIHOSTING is not set
-# CONFIG_DEBUG_SET_MODULE_RONX is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
-# CONFIG_DEBUG_TIMEKEEPING is not set
-# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
-# CONFIG_DEBUG_UART_BCM63XX is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_WX is not set
-# CONFIG_DEBUG_ZBOOT is not set
-# CONFIG_DECNET is not set
-CONFIG_DEFAULT_CUBIC=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_DEFAULT_NOOP is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-# CONFIG_DELL_LAPTOP is not set
-# CONFIG_DELL_RBTN is not set
-# CONFIG_DELL_SMO8800 is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_DEVMEM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_DEVTMPFS is not set
-# CONFIG_DEVTMPFS_MOUNT is not set
-# CONFIG_DEV_DAX is not set
-# CONFIG_DGAP is not set
-# CONFIG_DGNC is not set
-# CONFIG_DHT11 is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
-# CONFIG_DISPLAY_CONNECTOR_DVI is not set
-# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
-# CONFIG_DISPLAY_ENCODER_TFP410 is not set
-# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
-# CONFIG_DISPLAY_PANEL_DPI is not set
-# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DL2K is not set
-# CONFIG_DLM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_DMARD06 is not set
-# CONFIG_DMARD09 is not set
-# CONFIG_DMARD10 is not set
-# CONFIG_DMASCC is not set
-# CONFIG_DMATEST is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_DMA_ENGINE is not set
-# CONFIG_DMA_FENCE_TRACE is not set
-# CONFIG_DMA_SHARED_BUFFER is not set
-# CONFIG_DM_CACHE is not set
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_ERA is not set
-# CONFIG_DM_FLAKEY is not set
-# CONFIG_DM_INTEGRITY is not set
-# CONFIG_DM_LOG_USERSPACE is not set
-# CONFIG_DM_LOG_WRITES is not set
-# CONFIG_DM_MQ_DEFAULT is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_RAID is not set
-# CONFIG_DM_SWITCH is not set
-# CONFIG_DM_THIN_PROVISIONING is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_DM_VERITY is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DNET is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_DNS_RESOLVER is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_DP83848_PHY is not set
-# CONFIG_DP83867_PHY is not set
-# CONFIG_DPOT_DAC is not set
-CONFIG_DQL=y
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_DRM is not set
-# CONFIG_DRM_AMDGPU is not set
-# CONFIG_DRM_ANALOGIX_ANX78XX is not set
-# CONFIG_DRM_ARCPGU is not set
-# CONFIG_DRM_ARMADA is not set
-# CONFIG_DRM_AST is not set
-# CONFIG_DRM_BOCHS is not set
-# CONFIG_DRM_CIRRUS_QEMU is not set
-# CONFIG_DRM_DEBUG_MM is not set
-# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
-# CONFIG_DRM_DP_AUX_CHARDEV is not set
-# CONFIG_DRM_DUMB_VGA_DAC is not set
-# CONFIG_DRM_DW_HDMI_CEC is not set
-# CONFIG_DRM_ETNAVIV is not set
-# CONFIG_DRM_EXYNOS is not set
-# CONFIG_DRM_FBDEV_EMULATION is not set
-# CONFIG_DRM_FSL_DCU is not set
-# CONFIG_DRM_HDLCD is not set
-# CONFIG_DRM_HISI_HIBMC is not set
-# CONFIG_DRM_HISI_KIRIN is not set
-# CONFIG_DRM_I2C_ADV7511 is not set
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_NXP_TDA998X is not set
-# CONFIG_DRM_I2C_SIL164 is not set
-# CONFIG_DRM_LEGACY is not set
-# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
-# CONFIG_DRM_LVDS_ENCODER is not set
-# CONFIG_DRM_MALI_DISPLAY is not set
-# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
-# CONFIG_DRM_MGAG200 is not set
-# CONFIG_DRM_MXSFB is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_NXP_PTN3460 is not set
-# CONFIG_DRM_OMAP is not set
-# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
-# CONFIG_DRM_PANEL_LG_LG4573 is not set
-# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
-# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
-# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
-# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
-# CONFIG_DRM_PARADE_PS8622 is not set
-# CONFIG_DRM_PL111 is not set
-# CONFIG_DRM_QXL is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_RCAR_DW_HDMI is not set
-# CONFIG_DRM_SII902X is not set
-# CONFIG_DRM_SIL_SII8620 is not set
-# CONFIG_DRM_STI is not set
-# CONFIG_DRM_STM is not set
-# CONFIG_DRM_TILCDC is not set
-# CONFIG_DRM_TINYDRM is not set
-# CONFIG_DRM_TI_TFP410 is not set
-# CONFIG_DRM_TOSHIBA_TC358767 is not set
-# CONFIG_DRM_UDL is not set
-# CONFIG_DRM_VBOXVIDEO is not set
-# CONFIG_DRM_VGEM is not set
-# CONFIG_DS1682 is not set
-# CONFIG_DS1803 is not set
-# CONFIG_DST_CACHE is not set
-# CONFIG_DTLK is not set
-# CONFIG_DUMMY is not set
-CONFIG_DUMMY_CONSOLE_COLUMNS=80
-CONFIG_DUMMY_CONSOLE_ROWS=25
-# CONFIG_DUMMY_IRQ is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-# CONFIG_DWC_XLGMAC is not set
-# CONFIG_DWMAC_IPQ806X is not set
-# CONFIG_DWMAC_LPC18XX is not set
-# CONFIG_DWMAC_MESON is not set
-# CONFIG_DWMAC_ROCKCHIP is not set
-# CONFIG_DWMAC_SOCFPGA is not set
-# CONFIG_DWMAC_STI is not set
-# CONFIG_DW_DMAC is not set
-# CONFIG_DW_DMAC_PCI is not set
-# CONFIG_DW_WATCHDOG is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_E100 is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_HWTS is not set
-# CONFIG_EARLY_PRINTK_8250 is not set
-# CONFIG_EARLY_PRINTK_USB_XDBC is not set
-# CONFIG_ECHO is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_EDAC is not set
-# CONFIG_EEEPC_LAPTOP is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
-# CONFIG_EEPROM_IDT_89HPESX is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EFI is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_EFS_FS is not set
-CONFIG_ELFCORE=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_EMAC_ROCKCHIP is not set
-CONFIG_EMBEDDED=y
-# CONFIG_EM_TIMER_STI is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENA_ETHERNET is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_ENCX24J600 is not set
-# CONFIG_ENIC is not set
-# CONFIG_ENVELOPE_DETECTOR is not set
-# CONFIG_EPAPR_PARAVIRT is not set
-# CONFIG_EPIC100 is not set
-CONFIG_EPOLL=y
-# CONFIG_EQUALIZER is not set
-# CONFIG_ET131X is not set
-CONFIG_ETHERNET=y
-# CONFIG_ETHOC is not set
-CONFIG_EVENTFD=y
-CONFIG_EXPERT=y
-# CONFIG_EXPORTFS is not set
-# CONFIG_EXPORTFS_BLOCK_OPS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_DEBUG is not set
-# CONFIG_EXT4_ENCRYPTION is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_EXT4_USE_FOR_EXT2=y
-# CONFIG_EXTCON is not set
-# CONFIG_EXTCON_ADC_JACK is not set
-# CONFIG_EXTCON_AXP288 is not set
-# CONFIG_EXTCON_GPIO is not set
-# CONFIG_EXTCON_INTEL_INT3496 is not set
-# CONFIG_EXTCON_MAX3355 is not set
-# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
-# CONFIG_EXTCON_RT8973A is not set
-# CONFIG_EXTCON_SM5502 is not set
-# CONFIG_EXTCON_USB_GPIO is not set
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_EXYNOS_ADC is not set
-# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_F2FS_FAULT_INJECTION is not set
-# CONFIG_F2FS_FS is not set
-# CONFIG_F2FS_FS_ENCRYPTION is not set
-# CONFIG_F2FS_FS_POSIX_ACL is not set
-# CONFIG_F2FS_IO_TRACE is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_FANOTIFY is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_FAT_DEFAULT_UTF8 is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FB is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_AUO_K190X is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_BOTH_ENDIAN is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_DA8XX is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_IMX is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_MXS is not set
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_NEOMAGIC is not set
-CONFIG_FB_NOTIFY=y
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_OMAP2 is not set
-# CONFIG_FB_OPENCORES is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_PS3 is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIMPLE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_SM712 is not set
-# CONFIG_FB_SM750 is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_SSD1307 is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_TFT is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_FCOE is not set
-# CONFIG_FCOE_FNIC is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_FENCE_TRACE is not set
-# CONFIG_FHANDLE is not set
-CONFIG_FIB_RULES=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_FIREWIRE_SERIAL is not set
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FLATMEM=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FM10K is not set
-# CONFIG_FMC is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_FORTIFY_SOURCE=y
-# CONFIG_FPGA is not set
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_FREEZER is not set
-# CONFIG_FRONTSWAP is not set
-# CONFIG_FSCACHE is not set
-# CONFIG_FSI is not set
-# CONFIG_FSL_EDMA is not set
-# CONFIG_FSL_ERRATUM_A008585 is not set
-# CONFIG_FSL_MC_BUS is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_FSL_XGMAC_MDIO is not set
-CONFIG_FSNOTIFY=y
-# CONFIG_FS_DAX is not set
-# CONFIG_FS_ENCRYPTION is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FTGMAC100 is not set
-# CONFIG_FTL is not set
-# CONFIG_FTMAC100 is not set
-# CONFIG_FTRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_FUJITSU_ES is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_FUJITSU_TABLET is not set
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_FUSE_FS is not set
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
-CONFIG_FUTEX=y
-# CONFIG_FW_CFG_SYSFS is not set
-CONFIG_FW_LOADER=y
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-CONFIG_GACT_PROB=y
-# CONFIG_GADGET_UAC1 is not set
-# CONFIG_GAMEPORT is not set
-# CONFIG_GATEWORKS_GW16083 is not set
-# CONFIG_GCC_PLUGINS is not set
-# CONFIG_GCOV is not set
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_GDB_SCRIPTS is not set
-# CONFIG_GENERIC_ADC_BATTERY is not set
-# CONFIG_GENERIC_ADC_THERMAL is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_IRQ_DEBUGFS is not set
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_NET_UTILS=y
-# CONFIG_GENERIC_PHY is not set
-# CONFIG_GENEVE is not set
-# CONFIG_GENWQE is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_GIGASET_CAPI is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GIGASET_DUMMYLL is not set
-# CONFIG_GLOB_SELFTEST is not set
-# CONFIG_GOLDFISH is not set
-# CONFIG_GOOGLE_FIRMWARE is not set
-# CONFIG_GP2AP020A00F is not set
-# CONFIG_GPIOLIB is not set
-# CONFIG_GPIO_74X164 is not set
-# CONFIG_GPIO_74XX_MMIO is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_GPIO_ADP5588 is not set
-# CONFIG_GPIO_ALTERA is not set
-# CONFIG_GPIO_AMD8111 is not set
-# CONFIG_GPIO_AMDPT is not set
-# CONFIG_GPIO_BCM_KONA is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_DWAPB is not set
-# CONFIG_GPIO_EM is not set
-# CONFIG_GPIO_EXAR is not set
-# CONFIG_GPIO_F7188X is not set
-# CONFIG_GPIO_FTGPIO010 is not set
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_GPIO_MM is not set
-# CONFIG_GPIO_GRGPIO is not set
-# CONFIG_GPIO_ICH is not set
-# CONFIG_GPIO_IT87 is not set
-# CONFIG_GPIO_LYNXPOINT is not set
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_ML_IOH is not set
-# CONFIG_GPIO_MOCKUP is not set
-# CONFIG_GPIO_MPC8XXX is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_PCH is not set
-# CONFIG_GPIO_PCI_IDIO_16 is not set
-# CONFIG_GPIO_PISOSR is not set
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_GPIO_RCAR is not set
-# CONFIG_GPIO_RDC321X is not set
-# CONFIG_GPIO_SCH is not set
-# CONFIG_GPIO_SCH311X is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_SYSCON is not set
-# CONFIG_GPIO_SYSFS is not set
-# CONFIG_GPIO_TPIC2810 is not set
-# CONFIG_GPIO_TS4900 is not set
-# CONFIG_GPIO_TS5500 is not set
-# CONFIG_GPIO_VX855 is not set
-# CONFIG_GPIO_WATCHDOG is not set
-# CONFIG_GPIO_WS16C48 is not set
-# CONFIG_GPIO_XGENE is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_XRA1403 is not set
-# CONFIG_GPIO_ZEVIO is not set
-# CONFIG_GPIO_ZX is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_GREYBUS is not set
-# CONFIG_GS_FPGABOOT is not set
-# CONFIG_GTP is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_HARDENED_USERCOPY is not set
-# CONFIG_HARDEN_BRANCH_PREDICTOR is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
-# CONFIG_HAVE_ARCH_HASH is not set
-CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
-# CONFIG_HAVE_ARCH_VMAP_STACK is not set
-CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
-# CONFIG_HAVE_ARM_ARCH_TIMER is not set
-CONFIG_HAVE_EXIT_THREAD=y
-CONFIG_HAVE_GCC_PLUGINS=y
-CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_CAT=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_NMI=y
-# CONFIG_HCALL_STATS is not set
-# CONFIG_HDC100X is not set
-# CONFIG_HDLC is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDMI_LPE_AUDIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_HERMES is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFS_FS_POSIX_ACL is not set
-# CONFIG_HI8435 is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_HID is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_ACCUTOUCH is not set
-# CONFIG_HID_ACRUX is not set
-# CONFIG_HID_ACRUX_FF is not set
-# CONFIG_HID_ALPS is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_APPLEIR is not set
-# CONFIG_HID_ASUS is not set
-# CONFIG_HID_AUREAL is not set
-# CONFIG_HID_BATTERY_STRENGTH is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BETOP_FF is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CMEDIA is not set
-# CONFIG_HID_CORSAIR is not set
-# CONFIG_HID_CP2112 is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_ELECOM is not set
-# CONFIG_HID_ELO is not set
-# CONFIG_HID_EMS_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_GEMBIRD is not set
-# CONFIG_HID_GENERIC is not set
-# CONFIG_HID_GFRM is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_GT683R is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_HOLTEK is not set
-# CONFIG_HID_ICADE is not set
-# CONFIG_HID_ITE is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_KEYTOUCH is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_LCPOWER is not set
-# CONFIG_HID_LED is not set
-# CONFIG_HID_LENOVO is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_LOGITECH_DJ is not set
-# CONFIG_HID_LOGITECH_HIDPP is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MAYFLASH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_MULTITOUCH is not set
-# CONFIG_HID_NTI is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PENMOUNT is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_PID is not set
-# CONFIG_HID_PLANTRONICS is not set
-# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_RETRODE is not set
-# CONFIG_HID_RMI is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_SAITEK is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SENSOR_HUB is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SPEEDLINK is not set
-# CONFIG_HID_STEELSERIES is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_THINGM is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_TIVO is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_UCLOGIC is not set
-# CONFIG_HID_UDRAW_PS3 is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_WALTOP is not set
-# CONFIG_HID_WIIMOTE is not set
-# CONFIG_HID_XINMO is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_HINIC is not set
-# CONFIG_HIP04_ETH is not set
-# CONFIG_HIPPI is not set
-# CONFIG_HISILICON_ERRATUM_161010101 is not set
-# CONFIG_HISI_FEMAC is not set
-# CONFIG_HIX5HD2_GMAC is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_HNS is not set
-# CONFIG_HNS3 is not set
-# CONFIG_HNS_DSAF is not set
-# CONFIG_HNS_ENET is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HP03 is not set
-# CONFIG_HP100 is not set
-# CONFIG_HP206C is not set
-CONFIG_HPET_MMAP_DEFAULT=y
-# CONFIG_HPFS_FS is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_HP_WIRELESS is not set
-# CONFIG_HSI is not set
-# CONFIG_HSR is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTS221 is not set
-# CONFIG_HTU21 is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_HWLAT_TRACER is not set
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWSPINLOCK is not set
-# CONFIG_HWSPINLOCK_OMAP is not set
-CONFIG_HW_PERF_EVENTS=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HW_RANDOM_AMD is not set
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_CAVIUM is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
-# CONFIG_HW_RANDOM_GEODE is not set
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
-# CONFIG_HW_RANDOM_OMAP3_ROM is not set
-# CONFIG_HW_RANDOM_PPC4XX is not set
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_HW_RANDOM_TPM is not set
-# CONFIG_HW_RANDOM_VIA is not set
-# CONFIG_HW_RANDOM_VIRTIO is not set
-# CONFIG_HX711 is not set
-# CONFIG_HYPERV is not set
-# CONFIG_HYPERV_TSCPAGE is not set
-# CONFIG_HYSDN is not set
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_200 is not set
-# CONFIG_HZ_24 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_500 is not set
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCA is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
-# CONFIG_I2C_AU1550 is not set
-# CONFIG_I2C_BCM2835 is not set
-# CONFIG_I2C_BCM_IPROC is not set
-# CONFIG_I2C_CADENCE is not set
-# CONFIG_I2C_CBUS_GPIO is not set
-# CONFIG_I2C_CHARDEV is not set
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEMUX_PINCTRL is not set
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_EMEV2 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_HID is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_IMG is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_ISMT is not set
-# CONFIG_I2C_MLXCPLD is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_MUX_GPIO is not set
-# CONFIG_I2C_MUX_GPMUX is not set
-# CONFIG_I2C_MUX_LTC4306 is not set
-# CONFIG_I2C_MUX_MLXCPLD is not set
-# CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
-# CONFIG_I2C_MUX_PINCTRL is not set
-# CONFIG_I2C_MUX_REG is not set
-# CONFIG_I2C_MV64XXX is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_NOMADIK is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OCTEON is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_RCAR is not set
-# CONFIG_I2C_RK3X is not set
-# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
-# CONFIG_I2C_SCMI is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_SLAVE is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_THUNDERX is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VERSATILE is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_XILINX is not set
-# CONFIG_I40E is not set
-# CONFIG_I40EVF is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IAQCORE is not set
-# CONFIG_IBM_ASM is not set
-# CONFIG_IBM_EMAC_DEBUG is not set
-# CONFIG_IBM_EMAC_EMAC4 is not set
-# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_EMAC_RGMII is not set
-# CONFIG_IBM_EMAC_TAH is not set
-# CONFIG_IBM_EMAC_ZMII is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_IDE is not set
-# CONFIG_IDEAPAD_LAPTOP is not set
-# CONFIG_IDE_GD is not set
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDLE_PAGE_TRACKING is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_IEEE802154_ADF7242 is not set
-# CONFIG_IEEE802154_ATUSB is not set
-# CONFIG_IEEE802154_CA8210 is not set
-# CONFIG_IFB is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_IIO is not set
-# CONFIG_IIO_BUFFER_CB is not set
-# CONFIG_IIO_CONFIGFS is not set
-CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
-# CONFIG_IIO_INTERRUPT_TRIGGER is not set
-# CONFIG_IIO_MUX is not set
-# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_IIO_SSP_SENSORHUB is not set
-# CONFIG_IIO_ST_ACCEL_3AXIS is not set
-# CONFIG_IIO_ST_GYRO_3AXIS is not set
-# CONFIG_IIO_ST_LSM6DSX is not set
-# CONFIG_IIO_ST_MAGN_3AXIS is not set
-# CONFIG_IIO_ST_PRESS is not set
-# CONFIG_IIO_SW_DEVICE is not set
-# CONFIG_IIO_SW_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-# CONFIG_IMGPDC_WDT is not set
-# CONFIG_IMG_MDC_DMA is not set
-# CONFIG_IMX7D_ADC is not set
-# CONFIG_IMX_IPUV3_CORE is not set
-# CONFIG_IMX_THERMAL is not set
-# CONFIG_INA2XX_ADC is not set
-CONFIG_INET=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_TCP_DIAG is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_UDP_DIAG is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_INFTL is not set
-CONFIG_INIT_ENV_ARG_LIMIT=32
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_CMA3000 is not set
-# CONFIG_INPUT_DRV260X_HAPTICS is not set
-# CONFIG_INPUT_DRV2665_HAPTICS is not set
-# CONFIG_INPUT_DRV2667_HAPTICS is not set
-# CONFIG_INPUT_E3X0_BUTTON is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_BEEPER is not set
-# CONFIG_INPUT_GPIO_DECODER is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
-# CONFIG_INPUT_IMS_PCU is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_LEDS is not set
-# CONFIG_INPUT_MATRIXKMAP is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_PWM_BEEPER is not set
-# CONFIG_INPUT_PWM_VIBRA is not set
-# CONFIG_INPUT_REGULATOR_HAPTIC is not set
-# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_TWL6040_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INT340X_THERMAL is not set
-# CONFIG_INTEL_CHT_INT33FE is not set
-# CONFIG_INTEL_HID_EVENT is not set
-# CONFIG_INTEL_IDLE is not set
-# CONFIG_INTEL_IDMA64 is not set
-# CONFIG_INTEL_IOATDMA is not set
-# CONFIG_INTEL_ISH_HID is not set
-# CONFIG_INTEL_MEI is not set
-# CONFIG_INTEL_MEI_ME is not set
-# CONFIG_INTEL_MEI_TXE is not set
-# CONFIG_INTEL_MIC_CARD is not set
-# CONFIG_INTEL_MIC_HOST is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_INTEL_OAKTRAIL is not set
-# CONFIG_INTEL_PMC_CORE is not set
-# CONFIG_INTEL_PUNIT_IPC is not set
-# CONFIG_INTEL_RST is not set
-# CONFIG_INTEL_SMARTCONNECT is not set
-# CONFIG_INTEL_SOC_PMIC is not set
-# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
-# CONFIG_INTEL_TH is not set
-# CONFIG_INTEL_VBTN is not set
-# CONFIG_INTEL_XWAY_PHY is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_INV_MPU6050_I2C is not set
-# CONFIG_INV_MPU6050_IIO is not set
-# CONFIG_INV_MPU6050_SPI is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_IOSCHED_BFQ is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IO_STRICT_DEVMEM=y
-# CONFIG_IP17XX_PHY is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_SRH is not set
-# CONFIG_IP6_NF_NAT is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
-# CONFIG_IPACK_BUS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPV6 is not set
-# CONFIG_IPV6_FOU is not set
-# CONFIG_IPV6_FOU_TUNNEL is not set
-# CONFIG_IPV6_ILA is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_SEG6_HMAC is not set
-# CONFIG_IPV6_SEG6_LWTUNNEL is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_SIT_6RD is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_VTI is not set
-# CONFIG_IPVLAN is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2200 is not set
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_IPX is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_FIB_TRIE_STATS is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_SYNPROXY is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_IP_PNP is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_IP_SET is not set
-# CONFIG_IP_SET_HASH_IPMAC is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IRDA is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_IRQ_POLL is not set
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-# CONFIG_IR_GPIO_CIR is not set
-# CONFIG_IR_HIX5HD2 is not set
-# CONFIG_IR_IGORPLUGUSB is not set
-# CONFIG_IR_IGUANA is not set
-# CONFIG_IR_IMG is not set
-# CONFIG_IR_IMON is not set
-# CONFIG_IR_JVC_DECODER is not set
-# CONFIG_IR_LIRC_CODEC is not set
-# CONFIG_IR_MCEUSB is not set
-# CONFIG_IR_NEC_DECODER is not set
-# CONFIG_IR_RC5_DECODER is not set
-# CONFIG_IR_RC6_DECODER is not set
-# CONFIG_IR_REDRAT3 is not set
-# CONFIG_IR_SONY_DECODER is not set
-# CONFIG_IR_STREAMZAP is not set
-# CONFIG_IR_TTUSBIR is not set
-# CONFIG_ISA_BUS is not set
-# CONFIG_ISA_BUS_API is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_ISCSI_TCP is not set
-CONFIG_ISDN=y
-# CONFIG_ISDN_AUDIO is not set
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_CAPI_CAPIDRV is not set
-# CONFIG_ISDN_DIVERSION is not set
-# CONFIG_ISDN_DRV_ACT2000 is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_ISDN_DRV_HISAX is not set
-# CONFIG_ISDN_DRV_ICN is not set
-# CONFIG_ISDN_DRV_LOOP is not set
-# CONFIG_ISDN_DRV_PCBIT is not set
-# CONFIG_ISDN_DRV_SC is not set
-# CONFIG_ISDN_I4L is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_ISL29125 is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_ISS4xx is not set
-# CONFIG_ITG3200 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IXGB is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_LZMA=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_ZLIB is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_JME is not set
-CONFIG_JOLIET=y
-# CONFIG_JSA1212 is not set
-# CONFIG_JUMP_LABEL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_BASE_RELATIVE=y
-# CONFIG_KALLSYMS_UNCOMPRESSED is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_KASAN is not set
-# CONFIG_KCOV is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_CAT is not set
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_LZ4 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_KERNEL_XZ=y
-CONFIG_KERNFS=y
-# CONFIG_KEXEC is not set
-# CONFIG_KEXEC_FILE is not set
-# CONFIG_KEYBOARD_ADC is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_BCM is not set
-# CONFIG_KEYBOARD_CAP11XX is not set
-# CONFIG_KEYBOARD_DLINK_DIR685 is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_LM8333 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYS is not set
-# CONFIG_KEY_DH_OPERATIONS is not set
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_KMX61 is not set
-# CONFIG_KPROBES is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_KS7010 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_KSM is not set
-# CONFIG_KSZ884X_PCI is not set
-CONFIG_KUSER_HELPERS=y
-# CONFIG_KVM_AMD is not set
-# CONFIG_KVM_GUEST is not set
-# CONFIG_KVM_INTEL is not set
-# CONFIG_KXCJK1013 is not set
-# CONFIG_KXSD9 is not set
-# CONFIG_L2TP is not set
-# CONFIG_L2TP_ETH is not set
-# CONFIG_L2TP_IP is not set
-# CONFIG_L2TP_V3 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_LANTIQ is not set
-# CONFIG_LAPB is not set
-# CONFIG_LASAT is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-CONFIG_LBDAF=y
-# CONFIG_LCD_AMS369FG06 is not set
-# CONFIG_LCD_HX8357 is not set
-# CONFIG_LCD_ILI922X is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LMS501KF03 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y
-# CONFIG_LEDS_BCM6328 is not set
-# CONFIG_LEDS_BCM6358 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_BLINKM is not set
-CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
-CONFIG_LEDS_CLASS=y
-# CONFIG_LEDS_CLASS_FLASH is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_INTEL_SS4200 is not set
-# CONFIG_LEDS_IS31FL319X is not set
-# CONFIG_LEDS_IS31FL32XX is not set
-# CONFIG_LEDS_LM3530 is not set
-# CONFIG_LEDS_LM355x is not set
-# CONFIG_LEDS_LM3642 is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP3952 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LP5523 is not set
-# CONFIG_LEDS_LP5562 is not set
-# CONFIG_LEDS_LP8501 is not set
-# CONFIG_LEDS_LP8860 is not set
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_MLXCPLD is not set
-# CONFIG_LEDS_NIC78BX is not set
-# CONFIG_LEDS_NS2 is not set
-# CONFIG_LEDS_OT200 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_PCA963X is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_SYSCON is not set
-# CONFIG_LEDS_TCA6507 is not set
-# CONFIG_LEDS_TLC591XX is not set
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_CAMERA is not set
-# CONFIG_LEDS_TRIGGER_CPU is not set
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_LEDS_TRIGGER_DISK is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-# CONFIG_LEDS_TRIGGER_MTD is not set
-CONFIG_LEDS_TRIGGER_NETDEV=y
-# CONFIG_LEDS_TRIGGER_ONESHOT is not set
-# CONFIG_LEDS_TRIGGER_PANIC is not set
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
-# CONFIG_LEDS_USER is not set
-# CONFIG_LED_TRIGGER_PHY is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LGUEST is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_LIB80211_CRYPT_CCMP is not set
-# CONFIG_LIB80211_CRYPT_TKIP is not set
-# CONFIG_LIB80211_CRYPT_WEP is not set
-# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_LIBIPW_DEBUG is not set
-# CONFIG_LIBNVDIMM is not set
-# CONFIG_LIDAR_LITE_V2 is not set
-# CONFIG_LIQUIDIO is not set
-# CONFIG_LIQUIDIO_VF is not set
-# CONFIG_LIRC_STAGING is not set
-# CONFIG_LIS3L02DQ is not set
-# CONFIG_LKDTM is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_LMP91000 is not set
-# CONFIG_LNET is not set
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_LOCKD is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_LOCKD_V4=y
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
-# CONFIG_LOGFS is not set
-# CONFIG_LOGIG940_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIWHEELS_FF is not set
-# CONFIG_LOGO is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
-# CONFIG_LOONGSON_MC146818 is not set
-# CONFIG_LPC_ICH is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_LTC2471 is not set
-# CONFIG_LTC2485 is not set
-# CONFIG_LTC2497 is not set
-# CONFIG_LTC2632 is not set
-# CONFIG_LTE_GDM724X is not set
-# CONFIG_LTPC is not set
-# CONFIG_LTR501 is not set
-# CONFIG_LUSTRE_FS is not set
-# CONFIG_LWTUNNEL is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_LZ4HC_COMPRESS is not set
-# CONFIG_LZ4_COMPRESS is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-CONFIG_LZMA_COMPRESS=y
-CONFIG_LZMA_DECOMPRESS=y
-# CONFIG_LZO_COMPRESS is not set
-# CONFIG_LZO_DECOMPRESS is not set
-# CONFIG_M62332 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_MAC80211_MESSAGE_TRACING is not set
-CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
-# CONFIG_MACB is not set
-# CONFIG_MACH_ASM9260 is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
-# CONFIG_MACH_PIC32 is not set
-# CONFIG_MACH_PISTACHIO is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MACH_XILFPGA is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_MACSEC is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_MACVTAP is not set
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MAG3110 is not set
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
-# CONFIG_MAGIC_SYSRQ_SERIAL is not set
-# CONFIG_MAILBOX is not set
-# CONFIG_MANDATORY_FILE_LOCKING is not set
-# CONFIG_MANGLE_BOOTARGS is not set
-# CONFIG_MARVELL_10G_PHY is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MAX1027 is not set
-# CONFIG_MAX11100 is not set
-# CONFIG_MAX1118 is not set
-# CONFIG_MAX1363 is not set
-# CONFIG_MAX30100 is not set
-# CONFIG_MAX30102 is not set
-# CONFIG_MAX44000 is not set
-# CONFIG_MAX517 is not set
-# CONFIG_MAX5481 is not set
-# CONFIG_MAX5487 is not set
-# CONFIG_MAX5821 is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MAX9611 is not set
-# CONFIG_MAXIM_THERMOCOUPLE is not set
-CONFIG_MAY_USE_DEVLINK=y
-# CONFIG_MC3230 is not set
-# CONFIG_MCB is not set
-# CONFIG_MCP320X is not set
-# CONFIG_MCP3422 is not set
-# CONFIG_MCP4131 is not set
-# CONFIG_MCP4531 is not set
-# CONFIG_MCP4725 is not set
-# CONFIG_MCP4922 is not set
-# CONFIG_MCPM is not set
-# CONFIG_MD is not set
-# CONFIG_MDIO_BCM_UNIMAC is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_MDIO_DEVICE is not set
-# CONFIG_MDIO_HISI_FEMAC is not set
-# CONFIG_MDIO_OCTEON is not set
-# CONFIG_MDIO_THUNDER is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
-# CONFIG_MEDIA_ATTACH is not set
-# CONFIG_MEDIA_CAMERA_SUPPORT is not set
-# CONFIG_MEDIA_CEC_SUPPORT is not set
-# CONFIG_MEDIA_CONTROLLER is not set
-# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
-# CONFIG_MEDIA_PCI_SUPPORT is not set
-# CONFIG_MEDIA_RADIO_SUPPORT is not set
-# CONFIG_MEDIA_RC_SUPPORT is not set
-# CONFIG_MEDIA_SDR_SUPPORT is not set
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_MEDIA_USB_SUPPORT is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
-CONFIG_MEMBARRIER=y
-# CONFIG_MEMORY is not set
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MEN_A21_WDT is not set
-# CONFIG_MESON_SM is not set
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
-# CONFIG_MFD_88PM800 is not set
-# CONFIG_MFD_88PM805 is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_ACT8945A is not set
-# CONFIG_MFD_ARIZONA_I2C is not set
-# CONFIG_MFD_ARIZONA_SPI is not set
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_MFD_AS3722 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_ATMEL_FLEXCOM is not set
-# CONFIG_MFD_ATMEL_HLCDC is not set
-# CONFIG_MFD_AXP20X is not set
-# CONFIG_MFD_AXP20X_I2C is not set
-# CONFIG_MFD_BCM590XX is not set
-# CONFIG_MFD_BD9571MWV is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_CPCAP is not set
-# CONFIG_MFD_CROS_EC is not set
-# CONFIG_MFD_CS5535 is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9055 is not set
-# CONFIG_MFD_DA9062 is not set
-# CONFIG_MFD_DA9063 is not set
-# CONFIG_MFD_DA9150 is not set
-# CONFIG_MFD_DLN2 is not set
-# CONFIG_MFD_EXYNOS_LPASS is not set
-# CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_KEMPLD is not set
-# CONFIG_MFD_LM3533 is not set
-# CONFIG_MFD_LP3943 is not set
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_MAX14577 is not set
-# CONFIG_MFD_MAX77620 is not set
-# CONFIG_MFD_MAX77686 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX77843 is not set
-# CONFIG_MFD_MAX8907 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_MFD_MC13XXX_I2C is not set
-# CONFIG_MFD_MC13XXX_SPI is not set
-# CONFIG_MFD_MENF21BMC is not set
-# CONFIG_MFD_MT6397 is not set
-# CONFIG_MFD_OMAP_USB_HOST is not set
-# CONFIG_MFD_PALMAS is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_PM8921_CORE is not set
-# CONFIG_MFD_PM8XXX is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_RETU is not set
-# CONFIG_MFD_RK808 is not set
-# CONFIG_MFD_RN5T618 is not set
-# CONFIG_MFD_RT5033 is not set
-# CONFIG_MFD_RTSX_PCI is not set
-# CONFIG_MFD_RTSX_USB is not set
-# CONFIG_MFD_SEC_CORE is not set
-# CONFIG_MFD_SI476X_CORE is not set
-# CONFIG_MFD_SKY81452 is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_SYSCON is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_MFD_TI_AM335X_TSCADC is not set
-# CONFIG_MFD_TI_LMU is not set
-# CONFIG_MFD_TI_LP873X is not set
-# CONFIG_MFD_TI_LP87565 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TPS65086 is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_MFD_TPS65218 is not set
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS65912_SPI is not set
-# CONFIG_MFD_TPS68470 is not set
-# CONFIG_MFD_TPS80031 is not set
-# CONFIG_MFD_VIPERBOARD is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_MICREL_KS8995MA is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MICROCHIP_KSZ is not set
-# CONFIG_MICROCHIP_PHY is not set
-# CONFIG_MICROSEMI_PHY is not set
-# CONFIG_MIGRATION is not set
-CONFIG_MII=y
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_CDMM is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_FPU_EMULATOR is not set
-# CONFIG_MIPS_GENERIC is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_O32_FP64_SUPPORT is not set
-# CONFIG_MIPS_PARAVIRT is not set
-# CONFIG_MIPS_PLATFORM_DEVICES is not set
-# CONFIG_MIPS_SEAD3 is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_MISDN is not set
-# CONFIG_MISDN_AVMFRITZ is not set
-# CONFIG_MISDN_HFCPCI is not set
-# CONFIG_MISDN_HFCUSB is not set
-# CONFIG_MISDN_INFINEON is not set
-# CONFIG_MISDN_NETJET is not set
-# CONFIG_MISDN_SPEEDFAX is not set
-# CONFIG_MISDN_W6692 is not set
-# CONFIG_MKISS is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX5_CORE is not set
-# CONFIG_MLX90614 is not set
-# CONFIG_MLXFW is not set
-# CONFIG_MLXSW_CORE is not set
-# CONFIG_MLX_CPLD_PLATFORM is not set
-# CONFIG_MLX_PLATFORM is not set
-# CONFIG_MMA7455_I2C is not set
-# CONFIG_MMA7455_SPI is not set
-# CONFIG_MMA7660 is not set
-# CONFIG_MMA8452 is not set
-# CONFIG_MMA9551 is not set
-# CONFIG_MMA9553 is not set
-# CONFIG_MMC is not set
-# CONFIG_MMC35240 is not set
-# CONFIG_MMC_ARMMMCI is not set
-# CONFIG_MMC_AU1X is not set
-# CONFIG_MMC_BLOCK is not set
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_MMC_BLOCK_MINORS=8
-# CONFIG_MMC_CAVIUM_THUNDERX is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_MTK is not set
-# CONFIG_MMC_MVSDIO is not set
-# CONFIG_MMC_S3C is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDHCI_ACPI is not set
-# CONFIG_MMC_SDHCI_BCM_KONA is not set
-# CONFIG_MMC_SDHCI_CADENCE is not set
-# CONFIG_MMC_SDHCI_F_SDH30 is not set
-# CONFIG_MMC_SDHCI_IPROC is not set
-# CONFIG_MMC_SDHCI_MSM is not set
-# CONFIG_MMC_SDHCI_OF_ARASAN is not set
-# CONFIG_MMC_SDHCI_OF_AT91 is not set
-# CONFIG_MMC_SDHCI_OF_ESDHC is not set
-# CONFIG_MMC_SDHCI_OF_HLWD is not set
-# CONFIG_MMC_SDHCI_PXAV2 is not set
-# CONFIG_MMC_SDHCI_PXAV3 is not set
-# CONFIG_MMC_SDHCI_XENON is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_TEST is not set
-# CONFIG_MMC_TOSHIBA_PCI is not set
-# CONFIG_MMC_USDHI6ROL0 is not set
-# CONFIG_MMC_USHC is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_MMU=y
-CONFIG_MODULES=y
-# CONFIG_MODULE_COMPRESS is not set
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODULE_SIG is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_MODULE_STRIPPED=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MOST is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_ELAN_I2C is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_PS2_FOCALTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
-# CONFIG_MPL115 is not set
-# CONFIG_MPL115_I2C is not set
-# CONFIG_MPL115_SPI is not set
-# CONFIG_MPL3115 is not set
-# CONFIG_MPLS is not set
-# CONFIG_MPU3050_I2C is not set
-# CONFIG_MQ_IOSCHED_DEADLINE is not set
-# CONFIG_MQ_IOSCHED_KYBER is not set
-# CONFIG_MS5611 is not set
-# CONFIG_MS5637 is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_MSI_LAPTOP is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_LATCH_ADDR is not set
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_LPDDR2_NVM is not set
-# CONFIG_MTD_M25P80 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MCHP23K256 is not set
-# CONFIG_MTD_MT81xx_NOR is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_AMS_DELTA is not set
-# CONFIG_MTD_NAND_AR934X is not set
-# CONFIG_MTD_NAND_AR934X_HW_ECC is not set
-# CONFIG_MTD_NAND_ATMEL is not set
-# CONFIG_MTD_NAND_AU1550 is not set
-# CONFIG_MTD_NAND_BCH is not set
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_BRCMNAND is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_CM_X270 is not set
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_DAVINCI is not set
-# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_DENALI_DT is not set
-# CONFIG_MTD_NAND_DENALI_PCI is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_ECC is not set
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_IFC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_NAND_FSMC is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_GPMI_NAND is not set
-# CONFIG_MTD_NAND_HISI504 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_JZ4740 is not set
-# CONFIG_MTD_NAND_MPC5121_NFC is not set
-# CONFIG_MTD_NAND_MTK is not set
-# CONFIG_MTD_NAND_MXC is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_NDFC is not set
-# CONFIG_MTD_NAND_NUC900 is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
-# CONFIG_MTD_NAND_ORION is not set
-# CONFIG_MTD_NAND_PASEMI is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_RB4XX is not set
-# CONFIG_MTD_NAND_RB750 is not set
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_S3C2410 is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_NAND_SOCRATES is not set
-# CONFIG_MTD_NAND_TMIO is not set
-# CONFIG_MTD_NAND_TXX9NDFMC is not set
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_PARTITIONED_MASTER is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
-# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_ROM is not set
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_SPINAND_MT29F is not set
-# CONFIG_MTD_SPI_NOR is not set
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096
-CONFIG_MTD_SPLIT=y
-# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_EVA_FW is not set
-# CONFIG_MTD_SPLIT_FIRMWARE is not set
-CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
-# CONFIG_MTD_SPLIT_FIT_FW is not set
-# CONFIG_MTD_SPLIT_JIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_LZMA_FW is not set
-# CONFIG_MTD_SPLIT_MINOR_FW is not set
-# CONFIG_MTD_SPLIT_SEAMA_FW is not set
-CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
-CONFIG_MTD_SPLIT_SUPPORT=y
-# CONFIG_MTD_SPLIT_TPLINK_FW is not set
-# CONFIG_MTD_SPLIT_TRX_FW is not set
-# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_WRGG_FW is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SWAP is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_MTD_UIMAGE_SPLIT is not set
-CONFIG_MULTIUSER=y
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_MVMDIO is not set
-# CONFIG_MVNETA_BM is not set
-# CONFIG_MVSW61XX_PHY is not set
-# CONFIG_MVSWITCH_PHY is not set
-# CONFIG_MV_XOR_V2 is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MWL8K is not set
-# CONFIG_MXC4005 is not set
-# CONFIG_MXC6255 is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NAU7802 is not set
-# CONFIG_NBPFAXI_DMA is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NE2000 is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NEC_MARKEINS is not set
-CONFIG_NET=y
-# CONFIG_NETCONSOLE is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETFILTER is not set
-# CONFIG_NETFILTER_ADVANCED is not set
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_INGRESS is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_BPF is not set
-# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETLINK_DIAG is not set
-# CONFIG_NETLINK_MMAP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETROM is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NET_9P is not set
-# CONFIG_NET_ACT_BPF is not set
-# CONFIG_NET_ACT_CSUM is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_IFE is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_SAMPLE is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-# CONFIG_NET_ACT_SKBMOD is not set
-# CONFIG_NET_ACT_TUNNEL_KEY is not set
-# CONFIG_NET_ACT_VLAN is not set
-CONFIG_NET_CADENCE=y
-# CONFIG_NET_CALXEDA_XGMAC is not set
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_BPF is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_FLOWER is not set
-# CONFIG_NET_CLS_FW is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_NET_CLS_MATCHALL is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_U32 is not set
-CONFIG_NET_CORE=y
-# CONFIG_NET_DEVLINK is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_NET_DSA_BCM_SF2 is not set
-# CONFIG_NET_DSA_LOOP is not set
-# CONFIG_NET_DSA_MT7530 is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6171 is not set
-# CONFIG_NET_DSA_MV88E6352 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_QCA8K is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_EMATCH_CANID is not set
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_TEXT is not set
-# CONFIG_NET_EMATCH_U32 is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NET_FOU is not set
-# CONFIG_NET_FOU_IP_TUNNELS is not set
-# CONFIG_NET_IFE is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPVTI is not set
-# CONFIG_NET_IP_TUNNEL is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_KEY_MIGRATE is not set
-# CONFIG_NET_L3_MASTER_DEV is not set
-# CONFIG_NET_MPLS_GSO is not set
-# CONFIG_NET_NCSI is not set
-# CONFIG_NET_NSH is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_NET_PTP_CLASSIFY is not set
-CONFIG_NET_RX_BUSY_POLL=y
-# CONFIG_NET_SB1000 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_ATM is not set
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_CODEL is not set
-# CONFIG_NET_SCH_DEFAULT is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_DSMARK is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_FQ is not set
-CONFIG_NET_SCH_FQ_CODEL=y
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HHF is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_PIE is not set
-# CONFIG_NET_SCH_PLUG is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCTPPROBE is not set
-# CONFIG_NET_SWITCHDEV is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_TEAM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_NET_UDP_TUNNEL is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_NET_VENDOR_8390=y
-CONFIG_NET_VENDOR_ADAPTEC=y
-CONFIG_NET_VENDOR_AGERE=y
-CONFIG_NET_VENDOR_ALACRITECH=y
-CONFIG_NET_VENDOR_ALTEON=y
-CONFIG_NET_VENDOR_AMAZON=y
-CONFIG_NET_VENDOR_AMD=y
-CONFIG_NET_VENDOR_AQUANTIA=y
-CONFIG_NET_VENDOR_ARC=y
-CONFIG_NET_VENDOR_ATHEROS=y
-CONFIG_NET_VENDOR_AURORA=y
-CONFIG_NET_VENDOR_BROADCOM=y
-CONFIG_NET_VENDOR_BROCADE=y
-CONFIG_NET_VENDOR_CAVIUM=y
-CONFIG_NET_VENDOR_CHELSIO=y
-CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_NET_VENDOR_CISCO=y
-CONFIG_NET_VENDOR_DEC=y
-CONFIG_NET_VENDOR_DLINK=y
-CONFIG_NET_VENDOR_EMULEX=y
-CONFIG_NET_VENDOR_EXAR=y
-CONFIG_NET_VENDOR_EZCHIP=y
-CONFIG_NET_VENDOR_FARADAY=y
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_NET_VENDOR_FUJITSU=y
-CONFIG_NET_VENDOR_HISILICON=y
-CONFIG_NET_VENDOR_HP=y
-CONFIG_NET_VENDOR_HUAWEI=y
-CONFIG_NET_VENDOR_I825XX=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_NET_VENDOR_INTEL=y
-CONFIG_NET_VENDOR_MARVELL=y
-CONFIG_NET_VENDOR_MELLANOX=y
-CONFIG_NET_VENDOR_MICREL=y
-CONFIG_NET_VENDOR_MICROCHIP=y
-CONFIG_NET_VENDOR_MYRI=y
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_NETRONOME=y
-CONFIG_NET_VENDOR_NVIDIA=y
-CONFIG_NET_VENDOR_OKI=y
-CONFIG_NET_VENDOR_QLOGIC=y
-CONFIG_NET_VENDOR_QUALCOMM=y
-CONFIG_NET_VENDOR_RDC=y
-CONFIG_NET_VENDOR_REALTEK=y
-CONFIG_NET_VENDOR_RENESAS=y
-CONFIG_NET_VENDOR_ROCKER=y
-CONFIG_NET_VENDOR_SAMSUNG=y
-CONFIG_NET_VENDOR_SEEQ=y
-CONFIG_NET_VENDOR_SILAN=y
-CONFIG_NET_VENDOR_SIS=y
-CONFIG_NET_VENDOR_SMSC=y
-CONFIG_NET_VENDOR_SOLARFLARE=y
-CONFIG_NET_VENDOR_STMICRO=y
-CONFIG_NET_VENDOR_SUN=y
-CONFIG_NET_VENDOR_SYNOPSYS=y
-CONFIG_NET_VENDOR_TEHUTI=y
-CONFIG_NET_VENDOR_TI=y
-CONFIG_NET_VENDOR_TOSHIBA=y
-CONFIG_NET_VENDOR_VIA=y
-CONFIG_NET_VENDOR_WIZNET=y
-CONFIG_NET_VENDOR_XILINX=y
-CONFIG_NET_VENDOR_XIRCOM=y
-# CONFIG_NET_VRF is not set
-# CONFIG_NET_XGENE is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_NFC is not set
-# CONFIG_NFP is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V2_ACL is not set
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFS_ACL_SUPPORT is not set
-CONFIG_NFS_COMMON=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_FSCACHE is not set
-# CONFIG_NFS_SWAP is not set
-# CONFIG_NFS_V2 is not set
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFTL is not set
-# CONFIG_NFT_BRIDGE_META is not set
-# CONFIG_NFT_BRIDGE_REJECT is not set
-# CONFIG_NFT_DUP_IPV4 is not set
-# CONFIG_NFT_DUP_IPV6 is not set
-# CONFIG_NFT_FIB_IPV4 is not set
-# CONFIG_NFT_FIB_IPV6 is not set
-# CONFIG_NFT_FLOW_OFFLOAD is not set
-# CONFIG_NFT_OBJREF is not set
-# CONFIG_NFT_RT is not set
-# CONFIG_NFT_SET_BITMAP is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IPV4 is not set
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-CONFIG_NF_CONNTRACK_PROCFS=y
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CONNTRACK_ZONES is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_GRE is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_DUP_IPV4 is not set
-# CONFIG_NF_DUP_IPV6 is not set
-# CONFIG_NF_FLOW_TABLE is not set
-# CONFIG_NF_LOG_ARP is not set
-# CONFIG_NF_LOG_IPV4 is not set
-# CONFIG_NF_LOG_NETDEV is not set
-# CONFIG_NF_NAT is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_IPV6 is not set
-# CONFIG_NF_NAT_IRC is not set
-# CONFIG_NF_NAT_MASQUERADE_IPV4 is not set
-# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
-# CONFIG_NF_NAT_NEEDED is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_PROTO_GRE is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_REJECT_IPV4 is not set
-# CONFIG_NF_REJECT_IPV6 is not set
-# CONFIG_NF_SOCKET_IPV4 is not set
-# CONFIG_NF_SOCKET_IPV6 is not set
-# CONFIG_NF_TABLES is not set
-# CONFIG_NF_TABLES_NETDEV is not set
-# CONFIG_NI65 is not set
-# CONFIG_NI903X_WDT is not set
-# CONFIG_NIC7018_WDT is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_NIU is not set
-CONFIG_NLATTR=y
-# CONFIG_NLMON is not set
-# CONFIG_NLM_XLP_BOARD is not set
-# CONFIG_NLM_XLR_BOARD is not set
-# CONFIG_NLS is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_MAC_CELTIC is not set
-# CONFIG_NLS_MAC_CENTEURO is not set
-# CONFIG_NLS_MAC_CROATIAN is not set
-# CONFIG_NLS_MAC_CYRILLIC is not set
-# CONFIG_NLS_MAC_GAELIC is not set
-# CONFIG_NLS_MAC_GREEK is not set
-# CONFIG_NLS_MAC_ICELAND is not set
-# CONFIG_NLS_MAC_INUIT is not set
-# CONFIG_NLS_MAC_ROMAN is not set
-# CONFIG_NLS_MAC_ROMANIAN is not set
-# CONFIG_NLS_MAC_TURKISH is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_NMI_LOG_BUF_SHIFT=13
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_NO_BOOTMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_NO_HZ_FULL is not set
-# CONFIG_NO_HZ_IDLE is not set
-# CONFIG_NS83820 is not set
-# CONFIG_NTB is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_NTP_PPS is not set
-# CONFIG_NVM is not set
-# CONFIG_NVMEM is not set
-# CONFIG_NVMEM_IMX_OCOTP is not set
-# CONFIG_NVME_FC is not set
-# CONFIG_NVME_TARGET is not set
-# CONFIG_NVRAM is not set
-# CONFIG_NV_TCO is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_N_GSM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_OBS600 is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_OF_OVERLAY is not set
-# CONFIG_OF_UNITTEST is not set
-# CONFIG_OMAP2_DSS_DEBUG is not set
-# CONFIG_OMAP2_DSS_DEBUGFS is not set
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP_OCP2SCP is not set
-# CONFIG_OMAP_USB2 is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_OPENVSWITCH is not set
-# CONFIG_OPROFILE is not set
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-# CONFIG_OPT3001 is not set
-# CONFIG_ORANGEFS_FS is not set
-# CONFIG_ORION_WATCHDOG is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_OVERLAY_FS=y
-# CONFIG_OVERLAY_FS_INDEX is not set
-# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
-# CONFIG_OWL_LOADER is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_PA12203001 is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_DIAG is not set
-# CONFIG_PAGE_EXTENSION is not set
-# CONFIG_PAGE_OWNER is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PALMAS_GPADC is not set
-# CONFIG_PANASONIC_LAPTOP is not set
-# CONFIG_PANEL is not set
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PANIC_ON_OOPS_VALUE=1
-CONFIG_PANIC_TIMEOUT=1
-# CONFIG_PANTHERLORD_FF is not set
-# CONFIG_PARAVIRT is not set
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARASAN_CF is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IMX is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OCTEON_CF is not set
-# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PC104 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCH_DMA is not set
-# CONFIG_PCH_GBE is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI200SYN is not set
-# CONFIG_PCIEAER_INJECT is not set
-# CONFIG_PCIEASPM is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIE_ALTERA is not set
-# CONFIG_PCIE_ARMADA_8K is not set
-# CONFIG_PCIE_DPC is not set
-# CONFIG_PCIE_DW_PLAT is not set
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIE_IPROC is not set
-# CONFIG_PCIE_KIRIN is not set
-# CONFIG_PCIE_PTM is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
-# CONFIG_PCI_ENDPOINT is not set
-# CONFIG_PCI_ENDPOINT_TEST is not set
-# CONFIG_PCI_FTPCI100 is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI_HISI is not set
-# CONFIG_PCI_HOST_GENERIC is not set
-# CONFIG_PCI_HOST_THUNDER_ECAM is not set
-# CONFIG_PCI_HOST_THUNDER_PEM is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_LAYERSCAPE is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCI_PRI is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_SW_SWITCHTEC is not set
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCI_XGENE is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCNET32 is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PD6729 is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_PERCPU_STATS is not set
-# CONFIG_PERCPU_TEST is not set
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_EVENTS_AMD_POWER is not set
-# CONFIG_PERSISTENT_KEYRINGS is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_PHONET is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-# CONFIG_PHY_CPCAP_USB is not set
-# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
-# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
-# CONFIG_PHY_PXA_28NM_HSIC is not set
-# CONFIG_PHY_PXA_28NM_USB2 is not set
-# CONFIG_PHY_QCOM_DWC3 is not set
-# CONFIG_PHY_SAMSUNG_USB2 is not set
-# CONFIG_PHY_XGENE is not set
-# CONFIG_PI433 is not set
-# CONFIG_PID_IN_CONTEXTIDR is not set
-# CONFIG_PID_NS is not set
-CONFIG_PINCONF=y
-# CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_EXYNOS is not set
-# CONFIG_PINCTRL_EXYNOS5440 is not set
-# CONFIG_PINCTRL_MCP23S08 is not set
-# CONFIG_PINCTRL_MSM8X74 is not set
-CONFIG_PINCTRL_SINGLE=y
-# CONFIG_PINCTRL_SX150X is not set
-CONFIG_PINMUX=y
-# CONFIG_PKCS7_MESSAGE_PARSER is not set
-# CONFIG_PL320_MBOX is not set
-# CONFIG_PL330_DMA is not set
-# CONFIG_PLATFORM_MHU is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_PLIP is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PM is not set
-# CONFIG_PMBUS is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PM_AUTOSLEEP is not set
-# CONFIG_PM_DEVFREQ is not set
-# CONFIG_PM_WAKELOCKS is not set
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_POSIX_TIMERS=y
-# CONFIG_POWERCAP is not set
-# CONFIG_POWER_AVS is not set
-# CONFIG_POWER_RESET is not set
-# CONFIG_POWER_RESET_BRCMKONA is not set
-# CONFIG_POWER_RESET_BRCMSTB is not set
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
-# CONFIG_POWER_RESET_RESTART is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
-# CONFIG_POWER_RESET_VERSATILE is not set
-# CONFIG_POWER_RESET_XGENE is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
-# CONFIG_PPP is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPS is not set
-# CONFIG_PPS_CLIENT_GPIO is not set
-# CONFIG_PPS_CLIENT_KTIMER is not set
-# CONFIG_PPS_CLIENT_LDISC is not set
-# CONFIG_PPS_CLIENT_PARPORT is not set
-# CONFIG_PPS_DEBUG is not set
-# CONFIG_PPTP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_PRINTK=y
-CONFIG_PRINTK_NMI=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
-# CONFIG_PRINTK_TIME is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_PRISM2_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_PROC_CHILDREN is not set
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_PROC_STRIPPED=y
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILING is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_PROVE_RCU is not set
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-# CONFIG_PSAMPLE is not set
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_PSTORE is not set
-# CONFIG_PTP_1588_CLOCK is not set
-# CONFIG_PTP_1588_CLOCK_IXP46X is not set
-# CONFIG_PTP_1588_CLOCK_KVM is not set
-# CONFIG_PTP_1588_CLOCK_PCH is not set
-# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
-# CONFIG_PWM is not set
-# CONFIG_PWM_FSL_FTM is not set
-# CONFIG_PWM_PCA9685 is not set
-CONFIG_PWRSEQ_EMMC=y
-# CONFIG_PWRSEQ_SD8787 is not set
-CONFIG_PWRSEQ_SIMPLE=y
-# CONFIG_QCA7000 is not set
-# CONFIG_QCA7000_SPI is not set
-# CONFIG_QCA7000_UART is not set
-# CONFIG_QCOM_EMAC is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
-# CONFIG_QCOM_HIDMA is not set
-# CONFIG_QCOM_HIDMA_MGMT is not set
-# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
-# CONFIG_QCOM_SPMI_IADC is not set
-# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
-# CONFIG_QCOM_SPMI_VADC is not set
-# CONFIG_QED is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX6FS_FS is not set
-# CONFIG_QORIQ_CPUFREQ is not set
-# CONFIG_QORIQ_THERMAL is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_QUEUED_LOCK_STAT is not set
-# CONFIG_QUOTA is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_QUOTA_DEBUG is not set
-# CONFIG_R3964 is not set
-# CONFIG_R6040 is not set
-# CONFIG_R8169 is not set
-# CONFIG_R8188EU is not set
-# CONFIG_R8712U is not set
-# CONFIG_R8723AU is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_RALINK is not set
-# CONFIG_RANDOM32_SELFTEST is not set
-# CONFIG_RAPIDIO is not set
-# CONFIG_RAS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_RBTREE_TEST is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-# CONFIG_RCU_EQS_DEBUG is not set
-# CONFIG_RCU_EXPEDITE_BOOT is not set
-CONFIG_RCU_EXPERT=y
-CONFIG_RCU_FANOUT=32
-CONFIG_RCU_FANOUT_LEAF=16
-# CONFIG_RCU_FAST_NO_HZ is not set
-CONFIG_RCU_KTHREAD_PRIO=0
-# CONFIG_RCU_NOCB_CPU is not set
-# CONFIG_RCU_PERF_TEST is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RC_ATI_REMOTE is not set
-# CONFIG_RC_CORE is not set
-# CONFIG_RC_DECODERS is not set
-# CONFIG_RC_LOOPBACK is not set
-# CONFIG_RC_MAP is not set
-# CONFIG_RDS is not set
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_GZIP is not set
-# CONFIG_RD_LZ4 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_READABLE_ASM is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_REFCOUNT_FULL is not set
-# CONFIG_REGMAP is not set
-# CONFIG_REGMAP_I2C is not set
-# CONFIG_REGMAP_MMIO is not set
-# CONFIG_REGMAP_SPI is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_ACT8865 is not set
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_ANATOP is not set
-# CONFIG_REGULATOR_DA9210 is not set
-# CONFIG_REGULATOR_DA9211 is not set
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FAN53555 is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_GPIO is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_ISL9305 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-# CONFIG_REGULATOR_LP8755 is not set
-# CONFIG_REGULATOR_LTC3589 is not set
-# CONFIG_REGULATOR_LTC3676 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_MT6311 is not set
-# CONFIG_REGULATOR_PFUZE100 is not set
-# CONFIG_REGULATOR_PV88060 is not set
-# CONFIG_REGULATOR_PV88080 is not set
-# CONFIG_REGULATOR_PV88090 is not set
-# CONFIG_REGULATOR_PWM is not set
-# CONFIG_REGULATOR_TI_ABB is not set
-# CONFIG_REGULATOR_TPS51632 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS65132 is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_VCTRL is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_RELAY is not set
-# CONFIG_RELOCATABLE is not set
-# CONFIG_REMOTEPROC is not set
-# CONFIG_RESET_ATH79 is not set
-# CONFIG_RESET_BERLIN is not set
-# CONFIG_RESET_CONTROLLER is not set
-# CONFIG_RESET_IMX7 is not set
-# CONFIG_RESET_LANTIQ is not set
-# CONFIG_RESET_LPC18XX is not set
-# CONFIG_RESET_MESON is not set
-# CONFIG_RESET_PISTACHIO is not set
-# CONFIG_RESET_SOCFPGA is not set
-# CONFIG_RESET_STM32 is not set
-# CONFIG_RESET_SUNXI is not set
-# CONFIG_RESET_TEGRA_BPMP is not set
-# CONFIG_RESET_TI_SYSCON is not set
-# CONFIG_RESET_ZYNQ is not set
-# CONFIG_RFD_FTL is not set
-CONFIG_RFKILL=y
-# CONFIG_RFKILL_FULL is not set
-# CONFIG_RFKILL_GPIO is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL_LEDS is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_RING_BUFFER_STARTUP_TEST is not set
-# CONFIG_RMI4_CORE is not set
-# CONFIG_RMNET is not set
-# CONFIG_ROCKCHIP_PHY is not set
-# CONFIG_ROCKER is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_ROSE is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
-# CONFIG_RPR0521 is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_RTC_DEBUG is not set
-# CONFIG_RTC_DRV_ABB5ZES3 is not set
-# CONFIG_RTC_DRV_ABX80X is not set
-# CONFIG_RTC_DRV_ARMADA38X is not set
-# CONFIG_RTC_DRV_AU1XXX is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1302 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1307_CENTURY is not set
-# CONFIG_RTC_DRV_DS1307_HWMON is not set
-# CONFIG_RTC_DRV_DS1343 is not set
-# CONFIG_RTC_DRV_DS1347 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1685_FAMILY is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_DS2404 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_EP93XX is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_FTRTC010 is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
-# CONFIG_RTC_DRV_HYM8563 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_ISL12057 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_MAX6916 is not set
-# CONFIG_RTC_DRV_MCP795 is not set
-# CONFIG_RTC_DRV_MOXART is not set
-# CONFIG_RTC_DRV_MPC5121 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_OMAP is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-# CONFIG_RTC_DRV_PCF2127 is not set
-# CONFIG_RTC_DRV_PCF85063 is not set
-# CONFIG_RTC_DRV_PCF8523 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_PS3 is not set
-# CONFIG_RTC_DRV_PT7C4338 is not set
-# CONFIG_RTC_DRV_R7301 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_RTC7301 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-# CONFIG_RTC_DRV_RV8803 is not set
-# CONFIG_RTC_DRV_RX4581 is not set
-# CONFIG_RTC_DRV_RX6110 is not set
-# CONFIG_RTC_DRV_RX8010 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_SNVS is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_SUN6I is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_XGENE is not set
-# CONFIG_RTC_DRV_ZYNQMP is not set
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_NVMEM is not set
-CONFIG_RTC_SYSTOHC=y
-CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366RB_PHY is not set
-# CONFIG_RTL8366S_PHY is not set
-# CONFIG_RTL8366_SMI is not set
-# CONFIG_RTL8366_SMI_DEBUG_FS is not set
-# CONFIG_RTL8367B_PHY is not set
-# CONFIG_RTL8367_PHY is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_RTL_CARDS is not set
-# CONFIG_RTS5208 is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_RUNTIME_DEBUG is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_RXKAD=y
-# CONFIG_S2IO is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SAMSUNG_LAPTOP is not set
-# CONFIG_SATA_ACARD_AHCI is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_SATA_DWC is not set
-# CONFIG_SATA_FSL is not set
-# CONFIG_SATA_HIGHBANK is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_RCAR is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SBC_FITPC2_WATCHDOG is not set
-CONFIG_SBITMAP=y
-# CONFIG_SC92031 is not set
-# CONFIG_SCA3000 is not set
-# CONFIG_SCACHE_DEBUGFS is not set
-# CONFIG_SCC is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_AUTOGROUP is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_MC is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCHED_SMT is not set
-# CONFIG_SCHED_STACK_END_CHECK is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_SCR24X is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_BNX2X_FCOE is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CHELSIO_FCOE is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_ESAS2R is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_HISI_SAS is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_ISCI is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_LPFC is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_MPT3SAS is not set
-# CONFIG_SCSI_MQ_DEFAULT is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-# CONFIG_SCSI_MVUMI is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_PMCRAID is not set
-CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_SMARTPQI is not set
-# CONFIG_SCSI_SNIC is not set
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_UFSHCD is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_VIRTIO is not set
-# CONFIG_SCSI_WD719X is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SECCOMP is not set
-CONFIG_SECTION_MISMATCH_WARN_ONLY=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_DMESG_RESTRICT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_ACPI_POWER is not set
-# CONFIG_SENSORS_AD7314 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADC128D818 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADS1015 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_ADT7310 is not set
-# CONFIG_SENSORS_ADT7410 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ASPEED is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_DELL_SMM is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_DS620 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_EMC2103 is not set
-# CONFIG_SENSORS_EMC6W201 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FAM15H_POWER is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_FTSTEUTATES is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_G762 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_GPIO_FAN is not set
-# CONFIG_SENSORS_GSC is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_HIH6130 is not set
-# CONFIG_SENSORS_HMC5843 is not set
-# CONFIG_SENSORS_HMC5843_I2C is not set
-# CONFIG_SENSORS_HMC5843_SPI is not set
-# CONFIG_SENSORS_HTU21 is not set
-# CONFIG_SENSORS_I5500 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_IIO_HWMON is not set
-# CONFIG_SENSORS_INA209 is not set
-# CONFIG_SENSORS_INA2XX is not set
-# CONFIG_SENSORS_INA3221 is not set
-# CONFIG_SENSORS_ISL29018 is not set
-# CONFIG_SENSORS_ISL29028 is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_JC42 is not set
-# CONFIG_SENSORS_K10TEMP is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_LINEAGE is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LM95234 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_LM95245 is not set
-# CONFIG_SENSORS_LTC2945 is not set
-# CONFIG_SENSORS_LTC2990 is not set
-# CONFIG_SENSORS_LTC4151 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4222 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LTC4260 is not set
-# CONFIG_SENSORS_LTC4261 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX16065 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX1668 is not set
-# CONFIG_SENSORS_MAX197 is not set
-# CONFIG_SENSORS_MAX31722 is not set
-# CONFIG_SENSORS_MAX31790 is not set
-# CONFIG_SENSORS_MAX6639 is not set
-# CONFIG_SENSORS_MAX6642 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_MAX6697 is not set
-# CONFIG_SENSORS_MCP3021 is not set
-# CONFIG_SENSORS_NCT6683 is not set
-# CONFIG_SENSORS_NCT6775 is not set
-# CONFIG_SENSORS_NCT7802 is not set
-# CONFIG_SENSORS_NCT7904 is not set
-# CONFIG_SENSORS_NSA320 is not set
-# CONFIG_SENSORS_NTC_THERMISTOR is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_POWR1220 is not set
-# CONFIG_SENSORS_PWM_FAN is not set
-# CONFIG_SENSORS_SCH5627 is not set
-# CONFIG_SENSORS_SCH5636 is not set
-# CONFIG_SENSORS_SCH56XX_COMMON is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SHT21 is not set
-# CONFIG_SENSORS_SHT3x is not set
-# CONFIG_SENSORS_SHTC1 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMM665 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_STTS751 is not set
-# CONFIG_SENSORS_TC654 is not set
-# CONFIG_SENSORS_TC74 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP103 is not set
-# CONFIG_SENSORS_TMP108 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_TSL2563 is not set
-# CONFIG_SENSORS_VEXPRESS is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VIA_CPUTEMP is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83795 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_XGENE is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_ASPEED_VUART is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_DMA=y
-# CONFIG_SERIAL_8250_DW is not set
-# CONFIG_SERIAL_8250_EM is not set
-# CONFIG_SERIAL_8250_EXAR is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_FINTEK is not set
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
-# CONFIG_SERIAL_8250_INGENIC is not set
-# CONFIG_SERIAL_8250_LPSS is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_MID is not set
-# CONFIG_SERIAL_8250_MOXA is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_RSA is not set
-# CONFIG_SERIAL_8250_RT288X is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_ARC is not set
-# CONFIG_SERIAL_BCM63XX is not set
-# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_DEV_BUS is not set
-CONFIG_SERIAL_EARLYCON=y
-# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
-# CONFIG_SERIAL_FSL_LPUART is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_RP2 is not set
-# CONFIG_SERIAL_SC16IS7XX is not set
-# CONFIG_SERIAL_SCCNXP is not set
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_STM32 is not set
-# CONFIG_SERIAL_ST_ASC is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_UARTLITE is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_APBPS2 is not set
-# CONFIG_SERIO_ARC_PS2 is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_GPIO_PS2 is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_SUN4I_PS2 is not set
-# CONFIG_SFC is not set
-# CONFIG_SFC_FALCON is not set
-# CONFIG_SFI is not set
-# CONFIG_SGETMASK_SYSCALL is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SG_POOL is not set
-# CONFIG_SG_SPLIT is not set
-CONFIG_SHMEM=y
-# CONFIG_SH_ETH is not set
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_SH_TIMER_MTU2 is not set
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SI1145 is not set
-# CONFIG_SI7005 is not set
-# CONFIG_SI7020 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SIGNALFD=y
-# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_SIMPLE_PM_BUS is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLABINFO=y
-# CONFIG_SLAB_FREELIST_HARDENED is not set
-# CONFIG_SLAB_FREELIST_RANDOM is not set
-CONFIG_SLAB_MERGE_DEFAULT=y
-# CONFIG_SLHC is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_SLIP is not set
-# CONFIG_SLOB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_CPU_PARTIAL=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_SMARTJOYPLUS_FF is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMC9194 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMP is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_SND is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALOOP is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_ASIHPI is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-# CONFIG_SND_ATMEL_SOC is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AUDIO_GRAPH_CARD is not set
-# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BCD2000 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_DESIGNWARE_I2S is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EDMA_SOC is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FIREWIRE is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_HDA_INTEL is not set
-CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
-CONFIG_SND_HDA_PREALLOC_SIZE=64
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_HWDEP is not set
-# CONFIG_SND_I2S_HI6210_I2S is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_ISA is not set
-# CONFIG_SND_KIRKWOOD_SOC is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_LOLA is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_MXS_SOC is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_OXYGEN is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_PCM is not set
-# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_PCM_OSS is not set
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCM_TIMER is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-# CONFIG_SND_POWERPC_SOC is not set
-# CONFIG_SND_PPC is not set
-CONFIG_SND_PROC_FS=y
-# CONFIG_SND_RAWMIDI is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_SE6X is not set
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SIMPLE_CARD is not set
-# CONFIG_SND_SIMPLE_SCU_CARD is not set
-# CONFIG_SND_SIS7019 is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_ADAU1701 is not set
-# CONFIG_SND_SOC_ADAU1761_I2C is not set
-# CONFIG_SND_SOC_ADAU1761_SPI is not set
-# CONFIG_SND_SOC_ADAU7002 is not set
-# CONFIG_SND_SOC_AK4104 is not set
-# CONFIG_SND_SOC_AK4554 is not set
-# CONFIG_SND_SOC_AK4613 is not set
-# CONFIG_SND_SOC_AK4642 is not set
-# CONFIG_SND_SOC_AK5386 is not set
-# CONFIG_SND_SOC_ALC5623 is not set
-# CONFIG_SND_SOC_AMD_ACP is not set
-# CONFIG_SND_SOC_AU1XAUDIO is not set
-# CONFIG_SND_SOC_AU1XPSC is not set
-# CONFIG_SND_SOC_BT_SCO is not set
-# CONFIG_SND_SOC_CS35L32 is not set
-# CONFIG_SND_SOC_CS35L33 is not set
-# CONFIG_SND_SOC_CS35L34 is not set
-# CONFIG_SND_SOC_CS35L35 is not set
-# CONFIG_SND_SOC_CS4265 is not set
-# CONFIG_SND_SOC_CS4270 is not set
-# CONFIG_SND_SOC_CS4271 is not set
-# CONFIG_SND_SOC_CS4271_I2C is not set
-# CONFIG_SND_SOC_CS4271_SPI is not set
-# CONFIG_SND_SOC_CS42L42 is not set
-# CONFIG_SND_SOC_CS42L51_I2C is not set
-# CONFIG_SND_SOC_CS42L52 is not set
-# CONFIG_SND_SOC_CS42L56 is not set
-# CONFIG_SND_SOC_CS42L73 is not set
-# CONFIG_SND_SOC_CS42XX8_I2C is not set
-# CONFIG_SND_SOC_CS43130 is not set
-# CONFIG_SND_SOC_CS4349 is not set
-# CONFIG_SND_SOC_CS53L30 is not set
-# CONFIG_SND_SOC_DIO2125 is not set
-# CONFIG_SND_SOC_ES7134 is not set
-# CONFIG_SND_SOC_ES8316 is not set
-# CONFIG_SND_SOC_ES8328 is not set
-# CONFIG_SND_SOC_ES8328_I2C is not set
-# CONFIG_SND_SOC_ES8328_SPI is not set
-# CONFIG_SND_SOC_EUKREA_TLV320 is not set
-# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
-# CONFIG_SND_SOC_FSL_ASRC is not set
-# CONFIG_SND_SOC_FSL_ESAI is not set
-# CONFIG_SND_SOC_FSL_SAI is not set
-# CONFIG_SND_SOC_FSL_SPDIF is not set
-# CONFIG_SND_SOC_FSL_SSI is not set
-# CONFIG_SND_SOC_GTM601 is not set
-# CONFIG_SND_SOC_IMG is not set
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-# CONFIG_SND_SOC_IMX_ES8328 is not set
-# CONFIG_SND_SOC_IMX_SPDIF is not set
-# CONFIG_SND_SOC_IMX_WM8962 is not set
-# CONFIG_SND_SOC_INNO_RK3036 is not set
-# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
-# CONFIG_SND_SOC_INTEL_SST is not set
-# CONFIG_SND_SOC_MAX98504 is not set
-# CONFIG_SND_SOC_MAX9860 is not set
-# CONFIG_SND_SOC_MAX98927 is not set
-# CONFIG_SND_SOC_MEDIATEK is not set
-# CONFIG_SND_SOC_MPC5200_AC97 is not set
-# CONFIG_SND_SOC_MPC5200_I2S is not set
-# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
-# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
-# CONFIG_SND_SOC_MT2701 is not set
-# CONFIG_SND_SOC_MT8173 is not set
-# CONFIG_SND_SOC_NAU8540 is not set
-# CONFIG_SND_SOC_NAU8810 is not set
-# CONFIG_SND_SOC_NAU8824 is not set
-# CONFIG_SND_SOC_PCM1681 is not set
-# CONFIG_SND_SOC_PCM1792A is not set
-# CONFIG_SND_SOC_PCM179X_I2C is not set
-# CONFIG_SND_SOC_PCM179X_SPI is not set
-# CONFIG_SND_SOC_PCM3168A_I2C is not set
-# CONFIG_SND_SOC_PCM3168A_SPI is not set
-# CONFIG_SND_SOC_PCM512x_I2C is not set
-# CONFIG_SND_SOC_PCM512x_SPI is not set
-# CONFIG_SND_SOC_QCOM is not set
-# CONFIG_SND_SOC_RT5616 is not set
-# CONFIG_SND_SOC_RT5631 is not set
-# CONFIG_SND_SOC_RT5677_SPI is not set
-# CONFIG_SND_SOC_SGTL5000 is not set
-# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
-# CONFIG_SND_SOC_SPDIF is not set
-# CONFIG_SND_SOC_SSM2602_I2C is not set
-# CONFIG_SND_SOC_SSM2602_SPI is not set
-# CONFIG_SND_SOC_SSM4567 is not set
-# CONFIG_SND_SOC_STA32X is not set
-# CONFIG_SND_SOC_STA350 is not set
-# CONFIG_SND_SOC_STI_SAS is not set
-# CONFIG_SND_SOC_TAS2552 is not set
-# CONFIG_SND_SOC_TAS5086 is not set
-# CONFIG_SND_SOC_TAS571X is not set
-# CONFIG_SND_SOC_TAS5720 is not set
-# CONFIG_SND_SOC_TFA9879 is not set
-# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC31XX is not set
-# CONFIG_SND_SOC_TLV320AIC3X is not set
-# CONFIG_SND_SOC_TPA6130A2 is not set
-# CONFIG_SND_SOC_TS3A227E is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8523 is not set
-# CONFIG_SND_SOC_WM8524 is not set
-# CONFIG_SND_SOC_WM8580 is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8728 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8737 is not set
-# CONFIG_SND_SOC_WM8741 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8770 is not set
-# CONFIG_SND_SOC_WM8776 is not set
-# CONFIG_SND_SOC_WM8804_I2C is not set
-# CONFIG_SND_SOC_WM8804_SPI is not set
-# CONFIG_SND_SOC_WM8903 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8962 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8978 is not set
-# CONFIG_SND_SOC_WM8985 is not set
-# CONFIG_SND_SOC_XTFPGA_I2S is not set
-# CONFIG_SND_SOC_ZX_AUD96P22 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_SUN4I_CODEC is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_TIMER is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_6FIRE is not set
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_HIFACE is not set
-# CONFIG_SND_USB_POD is not set
-# CONFIG_SND_USB_PODHD is not set
-# CONFIG_SND_USB_TONEPORT is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_US122L is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_VARIAX is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_WAVEFRONT is not set
-CONFIG_SND_X86=y
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_SOCK_CGROUP_DATA is not set
-# CONFIG_SOC_AM33XX is not set
-# CONFIG_SOC_AM43XX is not set
-# CONFIG_SOC_BRCMSTB is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_SOC_DRA7XX is not set
-# CONFIG_SOC_HAS_OMAP2_SDRC is not set
-# CONFIG_SOC_OMAP5 is not set
-# CONFIG_SOC_TI is not set
-# CONFIG_SOFTLOCKUP_DETECTOR is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_SONYPI is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_SOUND is not set
-# CONFIG_SOUND_OSS_CORE is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_SP5100_TCO is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-# CONFIG_SPARSE_IRQ is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_SPEAKUP is not set
-# CONFIG_SPI is not set
-# CONFIG_SPINLOCK_TEST is not set
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_AU1550 is not set
-# CONFIG_SPI_AXI_SPI_ENGINE is not set
-# CONFIG_SPI_BCM2835 is not set
-# CONFIG_SPI_BCM_QSPI is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_CADENCE is not set
-# CONFIG_SPI_CADENCE_QUADSPI is not set
-# CONFIG_SPI_DEBUG is not set
-# CONFIG_SPI_DESIGNWARE is not set
-# CONFIG_SPI_FSL_DSPI is not set
-# CONFIG_SPI_FSL_ESPI is not set
-# CONFIG_SPI_FSL_SPI is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_GPIO_OLD is not set
-# CONFIG_SPI_IMG_SPFI is not set
-# CONFIG_SPI_LM70_LLP is not set
-# CONFIG_SPI_LOOPBACK_TEST is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_SPI_MPC52xx is not set
-# CONFIG_SPI_MPC52xx_PSC is not set
-# CONFIG_SPI_OCTEON is not set
-# CONFIG_SPI_OC_TINY is not set
-# CONFIG_SPI_ORION is not set
-# CONFIG_SPI_PL022 is not set
-# CONFIG_SPI_PPC4xx is not set
-# CONFIG_SPI_PXA2XX is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_ROCKCHIP is not set
-# CONFIG_SPI_SC18IS602 is not set
-# CONFIG_SPI_SLAVE is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_THUNDERX is not set
-# CONFIG_SPI_TI_QSPI is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XCOMM is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_XWAY is not set
-# CONFIG_SPI_ZYNQMP_GQSPI is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SPMI is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
-# CONFIG_SQUASHFS_DECOMP_MULTI is not set
-CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
-# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
-# CONFIG_SQUASHFS_EMBEDDED is not set
-# CONFIG_SQUASHFS_FILE_CACHE is not set
-CONFIG_SQUASHFS_FILE_DIRECT=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_LZ4 is not set
-# CONFIG_SQUASHFS_LZO is not set
-# CONFIG_SQUASHFS_XATTR is not set
-CONFIG_SQUASHFS_XZ=y
-# CONFIG_SQUASHFS_ZLIB is not set
-# CONFIG_SQUASHFS_ZSTD is not set
-# CONFIG_SRAM is not set
-# CONFIG_SRF04 is not set
-# CONFIG_SRF08 is not set
-# CONFIG_SSB is not set
-# CONFIG_SSB_DEBUG is not set
-# CONFIG_SSB_DRIVER_GPIO is not set
-# CONFIG_SSB_HOST_SOC is not set
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSFDC is not set
-# CONFIG_STACKTRACE is not set
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_STACK_TRACER is not set
-# CONFIG_STACK_VALIDATION is not set
-CONFIG_STAGING=y
-# CONFIG_STAGING_BOARD is not set
-# CONFIG_STAGING_MEDIA is not set
-CONFIG_STANDALONE=y
-# CONFIG_STATIC_KEYS_SELFTEST is not set
-# CONFIG_STATIC_USERMODEHELPER is not set
-CONFIG_STDBINUTILS=y
-# CONFIG_STE10XP is not set
-# CONFIG_STE_MODEM_RPROC is not set
-# CONFIG_STK3310 is not set
-# CONFIG_STK8312 is not set
-# CONFIG_STK8BA50 is not set
-# CONFIG_STM is not set
-# CONFIG_STMMAC_ETH is not set
-# CONFIG_STMMAC_PCI is not set
-# CONFIG_STMMAC_PLATFORM is not set
-# CONFIG_STM_DUMMY is not set
-# CONFIG_STM_SOURCE_CONSOLE is not set
-CONFIG_STP=y
-# CONFIG_STREAM_PARSER is not set
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_STRICT_MODULE_RWX=y
-# CONFIG_STRING_SELFTEST is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_STX104 is not set
-# CONFIG_SUN4I_GPADC is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_SUNRPC_DEBUG is not set
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SUNXI_SRAM is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_SURFACE_3_BUTTON is not set
-# CONFIG_SUSPEND is not set
-# CONFIG_SUSPEND_SKIP_SYNC is not set
-CONFIG_SWAP=y
-# CONFIG_SWCONFIG is not set
-# CONFIG_SWCONFIG_B53 is not set
-# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
-# CONFIG_SWCONFIG_LEDS is not set
-# CONFIG_SW_SYNC is not set
-# CONFIG_SX9500 is not set
-# CONFIG_SXGBE_ETH is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_SYNC_FILE is not set
-# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_SYSCON_REBOOT_MODE is not set
-CONFIG_SYSCTL=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SYSFS=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_SYSTEMPORT is not set
-# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
-# CONFIG_SYSTEM_DATA_VERIFICATION is not set
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
-CONFIG_SYSTEM_TRUSTED_KEYS=""
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_T5403 is not set
-# CONFIG_TARGET_CORE is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_TASKS_RCU is not set
-# CONFIG_TASK_XACCT is not set
-# CONFIG_TC35815 is not set
-# CONFIG_TCG_ATMEL is not set
-# CONFIG_TCG_CRB is not set
-# CONFIG_TCG_INFINEON is not set
-# CONFIG_TCG_NSC is not set
-# CONFIG_TCG_ST33_I2C is not set
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_TIS_I2C_ATMEL is not set
-# CONFIG_TCG_TIS_I2C_INFINEON is not set
-# CONFIG_TCG_TIS_I2C_NUVOTON is not set
-# CONFIG_TCG_TIS_SPI is not set
-# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
-# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TCG_VTPM_PROXY is not set
-# CONFIG_TCG_XEN is not set
-# CONFIG_TCIC is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BBR is not set
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CDG is not set
-CONFIG_TCP_CONG_CUBIC=y
-# CONFIG_TCP_CONG_DCTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_NV is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_WESTWOOD is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_TCS3414 is not set
-# CONFIG_TCS3472 is not set
-# CONFIG_TEE is not set
-# CONFIG_TEGRA_AHB is not set
-# CONFIG_TEGRA_HOST1X is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TERANETICS_PHY is not set
-# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
-# CONFIG_TEST_BITMAP is not set
-# CONFIG_TEST_BPF is not set
-# CONFIG_TEST_FIRMWARE is not set
-# CONFIG_TEST_HASH is not set
-# CONFIG_TEST_HEXDUMP is not set
-# CONFIG_TEST_KMOD is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_LKM is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_TEST_PRINTF is not set
-# CONFIG_TEST_RHASHTABLE is not set
-# CONFIG_TEST_SORT is not set
-# CONFIG_TEST_STATIC_KEYS is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_SYSCTL is not set
-# CONFIG_TEST_UDELAY is not set
-# CONFIG_TEST_USER_COPY is not set
-# CONFIG_TEST_UUID is not set
-CONFIG_TEXTSEARCH=y
-# CONFIG_TEXTSEARCH_BM is not set
-# CONFIG_TEXTSEARCH_FSM is not set
-# CONFIG_TEXTSEARCH_KMP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_EMULATION is not set
-# CONFIG_THERMAL_GOV_BANG_BANG is not set
-# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_THERMAL_WRITABLE_TRIPS is not set
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_THUNDERBOLT is not set
-# CONFIG_THUNDER_NIC_BGX is not set
-# CONFIG_THUNDER_NIC_PF is not set
-# CONFIG_THUNDER_NIC_RGX is not set
-# CONFIG_THUNDER_NIC_VF is not set
-# CONFIG_TICK_CPU_ACCOUNTING is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_TIMB_DMA is not set
-CONFIG_TIMERFD=y
-# CONFIG_TIMER_STATS is not set
-CONFIG_TINY_RCU=y
-# CONFIG_TIPC is not set
-# CONFIG_TI_ADC081C is not set
-# CONFIG_TI_ADC0832 is not set
-# CONFIG_TI_ADC084S021 is not set
-# CONFIG_TI_ADC108S102 is not set
-# CONFIG_TI_ADC12138 is not set
-# CONFIG_TI_ADC128S052 is not set
-# CONFIG_TI_ADC161S626 is not set
-# CONFIG_TI_ADS1015 is not set
-# CONFIG_TI_ADS7950 is not set
-# CONFIG_TI_ADS8688 is not set
-# CONFIG_TI_AM335X_ADC is not set
-# CONFIG_TI_CPSW is not set
-# CONFIG_TI_CPSW_ALE is not set
-# CONFIG_TI_CPTS is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_TI_DAVINCI_CPDMA is not set
-# CONFIG_TI_DAVINCI_MDIO is not set
-# CONFIG_TI_ST is not set
-# CONFIG_TI_SYSCON_RESET is not set
-# CONFIG_TI_TLC4541 is not set
-# CONFIG_TLAN is not set
-# CONFIG_TLS is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TMP006 is not set
-# CONFIG_TMP007 is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TORTURE_TEST is not set
-# CONFIG_TOSHIBA_HAPS is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
-# CONFIG_TOUCHSCREEN_EKTF2127 is not set
-# CONFIG_TOUCHSCREEN_ELAN is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_FT6236 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GOODIX is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_ILI210X is not set
-# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_MMS114 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_RM_TS is not set
-# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_SILEAD is not set
-# CONFIG_TOUCHSCREEN_SIS_I2C is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_STMFTS is not set
-# CONFIG_TOUCHSCREEN_SUR40 is not set
-# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
-# CONFIG_TOUCHSCREEN_SX8654 is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-# CONFIG_TOUCHSCREEN_TSC2004 is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_ZET6223 is not set
-# CONFIG_TOUCHSCREEN_ZFORCE is not set
-# CONFIG_TPL0102 is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_TRACEPOINT_BENCHMARK is not set
-# CONFIG_TRACER_SNAPSHOT is not set
-# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_TRACE_EVAL_MAP_FILE is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_TRACE_SINK is not set
-# CONFIG_TRACING_EVENTS_GPIO is not set
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_TRIM_UNUSED_KSYMS is not set
-# CONFIG_TRUSTED_KEYS is not set
-# CONFIG_TSL2583 is not set
-# CONFIG_TSL2x7x is not set
-# CONFIG_TSL4531 is not set
-# CONFIG_TSYS01 is not set
-# CONFIG_TSYS02D is not set
-# CONFIG_TTPCI_EEPROM is not set
-CONFIG_TTY=y
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_TUN is not set
-# CONFIG_TUN_VNET_CROSS_LE is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL6030_GPADC is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_TYPEC_TCPM is not set
-# CONFIG_TYPEC_UCSI is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_UBIFS_ATIME_SUPPORT is not set
-# CONFIG_UBIFS_FS_ENCRYPTION is not set
-CONFIG_UBIFS_FS_FORMAT4=y
-# CONFIG_UBIFS_FS_SECURITY is not set
-# CONFIG_UBSAN is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_UCSI is not set
-# CONFIG_UDF_FS is not set
-CONFIG_UDF_NLS=y
-CONFIG_UEVENT_HELPER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_UFS_FS is not set
-# CONFIG_UHID is not set
-CONFIG_UID16=y
-# CONFIG_UIO is not set
-# CONFIG_ULTRA is not set
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_UNIX=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_UNIX_DIAG is not set
-# CONFIG_UNMAP_KERNEL_AT_EL0 is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_UPROBES is not set
-# CONFIG_UPROBE_EVENT is not set
-# CONFIG_US5182D is not set
-# CONFIG_USB is not set
-# CONFIG_USBIP_CORE is not set
-CONFIG_USBIP_VHCI_HC_PORTS=8
-CONFIG_USBIP_VHCI_NR_HCS=1
-# CONFIG_USBIP_VUDC is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AMD5536UDC is not set
-CONFIG_USB_AN2720=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_BDC_UDC is not set
-CONFIG_USB_BELKIN=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_CHAOSKEY is not set
-# CONFIG_USB_CHIPIDEA is not set
-# CONFIG_USB_CONFIGFS is not set
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-CONFIG_USB_DEFAULT_PERSIST=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_DWC2 is not set
-# CONFIG_USB_DWC2_DEBUG is not set
-# CONFIG_USB_DWC2_DUAL_ROLE is not set
-# CONFIG_USB_DWC2_HOST is not set
-# CONFIG_USB_DWC2_PERIPHERAL is not set
-# CONFIG_USB_DWC3 is not set
-# CONFIG_USB_DWC3_EXYNOS is not set
-# CONFIG_USB_DWC3_KEYSTONE is not set
-# CONFIG_USB_DWC3_OF_SIMPLE is not set
-# CONFIG_USB_DWC3_PCI is not set
-# CONFIG_USB_DWC3_QCOM is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_EHCI_ATH79 is not set
-# CONFIG_USB_EHCI_HCD_AT91 is not set
-# CONFIG_USB_EHCI_HCD_OMAP is not set
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_EHCI_MSM is not set
-# CONFIG_USB_EHCI_MV is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHSET_TEST_FIXTURE is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_EZUSB_FX2 is not set
-# CONFIG_USB_FOTG210_HCD is not set
-# CONFIG_USB_FOTG210_UDC is not set
-# CONFIG_USB_FSL_USB2 is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_VBUS_DRAW=2
-# CONFIG_USB_GADGET_XILINX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_GR_UDC is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_DTCS033 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_JL2005BCD is not set
-# CONFIG_USB_GSPCA_KINECT is not set
-# CONFIG_USB_GSPCA_KONICA is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_NW80X is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SE401 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA1528 is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_SQ930X is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STK1135 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TOPRO is not set
-# CONFIG_USB_GSPCA_TOUPTEK is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_VICAM is not set
-# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_G_WEBCAM is not set
-# CONFIG_USB_HCD_TEST_MODE is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_HSIC_USB3503 is not set
-# CONFIG_USB_HSIC_USB4604 is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1301 is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_ISP1760 is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_LAN78XX is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
-# CONFIG_USB_LED_TRIG is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LINK_LAYER_TEST is not set
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_MAX3421_HCD is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_MSM_OTG is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_MXS_PHY is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_NET_AX88179_178A is not set
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_CDC_MBIM is not set
-# CONFIG_USB_NET_CDC_NCM is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_CH9200 is not set
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_DRIVERS is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_SR9700 is not set
-# CONFIG_USB_NET_SR9800 is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD_PCI is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG_FSM is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_PCI is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PHY is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_PXA27X is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_RCAR_PHY is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_RTL8152 is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_F81232 is not set
-# CONFIG_USB_SERIAL_F8153X is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_METRO is not set
-# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MXUPORT is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QT2 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SIMPLE is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_SSU100 is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_UPD78F0730 is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_WISHBONE is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_SNP_UDC_PLAT is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_ENE_UB6250 is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_REALTEK is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TMC is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_USB_ULPI_BUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_VL600 is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YUREX is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USELIB is not set
-# CONFIG_USERFAULTFD is not set
-# CONFIG_USE_OF is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_UWB is not set
-# CONFIG_U_SERIAL_CONSOLE is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_V4L_TEST_DRIVERS is not set
-# CONFIG_VCNL4000 is not set
-# CONFIG_VDSO is not set
-# CONFIG_VEML6070 is not set
-# CONFIG_VETH is not set
-# CONFIG_VEXPRESS_CONFIG is not set
-# CONFIG_VF610_ADC is not set
-# CONFIG_VF610_DAC is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_SWITCHEROO is not set
-# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
-# CONFIG_VHOST_NET is not set
-# CONFIG_VHOST_VSOCK is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7183 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_ADV7393 is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_AK881X is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_VIDEO_CS3308 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_CX2341X is not set
-# CONFIG_VIDEO_CX25840 is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_DM6446_CCDC is not set
-# CONFIG_VIDEO_DT3155 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_GO7007 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_IR_I2C is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_ML86V7667 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_MT9M111 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_NOON010PC30 is not set
-# CONFIG_VIDEO_OMAP2_VOUT is not set
-# CONFIG_VIDEO_OV2640 is not set
-# CONFIG_VIDEO_OV2659 is not set
-# CONFIG_VIDEO_OV6650 is not set
-# CONFIG_VIDEO_OV7640 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_SAA6588 is not set
-# CONFIG_VIDEO_SAA6752HS is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_VIDEO_SONY_BTF_MPX is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_THS8200 is not set
-# CONFIG_VIDEO_TIMBERDALE is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_TM6000 is not set
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_TW2804 is not set
-# CONFIG_VIDEO_TW9903 is not set
-# CONFIG_VIDEO_TW9906 is not set
-# CONFIG_VIDEO_UDA1342 is not set
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_USBTV is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-# CONFIG_VIDEO_VPX3220 is not set
-# CONFIG_VIDEO_VS6624 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_BLK_SCSI is not set
-# CONFIG_VIRTIO_INPUT is not set
-# CONFIG_VIRTIO_MMIO is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
-# CONFIG_VIRT_DRIVERS is not set
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_VL6180 is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_VLAN_8021Q_MVRP is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMWARE_PVSCSI is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_VOP_BUS is not set
-# CONFIG_VORTEX is not set
-# CONFIG_VSOCKETS is not set
-# CONFIG_VT is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_VXGE is not set
-# CONFIG_VXLAN is not set
-# CONFIG_VZ89X is not set
-# CONFIG_W1 is not set
-# CONFIG_W1_CON is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_W1_SLAVE_DS2405 is not set
-# CONFIG_W1_SLAVE_DS2406 is not set
-# CONFIG_W1_SLAVE_DS2408 is not set
-# CONFIG_W1_SLAVE_DS2413 is not set
-# CONFIG_W1_SLAVE_DS2423 is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2438 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_DS2780 is not set
-# CONFIG_W1_SLAVE_DS2781 is not set
-# CONFIG_W1_SLAVE_DS2805 is not set
-# CONFIG_W1_SLAVE_DS28E04 is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAN is not set
-# CONFIG_WANXL is not set
-# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_CORE is not set
-CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
-# CONFIG_WATCHDOG_SYSFS is not set
-# CONFIG_WD80x3 is not set
-# CONFIG_WDAT_WDT is not set
-# CONFIG_WDTPCI is not set
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PRIV=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WILINK_PLATFORM_DATA=y
-# CONFIG_WIMAX is not set
-# CONFIG_WIMAX_GDM72XX is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_WDS is not set
-# CONFIG_WIZNET_W5100 is not set
-# CONFIG_WIZNET_W5300 is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_WL18XX is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_VENDOR_ADMTEK is not set
-# CONFIG_WLAN_VENDOR_ATH is not set
-# CONFIG_WLAN_VENDOR_ATMEL is not set
-# CONFIG_WLAN_VENDOR_BROADCOM is not set
-# CONFIG_WLAN_VENDOR_CISCO is not set
-# CONFIG_WLAN_VENDOR_INTEL is not set
-# CONFIG_WLAN_VENDOR_INTERSIL is not set
-# CONFIG_WLAN_VENDOR_MARVELL is not set
-# CONFIG_WLAN_VENDOR_MEDIATEK is not set
-# CONFIG_WLAN_VENDOR_QUANTENNA is not set
-# CONFIG_WLAN_VENDOR_RALINK is not set
-# CONFIG_WLAN_VENDOR_REALTEK is not set
-# CONFIG_WLAN_VENDOR_RSI is not set
-# CONFIG_WLAN_VENDOR_ST is not set
-# CONFIG_WLAN_VENDOR_TI is not set
-# CONFIG_WLAN_VENDOR_ZYDAS is not set
-# CONFIG_WLCORE is not set
-# CONFIG_WL_MEDIATEK is not set
-CONFIG_WL_TI=y
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-# CONFIG_WQ_WATCHDOG is not set
-# CONFIG_WW_MUTEX_SELFTEST is not set
-# CONFIG_X25 is not set
-# CONFIG_X509_CERTIFICATE_PARSER is not set
-# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
-# CONFIG_X86_PKG_TEMP_THERMAL is not set
-CONFIG_X86_SYSFB=y
-# CONFIG_XEN is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_IPCOMP is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_WARN is not set
-# CONFIG_XILINX_AXI_EMAC is not set
-# CONFIG_XILINX_DMA is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_XILINX_GMII2RGMII is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XILINX_WATCHDOG is not set
-# CONFIG_XILINX_ZYNQMP_DMA is not set
-# CONFIG_XILLYBUS is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_XMON is not set
-CONFIG_XZ_DEC=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
-# CONFIG_XZ_DEC_BCJ is not set
-# CONFIG_XZ_DEC_IA64 is not set
-# CONFIG_XZ_DEC_POWERPC is not set
-# CONFIG_XZ_DEC_SPARC is not set
-# CONFIG_XZ_DEC_TEST is not set
-# CONFIG_XZ_DEC_X86 is not set
-# CONFIG_YAM is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_YENTA is not set
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_ZBUD is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ZEROPLUS_FF is not set
-# CONFIG_ZIIRAVE_WATCHDOG is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_ZLIB_DEFLATE is not set
-# CONFIG_ZLIB_INFLATE is not set
-CONFIG_ZONE_DMA=y
-# CONFIG_ZPA2326 is not set
-# CONFIG_ZPOOL is not set
-# CONFIG_ZRAM is not set
-# CONFIG_ZSMALLOC is not set
-# CONFIG_ZX_TDM is not set

diff --git a/target/linux/generic/config-4.17 b/target/linux/generic/config-4.17
new file mode 100644 (file)
index 0000000..148405f
--- /dev/null
+++ b/target/linux/generic/config-4.17
@@ -0,0 +1,5644 @@
+CONFIG_32BIT=y
+# CONFIG_6LOWPAN is not set
+# CONFIG_6LOWPAN_DEBUGFS is not set
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_AB8500_CORE is not set
+# CONFIG_ABP060MG is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACERHDF is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_ACPI_ALS is not set
+# CONFIG_ACPI_APEI is not set
+# CONFIG_ACPI_BUTTON is not set
+# CONFIG_ACPI_CONFIGFS is not set
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+# CONFIG_ACPI_EXTLOG is not set
+# CONFIG_ACPI_HED is not set
+# CONFIG_ACPI_NFIT is not set
+# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
+# CONFIG_ACPI_TABLE_UPGRADE is not set
+# CONFIG_ACPI_VIDEO is not set
+# CONFIG_AD2S1200 is not set
+# CONFIG_AD2S1210 is not set
+# CONFIG_AD2S90 is not set
+# CONFIG_AD5064 is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_AD5360 is not set
+# CONFIG_AD5380 is not set
+# CONFIG_AD5421 is not set
+# CONFIG_AD5446 is not set
+# CONFIG_AD5449 is not set
+# CONFIG_AD5504 is not set
+# CONFIG_AD5592R is not set
+# CONFIG_AD5593R is not set
+# CONFIG_AD5624R_SPI is not set
+# CONFIG_AD5686 is not set
+# CONFIG_AD5755 is not set
+# CONFIG_AD5761 is not set
+# CONFIG_AD5764 is not set
+# CONFIG_AD5791 is not set
+# CONFIG_AD5933 is not set
+# CONFIG_AD7150 is not set
+# CONFIG_AD7152 is not set
+# CONFIG_AD7192 is not set
+# CONFIG_AD7266 is not set
+# CONFIG_AD7280 is not set
+# CONFIG_AD7291 is not set
+# CONFIG_AD7298 is not set
+# CONFIG_AD7303 is not set
+# CONFIG_AD7476 is not set
+# CONFIG_AD7606 is not set
+# CONFIG_AD7746 is not set
+# CONFIG_AD7766 is not set
+# CONFIG_AD7780 is not set
+# CONFIG_AD7791 is not set
+# CONFIG_AD7793 is not set
+# CONFIG_AD7816 is not set
+# CONFIG_AD7887 is not set
+# CONFIG_AD7923 is not set
+# CONFIG_AD799X is not set
+# CONFIG_AD8366 is not set
+# CONFIG_AD8801 is not set
+# CONFIG_AD9523 is not set
+# CONFIG_AD9832 is not set
+# CONFIG_AD9834 is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADE7753 is not set
+# CONFIG_ADE7754 is not set
+# CONFIG_ADE7758 is not set
+# CONFIG_ADE7759 is not set
+# CONFIG_ADE7854 is not set
+# CONFIG_ADF4350 is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADIS16060 is not set
+# CONFIG_ADIS16080 is not set
+# CONFIG_ADIS16130 is not set
+# CONFIG_ADIS16136 is not set
+# CONFIG_ADIS16201 is not set
+# CONFIG_ADIS16203 is not set
+# CONFIG_ADIS16204 is not set
+# CONFIG_ADIS16209 is not set
+# CONFIG_ADIS16220 is not set
+# CONFIG_ADIS16240 is not set
+# CONFIG_ADIS16260 is not set
+# CONFIG_ADIS16400 is not set
+# CONFIG_ADIS16480 is not set
+# CONFIG_ADJD_S311 is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_ADT7316 is not set
+CONFIG_ADVISE_SYSCALLS=y
+# CONFIG_ADXL345_I2C is not set
+# CONFIG_ADXL345_SPI is not set
+# CONFIG_ADXRS450 is not set
+CONFIG_AEABI=y
+# CONFIG_AFE4403 is not set
+# CONFIG_AFE4404 is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AF_KCM is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AF_RXRPC_INJECT_LOSS is not set
+# CONFIG_AF_RXRPC_IPV6 is not set
+# CONFIG_AGP is not set
+# CONFIG_AHCI_CEVA is not set
+# CONFIG_AHCI_IMX is not set
+# CONFIG_AHCI_MVEBU is not set
+# CONFIG_AHCI_QORIQ is not set
+CONFIG_AIO=y
+# CONFIG_AIRO is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_AIX_PARTITION is not set
+# CONFIG_AK09911 is not set
+# CONFIG_AK8974 is not set
+# CONFIG_AK8975 is not set
+# CONFIG_AL3320A is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_ALLOW_DEV_COREDUMP=y
+# CONFIG_ALTERA_MBOX is not set
+# CONFIG_ALTERA_MSGDMA is not set
+# CONFIG_ALTERA_STAPL is not set
+# CONFIG_ALTERA_TSE is not set
+# CONFIG_ALX is not set
+# CONFIG_AM2315 is not set
+# CONFIG_AM335X_PHY_USB is not set
+# CONFIG_AMBA_PL08X is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMD_MEM_ENCRYPT is not set
+# CONFIG_AMD_PHY is not set
+# CONFIG_AMD_XGBE is not set
+# CONFIG_AMD_XGBE_HAVE_ECC is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_AMILO_RFKILL is not set
+# CONFIG_ANDROID is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APDS9300 is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_APDS9960 is not set
+# CONFIG_APM8018X is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_APPLE_GMUX is not set
+# CONFIG_APPLE_PROPERTIES is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AQTION is not set
+# CONFIG_AQUANTIA_PHY is not set
+# CONFIG_AR5523 is not set
+# CONFIG_AR7 is not set
+# CONFIG_AR8216_PHY is not set
+# CONFIG_AR8216_PHY_LEDS is not set
+# CONFIG_ARCH_ACTIONS is not set
+# CONFIG_ARCH_ALPINE is not set
+# CONFIG_ARCH_ARTPEC is not set
+# CONFIG_ARCH_ASPEED is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCM is not set
+# CONFIG_ARCH_BCM2835 is not set
+# CONFIG_ARCH_BCM_21664 is not set
+# CONFIG_ARCH_BCM_23550 is not set
+# CONFIG_ARCH_BCM_281XX is not set
+# CONFIG_ARCH_BCM_5301X is not set
+# CONFIG_ARCH_BCM_53573 is not set
+# CONFIG_ARCH_BCM_63XX is not set
+# CONFIG_ARCH_BCM_CYGNUS is not set
+# CONFIG_ARCH_BCM_IPROC is not set
+# CONFIG_ARCH_BCM_NSP is not set
+# CONFIG_ARCH_BERLIN is not set
+# CONFIG_ARCH_BRCMSTB is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DIGICOLOR is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_EXYNOS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_GEMINI is not set
+CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
+# CONFIG_ARCH_HI3xxx is not set
+# CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_HISI is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KEYSTONE is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_LAYERSCAPE is not set
+# CONFIG_ARCH_LG1K is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MEDIATEK is not set
+# CONFIG_ARCH_MESON is not set
+CONFIG_ARCH_MMAP_RND_BITS=8
+CONFIG_ARCH_MMAP_RND_BITS_MAX=16
+CONFIG_ARCH_MMAP_RND_BITS_MIN=8
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MULTIPLATFORM is not set
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MVEBU is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_NSPIRE is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP2PLUS is not set
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_OXNAS is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_PICOXCELL is not set
+# CONFIG_ARCH_PRIMA2 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_QCOM is not set
+# CONFIG_ARCH_REALTEK is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C24XX is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SEATTLE is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_SHMOBILE_MULTI is not set
+# CONFIG_ARCH_SIRF is not set
+# CONFIG_ARCH_SOCFPGA is not set
+# CONFIG_ARCH_SPRD is not set
+# CONFIG_ARCH_STI is not set
+# CONFIG_ARCH_STRATIX10 is not set
+# CONFIG_ARCH_SUNXI is not set
+# CONFIG_ARCH_TANGO is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_THUNDER is not set
+# CONFIG_ARCH_THUNDER2 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_UNIPHIER is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_VIRT is not set
+# CONFIG_ARCH_VT8500 is not set
+# CONFIG_ARCH_VULCAN is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
+# CONFIG_ARCH_WM8505 is not set
+# CONFIG_ARCH_WM8750 is not set
+# CONFIG_ARCH_WM8850 is not set
+# CONFIG_ARCH_XGENE is not set
+# CONFIG_ARCH_ZX is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_ZYNQMP is not set
+# CONFIG_ARCNET is not set
+# CONFIG_ARC_EMAC is not set
+# CONFIG_ARM64_ERRATUM_819472 is not set
+# CONFIG_ARM64_ERRATUM_824069 is not set
+# CONFIG_ARM64_ERRATUM_826319 is not set
+# CONFIG_ARM64_ERRATUM_827319 is not set
+# CONFIG_ARM64_ERRATUM_832075 is not set
+# CONFIG_ARM64_ERRATUM_834220 is not set
+# CONFIG_ARM64_ERRATUM_843419 is not set
+# CONFIG_ARM64_ERRATUM_845719 is not set
+# CONFIG_ARM64_ERRATUM_858921 is not set
+# CONFIG_ARM64_RELOC_TEST is not set
+# CONFIG_ARM_APPENDED_DTB is not set
+# CONFIG_ARM_ARCH_TIMER is not set
+# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
+# CONFIG_ARM_CCI is not set
+# CONFIG_ARM_CCI400_PMU is not set
+# CONFIG_ARM_CCI5xx_PMU is not set
+# CONFIG_ARM_CCN is not set
+# CONFIG_ARM_CPUIDLE is not set
+CONFIG_ARM_CPU_TOPOLOGY=y
+# CONFIG_ARM_CRYPTO is not set
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+# CONFIG_ARM_ERRATA_326103 is not set
+# CONFIG_ARM_ERRATA_364296 is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+# CONFIG_ARM_ERRATA_643719 is not set
+# CONFIG_ARM_ERRATA_720789 is not set
+# CONFIG_ARM_ERRATA_742230 is not set
+# CONFIG_ARM_ERRATA_742231 is not set
+# CONFIG_ARM_ERRATA_743622 is not set
+# CONFIG_ARM_ERRATA_751472 is not set
+# CONFIG_ARM_ERRATA_754322 is not set
+# CONFIG_ARM_ERRATA_754327 is not set
+# CONFIG_ARM_ERRATA_764369 is not set
+# CONFIG_ARM_ERRATA_773022 is not set
+# CONFIG_ARM_ERRATA_775420 is not set
+# CONFIG_ARM_ERRATA_798181 is not set
+# CONFIG_ARM_ERRATA_818325_852422 is not set
+# CONFIG_ARM_ERRATA_821420 is not set
+# CONFIG_ARM_ERRATA_825619 is not set
+# CONFIG_ARM_ERRATA_852421 is not set
+# CONFIG_ARM_ERRATA_852423 is not set
+CONFIG_ARM_GIC_MAX_NR=1
+# CONFIG_ARM_KERNMEM_PERMS is not set
+# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
+# CONFIG_ARM_KPROBES_TEST is not set
+# CONFIG_ARM_MHU is not set
+# CONFIG_ARM_MODULE_PLTS is not set
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+# CONFIG_ARM_PSCI is not set
+# CONFIG_ARM_PSCI_CHECKER is not set
+# CONFIG_ARM_PTDUMP is not set
+# CONFIG_ARM_SBSA_WATCHDOG is not set
+# CONFIG_ARM_SCPI_PROTOCOL is not set
+# CONFIG_ARM_TIMER_SP804 is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_ARM_VIRT_EXT is not set
+# CONFIG_AS3935 is not set
+# CONFIG_ASM9260_TIMER is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_ASUS_WIRELESS is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
+# CONFIG_ASYNC_RAID6_TEST is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_AT91_SAMA5D2_ADC is not set
+# CONFIG_ATA is not set
+# CONFIG_ATAGS is not set
+CONFIG_ATAGS_PROC=y
+# CONFIG_ATALK is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_ATA_ACPI is not set
+CONFIG_ATA_BMDMA=y
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATH10K is not set
+# CONFIG_ATH25 is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH6KL is not set
+# CONFIG_ATH79 is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATH9K_HTC is not set
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL2 is not set
+# CONFIG_ATLAS_PH_SENSOR is not set
+# CONFIG_ATM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATMEL_PIT is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_BR2684 is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_ATP is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
+# CONFIG_AURORA_NB8800 is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTO_ZRELADDR is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX88796 is not set
+# CONFIG_AXP20X_ADC is not set
+# CONFIG_AXP20X_POWER is not set
+# CONFIG_AXP288_ADC is not set
+# CONFIG_AXP288_FUEL_GAUGE is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_B44 is not set
+# CONFIG_B53 is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+# CONFIG_BACKLIGHT_APPLE is not set
+# CONFIG_BACKLIGHT_ARCXCNN is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
+# CONFIG_BACKLIGHT_LM3639 is not set
+# CONFIG_BACKLIGHT_LP855X is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_PANDORA is not set
+# CONFIG_BACKLIGHT_PM8941_WLED is not set
+# CONFIG_BACKLIGHT_RPI is not set
+# CONFIG_BACKLIGHT_SAHARA is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_BATTERY_BQ27XXX is not set
+# CONFIG_BATTERY_BQ27XXX_HDQ is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2781 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_GAUGE_LTC2941 is not set
+# CONFIG_BATTERY_GOLDFISH is not set
+# CONFIG_BATTERY_LEGO_EV3 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_BATTERY_MAX1721X is not set
+# CONFIG_BATTERY_SBS is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+# CONFIG_BCACHE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_BCM7038_WDT is not set
+# CONFIG_BCM7XXX_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_BCMA is not set
+# CONFIG_BCMA_DRIVER_GPIO is not set
+CONFIG_BCMA_POSSIBLE=y
+# CONFIG_BCMGENET is not set
+# CONFIG_BCM_IPROC_ADC is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_BCM_SBA_RAID is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BE2NET is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BGMAC is not set
+# CONFIG_BH1750 is not set
+# CONFIG_BH1780 is not set
+# CONFIG_BIG_KEYS is not set
+# CONFIG_BIG_LITTLE is not set
+# CONFIG_BINARY_PRINTF is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_SCRIPT=y
+CONFIG_BITREVERSE=y
+# CONFIG_BLK_CMDLINE_PARSER is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_DEBUG_FS is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_BSGLIB is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CS5536 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDE_AU1XXX is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_NULL_BLK is not set
+# CONFIG_BLK_DEV_NVME is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_PMEM is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_BLK_DEV_RSXX is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SKD is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_THROTTLING is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_ZONED is not set
+# CONFIG_BLK_SED_OPAL is not set
+# CONFIG_BLK_WBT is not set
+CONFIG_BLOCK=y
+# CONFIG_BMA180 is not set
+# CONFIG_BMA220 is not set
+# CONFIG_BMC150_ACCEL is not set
+# CONFIG_BMC150_MAGN is not set
+# CONFIG_BMC150_MAGN_I2C is not set
+# CONFIG_BMC150_MAGN_SPI is not set
+# CONFIG_BMG160 is not set
+# CONFIG_BMI160_I2C is not set
+# CONFIG_BMI160_SPI is not set
+# CONFIG_BMIPS_GENERIC is not set
+# CONFIG_BMP085 is not set
+# CONFIG_BMP085_I2C is not set
+# CONFIG_BMP085_SPI is not set
+# CONFIG_BMP280 is not set
+# CONFIG_BNA is not set
+# CONFIG_BNX2 is not set
+# CONFIG_BNX2X is not set
+# CONFIG_BNXT is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOKE_WDT is not set
+CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_BOOT_RAW=y
+CONFIG_BPF=y
+# CONFIG_BPF_JIT is not set
+# CONFIG_BPF_JIT_ALWAYS_ON is not set
+# CONFIG_BPF_STREAM_PARSER is not set
+CONFIG_BPF_SYSCALL=y
+# CONFIG_BPQETHER is not set
+CONFIG_BQL=y
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_BRCMFMAC is not set
+# CONFIG_BRCMSMAC is not set
+# CONFIG_BRCMSTB_GISB_ARB is not set
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_IP6 is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_BRIDGE_VLAN_FILTERING is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_BT is not set
+# CONFIG_BTRFS_ASSERT is not set
+# CONFIG_BTRFS_DEBUG is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
+# CONFIG_BT_ATH3K is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_BREDR is not set
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTUSB_RTL is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIUART_3WIRE is not set
+# CONFIG_BT_HCIUART_AG6XX is not set
+# CONFIG_BT_HCIUART_ATH3K is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIUART_MRVL is not set
+# CONFIG_BT_HCIUART_QCA is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+# CONFIG_BT_HS is not set
+# CONFIG_BT_LE is not set
+# CONFIG_BT_LEDS is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BT_SELFTEST is not set
+CONFIG_BUG=y
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+# CONFIG_BUILD_BIN2C is not set
+# CONFIG_C2PORT is not set
+CONFIG_CACHE_L2X0_PMU=y
+# CONFIG_CADENCE_WATCHDOG is not set
+# CONFIG_CAIF is not set
+# CONFIG_CAN is not set
+# CONFIG_CAN_BCM is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_CAN_DEV is not set
+# CONFIG_CAN_GS_USB is not set
+# CONFIG_CAN_GW is not set
+# CONFIG_CAN_HI311X is not set
+# CONFIG_CAN_IFI_CANFD is not set
+# CONFIG_CAN_MCBA_USB is not set
+# CONFIG_CAN_M_CAN is not set
+# CONFIG_CAN_PEAK_PCIEFD is not set
+# CONFIG_CAN_RAW is not set
+# CONFIG_CAN_RCAR is not set
+# CONFIG_CAN_RCAR_CANFD is not set
+# CONFIG_CAN_SLCAN is not set
+# CONFIG_CAN_SUN4I is not set
+# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_VXCAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CARL9170 is not set
+# CONFIG_CASSINI is not set
+# CONFIG_CAVIUM_CPT is not set
+# CONFIG_CAVIUM_ERRATUM_22375 is not set
+# CONFIG_CAVIUM_ERRATUM_23144 is not set
+# CONFIG_CAVIUM_ERRATUM_23154 is not set
+# CONFIG_CAVIUM_ERRATUM_27456 is not set
+# CONFIG_CAVIUM_ERRATUM_30115 is not set
+# CONFIG_CAVIUM_OCTEON_SOC is not set
+# CONFIG_CB710_CORE is not set
+# CONFIG_CC10001_ADC is not set
+# CONFIG_CCS811 is not set
+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CC_STACKPROTECTOR_NONE=y
+# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_CFG80211 is not set
+# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CGROUP_BPF is not set
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_RDMA is not set
+# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24257 is not set
+# CONFIG_CHARGER_BQ24735 is not set
+# CONFIG_CHARGER_BQ25890 is not set
+# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
+# CONFIG_CHARGER_GPIO is not set
+# CONFIG_CHARGER_ISP1704 is not set
+# CONFIG_CHARGER_LP8727 is not set
+# CONFIG_CHARGER_LTC3651 is not set
+# CONFIG_CHARGER_MANAGER is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_RT9455 is not set
+# CONFIG_CHARGER_SBS is not set
+# CONFIG_CHARGER_SMB347 is not set
+# CONFIG_CHARGER_TWL4030 is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHELSIO_T4 is not set
+# CONFIG_CHELSIO_T4VF is not set
+# CONFIG_CHROME_PLATFORMS is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS is not set
+# CONFIG_CIFS_ACL is not set
+# CONFIG_CIFS_DEBUG is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_FSCACHE is not set
+# CONFIG_CIFS_NFSD_EXPORT is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_SMB2 is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIO_DAC is not set
+# CONFIG_CLEANCACHE is not set
+# CONFIG_CLKSRC_VERSATILE is not set
+# CONFIG_CLK_HSDK is not set
+# CONFIG_CLK_QORIQ is not set
+# CONFIG_CLOCK_THERMAL is not set
+CONFIG_CLS_U32_MARK=y
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CM32181 is not set
+# CONFIG_CM3232 is not set
+# CONFIG_CM3323 is not set
+# CONFIG_CM3605 is not set
+# CONFIG_CM36651 is not set
+# CONFIG_CMA is not set
+CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_EXTEND is not set
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
+# CONFIG_CMDLINE_PARTITION is not set
+# CONFIG_CNIC is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_COMEDI is not set
+# CONFIG_COMMON_CLK_CDCE706 is not set
+# CONFIG_COMMON_CLK_CDCE925 is not set
+# CONFIG_COMMON_CLK_CS2000_CP is not set
+# CONFIG_COMMON_CLK_IPROC is not set
+# CONFIG_COMMON_CLK_NXP is not set
+# CONFIG_COMMON_CLK_PIC32 is not set
+# CONFIG_COMMON_CLK_PWM is not set
+# CONFIG_COMMON_CLK_PXA is not set
+# CONFIG_COMMON_CLK_QCOM is not set
+# CONFIG_COMMON_CLK_SI514 is not set
+# CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_VC5 is not set
+# CONFIG_COMMON_CLK_VERSATILE is not set
+# CONFIG_COMMON_CLK_XGENE is not set
+# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
+# CONFIG_COMPACTION is not set
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_COMPILE_TEST is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
+CONFIG_CONSTRUCTORS=y
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_COPS is not set
+# CONFIG_CORDIC is not set
+# CONFIG_COREDUMP is not set
+# CONFIG_CORESIGHT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_CORTINA_PHY is not set
+# CONFIG_CPA_DEBUG is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CPU_IDLE_GOV_MENU is not set
+# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
+# CONFIG_CPU_NO_EFFICIENT_FFS is not set
+CONFIG_CPU_SW_DOMAIN_PAN=y
+# CONFIG_CRAMFS is not set
+CONFIG_CRASHLOG=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC32_SARWATE=y
+# CONFIG_CRC32_SELFTEST is not set
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SLICEBY8 is not set
+# CONFIG_CRC4 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_CRC8 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CROSS_COMPILE=""
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_842 is not set
+# CONFIG_CRYPTO_AEAD is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_AES_ARM is not set
+# CONFIG_CRYPTO_AES_ARM_BS is not set
+# CONFIG_CRYPTO_AES_NI_INTEL is not set
+# CONFIG_CRYPTO_AES_TI is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CHACHA20 is not set
+# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
+# CONFIG_CRYPTO_CMAC is not set
+# CONFIG_CRYPTO_CRC32 is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+# CONFIG_CRYPTO_CRCT10DIF is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
+# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
+# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
+# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
+# CONFIG_CRYPTO_DEV_CCP is not set
+# CONFIG_CRYPTO_DEV_CCREE is not set
+# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
+# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
+# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
+# CONFIG_CRYPTO_DEV_MV_CESA is not set
+# CONFIG_CRYPTO_DEV_MXS_DCP is not set
+# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
+# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
+# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
+# CONFIG_CRYPTO_DEV_QAT_C62X is not set
+# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
+# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
+# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
+# CONFIG_CRYPTO_DEV_QCE is not set
+# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
+# CONFIG_CRYPTO_DEV_SAHARA is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+# CONFIG_CRYPTO_DEV_VIRTIO is not set
+# CONFIG_CRYPTO_DH is not set
+# CONFIG_CRYPTO_DRBG_CTR is not set
+# CONFIG_CRYPTO_DRBG_HASH is not set
+# CONFIG_CRYPTO_DRBG_MENU is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_ECDH is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
+# CONFIG_CRYPTO_HASH is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_JITTERENTROPY is not set
+# CONFIG_CRYPTO_KEYWRAP is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZ4 is not set
+# CONFIG_CRYPTO_LZ4HC is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_MCRYPTD is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_PCOMP is not set
+# CONFIG_CRYPTO_PCOMP2 is not set
+CONFIG_CRYPTO_PCRYPT=y
+# CONFIG_CRYPTO_POLY1305 is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_RNG is not set
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA1_ARM is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA3 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_USER is not set
+# CONFIG_CRYPTO_USER_API_AEAD is not set
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_RNG is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_VMAC is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CS5535_MFGPT is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_CUSE is not set
+# CONFIG_CW1200 is not set
+# CONFIG_CXL_AFU_DRIVER_OPS is not set
+# CONFIG_CXL_BASE is not set
+# CONFIG_CXL_EEH is not set
+# CONFIG_CXL_KERNEL_API is not set
+# CONFIG_CXL_LIB is not set
+# CONFIG_CYPRESS_FIRMWARE is not set
+# CONFIG_DA280 is not set
+# CONFIG_DA311 is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DAX is not set
+# CONFIG_DCB is not set
+# CONFIG_DDR is not set
+# CONFIG_DEBUG_ALIGN_RODATA is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_INFO_DWARF4 is not set
+CONFIG_DEBUG_INFO_REDUCED=y
+# CONFIG_DEBUG_INFO_SPLIT is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_KOBJECT_RELEASE is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_LL_UART_8250 is not set
+# CONFIG_DEBUG_LL_UART_PL01X is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PAGE_REF is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RODATA is not set
+# CONFIG_DEBUG_RODATA_TEST is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_SEMIHOSTING is not set
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
+# CONFIG_DEBUG_UART_BCM63XX is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_WX is not set
+# CONFIG_DEBUG_ZBOOT is not set
+# CONFIG_DECNET is not set
+CONFIG_DEFAULT_CUBIC=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DELL_LAPTOP is not set
+# CONFIG_DELL_RBTN is not set
+# CONFIG_DELL_SMO8800 is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_DEVMEM is not set
+CONFIG_DEVPORT=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_DEVTMPFS is not set
+# CONFIG_DEVTMPFS_MOUNT is not set
+# CONFIG_DEV_DAX is not set
+# CONFIG_DGAP is not set
+# CONFIG_DGNC is not set
+# CONFIG_DHT11 is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
+# CONFIG_DISPLAY_CONNECTOR_DVI is not set
+# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
+# CONFIG_DISPLAY_ENCODER_TFP410 is not set
+# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
+# CONFIG_DISPLAY_PANEL_DPI is not set
+# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
+# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DM9000 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMADEVICES_DEBUG is not set
+# CONFIG_DMARD06 is not set
+# CONFIG_DMARD09 is not set
+# CONFIG_DMARD10 is not set
+# CONFIG_DMASCC is not set
+# CONFIG_DMATEST is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DMA_FENCE_TRACE is not set
+# CONFIG_DMA_SHARED_BUFFER is not set
+# CONFIG_DM_CACHE is not set
+# CONFIG_DM_DEBUG is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_ERA is not set
+# CONFIG_DM_FLAKEY is not set
+# CONFIG_DM_INTEGRITY is not set
+# CONFIG_DM_LOG_USERSPACE is not set
+# CONFIG_DM_LOG_WRITES is not set
+# CONFIG_DM_MQ_DEFAULT is not set
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_RAID is not set
+# CONFIG_DM_SWITCH is not set
+# CONFIG_DM_THIN_PROVISIONING is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_DM_VERITY is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DNET is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DNS_RESOLVER is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_DP83848_PHY is not set
+# CONFIG_DP83867_PHY is not set
+# CONFIG_DPOT_DAC is not set
+CONFIG_DQL=y
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_DRM is not set
+# CONFIG_DRM_AMDGPU is not set
+# CONFIG_DRM_ANALOGIX_ANX78XX is not set
+# CONFIG_DRM_ARCPGU is not set
+# CONFIG_DRM_ARMADA is not set
+# CONFIG_DRM_AST is not set
+# CONFIG_DRM_BOCHS is not set
+# CONFIG_DRM_CIRRUS_QEMU is not set
+# CONFIG_DRM_DEBUG_MM is not set
+# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
+# CONFIG_DRM_DP_AUX_CHARDEV is not set
+# CONFIG_DRM_DUMB_VGA_DAC is not set
+# CONFIG_DRM_DW_HDMI_CEC is not set
+# CONFIG_DRM_ETNAVIV is not set
+# CONFIG_DRM_EXYNOS is not set
+# CONFIG_DRM_FBDEV_EMULATION is not set
+# CONFIG_DRM_FSL_DCU is not set
+# CONFIG_DRM_HDLCD is not set
+# CONFIG_DRM_HISI_HIBMC is not set
+# CONFIG_DRM_HISI_KIRIN is not set
+# CONFIG_DRM_I2C_ADV7511 is not set
+# CONFIG_DRM_I2C_CH7006 is not set
+# CONFIG_DRM_I2C_NXP_TDA998X is not set
+# CONFIG_DRM_I2C_SIL164 is not set
+# CONFIG_DRM_LEGACY is not set
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+# CONFIG_DRM_LVDS_ENCODER is not set
+# CONFIG_DRM_MALI_DISPLAY is not set
+# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
+# CONFIG_DRM_MGAG200 is not set
+# CONFIG_DRM_MXSFB is not set
+# CONFIG_DRM_NOUVEAU is not set
+# CONFIG_DRM_NXP_PTN3460 is not set
+# CONFIG_DRM_OMAP is not set
+# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
+# CONFIG_DRM_PANEL_LG_LG4573 is not set
+# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
+# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
+# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
+# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
+# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
+# CONFIG_DRM_PARADE_PS8622 is not set
+# CONFIG_DRM_PL111 is not set
+# CONFIG_DRM_QXL is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_RCAR_DW_HDMI is not set
+# CONFIG_DRM_SII902X is not set
+# CONFIG_DRM_SIL_SII8620 is not set
+# CONFIG_DRM_STI is not set
+# CONFIG_DRM_STM is not set
+# CONFIG_DRM_TILCDC is not set
+# CONFIG_DRM_TINYDRM is not set
+# CONFIG_DRM_TI_TFP410 is not set
+# CONFIG_DRM_TOSHIBA_TC358767 is not set
+# CONFIG_DRM_UDL is not set
+# CONFIG_DRM_VBOXVIDEO is not set
+# CONFIG_DRM_VGEM is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DS1803 is not set
+# CONFIG_DST_CACHE is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+CONFIG_DUMMY_CONSOLE_COLUMNS=80
+CONFIG_DUMMY_CONSOLE_ROWS=25
+# CONFIG_DUMMY_IRQ is not set
+# CONFIG_DVB_AU8522_V4L is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_DIB0090 is not set
+# CONFIG_DWC_XLGMAC is not set
+# CONFIG_DWMAC_IPQ806X is not set
+# CONFIG_DWMAC_LPC18XX is not set
+# CONFIG_DWMAC_MESON is not set
+# CONFIG_DWMAC_ROCKCHIP is not set
+# CONFIG_DWMAC_SOCFPGA is not set
+# CONFIG_DWMAC_STI is not set
+# CONFIG_DW_DMAC is not set
+# CONFIG_DW_DMAC_PCI is not set
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_E100 is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_HWTS is not set
+# CONFIG_EARLY_PRINTK_8250 is not set
+# CONFIG_EARLY_PRINTK_USB_XDBC is not set
+# CONFIG_ECHO is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_EDAC is not set
+# CONFIG_EEEPC_LAPTOP is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_93XX46 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
+# CONFIG_EEPROM_IDT_89HPESX is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EFI is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_EFS_FS is not set
+CONFIG_ELFCORE=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_EMAC_ROCKCHIP is not set
+CONFIG_EMBEDDED=y
+# CONFIG_EM_TIMER_STI is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENA_ETHERNET is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_ENCX24J600 is not set
+# CONFIG_ENIC is not set
+# CONFIG_ENVELOPE_DETECTOR is not set
+# CONFIG_EPAPR_PARAVIRT is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_ET131X is not set
+CONFIG_ETHERNET=y
+# CONFIG_ETHOC is not set
+CONFIG_EVENTFD=y
+CONFIG_EXPERT=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_EXPORTFS_BLOCK_OPS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_DEBUG is not set
+# CONFIG_EXT4_ENCRYPTION is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+CONFIG_EXT4_USE_FOR_EXT2=y
+# CONFIG_EXTCON is not set
+# CONFIG_EXTCON_ADC_JACK is not set
+# CONFIG_EXTCON_AXP288 is not set
+# CONFIG_EXTCON_GPIO is not set
+# CONFIG_EXTCON_INTEL_INT3496 is not set
+# CONFIG_EXTCON_MAX3355 is not set
+# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
+# CONFIG_EXTCON_RT8973A is not set
+# CONFIG_EXTCON_SM5502 is not set
+# CONFIG_EXTCON_USB_GPIO is not set
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_EXYNOS_ADC is not set
+# CONFIG_EXYNOS_VIDEO is not set
+# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_F2FS_FAULT_INJECTION is not set
+# CONFIG_F2FS_FS is not set
+# CONFIG_F2FS_FS_ENCRYPTION is not set
+# CONFIG_F2FS_FS_POSIX_ACL is not set
+# CONFIG_F2FS_IO_TRACE is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_FANOTIFY is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_DEFAULT_UTF8 is not set
+# CONFIG_FAT_FS is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_FB is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_BOTH_ENDIAN is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_DA8XX is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_I740 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_IMX is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_MXS is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_NEOMAGIC is not set
+CONFIG_FB_NOTIFY=y
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_OMAP2 is not set
+# CONFIG_FB_OPENCORES is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_PS3 is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIMPLE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SM712 is not set
+# CONFIG_FB_SM750 is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_SSD1307 is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TFT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_XGI is not set
+# CONFIG_FCOE is not set
+# CONFIG_FCOE_FNIC is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+# CONFIG_FENCE_TRACE is not set
+# CONFIG_FHANDLE is not set
+CONFIG_FIB_RULES=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
+# CONFIG_FIREWIRE_SERIAL is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FLATMEM=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FM10K is not set
+# CONFIG_FMC is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_FORTIFY_SOURCE=y
+# CONFIG_FPGA is not set
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_FRAME_POINTER is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_FREEZER is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_FSCACHE is not set
+# CONFIG_FSI is not set
+# CONFIG_FSL_EDMA is not set
+# CONFIG_FSL_ERRATUM_A008585 is not set
+# CONFIG_FSL_MC_BUS is not set
+# CONFIG_FSL_PQ_MDIO is not set
+# CONFIG_FSL_XGMAC_MDIO is not set
+CONFIG_FSNOTIFY=y
+# CONFIG_FS_DAX is not set
+# CONFIG_FS_ENCRYPTION is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTGMAC100 is not set
+# CONFIG_FTL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_FTRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_FUJITSU_ES is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_FUJITSU_TABLET is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+# CONFIG_FW_CFG_SYSFS is not set
+CONFIG_FW_LOADER=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
+CONFIG_GACT_PROB=y
+# CONFIG_GADGET_UAC1 is not set
+# CONFIG_GAMEPORT is not set
+# CONFIG_GATEWORKS_GW16083 is not set
+# CONFIG_GCC_PLUGINS is not set
+# CONFIG_GCOV is not set
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_GDB_SCRIPTS is not set
+# CONFIG_GENERIC_ADC_BATTERY is not set
+# CONFIG_GENERIC_ADC_THERMAL is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_HWEIGHT=y
+# CONFIG_GENERIC_IRQ_DEBUGFS is not set
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_NET_UTILS=y
+# CONFIG_GENERIC_PHY is not set
+# CONFIG_GENEVE is not set
+# CONFIG_GENWQE is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_GIGASET_CAPI is not set
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GIGASET_DUMMYLL is not set
+# CONFIG_GLOB_SELFTEST is not set
+# CONFIG_GOLDFISH is not set
+# CONFIG_GOOGLE_FIRMWARE is not set
+# CONFIG_GP2AP020A00F is not set
+# CONFIG_GPIOLIB is not set
+# CONFIG_GPIO_74X164 is not set
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_GPIO_ADNP is not set
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_ALTERA is not set
+# CONFIG_GPIO_AMD8111 is not set
+# CONFIG_GPIO_AMDPT is not set
+# CONFIG_GPIO_BCM_KONA is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_DWAPB is not set
+# CONFIG_GPIO_EM is not set
+# CONFIG_GPIO_EXAR is not set
+# CONFIG_GPIO_F7188X is not set
+# CONFIG_GPIO_FTGPIO010 is not set
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_GPIO_MM is not set
+# CONFIG_GPIO_GRGPIO is not set
+# CONFIG_GPIO_ICH is not set
+# CONFIG_GPIO_IT87 is not set
+# CONFIG_GPIO_LYNXPOINT is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_ML_IOH is not set
+# CONFIG_GPIO_MOCKUP is not set
+# CONFIG_GPIO_MPC8XXX is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_PCH is not set
+# CONFIG_GPIO_PCI_IDIO_16 is not set
+# CONFIG_GPIO_PISOSR is not set
+# CONFIG_GPIO_PL061 is not set
+# CONFIG_GPIO_RCAR is not set
+# CONFIG_GPIO_RDC321X is not set
+# CONFIG_GPIO_SCH is not set
+# CONFIG_GPIO_SCH311X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_SYSCON is not set
+# CONFIG_GPIO_SYSFS is not set
+# CONFIG_GPIO_TPIC2810 is not set
+# CONFIG_GPIO_TS4900 is not set
+# CONFIG_GPIO_TS5500 is not set
+# CONFIG_GPIO_VX855 is not set
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_GPIO_WS16C48 is not set
+# CONFIG_GPIO_XGENE is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_XRA1403 is not set
+# CONFIG_GPIO_ZEVIO is not set
+# CONFIG_GPIO_ZX is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_GREYBUS is not set
+# CONFIG_GS_FPGABOOT is not set
+# CONFIG_GTP is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_HARDENED_USERCOPY is not set
+# CONFIG_HARDEN_BRANCH_PREDICTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
+# CONFIG_HAVE_ARCH_HASH is not set
+CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
+# CONFIG_HAVE_ARCH_VMAP_STACK is not set
+CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
+# CONFIG_HAVE_ARM_ARCH_TIMER is not set
+CONFIG_HAVE_EXIT_THREAD=y
+CONFIG_HAVE_GCC_PLUGINS=y
+CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_CAT=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_NMI=y
+# CONFIG_HCALL_STATS is not set
+# CONFIG_HDC100X is not set
+# CONFIG_HDLC is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC_PPP is not set
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HDMI_LPE_AUDIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFS_FS_POSIX_ACL is not set
+# CONFIG_HI8435 is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_HID is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACCUTOUCH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_ACRUX_FF is not set
+# CONFIG_HID_ALPS is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_APPLEIR is not set
+# CONFIG_HID_ASUS is not set
+# CONFIG_HID_AUREAL is not set
+# CONFIG_HID_BATTERY_STRENGTH is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BETOP_FF is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CMEDIA is not set
+# CONFIG_HID_CORSAIR is not set
+# CONFIG_HID_CP2112 is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GEMBIRD is not set
+# CONFIG_HID_GENERIC is not set
+# CONFIG_HID_GFRM is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_GT683R is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_ICADE is not set
+# CONFIG_HID_ITE is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LED is not set
+# CONFIG_HID_LENOVO is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_LOGITECH_DJ is not set
+# CONFIG_HID_LOGITECH_HIDPP is not set
+# CONFIG_HID_MAGICMOUSE is not set
+# CONFIG_HID_MAYFLASH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTI is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PENMOUNT is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PID is not set
+# CONFIG_HID_PLANTRONICS is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_RETRODE is not set
+# CONFIG_HID_RMI is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SENSOR_HUB is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_STEELSERIES is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_THINGM is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_UDRAW_PS3 is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HINIC is not set
+# CONFIG_HIP04_ETH is not set
+# CONFIG_HIPPI is not set
+# CONFIG_HISILICON_ERRATUM_161010101 is not set
+# CONFIG_HISI_FEMAC is not set
+# CONFIG_HIX5HD2_GMAC is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_HNS is not set
+# CONFIG_HNS3 is not set
+# CONFIG_HNS_DSAF is not set
+# CONFIG_HNS_ENET is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HP03 is not set
+# CONFIG_HP100 is not set
+# CONFIG_HP206C is not set
+CONFIG_HPET_MMAP_DEFAULT=y
+# CONFIG_HPFS_FS is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_HP_WIRELESS is not set
+# CONFIG_HSI is not set
+# CONFIG_HSR is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTS221 is not set
+# CONFIG_HTU21 is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_HWLAT_TRACER is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWSPINLOCK is not set
+# CONFIG_HWSPINLOCK_OMAP is not set
+CONFIG_HW_PERF_EVENTS=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_ATMEL is not set
+# CONFIG_HW_RANDOM_CAVIUM is not set
+# CONFIG_HW_RANDOM_EXYNOS is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
+# CONFIG_HW_RANDOM_OMAP3_ROM is not set
+# CONFIG_HW_RANDOM_PPC4XX is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM_TPM is not set
+# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HW_RANDOM_VIRTIO is not set
+# CONFIG_HX711 is not set
+# CONFIG_HYPERV is not set
+# CONFIG_HYPERV_TSCPAGE is not set
+# CONFIG_HYSDN is not set
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_200 is not set
+# CONFIG_HZ_24 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_500 is not set
+# CONFIG_HZ_PERIODIC is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
+# CONFIG_I2C_AU1550 is not set
+# CONFIG_I2C_BCM2835 is not set
+# CONFIG_I2C_BCM_IPROC is not set
+# CONFIG_I2C_CADENCE is not set
+# CONFIG_I2C_CBUS_GPIO is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEMUX_PINCTRL is not set
+# CONFIG_I2C_DESIGNWARE_PCI is not set
+# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_EG20T is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_EMEV2 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_HID is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_IMG is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_ISMT is not set
+# CONFIG_I2C_MLXCPLD is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_MUX is not set
+# CONFIG_I2C_MUX_GPIO is not set
+# CONFIG_I2C_MUX_GPMUX is not set
+# CONFIG_I2C_MUX_LTC4306 is not set
+# CONFIG_I2C_MUX_MLXCPLD is not set
+# CONFIG_I2C_MUX_PCA9541 is not set
+# CONFIG_I2C_MUX_PCA954x is not set
+# CONFIG_I2C_MUX_PINCTRL is not set
+# CONFIG_I2C_MUX_REG is not set
+# CONFIG_I2C_MV64XXX is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_NOMADIK is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OCTEON is not set
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_RCAR is not set
+# CONFIG_I2C_RK3X is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_SCMI is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_SLAVE is not set
+# CONFIG_I2C_SMBUS is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_THUNDERX is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VERSATILE is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_XILINX is not set
+# CONFIG_I40E is not set
+# CONFIG_I40EVF is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_IAQCORE is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_EMAC_DEBUG is not set
+# CONFIG_IBM_EMAC_EMAC4 is not set
+# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_EMAC_RGMII is not set
+# CONFIG_IBM_EMAC_TAH is not set
+# CONFIG_IBM_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_IDE is not set
+# CONFIG_IDEAPAD_LAPTOP is not set
+# CONFIG_IDE_GD is not set
+# CONFIG_IDE_PROC_FS is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDLE_PAGE_TRACKING is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_IEEE802154_ADF7242 is not set
+# CONFIG_IEEE802154_ATUSB is not set
+# CONFIG_IEEE802154_CA8210 is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_IIO is not set
+# CONFIG_IIO_BUFFER_CB is not set
+# CONFIG_IIO_CONFIGFS is not set
+CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
+# CONFIG_IIO_INTERRUPT_TRIGGER is not set
+# CONFIG_IIO_MUX is not set
+# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
+# CONFIG_IIO_SIMPLE_DUMMY is not set
+# CONFIG_IIO_SSP_SENSORHUB is not set
+# CONFIG_IIO_ST_ACCEL_3AXIS is not set
+# CONFIG_IIO_ST_GYRO_3AXIS is not set
+# CONFIG_IIO_ST_LSM6DSX is not set
+# CONFIG_IIO_ST_MAGN_3AXIS is not set
+# CONFIG_IIO_ST_PRESS is not set
+# CONFIG_IIO_SW_DEVICE is not set
+# CONFIG_IIO_SW_TRIGGER is not set
+# CONFIG_IIO_SYSFS_TRIGGER is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMAGE_CMDLINE_HACK is not set
+# CONFIG_IMGPDC_WDT is not set
+# CONFIG_IMG_MDC_DMA is not set
+# CONFIG_IMX7D_ADC is not set
+# CONFIG_IMX_IPUV3_CORE is not set
+# CONFIG_IMX_THERMAL is not set
+# CONFIG_INA2XX_ADC is not set
+CONFIG_INET=y
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_UDP_DIAG is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_CMA3000 is not set
+# CONFIG_INPUT_DRV260X_HAPTICS is not set
+# CONFIG_INPUT_DRV2665_HAPTICS is not set
+# CONFIG_INPUT_DRV2667_HAPTICS is not set
+# CONFIG_INPUT_E3X0_BUTTON is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_BEEPER is not set
+# CONFIG_INPUT_GPIO_DECODER is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
+# CONFIG_INPUT_IMS_PCU is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_KXTJ9 is not set
+# CONFIG_INPUT_LEDS is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MPU3050 is not set
+# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_PWM_BEEPER is not set
+# CONFIG_INPUT_PWM_VIBRA is not set
+# CONFIG_INPUT_REGULATOR_HAPTIC is not set
+# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
+# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
+# CONFIG_INPUT_TWL4030_VIBRA is not set
+# CONFIG_INPUT_TWL6040_VIBRA is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INT340X_THERMAL is not set
+# CONFIG_INTEL_CHT_INT33FE is not set
+# CONFIG_INTEL_HID_EVENT is not set
+# CONFIG_INTEL_IDLE is not set
+# CONFIG_INTEL_IDMA64 is not set
+# CONFIG_INTEL_IOATDMA is not set
+# CONFIG_INTEL_ISH_HID is not set
+# CONFIG_INTEL_MEI is not set
+# CONFIG_INTEL_MEI_ME is not set
+# CONFIG_INTEL_MEI_TXE is not set
+# CONFIG_INTEL_MIC_CARD is not set
+# CONFIG_INTEL_MIC_HOST is not set
+# CONFIG_INTEL_MID_PTI is not set
+# CONFIG_INTEL_OAKTRAIL is not set
+# CONFIG_INTEL_PMC_CORE is not set
+# CONFIG_INTEL_PUNIT_IPC is not set
+# CONFIG_INTEL_RST is not set
+# CONFIG_INTEL_SMARTCONNECT is not set
+# CONFIG_INTEL_SOC_PMIC is not set
+# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
+# CONFIG_INTEL_TH is not set
+# CONFIG_INTEL_VBTN is not set
+# CONFIG_INTEL_XWAY_PHY is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_INV_MPU6050_I2C is not set
+# CONFIG_INV_MPU6050_IIO is not set
+# CONFIG_INV_MPU6050_SPI is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_IOSCHED_BFQ is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IO_STRICT_DEVMEM=y
+# CONFIG_IP17XX_PHY is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_RPFILTER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_MATCH_SRH is not set
+# CONFIG_IP6_NF_NAT is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_SECURITY is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
+# CONFIG_IPACK_BUS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_FOU is not set
+# CONFIG_IPV6_FOU_TUNNEL is not set
+# CONFIG_IPV6_ILA is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_SEG6_HMAC is not set
+# CONFIG_IPV6_SEG6_LWTUNNEL is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_SIT_6RD is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_VTI is not set
+# CONFIG_IPVLAN is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200 is not set
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_IPX is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_FIB_TRIE_STATS is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_RPFILTER is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_SYNPROXY is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_IP_SET is not set
+# CONFIG_IP_SET_HASH_IPMAC is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IRDA is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_IRQ_ALL_CPUS is not set
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+# CONFIG_IRQ_POLL is not set
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_IR_GPIO_CIR is not set
+# CONFIG_IR_HIX5HD2 is not set
+# CONFIG_IR_IGORPLUGUSB is not set
+# CONFIG_IR_IGUANA is not set
+# CONFIG_IR_IMG is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECODER is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_REDRAT3 is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_IR_TTUSBIR is not set
+# CONFIG_ISA_BUS is not set
+# CONFIG_ISA_BUS_API is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_ISCSI_TCP is not set
+CONFIG_ISDN=y
+# CONFIG_ISDN_AUDIO is not set
+# CONFIG_ISDN_CAPI is not set
+# CONFIG_ISDN_CAPI_CAPIDRV is not set
+# CONFIG_ISDN_DIVERSION is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
+# CONFIG_ISDN_DRV_GIGASET is not set
+# CONFIG_ISDN_DRV_HISAX is not set
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_LOOP is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_ISL29125 is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_ISS4xx is not set
+# CONFIG_ITG3200 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IXGB is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_LZMA=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_ZLIB is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JME is not set
+CONFIG_JOLIET=y
+# CONFIG_JSA1212 is not set
+# CONFIG_JUMP_LABEL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_BASE_RELATIVE=y
+# CONFIG_KALLSYMS_UNCOMPRESSED is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KASAN is not set
+# CONFIG_KCOV is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_CAT is not set
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_LZ4 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_KERNEL_XZ=y
+CONFIG_KERNFS=y
+# CONFIG_KEXEC is not set
+# CONFIG_KEXEC_FILE is not set
+# CONFIG_KEYBOARD_ADC is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_BCM is not set
+# CONFIG_KEYBOARD_CAP11XX is not set
+# CONFIG_KEYBOARD_DLINK_DIR685 is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_SAMSUNG is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYS is not set
+# CONFIG_KEY_DH_OPERATIONS is not set
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_KMX61 is not set
+# CONFIG_KPROBES is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_KS7010 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSM is not set
+# CONFIG_KSZ884X_PCI is not set
+CONFIG_KUSER_HELPERS=y
+# CONFIG_KVM_AMD is not set
+# CONFIG_KVM_GUEST is not set
+# CONFIG_KVM_INTEL is not set
+# CONFIG_KXCJK1013 is not set
+# CONFIG_KXSD9 is not set
+# CONFIG_L2TP is not set
+# CONFIG_L2TP_ETH is not set
+# CONFIG_L2TP_IP is not set
+# CONFIG_L2TP_V3 is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_LANTIQ is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+CONFIG_LBDAF=y
+# CONFIG_LCD_AMS369FG06 is not set
+# CONFIG_LCD_HX8357 is not set
+# CONFIG_LCD_ILI922X is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LMS501KF03 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y
+# CONFIG_LEDS_BCM6328 is not set
+# CONFIG_LEDS_BCM6358 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_BLINKM is not set
+CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS_FLASH is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_INTEL_SS4200 is not set
+# CONFIG_LEDS_IS31FL319X is not set
+# CONFIG_LEDS_IS31FL32XX is not set
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM355x is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP3952 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_MLXCPLD is not set
+# CONFIG_LEDS_NIC78BX is not set
+# CONFIG_LEDS_NS2 is not set
+# CONFIG_LEDS_OT200 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_SYSCON is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_TLC591XX is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
+# CONFIG_LEDS_TRIGGER_CPU is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_LEDS_TRIGGER_DISK is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MTD is not set
+CONFIG_LEDS_TRIGGER_NETDEV=y
+# CONFIG_LEDS_TRIGGER_ONESHOT is not set
+# CONFIG_LEDS_TRIGGER_PANIC is not set
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_USER is not set
+# CONFIG_LED_TRIGGER_PHY is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LGUEST is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_LIB80211_CRYPT_CCMP is not set
+# CONFIG_LIB80211_CRYPT_TKIP is not set
+# CONFIG_LIB80211_CRYPT_WEP is not set
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_LIBIPW_DEBUG is not set
+# CONFIG_LIBNVDIMM is not set
+# CONFIG_LIDAR_LITE_V2 is not set
+# CONFIG_LIQUIDIO is not set
+# CONFIG_LIQUIDIO_VF is not set
+# CONFIG_LIRC_STAGING is not set
+# CONFIG_LIS3L02DQ is not set
+# CONFIG_LKDTM is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_LMP91000 is not set
+# CONFIG_LNET is not set
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_LOCKD is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_LOCKD_V4=y
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_LOGFS is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIWHEELS_FF is not set
+# CONFIG_LOGO is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
+# CONFIG_LOONGSON_MC146818 is not set
+# CONFIG_LPC_ICH is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LTC2471 is not set
+# CONFIG_LTC2485 is not set
+# CONFIG_LTC2497 is not set
+# CONFIG_LTC2632 is not set
+# CONFIG_LTE_GDM724X is not set
+# CONFIG_LTPC is not set
+# CONFIG_LTR501 is not set
+# CONFIG_LUSTRE_FS is not set
+# CONFIG_LWTUNNEL is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_LZ4HC_COMPRESS is not set
+# CONFIG_LZ4_COMPRESS is not set
+# CONFIG_LZ4_DECOMPRESS is not set
+CONFIG_LZMA_COMPRESS=y
+CONFIG_LZMA_DECOMPRESS=y
+# CONFIG_LZO_COMPRESS is not set
+# CONFIG_LZO_DECOMPRESS is not set
+# CONFIG_M62332 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
+# CONFIG_MACB is not set
+# CONFIG_MACH_ASM9260 is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_INGENIC is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_JZ4740 is not set
+# CONFIG_MACH_LOONGSON32 is not set
+# CONFIG_MACH_LOONGSON64 is not set
+# CONFIG_MACH_PIC32 is not set
+# CONFIG_MACH_PISTACHIO is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MACH_XILFPGA is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MACSEC is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MACVTAP is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MAG3110 is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+# CONFIG_MAGIC_SYSRQ_SERIAL is not set
+# CONFIG_MAILBOX is not set
+# CONFIG_MANDATORY_FILE_LOCKING is not set
+# CONFIG_MANGLE_BOOTARGS is not set
+# CONFIG_MARVELL_10G_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MAX1027 is not set
+# CONFIG_MAX11100 is not set
+# CONFIG_MAX1118 is not set
+# CONFIG_MAX1363 is not set
+# CONFIG_MAX30100 is not set
+# CONFIG_MAX30102 is not set
+# CONFIG_MAX44000 is not set
+# CONFIG_MAX517 is not set
+# CONFIG_MAX5481 is not set
+# CONFIG_MAX5487 is not set
+# CONFIG_MAX5821 is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MAX9611 is not set
+# CONFIG_MAXIM_THERMOCOUPLE is not set
+CONFIG_MAY_USE_DEVLINK=y
+# CONFIG_MC3230 is not set
+# CONFIG_MCB is not set
+# CONFIG_MCP320X is not set
+# CONFIG_MCP3422 is not set
+# CONFIG_MCP4131 is not set
+# CONFIG_MCP4531 is not set
+# CONFIG_MCP4725 is not set
+# CONFIG_MCP4922 is not set
+# CONFIG_MCPM is not set
+# CONFIG_MD is not set
+# CONFIG_MDIO_BCM_UNIMAC is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MDIO_DEVICE is not set
+# CONFIG_MDIO_HISI_FEMAC is not set
+# CONFIG_MDIO_OCTEON is not set
+# CONFIG_MDIO_THUNDER is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
+# CONFIG_MEDIA_ATTACH is not set
+# CONFIG_MEDIA_CAMERA_SUPPORT is not set
+# CONFIG_MEDIA_CEC_SUPPORT is not set
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
+# CONFIG_MEDIA_PCI_SUPPORT is not set
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_RC_SUPPORT is not set
+# CONFIG_MEDIA_SDR_SUPPORT is not set
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+# CONFIG_MEDIA_SUPPORT is not set
+# CONFIG_MEDIA_USB_SUPPORT is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+CONFIG_MEMBARRIER=y
+# CONFIG_MEMORY is not set
+# CONFIG_MEMORY_FAILURE is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MEMTEST is not set
+# CONFIG_MEN_A21_WDT is not set
+# CONFIG_MESON_SM is not set
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_ACT8945A is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_ATMEL_FLEXCOM is not set
+# CONFIG_MFD_ATMEL_HLCDC is not set
+# CONFIG_MFD_AXP20X is not set
+# CONFIG_MFD_AXP20X_I2C is not set
+# CONFIG_MFD_BCM590XX is not set
+# CONFIG_MFD_BD9571MWV is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_CPCAP is not set
+# CONFIG_MFD_CROS_EC is not set
+# CONFIG_MFD_CS5535 is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9062 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DA9150 is not set
+# CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_EXYNOS_LPASS is not set
+# CONFIG_MFD_HI6421_PMIC is not set
+# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_LP3943 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_MAX14577 is not set
+# CONFIG_MFD_MAX77620 is not set
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_MENF21BMC is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_OMAP_USB_HOST is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_PM8921_CORE is not set
+# CONFIG_MFD_PM8XXX is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_RETU is not set
+# CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_RN5T618 is not set
+# CONFIG_MFD_RT5033 is not set
+# CONFIG_MFD_RTSX_PCI is not set
+# CONFIG_MFD_RTSX_USB is not set
+# CONFIG_MFD_SEC_CORE is not set
+# CONFIG_MFD_SI476X_CORE is not set
+# CONFIG_MFD_SKY81452 is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_SYSCON is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_TI_LMU is not set
+# CONFIG_MFD_TI_LP873X is not set
+# CONFIG_MFD_TI_LP87565 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TPS65086 is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TPS65218 is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_TPS68470 is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_MFD_VIPERBOARD is not set
+# CONFIG_MFD_VX855 is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_MICROCHIP_KSZ is not set
+# CONFIG_MICROCHIP_PHY is not set
+# CONFIG_MICROSEMI_PHY is not set
+# CONFIG_MIGRATION is not set
+CONFIG_MII=y
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_MIPS_ALCHEMY is not set
+# CONFIG_MIPS_CDMM is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_FPU_EMULATOR is not set
+# CONFIG_MIPS_GENERIC is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_O32_FP64_SUPPORT is not set
+# CONFIG_MIPS_PARAVIRT is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_MIPS_SEAD3 is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_MISDN is not set
+# CONFIG_MISDN_AVMFRITZ is not set
+# CONFIG_MISDN_HFCPCI is not set
+# CONFIG_MISDN_HFCUSB is not set
+# CONFIG_MISDN_INFINEON is not set
+# CONFIG_MISDN_NETJET is not set
+# CONFIG_MISDN_SPEEDFAX is not set
+# CONFIG_MISDN_W6692 is not set
+# CONFIG_MKISS is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX5_CORE is not set
+# CONFIG_MLX90614 is not set
+# CONFIG_MLXFW is not set
+# CONFIG_MLXSW_CORE is not set
+# CONFIG_MLX_CPLD_PLATFORM is not set
+# CONFIG_MLX_PLATFORM is not set
+# CONFIG_MMA7455_I2C is not set
+# CONFIG_MMA7455_SPI is not set
+# CONFIG_MMA7660 is not set
+# CONFIG_MMA8452 is not set
+# CONFIG_MMA9551 is not set
+# CONFIG_MMA9553 is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC35240 is not set
+# CONFIG_MMC_ARMMMCI is not set
+# CONFIG_MMC_AU1X is not set
+# CONFIG_MMC_BLOCK is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_MMC_BLOCK_MINORS=8
+# CONFIG_MMC_CAVIUM_THUNDERX is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_MTK is not set
+# CONFIG_MMC_MVSDIO is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SDHCI_ACPI is not set
+# CONFIG_MMC_SDHCI_BCM_KONA is not set
+# CONFIG_MMC_SDHCI_CADENCE is not set
+# CONFIG_MMC_SDHCI_F_SDH30 is not set
+# CONFIG_MMC_SDHCI_IPROC is not set
+# CONFIG_MMC_SDHCI_MSM is not set
+# CONFIG_MMC_SDHCI_OF_ARASAN is not set
+# CONFIG_MMC_SDHCI_OF_AT91 is not set
+# CONFIG_MMC_SDHCI_OF_ESDHC is not set
+# CONFIG_MMC_SDHCI_OF_HLWD is not set
+# CONFIG_MMC_SDHCI_PXAV2 is not set
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+# CONFIG_MMC_SDHCI_XENON is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_TEST is not set
+# CONFIG_MMC_TOSHIBA_PCI is not set
+# CONFIG_MMC_USDHI6ROL0 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_MMU=y
+CONFIG_MODULES=y
+# CONFIG_MODULE_COMPRESS is not set
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SIG is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULE_STRIPPED=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOST is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_ELAN_I2C is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_PS2_FOCALTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_MPL115 is not set
+# CONFIG_MPL115_I2C is not set
+# CONFIG_MPL115_SPI is not set
+# CONFIG_MPL3115 is not set
+# CONFIG_MPLS is not set
+# CONFIG_MPU3050_I2C is not set
+# CONFIG_MQ_IOSCHED_DEADLINE is not set
+# CONFIG_MQ_IOSCHED_KYBER is not set
+# CONFIG_MS5611 is not set
+# CONFIG_MS5637 is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_MSI_LAPTOP is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DOCG3 is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LATCH_ADDR is not set
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_LPDDR2_NVM is not set
+# CONFIG_MTD_M25P80 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MCHP23K256 is not set
+# CONFIG_MTD_MT81xx_NOR is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_AMS_DELTA is not set
+# CONFIG_MTD_NAND_AR934X is not set
+# CONFIG_MTD_NAND_AR934X_HW_ECC is not set
+# CONFIG_MTD_NAND_ATMEL is not set
+# CONFIG_MTD_NAND_AU1550 is not set
+# CONFIG_MTD_NAND_BCH is not set
+# CONFIG_MTD_NAND_BF5XX is not set
+# CONFIG_MTD_NAND_BRCMNAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_CM_X270 is not set
+# CONFIG_MTD_NAND_CS553X is not set
+# CONFIG_MTD_NAND_DAVINCI is not set
+# CONFIG_MTD_NAND_DENALI is not set
+# CONFIG_MTD_NAND_DENALI_DT is not set
+# CONFIG_MTD_NAND_DENALI_PCI is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_DOCG4 is not set
+# CONFIG_MTD_NAND_ECC is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_NAND_FSL_IFC is not set
+# CONFIG_MTD_NAND_FSL_UPM is not set
+# CONFIG_MTD_NAND_FSMC is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_GPMI_NAND is not set
+# CONFIG_MTD_NAND_HISI504 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_JZ4740 is not set
+# CONFIG_MTD_NAND_MPC5121_NFC is not set
+# CONFIG_MTD_NAND_MTK is not set
+# CONFIG_MTD_NAND_MXC is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_NDFC is not set
+# CONFIG_MTD_NAND_NUC900 is not set
+# CONFIG_MTD_NAND_OMAP2 is not set
+# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
+# CONFIG_MTD_NAND_ORION is not set
+# CONFIG_MTD_NAND_PASEMI is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_PXA3xx is not set
+# CONFIG_MTD_NAND_RB4XX is not set
+# CONFIG_MTD_NAND_RB750 is not set
+# CONFIG_MTD_NAND_RICOH is not set
+# CONFIG_MTD_NAND_S3C2410 is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_SH_FLCTL is not set
+# CONFIG_MTD_NAND_SOCRATES is not set
+# CONFIG_MTD_NAND_TMIO is not set
+# CONFIG_MTD_NAND_TXX9NDFMC is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_PARTITIONED_MASTER is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PCMCIA is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
+# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_SPINAND_MT29F is not set
+# CONFIG_MTD_SPI_NOR is not set
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096
+CONFIG_MTD_SPLIT=y
+# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set
+# CONFIG_MTD_SPLIT_EVA_FW is not set
+# CONFIG_MTD_SPLIT_FIRMWARE is not set
+CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
+# CONFIG_MTD_SPLIT_FIT_FW is not set
+# CONFIG_MTD_SPLIT_JIMAGE_FW is not set
+# CONFIG_MTD_SPLIT_LZMA_FW is not set
+# CONFIG_MTD_SPLIT_MINOR_FW is not set
+# CONFIG_MTD_SPLIT_SEAMA_FW is not set
+CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
+CONFIG_MTD_SPLIT_SUPPORT=y
+# CONFIG_MTD_SPLIT_TPLINK_FW is not set
+# CONFIG_MTD_SPLIT_TRX_FW is not set
+# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
+# CONFIG_MTD_SPLIT_WRGG_FW is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SWAP is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_MTD_UIMAGE_SPLIT is not set
+CONFIG_MULTIUSER=y
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_MVMDIO is not set
+# CONFIG_MVNETA_BM is not set
+# CONFIG_MVSW61XX_PHY is not set
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MV_XOR_V2 is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWL8K is not set
+# CONFIG_MXC4005 is not set
+# CONFIG_MXC6255 is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NAU7802 is not set
+# CONFIG_NBPFAXI_DMA is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2000 is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NEC_MARKEINS is not set
+CONFIG_NET=y
+# CONFIG_NETCONSOLE is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETFILTER is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_INGRESS is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_ACCT is not set
+# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_BPF is not set
+# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ECN is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_LOG is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETLINK_DIAG is not set
+# CONFIG_NETLINK_MMAP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NETROM is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_BPF is not set
+# CONFIG_NET_ACT_CSUM is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IFE is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_SAMPLE is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+# CONFIG_NET_ACT_SKBMOD is not set
+# CONFIG_NET_ACT_TUNNEL_KEY is not set
+# CONFIG_NET_ACT_VLAN is not set
+CONFIG_NET_CADENCE=y
+# CONFIG_NET_CALXEDA_XGMAC is not set
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_BPF is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FLOWER is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_NET_CLS_MATCHALL is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+CONFIG_NET_CORE=y
+# CONFIG_NET_DEVLINK is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_NET_DSA_BCM_SF2 is not set
+# CONFIG_NET_DSA_LOOP is not set
+# CONFIG_NET_DSA_MT7530 is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6171 is not set
+# CONFIG_NET_DSA_MV88E6352 is not set
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_QCA8K is not set
+# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
+# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_EMATCH_CANID is not set
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NET_FOU is not set
+# CONFIG_NET_FOU_IP_TUNNELS is not set
+# CONFIG_NET_IFE is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPVTI is not set
+# CONFIG_NET_IP_TUNNEL is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+# CONFIG_NET_L3_MASTER_DEV is not set
+# CONFIG_NET_MPLS_GSO is not set
+# CONFIG_NET_NCSI is not set
+# CONFIG_NET_NSH is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_NET_PTP_CLASSIFY is not set
+CONFIG_NET_RX_BUSY_POLL=y
+# CONFIG_NET_SB1000 is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CHOKE is not set
+# CONFIG_NET_SCH_CODEL is not set
+# CONFIG_NET_SCH_DEFAULT is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_FQ is not set
+CONFIG_NET_SCH_FQ_CODEL=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HHF is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_MQPRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PIE is not set
+# CONFIG_NET_SCH_PLUG is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_QFQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFB is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCTPPROBE is not set
+# CONFIG_NET_SWITCHDEV is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_TEAM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_NET_UDP_TUNNEL is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_NET_VENDOR_8390=y
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_NET_VENDOR_AGERE=y
+CONFIG_NET_VENDOR_ALACRITECH=y
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_NET_VENDOR_AMAZON=y
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_NET_VENDOR_AQUANTIA=y
+CONFIG_NET_VENDOR_ARC=y
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_NET_VENDOR_AURORA=y
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_NET_VENDOR_CAVIUM=y
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_NET_VENDOR_EZCHIP=y
+CONFIG_NET_VENDOR_FARADAY=y
+CONFIG_NET_VENDOR_FREESCALE=y
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_NET_VENDOR_HISILICON=y
+CONFIG_NET_VENDOR_HP=y
+CONFIG_NET_VENDOR_HUAWEI=y
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_NET_VENDOR_MICROCHIP=y
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NET_VENDOR_NETRONOME=y
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_NET_VENDOR_QUALCOMM=y
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_NET_VENDOR_RENESAS=y
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_NET_VENDOR_SAMSUNG=y
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_NET_VENDOR_SOLARFLARE=y
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_NET_VENDOR_SYNOPSYS=y
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_NET_VENDOR_TI=y
+CONFIG_NET_VENDOR_TOSHIBA=y
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_NET_VENDOR_XILINX=y
+CONFIG_NET_VENDOR_XIRCOM=y
+# CONFIG_NET_VRF is not set
+# CONFIG_NET_XGENE is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NFC is not set
+# CONFIG_NFP is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V2_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_FSCACHE is not set
+# CONFIG_NFS_SWAP is not set
+# CONFIG_NFS_V2 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFTL is not set
+# CONFIG_NFT_BRIDGE_META is not set
+# CONFIG_NFT_BRIDGE_REJECT is not set
+# CONFIG_NFT_DUP_IPV4 is not set
+# CONFIG_NFT_DUP_IPV6 is not set
+# CONFIG_NFT_FIB_IPV4 is not set
+# CONFIG_NFT_FIB_IPV6 is not set
+# CONFIG_NFT_FLOW_OFFLOAD is not set
+# CONFIG_NFT_OBJREF is not set
+# CONFIG_NFT_RT is not set
+# CONFIG_NFT_SET_BITMAP is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROCFS=y
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_SNMP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+# CONFIG_NF_CONNTRACK_ZONES is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NF_DUP_IPV4 is not set
+# CONFIG_NF_DUP_IPV6 is not set
+# CONFIG_NF_FLOW_TABLE is not set
+# CONFIG_NF_LOG_ARP is not set
+# CONFIG_NF_LOG_IPV4 is not set
+# CONFIG_NF_LOG_NETDEV is not set
+# CONFIG_NF_NAT is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IPV6 is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT_MASQUERADE_IPV4 is not set
+# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
+# CONFIG_NF_NAT_NEEDED is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_REJECT_IPV4 is not set
+# CONFIG_NF_REJECT_IPV6 is not set
+# CONFIG_NF_SOCKET_IPV4 is not set
+# CONFIG_NF_SOCKET_IPV6 is not set
+# CONFIG_NF_TABLES is not set
+# CONFIG_NF_TABLES_NETDEV is not set
+# CONFIG_NI65 is not set
+# CONFIG_NI903X_WDT is not set
+# CONFIG_NIC7018_WDT is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NIU is not set
+CONFIG_NLATTR=y
+# CONFIG_NLMON is not set
+# CONFIG_NLM_XLP_BOARD is not set
+# CONFIG_NLM_XLR_BOARD is not set
+# CONFIG_NLS is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+# CONFIG_NLS_UTF8 is not set
+CONFIG_NMI_LOG_BUF_SHIFT=13
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NO_BOOTMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NO_HZ_FULL is not set
+# CONFIG_NO_HZ_IDLE is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTB is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_NTP_PPS is not set
+# CONFIG_NVM is not set
+# CONFIG_NVMEM is not set
+# CONFIG_NVMEM_IMX_OCOTP is not set
+# CONFIG_NVME_FC is not set
+# CONFIG_NVME_TARGET is not set
+# CONFIG_NVRAM is not set
+# CONFIG_NV_TCO is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_N_GSM is not set
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_OBS600 is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OF_OVERLAY is not set
+# CONFIG_OF_UNITTEST is not set
+# CONFIG_OMAP2_DSS_DEBUG is not set
+# CONFIG_OMAP2_DSS_DEBUGFS is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP_OCP2SCP is not set
+# CONFIG_OMAP_USB2 is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_OPENVSWITCH is not set
+# CONFIG_OPROFILE is not set
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+# CONFIG_OPT3001 is not set
+# CONFIG_ORANGEFS_FS is not set
+# CONFIG_ORION_WATCHDOG is not set
+# CONFIG_OSF_PARTITION is not set
+CONFIG_OVERLAY_FS=y
+# CONFIG_OVERLAY_FS_INDEX is not set
+# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
+# CONFIG_OWL_LOADER is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_PA12203001 is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_DIAG is not set
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_PAGE_OWNER is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PALMAS_GPADC is not set
+# CONFIG_PANASONIC_LAPTOP is not set
+# CONFIG_PANEL is not set
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_PANIC_ON_OOPS_VALUE=1
+CONFIG_PANIC_TIMEOUT=1
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARAVIRT is not set
+# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_1284 is not set
+# CONFIG_PARPORT_AX88796 is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARASAN_CF is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CS5536 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IMX is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OCTEON_CF is not set
+# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC104 is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCH_DMA is not set
+# CONFIG_PCH_GBE is not set
+# CONFIG_PCH_PHUB is not set
+# CONFIG_PCI is not set
+# CONFIG_PCI200SYN is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCIE_ALTERA is not set
+# CONFIG_PCIE_ARMADA_8K is not set
+# CONFIG_PCIE_DPC is not set
+# CONFIG_PCIE_DW_PLAT is not set
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIE_IPROC is not set
+# CONFIG_PCIE_KIRIN is not set
+# CONFIG_PCIE_PTM is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
+# CONFIG_PCI_ENDPOINT is not set
+# CONFIG_PCI_ENDPOINT_TEST is not set
+# CONFIG_PCI_FTPCI100 is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_HISI is not set
+# CONFIG_PCI_HOST_GENERIC is not set
+# CONFIG_PCI_HOST_THUNDER_ECAM is not set
+# CONFIG_PCI_HOST_THUNDER_PEM is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_LAYERSCAPE is not set
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_PASID is not set
+# CONFIG_PCI_PRI is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_SW_SWITCHTEC is not set
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCI_XGENE is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PERCPU_STATS is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_EVENTS_AMD_POWER is not set
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PHY_CPCAP_USB is not set
+# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
+# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
+# CONFIG_PHY_PXA_28NM_HSIC is not set
+# CONFIG_PHY_PXA_28NM_USB2 is not set
+# CONFIG_PHY_QCOM_DWC3 is not set
+# CONFIG_PHY_SAMSUNG_USB2 is not set
+# CONFIG_PHY_XGENE is not set
+# CONFIG_PI433 is not set
+# CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_PID_NS is not set
+CONFIG_PINCONF=y
+# CONFIG_PINCTRL is not set
+# CONFIG_PINCTRL_AMD is not set
+# CONFIG_PINCTRL_EXYNOS is not set
+# CONFIG_PINCTRL_EXYNOS5440 is not set
+# CONFIG_PINCTRL_MCP23S08 is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
+CONFIG_PINCTRL_SINGLE=y
+# CONFIG_PINCTRL_SX150X is not set
+CONFIG_PINMUX=y
+# CONFIG_PKCS7_MESSAGE_PARSER is not set
+# CONFIG_PL320_MBOX is not set
+# CONFIG_PL330_DMA is not set
+# CONFIG_PLATFORM_MHU is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_PLIP is not set
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PM is not set
+# CONFIG_PMBUS is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PM_AUTOSLEEP is not set
+# CONFIG_PM_DEVFREQ is not set
+# CONFIG_PM_WAKELOCKS is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_TIMERS=y
+# CONFIG_POWERCAP is not set
+# CONFIG_POWER_AVS is not set
+# CONFIG_POWER_RESET is not set
+# CONFIG_POWER_RESET_BRCMKONA is not set
+# CONFIG_POWER_RESET_BRCMSTB is not set
+# CONFIG_POWER_RESET_GPIO is not set
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+# CONFIG_POWER_RESET_LTC2952 is not set
+# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
+# CONFIG_POWER_RESET_RESTART is not set
+# CONFIG_POWER_RESET_SYSCON is not set
+# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
+# CONFIG_POWER_RESET_VERSATILE is not set
+# CONFIG_POWER_RESET_XGENE is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PPC4xx_GPIO is not set
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
+# CONFIG_PPP is not set
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPS is not set
+# CONFIG_PPS_CLIENT_GPIO is not set
+# CONFIG_PPS_CLIENT_KTIMER is not set
+# CONFIG_PPS_CLIENT_LDISC is not set
+# CONFIG_PPS_CLIENT_PARPORT is not set
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_PPTP is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_PRINTK=y
+CONFIG_PRINTK_NMI=y
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
+# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PRISM2_USB is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_PROC_CHILDREN is not set
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_STRIPPED=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILING is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_PROVE_RCU_REPEATEDLY is not set
+# CONFIG_PSAMPLE is not set
+# CONFIG_PSB6970_PHY is not set
+# CONFIG_PSTORE is not set
+# CONFIG_PTP_1588_CLOCK is not set
+# CONFIG_PTP_1588_CLOCK_IXP46X is not set
+# CONFIG_PTP_1588_CLOCK_KVM is not set
+# CONFIG_PTP_1588_CLOCK_PCH is not set
+# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
+# CONFIG_PWM is not set
+# CONFIG_PWM_FSL_FTM is not set
+# CONFIG_PWM_PCA9685 is not set
+CONFIG_PWRSEQ_EMMC=y
+# CONFIG_PWRSEQ_SD8787 is not set
+CONFIG_PWRSEQ_SIMPLE=y
+# CONFIG_QCA7000 is not set
+# CONFIG_QCA7000_SPI is not set
+# CONFIG_QCA7000_UART is not set
+# CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
+# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
+# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
+# CONFIG_QCOM_HIDMA is not set
+# CONFIG_QCOM_HIDMA_MGMT is not set
+# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
+# CONFIG_QCOM_SPMI_IADC is not set
+# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
+# CONFIG_QCOM_SPMI_VADC is not set
+# CONFIG_QED is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_QORIQ_CPUFREQ is not set
+# CONFIG_QORIQ_THERMAL is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QUEUED_LOCK_STAT is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_QUOTA_DEBUG is not set
+# CONFIG_R3964 is not set
+# CONFIG_R6040 is not set
+# CONFIG_R8169 is not set
+# CONFIG_R8188EU is not set
+# CONFIG_R8712U is not set
+# CONFIG_R8723AU is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_RALINK is not set
+# CONFIG_RANDOM32_SELFTEST is not set
+# CONFIG_RAPIDIO is not set
+# CONFIG_RAS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RBTREE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_EQS_DEBUG is not set
+# CONFIG_RCU_EXPEDITE_BOOT is not set
+CONFIG_RCU_EXPERT=y
+CONFIG_RCU_FANOUT=32
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FAST_NO_HZ is not set
+CONFIG_RCU_KTHREAD_PRIO=0
+# CONFIG_RCU_NOCB_CPU is not set
+# CONFIG_RCU_PERF_TEST is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RC_ATI_REMOTE is not set
+# CONFIG_RC_CORE is not set
+# CONFIG_RC_DECODERS is not set
+# CONFIG_RC_LOOPBACK is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_RDS is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_LZ4 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_REFCOUNT_FULL is not set
+# CONFIG_REGMAP is not set
+# CONFIG_REGMAP_I2C is not set
+# CONFIG_REGMAP_MMIO is not set
+# CONFIG_REGMAP_SPI is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_ACT8865 is not set
+# CONFIG_REGULATOR_AD5398 is not set
+# CONFIG_REGULATOR_ANATOP is not set
+# CONFIG_REGULATOR_DA9210 is not set
+# CONFIG_REGULATOR_DA9211 is not set
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FAN53555 is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_GPIO is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_ISL9305 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_LP872X is not set
+# CONFIG_REGULATOR_LP8755 is not set
+# CONFIG_REGULATOR_LTC3589 is not set
+# CONFIG_REGULATOR_LTC3676 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_MAX8973 is not set
+# CONFIG_REGULATOR_MT6311 is not set
+# CONFIG_REGULATOR_PFUZE100 is not set
+# CONFIG_REGULATOR_PV88060 is not set
+# CONFIG_REGULATOR_PV88080 is not set
+# CONFIG_REGULATOR_PV88090 is not set
+# CONFIG_REGULATOR_PWM is not set
+# CONFIG_REGULATOR_TI_ABB is not set
+# CONFIG_REGULATOR_TPS51632 is not set
+# CONFIG_REGULATOR_TPS62360 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_TPS65132 is not set
+# CONFIG_REGULATOR_TPS6524X is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_VCTRL is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RELOCATABLE is not set
+# CONFIG_REMOTEPROC is not set
+# CONFIG_RESET_ATH79 is not set
+# CONFIG_RESET_BERLIN is not set
+# CONFIG_RESET_CONTROLLER is not set
+# CONFIG_RESET_IMX7 is not set
+# CONFIG_RESET_LANTIQ is not set
+# CONFIG_RESET_LPC18XX is not set
+# CONFIG_RESET_MESON is not set
+# CONFIG_RESET_PISTACHIO is not set
+# CONFIG_RESET_SOCFPGA is not set
+# CONFIG_RESET_STM32 is not set
+# CONFIG_RESET_SUNXI is not set
+# CONFIG_RESET_TEGRA_BPMP is not set
+# CONFIG_RESET_TI_SYSCON is not set
+# CONFIG_RESET_ZYNQ is not set
+# CONFIG_RFD_FTL is not set
+CONFIG_RFKILL=y
+# CONFIG_RFKILL_FULL is not set
+# CONFIG_RFKILL_GPIO is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_RFKILL_LEDS is not set
+# CONFIG_RFKILL_REGULATOR is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_RING_BUFFER_STARTUP_TEST is not set
+# CONFIG_RMI4_CORE is not set
+# CONFIG_RMNET is not set
+# CONFIG_ROCKCHIP_PHY is not set
+# CONFIG_ROCKER is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPR0521 is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+# CONFIG_RTC_DRV_ABB5ZES3 is not set
+# CONFIG_RTC_DRV_ABX80X is not set
+# CONFIG_RTC_DRV_ARMADA38X is not set
+# CONFIG_RTC_DRV_AU1XXX is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1302 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1307_CENTURY is not set
+# CONFIG_RTC_DRV_DS1307_HWMON is not set
+# CONFIG_RTC_DRV_DS1343 is not set
+# CONFIG_RTC_DRV_DS1347 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1685_FAMILY is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS2404 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_EP93XX is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_FTRTC010 is not set
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
+# CONFIG_RTC_DRV_HYM8563 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_ISL12057 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_MAX6916 is not set
+# CONFIG_RTC_DRV_MCP795 is not set
+# CONFIG_RTC_DRV_MOXART is not set
+# CONFIG_RTC_DRV_MPC5121 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_OMAP is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_PCF2127 is not set
+# CONFIG_RTC_DRV_PCF85063 is not set
+# CONFIG_RTC_DRV_PCF8523 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_RTC_DRV_PS3 is not set
+# CONFIG_RTC_DRV_PT7C4338 is not set
+# CONFIG_RTC_DRV_R7301 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_RTC7301 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+# CONFIG_RTC_DRV_RV8803 is not set
+# CONFIG_RTC_DRV_RX4581 is not set
+# CONFIG_RTC_DRV_RX6110 is not set
+# CONFIG_RTC_DRV_RX8010 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_SNVS is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_SUN6I is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_XGENE is not set
+# CONFIG_RTC_DRV_ZYNQMP is not set
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_SYSTOHC=y
+CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366RB_PHY is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366_SMI is not set
+# CONFIG_RTL8366_SMI_DEBUG_FS is not set
+# CONFIG_RTL8367B_PHY is not set
+# CONFIG_RTL8367_PHY is not set
+# CONFIG_RTLLIB is not set
+# CONFIG_RTL_CARDS is not set
+# CONFIG_RTS5208 is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_RXKAD=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SAMSUNG_LAPTOP is not set
+# CONFIG_SATA_ACARD_AHCI is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_AHCI_PLATFORM is not set
+# CONFIG_SATA_DWC is not set
+# CONFIG_SATA_FSL is not set
+# CONFIG_SATA_HIGHBANK is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_RCAR is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SBC_FITPC2_WATCHDOG is not set
+CONFIG_SBITMAP=y
+# CONFIG_SC92031 is not set
+# CONFIG_SCA3000 is not set
+# CONFIG_SCACHE_DEBUGFS is not set
+# CONFIG_SCC is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_MC is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCHED_SMT is not set
+# CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_SCR24X is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_BNX2X_FCOE is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CHELSIO_FCOE is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_CXGB4_ISCSI is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESAS2R is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HISI_SAS is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCI is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_LPFC is not set
+CONFIG_SCSI_MOD=y
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_MPT3SAS is not set
+# CONFIG_SCSI_MQ_DEFAULT is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVUMI is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_PMCRAID is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SMARTPQI is not set
+# CONFIG_SCSI_SNIC is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_UFSHCD is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_VIRTIO is not set
+# CONFIG_SCSI_WD719X is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_SECCOMP is not set
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_ACPI_POWER is not set
+# CONFIG_SENSORS_AD7314 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADC128D818 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_ADT7310 is not set
+# CONFIG_SENSORS_ADT7410 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ASPEED is not set
+# CONFIG_SENSORS_ATK0110 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DELL_SMM is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FAM15H_POWER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_FTSTEUTATES is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_G762 is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_GSC is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_HIH6130 is not set
+# CONFIG_SENSORS_HMC5843 is not set
+# CONFIG_SENSORS_HMC5843_I2C is not set
+# CONFIG_SENSORS_HMC5843_SPI is not set
+# CONFIG_SENSORS_HTU21 is not set
+# CONFIG_SENSORS_I5500 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_IIO_HWMON is not set
+# CONFIG_SENSORS_INA209 is not set
+# CONFIG_SENSORS_INA2XX is not set
+# CONFIG_SENSORS_INA3221 is not set
+# CONFIG_SENSORS_ISL29018 is not set
+# CONFIG_SENSORS_ISL29028 is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_K10TEMP is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95234 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LM95245 is not set
+# CONFIG_SENSORS_LTC2945 is not set
+# CONFIG_SENSORS_LTC2990 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4222 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4260 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX1668 is not set
+# CONFIG_SENSORS_MAX197 is not set
+# CONFIG_SENSORS_MAX31722 is not set
+# CONFIG_SENSORS_MAX31790 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6697 is not set
+# CONFIG_SENSORS_MCP3021 is not set
+# CONFIG_SENSORS_NCT6683 is not set
+# CONFIG_SENSORS_NCT6775 is not set
+# CONFIG_SENSORS_NCT7802 is not set
+# CONFIG_SENSORS_NCT7904 is not set
+# CONFIG_SENSORS_NSA320 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_POWR1220 is not set
+# CONFIG_SENSORS_PWM_FAN is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_SCH5636 is not set
+# CONFIG_SENSORS_SCH56XX_COMMON is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SHT3x is not set
+# CONFIG_SENSORS_SHTC1 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_STTS751 is not set
+# CONFIG_SENSORS_TC654 is not set
+# CONFIG_SENSORS_TC74 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP103 is not set
+# CONFIG_SENSORS_TMP108 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_SENSORS_VEXPRESS is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VIA_CPUTEMP is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_XGENE is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_ASPEED_VUART is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_DMA=y
+# CONFIG_SERIAL_8250_DW is not set
+# CONFIG_SERIAL_8250_EM is not set
+# CONFIG_SERIAL_8250_EXAR is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_FINTEK is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
+# CONFIG_SERIAL_8250_INGENIC is not set
+# CONFIG_SERIAL_8250_LPSS is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_MID is not set
+# CONFIG_SERIAL_8250_MOXA is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_RT288X is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_BCM63XX is not set
+# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_DEV_BUS is not set
+CONFIG_SERIAL_EARLYCON=y
+# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_PCH_UART is not set
+# CONFIG_SERIAL_RP2 is not set
+# CONFIG_SERIAL_SC16IS7XX is not set
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_SH_SCI is not set
+# CONFIG_SERIAL_STM32 is not set
+# CONFIG_SERIAL_ST_ASC is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_APBPS2 is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_GPIO_PS2 is not set
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_SUN4I_PS2 is not set
+# CONFIG_SFC is not set
+# CONFIG_SFC_FALCON is not set
+# CONFIG_SFI is not set
+# CONFIG_SGETMASK_SYSCALL is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SG_POOL is not set
+# CONFIG_SG_SPLIT is not set
+CONFIG_SHMEM=y
+# CONFIG_SH_ETH is not set
+# CONFIG_SH_TIMER_CMT is not set
+# CONFIG_SH_TIMER_MTU2 is not set
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_SI1145 is not set
+# CONFIG_SI7005 is not set
+# CONFIG_SI7020 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+CONFIG_SIGNALFD=y
+# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_SIMPLE_PM_BUS is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLABINFO=y
+# CONFIG_SLAB_FREELIST_HARDENED is not set
+# CONFIG_SLAB_FREELIST_RANDOM is not set
+CONFIG_SLAB_MERGE_DEFAULT=y
+# CONFIG_SLHC is not set
+# CONFIG_SLICOSS is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_SMARTJOYPLUS_FF is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMC9194 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_SND is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_ASIHPI is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_ATMEL_SOC is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AUDIO_GRAPH_CARD is not set
+# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BCD2000 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DESIGNWARE_I2S is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EDMA_SOC is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FIREWIRE is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
+CONFIG_SND_HDA_PREALLOC_SIZE=64
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_I2S_HI6210_I2S is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_ISA is not set
+# CONFIG_SND_KIRKWOOD_SOC is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_LOLA is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_MTS64 is not set
+# CONFIG_SND_MXS_SOC is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCM_TIMER is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_PORTMAN2X4 is not set
+# CONFIG_SND_POWERPC_SOC is not set
+# CONFIG_SND_PPC is not set
+CONFIG_SND_PROC_FS=y
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_SE6X is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SIMPLE_CARD is not set
+# CONFIG_SND_SIMPLE_SCU_CARD is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_ADAU1701 is not set
+# CONFIG_SND_SOC_ADAU1761_I2C is not set
+# CONFIG_SND_SOC_ADAU1761_SPI is not set
+# CONFIG_SND_SOC_ADAU7002 is not set
+# CONFIG_SND_SOC_AK4104 is not set
+# CONFIG_SND_SOC_AK4554 is not set
+# CONFIG_SND_SOC_AK4613 is not set
+# CONFIG_SND_SOC_AK4642 is not set
+# CONFIG_SND_SOC_AK5386 is not set
+# CONFIG_SND_SOC_ALC5623 is not set
+# CONFIG_SND_SOC_AMD_ACP is not set
+# CONFIG_SND_SOC_AU1XAUDIO is not set
+# CONFIG_SND_SOC_AU1XPSC is not set
+# CONFIG_SND_SOC_BT_SCO is not set
+# CONFIG_SND_SOC_CS35L32 is not set
+# CONFIG_SND_SOC_CS35L33 is not set
+# CONFIG_SND_SOC_CS35L34 is not set
+# CONFIG_SND_SOC_CS35L35 is not set
+# CONFIG_SND_SOC_CS4265 is not set
+# CONFIG_SND_SOC_CS4270 is not set
+# CONFIG_SND_SOC_CS4271 is not set
+# CONFIG_SND_SOC_CS4271_I2C is not set
+# CONFIG_SND_SOC_CS4271_SPI is not set
+# CONFIG_SND_SOC_CS42L42 is not set
+# CONFIG_SND_SOC_CS42L51_I2C is not set
+# CONFIG_SND_SOC_CS42L52 is not set
+# CONFIG_SND_SOC_CS42L56 is not set
+# CONFIG_SND_SOC_CS42L73 is not set
+# CONFIG_SND_SOC_CS42XX8_I2C is not set
+# CONFIG_SND_SOC_CS43130 is not set
+# CONFIG_SND_SOC_CS4349 is not set
+# CONFIG_SND_SOC_CS53L30 is not set
+# CONFIG_SND_SOC_DIO2125 is not set
+# CONFIG_SND_SOC_ES7134 is not set
+# CONFIG_SND_SOC_ES8316 is not set
+# CONFIG_SND_SOC_ES8328 is not set
+# CONFIG_SND_SOC_ES8328_I2C is not set
+# CONFIG_SND_SOC_ES8328_SPI is not set
+# CONFIG_SND_SOC_EUKREA_TLV320 is not set
+# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
+# CONFIG_SND_SOC_FSL_ASRC is not set
+# CONFIG_SND_SOC_FSL_ESAI is not set
+# CONFIG_SND_SOC_FSL_SAI is not set
+# CONFIG_SND_SOC_FSL_SPDIF is not set
+# CONFIG_SND_SOC_FSL_SSI is not set
+# CONFIG_SND_SOC_GTM601 is not set
+# CONFIG_SND_SOC_IMG is not set
+# CONFIG_SND_SOC_IMX_AUDMUX is not set
+# CONFIG_SND_SOC_IMX_ES8328 is not set
+# CONFIG_SND_SOC_IMX_SPDIF is not set
+# CONFIG_SND_SOC_IMX_WM8962 is not set
+# CONFIG_SND_SOC_INNO_RK3036 is not set
+# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set
+# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set
+# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set
+# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set
+# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set
+# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set
+# CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH is not set
+# CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH is not set
+# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set
+# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH is not set
+# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
+# CONFIG_SND_SOC_INTEL_SST is not set
+# CONFIG_SND_SOC_MAX98504 is not set
+# CONFIG_SND_SOC_MAX9860 is not set
+# CONFIG_SND_SOC_MAX98927 is not set
+# CONFIG_SND_SOC_MEDIATEK is not set
+# CONFIG_SND_SOC_MPC5200_AC97 is not set
+# CONFIG_SND_SOC_MPC5200_I2S is not set
+# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
+# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
+# CONFIG_SND_SOC_MT2701 is not set
+# CONFIG_SND_SOC_MT8173 is not set
+# CONFIG_SND_SOC_NAU8540 is not set
+# CONFIG_SND_SOC_NAU8810 is not set
+# CONFIG_SND_SOC_NAU8824 is not set
+# CONFIG_SND_SOC_PCM1681 is not set
+# CONFIG_SND_SOC_PCM1792A is not set
+# CONFIG_SND_SOC_PCM179X_I2C is not set
+# CONFIG_SND_SOC_PCM179X_SPI is not set
+# CONFIG_SND_SOC_PCM3168A_I2C is not set
+# CONFIG_SND_SOC_PCM3168A_SPI is not set
+# CONFIG_SND_SOC_PCM512x_I2C is not set
+# CONFIG_SND_SOC_PCM512x_SPI is not set
+# CONFIG_SND_SOC_QCOM is not set
+# CONFIG_SND_SOC_RT5616 is not set
+# CONFIG_SND_SOC_RT5631 is not set
+# CONFIG_SND_SOC_RT5677_SPI is not set
+# CONFIG_SND_SOC_SGTL5000 is not set
+# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
+# CONFIG_SND_SOC_SPDIF is not set
+# CONFIG_SND_SOC_SSM2602_I2C is not set
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+# CONFIG_SND_SOC_SSM4567 is not set
+# CONFIG_SND_SOC_STA32X is not set
+# CONFIG_SND_SOC_STA350 is not set
+# CONFIG_SND_SOC_STI_SAS is not set
+# CONFIG_SND_SOC_TAS2552 is not set
+# CONFIG_SND_SOC_TAS5086 is not set
+# CONFIG_SND_SOC_TAS571X is not set
+# CONFIG_SND_SOC_TAS5720 is not set
+# CONFIG_SND_SOC_TFA9879 is not set
+# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
+# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
+# CONFIG_SND_SOC_TLV320AIC31XX is not set
+# CONFIG_SND_SOC_TLV320AIC3X is not set
+# CONFIG_SND_SOC_TPA6130A2 is not set
+# CONFIG_SND_SOC_TS3A227E is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8523 is not set
+# CONFIG_SND_SOC_WM8524 is not set
+# CONFIG_SND_SOC_WM8580 is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8728 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8737 is not set
+# CONFIG_SND_SOC_WM8741 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8770 is not set
+# CONFIG_SND_SOC_WM8776 is not set
+# CONFIG_SND_SOC_WM8804_I2C is not set
+# CONFIG_SND_SOC_WM8804_SPI is not set
+# CONFIG_SND_SOC_WM8903 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8962 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8978 is not set
+# CONFIG_SND_SOC_WM8985 is not set
+# CONFIG_SND_SOC_XTFPGA_I2S is not set
+# CONFIG_SND_SOC_ZX_AUD96P22 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUN4I_CODEC is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_HIFACE is not set
+# CONFIG_SND_USB_POD is not set
+# CONFIG_SND_USB_PODHD is not set
+# CONFIG_SND_USB_TONEPORT is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_VARIAX is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_X86=y
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOCK_CGROUP_DATA is not set
+# CONFIG_SOC_AM33XX is not set
+# CONFIG_SOC_AM43XX is not set
+# CONFIG_SOC_BRCMSTB is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_SOC_DRA7XX is not set
+# CONFIG_SOC_HAS_OMAP2_SDRC is not set
+# CONFIG_SOC_OMAP5 is not set
+# CONFIG_SOC_TI is not set
+# CONFIG_SOFTLOCKUP_DETECTOR is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_OSS_CORE is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SP5100_TCO is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPARSE_IRQ is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_SPEAKUP is not set
+# CONFIG_SPI is not set
+# CONFIG_SPINLOCK_TEST is not set
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_AU1550 is not set
+# CONFIG_SPI_AXI_SPI_ENGINE is not set
+# CONFIG_SPI_BCM2835 is not set
+# CONFIG_SPI_BCM_QSPI is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_BUTTERFLY is not set
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_CADENCE_QUADSPI is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_FSL_DSPI is not set
+# CONFIG_SPI_FSL_ESPI is not set
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_GPIO_OLD is not set
+# CONFIG_SPI_IMG_SPFI is not set
+# CONFIG_SPI_LM70_LLP is not set
+# CONFIG_SPI_LOOPBACK_TEST is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_MPC52xx is not set
+# CONFIG_SPI_MPC52xx_PSC is not set
+# CONFIG_SPI_OCTEON is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_ORION is not set
+# CONFIG_SPI_PL022 is not set
+# CONFIG_SPI_PPC4xx is not set
+# CONFIG_SPI_PXA2XX is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_ROCKCHIP is not set
+# CONFIG_SPI_SC18IS602 is not set
+# CONFIG_SPI_SLAVE is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_THUNDERX is not set
+# CONFIG_SPI_TI_QSPI is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPI_TOPCLIFF_PCH is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_XWAY is not set
+# CONFIG_SPI_ZYNQMP_GQSPI is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_SPMI is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
+# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+# CONFIG_SQUASHFS_FILE_CACHE is not set
+CONFIG_SQUASHFS_FILE_DIRECT=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_LZ4 is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XATTR is not set
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_ZLIB is not set
+# CONFIG_SQUASHFS_ZSTD is not set
+# CONFIG_SRAM is not set
+# CONFIG_SRF04 is not set
+# CONFIG_SRF08 is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB_DRIVER_GPIO is not set
+# CONFIG_SSB_HOST_SOC is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+# CONFIG_STACKTRACE is not set
+CONFIG_STACKTRACE_SUPPORT=y
+# CONFIG_STACK_TRACER is not set
+# CONFIG_STACK_VALIDATION is not set
+CONFIG_STAGING=y
+# CONFIG_STAGING_BOARD is not set
+# CONFIG_STAGING_MEDIA is not set
+CONFIG_STANDALONE=y
+# CONFIG_STATIC_KEYS_SELFTEST is not set
+# CONFIG_STATIC_USERMODEHELPER is not set
+CONFIG_STDBINUTILS=y
+# CONFIG_STE10XP is not set
+# CONFIG_STE_MODEM_RPROC is not set
+# CONFIG_STK3310 is not set
+# CONFIG_STK8312 is not set
+# CONFIG_STK8BA50 is not set
+# CONFIG_STM is not set
+# CONFIG_STMMAC_ETH is not set
+# CONFIG_STMMAC_PCI is not set
+# CONFIG_STMMAC_PLATFORM is not set
+# CONFIG_STM_DUMMY is not set
+# CONFIG_STM_SOURCE_CONSOLE is not set
+CONFIG_STP=y
+# CONFIG_STREAM_PARSER is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_STRICT_MODULE_RWX=y
+# CONFIG_STRING_SELFTEST is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_STX104 is not set
+# CONFIG_SUN4I_GPADC is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUNXI_SRAM is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SURFACE_3_BUTTON is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_SUSPEND_SKIP_SYNC is not set
+CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
+# CONFIG_SWCONFIG_B53 is not set
+# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
+# CONFIG_SWCONFIG_LEDS is not set
+# CONFIG_SW_SYNC is not set
+# CONFIG_SX9500 is not set
+# CONFIG_SXGBE_ETH is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_SYNC_FILE is not set
+# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_SYSCON_REBOOT_MODE is not set
+CONFIG_SYSCTL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSFS=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_SYSTEMPORT is not set
+# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
+# CONFIG_SYSTEM_DATA_VERIFICATION is not set
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
+CONFIG_SYSTEM_TRUSTED_KEYS=""
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_T5403 is not set
+# CONFIG_TARGET_CORE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_TASKS_RCU is not set
+# CONFIG_TASK_XACCT is not set
+# CONFIG_TC35815 is not set
+# CONFIG_TCG_ATMEL is not set
+# CONFIG_TCG_CRB is not set
+# CONFIG_TCG_INFINEON is not set
+# CONFIG_TCG_NSC is not set
+# CONFIG_TCG_ST33_I2C is not set
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_TIS_I2C_ATMEL is not set
+# CONFIG_TCG_TIS_I2C_INFINEON is not set
+# CONFIG_TCG_TIS_I2C_NUVOTON is not set
+# CONFIG_TCG_TIS_SPI is not set
+# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
+# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TCG_VTPM_PROXY is not set
+# CONFIG_TCG_XEN is not set
+# CONFIG_TCIC is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BBR is not set
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CDG is not set
+CONFIG_TCP_CONG_CUBIC=y
+# CONFIG_TCP_CONG_DCTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_NV is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TCS3414 is not set
+# CONFIG_TCS3472 is not set
+# CONFIG_TEE is not set
+# CONFIG_TEGRA_AHB is not set
+# CONFIG_TEGRA_HOST1X is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TERANETICS_PHY is not set
+# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
+# CONFIG_TEST_BITMAP is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_HASH is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_KMOD is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_TEST_PRINTF is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_TEST_SORT is not set
+# CONFIG_TEST_STATIC_KEYS is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_SYSCTL is not set
+# CONFIG_TEST_UDELAY is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_UUID is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_EMULATION is not set
+# CONFIG_THERMAL_GOV_BANG_BANG is not set
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_THERMAL_WRITABLE_TRIPS is not set
+# CONFIG_THINKPAD_ACPI is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_THUNDERBOLT is not set
+# CONFIG_THUNDER_NIC_BGX is not set
+# CONFIG_THUNDER_NIC_PF is not set
+# CONFIG_THUNDER_NIC_RGX is not set
+# CONFIG_THUNDER_NIC_VF is not set
+# CONFIG_TICK_CPU_ACCOUNTING is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_TIMB_DMA is not set
+CONFIG_TIMERFD=y
+# CONFIG_TIMER_STATS is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TIPC is not set
+# CONFIG_TI_ADC081C is not set
+# CONFIG_TI_ADC0832 is not set
+# CONFIG_TI_ADC084S021 is not set
+# CONFIG_TI_ADC108S102 is not set
+# CONFIG_TI_ADC12138 is not set
+# CONFIG_TI_ADC128S052 is not set
+# CONFIG_TI_ADC161S626 is not set
+# CONFIG_TI_ADS1015 is not set
+# CONFIG_TI_ADS7950 is not set
+# CONFIG_TI_ADS8688 is not set
+# CONFIG_TI_AM335X_ADC is not set
+# CONFIG_TI_CPSW is not set
+# CONFIG_TI_CPSW_ALE is not set
+# CONFIG_TI_CPTS is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_TI_DAVINCI_CPDMA is not set
+# CONFIG_TI_DAVINCI_MDIO is not set
+# CONFIG_TI_ST is not set
+# CONFIG_TI_SYSCON_RESET is not set
+# CONFIG_TI_TLC4541 is not set
+# CONFIG_TLAN is not set
+# CONFIG_TLS is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_TMP006 is not set
+# CONFIG_TMP007 is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS_XATTR=y
+# CONFIG_TOPSTAR_LAPTOP is not set
+# CONFIG_TORTURE_TEST is not set
+# CONFIG_TOSHIBA_HAPS is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
+# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_EGALAX is not set
+# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
+# CONFIG_TOUCHSCREEN_EKTF2127 is not set
+# CONFIG_TOUCHSCREEN_ELAN is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_FT6236 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GOODIX is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_ILI210X is not set
+# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MAX11801 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MMS114 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_PIXCIR is not set
+# CONFIG_TOUCHSCREEN_RM_TS is not set
+# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
+# CONFIG_TOUCHSCREEN_SILEAD is not set
+# CONFIG_TOUCHSCREEN_SIS_I2C is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_STMFTS is not set
+# CONFIG_TOUCHSCREEN_SUR40 is not set
+# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
+# CONFIG_TOUCHSCREEN_SX8654 is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_TOUCHSCREEN_TSC2004 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_ZET6223 is not set
+# CONFIG_TOUCHSCREEN_ZFORCE is not set
+# CONFIG_TPL0102 is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TRACEPOINT_BENCHMARK is not set
+# CONFIG_TRACER_SNAPSHOT is not set
+# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_TRACE_EVAL_MAP_FILE is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_TRACE_SINK is not set
+# CONFIG_TRACING_EVENTS_GPIO is not set
+CONFIG_TRACING_SUPPORT=y
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_TRIM_UNUSED_KSYMS is not set
+# CONFIG_TRUSTED_KEYS is not set
+# CONFIG_TSL2583 is not set
+# CONFIG_TSL2x7x is not set
+# CONFIG_TSL4531 is not set
+# CONFIG_TSYS01 is not set
+# CONFIG_TSYS02D is not set
+# CONFIG_TTPCI_EEPROM is not set
+CONFIG_TTY=y
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_TUN is not set
+# CONFIG_TUN_VNET_CROSS_LE is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_TWL6030_GPADC is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_TYPEC_TCPM is not set
+# CONFIG_TYPEC_UCSI is not set
+# CONFIG_TYPHOON is not set
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_UBIFS_ATIME_SUPPORT is not set
+# CONFIG_UBIFS_FS_ENCRYPTION is not set
+CONFIG_UBIFS_FS_FORMAT4=y
+# CONFIG_UBIFS_FS_SECURITY is not set
+# CONFIG_UBSAN is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_UCSI is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UHID is not set
+CONFIG_UID16=y
+# CONFIG_UIO is not set
+# CONFIG_ULTRA is not set
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_UNIX=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_UNIX_DIAG is not set
+# CONFIG_UNMAP_KERNEL_AT_EL0 is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_UPROBES is not set
+# CONFIG_UPROBE_EVENT is not set
+# CONFIG_US5182D is not set
+# CONFIG_USB is not set
+# CONFIG_USBIP_CORE is not set
+CONFIG_USBIP_VHCI_HC_PORTS=8
+CONFIG_USBIP_VHCI_NR_HCS=1
+# CONFIG_USBIP_VUDC is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_ALI_M5632=y
+# CONFIG_USB_AMD5536UDC is not set
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_BDC_UDC is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_CHAOSKEY is not set
+# CONFIG_USB_CHIPIDEA is not set
+# CONFIG_USB_CONFIGFS is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_DEFAULT_PERSIST=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DUMMY_HCD is not set
+# CONFIG_USB_DWC2 is not set
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_DUAL_ROLE is not set
+# CONFIG_USB_DWC2_HOST is not set
+# CONFIG_USB_DWC2_PERIPHERAL is not set
+# CONFIG_USB_DWC3 is not set
+# CONFIG_USB_DWC3_EXYNOS is not set
+# CONFIG_USB_DWC3_KEYSTONE is not set
+# CONFIG_USB_DWC3_OF_SIMPLE is not set
+# CONFIG_USB_DWC3_PCI is not set
+# CONFIG_USB_DWC3_QCOM is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_EG20T is not set
+# CONFIG_USB_EHCI_ATH79 is not set
+# CONFIG_USB_EHCI_HCD_AT91 is not set
+# CONFIG_USB_EHCI_HCD_OMAP is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_EHCI_MSM is not set
+# CONFIG_USB_EHCI_MV is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_EZUSB_FX2 is not set
+# CONFIG_USB_FOTG210_HCD is not set
+# CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_FSL_USB2 is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FUSB300 is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+CONFIG_USB_GADGET_VBUS_DRAW=2
+# CONFIG_USB_GADGET_XILINX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GOKU is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_GR_UDC is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_DTCS033 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_JL2005BCD is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+# CONFIG_USB_GSPCA_KONICA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_NW80X is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SE401 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA1528 is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ930X is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STK1135 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TOPRO is not set
+# CONFIG_USB_GSPCA_TOUPTEK is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_VICAM is not set
+# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_G_ACM_MS is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_WEBCAM is not set
+# CONFIG_USB_HCD_TEST_MODE is not set
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HSIC_USB3503 is not set
+# CONFIG_USB_HSIC_USB4604 is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_HUB_USB251XB is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760 is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_LAN78XX is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
+# CONFIG_USB_LED_TRIG is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LINK_LAYER_TEST is not set
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_MAX3421_HCD is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_MSM_OTG is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_MV_U3D is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_MXS_PHY is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_NET2280 is not set
+# CONFIG_USB_NET_AX88179_178A is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_CDC_MBIM is not set
+# CONFIG_USB_NET_CDC_NCM is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_CH9200 is not set
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_DRIVERS is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_QMI_WWAN is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_SR9700 is not set
+# CONFIG_USB_NET_SR9800 is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_PCI is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PHY is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_PXA27X is not set
+# CONFIG_USB_R8A66597 is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RCAR_PHY is not set
+# CONFIG_USB_RENESAS_USBHS is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_RTL8152 is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_F81232 is not set
+# CONFIG_USB_SERIAL_F8153X is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_METRO is not set
+# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MXUPORT is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QT2 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SIMPLE is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_SSU100 is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_UPD78F0730 is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_WISHBONE is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_XSENS_MT is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SNP_UDC_PLAT is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TMC is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_USB_ULPI_BUS is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USS720 is not set
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_VL600 is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USELIB is not set
+# CONFIG_USERFAULTFD is not set
+# CONFIG_USE_OF is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_UWB is not set
+# CONFIG_U_SERIAL_CONSOLE is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_V4L_TEST_DRIVERS is not set
+# CONFIG_VCNL4000 is not set
+# CONFIG_VDSO is not set
+# CONFIG_VEML6070 is not set
+# CONFIG_VETH is not set
+# CONFIG_VEXPRESS_CONFIG is not set
+# CONFIG_VF610_ADC is not set
+# CONFIG_VF610_DAC is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_VGA_SWITCHEROO is not set
+# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
+# CONFIG_VHOST_NET is not set
+# CONFIG_VHOST_VSOCK is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_ADV7183 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV7393 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_AK881X is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CS3308 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DM6446_CCDC is not set
+# CONFIG_VIDEO_DT3155 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_GO7007 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IR_I2C is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_ML86V7667 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MT9M111 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+# CONFIG_VIDEO_OMAP2_VOUT is not set
+# CONFIG_VIDEO_OV2640 is not set
+# CONFIG_VIDEO_OV2659 is not set
+# CONFIG_VIDEO_OV6650 is not set
+# CONFIG_VIDEO_OV7640 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA6588 is not set
+# CONFIG_VIDEO_SAA6752HS is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_VIDEO_SONY_BTF_MPX is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_THS8200 is not set
+# CONFIG_VIDEO_TIMBERDALE is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TM6000 is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_TW2804 is not set
+# CONFIG_VIDEO_TW9903 is not set
+# CONFIG_VIDEO_TW9906 is not set
+# CONFIG_VIDEO_UDA1342 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBTV is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_VIDEO_V4L2 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_VS6624 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIRTIO_BALLOON is not set
+# CONFIG_VIRTIO_BLK_SCSI is not set
+# CONFIG_VIRTIO_INPUT is not set
+# CONFIG_VIRTIO_MMIO is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
+# CONFIG_VIRT_DRIVERS is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_VL6180 is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_VLAN_8021Q_MVRP is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMWARE_PVSCSI is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VOP_BUS is not set
+# CONFIG_VORTEX is not set
+# CONFIG_VSOCKETS is not set
+# CONFIG_VT is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_VXGE is not set
+# CONFIG_VXLAN is not set
+# CONFIG_VZ89X is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_CON is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_W1_SLAVE_DS2405 is not set
+# CONFIG_W1_SLAVE_DS2406 is not set
+# CONFIG_W1_SLAVE_DS2408 is not set
+# CONFIG_W1_SLAVE_DS2413 is not set
+# CONFIG_W1_SLAVE_DS2423 is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2438 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_DS2780 is not set
+# CONFIG_W1_SLAVE_DS2781 is not set
+# CONFIG_W1_SLAVE_DS2805 is not set
+# CONFIG_W1_SLAVE_DS28E04 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WANXL is not set
+# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_CORE is not set
+CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
+# CONFIG_WATCHDOG_SYSFS is not set
+# CONFIG_WD80x3 is not set
+# CONFIG_WDAT_WDT is not set
+# CONFIG_WDTPCI is not set
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PRIV=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WILINK_PLATFORM_DATA=y
+# CONFIG_WIMAX is not set
+# CONFIG_WIMAX_GDM72XX is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_WDS is not set
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+# CONFIG_WL1251 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_WL18XX is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_VENDOR_ADMTEK is not set
+# CONFIG_WLAN_VENDOR_ATH is not set
+# CONFIG_WLAN_VENDOR_ATMEL is not set
+# CONFIG_WLAN_VENDOR_BROADCOM is not set
+# CONFIG_WLAN_VENDOR_CISCO is not set
+# CONFIG_WLAN_VENDOR_INTEL is not set
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+# CONFIG_WLAN_VENDOR_MEDIATEK is not set
+# CONFIG_WLAN_VENDOR_QUANTENNA is not set
+# CONFIG_WLAN_VENDOR_RALINK is not set
+# CONFIG_WLAN_VENDOR_REALTEK is not set
+# CONFIG_WLAN_VENDOR_RSI is not set
+# CONFIG_WLAN_VENDOR_ST is not set
+# CONFIG_WLAN_VENDOR_TI is not set
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
+# CONFIG_WLCORE is not set
+# CONFIG_WL_MEDIATEK is not set
+CONFIG_WL_TI=y
+CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
+# CONFIG_WQ_WATCHDOG is not set
+# CONFIG_WW_MUTEX_SELFTEST is not set
+# CONFIG_X25 is not set
+# CONFIG_X509_CERTIFICATE_PARSER is not set
+# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
+# CONFIG_X86_PKG_TEMP_THERMAL is not set
+CONFIG_X86_SYSFB=y
+# CONFIG_XEN is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_IPCOMP is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_WARN is not set
+# CONFIG_XILINX_AXI_EMAC is not set
+# CONFIG_XILINX_DMA is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_XILINX_GMII2RGMII is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_XILINX_WATCHDOG is not set
+# CONFIG_XILINX_ZYNQMP_DMA is not set
+# CONFIG_XILLYBUS is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_XMON is not set
+CONFIG_XZ_DEC=y
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_BCJ is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_SPARC is not set
+# CONFIG_XZ_DEC_TEST is not set
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_ZIIRAVE_WATCHDOG is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_ZLIB_DEFLATE is not set
+# CONFIG_ZLIB_INFLATE is not set
+CONFIG_ZONE_DMA=y
+# CONFIG_ZPA2326 is not set
+# CONFIG_ZPOOL is not set
+# CONFIG_ZRAM is not set
+# CONFIG_ZSMALLOC is not set
+# CONFIG_ZX_TDM is not set

diff --git a/target/linux/lantiq/config-4.16 b/target/linux/lantiq/config-4.16
deleted file mode 100644 (file)
index 5367f8a..0000000
--- a/target/linux/lantiq/config-4.16
+++ /dev/null
@@ -1,284 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
-# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-# CONFIG_ARCH_WANTS_THP_SWAP is not set
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-# CONFIG_ARM_GIC_V3_ITS is not set
-CONFIG_ASN1=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_ASYMMETRIC_KEY_TYPE=y
-CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
-# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_CC_STACKPROTECTOR_AUTO is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
-CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
-# CONFIG_CHASH is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_KPP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RSA=y
-# CONFIG_CRYPTO_SM3 is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-# CONFIG_DMA_DIRECT_OPS is not set
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DMA_VIRT_OPS is not set
-# CONFIG_DP83822_PHY is not set
-# CONFIG_DRM_LIB_RANDOM is not set
-CONFIG_DTC=y
-# CONFIG_DT_EASY50712 is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_EXPORTFS=y
-# CONFIG_FIND_BIT_BENCHMARK is not set
-CONFIG_FIXED_PHY=y
-CONFIG_FUTEX_PI=y
-# CONFIG_GEMINI_ETHERNET is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_IPI=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_MAX3191X is not set
-# CONFIG_GPIO_MB86S7X is not set
-CONFIG_GPIO_MM_LANTIQ=y
-CONFIG_GPIO_STP_XWAY=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GRO_CELLS is not set
-# CONFIG_GUP_BENCHMARK is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_KEYS=y
-CONFIG_LANTIQ=y
-CONFIG_LANTIQ_DT_NONE=y
-CONFIG_LANTIQ_ETOP=y
-CONFIG_LANTIQ_WDT=y
-# CONFIG_LANTIQ_XRX200 is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MISC_RTSX is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPILIB=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_LANTIQ=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-# CONFIG_NETDEVSIM is not set
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_GSWIP=y
-CONFIG_NET_DSA_LEGACY=y
-CONFIG_NET_DSA_TAG_GSWIP=y
-# CONFIG_NET_SCH_CBS is not set
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NET_VENDOR_CORTINA=y
-CONFIG_NET_VENDOR_SOCIONEXT=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-# CONFIG_OCXL_BASE is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OID_REGISTRY=y
-CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_LANTIQ_RCU_USB2=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_LANTIQ=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_XWAY=y
-CONFIG_PKCS7_MESSAGE_PARSER=y
-# CONFIG_PKCS7_TEST_KEY is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-# CONFIG_RENESAS_PHY is not set
-# CONFIG_RESET_AXS10X is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_LANTIQ=y
-# CONFIG_RESET_SIMPLE is not set
-CONFIG_RFKILL_LEDS=y
-# CONFIG_RPMSG_VIRTIO is not set
-CONFIG_RUNTIME_TESTING_MENU=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_LANTIQ=y
-CONFIG_SGL_ALLOC=y
-# CONFIG_SIOX is not set
-# CONFIG_SLIMBUS is not set
-# CONFIG_SOC_AMAZON_SE is not set
-# CONFIG_SOC_FALCON is not set
-CONFIG_SOC_TYPE_XWAY=y
-CONFIG_SOC_XWAY=y
-# CONFIG_SOUNDWIRE is not set
-CONFIG_SPI=y
-CONFIG_SPI_LANTIQ_SSC=y
-CONFIG_SPI_MASTER=y
-CONFIG_SRCU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSTEM_DATA_VERIFICATION=y
-# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
-CONFIG_SYSTEM_TRUSTED_KEYRING=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_VPE_LOADER=y
-CONFIG_THIN_ARCHIVES=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-# CONFIG_UNISYSSPAR is not set
-CONFIG_USE_OF=y
-CONFIG_VIRTIO_MENU=y
-CONFIG_X509_CERTIFICATE_PARSER=y
-# CONFIG_XILINX_VCU is not set
-# CONFIG_XRX200_PHY_FW is not set

diff --git a/target/linux/lantiq/config-4.17 b/target/linux/lantiq/config-4.17
new file mode 100644 (file)
index 0000000..5367f8a
--- /dev/null
+++ b/target/linux/lantiq/config-4.17
@@ -0,0 +1,284 @@
+CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
+# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+# CONFIG_ARCH_WANTS_THP_SWAP is not set
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+# CONFIG_ARM_GIC_V3_ITS is not set
+CONFIG_ASN1=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_ASYMMETRIC_KEY_TYPE=y
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
+# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CC_STACKPROTECTOR_AUTO is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
+CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
+# CONFIG_CHASH is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CLZ_TAB=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_ACOMP2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AKCIPHER=y
+CONFIG_CRYPTO_AKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_KPP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RSA=y
+# CONFIG_CRYPTO_SM3 is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+# CONFIG_DMA_DIRECT_OPS is not set
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DMA_VIRT_OPS is not set
+# CONFIG_DP83822_PHY is not set
+# CONFIG_DRM_LIB_RANDOM is not set
+CONFIG_DTC=y
+# CONFIG_DT_EASY50712 is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_EXPORTFS=y
+# CONFIG_FIND_BIT_BENCHMARK is not set
+CONFIG_FIXED_PHY=y
+CONFIG_FUTEX_PI=y
+# CONFIG_GEMINI_ETHERNET is not set
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_IPI=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_MAX3191X is not set
+# CONFIG_GPIO_MB86S7X is not set
+CONFIG_GPIO_MM_LANTIQ=y
+CONFIG_GPIO_STP_XWAY=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
+# CONFIG_GUP_BENCHMARK is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_KEYS=y
+CONFIG_LANTIQ=y
+CONFIG_LANTIQ_DT_NONE=y
+CONFIG_LANTIQ_ETOP=y
+CONFIG_LANTIQ_WDT=y
+# CONFIG_LANTIQ_XRX200 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
+CONFIG_LIBFDT=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_SPRAM=y
+# CONFIG_MIPS_VPE_LOADER is not set
+# CONFIG_MISC_RTSX is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MPILIB=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_LANTIQ=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_NETDEVSIM is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_GSWIP=y
+CONFIG_NET_DSA_LEGACY=y
+CONFIG_NET_DSA_TAG_GSWIP=y
+# CONFIG_NET_SCH_CBS is not set
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NET_VENDOR_CORTINA=y
+CONFIG_NET_VENDOR_SOCIONEXT=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+# CONFIG_NO_IOPORT_MAP is not set
+# CONFIG_OCXL_BASE is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OID_REGISTRY=y
+CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHY_LANTIQ_RCU_USB2=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_LANTIQ=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINCTRL_XWAY=y
+CONFIG_PKCS7_MESSAGE_PARSER=y
+# CONFIG_PKCS7_TEST_KEY is not set
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+# CONFIG_RENESAS_PHY is not set
+# CONFIG_RESET_AXS10X is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_LANTIQ=y
+# CONFIG_RESET_SIMPLE is not set
+CONFIG_RFKILL_LEDS=y
+# CONFIG_RPMSG_VIRTIO is not set
+CONFIG_RUNTIME_TESTING_MENU=y
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_LANTIQ=y
+CONFIG_SGL_ALLOC=y
+# CONFIG_SIOX is not set
+# CONFIG_SLIMBUS is not set
+# CONFIG_SOC_AMAZON_SE is not set
+# CONFIG_SOC_FALCON is not set
+CONFIG_SOC_TYPE_XWAY=y
+CONFIG_SOC_XWAY=y
+# CONFIG_SOUNDWIRE is not set
+CONFIG_SPI=y
+CONFIG_SPI_LANTIQ_SSC=y
+CONFIG_SPI_MASTER=y
+CONFIG_SRCU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYSTEM_DATA_VERIFICATION=y
+# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
+CONFIG_SYSTEM_TRUSTED_KEYRING=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_SYS_SUPPORTS_VPE_LOADER=y
+CONFIG_THIN_ARCHIVES=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+# CONFIG_UNISYSSPAR is not set
+CONFIG_USE_OF=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_X509_CERTIFICATE_PARSER=y
+# CONFIG_XILINX_VCU is not set
+# CONFIG_XRX200_PHY_FW is not set

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ACMP252.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ACMP252.dts
deleted file mode 100644 (file)
index 5e1f271..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ACMP252.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-/ {
-       compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
-       model = "AudioCodes MediaPack MP-252";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-               };
-               pci {
-                       lantiq,groups = "gnt1", "req1";
-                       lantiq,function = "pci";
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "rmii";
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x0 0x20000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "uboot_env";
-                               reg = <0x20000 0x20000>;
-                       };
-
-                       partition@40000 {
-                               label = "boardconfig";
-                               reg = <0x40000 0x60000>;
-                               read-only;
-                       };
-
-                       partition@a0000 {
-                               label = "firmware";
-                               reg = <0xa0000 0xf20000>;
-                       };
-
-                       partition@fc0000 {
-                               label = "sysconfig";
-                               reg = <0xfc0000 0x40000>;
-                       };
-
-                       partition@0x1000000 {
-                               label = "rootfs_data";
-                               reg = <0x1000000 0x1000000>;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ALL0333CJ.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ALL0333CJ.dts
deleted file mode 100644 (file)
index 0d128e0..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ALL0333CJ.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-/dts-v1/;
-
-#include "amazonse.dtsi"
-
-/ {
-       compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase";
-       model = "Allnet ALL0333CJ DSL Modem";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-
-               aliases {
-                       led-boot = &power;
-                       led-failsafe = &power;
-                       led-running = &power;
-
-                       led-dsl = &dsl;
-                       led-internet = &online_green;
-               };
-
-       };
-
-       memory@0 {
-               reg = <0x0 0x1000000>;
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               /* power led: red=off, green=on */
-               power: power {
-                       label = "all0333cj:green:power";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-
-               lan: lan {
-                       label = "all0333cj:green:lan";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-
-               dsl: dsl {
-                       label = "all0333cj:green:dsl";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-               };
-
-               online_green: online {
-                       label = "all0333cj:green:online";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-               online_red {
-                       label = "all0333cj:red:online";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               asc {
-                       lantiq,groups = "asc";
-                       lantiq,function = "asc";
-               };
-               keys_in {
-                       lantiq,pins = "io0",/* "io25", */"io29";
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <1>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "mii";
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x400000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "firmware";
-                               reg = <0x10000 0x3ef200>;
-                       };
-
-                       partition@3ff200 {
-                               label = "uboot_env";
-                               reg = <0x3ff200 0xc00>;
-                               read-only;
-                       };
-
-                       partition@3ffe00 {
-                               label = "dummy_bits";
-                               reg = <0x3ffe00 0x200>;
-                               read-only;
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4510PW.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4510PW.dts
deleted file mode 100644 (file)
index 0d0b70c..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4510PW.dts
+++ /dev/null
@@ -1,229 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube";
-       model = "Wippies, Elisa";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power2;
-               led-running = &power;
-
-               led-dsl = &adsl;
-               led-internet = &internet;
-               led-usb = &led_usb;
-               led-usb2 = &led_usb2;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power: power {
-                       label = "power";
-                       gpios = <&gpios 21 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               power2: power2 {
-                       label = "power2";
-                       gpios = <&gpios 20 GPIO_ACTIVE_HIGH>;
-               };
-               lan1 {
-                       label = "lan1";
-                       gpios = <&gpios 19 GPIO_ACTIVE_HIGH>;
-               };
-               lan2 {
-                       label = "lan2";
-                       gpios = <&gpios 18 GPIO_ACTIVE_HIGH>;
-               };
-               lan3 {
-                       label = "lan3";
-                       gpios = <&gpios 17 GPIO_ACTIVE_HIGH>;
-               };
-               lan4 {
-                       label = "lan4";
-                       gpios = <&gpios 16 GPIO_ACTIVE_HIGH>;
-               };
-               wifi: wifi {
-                       label = "wifi";
-                       gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
-               };
-               adsl: adsl {
-                       label = "adsl";
-                       gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
-               };
-               internet: internet {
-                       label = "internet";
-                       gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
-               };
-               internet2 {
-                       label = "internet2";
-                       gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
-               };
-               voip {
-                       label = "voip";
-                       gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
-               };
-               phone {
-                       label = "phone";
-                       gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
-               };
-               phone2 {
-                       label = "phone2";
-                       gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
-               };
-               led_usb: usb {
-                       label = "usb";
-                       gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
-               };
-               led_usb2: usb2 {
-                       label = "usb2";
-                       gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
-               };
-               usb3 {
-                       label = "usb3";
-                       gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
-               };
-               unlabeled {
-                       label = "unlabeled";
-                       gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               ebu {
-                       lantiq,groups = "ebu a23";
-                       lantiq,function = "ebu";
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               stp {
-                       lantiq,groups = "stp";
-                       lantiq,function = "stp";
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               exin {
-                       lantiq,groups = "exin1", "exin2";
-                       lantiq,function = "exin";
-                       lantiq,output = <0>;
-               };
-               pci_in {
-                       lantiq,groups = "req1", "req2";
-                       lantiq,function = "pci";
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1", "gnt2";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               buttons {
-                       lantiq,pins = "io3", "io14";
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-       };
-};
-
-&gpios {
-       status = "okay";
-       lantiq,groups = <0x7>;
-};
-
-&gsw {
-       phy-mode = "rmii";
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x1000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               lantiq,noxip;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "uboot_env";
-                               reg = <0x40000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "firmware";
-                               reg = <0x60000 0xfa0000>;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       lantiq,external-clock;
-       interrupt-map = <
-               0x6000 0 0 1 &icu0 135
-               0x7800 0 0 1 &icu0 66
-               0x7800 0 0 2 &icu0 66
-               0x7800 0 0 3 &icu0 66
-       >;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-       req-mask = <0x7>;
-};
-
-&vmmc {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4518PWR01.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4518PWR01.dts
deleted file mode 100644 (file)
index 34f868f..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4518PWR01.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "ARV4518PWR01.dtsi"
-
-/ {
-       compatible = "arcadyan,arv4518pwr01", "lantiq,xway", "lantiq,danube";
-       model = "SMC7908A-ISP";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4518PWR01.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4518PWR01.dtsi
deleted file mode 100644 (file)
index 458a387..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4518PWR01.dtsi
+++ /dev/null
@@ -1,205 +0,0 @@
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-
-               led-dsl = &dsl;
-               led-internet = &online;
-               led-usb = &led_usb;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       ath5k_eep {
-               compatible = "ath5k,eeprom";
-               ath,eep-flash = <&boardconfig 0x400>;
-               ath,mac-offset = <0x16>;
-               ath,mac-increment = <1>;
-               ath,eep-swap;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power: power {
-                       label = "power";
-                       gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               dsl: dsl {
-                       label = "dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               online: online {
-                       label = "online";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "wifi";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-               };
-               dsl2 {
-                       label = "dsl2";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               led_usb: usb {
-                       label = "usb";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-               voice {
-                       label = "voice";
-                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-               };
-               fxs1 {
-                       label = "fxs1";
-                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-               };
-               fxs2 {
-                       label = "fxs2";
-                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-               };
-               fxo {
-                       label = "fxo";
-                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               ebu {
-                       lantiq,groups = "ebu cs1";
-                       lantiq,function = "ebu";
-               };
-               pci_in {
-                       lantiq,groups = "req1", "req2";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1", "gnt2";
-                       lantiq,function = "pci";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&gpiomm {
-       status = "okay";
-       lantiq,shadow = <0x0>;
-};
-
-&gsw {
-       phy-mode = "mii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>; /* 64 KB */
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>; /* 64 KB */
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x3d0000>;
-                       };
-
-                       boardconfig: partition@400000 {
-                               label = "boardconfig";
-                               reg = <0x3f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-       req-mask = <0xf>;
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4518PWR01A.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4518PWR01A.dts
deleted file mode 100644 (file)
index 9617398..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4518PWR01A.dts
+++ /dev/null
@@ -1,12 +0,0 @@
-/dts-v1/;
-
-#include "ARV4518PWR01.dtsi"
-
-/ {
-       compatible = "arcadyan,arv4518pwr01a", "lantiq,xway", "lantiq,danube";
-       model = "SMC7908A-ISP, Airties WAV-221";
-};
-
-&pci0 {
-       lantiq,external-clock;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4519PW.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4519PW.dts
deleted file mode 100644 (file)
index 5733d2c..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4519PW.dts
+++ /dev/null
@@ -1,202 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube";
-       model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl;
-               led-internet = &internet_green;
-               led-usb = &led_usb;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power_green: power {
-                       label = "arv4519pw:green:power";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_red: power2 {
-                       label = "arv4519pw:red:power";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "arv4519pw:green:wlan";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               dsl: dsl {
-                       label = "arv4519pw:green:dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               internet_green: online {
-                       label = "arv4519pw:green:internet";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               online2 {
-                       label = "arv4519pw:red:internet";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               led_usb: usb {
-                       label = "arv4519pw:green:usb";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-               voip {
-                       label = "arv4519pw:green:voip";
-                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-               };
-               fxs1 {
-                       label = "arv4519pw:green:phone1";
-                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-               };
-               fxs2 {
-                       label = "arv4519pw:green:phone2";
-                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-               };
-               fxo {
-                       label = "arv4519pw:green:line";
-                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-               };
-               wps2 {
-                       label = "arv4519pw:green:wps";
-                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-               };
-               wps {
-                       label = "arv4519pw:orange:wps";
-                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-               };
-               wps3 {
-                       label = "arv4519pw:red:wps";
-                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               ebu {
-                       lantiq,groups = "ebu cs1";
-                       lantiq,function = "ebu";
-               };
-       };
-};
-
-&gpiomm {
-       status = "okay";
-       lantiq,shadow = <0x400>;
-};
-
-&gsw {
-       phy-mode = "mii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x3d0000>;
-                       };
-
-                       boardconfig: partition@3f0000 {
-                               label = "boardconfig";
-                               reg = <0x3f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0  {
-       status = "okay";
-       lantiq,external-clock;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-       req-mask = <0xf>;
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4520PW.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4520PW.dts
deleted file mode 100644 (file)
index aa42693..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4520PW.dts
+++ /dev/null
@@ -1,227 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube";
-       model = "Easybox 800, WAV-281";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_blue;
-               led-failsafe = &power_red;
-               led-running = &power_blue;
-
-               led-dsl = &dsl;
-               led-internet = &internet_blue;
-               led-usb = &led_usb;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "wps";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power_blue: power {
-                       label = "arv4520pw:blue:power";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               dsl: dsl {
-                       label = "arv4520pw:blue:dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               internet_blue: internet {
-                       label = "arv4520pw:blue:internet";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               power_red: power2 {
-                       label = "arv4520pw:red:power";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               wps {
-                       label = "arv4520pw:yellow:wps";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-               };
-               wps2 {
-                       label = "arv4520pw:red:wps";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-               };
-               /*
-                       wps green is missing
-               */
-               fxs1 {
-                       label = "arv4520pw:blue:telefon1";
-                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-               };
-               fxs2 {
-                       label = "arv4520pw:blue:telefon2";
-                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-               };
-               isdn {
-                       label = "arv4520pw:blue:isdn";
-                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-               };
-               fxo {
-                       label = "arv4520pw:blue:line";
-                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-               };
-               voice {
-                       label = "arv4520pw:blue:sprache";
-                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-               };
-               led_usb: usb {
-                       label = "arv4520pw:blue:usb";
-                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "arv4520pw:blue:wifi";
-                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-               };
-               internet2 {
-                       label = "arv4520pw:red:internet";
-                       gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
-               };
-               /*
-                       info is missing
-               */
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               ebu {
-                       lantiq,groups = "ebu cs1";
-                       lantiq,function = "ebu";
-               };
-               pci_in {
-                       lantiq,groups = "req1";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-       };
-};
-
-&gpiomm {
-       status = "okay";
-       lantiq,shadow = <0x400>;
-};
-
-&gsw {
-       /* gpiomm 10 - switch */
-       phy-mode = "rmii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x800000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "uboot_env";
-                               reg = <0x20000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "firmware";
-                               reg = <0x30000 0x3c0000>;
-                       };
-
-                       boardconfig: partition@7f0000 {
-                               label = "boardconfig";
-                               reg = <0x3f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       lantiq,external-clock;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH
-               &gpiomm 7 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4525PW.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4525PW.dts
deleted file mode 100644 (file)
index b3904d3..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV4525PW.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube";
-       model = "Speedport W501V Typ A";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               /* we dont have a power led, lets use the online led */
-               led-boot = &online;
-               led-failsafe = &online;
-
-               led-dsl = &dsl;
-               led-internet = &online;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       ath5k_eep {
-               compatible = "ath5k,eeprom";
-               ath,eep-flash = <&boardconfig 0x400>;
-               ath,mac-offset = <0x0>;
-               ath,eep-swap;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               fxo {
-                       label = "arv4525pw:green:festnetz";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               fxs {
-                       label = "arv4525pw:green:internet";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               dsl: dsl {
-                       label = "arv4525pw:green:t-dsl";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "arv4525pw:green:wlan";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               online: online {
-                       label = "arv4525pw:green:online";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               pci_in {
-                       lantiq,groups = "req1";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,pull = <2>;
-                       lantiq,output = <1>;
-               };
-               relay {
-                       lantiq,pins = "io31";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-/* #define ARV4525PW_PHYRESET  13 */
-&gsw {
-       phy-mode = "mii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x3d0000>;
-                       };
-
-                       boardconfig: partition@400000 {
-                               label = "boardconfig";
-                               reg = <0x3f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-/* #define ARV4525PW_RELAY             31 */
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV452CQW.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV452CQW.dts
deleted file mode 100644 (file)
index 1e1183d..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV452CQW.dts
+++ /dev/null
@@ -1,245 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
-       model = "Arcor 801";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_blue;
-               led-failsafe = &power_red;
-               led-running = &power_blue;
-
-               led-dsl = &dsl_blue;
-               led-usb = &led_usb;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       ath5k_eep {
-               compatible = "ath5k,eeprom";
-               ath,eep-flash = <&boardconfig 0x400>;
-               ath,mac-offset = <0x0>;
-               ath,eep-swap;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power_blue: power0 {
-                       label = "arv452cqw:blue:power";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               dsl_blue: dsl {
-                       label = "arv452cqw:blue:dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               isdn {
-                       label = "arv452cqw:blue:isdn";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               power_red: power1 {
-                       label = "arv452cqw:red:power";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               wps {
-                       label = "arv452cqw:blue:wps";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-               };
-               wps1 {
-                       label = "arv452cqw:yellow:wps";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-               };
-               fxs1 {
-                       label = "arv452cqw:blue:telefon1";
-                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-               };
-               fxs2 {
-                       label = "arv452cqw:blue:telefon2";
-                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-               };
-               wps2 {
-                       label = "arv452cqw:red:wps";
-                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-               };
-               fxo {
-                       label = "arv452cqw:blue:line";
-                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-               };
-               voice {
-                       label = "arv452cqw:blue:sprache";
-                       gpios = <&gpiomm 4 1>;
-               };
-               led_usb: usb {
-                       label = "arv452cqw:blue:usb";
-                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "arv452cqw:blue:wlan";
-                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-               };
-               /*
-                       internet blue and internet red are missing
-                       dsl2 and dsl3 are not referenced in manual
-               */
-               dsl2 {
-                       label = "arv452cqw:yellow:dsl";
-                       gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
-               };
-               dsl3 {
-                       label = "arv452cqw:red:dsl";
-                       gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               ebu {
-                       lantiq,groups = "ebu cs1";
-                       lantiq,function = "ebu";
-               };
-               pci_in {
-                       lantiq,groups = "req1";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-               leds {
-                       lantiq,pins = "io3", "io5", "io6", "io7", "io9";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&gpiomm {
-       status = "okay";
-       lantiq,shadow = <0x77f>;
-};
-
-/*
-#define ARV452CPW_SWITCH_RESET          110
-*/
-&gsw {
-       phy-mode = "rmii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x400000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x3d0000>;
-                       };
-
-                       boardconfig: partition@3f0000 {
-                               label = "boardconfig";
-                               reg = <0x3f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       lantiq,external-clock;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH
-               &gpiomm 7 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7506PW11.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7506PW11.dts
deleted file mode 100644 (file)
index 0c251c6..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7506PW11.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
-       model = "Alice/O2 IAD 4421";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power_red;
-               led-running = &power;
-
-               led-dsl = &dsl;
-               led-internet = &internet;
-               led-wifi = &wlan;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               wlan: wlan {
-                       label = "arv7506pw11:green:wlan";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-               };
-               power: power {
-                       label = "arv7506pw11:green:power";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               dsl: dsl {
-                       label = "arv7506pw11:green:dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               internet: internet {
-                       label = "arv7506pw11:green:internet";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               power_red: power_red {
-                       label = "arv7506pw11:red:power";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               internet_red {
-                       label = "arv7506pw11:red:internet";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-               };
-               info {
-                       label = "arv7506pw11:green:info";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               telefon {
-                       label = "arv7506pw11:green:telefon";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-               };
-               info_red {
-                       label = "arv7506pw11:red:info";
-                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               pci {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,pull = <2>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-/* GPIO 19: switch reset */
-&gsw {
-       phy-mode = "rmii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x800000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "uboot_env";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               label = "firmware";
-                               reg = <0x50000 0x7a0000>;
-                       };
-
-                       boardconfig: partition@7f0000 {
-                               label = "board_config";
-                               reg = <0x7f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       lantiq,external-clock;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@1814,3592 {
-               compatible = "pci1814,3592";
-               reg = <0x7000 0 0 0 0>;
-               ralink,mtd-eeprom = <&boardconfig 0x410>;
-               ralink,mtd-eeprom-swap;
-               mtd-mac-address = <&boardconfig 0x16>;
-               mtd-mac-address-increment = <1>;
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7510PW22.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7510PW22.dts
deleted file mode 100644 (file)
index 337f969..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7510PW22.dts
+++ /dev/null
@@ -1,208 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
-       model = "Astoria Networks ARV7510PW22";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-
-               led-dsl = &internet;
-               led-usb = &umts;
-               led-wifi = &wlan;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               restart {
-                       label = "restart";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_POWER>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power: power {
-                       label = "power";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               internet: internet {
-                       label = "internet";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               wlan: wlan {
-                       label = "wlan";
-                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-               };
-               umts: 3g {
-                       label = "3g";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-               message {
-                       label = "message";
-                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_in {
-                       lantiq,groups = "req1", "req2";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,pull = <2>;
-                       lantiq,output = <1>;
-               };
-               pins_out {
-                       lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
-                       lantiq,output = <1>;
-               };
-               pins_in {
-                       lantiq,pins = "io11", "io12", "io28";
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gsw {
-       /* Switch reset 19 */
-       phy-mode = "mii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x1000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "uboot_env";
-                               reg = <0x40000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "firmware";
-                               reg = <0x60000 0xf80000>;
-                       };
-
-                       boardconfig: partition@fe0000 {
-                               label = "board_config";
-                               reg = <0xfe0000 0x20000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       lantiq,external-clock;
-       interrupt-map = <
-               0x7000 0 0 1 &icu0 30
-               0x7800 0 0 1 &icu0 135
-               0x7800 0 0 2 &icu0 135
-               0x7800 0 0 3 &icu0 135
-       >;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-       req-mask = <0x3>;
-
-       wifi@1814,3592 {
-               compatible = "pci1814,3592";
-               reg = <0x7000 0 0 0 0>;
-               ralink,mtd-eeprom = <&boardconfig 0x410>;
-               ralink,mtd-eeprom-swap;
-       };
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7518PW.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7518PW.dts
deleted file mode 100644 (file)
index 1d6f404..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7518PW.dts
+++ /dev/null
@@ -1,239 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
-       model = "Astoria Networks ARV7518PW";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl;
-               led-internet = &online_green;
-               led-usb = &led_usb;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power_green: power {
-                       label = "arv7518pw:green:power";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               dsl: dsl {
-                       label = "arv7518pw:green:dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               online_green: online {
-                       label = "arv7518pw:green:internet";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "arv7518pw:green:wlan";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               power_red: power2 {
-                       label = "arv7518pw:red:power";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-               };
-               online2 {
-                       label = "arv7518pw:red:internet";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               led_usb: usb {
-                       label = "arv7518pw:green:usb";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-               voice {
-                       label = "arv7518pw:green:voip";
-                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-               };
-               fxs1 {
-                       label = "arv7518pw:green:phone1";
-                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-               };
-               fxs2 {
-                       label = "arv7518pw:green:phone2";
-                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-               };
-               unlabeled {
-                       label = "arv7518pw:amber:unlabeled";
-                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-               };
-               wps {
-                       label = "arv7518pw:amber:wps";
-                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-               };
-               wps2 {
-                       label = "arv7518pw:green:wps";
-                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-               };
-               wps3 {
-                       label = "arv7518pw:red:wps";
-                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               ebu {
-                       lantiq,groups = "ebu cs1";
-                       lantiq,function = "ebu";
-               };
-               pci_in {
-                       lantiq,groups = "req1";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,pull = <2>;
-                       lantiq,output = <1>;
-               };
-               leds {
-                       lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
-                       lantiq,output = <1>;
-               };
-               keys {
-                       lantiq,pins = "io28", "io30";
-                       lantiq,output = <0>;
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <1>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpiomm {
-       status = "okay";
-       lantiq,shadow = <0x0>;
-};
-
-/*
-#define SWITCH_RESET          13
-*/
-&gsw {
-       phy-mode = "mii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x7d0000>;
-                       };
-
-                       boardconfig: partition@400000 {
-                               label = "boardconfig";
-                               reg = <0x7f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-       lantiq,external-clock;
-       req-mask = <0xf>;
-
-       wifi@168c,0029 {
-               compatible = "pci168c,0029";
-               reg = <0x7000 0 0 0 0>;
-               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-               mtd-mac-address = <&boardconfig 0x16>;
-               mtd-mac-address-increment = <1>;
-       };
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7519PW.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7519PW.dts
deleted file mode 100644 (file)
index 39dcf45..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7519PW.dts
+++ /dev/null
@@ -1,228 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube";
-       model = "Astoria Networks ARV7519PW";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power2;
-               led-running = &power;
-
-               led-dsl = &dsl;
-               led-internet = &online;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power: power {
-                       label = "power";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power2: power2 {
-                       label = "power2";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-               };
-               online: online {
-                       label = "online";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-               online2 {
-                       label = "online2";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "wifi";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-               wifi2 {
-                       label = "wifi2";
-                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-               };
-               wifi3 {
-                       label = "wifi3";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               voice {
-                       label = "voice";
-                       gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-               wps2 {
-                       label = "wps2";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-               };
-               wps3 {
-                       label = "wps3";
-                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
-               };
-               dsl: dsl {
-                       label = "dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               lan {
-                       label = "lan";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-               };
-               tv {
-                       label = "tv";
-                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-               };
-               upgrade {
-                       label = "upgrade";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       /* is there another way to "reserve" the GPIO? */
-       gpio_export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               switch {
-                       gpio-export,name = "switch";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               ebu {
-                       lantiq,groups = "ebu cs1";
-                       lantiq,function = "ebu";
-               };
-               pci_in {
-                       lantiq,groups = "req1";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,pull = <2>;
-                       lantiq,output = <1>;
-               };
-               switch_rst {
-                       lantiq,pins = "io19";
-                       lantiq,pull = <2>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "mii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "uboot_env";
-                               reg = <0x40000 0x20000>;
-                       };
-
-                       partition@60000 {
-                               label = "firmware";
-                               reg = <0x60000 0xf80000>;
-                       };
-
-                       boardconfig: partition@fe0000 {
-                               label = "board_config";
-                               reg = <0xfe0000 0x20000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       lantiq,external-clock;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-       req-mask = <0xf>;
-
-       wifi@0,0 {
-               compatible = "pci0,0";
-               reg = <0x7000 0 0 0 0>;
-               ralink,mtd-eeprom = <&boardconfig 0x410>;
-               ralink,mtd-eeprom-swap;
-       };
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-/* warning: passive port only works with active devices */
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7519RW22.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7519RW22.dts
deleted file mode 100644 (file)
index 40607ae..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7519RW22.dts
+++ /dev/null
@@ -1,253 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
-       model = "Orange Livebox 2.1";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_green;
-               led-running = &power_green;
-
-               led-dsl = &internet_green;
-       };
-
-       memory@0 {
-               reg = <0x0 0x8000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               lan_green {
-                       label = "arv7519rw22:green:lan";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-               };
-               internet_red {
-                       label = "arv7519rw22:red:internet";
-                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-               };
-               power_green: power_green {
-                       label = "arv7519rw22:green:power";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               alarm_blue {
-                       label = "arv7519rw22:blue:alarm";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-               internet_orange {
-                       label = "arv7519rw22:orange:internet";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-               internet_green: internet_green {
-                       label = "arv7519rw22:green:internet";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-               };
-               voice_green {
-                       label = "arv7519rw22:green:voice";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&boardconfig 0x16>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-               };
-               ethernet@1 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy13>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy14>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@4 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <3>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy12>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy12: ethernet-phy@12 {
-                       reg = <0x12>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy14: ethernet-phy@14 {
-                       reg = <0x14>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               pcie-rst {
-                       lantiq,pins = "io21";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x0 0x60000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "uboot-env";
-                               reg = <0x60000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@80000 {
-                               label = "firmware";
-                               reg = <0x80000 0x1f00000>;
-                       };
-
-                       boardconfig: partition@1f80000 {
-                               label = "boardconfig";
-                               reg = <0x1f80000 0x80000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pcie0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb_phy1 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7525PW.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7525PW.dts
deleted file mode 100644 (file)
index 4252226..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV7525PW.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
-       model = "Speedport W303V Typ A";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &power_green;
-               led-internet = &online;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power_green: power {
-                       label = "arv7525pw:green:power";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_red: power1 {
-                       label = "arv7525pw:red:power";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               online: online {
-                       label = "arv7525pw:green:online";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               voice {
-                       label = "arv7525pw:green:telefonie";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               voice2 {
-                       label = "arv7525pw:red:telefonie";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "arv7525pw:green:wlan";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-               };
-               pci {
-                       lantiq,groups = "gnt1", "req1";
-                       lantiq,function = "pci";
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "mii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x3d0000>;
-                       };
-
-                       boardconfig: partition@400000 {
-                               label = "board_config";
-                               reg = <0x3f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
-
-       wifi@0,0 {
-               compatible = "pci0,0";
-               reg = <0x7000 0 0 0 0>;
-               ralink,mtd-eeprom = <&boardconfig 0x410>;
-       };
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV752DPW.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV752DPW.dts
deleted file mode 100644 (file)
index 7b337b4..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV752DPW.dts
+++ /dev/null
@@ -1,245 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
-       model = "Arcor 802";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_red;
-               led-failsafe = &power_blue;
-               led-running = &power_red;
-
-               led-dsl = &internet_red;
-               led-usb = &umts;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               restart {
-                       label = "restart";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_POWER>;
-               };
-               dsl {
-                       label = "dsl";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power_blue: power1 {
-                       label = "arv752dpw:blue:power";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-               internet_red: internet {
-                       label = "arv752dpw:red:internet";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               message {
-                       label = "arv752dpw:red:message";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               power_red: power {
-                       label = "arv752dpw:red:power";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               voice1 {
-                       label = "arv752dpw:red:voice";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               umts: umts {
-                       label = "arv752dpw:red:umts";
-                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "arv752dpw:red:wifi";
-                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-               };
-               fxs1 {
-                       label = "arv752dpw:green:tae-n";
-                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-               };
-               fxs2 {
-                       label = "arv752dpw:green:tae-u";
-                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-               };
-               fxo {
-                       label = "arv752dpw:green:isdn";
-                       gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
-               };
-               internet2 {
-                       label = "arv752dpw:blue:internet";
-                       gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
-               };
-               voice2 {
-                       label = "arv752dpw:blue:voice";
-                       gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               ebu {
-                       lantiq,groups = "ebu cs1";
-                       lantiq,function = "ebu";
-               };
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_in {
-                       lantiq,groups = "req2", "req1";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,pull = <2>;
-                       lantiq,output = <1>;
-               };
-               leds {
-                       lantiq,pins = "io3", "io5", "io6", "io8";
-                       lantiq,output = <1>;
-                       lantiq,pull = <0>;
-               };
-               keys {
-                       lantiq,pins = "io11", "io12", "io13", "io28";
-                       lantiq,output = <0>;
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <1>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpiomm {
-       status = "okay";
-       lantiq,shadow = <0x3>;
-};
-
-&gsw {
-       phy-mode = "rmii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x800000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x7d0000>;
-                       };
-
-                       boardconfig: partition@7f0000 {
-                               label = "board_config";
-                               reg = <0x7f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       lantiq,external-clock;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-       interrupt-map = <0x7000 0 0 1 &icu0 135>;
-       req-mask = <0x3>;
-
-       wifi@1814,0601 {
-               compatible = "pci1814,0601";
-               reg = <0x7000 0 0 0 0>;
-               ralink,mtd-eeprom = <&boardconfig 0x410>;
-               ralink,mtd-eeprom-swap;
-       };
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV752DPW22.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV752DPW22.dts
deleted file mode 100644 (file)
index feb92d4..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV752DPW22.dts
+++ /dev/null
@@ -1,267 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
-       model = "Arcor 803";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_red;
-               led-failsafe = &power_blue;
-               led-running = &power_red;
-
-               led-dsl = &internet_red;
-               led-usb = &umts;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               restart {
-                       label = "restart";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_POWER>;
-               };
-               dsl {
-                       label = "dsl";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power_blue: power1 {
-                       label = "arv752dpw22:blue:power";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-               internet_red: internet {
-                       label = "arv752dpw22:red:internet";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               message {
-                       label = "arv752dpw22:red:message";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               power_red: power {
-                       label = "arv752dpw22:red:power";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               voice1 {
-                       label = "arv752dpw22:red:voice";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               umts: umts {
-                       label = "arv752dpw22:red:umts";
-                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "arv752dpw22:red:wifi";
-                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-               };
-               fxs1 {
-                       label = "arv752dpw22:green:tae-n";
-                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-               };
-               fxs2 {
-                       label = "arv752dpw22:green:tae-u";
-                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-               };
-               fxo {
-                       label = "arv752dpw22:green:isdn";
-                       gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
-               };
-               internet2 {
-                       label = "arv752dpw22:blue:internet";
-                       gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
-               };
-               voice2 {
-                       label = "arv752dpw22:blue:voice";
-                       gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
-               };
-               eth1 {
-                        label = "arv752dpw22:green:lan1";
-                        gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
-               };
-               eth2 {
-                       label = "arv752dpw22:green:lan2";
-                       gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
-               };
-               eth3 {
-                       label = "arv752dpw22:green:lan3";
-                       gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
-               };
-               eth4 {
-                       label = "arv752dpw22:green:lan4";
-                       gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               ebu {
-                       lantiq,groups = "ebu cs1";
-                       lantiq,function = "ebu";
-               };
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_in {
-                       lantiq,groups = "req1";
-                       lantiq,function = "pci";
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <1>;
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,open-drain = <1>;
-                       lantiq,output = <1>;
-               };
-               leds {
-                       lantiq,pins = "io3", "io5", "io6", "io8";
-                       lantiq,open-drain = <1>;
-                       lantiq,output = <1>;
-               };
-               buttons {
-                       lantiq,pins = "io11", "io12", "io13", "io28";
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-       };
-};
-
-
-&gpiomm {
-       status = "okay";
-       lantiq,shadow = <3>;
-};
-
-&gsw {
-       phy-mode = "mii";
-       mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x800000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x30000>;
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x40000 0x7b0000>;
-                       };
-
-                       boardconfig: partition@7f0000 {
-                               label = "board_config";
-                               reg = <0x7f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       lantiq,external-clock;
-       interrupt-map = <
-               0x7000 0 0 1 &icu0 30
-               0x7800 0 0 1 &icu0 135
-               0x7800 0 0 2 &icu0 135
-               0x7800 0 0 3 &icu0 135
-       >;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-       req-mask = <0x3>;
-
-       wifi@1814,3592 {
-               compatible = "pci1814,3592";
-               reg = <0x7000 0 0 0 0>;
-               ralink,mtd-eeprom = <&boardconfig 0x410>;
-               ralink,mtd-eeprom-swap;
-               mtd-mac-address = <&boardconfig 0x16>;
-       };
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV8539PW22.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV8539PW22.dts
deleted file mode 100644 (file)
index 1e39380..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ARV8539PW22.dts
+++ /dev/null
@@ -1,191 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube";
-       model = "Speedport W 504V Typ A";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl_green;
-               led-internet = &online_green;
-               led-wifi = &wireless_green;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               /* key DECT is missing */
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power_green: power-green {
-                       label = "arv8539pw22:green:power";
-                       gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_red: power-red {
-                       label = "arv8539pw22:red:power";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-
-               dsl_green: dsl-green {
-                       label = "arv8539pw22:green:dsl";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-
-               online_green: online-green {
-                       label = "arv8539pw22:green:online";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-
-               wireless_green: wireless-green {
-                       label = "arv8539pw22:green:wlan";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               /*
-                       telefonie green is missing
-               */
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               pci_in {
-                       lantiq,groups = "req1";
-                       lantiq,function = "pci";
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <0>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,output = <1>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,pull = <2>;
-                       lantiq,output = <1>;
-               };
-               relay {
-                       lantiq,pins = "io31";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "mii";
-       mtd-mac-address = <&art 0x16>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x800000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x30000>;        /* 192 KiB */
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "uboot";
-                               reg = <0x30000 0x10000>;        /* 64 KiB */
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "firmware";
-                               reg = <0x40000 0x7B0000>;       /* 7872 KiB */
-                       };
-
-                       art: partition@7F0000 {
-                               label = "art";
-                               reg = <0x7F0000 0x10000>;       /* 64 KiB*/
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@168c,0029 {
-               compatible = "pci168c,0029";
-               reg = <0x7000 0 0 0 0>;
-               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-               mtd-mac-address = <&art 0x16>;
-               mtd-mac-address-increment = <1>;
-       };
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ASL56026.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ASL56026.dts
deleted file mode 100644 (file)
index 9a78822..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ASL56026.dts
+++ /dev/null
@@ -1,172 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
-       model = "BT OpenReach VDSL Modem";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl;
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               dsl: dsl {
-                       label = "asl56026:green:dsl";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-
-               /* power-* is a bicolour led */
-               power_green: power_green {
-                       label = "asl56026:green:power";
-                       gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-
-               power_red: power_red {
-                       label = "asl56026:red:power";
-                       gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       gpio_export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               power_led_blink {
-                       gpio-export,name = "power_led_blink";
-                       gpio-export,output = <0>;
-                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               lantiq,switch;
-
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy11>;
-               };
-
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <3>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy14>;
-               };
-
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-
-               phy14: ethernet-phy@14 {
-                       reg = <0x14>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-       };
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x0800000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x0 0x30000>;
-                       };
-
-                       partition@30000 {
-                               label = "uboot_env";
-                               reg = <0x30000 0x10000>;
-                       };
-
-                       partition@40000 {
-                               label = "firmware";
-                               reg = <0x40000 0x750000>;
-                       };
-
-                       partition@790000 {
-                               label = "ddrconfig";
-                               reg = <0x790000 0x70000>;
-                               read-only;
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/BTHOMEHUBV2B.dts
deleted file mode 100644 (file)
index 105dae4..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/BTHOMEHUBV2B.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
-       model = "BT Home Hub 2B";  /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_orange;
-               led-failsafe = &power_red;
-               led-running = &power_blue;
-
-               led-dsl = &broadband_blue;
-               led-wifi = &wireless_blue;
-       };
-
-       memory@0 {                                /* RAM: Samsung K4H511638F-LC 64MB */
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               findhandset {
-                       label = "findhandset";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_PHONE>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               upgrading-orange {
-                       label = "bthomehubv2b:orange:upgrading";
-                       gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
-               };
-
-               phone-orange {
-                       label = "bthomehubv2b:orange:phone";
-                       gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
-               };
-               phone-blue {
-                       label = "bthomehubv2b:blue:phone";
-                       gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               wireless-orange {
-                       label = "bthomehubv2b:orange:wireless";
-                       gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
-               };
-               wireless_blue: wireless-blue {
-                       label = "bthomehubv2b:blue:wireless";
-                       gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               broadband-red {
-                       label = "bthomehubv2b:red:broadband";
-                       gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
-               };
-               broadband-orange {
-                       label = "bthomehubv2b:orange:broadband";
-                       gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
-               };
-               broadband_blue: broadband-blue {
-                       label = "bthomehubv2b:blue:broadband";
-                       gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
-               };
-
-               power_red: power-red {
-                       label = "bthomehubv2b:red:power";
-                       gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
-               };
-               power_orange: power-orange {
-                       label = "bthomehubv2b:orange:power";
-                       gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               power_blue: power-blue {
-                       label = "bthomehubv2b:blue:power";
-                       gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               nand_out {
-                       lantiq,groups = "nand cle", "nand ale";
-                       lantiq,function = "ebu";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-               nand_cs1 {
-                       lantiq,groups = "nand cs1";
-                       lantiq,function = "ebu";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-               };
-               pci_in {
-                       lantiq,groups = "req1";
-                       lantiq,function = "pci";
-                       lantiq,output = <0>;
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-               };
-
-               btn_in {
-                       lantiq,pins = "io2", "io15", "io22";
-                       lantiq,output = <0>;
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-               };
-       };
-};
-
-&gpios {
-       status = "okay";
-};
-
-&gsw {
-       phy-mode = "rmii";
-};
-
-&localbus {
-       nor@0 {                         /* NOR Flash: Spansion S29AL004D 512KB */
-               compatible = "lantiq,nor";      /* "AMD AM29LV400BB" compatible on 3.3.8 */
-               lantiq,cs = <0>;
-               bank-width = <2>;
-               reg = <0 0x0 0x80000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>; /* 256KB */
-                       };
-
-                       partition@40000 {
-                               label = "uboot_env";
-                               reg = <0x40000 0x10000>; /* 64KB */
-                       };
-
-                       partition@50000 {
-                               label = "rg_conf_1";
-                               reg = <0x50000 0x10000>;
-                       };
-
-                       partition@60000 {
-                               label = "rg_conf_2";
-                               reg = <0x60000 0x10000>;
-                       };
-
-                       partition@70000 {
-                               label = "rg_conf_factory";
-                               reg = <0x70000 0x10000>;
-                       };
-               };
-       };
-
-       nand@1 {                  /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
-               compatible = "lantiq,nand-xway";
-               lantiq,cs = <1>;
-               bank-width = <2>;
-               reg = <1 0x0 0x2000000 >;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       ath9k_cal: partition@0 {
-                               label = "art";     /* Atheros 9160 wifi b/g/n radio EEPROM */
-                               reg = <0x00000 0x4000>;
-                               read-only;
-                       };
-
-                       partition@4000 {
-                               label = "kernel";
-                               reg = <0x4000 0x200000>;
-                       };
-
-                       partition@164000 {
-                               label = "ubi";
-                               reg = <0x204000 0x1DFC000>;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@168c,0027 {
-               compatible = "pci168c,0027";
-               reg = <0x7000 0 0 0 0>;
-               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-       };
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/BTHOMEHUBV3A.dts
deleted file mode 100644 (file)
index 6bba7e4..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/BTHOMEHUBV3A.dts
+++ /dev/null
@@ -1,215 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9";
-       model = "BT Home Hub 3A";  /* SoC: Lantiq ar9 @ 333MHz */
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_orange;
-               led-failsafe = &power_red;
-               led-running = &power_blue;
-
-               led-dsl = &broadband_blue;
-               led-wifi = &wireless_blue;
-       };
-
-       memory@0 {                                /* RAM: Samsung K4H511638F-LC 64MB */
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               restart {
-                       label = "restart";
-                       gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_POWER>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               wireless-red {
-                       label = "bthomehubv3a:red:wireless";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-               };
-               wireless-orange {
-                       label = "bthomehubv3a:orange:wireless";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               wireless_blue: wireless-blue {
-                       label = "bthomehubv3a:blue:wireless";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-               };
-
-               broadband-red {
-                       label = "bthomehubv3a:red:broadband";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-               };
-               broadband-orange {
-                       label = "bthomehubv3a:orange:broadband";
-                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-               };
-               broadband_blue: broadband-blue {
-                       label = "bthomehubv3a:blue:broadband";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-
-               power_red: power-red {
-                       label = "bthomehubv3a:red:power";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-               };
-               power_orange: power-orange {
-                       label = "bthomehubv3a:orange:power";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_blue: power-blue {
-                       label = "bthomehubv3a:blue:power";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               nand_out {
-                       lantiq,groups = "nand cle", "nand ale";
-                       lantiq,function = "ebu";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-               nand_cs1 {
-                       lantiq,groups = "nand cs1";
-                       lantiq,function = "ebu";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-
-               pci_in {
-                       lantiq,groups = "req1";
-                       lantiq,function = "pci";
-                       lantiq,output = <0>;
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-               };
-               pci_out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "rgmii";
-};
-
-&localbus {
-       nand@1 {                  /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
-               compatible = "lantiq,nand-xway";
-               lantiq,cs = <1>;
-               bank-width = <2>;
-               reg = <1 0x0 0x2000000 >;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "preboot";
-                               reg = <0x00000 0x8000>;
-                               read-only;
-                       };
-                       partition@8000 {
-                               label = "u-boot";
-                               reg = <0x8000 0x05c000>;
-                               read-only;
-                       };
-                       partition@64000 {
-                               label = "uboot_env";
-                               reg = <0x64000 0x004000>;
-                       };
-                       ath9k_cal: partition@68000 {
-                               label = "art-copy";
-                               reg = <0x68000 0x004000>;
-                       };
-                       partition@6c000 {
-                               label = "kernel";
-                               reg = <0x6c000 0x200000>;
-                       };
-                       partition@26c000 {
-                               label = "ubi";
-                               reg = <0x26c000 0x1d94000>;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       ath9k@7000 {
-               reg = <0x7000 0 0 0 0>;
-               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/BTHOMEHUBV5A.dts
deleted file mode 100644 (file)
index acbed18..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/BTHOMEHUBV5A.dts
+++ /dev/null
@@ -1,312 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9";
-       model = "BT Home Hub 5A";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_blue;
-
-               led-dsl = &broadband_blue;
-               led-wifi = &wireless_blue;
-       };
-
-       memory@0 {
-               reg = <0x0 0x8000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-
-               restart {
-                       label = "restart";
-                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_POWER>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               /* broadband-* is a single RGB led */
-               broadband-red {
-                       label = "bthomehubv5a:red:broadband";
-                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-               };
-               broadband-green {
-                       label = "bthomehubv5a:green:broadband";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-               broadband_blue: broadband-blue {
-                       label = "bthomehubv5a:blue:broadband";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-
-               /* wireless-* is a single RGB led */
-               wireless-red {
-                       label = "bthomehubv5a:red:wireless";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-               };
-               wireless-green {
-                       label = "bthomehubv5a:green:wireless";
-                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-               };
-               wireless_blue: wireless-blue {
-                       label = "bthomehubv5a:blue:wireless";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-               };
-
-               /* power-* is a single RGB led */
-               power_red: power-red {
-                       label = "bthomehubv5a:red:power";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-               power_green: power-green {
-                       label = "bthomehubv5a:green:power";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_blue: power-blue {
-                       label = "bthomehubv5a:blue:power";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-
-               dimmed {
-                       label = "dimmed";
-                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
-       };
-};
-
-&gswip {
-       dsa,member = <0 0>;
-
-       ports {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               port@0 {
-                       reg = <0>;
-                       label = "lan3";
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-               };
-
-               port@1 {
-                       reg = <1>;
-                       label = "lan4";
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy1>;
-               };
-
-               port@2 {
-                       reg = <2>;
-                       label = "lan2";
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-
-               port@4 {
-                       reg = <4>;
-                       label = "lan1";
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-
-               port@5 {
-                       reg = <5>;
-                       label = "wan";
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };
-
-               port@6 {
-                       reg = <0x6>;
-                       label = "cpu";
-                       ethernet = <&eth0>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-               };
-               phy1: ethernet-phy@1 {
-                       reg = <0x1>;
-               };
-               phy5: ethernet-phy@5 {
-                       reg = <0x5>;
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-       compatible = "lantiq,xrx200a2x-gphy";
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-       compatible = "lantiq,xrx200a2x-gphy";
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,output = <1>;
-                       lantiq,open-drain;
-               };
-               pcie_rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-                       lantiq,open-drain;
-               };
-               usb_vbus {
-                       lantiq,pins = "io33";
-                       lantiq,pull = <0>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               nand_out {
-                       lantiq,groups = "nand cle", "nand ale";
-                       lantiq,function = "ebu";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-               nand_cs1 {
-                       lantiq,groups = "nand cs1";
-                       lantiq,function = "ebu";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-       };
-};
-
-&localbus {
-       nand@1 {
-               compatible = "lantiq,nand-xway";
-               lantiq,cs = <1>;
-               bank-width = <2>;
-               reg = <0x1 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               nand-on-flash-bbt;
-               nand-ecc-strength = <3>;
-               nand-ecc-step-size = <256>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0xa0000>;
-                               read-only;
-                       };
-                       partition@a0000 {
-                               label = "uboot-env";
-                               reg = <0xa0000 0x20000>;
-                               read-only;
-                       };
-                       partition@c0000 {
-                               label = "unused";
-                               reg = <0xc0000 0x40000>;
-                       };
-                       partition@100000 {
-                               label = "ubi";
-                               reg = <0x100000 0x7e80000>;
-                       };
-                       /*
-                        * last 512 KiB are for the bad block table, not writable
-                        */
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@168c,002d {
-               compatible = "pci168c,002d";
-               reg = <0x7000 0 0 0 0>;
-               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-               qca,disable-5ghz;
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN1000B.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN1000B.dts
deleted file mode 100644 (file)
index 8982c27..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN1000B.dts
+++ /dev/null
@@ -1,173 +0,0 @@
-/dts-v1/;
-
-#include "amazonse.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
-       model = "Netgear DGN1000B";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-
-               led-dsl = &dsl;
-               led-internet = &online_green;
-       };
-
-       memory@0 {
-               reg = <0x0 0x1000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               dsl: dsl {
-                       label = "dgn1000b:green:dsl";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-               online_green: online {
-                       label = "dgn1000b:green:online";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-               online2 {
-                       label = "dgn1000b:red:online";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-               wps {
-                       label = "dgn1000b:green:wps";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-               power: power {
-                       label = "dgn1000b:green:power";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               /*
-                       power red is missing
-               */
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               asc {
-                       lantiq,groups = "asc";
-                       lantiq,function = "asc";
-               };
-               keys_in {
-                       lantiq,pins = "io0",/* "io25", */"io29";
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <1>;
-               };
-       };
-       pins_spi_default: pins_spi_default {
-               spi_in {
-                       lantiq,groups = "spi_di";
-                       lantiq,function = "spi";
-               };
-               spi_out {
-                       lantiq,groups = "spi_do", "spi_clk",
-                               "spi_cs1";
-                       lantiq,function = "spi";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "mii";
-       mac-address = [ 00 11 22 33 44 55 ];
-};
-
-&spi {
-       status = "okay";
-       pinctrl-names = "default";
-       pinctrl-0 = <&pins_spi_default>;
-
-       m25p80@1 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <1 0>;
-               spi-max-frequency = <5000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x0 0x20000>;
-                               label = "SPI (RO) U-Boot Image";
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               reg = <0x20000 0x10000>;
-                               label = "ENV_MAC";
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               reg = <0x30000 0x10000>;
-                               label = "DPF";
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               reg = <0x40000 0x10000>;
-                               label = "NVRAM";
-                               read-only;
-                       };
-
-                       partition@500000 {
-                               reg = <0x50000 0x003a0000>;
-                               label = "kernel";
-                       };
-               };
-       };
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-&usb {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN3500.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN3500.dts
deleted file mode 100644 (file)
index 98a2ebd..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN3500.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "DGN3500.dtsi"
-
-/ {
-       compatible = "netgear,dgn3500", "lantiq,xway", "lantiq,ar9";
-       model = "Netgear DGN3500";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN3500.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN3500.dtsi
deleted file mode 100644 (file)
index 614845f..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN3500.dtsi
+++ /dev/null
@@ -1,213 +0,0 @@
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       chosen {
-               bootargs = "root= console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl;
-               led-internet = &internet;
-               led-usb = &led_usb;
-               led-wifi = &wifi_green;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       rtl8366rb {
-               compatible = "realtek,rtl8366rb";
-               gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
-               gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
-
-               realtek,initvals = <
-                       0x0000 0x0830
-                       0x0400 0x8130
-                       0x000A 0x83ED
-                       0x0F51 0x0017
-                       0x02F5 0x0048
-                       0x02FA 0xFFDF
-                       0x02FB 0xFFE0
-                       0x0450 0x0000
-                       0x0401 0x0000
-                       0x0431 0x0960
-               >;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               internet: internet {
-                       label = "dgn3500:green:internet";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-               };
-               internet2 {
-                       label = "dgn3500:red:internet";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-               };
-               dsl: dsl {
-                       label = "dgn3500:green:dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               led_usb: usb {
-                       label = "dgn3500:green:usb";
-                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-               };
-               power_green: power {
-                       label = "dgn3500:green:power";
-                       gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_red: power2 {
-                       label = "dgn3500:red:power";
-                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-               };
-               wifi_green: wifi {
-                       label = "dgn3500:green:wireless";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-               };
-               wifi2 {
-                       label = "dgn3500:amber:wireless";
-                       gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
-               };
-               wps {
-                       label = "dgn3500:green:wps";
-                       gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-               };
-               pci {
-                       lantiq,groups = "gnt1", "req1";
-                       lantiq,function = "pci";
-               };
-               pci-in {
-                       lantiq,groups = "req1";
-                       lantiq,output = <0>;
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-               };
-               pci-out {
-                       lantiq,groups = "gnt1";
-                       lantiq,output = <1>;
-                       lantiq,pull = <0>;
-               };
-       };
-       pins_spi_default: pins_spi_default {
-               spi_in {
-                       lantiq,groups = "spi_di";
-                       lantiq,function = "spi";
-               };
-               spi_out {
-                       lantiq,groups = "spi_do", "spi_clk",
-                               "spi_cs4";
-                       lantiq,function = "spi";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "mii";
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@168c,0029 {
-               compatible = "pci168c,0029";
-               reg = <0x7000 0 0 0 0>;
-               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-       };
-};
-
-&spi {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pins_spi_default>;
-
-       m25p80@4 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <4 0>;
-               spi-max-frequency = <20000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x0 0x10000>;
-                               label = "uboot";
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               reg = <0x10000 0x10000>;
-                               label = "uboot-env";
-                               read-only;
-                       };
-
-                       ath9k_cal: partition@20000 {
-                               reg = <0x20000 0x10000>;
-                               label = "calibration";
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               reg = <0x50000 0xfa0000>;
-                               label = "firmware";
-                       };
-               };
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN3500B.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN3500B.dts
deleted file mode 100644 (file)
index d1d788c..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DGN3500B.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "DGN3500.dtsi"
-
-/ {
-       compatible = "netgear,dgn3500b", "lantiq,xway", "lantiq,ar9";
-       model = "Netgear DGN3500B";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DM200.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DM200.dts
deleted file mode 100644 (file)
index 8302336..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/DM200.dts
+++ /dev/null
@@ -1,216 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9";
-       model = "Netgear DM200";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_amber;
-               led-running = &power_green;
-
-               led-dsl = &dsl_green;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio_export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               annexa {
-                       gpio-export,name = "annexa";
-                       gpio-export,output = <0>;
-                       gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
-               };
-               annexb {
-                       gpio-export,name = "annexb";
-                       gpio-export,output = <0>;
-                       gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power_amber: power_amber {
-                       label = "dm200:amber:power";
-                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-               };
-               power_green: power_green {
-                       label = "dm200:green:power";
-                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-               };
-
-               lan_amber {
-                       label = "dm200:amber:lan";
-                       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               };
-               lan_green {
-                       label = "dm200:green:lan";
-                       gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-               };
-
-               dsl_amber {
-                       label = "dm200:amber:dsl";
-                       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-               };
-               dsl_green: dsl_green {
-                       label = "dm200:green:dsl";
-                       gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&eth0 {
-       lantiq,phys = <&gphy1>;
-
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-
-               ethernet@4 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy13>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-       };
-
-       pins_spi_default: pins_spi_default {
-               spi_in {
-                       lantiq,groups = "spi_di";
-                       lantiq,function = "spi";
-               };
-               spi_out {
-                       lantiq,groups = "spi_do", "spi_clk", "spi_cs4";
-                       lantiq,function = "spi";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&pcie0 {
-       status = "disabled";
-};
-
-&spi {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pins_spi_default>;
-
-       m25p80@4 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <4 0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x0 0x20000>;
-                               label = "uboot";
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               reg = <0x20000 0x10000>;
-                               label = "gphyfirmware";
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               reg = <0x30000 0x7b0000>;
-                               label = "firmware";
-                       };
-
-                       partition@7e0000 {
-                               reg = <0x7e0000 0x10000>;
-                               label = "sysconfig";
-                               read-only;
-                       };
-
-                       partition@7f0000 {
-                               reg = <0x7f0000 0x2000>;
-                               label = "ubootconfig";
-                               read-only;
-                       };
-
-                       partition@7f2000 {
-                               reg = <0x7f2000 0x1000>;
-                               label = "ART";
-                               read-only;
-                       };
-
-                       partition@7f3000 {
-                               reg = <0x7f3000 0x1000>;
-                               label = "pot";
-                               read-only;
-                       };
-
-                       partition@7f4000 {
-                               reg = <0x7f4000 0xc000>;
-                               label = "ret";
-                               read-only;
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY50712.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY50712.dts
deleted file mode 100644 (file)
index ec287ab..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY50712.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-/ {
-       compatible = "lantiq,easy50712", "lantiq,xway", "lantiq,danube";
-       model = "Intel EASY50712 Nand";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               stp {
-                       lantiq,groups = "stp";
-                       lantiq,function = "stp";
-               };
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-               };
-               pci {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-               };
-               conf_out {
-                       lantiq,pins = "io4", "io5", "io6"; /* stp */
-                       lantiq,open-drain;
-                       lantiq,pull = <0>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "rmii";
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>; /* 64 KB */
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>; /* 64 KB */
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x3d0000>;
-                       };
-
-                       partition@400000 {
-                               label = "rootfs";
-                               reg = <0x400000 0x400000>;
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY50810.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY50810.dts
deleted file mode 100644 (file)
index 21562dc..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY50810.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-/ {
-       compatible = "lantiq,easy50810", "lantiq,xway", "lantiq,ar9";
-       model = "Lantiq EASY50810";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               stp {
-                       lantiq,groups = "stp";
-                       lantiq,function = "stp";
-               };
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-               };
-               pci {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-               };
-               conf_out {
-                       lantiq,pins = "io4", "io5", "io6"; /* stp */
-                       lantiq,open-drain;
-                       lantiq,pull = <0>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "rmii";
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>; /* 64 KB */
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>; /* 64 KB */
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x3d0000>;
-                       };
-
-                       partition@400000 {
-                               label = "rootfs";
-                               reg = <0x400000 0x400000>;
-                       };
-               };
-       };
-};
-
-&stp {
-       status = "okay";
-       lantiq,shadow = <0xfff>;
-       lantiq,groups = <0x3>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY80920.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY80920.dtsi
deleted file mode 100644 (file)
index 464ab5b..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY80920.dtsi
+++ /dev/null
@@ -1,312 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-
-               led-usb = &led_usb1;
-               led-usb2 = &led_usb2;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-/*             reset {
-                       label = "reset";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };*/
-               paging {
-                       label = "paging";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_PHONE>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power: power {
-                       label = "easy80920:green:power";
-                       gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               warning {
-                       label = "easy80920:green:warning";
-                       gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
-               };
-               fxs1 {
-                       label = "easy80920:green:fxs1";
-                       gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
-               };
-               fxs2 {
-                       label = "easy80920:green:fxs2";
-                       gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
-               };
-               fxo {
-                       label = "easy80920:green:fxo";
-                       gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
-               };
-               led_usb1: usb1 {
-                       label = "easy80920:green:usb1";
-                       gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
-               };
-               led_usb2: usb2 {
-                       label = "easy80920:green:usb2";
-                       gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
-               };
-               sd {
-                       label = "easy80920:green:sd";
-                       gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
-               };
-               wps {
-                       label = "easy80920:green:wps";
-                       gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               lantiq,switch;
-
-               ethernet@4 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@1 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <1>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy1>;
-               };
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-               };
-       };
-
-       wan: interface@1 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <1>;
-               lantiq,wan;
-
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy1: ethernet-phy@1 {
-                       reg = <0x1>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy5: ethernet-phy@5 {
-                       reg = <0x5>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               exin3 {
-                       lantiq,groups = "exin3";
-                       lantiq,function = "exin";
-               };
-               stp {
-                       lantiq,groups = "stp";
-                       lantiq,function = "stp";
-               };
-               nand {
-                       lantiq,groups = "nand cle", "nand ale",
-                                       "nand rd", "nand rdy";
-                       lantiq,function = "ebu";
-               };
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               pci {
-                       lantiq,groups = "gnt1", "req1";
-                       lantiq,function = "pci";
-               };
-               conf_out {
-                       lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
-                                       "io4", "io5", "io6", /* stp */
-                                       "io21",
-                                       "io33";
-                       lantiq,open-drain;
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-               pcie-rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-               conf_in {
-                       lantiq,pins = "io39", /* exin3 */
-                                       "io48"; /* nand rdy */
-                       lantiq,pull = <2>;
-               };
-       };
-       pins_spi_default: pins_spi_default {
-               spi_in {
-                       lantiq,groups = "spi_di";
-                       lantiq,function = "spi";
-               };
-               spi_out {
-                       lantiq,groups = "spi_do", "spi_clk",
-                               "spi_cs4";
-                       lantiq,function = "spi";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&spi {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pins_spi_default>;
-
-       status = "okay";
-
-       m25p80@4 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <4 0>;
-               spi-max-frequency = <1000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x0 0x20000>;
-                               label = "SPI (RO) U-Boot Image";
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               reg = <0x20000 0x10000>;
-                               label = "ENV_MAC";
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               reg = <0x30000 0x10000>;
-                               label = "DPF";
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               reg = <0x40000 0x10000>;
-                               label = "NVRAM";
-                               read-only;
-                       };
-
-                       partition@500000 {
-                               reg = <0x50000 0x003a0000>;
-                               label = "kernel";
-                       };
-               };
-       };
-};
-
-&stp {
-       status = "okay";
-
-       lantiq,shadow = <0xffff>;
-       lantiq,groups = <0x7>;
-       lantiq,dsl = <0x3>;
-       lantiq,phy1 = <0x7>;
-       lantiq,phy2 = <0x7>;
-       /* lantiq,rising; */
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY80920NAND.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY80920NAND.dts
deleted file mode 100644 (file)
index 0134a7c..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY80920NAND.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-/dts-v1/;
-
-
-#include "EASY80920.dtsi"
-
-/ {
-       compatible = "lantiq,easy80920-nand", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
-       model = "Intel EASY80920 Nand";
-
-       chosen {
-               bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1";
-       };
-};
-
-&localbus {
-       nand@0 {
-               compatible = "lantiq,nand-xway";
-               lantiq,cs = <1>;
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x100000>; /* 1024 KB */
-                       };
-
-                       partition@100000 {
-                               label = "uboot_env";
-                               reg = <0x100000 0x40000>; /* 256 KB */
-                       };
-
-                       partition@140000 {
-                               label = "ubootconfigB";
-                               reg = <0x140000 0x40000>; /* 256 KB */
-                       };
-
-                       partition@180000 {
-                               label = "gphyfirmware";
-                               reg = <0x180000 0x40000>; /* 256 KB */
-                       };
-
-                       partition@1c0000 {
-                               label = "ubi";
-                               reg = <0x1c0000 0xc800000>;
-                       };
-
-                       partition@c9c0000 {
-                               label = "calibration";
-                               reg = <0xc9c0000 0x100000>;
-                       };
-
-                       partition@cac0000 {
-                               label = "res";
-                               reg = <0xcac0000 0x13540000>;
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY80920NOR.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY80920NOR.dts
deleted file mode 100644 (file)
index 9adc0b4..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY80920NOR.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-/dts-v1/;
-
-#include "EASY80920.dtsi"
-
-/ {
-       compatible = "lantiq,easy80920-nor", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
-       model = "Intel EASY80920 Nor";
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x10000>;
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x10000 0x10000>;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x7e0000>;
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY88388.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY88388.dts
deleted file mode 100644 (file)
index a9c5b3c..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY88388.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-       model = "Lantiq Falcon FTTDP8 Reference Board";
-       compatible = "lantiq,easy88388", "lantiq,falcon";
-
-       aliases {
-               spi0 = &ebu_cs0;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;  // 64M at 0x0
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <0x198>;
-               };
-       };
-
-       pinctrl {
-               led_pins: led-pins {
-                       lantiq,pins = "io34", "io35", "io36", "io37", "io38", 
-                                       "io39", "io40", "io41";
-                       lantiq,function = "gpio";
-               };
-       };
-
-       easy88388-leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins &bootled_pins>;
-
-               GPON {
-                       label = "easy88388:green:gpon";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               TEST {
-                       label = "easy88388:green:test";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               STATUS {
-                       label = "easy88388:green:status";
-                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               ERROR {
-                       label = "easy88388:red:error";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-
-               DSL1 {
-                       label = "easy88388:dsl:1";
-                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               DSL2 {
-                       label = "easy88388:dsl:2";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               DSL3 {
-                       label = "easy88388:dsl:3";
-                       gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               DSL4 {
-                       label = "easy88388:dsl:4";
-                       gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               DSL5 {
-                       label = "easy88388:dsl:5";
-                       gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               DSL6 {
-                       label = "easy88388:dsl:6";
-                       gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               DSL7 {
-                       label = "easy88388:dsl:7";
-                       gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               DSL8 {
-                       label = "easy88388:dsl:8";
-                       gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-
-       };
-};
-

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY88444.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY88444.dts
deleted file mode 100644 (file)
index ceb81ea..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY88444.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-       model = "Lantiq Falcon FTTdp G.FAST Reference Board";
-       compatible = "lantiq,easy88444", "lantiq,falcon";
-
-       aliases {
-               spi0 = &ebu_cs0;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;  // 64M at 0x0
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <0x198>;
-               };
-       };
-
-       pinctrl {
-               led_pins: led-pins {
-                       lantiq,pins = "io34", "io35", "io37";
-                       lantiq,function = "gpio";
-               };
-       };
-
-       easy88444-leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins &bootled_pins>;
-
-               GPON {
-                       label = "easy88444:green:gpon";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               TEST {
-                       label = "easy88444:green:test";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               STATUS {
-                       label = "easy88444:green:status";
-                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-
-               GFAST1 {
-                       label = "easy88444:gfast:1";
-                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               GFAST2 {
-                       label = "easy88444:gfast:2";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               GFAST3 {
-                       label = "easy88444:gfast:3";
-                       gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               GFAST4 {
-                       label = "easy88444:gfast:4";
-                       gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-
-       };
-};
-

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000-base.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000-base.dtsi
deleted file mode 100644 (file)
index cfe1140..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000-base.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-       compatible = "lantiq,easy98000", "lantiq,falcon";
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-
-       easy98000-leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&bootled_pins>;
-
-               LED_0 {
-                       label = "easy98000:green:gpon";
-                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_1 {
-                       label = "easy98000:red:gpon";
-                       gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_2 {
-                       label = "easy98000:green:gpon_tx";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_3 {
-                       label = "easy98000:green:gpon_rx";
-                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_4 {
-                       label = "easy98000:green:voice";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_5 {
-                       label = "easy98000:green:status";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-       };
-};
-
-&ebu_cs1 {
-       eth0: ethernet@0000000 {
-               compatible = "davicom,dm9000";
-               device_type = "network";
-               reg = <0x0000003 0x1>, <0x0000001 0x1>;
-               reg-names = "addr", "data";
-               interrupt-parent = <&gpio1>;
-               #interrupt-cells = <2>;
-               interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-               local-mac-address = [ 00 00 00 00 00 00 ];
-       };
-
-       cpld@3c00000 {
-               compatible = "lantiq,easy98000_addon";
-               reg = <0x3c00000 0x2>;
-       };
-
-       cpld@3c0000c {
-               compatible = "lantiq,easy98000_cpld_led";
-               reg = <0x3c0000c 0x2>,  <0x3c00012 0x2>;
-       };
-};
-
-/* // enable this for second uart:
-&serial1 {
-       status = "okay";
-};*/
-
-&spi {
-       status = "okay";
-
-       eeprom@1 {
-               compatible = "atmel,at25", "atmel,at25160n";
-               reg = <2>;
-               spi-max-frequency = <1000000>;
-               spi-cpha;
-               spi-cpol;
-
-               pagesize = <32>;
-               size = <2048>;
-               address-width = <16>;
-       };
-};
-
-&i2c {
-       status = "okay";
-
-       clock-frequency = <100000>;
-
-       /* eeprom-emulation by OMU */
-       eeprom@50 {
-               compatible = "at,24c02";
-               reg = <0x50>;
-       };
-       eeprom@51 {
-               compatible = "at,24c02";
-               reg = <0x51>;
-       };
-};
-

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000NAND.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000NAND.dts
deleted file mode 100644 (file)
index a40cef3..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000NAND.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "EASY98000-base.dtsi"
-
-/ {
-       model = "Lantiq Falcon (NAND)";
-       compatible = "lantiq,easy98000-nand", "lantiq,easy98000", "lantiq,falcon";
-
-       aliases {
-               spi0 = &spi;
-       };
-};
-
-&ebu_cs0 {
-       gen_nand@0 {
-               compatible = "gen_nand", "lantiq,nand-falcon";
-               bank-width = <1>;
-               reg = <0x0 0x40000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               linux,mtd-name = "gen_nand";
-               bbt-use-flash;
-
-               partition@0 {
-                       label = "uboot";
-                       reg = <0x00000 0x40000>;
-               };
-
-               partition@10000 {
-                       label = "uboot_env";
-                       reg = <0x40000 0x40000>;
-               };
-
-               partition@20000 {
-                       label = "linux";
-                       reg = <0x80000 0x3d0000>;
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000NOR.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000NOR.dts
deleted file mode 100644 (file)
index ad53bf9..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000NOR.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "EASY98000-base.dtsi"
-
-/ {
-       model = "Lantiq Falcon (NOR)";
-       compatible = "lantiq,easy98000-nor", "lantiq,easy98000", "lantiq,falcon";
-
-       aliases {
-               spi0 = &spi;
-       };
-};
-
-&ebu_cs0 {
-       cfi@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0x0 0x4000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "uboot";
-                       reg = <0x00000 0x40000>;
-               };
-
-               partition@10000 {
-                       label = "uboot_env";
-                       reg = <0x40000 0x40000>;
-               };
-
-               partition@20000 {
-                       label = "linux";
-                       reg = <0x80000 0x3d0000>;
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000SFLASH.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000SFLASH.dts
deleted file mode 100644 (file)
index bbe524e..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98000SFLASH.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "EASY98000-base.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-       model = "Lantiq Falcon (SFLASH)";
-       compatible = "lantiq,easy98000-sflash", "lantiq,easy98000", "lantiq,falcon";
-
-       aliases {
-               spi0 = &ebu_cs0;
-               spi1 = &spi;
-       };
-};
-

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98020.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98020.dts
deleted file mode 100644 (file)
index c0970ef..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98020.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-       model = "Lantiq Falcon Reference Board";
-       compatible = "lantiq,easy98020", "lantiq,falcon";
-
-       aliases {
-               spi0 = &ebu_cs0;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;  // 64M at 0x0
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <0x198>;
-               };
-       };
-
-       pinctrl {
-               led_pins: phy-led-pins {
-                       lantiq,pins = "io42", "io41", "io38", "io37";
-                       lantiq,function = "gpio";
-               };
-       };
-
-       easy98020-leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&bootled_pins>;
-
-               GPON {
-                       label = "easy98020:green:gpon";
-                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               TEST {
-                       label = "easy98020:green:test";
-                       gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               ETH {
-                       label = "easy98020:green:status";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               VOICE {
-                       label = "easy98020:green:voice";
-                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               VIDEO {
-                       label = "easy98020:green:video";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-       };
-
-       easy98020-phy-leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins>;
-
-               GE0_ACT {
-                       label = "easy98020:ge0_act";
-                       gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               GE0_LINK {
-                       label = "easy98020:ge0_link";
-                       gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               GE1_ACT {
-                       label = "easy98020:ge1_act";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-               GE1_LINK {
-                       label = "easy98020:ge1_link";
-                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98020V18.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98020V18.dts
deleted file mode 100644 (file)
index 9aa1be9..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98020V18.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-       model = "Lantiq Falcon Reference Board V1.8";
-       compatible = "lantiq,easy98020-v18", "lantiq,easy98020", "lantiq,falcon";
-
-       aliases {
-               spi0 = &ebu_cs0;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;  // 64M at 0x0
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <0x198>;
-               };
-       };
-
-       pinctrl {
-               led_pins: led-pins {
-                       lantiq,pins = "io11", "io14", "io36", "io37", "io38";
-                       lantiq,function = "gpio";
-               };
-       };
-
-       easy98020-leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins &bootled_pins>;
-
-               GPON {
-                       label = "easy98020:green:gpon";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               TEST {
-                       label = "easy98020:green:test";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               ETH {
-                       label = "easy98020:green:status";
-                       gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               VOICE {
-                       label = "easy98020:green:voice";
-                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               VIDEO {
-                       label = "easy98020:green:video";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98021.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98021.dts
deleted file mode 100644 (file)
index 7b2e490..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98021.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-       model = "Lantiq Falcon HGU Reference Board";
-       compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon";
-
-       aliases {
-               spi0 = &ebu_cs0;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;  // 64M at 0x0
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <0x198>;
-               };
-       };
-
-       gpio-mmc {
-               /* Place-holder for SIM-Card connector,
-                  to list the used GPIOs, no official binding */
-               compatible = "gpio-mmc";
-               gpios =  <&gpio0 3 GPIO_ACTIVE_HIGH>,
-                        <&gpio0 3 GPIO_ACTIVE_HIGH>,
-                        <&gpio0 2 GPIO_ACTIVE_HIGH>,
-                        <0>; /* no CS */
-               gpio-names = "di", "do", "clk", "cs";
-               reset-gpio =  <&gpio3 24 GPIO_ACTIVE_HIGH>;
-       };
-
-       pinctrl {
-               led_pins: led-pins {
-                       lantiq,pins = "io11", "io14", "io36", "io37", "io38";
-                       lantiq,function = "gpio";
-               };
-       };
-
-       easy98021-leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins &bootled_pins>;
-
-               GPON {
-                       label = "easy98021:green:gpon";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               TEST {
-                       label = "easy98021:red:test";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               ETH {
-                       label = "easy98021:green:status";
-                       gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               VOICE {
-                       label = "easy98021:green:voice";
-                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               SIMCARD {
-                       label = "easy98021:green:simcard";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-       };
-};
-

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98035SYNCE.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98035SYNCE.dts
deleted file mode 100644 (file)
index df941cd..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98035SYNCE.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-       model = "Lantiq Falcon SFP Stick with SyncE";
-       compatible = "lantiq,easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon";
-
-       aliases {
-               spi0 = &ebu_cs0;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;  // 64M at 0x0
-       };
-
-       pinctrl {
-               compatible = "lantiq,pinctrl-falcon";
-
-               asc0_func1: func1 {
-                       func1_tx {
-                               lantiq,pins = "io32";
-                               lantiq,mux = <1>;
-                               lantiq,input = <0>;
-                       };
-                       func1_rx {
-                               lantiq,pins = "io33";
-                               lantiq,mux = <0>;
-                       };
-               };
-               asc0_func2: func2 {
-                       func2_tx {
-                               lantiq,pins = "io32";
-                               lantiq,mux = <0>;
-                       };
-                       func2_rx {
-                               lantiq,pins = "io33";
-                               lantiq,mux = <1>;
-                               lantiq,input = <0>;
-                       };
-               };
-               asc0_func3: func3 {
-                       func3_tx {
-                               lantiq,pins = "io32";
-                               lantiq,mux = <1>;
-                               lantiq,input = <0>;
-                       };
-                       func3_rx {
-                               lantiq,pins = "io33";
-                               lantiq,mux = <1>;
-                               lantiq,input = <0>;
-                       };
-               };
-       };
-
-       pinselect-asc0 {
-               compatible = "lantiq,pinselect-asc0";
-               pinctrl-names = "asc0", "func1", "func2", "func3";
-               pinctrl-0 = <&asc0_pins>;
-               pinctrl-1 = <&asc0_func1>;
-               pinctrl-2 = <&asc0_func2>;
-               pinctrl-3 = <&asc0_func3>;
-       };
-};
-
-&serial0 {
-       pinctrl-names = "default";
-       /* use "empty" pinctrl to leave setting from u-boot enabled */
-       pinctrl-0 = < >;
-};
-
-&i2c {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98035SYNCE1588.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98035SYNCE1588.dts
deleted file mode 100644 (file)
index a3abc6e..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/EASY98035SYNCE1588.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-       model = "Lantiq Falcon SFP Stick with SyncE/1588";
-       compatible = "lantiq,easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon";
-
-       aliases {
-               spi0 = &ebu_cs0;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;  // 64M at 0x0
-       };
-
-       pinctrl {
-               compatible = "lantiq,pinctrl-falcon";
-
-               asc0_func1: func1 {
-                       func1_tx {
-                               lantiq,pins = "io32";
-                               lantiq,mux = <1>;
-                               lantiq,input = <0>;
-                       };
-                       func1_rx {
-                               lantiq,pins = "io33";
-                               lantiq,mux = <0>;
-                       };
-               };
-               asc0_func2: func2 {
-                       func2_tx {
-                               lantiq,pins = "io32";
-                               lantiq,mux = <0>;
-                       };
-                       func2_rx {
-                               lantiq,pins = "io33";
-                               lantiq,mux = <1>;
-                               lantiq,input = <0>;
-                       };
-               };
-               asc0_func3: func3 {
-                       func3_tx {
-                               lantiq,pins = "io32";
-                               lantiq,mux = <1>;
-                               lantiq,input = <0>;
-                       };
-                       func3_rx {
-                               lantiq,pins = "io33";
-                               lantiq,mux = <1>;
-                               lantiq,input = <0>;
-                       };
-               };
-       };
-
-       pinselect-asc0 {
-               compatible = "lantiq,pinselect-asc0";
-               pinctrl-names = "asc0", "func1", "func2", "func3";
-               pinctrl-0 = <&asc0_pins>;
-               pinctrl-1 = <&asc0_func1>;
-               pinctrl-2 = <&asc0_func2>;
-               pinctrl-3 = <&asc0_func3>;
-       };
-};
-
-&serial0 {
-       pinctrl-names = "default";
-       /* use "empty" pinctrl to leave setting from u-boot enabled */
-       pinctrl-0 = < >;
-};
-
-&i2c {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FALCON-MDU.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FALCON-MDU.dts
deleted file mode 100644 (file)
index 6710bbe..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FALCON-MDU.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-       model = "Lantiq Falcon / Vinax MDU Board";
-       compatible = "lantiq,falcon-mdu", "lantiq,falcon";
-
-       aliases {
-               spi0 = &ebu_cs0;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;  // 64M at 0x0
-       };
-
-       mdu-leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&bootled_pins>;
-
-               LED_0 {
-                       label = "mdu:green:gpon";
-                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_1 {
-                       label = "mdu:green:status";
-                       gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_2 {
-                       label = "mdu:green:2";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_3 {
-                       label = "mdu:green:3";
-                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               LED_4 {
-                       label = "mdu:green:4";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-       };
-};
-

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FALCON-SFP.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FALCON-SFP.dts
deleted file mode 100644 (file)
index 8d45de4..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FALCON-SFP.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
-       model = "Lantiq Falcon SFP Stick";
-       compatible = "lantiq,falcon-sfp", "lantiq,falcon";
-
-       aliases {
-               spi0 = &ebu_cs0;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;  // 64M at 0x0
-       };
-
-       pinctrl {
-               compatible = "lantiq,pinctrl-falcon";
-
-               asc0_func1: func1 {
-                       func1_tx {
-                               lantiq,pins = "io32";
-                               lantiq,mux = <1>;
-                               lantiq,output = <0>;
-                       };
-                       func1_rx {
-                               lantiq,pins = "io33";
-                               lantiq,mux = <0>;
-                       };
-               };
-               asc0_func2: func2 {
-                       func2_tx {
-                               lantiq,pins = "io32";
-                               lantiq,mux = <0>;
-                       };
-                       func2_rx {
-                               lantiq,pins = "io33";
-                               lantiq,mux = <1>;
-                               lantiq,input = <0>;
-                       };
-               };
-               asc0_func3: func3 {
-                       func3_tx {
-                               lantiq,pins = "io32";
-                               lantiq,mux = <1>;
-                               lantiq,output = <0>;
-                       };
-                       func3_rx {
-                               lantiq,pins = "io33";
-                               lantiq,mux = <1>;
-                               lantiq,input = <0>;
-                       };
-               };
-       };
-
-       pinselect-asc0 {
-               compatible = "lantiq,pinselect-asc0";
-               pinctrl-names = "asc0", "func1", "func2", "func3";
-               pinctrl-0 = <&asc0_pins>;
-               pinctrl-1 = <&asc0_func1>;
-               pinctrl-2 = <&asc0_func2>;
-               pinctrl-3 = <&asc0_func3>;
-       };
-};
-
-&serial0 {
-       pinctrl-names = "default";
-       /* use "empty" pinctrl to leave setting from u-boot enabled */
-       pinctrl-0 = < >;
-};
-
-&i2c {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FRITZ3370.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FRITZ3370.dts
deleted file mode 100644 (file)
index a958fc6..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FRITZ3370.dts
+++ /dev/null
@@ -1,296 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "avm,fritz3370", "lantiq,xway", "lantiq,vr9";
-       model = "Fritz!Box WLAN 3370";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl;
-               led-internet = &info_green;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x8000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-               power {
-                       label = "power";
-                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-                       linux,code = <KEY_POWER>;
-               };
-/*             wifi {
-                       label = "wifi";
-                       gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-                       linux,code = <BTN_1>;
-               };*/
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power_green: power {
-                       label = "fritz3370:green:power";
-                       gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_red: power2 {
-                       label = "fritz3370:red:power";
-                       gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
-               };
-               info_red {
-                       label = "fritz3370:red:info";
-                       gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "fritz3370:green:wlan";
-                       gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-               };
-               dsl: dsl {
-                       label = "fritz3370:green:dsl";
-                       gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-               };
-               lan {
-                       label = "fritz3370:green:lan";
-                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-               };
-               info_green: info_green {
-                       label = "fritz3370:green:info";
-                       gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&urlader 0x987>;
-               mtd-mac-address-increment = <(-2)>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-                       gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
-               };
-               ethernet@1 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <1>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy1>;
-                       gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy1: ethernet-phy@1 {
-                       reg = <0x1>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               nand {
-                       lantiq,groups = "nand cle", "nand ale",
-                                       "nand rd", "nand cs1", "nand rdy";
-                       lantiq,function = "ebu";
-                       lantiq,pull = <1>;
-               };
-               phy-rst {
-                       lantiq,pins = "io37", "io44";
-                       lantiq,pull = <0>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               pcie-rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-       pins_spi_default: pins_spi_default {
-               spi_in {
-                       lantiq,groups = "spi_di";
-                       lantiq,function = "spi";
-               };
-               spi_out {
-                       lantiq,groups = "spi_do", "spi_clk",
-                               "spi_cs4";
-                       lantiq,function = "spi";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&localbus {
-       nand@1 {
-               compatible = "lantiq,nand-xway";
-               bank-width = <2>;
-               reg = <1 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "kernel";
-                               reg = <0x0 0x400000>;
-                       };
-
-                       partition@400000 {
-                               label = "rootfs_ubi";
-                               reg = <0x400000 0x3000000>;
-                       };
-
-                       partition@3400000 {
-                               label = "vr9_firmware";
-                               reg = <0x3400000 0x400000>;
-                       };
-                       partition@3800000 {
-                               label = "reserved";
-                               reg = <0x3800000 0x3000000>;
-                       };
-                       partition@6800000 {
-                               label = "config";
-                               reg = <0x6800000 0x200000>;
-                       };
-                       partition@6a00000 {
-                               label = "nand-filesystem";
-                               reg = <0x6a00000 0x1600000>;
-                       };
-               };
-       };
-};
-
-&pcie0 {
-       pcie@0 {
-               reg = <0 0 0 0 0>;
-               #interrupt-cells = <1>;
-               #size-cells = <2>;
-               #address-cells = <3>;
-               device_type = "pci";
-
-               wifi@0,0 {
-                       compatible = "pci0,0";
-                       reg = <0 0 0 0 0>;
-                       qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
-               };
-       };
-};
-
-&spi {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pins_spi_default>;
-
-       m25p80@4 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <4 0>;
-               spi-max-frequency = <1000000>;
-
-               urlader: partition@0 {
-                       reg = <0x0 0x20000>;
-                       label = "urlader";
-                       read-only;
-               };
-
-               partition@20000 {
-                       reg = <0x20000 0x10000>;
-                       label = "tffs (1)";
-                       read-only;
-               };
-
-               partition@30000 {
-                       reg = <0x30000 0x10000>;
-                       label = "tffs (2)";
-                       read-only;
-               };
-       };
-};
-
-/*
- * TODO: add phy-supply, gpio 5 GPIO_ACTIVE_HIGH and gpio 14 GPIO_ACTIVE_HIGH are
- * related
- */
-&usb_phy0 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FRITZ7320.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FRITZ7320.dts
deleted file mode 100644 (file)
index eed4ae3..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FRITZ7320.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
-       model = "1&1 HomeServer";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-
-               led-internet = &info_green;
-               led-dsl = &power;
-               led-wifi = &wlan;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               dect {
-                       label = "dect";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_PHONE>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power: power {
-                       label = "fritz7320:green:power";
-                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               voice {
-                       label = "fritz7320:green:fon";
-                       gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-               };
-               dect {
-                       label = "fritz7320:green:dect";
-                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-               };
-               wlan: wlan {
-                       label = "fritz7320:green:wlan";
-                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-               };
-               info_green: info_green {
-                       label = "fritz7320:green:info";
-                       gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-               };
-               info_red {
-                       label = "fritz7320:red:info";
-                       gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               pci {
-                       lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
-                       lantiq,function = "pci";
-               };
-               pci-in {
-                       lantiq,groups = "req1", "req2", "req3", "req4";
-                       lantiq,output = <0>;
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-               };
-               pci-out {
-                       lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
-                       lantiq,output = <1>;
-                       lantiq,pull = <0>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "mii";
-       mtd-mac-address = <&ath9k_cal 0xa91>;
-       mtd-mac-address-increment = <(-2)>;
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x1000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       ath9k_cal: partition@0 {
-                               label = "urlader";
-                               reg = <0x00000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0xf60000>;
-                       };
-
-                       partition@f80000 {
-                               label = "tffs (1)";
-                               reg = <0xf80000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@fc0000 {
-                               label = "tffs (2)";
-                               reg = <0xfc0000 0x40000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       req-mask = <0xf>;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@0,0 {
-               compatible = "pci0,0";
-               reg = <0x7000 0 0 0 0>;
-               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FRITZ7360SL.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FRITZ7360SL.dts
deleted file mode 100644 (file)
index a0f5d8e..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/FRITZ7360SL.dts
+++ /dev/null
@@ -1,239 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "avm,fritz7360sl", "lantiq,xway", "lantiq,vr9";
-       model = "1&1 HomeServer";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &info_green;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x8000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-               dect {
-                       label = "dect";
-                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-                       linux,code = <KEY_PHONE>;
-               };
-               wifi {
-                       label = "wifi";
-                       gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-                       linux,code = <KEY_WLAN>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power_green: power {
-                       label = "fritz7360sl:green:power";
-                       gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_red: power2 {
-                       label = "fritz7360sl:red:power";
-                       gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
-               };
-               info_red {
-                       label = "fritz7360sl:red:info";
-                       gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-               };
-               info_green: info_green {
-                       label = "fritz7360sl:green:info";
-                       gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "fritz7360sl:green:wlan";
-                       gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-               };
-               dect {
-                       label = "fritz7360sl:green:dect";
-                       gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&urlader 0xa91>;
-               mtd-mac-address-increment = <(-2)>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rmii";
-                       phy-handle = <&phy0>;
-               };
-               ethernet@1 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <1>;
-                       phy-mode = "rmii";
-                       phy-handle = <&phy1>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x00>;
-                       compatible = "ethernet-phy-ieee802.3-c22";
-                       reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-               };
-               phy1: ethernet-phy@1 {
-                       reg = <0x01>;
-                       compatible = "ethernet-phy-ieee802.3-c22";
-                       reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               phy-rst {
-                       lantiq,pins = "io37", "io44";
-                       lantiq,pull = <0>;
-                       lantiq,open-drain;
-                       lantiq,output = <1>;
-               };
-               pcie-rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x1000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       urlader: partition@0 {
-                               label = "urlader";
-                               reg = <0x00000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0xf60000>;
-                       };
-
-                       partition@f80000 {
-                               label = "tffs (1)";
-                               reg = <0xf80000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@fc0000 {
-                               label = "tffs (2)";
-                               reg = <0xfc0000 0x40000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pcie0 {
-       pcie@0 {
-               reg = <0 0 0 0 0>;
-               #interrupt-cells = <1>;
-               #size-cells = <2>;
-               #address-cells = <3>;
-               device_type = "pci";
-
-               wifi@168c,002e {
-                       compatible = "pci168c,002e";
-                       reg = <0 0 0 0 0>;
-                       qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
-               };
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-};
-
-&usb_phy1 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/GIGASX76X.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/GIGASX76X.dts
deleted file mode 100644 (file)
index fc028bb..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/GIGASX76X.dts
+++ /dev/null
@@ -1,130 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube";
-       model = "Gigaset SX761,SX762,SX763";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio_export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               switch {
-                       gpio-export,name = "switch";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 29 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               stp {
-                       lantiq,groups = "stp";
-                       lantiq,function = "stp";
-               };
-       };
-};
-
-
-&gpiomm {
-       status = "okay";
-       lantiq,shadow = <0x3>;
-};
-
-&gpios {
-       status = "okay";
-};
-
-&gsw {
-       phy-mode = "rmii";
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x0 0x30000>;
-                       };
-
-                       partition@10000 {
-                               label = "uboot_env";
-                               reg = <0x30000 0x10000>;
-                       };
-
-                       partition@40000 {
-                               label = "firmware";
-                               reg = <0x40000 0x7c0000>;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_phy {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/H201L.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/H201L.dts
deleted file mode 100644 (file)
index 43a4b42..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/H201L.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "zte,h201l", "lantiq,xway", "lantiq,ar9";
-       model = "ZTE H210L";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_green;
-               led-running = &power_green;
-
-               led-dsl = &dsl;
-               led-internet = &online;
-               led-usb = &led_usb;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power_green: power {
-                       label = "h201l:green:power";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               online: online {
-                       label = "h201l:green:internet";
-                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-               };
-               dsl: dsl {
-                       label = "h201l:green:dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               phone {
-                       label = "h201l:green:phone";
-                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-               };
-               wps {
-                       label = "h201l:green:wps";
-                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "h201l:green:wlan";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               led_usb: usb {
-                       label = "h201l:green:usb";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       gpio_export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               switch {
-                       gpio-export,name = "switch";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
-               };
-               usb {
-                       gpio-export,name = "usb";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
-               };
-               wifi {
-                       gpio-export,name = "wifi";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-       };
-};
-
-&gsw {
-       phy-mode = "rgmii";
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "uboot_env";
-                               reg = <0x20000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "firmware";
-                               reg = <0x30000 0x7d0000>;
-                       };
-               };
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-
-&usb0 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2601HNFX.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2601HNFX.dts
deleted file mode 100644 (file)
index 267a4f3..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2601HNFX.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
-       model = "ZyXEL P-2601HN-Fx";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl;
-               led-internet = &online;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power_green: power {
-                       label = "p2601hnfx:green:power";
-                       gpios = <&stp 11 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_red: power2 {
-                       label = "p2601hnfx:red:power";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-               };
-               online: online {
-                       label = "p2601hnfx:green:internet";
-                       gpios = <&stp 13 GPIO_ACTIVE_LOW>;
-               };
-               online2 {
-                       label = "p2601hnfx:red:internet";
-                       gpios = <&stp 12 GPIO_ACTIVE_LOW>;
-               };
-               dsl: dsl {
-                       label = "p2601hnfx:green:dsl";
-                       gpios = <&stp 14 GPIO_ACTIVE_LOW>;
-               };
-               phone {
-                       label = "p2601hnfx:green:phone";
-                       gpios = <&stp 9 GPIO_ACTIVE_LOW>;
-               };
-               phone2 {
-                       label = "p2601hnfx:orange:phone";
-                       gpios = <&stp 8 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "p2601hnfx:green:wireless";
-                       gpios = <&stp 15 GPIO_ACTIVE_LOW>;
-               };
-               wifi2 {
-                       label = "p2601hnfx:orange:wireless";
-                       gpios = <&stp 10 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       gpio_export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               switch {
-                       gpio-export,name = "switch";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               stp {
-                       lantiq,groups = "stp";
-                       lantiq,function = "stp";
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               exin {
-                       lantiq,groups = "exin1";
-                       lantiq,function = "exin";
-               };
-               pci {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-               };
-               conf_out {
-                       lantiq,pins = "io4", "io5", "io6";
-                       lantiq,open-drain;
-                       lantiq,pull = <0>;
-               };
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gsw {
-       phy-mode = "rmii";
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "uboot_env";
-                               reg = <0x40000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "firmware";
-                               reg = <0x60000 0xfa0000>;
-                       };
-               };
-       };
-};
-
-&stp {
-       lantiq,shadow = <0xfff>;
-       lantiq,groups = <0x3>;
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2812HNUF1.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2812HNUF1.dts
deleted file mode 100644 (file)
index 911a2d6..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2812HNUF1.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/dts-v1/;
-
-#include "P2812HNUFX.dtsi"
-
-/ {
-       compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
-       model = "ZyXEL P-2812HNU-F1";
-
-       aliases {
-               led-usb = &led_usb1;
-               led-usb2 = &led_usb2;
-       };
-
-       gpio-leds {
-               led_usb1: usb1 {
-                       label = "p2812hnuf1:green:usb1";
-                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-               };
-               led_usb2: usb2 {
-                       label = "p2812hnuf1:green:usb2";
-                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&localbus {
-       nand@0 {
-               compatible = "lantiq,nand-xway";
-               lantiq,cs = <1>;
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>;
-                       };
-                       partition@40000 {
-                               label = "uboot-env";
-                               reg = <0x40000 0x20000>;
-                       };
-                       partition@60000 {
-                               label = "kernel";
-                               reg = <0x60000 0x200000>;
-                       };
-                       partition@260000 {
-                               label = "ubi";
-                               reg = <0x260000 0x7da0000>;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       wifi@1814,3062 {
-               compatible = "pci1814,3062";
-               reg = <0x7000 0 0 0 0>;
-               ralink,eeprom = "RT3062.eeprom";
-       };
-};
-
-&pcie0 {
-       status = "disabled";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2812HNUF3.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2812HNUF3.dts
deleted file mode 100644 (file)
index 202226a..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2812HNUF3.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-/dts-v1/;
-
-#include "P2812HNUFX.dtsi"
-
-/ {
-       compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
-       model = "ZyXEL P-2812HNU-F3";
-};
-
-&pci0 {
-       wifi@1814,3092 {
-               compatible = "pci1814,3092";
-               reg = <0x7000 0 0 0 0>;
-               ralink,eeprom = "RT3092.eeprom";
-       };
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x800000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x0 0x50000>;
-                               read-only;
-                       };
-                       partition@50000 {
-                               label = "uboot-env";
-                               reg = <0x50000 0x10000>;
-                       };
-                       partition@60000 {
-                               label = "unused";
-                               reg = <0x60000 0x7a0000>;
-                       };
-               };
-       };
-
-       nand@1 {
-               compatible = "lantiq,nand-xway";
-               lantiq,cs = <1>;
-               bank-width = <2>;
-               reg = <1 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "kernel";
-                       reg = <0x0 0x200000>;
-               };
-               partition@200000 {
-                       label = "ubi";
-                       reg = <0x200000 0x7e00000>;
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2812HNUFX.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2812HNUFX.dtsi
deleted file mode 100644 (file)
index 03858af..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/P2812HNUFX.dtsi
+++ /dev/null
@@ -1,297 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl_green;
-               led-internet = &internet_green;
-               led-wifi = &wireless_green;
-       };
-
-       memory@0 {
-               reg = <0x0 0x8000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               internet_red {
-                       label = "p2812hnufx:red:internet";
-                       gpios = <&stp 16 GPIO_ACTIVE_LOW>;
-               };
-               internet_green: internet_green {
-                       label = "p2812hnufx:green:internet";
-                       gpios = <&stp 17 GPIO_ACTIVE_LOW>;
-               };
-               dsl_green: dsl_green {
-                       label = "p2812hnufx:green:dsl";
-                       gpios = <&stp 18 GPIO_ACTIVE_LOW>;
-               };
-               dsl_orange {
-                       label = "p2812hnufx:orange:dsl";
-                       gpios = <&stp 19 GPIO_ACTIVE_LOW>;
-               };
-               wireless_orange {
-                       label = "p2812hnufx:orange:wlan";
-                       gpios = <&stp 20 GPIO_ACTIVE_LOW>;
-               };
-               wireless_green: wireless_green {
-                       label = "p2812hnufx:green:wlan";
-                       gpios = <&stp 21 GPIO_ACTIVE_LOW>;
-               };
-               power_red: power {
-                       label = "p2812hnufx:red:power";
-                       gpios = <&stp 22 GPIO_ACTIVE_LOW>;
-               };
-               power_green: power2 {
-                       label = "p2812hnufx:green:power";
-                       gpios = <&stp 23 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               phone1 {
-                       label = "p2812hnufx:green:phone";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-               };
-               phone1warn {
-                       label = "p2812hnufx:orange:phone";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-               phone2warn {
-                       label = "p2812hnufx:orange:phone2";
-                       gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
-               };
-               phone2 {
-                       label = "p2812hnufx:green:phone2";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mac-address = [ 00 11 22 33 44 55 ];
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-               };
-               ethernet@1 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <1>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy1>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@4 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy1: ethernet-phy@1 {
-                       reg = <0x1>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy5: ethernet-phy@5 {
-                       reg = <0x5>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               exin3 {
-                       lantiq,groups = "exin3";
-                       lantiq,function = "exin";
-               };
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               gphy-leds {
-                       lantiq,groups = "gphy0 led1", "gphy1 led1",
-                                       "gphy0 led2", "gphy1 led2";
-                       lantiq,function = "gphy";
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               stp {
-                       lantiq,groups = "stp";
-                       lantiq,function = "stp";
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               pci-in {
-                       lantiq,groups = "req1";
-                       lantiq,function = "pci";
-                       lantiq,output = <0>;
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-               };
-               pci-out {
-                       lantiq,groups = "gnt1";
-                       lantiq,function = "pci";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <2>;
-               };
-               pcie-rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-               ifxhcd-rst {
-                       lantiq,pins = "io33";
-                       lantiq,pull = <0>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               nand_out {
-                       lantiq,groups = "nand cle", "nand ale";
-                       lantiq,function = "ebu";
-                       lantiq,output = <1>;
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-               nand_cs1 {
-                       lantiq,groups = "nand cs1";
-                       lantiq,function = "ebu";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&stp {
-       status = "okay";
-
-       lantiq,shadow = <0xffffff>;
-       lantiq,groups = <0x7>;
-       lantiq,dsl = <0x0>;
-       lantiq,phy1 = <0x0>;
-       lantiq,phy2 = <0x0>;
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb_phy1 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/TDW8970.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/TDW8970.dts
deleted file mode 100644 (file)
index 25eb3da..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/TDW8970.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "TDW89X0.dtsi"
-
-/ {
-       compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
-       model = "TP-LINK TD-W8970";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/TDW8980.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/TDW8980.dts
deleted file mode 100644 (file)
index 76875e7..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/TDW8980.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/dts-v1/;
-
-#include "TDW89X0.dtsi"
-
-/ {
-       compatible = "tplink,tdw8980", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
-       model = "TP-LINK TD-W8980";
-
-       gpio-leds {
-               wifi2 {
-                       label = "tdw8980:green:wlan5ghz";
-                       gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio {
-       state_default: pinmux {
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,output = <1>;
-                       lantiq,open-drain;
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       lantiq,bus-clock = <33333333>;
-       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-       interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/TDW89X0.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/TDW89X0.dtsi
deleted file mode 100644 (file)
index e176bca..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/TDW89X0.dtsi
+++ /dev/null
@@ -1,298 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               /* the power led can't be controlled, use the wps led instead */
-               led-boot = &wps;
-               led-failsafe = &wps;
-
-               led-dsl = &dsl;
-               led-internet = &internet;
-               led-wifi = &wifi;
-               led-usb = &led_usb0;
-               led-usb2 = &led_usb2;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-                       linux,code = <KEY_RFKILL>;
-                       linux,input-type = <EV_SW>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               /*
-                       power is not controllable via gpio
-               */
-               dsl: dsl {
-                       label = "tdw89x0:green:dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
-               };
-               internet: internet {
-                       label = "tdw89x0:green:internet";
-                       gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_usb0: usb0 {
-                       label = "tdw89x0:green:usb";
-                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-               };
-               led_usb2: usb2 {
-                       label = "tdw89x0:green:usb2";
-                       gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
-               };
-               wps: wps {
-                       label = "tdw89x0:green:wps";
-                       gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       wifi-leds {
-               compatible = "gpio-leds";
-
-               wifi: wifi {
-                       label = "tdw89x0:green:wifi";
-                       gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&ath9k_cal 0xf100>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-               };
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy5: ethernet-phy@5 {
-                       reg = <0x5>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               gphy-leds {
-                       lantiq,groups = "gphy0 led1", "gphy1 led1";
-                       lantiq,function = "gphy";
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               phy-rst {
-                       lantiq,pins = "io42";
-                       lantiq,pull = <0>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               pcie-rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-       pins_spi_default: pins_spi_default {
-               spi_in {
-                       lantiq,groups = "spi_di";
-                       lantiq,function = "spi";
-               };
-               spi_out {
-                       lantiq,groups = "spi_do", "spi_clk",
-                               "spi_cs4";
-                       lantiq,function = "spi";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&pcie0 {
-       pcie@0 {
-               reg = <0 0 0 0 0>;
-               #interrupt-cells = <1>;
-               #size-cells = <2>;
-               #address-cells = <3>;
-               device_type = "pci";
-
-               ath9k: wifi@168c,002e {
-                       compatible = "pci168c,002e";
-                       reg = <0 0 0 0 0>;
-                       #gpio-cells = <2>;
-                       gpio-controller;
-                       qca,no-eeprom;
-                       qca,disable-5ghz;
-                       mtd-mac-address = <&ath9k_cal 0xf100>;
-                       mtd-mac-address-increment = <2>;
-               };
-       };
-};
-
-&spi {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pins_spi_default>;
-
-       m25p80@4 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <4 0>;
-               spi-max-frequency = <33250000>;
-               m25p,fast-read;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x0 0x20000>;
-                               label = "u-boot";
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               reg = <0x20000 0x7a0000>;
-                               label = "firmware";
-                       };
-
-                       partition@7c0000 {
-                               reg = <0x7c0000 0x10000>;
-                               label = "config";
-                               read-only;
-                       };
-
-                       ath9k_cal: partition@7d0000 {
-                               reg = <0x7d0000 0x30000>;
-                               label = "boardconfig";
-                               read-only;
-                       };
-               };
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb_phy1 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VG3503J.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VG3503J.dts
deleted file mode 100644 (file)
index bb001cb..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VG3503J.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
-       model = "BT OpenReach VDSL Modem";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl;
-       };
-
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power_red: power2 {
-                       label = "vg3503j:red:power";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-               };
-               dsl: dsl {
-                       label = "vg3503j:green:dsl";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-               power_green: power {
-                       label = "vg3503j:green:power";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-       };
-};
-
-&eth0 {
-       interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-
-               lantiq,switch;
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@4 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy13>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,led1h = <0x70>;
-                       lantiq,led1l = <0x00>;
-                       lantiq,led2h = <0x00>;
-                       lantiq,led2l = <0x03>;
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                       lantiq,led1h = <0x70>;
-                       lantiq,led1l = <0x00>;
-                       lantiq,led2h = <0x00>;
-                       lantiq,led2l = <0x03>;
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               gphy-leds {
-                       lantiq,groups = "gphy0 led0", "gphy0 led1",
-                                       "gphy0 led2", "gphy1 led0",
-                                       "gphy1 led1", "gphy1 led2";
-                       lantiq,function = "gphy";
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x20000>;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x20000 0x7d0000>;
-                       };
-
-                       partition@7f0000 {
-                               label = "uboot-env";
-                               reg = <0x7f0000 0x10000>;
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7510KW22.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7510KW22.dtsi
deleted file mode 100644 (file)
index 8f22380..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7510KW22.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl;
-               led-internet = &internet_green;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               dsl: dsl {
-                       label = "vgv7510kw22:green:dsl";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-               };
-
-               internet_red {
-                       label = "vgv7510kw22:red:internet";
-                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-               };
-
-               info_red {
-                       label = "vgv7510kw22:red:info";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-
-               power_green: power {
-                       label = "vgv7510kw22:green:power";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-
-               info_green {
-                       label = "vgv7510kw22:green:info";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-
-               internet_green: internet_green {
-                       label = "vgv7510kw22:green:internet";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-
-               wifi: wifi {
-                       label = "vgv7510kw22:green:wlan";
-                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-               };
-
-               power_red: power2 {
-                       label = "vgv7510kw22:red:power";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-               };
-
-               phone {
-                       label = "vgv7510kw22:green:telefon";
-                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 47 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&boardconfig 0x16>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy1>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <3>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy12>;
-               };
-               ethernet@4 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy13>;
-               };
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy14>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy1: ethernet-phy@1 {
-                       reg = <0x1>;
-                       compatible = "ethernet-phy-ieee802.3-c22";
-               };
-
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy12: ethernet-phy@12 {
-                       reg = <0x12>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy14: ethernet-phy@14 {
-                       reg = <0x14>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               gphy-leds {
-                       lantiq,groups = "gphy0 led0", "gphy0 led1",
-                                       "gphy1 led0", "gphy1 led1";
-                       lantiq,function = "gphy";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <2>;
-                       lantiq,output = <1>;
-               };
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               pci-rst {
-                       lantiq,pins = "io21";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x1000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       boardconfig: partition@fe0000 {
-                               label = "board_config";
-                               reg = <0xfe0000 0x20000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@1814,3592 {
-               compatible = "pci1814,3592";
-               reg = <0x7000 0 0 0 0>;
-               ralink,mtd-eeprom = <&boardconfig 0x410>;
-               ralink,mtd-eeprom-swap;
-               mtd-mac-address = <&boardconfig 0x16>;
-               mtd-mac-address-increment = <1>;
-       };
-};
-
-&pcie0 {
-       status = "disabled";
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
-                        &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
-                        &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7510KW22BRN.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7510KW22BRN.dts
deleted file mode 100644 (file)
index 94b96d7..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7510KW22BRN.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-/dts-v1/;
-
-#include "VGV7510KW22.dtsi"
-
-/ {
-       compatible = "arcadyan,vgv7510kw22-brn", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
-       model = "o2 Box 6431";
-
-       sram@1f000000 {
-               cgu@103000 {
-                       lantiq,phy-clk-src = <0x2>;
-               };
-       };
-};
-
-&localbus {
-       nor@0 {
-               partitions {
-                       partition@0 {
-                               label = "Boot";
-                               reg = <0x00000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "Configuration";
-                               reg = <0x40000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@80000 {
-                               label = "Certificate";
-                               reg = <0x80000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@a0000 {
-                               label = "Special_Area";
-                               reg = <0xa0000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@c0000 {
-                               compatible = "brnboot,root-selector";
-                               label = "Primary_Setting";
-                               reg = <0xc0000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@e0000 {
-                               label = "Code_Image_0";
-                               reg = <0xe0000 0x780000>;
-                               brnboot,root-id = <0x00>;
-                               read-only;
-                       };
-
-                       partition@860000 {
-                               label = "Code_Image_1";
-                               reg = <0x860000 0x780000>;
-                               brnboot,root-id = <0x01>;
-                               read-only;
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7510KW22NOR.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7510KW22NOR.dts
deleted file mode 100644 (file)
index cc84c63..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7510KW22NOR.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-/dts-v1/;
-
-#include "VGV7510KW22.dtsi"
-
-/ {
-       compatible = "arcadyan,vgv7510kw22-nor", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
-       model = "o2 Box 6431";
-};
-
-&localbus {
-       nor@0 {
-               partitions {
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x0 0x60000>; /* 384 KiB */
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "uboot-env";
-                               reg = <0x60000 0x20000>; /* 128 KiB */
-                               read-only;
-                       };
-
-                       partition@80000 {
-                               label = "firmware";
-                               reg = <0x80000 0xf60000>; /* 15744 KiB */
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7519.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7519.dtsi
deleted file mode 100644 (file)
index 297f5f7..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7519.dtsi
+++ /dev/null
@@ -1,312 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &broadband_green;
-               led-internet = &internet_green;
-               led-wifi = &wireless_green;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               eco {
-                       label = "eco";
-                       gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-               };
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               eco {
-                       label = "vgv7519:blue:eco";
-                       gpios = <&stp 2 GPIO_ACTIVE_LOW>;
-               };
-               wps_red {
-                       label = "vgv7519:red:wps";
-                       gpios = <&stp 3 GPIO_ACTIVE_LOW>;
-               };
-               wps_green {
-                       label = "vgv7519:green:wps";
-                       gpios = <&stp 4 GPIO_ACTIVE_LOW>;
-               };
-               upgrade {
-                       label = "vgv7519:blue:upgrade";
-                       gpios = <&stp 5 GPIO_ACTIVE_LOW>;
-               };
-               tv {
-                       label = "vgv7519:green:tv";
-                       gpios = <&stp 6 GPIO_ACTIVE_LOW>;
-               };
-               internet_green: internet_green {
-                       label = "vgv7519:green:internet";
-                       gpios = <&stp 7 GPIO_ACTIVE_LOW>;
-               };
-               internet_red {
-                       label = "vgv7519:red:internet";
-                       gpios = <&stp 8 GPIO_ACTIVE_LOW>;
-               };
-               broadband_red {
-                       label = "vgv7519:red:broadband";
-                       gpios = <&stp 9 GPIO_ACTIVE_LOW>;
-               };
-               broadband_green: broadband_green {
-                       label = "vgv7519:green:broadband";
-                       gpios = <&stp 10 GPIO_ACTIVE_LOW>;
-               };
-               voice {
-                       label = "vgv7519:green:voice";
-                       gpios = <&stp 11 GPIO_ACTIVE_LOW>;
-               };
-               wireless_red {
-                       label = "vgv7519:red:wireless";
-                       gpios = <&stp 12 GPIO_ACTIVE_LOW>;
-               };
-               wireless_green: wireless_green {
-                       label = "vgv7519:green:wireless";
-                       gpios = <&stp 13 GPIO_ACTIVE_LOW>;
-               };
-               power_green: power2 {
-                       label = "vgv7519:green:power";
-                       gpios = <&stp 14 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_red: power {
-                       label = "vgv7519:red:power";
-                       gpios = <&stp 15 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&boardconfig 0x16>;
-               mtd-mac-address-increment = <1>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-               };
-               ethernet@1 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <1>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy1>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@4 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy1: ethernet-phy@1 {
-                       reg = <0x1>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy5: ethernet-phy@5 {
-                       reg = <0x5>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               stp {
-                       lantiq,groups = "stp";
-                       lantiq,function = "stp";
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-                       lantiq,pull = <0>;
-               };
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               pci-rst {
-                       lantiq,pins = "io21";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-               gphy-leds {
-                       lantiq,groups = "gphy0 led1", "gphy1 led0";
-                       lantiq,function = "gphy";
-                       lantiq,open-drain = <0>;
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       boardconfig: partition@40000 {
-                               label = "board_config";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-       wifi@1814,3091 {
-               compatible = "pci1814,3091";
-               reg = <0x7000 0 0 0 0>;
-               ralink,mtd-eeprom = <&boardconfig 0x410>;
-               ralink,mtd-eeprom-swap;
-               mtd-mac-address = <&boardconfig 0x16>;
-               mtd-mac-address-increment = <1>;
-       };
-};
-
-&pcie0 {
-       status = "disabled";
-};
-
-&stp {
-       lantiq,shadow = <0xffff>;
-       lantiq,groups = <0x3>;
-       lantiq,dsl = <0x0>;
-       lantiq,phy1 = <0x0>;
-       lantiq,phy2 = <0x0>;
-       /* lantiq,rising; */
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb_phy1 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-};
-
-&vmmc {
-       status = "okay";
-       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
-                &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
-                &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7519BRN.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7519BRN.dts
deleted file mode 100644 (file)
index 1e6a65e..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7519BRN.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/dts-v1/;
-
-#include "VGV7519.dtsi"
-
-/ {
-       compatible = "arcadyan,vgv7519-brn", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
-       model = "KPN Experiabox V8";
-};
-
-&localbus {
-       nor@0 {
-               partitions {
-                       partition@0 {
-                               label = "Boot";
-                               reg = <0x00000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               label = "Certificate";
-                               reg = <0x50000 0x10000>;
-                               read-only;
-                       };
-                       partition@60000 {
-                               label = "Special_Area";
-                               reg = <0x60000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@70000 {
-                               label = " Reserve_0";
-                               reg = <0x70000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@80000 {
-                               label = "Code_Image_0";
-                               reg = <0x80000 0x780000>;
-                               brnboot,root-id = <0x00>;
-                               read-only;
-                       };
-
-                       partition@4000000 {
-                               compatible = "brnboot,root-selector";
-                               label = "Primary_Setting";
-                               reg = <0x4000000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@4010000 {
-                               label = "Configuration";
-                               reg = <0x4010000 0x60000>;
-                               read-only;
-                       };
-
-                       partition@4070000 {
-                               label = " Reserve_1";
-                               reg = <0x4070000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@4080000 {
-                               label = "Code_Image_1";
-                               reg = <0x4080000 0x780000>;
-                               brnboot,root-id = <0x01>;
-                               read-only;
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7519NOR.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7519NOR.dts
deleted file mode 100644 (file)
index 4bdf0bc..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VGV7519NOR.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/dts-v1/;
-
-#include "VGV7519.dtsi"
-
-/ {
-       compatible = "arcadyan,vgv7519-nor", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
-       model = "KPN Experiabox V8";
-};
-
-&localbus {
-       nor@0 {
-               partitions {
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>;
-                               read-only;
-                       };
-                       partition@60000 {
-                               label = "uboot_env";
-                               reg = <0x60000 0x10000>;
-                               read-only;
-                       };
-                       partition@80000 {
-                               label = "firmware";
-                               reg = <0x80000 0xf80000>;
-                       };
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VR200v.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VR200v.dts
deleted file mode 100644 (file)
index d0fcd6f..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/VR200v.dts
+++ /dev/null
@@ -1,305 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
-       model = "TP-LINK Archer VR200v";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-
-               led-dsl = &dsl;
-               led-internet = &internet;
-               led-usb = &led_usb;
-               led-usb2 = &led_usb;
-       };
-
-       memory@0 {
-               reg = <0x0 0x7f00000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-                       linux,code = <KEY_RFKILL>;
-                       linux,input-type = <EV_SW>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-
-               dect_paging {
-                       label = "dect_paging";
-                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_PHONE>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power: power {
-                       label = "vr200v:blue:power";
-                       gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-               };
-               dsl: dsl {
-                       label = "vr200v:blue:dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               internet: internet {
-                       label = "vr200v:blue:internet";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               led_usb: usb {
-                       label = "vr200v:blue:usb";
-                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
-               };
-               eth {
-                       label = "vr200v:blue:lan";
-                       gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
-               };
-               wlan {
-                       label = "vr200v:blue:wlan";
-                       gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-               };
-               wlan5g {
-                       label = "vr200v:blue:wlan5g";
-                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-               };
-               phone {
-                       label = "vr200v:blue:phone";
-                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&romfile 0xf100>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-               };
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy5: ethernet-phy@5 {
-                       reg = <0x5>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               gphy-leds {
-                       lantiq,groups = "gphy0 led1", "gphy1 led1";
-                       lantiq,function = "gphy";
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               phy-rst {
-                       lantiq,pins = "io42";
-                       lantiq,pull = <0>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               pcie-rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-       pins_spi_default: pins_spi_default {
-               spi_in {
-                       lantiq,groups = "spi_di";
-                       lantiq,function = "spi";
-               };
-               spi_out {
-                       lantiq,groups = "spi_do", "spi_clk",
-                               "spi_cs4";
-                       lantiq,function = "spi";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&spi {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pins_spi_default>;
-
-       m25p80@4 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <4 0>;
-               spi-max-frequency = <33250000>;
-               m25p,fast-read;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x0 0x20000>;
-                               label = "u-boot";
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               reg = <0x20000 0xf90000>;
-                               label = "firmware";
-                       };
-
-                       partition@fb0000 {
-                               reg = <0xfb0000 0x10000>;
-                               label = "radioDECT";
-                               read-only;
-                       };
-
-                       partition@fc0000 {
-                               reg = <0xfc0000 0x10000>;
-                               label = "config";
-                               read-only;
-                       };
-
-                       romfile: partition@fd0000 {
-                               reg = <0xfd0000 0x10000>;
-                               label = "romfile";
-                               read-only;
-                       };
-
-                       partition@fe0000 {
-                               reg = <0xfe0000 0x10000>;
-                               label = "rom";
-                               read-only;
-                       };
-
-                       partition@ff0000 {
-                               reg = <0xff0000 0x10000>;
-                               label = "radio";
-                               read-only;
-                       };
-               };
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb_phy1 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/WBMR.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/WBMR.dts
deleted file mode 100644 (file)
index 6bee330..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/WBMR.dts
+++ /dev/null
@@ -1,199 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9";
-       model = "Buffalo WBMR-HP-G300H";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_red;
-               led-running = &power_green;
-
-               led-dsl = &dsl;
-               led-internet = &online_green;
-               led-usb = &led_usb;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-               eject {
-                       label = "eject";
-                       gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_EJECTCD>;
-               };
-               movie {
-                       label = "movie";
-                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_VIDEO>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power_green: power {
-                       label = "wbmr:green:power";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-               power_red: power2 {
-                       label = "wbmr:red:power";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               security {
-                       label = "wbmr:yellow:security";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "wbmr:green:wireless";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-               dsl: dsl {
-                       label = "wbmr:green:dsl";
-                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-               };
-               online_green: online {
-                       label = "wbmr:green:internet";
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-               };
-               online2 {
-                       label = "wbmr:red:internet";
-                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-               };
-               movie {
-                       label = "wbmr:blue:movie";
-                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-               };
-               led_usb: usb {
-                       label = "wbmr:green:usb";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               pci-in {
-                       lantiq,groups = "req1";
-                       lantiq,output = <0>;
-                       lantiq,open-drain = <1>;
-                       lantiq,pull = <2>;
-               };
-               pci-out {
-                       lantiq,groups = "gnt1";
-                       lantiq,output = <1>;
-                       lantiq,pull = <0>;
-               };
-               pci_rst {
-                       lantiq,pins = "io21";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&gsw {
-       phy-mode = "rgmii";
-       mtd-mac-address = <&boardconfig 0x10024>;
-};
-
-&pci0 {
-       status = "okay";
-};
-
-&localbus {
-       nor@0 {
-               compatible = "lantiq,nor";
-               bank-width = <2>;
-               reg = <0 0x0 0x2000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "uboot";
-                               reg = <0x00000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "uboot_env";
-                               reg = <0x40000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x60000 0x1f20000>;
-                       };
-
-                       boardconfig: partition@1fc0000 {
-                               label = "board";
-                               reg = <0x1fc0000 0x20000>;
-                               read-only;
-                       };
-
-                       partition@1fe0000 {
-                               label = "calibration";
-                               reg = <0x1fe0000 0x20000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/WBMR300.dts b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/WBMR300.dts
deleted file mode 100644 (file)
index 4092b6b..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/WBMR300.dts
+++ /dev/null
@@ -1,329 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-       compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
-       model = "Buffalo WBMR-300HPD";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200";
-       };
-
-       aliases {
-               led-boot = &power_g;
-               led-failsafe = &diag_r;
-               led-running = &power_g;
-
-               led-dsl = &dsl;
-               led-internet = &router_g;
-               led-wifi = &wifi_g;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       gpio_poweroff {
-               compatible = "gpio-poweroff";
-               gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               power {
-                       label = "power";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_POWER>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-
-               auto {
-                       label = "auto";
-                       gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
-                       linux,code = <BTN_0>;
-                       linux,input-type = <EV_SW>;
-               };
-
-               router {
-                       label = "router";
-                       gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
-                       linux,code = <BTN_1>;
-                       linux,input-type = <EV_SW>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               diag_r: diag_r {
-                       label = "wbmr300:red:diag";
-                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-                       default_state = "off";
-               };
-
-               wifi_g: wifi_g {
-                       label = "wbmr300:green:wifi";
-                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-               };
-
-               dsl: dsl {
-                       label = "dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
-               };
-
-               router_y: router_y {
-                       label = "wbmr300:yellow:router";
-                       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               wifi_y: wifi_y {
-                       label = "wbmr300:yellow:wifi";
-                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               lan1: lan1 {
-                       label = "wbmr300:green:lan1";
-                       gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-               };
-
-               wan: wan {
-                       label = "wbmr300:green:wan";
-                       gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
-               };
-
-               lan3: lan3 {
-                       label = "wbmr300:green:lan3";
-                       gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
-               };
-
-               lan2: lan2 {
-                       label = "wbmr300:green:lan2";
-                       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               };
-
-               internet_g: internet_g {
-                       label = "wbmr300:green:internet";
-                       gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
-               };
-
-               internet_y: internet_y {
-                       label = "wbmr300:yellow:internet";
-                       gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-               };
-
-               router_g: router_g {
-                       label = "wbmr300:green:router";
-                       gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-               };
-
-               power_g: power_g {
-                       label = "wbmr300:green:power";
-                       gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               lantiq,switch;
-
-               ethernet@1 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy13>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy14>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@4 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <3>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy12>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy12: ethernet-phy@12 {
-                       reg = <0x12>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-               phy14: ethernet-phy@14 {
-                       reg = <0x14>;
-                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               phy-rst {
-                       lantiq,pins = "io42";
-                       lantiq,pull = <0>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               pcie-rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-       pins_spi_default: pins_spi_default {
-               spi_in {
-                       lantiq,groups = "spi_di";
-                       lantiq,function = "spi";
-               };
-               spi_out {
-                       lantiq,groups = "spi_do", "spi_clk",
-                               "spi_cs4";
-                       lantiq,function = "spi";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&spi {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pins_spi_default>;
-
-       m25p80@4 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <4 0>;
-               spi-max-frequency = <20000000>;
-
-               partition@0 {
-                       reg = <0x0 0x10000>;
-                       label = "u-boot";
-                       read-only;
-               };
-
-               partition@10000 {
-                       reg = <0x10000 0x10000>;
-                       label = "gphyfirmware";
-                       read-only;
-               };
-
-               partition@20000 {
-                       reg = <0x20000 0x80000>;
-                       label = "dsl_fw";
-               };
-
-               partition@de0000 {
-                       reg = <0xa0000 0xf40000>;
-                       label = "firmware";
-               };
-
-               partition@fe0000 {
-                       reg = <0xfe0000 0x10000>;
-                       label = "sysconfig";
-                       read-only;
-               };
-
-               partition@ff0000 {
-                       reg = <0xff0000 0x2000>;
-                       label = "ubootconfig";
-               };
-
-               partition@ff3000 {
-                       reg = <0xff3000 0x2000>;
-                       label = "board_config";
-                       read-only;
-               };
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb_phy1 {
-       status = "okay";
-       phy-supply = <&usb_vbus>;
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/amazonse.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/amazonse.dtsi
deleted file mode 100644 (file)
index f216adf..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/amazonse.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "lantiq,xway", "lantiq,ase";
-
-       aliases {
-               serial0 = &asc1;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       cpus {
-               cpu@0 {
-                       compatible = "mips,mips4Kc";
-               };
-       };
-
-       memory@0 {
-               device_type = "memory";
-       };
-
-       biu@1f800000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,biu", "simple-bus";
-               reg = <0x1f800000 0x800000>;
-               ranges = <0x0 0x1f800000 0x7fffff>;
-
-               icu0: icu@80200 {
-                       #interrupt-cells = <1>;
-                       interrupt-controller;
-                       compatible = "lantiq,icu";
-                       reg = <0x80200 0x28
-                               0x80228 0x28
-                               0x80250 0x28
-                               0x80278 0x28
-                               0x802a0 0x28>;
-               };
-
-               watchdog@803f0 {
-                       compatible = "lantiq,wdt";
-                       reg = <0x803f0 0x10>;
-               };
-       };
-
-       sram@1f000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,sram", "simple-bus";
-               reg = <0x1f000000 0x800000>;
-               ranges = <0x0 0x1f000000 0x7fffff>;
-
-               eiu0: eiu@101000 {
-                       #interrupt-cells = <1>;
-                       interrupt-controller;
-                       compatible = "lantiq,eiu-xway";
-                       reg = <0x101000 0x1000>;
-                       interrupt-parent = <&icu0>;
-                       lantiq,eiu-irqs = <29 30 31>;
-               };
-
-               pmu0: pmu@102000 {
-                       compatible = "lantiq,pmu-xway";
-                       reg = <0x102000 0x1000>;
-               };
-
-               cgu0: cgu@103000 {
-                       compatible = "lantiq,cgu-xway";
-                       reg = <0x103000 0x1000>;
-                       #clock-cells = <1>;
-               };
-
-               rcu0: rcu@203000 {
-                       compatible = "lantiq,ase-rcu", "simple-mfd", "syscon";
-                       reg = <0x203000 0x1000>;
-                       ranges = <0x0 0x203000 0x100>;
-                       big-endian;
-
-                       reset: reset-controller@10 {
-                               compatible = "lantiq,danube-reset";
-                               reg = <0x10 4>, <0x14 4>;
-
-                               #reset-cells = <2>;
-                       };
-
-                       usb_phy: usb2-phy@18 {
-                               compatible = "lantiq,ase-usb2-phy";
-                               reg = <0x18 4>;
-                               status = "disabled";
-
-                               resets = <&reset 4 4>;
-                               reset-names = "ctrl";
-                               #phy-cells = <0>;
-                       };
-
-                       reboot@10 {
-                               compatible = "syscon-reboot";
-                               reg = <0x10 4>;
-
-                               regmap = <&rcu0>;
-                               offset = <0x10>;
-                               mask = <0x40000000>;
-                       };
-               };
-       };
-
-       fpi@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,fpi", "simple-bus";
-               ranges = <0x0 0x10000000 0xeefffff>;
-               reg = <0x10000000 0xef00000>;
-
-               localbus: localbus@0 {
-                       #address-cells = <2>;
-                       #size-cells = <1>;
-                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-                               1 0 0x4000000 0x4000010>; /* addsel1 */
-                       compatible = "lantiq,localbus", "simple-bus";
-               };
-
-               spi: spi@e100800 {
-                       compatible = "lantiq,ase-spi";
-                       reg = <0xe100800 0x100>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <24 25 26>;
-                       interrupt-names = "spi_rx", "spi_tx", "spi_err",
-                                       "spi_frm";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       status = "disabled";
-               };
-
-               gptu@e100a00 {
-                       compatible = "lantiq,gptu-xway";
-                       reg = <0xe100a00 0x100>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <33 34 35 36 37 38>;
-               };
-
-               gpio: pinmux@e100b10 {
-                       compatible = "lantiq,ase-pinctrl";
-                       #gpio-cells = <2>;
-                       gpio-controller;
-                       reg = <0xe100b10 0xa0>;
-               };
-
-               asc1: serial@e100c00 {
-                       compatible = "lantiq,asc";
-                       reg = <0xe100c00 0x400>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <72 74 75>;
-               };
-
-               mei@e116000 {
-                       compatible = "lantiq,mei-xway";
-                       interrupt-parent = <&icu0>;
-                       interrupts = <81>;
-               };
-
-               usb: usb@e101000 {
-                       compatible = "lantiq,ase-usb";
-                       reg = <0xe101000 0x1000
-                               0xe120000 0x3f000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <39>;
-                       dr_mode = "host";
-                       phys = <&usb_phy>;
-                       phy-names = "usb2-phy";
-                       status = "disabled";
-               };
-
-               dma0: dma@e104100 {
-                       compatible = "lantiq,dma-xway";
-                       reg = <0xe104100 0x800>;
-               };
-
-               ebu0: ebu@e105300 {
-                       compatible = "lantiq,ebu-xway";
-                       reg = <0xe105300 0x100>;
-               };
-
-               ppe@e234000 {
-                       compatible = "lantiq,ppe-ase";
-                       interrupt-parent = <&icu0>;
-                       interrupts = <85>;
-               };
-
-               gsw: etop@e180000 {
-                       compatible = "lantiq,etop-xway";
-                       reg = <0xe180000 0x40000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <105 109>;
-               };
-       };
-
-       adsl {
-               compatible = "lantiq,adsl-ase";
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ar9.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ar9.dtsi
deleted file mode 100644 (file)
index 48e0d95..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/ar9.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "lantiq,xway", "lantiq,ar9";
-
-       aliases {
-               serial0 = &asc1;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       cpus {
-               cpu@0 {
-                       compatible = "mips,mips34K";
-               };
-       };
-
-       memory@0 {
-               device_type = "memory";
-       };
-
-       biu@1f800000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,biu", "simple-bus";
-               reg = <0x1f800000 0x800000>;
-               ranges = <0x0 0x1f800000 0x7fffff>;
-
-               icu0: icu@80200 {
-                       #interrupt-cells = <1>;
-                       interrupt-controller;
-                       compatible = "lantiq,icu";
-                       reg = <0x80200 0x28
-                               0x80228 0x28
-                               0x80250 0x28
-                               0x80278 0x28
-                               0x802a0 0x28>;
-               };
-
-               watchdog@803f0 {
-                       compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
-                       reg = <0x803f0 0x10>;
-
-                       regmap = <&rcu0>;
-               };
-       };
-
-       sram@1f000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,sram", "simple-bus";
-               reg = <0x1f000000 0x800000>;
-               ranges = <0x0 0x1f000000 0x7fffff>;
-
-               eiu0: eiu@101000 {
-                       #interrupt-cells = <1>;
-                       interrupt-controller;
-                       compatible = "lantiq,eiu-xway";
-                       reg = <0x101000 0x1000>;
-                       interrupt-parent = <&icu0>;
-                       lantiq,eiu-irqs = <166 135 66 40 41 42>;
-               };
-
-               pmu0: pmu@102000 {
-                       compatible = "lantiq,pmu-xway";
-                       reg = <0x102000 0x1000>;
-               };
-
-               cgu0: cgu@103000 {
-                       compatible = "lantiq,cgu-xway";
-                       reg = <0x103000 0x1000>;
-                       #clock-cells = <1>;
-               };
-
-               rcu0: rcu@203000 {
-                       compatible = "lantiq,xrx100-rcu", "simple-mfd", "syscon";
-                       reg = <0x203000 0x1000>;
-                       ranges = <0x0 0x203000 0x100>;
-                       big-endian;
-
-                       reset: reset-controller@10 {
-                               compatible = "lantiq,xrx100-reset", "lantiq,danube-reset";
-                               reg = <0x10 4>, <0x14 4>;
-
-                               #reset-cells = <2>;
-                       };
-
-                       usb_phy0: usb2-phy@18 {
-                               compatible = "lantiq,xrx100-usb2-phy";
-                               reg = <0x18 4>;
-                               status = "disabled";
-
-                               resets = <&reset 4 4>;
-                               reset-names = "ctrl";
-                               #phy-cells = <0>;
-                       };
-
-                       usb_phy1: usb2-phy@34 {
-                               compatible = "lantiq,xrx100-usb2-phy";
-                               reg = <0x34 4>;
-                               status = "disabled";
-
-                               resets = <&reset 28 28>;
-                               reset-names = "ctrl";
-                               #phy-cells = <0>;
-                       };
-
-                       reboot@10 {
-                               compatible = "syscon-reboot";
-                               reg = <0x10 4>;
-
-                               regmap = <&rcu0>;
-                               offset = <0x10>;
-                               mask = <0x40000000>;
-                       };
-               };
-       };
-
-       fpi@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,fpi", "simple-bus";
-               ranges = <0x0 0x10000000 0xeefffff>;
-               reg = <0x10000000 0xef00000>;
-
-               localbus: localbus@0 {
-                       #address-cells = <2>;
-                       #size-cells = <1>;
-                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-                               1 0 0x4000000 0x4000010>; /* addsel1 */
-                       compatible = "lantiq,localbus", "simple-bus";
-               };
-
-               gptu@e100a00 {
-                       compatible = "lantiq,gptu-xway";
-                       reg = <0xe100a00 0x100>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <126 127 128 129 130 131>;
-               };
-
-               asc0: serial@e100400 {
-                       compatible = "lantiq,asc";
-                       reg = <0xe100400 0x400>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <104 105 106>;
-                       status = "disabled";
-               };
-
-               spi: spi@e100800 {
-                       compatible = "lantiq,xrx100-spi";
-                       reg = <0xe100800 0x100>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <22 23 24>;
-                       interrupt-names = "spi_rx", "spi_tx", "spi_err",
-                                       "spi_frm";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       status = "disabled";
-               };
-
-               gpio: pinmux@e100b10 {
-                       compatible = "lantiq,xrx100-pinctrl";
-                       #gpio-cells = <2>;
-                       gpio-controller;
-                       reg = <0xe100b10 0xa0>;
-               };
-
-               stp: stp@e100bb0 {
-                       #gpio-cells = <2>;
-                       compatible = "lantiq,gpio-stp-xway";
-                       gpio-controller;
-                       reg = <0xe100bb0 0x40>;
-                       status = "disabled";
-               };
-
-               asc1: serial@e100c00 {
-                       compatible = "lantiq,asc";
-                       reg = <0xe100c00 0x400>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <112 113 114>;
-               };
-
-               usb0: usb@e101000 {
-                       compatible = "lantiq,arx100-usb";
-                       reg = <0xe101000 0x1000
-                               0xe120000 0x3f000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <62 91>;
-                       dr_mode = "host";
-                       phys = <&usb_phy0>;
-                       phy-names = "usb2-phy";
-                       status = "disabled";
-               };
-
-               usb1: usb@e106000 {
-                       compatible = "lantiq,arx100-usb";
-                       reg = <0xe106000 0x1000
-                               0xe1e0000 0x3f000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <91>;
-                       dr_mode = "host";
-                       phys = <&usb_phy1>;
-                       phy-names = "usb2-phy";
-                       status = "disabled";
-               };
-
-               deu@e103100 {
-                       compatible = "lantiq,deu-arx100";
-                       reg = <0xe103100 0xf00>;
-               };
-
-               dma0: dma@e104100 {
-                       compatible = "lantiq,dma-xway";
-                       reg = <0xe104100 0x800>;
-               };
-
-               ebu0: ebu@e105300 {
-                       compatible = "lantiq,ebu-xway";
-                       reg = <0xe105300 0x100>;
-               };
-
-               mei@e116000 {
-                       compatible = "lantiq,mei-xway";
-                       interrupt-parent = <&icu0>;
-                       interrupts = <63>;
-               };
-
-               gsw: etop@e180000 {
-                       compatible = "lantiq,etop-xway";
-                       reg = <0xe180000 0x40000
-                               0xe108000 0x200>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-                       mac-address = [ 00 11 22 33 44 55 ];
-               };
-
-               ppe@e234000 {
-                       compatible = "lantiq,ppe-arx100";
-                       interrupt-parent = <&icu0>;
-                       interrupts = <96>;
-               };
-
-               pci0: pci@e105400 {
-                       status = "disabled";
-                       #address-cells = <3>;
-                       #size-cells = <2>;
-                       #interrupt-cells = <1>;
-                       compatible = "lantiq,pci-xway";
-                       bus-range = <0x0 0x0>;
-                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
-                                 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
-                       reg = <0x7000000 0x8000         /* config space */
-                               0xe105400 0x400>;       /* pci bridge */
-                       lantiq,bus-clock = <33333333>;
-                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-                       interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
-                       req-mask = <0x1>;
-               };
-       };
-
-       adsl {
-               compatible = "lantiq,adsl-arx100";
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/danube.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/danube.dtsi
deleted file mode 100644 (file)
index af4c795..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/danube.dtsi
+++ /dev/null
@@ -1,252 +0,0 @@
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "lantiq,xway", "lantiq,danube";
-
-       aliases {
-               serial0 = &asc1;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       cpus {
-               cpu@0 {
-                       compatible = "mips,mips24Kc";
-               };
-       };
-
-       memory@0 {
-               device_type = "memory";
-       };
-
-       biu@1f800000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,biu", "simple-bus";
-               reg = <0x1f800000 0x800000>;
-               ranges = <0x0 0x1f800000 0x7fffff>;
-
-               icu0: icu@80200 {
-                       #interrupt-cells = <1>;
-                       interrupt-controller;
-                       compatible = "lantiq,icu";
-                       reg = <0x80200 0x28
-                               0x80228 0x28
-                               0x80250 0x28
-                               0x80278 0x28
-                               0x802a0 0x28>;
-               };
-
-               watchdog@803f0 {
-                       compatible = "lantiq,wdt";
-                       reg = <0x803f0 0x10>;
-               };
-       };
-
-       sram@1f000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,sram", "simple-bus";
-               reg = <0x1f000000 0x800000>;
-               ranges = <0x0 0x1f000000 0x7fffff>;
-
-               eiu0: eiu@101000 {
-                       #interrupt-cells = <1>;
-                       interrupt-controller;
-                       compatible = "lantiq,eiu-xway";
-                       reg = <0x101000 0x1000>;
-                       interrupt-parent = <&icu0>;
-                       lantiq,eiu-irqs = <166 135 66>;
-               };
-
-               pmu0: pmu@102000 {
-                       compatible = "lantiq,pmu-xway";
-                       reg = <0x102000 0x1000>;
-               };
-
-               cgu0: cgu@103000 {
-                       compatible = "lantiq,cgu-xway";
-                       reg = <0x103000 0x1000>;
-                       #clock-cells = <1>;
-               };
-
-               vmmc: vmmc@107000 {
-                       status = "disabled";
-                       compatible = "lantiq,vmmc-xway";
-                       reg = <0x103000 0x400>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <150 151 152 153 154 155>;
-               };
-
-               rcu0: rcu@203000 {
-                       compatible = "lantiq,danube-rcu", "simple-mfd", "syscon";
-                       reg = <0x203000 0x1000>;
-                       ranges = <0x0 0x203000 0x100>;
-                       big-endian;
-
-                       reset: reset-controller@10 {
-                               compatible = "lantiq,danube-reset";
-                               reg = <0x10 4>, <0x14 4>;
-
-                               #reset-cells = <2>;
-                       };
-
-                       usb_phy: usb2-phy@18 {
-                               compatible = "lantiq,danube-usb2-phy";
-                               reg = <0x18 4>;
-                               status = "disabled";
-
-                               resets = <&reset 4 4>;
-                               reset-names = "ctrl";
-                               #phy-cells = <0>;
-                       };
-
-                       reboot@10 {
-                               compatible = "syscon-reboot";
-                               reg = <0x10 4>;
-
-                               regmap = <&rcu0>;
-                               offset = <0x10>;
-                               mask = <0x40000000>;
-                       };
-               };
-       };
-
-       fpi@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,fpi", "simple-bus";
-               ranges = <0x0 0x10000000 0xeefffff>;
-               reg = <0x10000000 0xef00000>;
-
-               localbus: localbus@0 {
-                       #address-cells = <2>;
-                       #size-cells = <1>;
-                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-                               1 0 0x4000000 0x4000010>; /* addsel1 */
-                       compatible = "lantiq,localbus", "simple-bus";
-
-                       gpiomm: gpiomm@1 {
-                               compatible = "lantiq,gpio-mm";
-                               reg = <1 0x0 0x10 >;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               #gpio-cells = <2>;
-                               gpio-controller;
-                               status = "disabled";
-                       };
-               };
-
-               gptu@e100a00 {
-                       compatible = "lantiq,gptu-xway";
-                       reg = <0xe100a00 0x100>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <126 127 128 129 130 131>;
-               };
-
-               gpios: stp@e100bb0 {
-                       #gpio-cells = <2>;
-                       compatible = "lantiq,gpio-stp-xway";
-                       gpio-controller;
-                       reg = <0xe100bb0 0x40>;
-                       lantiq,shadow = <0xfff>;
-                       lantiq,groups = <0x3>;
-                       status = "disabled";
-               };
-
-               asc0: serial@e100400 {
-                       compatible = "lantiq,asc";
-                       reg = <0xe100400 0x400>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <104 105 106>;
-                       status = "disabled";
-               };
-
-               gpio: pinmux@e100b10 {
-                       compatible = "lantiq,danube-pinctrl";
-                       #gpio-cells = <2>;
-                       gpio-controller;
-                       reg = <0xe100b10 0xa0>;
-               };
-
-               asc1: serial@e100c00 {
-                       compatible = "lantiq,asc";
-                       reg = <0xe100c00 0x400>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <112 113 114>;
-               };
-
-               usb: usb@e101000 {
-                       compatible = "lantiq,danube-usb";
-                       reg = <0xe101000 0x1000
-                               0xe120000 0x3f000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <62>;
-                       dr_mode = "host";
-                       phys = <&usb_phy>;
-                       phy-names = "usb2-phy";
-                       status = "disabled";
-               };
-
-               deu@e103100 {
-                       compatible = "lantiq,deu-danube";
-                       reg = <0xe103100 0xf00>;
-               };
-
-               dma0: dma@e104100 {
-                       compatible = "lantiq,dma-xway";
-                       reg = <0xe104100 0x800>;
-               };
-
-               ebu0: ebu@e105300 {
-                       compatible = "lantiq,ebu-xway";
-                       reg = <0xe105300 0x100>;
-               };
-
-               mei@e116000 {
-                       compatible = "lantiq,mei-xway";
-                       interrupt-parent = <&icu0>;
-                       interrupts = <63>;
-               };
-
-               gsw: etop@e180000 {
-                       compatible = "lantiq,etop-xway";
-                       reg = <0xe180000 0x40000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 78>;
-                       mac-address = [ 00 11 22 33 44 55 ];
-               };
-
-               ppe@e234000 {
-                       compatible = "lantiq,ppe-danube";
-                       interrupt-parent = <&icu0>;
-                       interrupts = <96>;
-               };
-
-               pci0: pci@e105400 {
-                       status = "disabled";
-
-                       #address-cells = <3>;
-                       #size-cells = <2>;
-                       #interrupt-cells = <1>;
-                       compatible = "lantiq,pci-xway";
-                       bus-range = <0x0 0x0>;
-                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
-                                 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
-                       reg = <0x7000000 0x8000         /* config space */
-                               0xe105400 0x400>;       /* pci bridge */
-                       lantiq,bus-clock = <33333333>;
-                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-                       interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
-                       req-mask = <0x1>; /* GNT1 */
-               };
-       };
-
-       adsl {
-               compatible = "lantiq,adsl-danube";
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/falcon-sflash-16M.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/falcon-sflash-16M.dtsi
deleted file mode 100644 (file)
index d95acc2..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/falcon-sflash-16M.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-
-&ebu_cs0 {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "lantiq,sflash-falcon", "simple-bus";
-
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "spansion,s25fl129p0", "spansion,s25fl129p1";
-               reg = <0 0>;
-               linux,mtd-name = "sflash";
-               spi-max-frequency = <80000000>;
-               m25p,fast-read;
-
-               partition@0 {
-                       reg = <0x0 0x40000>;
-                       label = "uboot";
-                       read-only;
-               };
-
-               partition@40000 {
-                       reg = <0x40000 0x80000>;
-                       label = "uboot_env";
-               };
-
-               partition@C0000 {
-                       reg = <0xC0000 0x740000>;
-                       label = "image0";
-               };
-
-               partition@800000 {
-                       reg = <0x800000 0x800000>;
-                       label = "image1";
-               };
-       };
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/falcon.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/falcon.dtsi
deleted file mode 100644 (file)
index 98f7181..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/falcon.dtsi
+++ /dev/null
@@ -1,392 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "lantiq,falcon";
-
-       cpus {
-               cpu@0 {
-                       compatible = "mips,mips34kc";
-               };
-       };
-
-       aliases {
-               serial0 = &serial0;
-               serial1 = &serial1;
-               gpio0 = &gpio0;
-               gpio1 = &gpio1;
-               gpio2 = &gpio2;
-               gpio3 = &gpio3;
-               gpio4 = &gpio4;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       clocks {
-               compatible = "simple-bus";
-
-               cpu_clk: cpu {
-                       compatible = "fixed-clock";
-                       #clock-cells = <0>;
-                       clock-frequency = <400000000>;
-                       clock-output-names = "cpu";
-               };
-
-               io_clk: io {
-                       compatible = "fixed-clock";
-                       #clock-cells = <0>;
-                       clock-frequency = <200000000>;
-                       clock-output-names = "io";
-               };
-
-               fpi_clk: fpi {
-                       compatible = "fixed-clock";
-                       #clock-cells = <0>;
-                       clock-frequency = <100000000>;
-                       clock-output-names = "fpi";
-               };
-       };
-
-       ebu_cs0: localbus@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,localbus", "simple-bus";
-               reg = <0x10000000 0x4000000>;
-               ranges = <0x0 0x10000000 0x4000000>;
-       };
-       ebu_cs1: localbus@14000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,localbus", "simple-bus";
-               reg = <0x14000000 0x4000000>;
-               ranges = <0x0 0x14000000 0x4000000>;
-       };
-
-       ebu@18000000 {
-               compatible = "lantiq,ebu-falcon";
-               reg = <0x18000000 0x100>;
-       };
-
-       sbs2@1D000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,sysb2", "simple-bus";
-               reg = <0x1D000000 0x1000000>;
-               ranges = <0x0 0x1D000000 0x1000000>;
-
-               clock_sysgpe: clock-controller@700000 {
-                       compatible = "lantiq,sysgpe-falcon";
-                       reg = <0x700000 0x100>;
-                       #clock-cells = <1>;
-               };
-
-               mps@4000 {
-                       compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100";
-                       reg = <0x4000 0x1000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <154 155>;
-                       lantiq,mbx = <&mpsmbx>;
-               };
-
-               gpio0: gpio@810000 {
-                       compatible = "lantiq,falcon-gpio";
-                       gpio-controller;
-                       #gpio-cells = <2>;
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <44>;
-                       reg = <0x810000 0x80>;
-                       clocks = <&clock_syseth 16>;
-               };
-
-               gpio2: gpio@810100 {
-                       compatible = "lantiq,falcon-gpio";
-                       gpio-controller;
-                       #gpio-cells = <2>;
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <46>;
-                       reg = <0x810100 0x80>;
-                       clocks = <&clock_syseth 17>;
-               };
-
-               clock_syseth: clock-controller@B00000 {
-                       compatible = "lantiq,syseth-falcon";
-                       reg = <0xB00000 0x100>;
-                       #clock-cells = <1>;
-               };
-
-               pad@B01000 {
-                       compatible = "lantiq,pad-falcon";
-                       reg = <0xB01000 0x100>;
-                       lantiq,bank = <0>;
-                       clocks = <&clock_syseth 20>;
-               };
-
-               pad@B02000 {
-                       compatible = "lantiq,pad-falcon";
-                       reg = <0xB02000 0x100>;
-                       lantiq,bank = <2>;
-                       clocks = <&clock_syseth 21>;
-               };
-       };
-
-       fpi@1E000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,fpi", "simple-bus";
-               reg = <0x1E000000 0x1000000>;
-               ranges = <0x0 0x1E000000 0x1000000>;
-
-               serial1: serial@100B00 {
-                       status = "disabled";
-                       compatible = "lantiq,asc";
-                       reg = <0x100B00 0x100>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <112 113 114>;
-                       line = <1>;
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&asc1_pins>;
-                       clocks = <&clock_sys1 11>;
-               };
-
-               serial0: serial@100C00 {
-                       compatible = "lantiq,asc";
-                       reg = <0x100C00 0x100>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <104 105 106>;
-                       line = <0>;
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&asc0_pins>;
-                       clocks = <&clock_sys1 12>;
-               };
-
-               spi: spi@100D00 {
-                       status = "disabled";
-                       compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc";
-                       interrupts = <22 23 24 25>;
-                       interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <0x100D00 0x100>;
-                       interrupt-parent = <&icu0>;
-                       clocks = <&clock_sys1 13>;
-                       base_cs = <1>;
-                       num_cs = <2>;
-               };
-
-               gptc@100E00 {
-                       compatible = "lantiq,gptc-falcon";
-                       reg = <0x100E00 0x100>;
-               };
-
-               i2c: i2c@200000 {
-                       status = "disabled";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,lantiq-i2c";
-                       reg = <0x200000 0x10000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <18 19 20 21>;
-                       gpios = <&gpio1 7 0 &gpio1 8 0>;
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c_pins>;
-                       clocks = <&clock_sys1 14>;
-               };
-
-               gpio1: gpio@800100 {
-                       compatible = "lantiq,falcon-gpio";
-                       gpio-controller;
-                       #gpio-cells = <2>;
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <45>;
-                       reg = <0x800100 0x100>;
-                       clocks = <&clock_sys1 16>;
-               };
-
-               gpio3: gpio@800200 {
-                       compatible = "lantiq,falcon-gpio";
-                       gpio-controller;
-                       #gpio-cells = <2>;
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <47>;
-                       reg = <0x800200 0x100>;
-                       clocks = <&clock_sys1 17>;
-               };
-
-               gpio4: gpio@800300 {
-                       compatible = "lantiq,falcon-gpio";
-                       gpio-controller;
-                       #gpio-cells = <2>;
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <48>;
-                       reg = <0x800300 0x100>;
-                       clocks = <&clock_sys1 18>;
-               };
-
-               pad@800400 {
-                       compatible = "lantiq,pad-falcon";
-                       reg = <0x800400 0x100>;
-                       lantiq,bank = <1>;
-                       clocks = <&clock_sys1 20>;
-               };
-
-               pad@800500 {
-                       compatible = "lantiq,pad-falcon";
-                       reg = <0x800500 0x100>;
-                       lantiq,bank = <3>;
-                       clocks = <&clock_sys1 21>;
-               };
-
-               pad@800600 {
-                       compatible = "lantiq,pad-falcon";
-                       reg = <0x800600 0x100>;
-                       lantiq,bank = <4>;
-                       clocks = <&clock_sys1 22>;
-               };
-
-               status@802000 {
-                       compatible = "lantiq,status-falcon";
-                       reg = <0x802000 0x80>;
-               };
-
-               clock_sys1: clock-controller@F00000 {
-                       compatible = "lantiq,sys1-falcon";
-                       reg = <0xF00000 0x100>;
-                       #clock-cells = <1>;
-               };
-       };
-
-       sbs0@1F000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "simple-bus";
-               reg = <0x1F000000 0x400000>;
-               ranges = <0x0 0x1F000000 0x400000>;
-
-               mpsmbx: mpsmbx@200000 {
-                       reg = <0x200000 0x200>;
-               };
-       };
-
-       sbs1@1F700000 {
-
-       };
-
-       biu@1F800000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,biu", "simple-bus";
-               reg = <0x1F800000 0x800000>;
-               ranges = <0x0 0x1F800000 0x800000>;
-
-               icu0: icu@80200 {
-                       #interrupt-cells = <1>;
-                       interrupt-controller;
-                       compatible = "lantiq,icu";
-                       reg = <0x80200 0x28
-                               0x80228 0x28
-                               0x80250 0x28
-                               0x80278 0x28
-                               0x802a0 0x28>;
-               };
-
-               watchdog@803F0 {
-                       compatible = "lantiq,wdt";
-                       reg = <0x803F0 0x10>;
-                       clocks = <&io_clk>; /* currently no effect */
-               };
-       };
-
-       pinctrl {
-               compatible = "lantiq,pinctrl-falcon";
-               pinctrl-names = "default";
-               pinctrl-0 = <&state_default>;
-
-               state_default: pinctrl0 {
-                       /*ntr {
-                               lantiq,groups = "ntr8k";
-                               lantiq,function = "ntr";
-                       };*/
-                       hrst {
-                               lantiq,groups = "hrst";
-                               lantiq,function = "rst";
-                       };
-               };
-
-               asc0_pins: asc0 {
-                       asc0 {
-                               lantiq,groups = "asc0";
-                               lantiq,function = "asc";
-                       };
-               };
-               asc1_pins: asc1 {
-                       asc1 {
-                               lantiq,groups = "asc1";
-                               lantiq,function = "asc";
-                       };
-               };
-               i2c_pins: i2c {
-                       i2c {
-                               lantiq,groups = "i2c";
-                               lantiq,function = "i2c";
-                       };
-               };
-               bootled_pins: bootled {
-                       bootled {
-                               lantiq,groups = "bootled";
-                               lantiq,function = "led";
-                       };
-               };
-               ntr_ntr8k: ntr8k {
-                       ntr8k {
-                               lantiq,groups = "ntr8k";
-                               lantiq,function = "ntr";
-                       };
-               };
-               ntr_pps: pps {
-                       pps {
-                               lantiq,groups = "pps";
-                               lantiq,function = "ntr";
-                       };
-               };
-               ntr_gpio: gpio {
-                       gpio {
-                               lantiq,pins = "io5";
-                               lantiq,mux = <1>;
-                               lantiq,output = <0>;
-                       };
-               };
-               slic_pins: slic {
-                       slic {
-                               lantiq,groups = "slic";
-                               lantiq,function = "slic";
-                       };
-               };
-       };
-
-       pinselect-ntr {
-               compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr";
-               pinctrl-names = "ntr8k", "pps", "gpio";
-               pinctrl-0 = <&ntr_ntr8k>;
-               pinctrl-1 = <&ntr_pps>;
-               pinctrl-2 = <&ntr_gpio>;
-       };
-
-       pinselect-asc1 {
-               compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1";
-               pinctrl-names = "default", "asc1";
-               pinctrl-0 = <&slic_pins>;
-               pinctrl-1 = <&asc1_pins>;
-       };
-
-};

diff --git a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/vr9.dtsi b/target/linux/lantiq/files-4.16/arch/mips/boot/dts/vr9.dtsi
deleted file mode 100644 (file)
index 036dbf0..0000000
--- a/target/linux/lantiq/files-4.16/arch/mips/boot/dts/vr9.dtsi
+++ /dev/null
@@ -1,349 +0,0 @@
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "lantiq,xway", "lantiq,vr9";
-
-       aliases {
-               serial0 = &asc1;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       cpus {
-               cpu@0 {
-                       compatible = "mips,mips34Kc";
-               };
-       };
-
-       memory@0 {
-               device_type = "memory";
-       };
-
-       cputemp@0 {
-               compatible = "lantiq,cputemp";
-       };
-
-       biu@1f800000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,biu", "simple-bus";
-               reg = <0x1f800000 0x800000>;
-               ranges = <0x0 0x1f800000 0x7fffff>;
-
-               icu0: icu@80200 {
-                       #interrupt-cells = <1>;
-                       interrupt-controller;
-                       compatible = "lantiq,icu";
-                       reg = <0x80200 0x28
-                               0x80228 0x28
-                               0x80250 0x28
-                               0x80278 0x28
-                               0x802a0 0x28>;
-               };
-
-               watchdog@803f0 {
-                       compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
-                       reg = <0x803f0 0x10>;
-
-                       regmap = <&rcu0>;
-               };
-       };
-
-       sram@1f000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,sram", "simple-bus";
-               reg = <0x1f000000 0x800000>;
-               ranges = <0x0 0x1f000000 0x7fffff>;
-
-               eiu0: eiu@101000 {
-                       #interrupt-cells = <1>;
-                       interrupt-controller;
-                       compatible = "lantiq,eiu-xway";
-                       reg = <0x101000 0x1000>;
-                       interrupt-parent = <&icu0>;
-                       lantiq,eiu-irqs = <166 135 66 40 41 42>;
-               };
-
-               pmu0: pmu@102000 {
-                       compatible = "lantiq,pmu-xway";
-                       reg = <0x102000 0x1000>;
-               };
-
-               cgu0: cgu@103000 {
-                       compatible = "lantiq,cgu-xway";
-                       reg = <0x103000 0x1000>;
-               };
-
-               dcdc@106a00 {
-                       compatible = "lantiq,dcdc-xrx200";
-                       reg = <0x106a00 0x200>;
-               };
-
-               vmmc: vmmc@103000 {
-                       status = "disabled";
-                       compatible = "lantiq,vmmc-xway";
-                       reg = <0x103000 0x400>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <150 151 152 153 154 155>;
-               };
-
-               rcu0: rcu@203000 {
-                       compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
-                       reg = <0x203000 0x100>;
-                       ranges = <0x0 0x203000 0x100>;
-                       big-endian;
-
-                       gphy0: gphy@20 {
-                               compatible = "lantiq,xrx200-gphy";
-                               reg = <0x20 0x4>;
-
-                               resets = <&reset0 31 30>, <&reset1 7 7>;
-                               reset-names = "gphy", "gphy2";
-                       };
-
-                       gphy1: gphy@68 {
-                               compatible = "lantiq,xrx200-gphy";
-                               reg = <0x68 0x4>;
-
-                               resets = <&reset0 29 28>, <&reset1 6 6>;
-                               reset-names = "gphy", "gphy2";
-                       };
-
-                       reset0: reset-controller@10 {
-                               compatible = "lantiq,xrx200-reset";
-                               reg = <0x10 4>, <0x14 4>;
-
-                               #reset-cells = <2>;
-                       };
-
-                       reset1: reset-controller@48 {
-                               compatible = "lantiq,xrx200-reset";
-                               reg = <0x48 4>, <0x24 4>;
-
-                               #reset-cells = <2>;
-                       };
-
-                       usb_phy0: usb2-phy@18 {
-                               compatible = "lantiq,xrx200-usb2-phy";
-                               reg = <0x18 4>, <0x38 4>;
-                               status = "disabled";
-
-                               resets = <&reset1 4 4>, <&reset0 4 4>;
-                               reset-names = "phy", "ctrl";
-                               #phy-cells = <0>;
-                       };
-
-                       usb_phy1: usb2-phy@34 {
-                               compatible = "lantiq,xrx200-usb2-phy";
-                               reg = <0x34 4>, <0x3c 4>;
-                               status = "disabled";
-
-                               resets = <&reset1 5 4>, <&reset0 4 4>;
-                               reset-names = "phy", "ctrl";
-                               #phy-cells = <0>;
-                       };
-
-                       reboot@10 {
-                               compatible = "syscon-reboot";
-                               reg = <0x10 4>;
-
-                               regmap = <&rcu0>;
-                               offset = <0x10>;
-                               mask = <0x40000000>;
-                       };
-               };
-       };
-
-       fpi@10000000 {
-               compatible = "lantiq,xrx200-fpi", "simple-bus";
-               ranges = <0x0 0x10000000 0xf000000>;
-               reg =   <0x1f400000 0x1000>,
-                       <0x10000000 0xf000000>;
-               regmap = <&rcu0>;
-               offset-endianness = <0x4c>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               localbus: localbus@0 {
-                       #address-cells = <2>;
-                       #size-cells = <1>;
-                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-                               1 0 0x4000000 0x4000010>; /* addsel1 */
-                       compatible = "lantiq,localbus", "simple-bus";
-               };
-
-               gptu@e100a00 {
-                       compatible = "lantiq,gptu-xway";
-                       reg = <0xe100a00 0x100>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <126 127 128 129 130 131>;
-               };
-
-               usif: usif@da00000 {
-                       compatible = "lantiq,usif";
-                       reg = <0xda00000 0x1000000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <29 125 107 108 109 110>;
-                       status = "disabled";
-               };
-
-               spi: spi@e100800 {
-                       compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
-                       reg = <0xe100800 0x100>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <22 23 24>;
-                       interrupt-names = "spi_rx", "spi_tx", "spi_err",
-                                       "spi_frm";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       status = "disabled";
-               };
-
-               gpio: pinmux@e100b10 {
-                       compatible = "lantiq,xrx200-pinctrl";
-                       #gpio-cells = <2>;
-                       gpio-controller;
-                       reg = <0xe100b10 0xa0>;
-               };
-
-               stp: stp@e100bb0 {
-                       status = "disabled";
-                       compatible = "lantiq,gpio-stp-xway";
-                       reg = <0xe100bb0 0x40>;
-                       #gpio-cells = <2>;
-                       gpio-controller;
-
-                       lantiq,shadow = <0xffffff>;
-                       lantiq,groups = <0x7>;
-                       lantiq,dsl = <0x0>;
-                       lantiq,phy1 = <0x0>;
-                       lantiq,phy2 = <0x0>;
-               };
-
-               asc1: serial@e100c00 {
-                       compatible = "lantiq,asc";
-                       reg = <0xe100c00 0x400>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <112 113 114>;
-               };
-
-               deu@e103100 {
-                       compatible = "lantiq,deu-xrx200";
-                       reg = <0xe103100 0xf00>;
-               };
-
-               dma0: dma@e104100 {
-                       compatible = "lantiq,dma-xway";
-                       reg = <0xe104100 0x800>;
-               };
-
-               ebu0: ebu@e105300 {
-                       compatible = "lantiq,ebu-xway";
-                       reg = <0xe105300 0x100>;
-               };
-
-               usb0: usb@e101000 {
-                       status = "disabled";
-                       compatible = "lantiq,xrx200-usb";
-                       reg = <0xe101000 0x1000
-                               0xe120000 0x3f000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <62 91>;
-                       dr_mode = "host";
-                       phys = <&usb_phy0>;
-                       phy-names = "usb2-phy";
-               };
-
-               usb1: usb@e106000 {
-                       status = "disabled";
-                       compatible = "lantiq,xrx200-usb";
-                       reg = <0xe106000 0x1000>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <91>;
-                       dr_mode = "host";
-                       phys = <&usb_phy1>;
-                       phy-names = "usb2-phy";
-               };
-
-               eth0: eth@E10B308 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <75 73 72>;
-                       resets = <&reset0 21 16>, <&reset0 8 8>, <&reset0 3 3>;
-                       reset-names = "switch", "ppe", "ppe_dsp";
-                       lantiq,phys = <&gphy0>, <&gphy1>;
-               };
-
-               gswip: gswip@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-gswip";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               >;
-                       resets = <&reset0 21 16>, <&reset0 8 8>, <&reset0 3 3>;
-                       reset-names = "switch", "ppe", "ppe_dsp";
-                       lantiq,phys = <&gphy0>, <&gphy1>;
-               };
-
-               mei@e116000 {
-                       compatible = "lantiq,mei-xrx200";
-                       reg = <0xe116000 0x9c>;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <63>;
-               };
-
-               ppe@e234000 {
-                       compatible = "lantiq,ppe-xrx200";
-                       interrupt-parent = <&icu0>;
-                       interrupts = <96>;
-               };
-
-               pcie0: pcie@d900000 {
-                       compatible = "lantiq,pcie-xrx200";
-
-                       #interrupt-cells = <1>;
-                       #size-cells = <2>;
-                       #address-cells = <3>;
-
-                       interrupt-parent = <&icu0>;
-                       interrupts = <161 144>;
-
-                       device_type = "pci";
-
-                       gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
-               };
-
-               pci0: pci@e105400 {
-                       status = "disabled";
-
-                       #address-cells = <3>;
-                       #size-cells = <2>;
-                       #interrupt-cells = <1>;
-                       compatible = "lantiq,pci-xway";
-                       bus-range = <0x0 0x0>;
-                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
-                               0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
-                       reg = <0x7000000 0x8000         /* config space */
-                               0xe105400 0x400>;       /* pci bridge */
-                       lantiq,bus-clock = <33333333>;
-                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-                       interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
-                       req-mask = <0x1>; /* GNT1 */
-               };
-       };
-
-       vdsl {
-               compatible = "lantiq,vdsl-vrx200";
-       };
-};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ACMP252.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ACMP252.dts
new file mode 100644 (file)
index 0000000..5e1f271
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ACMP252.dts
@@ -0,0 +1,114 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+/ {
+       compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
+       model = "AudioCodes MediaPack MP-252";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+               };
+               pci {
+                       lantiq,groups = "gnt1", "req1";
+                       lantiq,function = "pci";
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "rmii";
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x0 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "uboot_env";
+                               reg = <0x20000 0x20000>;
+                       };
+
+                       partition@40000 {
+                               label = "boardconfig";
+                               reg = <0x40000 0x60000>;
+                               read-only;
+                       };
+
+                       partition@a0000 {
+                               label = "firmware";
+                               reg = <0xa0000 0xf20000>;
+                       };
+
+                       partition@fc0000 {
+                               label = "sysconfig";
+                               reg = <0xfc0000 0x40000>;
+                       };
+
+                       partition@0x1000000 {
+                               label = "rootfs_data";
+                               reg = <0x1000000 0x1000000>;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ALL0333CJ.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ALL0333CJ.dts
new file mode 100644 (file)
index 0000000..0d128e0
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ALL0333CJ.dts
@@ -0,0 +1,116 @@
+/dts-v1/;
+
+#include "amazonse.dtsi"
+
+/ {
+       compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase";
+       model = "Allnet ALL0333CJ DSL Modem";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+
+               aliases {
+                       led-boot = &power;
+                       led-failsafe = &power;
+                       led-running = &power;
+
+                       led-dsl = &dsl;
+                       led-internet = &online_green;
+               };
+
+       };
+
+       memory@0 {
+               reg = <0x0 0x1000000>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               /* power led: red=off, green=on */
+               power: power {
+                       label = "all0333cj:green:power";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+
+               lan: lan {
+                       label = "all0333cj:green:lan";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+
+               dsl: dsl {
+                       label = "all0333cj:green:dsl";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+               };
+
+               online_green: online {
+                       label = "all0333cj:green:online";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+               online_red {
+                       label = "all0333cj:red:online";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               asc {
+                       lantiq,groups = "asc";
+                       lantiq,function = "asc";
+               };
+               keys_in {
+                       lantiq,pins = "io0",/* "io25", */"io29";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <1>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "mii";
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x400000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               label = "firmware";
+                               reg = <0x10000 0x3ef200>;
+                       };
+
+                       partition@3ff200 {
+                               label = "uboot_env";
+                               reg = <0x3ff200 0xc00>;
+                               read-only;
+                       };
+
+                       partition@3ffe00 {
+                               label = "dummy_bits";
+                               reg = <0x3ffe00 0x200>;
+                               read-only;
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4510PW.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4510PW.dts
new file mode 100644 (file)
index 0000000..0d0b70c
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4510PW.dts
@@ -0,0 +1,229 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube";
+       model = "Wippies, Elisa";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power2;
+               led-running = &power;
+
+               led-dsl = &adsl;
+               led-internet = &internet;
+               led-usb = &led_usb;
+               led-usb2 = &led_usb2;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power: power {
+                       label = "power";
+                       gpios = <&gpios 21 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               power2: power2 {
+                       label = "power2";
+                       gpios = <&gpios 20 GPIO_ACTIVE_HIGH>;
+               };
+               lan1 {
+                       label = "lan1";
+                       gpios = <&gpios 19 GPIO_ACTIVE_HIGH>;
+               };
+               lan2 {
+                       label = "lan2";
+                       gpios = <&gpios 18 GPIO_ACTIVE_HIGH>;
+               };
+               lan3 {
+                       label = "lan3";
+                       gpios = <&gpios 17 GPIO_ACTIVE_HIGH>;
+               };
+               lan4 {
+                       label = "lan4";
+                       gpios = <&gpios 16 GPIO_ACTIVE_HIGH>;
+               };
+               wifi: wifi {
+                       label = "wifi";
+                       gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
+               };
+               adsl: adsl {
+                       label = "adsl";
+                       gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
+               };
+               internet: internet {
+                       label = "internet";
+                       gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
+               };
+               internet2 {
+                       label = "internet2";
+                       gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
+               };
+               voip {
+                       label = "voip";
+                       gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
+               };
+               phone {
+                       label = "phone";
+                       gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
+               };
+               phone2 {
+                       label = "phone2";
+                       gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
+               };
+               led_usb: usb {
+                       label = "usb";
+                       gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
+               };
+               led_usb2: usb2 {
+                       label = "usb2";
+                       gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
+               };
+               usb3 {
+                       label = "usb3";
+                       gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
+               };
+               unlabeled {
+                       label = "unlabeled";
+                       gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               ebu {
+                       lantiq,groups = "ebu a23";
+                       lantiq,function = "ebu";
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               stp {
+                       lantiq,groups = "stp";
+                       lantiq,function = "stp";
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               exin {
+                       lantiq,groups = "exin1", "exin2";
+                       lantiq,function = "exin";
+                       lantiq,output = <0>;
+               };
+               pci_in {
+                       lantiq,groups = "req1", "req2";
+                       lantiq,function = "pci";
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1", "gnt2";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               buttons {
+                       lantiq,pins = "io3", "io14";
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+       };
+};
+
+&gpios {
+       status = "okay";
+       lantiq,groups = <0x7>;
+};
+
+&gsw {
+       phy-mode = "rmii";
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x1000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               lantiq,noxip;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "uboot_env";
+                               reg = <0x40000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "firmware";
+                               reg = <0x60000 0xfa0000>;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       lantiq,external-clock;
+       interrupt-map = <
+               0x6000 0 0 1 &icu0 135
+               0x7800 0 0 1 &icu0 66
+               0x7800 0 0 2 &icu0 66
+               0x7800 0 0 3 &icu0 66
+       >;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+       req-mask = <0x7>;
+};
+
+&vmmc {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4518PWR01.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4518PWR01.dts
new file mode 100644 (file)
index 0000000..34f868f
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4518PWR01.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "ARV4518PWR01.dtsi"
+
+/ {
+       compatible = "arcadyan,arv4518pwr01", "lantiq,xway", "lantiq,danube";
+       model = "SMC7908A-ISP";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4518PWR01.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4518PWR01.dtsi
new file mode 100644 (file)
index 0000000..458a387
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4518PWR01.dtsi
@@ -0,0 +1,205 @@
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+
+               led-dsl = &dsl;
+               led-internet = &online;
+               led-usb = &led_usb;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       ath5k_eep {
+               compatible = "ath5k,eeprom";
+               ath,eep-flash = <&boardconfig 0x400>;
+               ath,mac-offset = <0x16>;
+               ath,mac-increment = <1>;
+               ath,eep-swap;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power: power {
+                       label = "power";
+                       gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               dsl: dsl {
+                       label = "dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               online: online {
+                       label = "online";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "wifi";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+               };
+               dsl2 {
+                       label = "dsl2";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+               led_usb: usb {
+                       label = "usb";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+               voice {
+                       label = "voice";
+                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+               };
+               fxs1 {
+                       label = "fxs1";
+                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+               };
+               fxs2 {
+                       label = "fxs2";
+                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+               };
+               fxo {
+                       label = "fxo";
+                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               ebu {
+                       lantiq,groups = "ebu cs1";
+                       lantiq,function = "ebu";
+               };
+               pci_in {
+                       lantiq,groups = "req1", "req2";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1", "gnt2";
+                       lantiq,function = "pci";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&gpiomm {
+       status = "okay";
+       lantiq,shadow = <0x0>;
+};
+
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>; /* 64 KB */
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x10000 0x10000>; /* 64 KB */
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x3d0000>;
+                       };
+
+                       boardconfig: partition@400000 {
+                               label = "boardconfig";
+                               reg = <0x3f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+       req-mask = <0xf>;
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4518PWR01A.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4518PWR01A.dts
new file mode 100644 (file)
index 0000000..9617398
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4518PWR01A.dts
@@ -0,0 +1,12 @@
+/dts-v1/;
+
+#include "ARV4518PWR01.dtsi"
+
+/ {
+       compatible = "arcadyan,arv4518pwr01a", "lantiq,xway", "lantiq,danube";
+       model = "SMC7908A-ISP, Airties WAV-221";
+};
+
+&pci0 {
+       lantiq,external-clock;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4519PW.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4519PW.dts
new file mode 100644 (file)
index 0000000..5733d2c
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4519PW.dts
@@ -0,0 +1,202 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube";
+       model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+               led-internet = &internet_green;
+               led-usb = &led_usb;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_green: power {
+                       label = "arv4519pw:green:power";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_red: power2 {
+                       label = "arv4519pw:red:power";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "arv4519pw:green:wlan";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "arv4519pw:green:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               internet_green: online {
+                       label = "arv4519pw:green:internet";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               online2 {
+                       label = "arv4519pw:red:internet";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+               led_usb: usb {
+                       label = "arv4519pw:green:usb";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+               voip {
+                       label = "arv4519pw:green:voip";
+                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+               };
+               fxs1 {
+                       label = "arv4519pw:green:phone1";
+                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+               };
+               fxs2 {
+                       label = "arv4519pw:green:phone2";
+                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+               };
+               fxo {
+                       label = "arv4519pw:green:line";
+                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+               };
+               wps2 {
+                       label = "arv4519pw:green:wps";
+                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+               };
+               wps {
+                       label = "arv4519pw:orange:wps";
+                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+               };
+               wps3 {
+                       label = "arv4519pw:red:wps";
+                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               ebu {
+                       lantiq,groups = "ebu cs1";
+                       lantiq,function = "ebu";
+               };
+       };
+};
+
+&gpiomm {
+       status = "okay";
+       lantiq,shadow = <0x400>;
+};
+
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x10000 0x10000>;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x3d0000>;
+                       };
+
+                       boardconfig: partition@3f0000 {
+                               label = "boardconfig";
+                               reg = <0x3f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0  {
+       status = "okay";
+       lantiq,external-clock;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+       req-mask = <0xf>;
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4520PW.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4520PW.dts
new file mode 100644 (file)
index 0000000..aa42693
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4520PW.dts
@@ -0,0 +1,227 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube";
+       model = "Easybox 800, WAV-281";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_blue;
+               led-failsafe = &power_red;
+               led-running = &power_blue;
+
+               led-dsl = &dsl;
+               led-internet = &internet_blue;
+               led-usb = &led_usb;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "wps";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_blue: power {
+                       label = "arv4520pw:blue:power";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               dsl: dsl {
+                       label = "arv4520pw:blue:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               internet_blue: internet {
+                       label = "arv4520pw:blue:internet";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               power_red: power2 {
+                       label = "arv4520pw:red:power";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               wps {
+                       label = "arv4520pw:yellow:wps";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+               };
+               wps2 {
+                       label = "arv4520pw:red:wps";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+               };
+               /*
+                       wps green is missing
+               */
+               fxs1 {
+                       label = "arv4520pw:blue:telefon1";
+                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+               };
+               fxs2 {
+                       label = "arv4520pw:blue:telefon2";
+                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+               };
+               isdn {
+                       label = "arv4520pw:blue:isdn";
+                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+               };
+               fxo {
+                       label = "arv4520pw:blue:line";
+                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+               };
+               voice {
+                       label = "arv4520pw:blue:sprache";
+                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+               };
+               led_usb: usb {
+                       label = "arv4520pw:blue:usb";
+                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "arv4520pw:blue:wifi";
+                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+               };
+               internet2 {
+                       label = "arv4520pw:red:internet";
+                       gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+               };
+               /*
+                       info is missing
+               */
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               ebu {
+                       lantiq,groups = "ebu cs1";
+                       lantiq,function = "ebu";
+               };
+               pci_in {
+                       lantiq,groups = "req1";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+       };
+};
+
+&gpiomm {
+       status = "okay";
+       lantiq,shadow = <0x400>;
+};
+
+&gsw {
+       /* gpiomm 10 - switch */
+       phy-mode = "rmii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x800000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "uboot_env";
+                               reg = <0x20000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "firmware";
+                               reg = <0x30000 0x3c0000>;
+                       };
+
+                       boardconfig: partition@7f0000 {
+                               label = "boardconfig";
+                               reg = <0x3f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       lantiq,external-clock;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 31 GPIO_ACTIVE_HIGH
+               &gpiomm 7 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4525PW.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4525PW.dts
new file mode 100644 (file)
index 0000000..b3904d3
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV4525PW.dts
@@ -0,0 +1,162 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube";
+       model = "Speedport W501V Typ A";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               /* we dont have a power led, lets use the online led */
+               led-boot = &online;
+               led-failsafe = &online;
+
+               led-dsl = &dsl;
+               led-internet = &online;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       ath5k_eep {
+               compatible = "ath5k,eeprom";
+               ath,eep-flash = <&boardconfig 0x400>;
+               ath,mac-offset = <0x0>;
+               ath,eep-swap;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               fxo {
+                       label = "arv4525pw:green:festnetz";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               fxs {
+                       label = "arv4525pw:green:internet";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "arv4525pw:green:t-dsl";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "arv4525pw:green:wlan";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+               online: online {
+                       label = "arv4525pw:green:online";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               pci_in {
+                       lantiq,groups = "req1";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+               relay {
+                       lantiq,pins = "io31";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+/* #define ARV4525PW_PHYRESET  13 */
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x10000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x3d0000>;
+                       };
+
+                       boardconfig: partition@400000 {
+                               label = "boardconfig";
+                               reg = <0x3f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+/* #define ARV4525PW_RELAY             31 */
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV452CQW.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV452CQW.dts
new file mode 100644 (file)
index 0000000..1e1183d
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV452CQW.dts
@@ -0,0 +1,245 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
+       model = "Arcor 801";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_blue;
+               led-failsafe = &power_red;
+               led-running = &power_blue;
+
+               led-dsl = &dsl_blue;
+               led-usb = &led_usb;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       ath5k_eep {
+               compatible = "ath5k,eeprom";
+               ath,eep-flash = <&boardconfig 0x400>;
+               ath,mac-offset = <0x0>;
+               ath,eep-swap;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power_blue: power0 {
+                       label = "arv452cqw:blue:power";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               dsl_blue: dsl {
+                       label = "arv452cqw:blue:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               isdn {
+                       label = "arv452cqw:blue:isdn";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               power_red: power1 {
+                       label = "arv452cqw:red:power";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               wps {
+                       label = "arv452cqw:blue:wps";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+               };
+               wps1 {
+                       label = "arv452cqw:yellow:wps";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+               };
+               fxs1 {
+                       label = "arv452cqw:blue:telefon1";
+                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+               };
+               fxs2 {
+                       label = "arv452cqw:blue:telefon2";
+                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+               };
+               wps2 {
+                       label = "arv452cqw:red:wps";
+                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+               };
+               fxo {
+                       label = "arv452cqw:blue:line";
+                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+               };
+               voice {
+                       label = "arv452cqw:blue:sprache";
+                       gpios = <&gpiomm 4 1>;
+               };
+               led_usb: usb {
+                       label = "arv452cqw:blue:usb";
+                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "arv452cqw:blue:wlan";
+                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+               };
+               /*
+                       internet blue and internet red are missing
+                       dsl2 and dsl3 are not referenced in manual
+               */
+               dsl2 {
+                       label = "arv452cqw:yellow:dsl";
+                       gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
+               };
+               dsl3 {
+                       label = "arv452cqw:red:dsl";
+                       gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               ebu {
+                       lantiq,groups = "ebu cs1";
+                       lantiq,function = "ebu";
+               };
+               pci_in {
+                       lantiq,groups = "req1";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+               leds {
+                       lantiq,pins = "io3", "io5", "io6", "io7", "io9";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&gpiomm {
+       status = "okay";
+       lantiq,shadow = <0x77f>;
+};
+
+/*
+#define ARV452CPW_SWITCH_RESET          110
+*/
+&gsw {
+       phy-mode = "rmii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x400000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x10000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x3d0000>;
+                       };
+
+                       boardconfig: partition@3f0000 {
+                               label = "boardconfig";
+                               reg = <0x3f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       lantiq,external-clock;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 31 GPIO_ACTIVE_HIGH
+               &gpiomm 7 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7506PW11.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7506PW11.dts
new file mode 100644 (file)
index 0000000..0c251c6
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7506PW11.dts
@@ -0,0 +1,163 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
+       model = "Alice/O2 IAD 4421";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power_red;
+               led-running = &power;
+
+               led-dsl = &dsl;
+               led-internet = &internet;
+               led-wifi = &wlan;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wlan: wlan {
+                       label = "arv7506pw11:green:wlan";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+               };
+               power: power {
+                       label = "arv7506pw11:green:power";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               dsl: dsl {
+                       label = "arv7506pw11:green:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               internet: internet {
+                       label = "arv7506pw11:green:internet";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               power_red: power_red {
+                       label = "arv7506pw11:red:power";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               internet_red {
+                       label = "arv7506pw11:red:internet";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+               };
+               info {
+                       label = "arv7506pw11:green:info";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+               telefon {
+                       label = "arv7506pw11:green:telefon";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+               };
+               info_red {
+                       label = "arv7506pw11:red:info";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               pci {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+/* GPIO 19: switch reset */
+&gsw {
+       phy-mode = "rmii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x800000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "uboot_env";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x7a0000>;
+                       };
+
+                       boardconfig: partition@7f0000 {
+                               label = "board_config";
+                               reg = <0x7f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       lantiq,external-clock;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@1814,3592 {
+               compatible = "pci1814,3592";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+               mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7510PW22.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7510PW22.dts
new file mode 100644 (file)
index 0000000..337f969
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7510PW22.dts
@@ -0,0 +1,208 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
+       model = "Astoria Networks ARV7510PW22";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+
+               led-dsl = &internet;
+               led-usb = &umts;
+               led-wifi = &wlan;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               restart {
+                       label = "restart";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_POWER>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power: power {
+                       label = "power";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               internet: internet {
+                       label = "internet";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               wlan: wlan {
+                       label = "wlan";
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+               };
+               umts: 3g {
+                       label = "3g";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+               message {
+                       label = "message";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_in {
+                       lantiq,groups = "req1", "req2";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+               pins_out {
+                       lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
+                       lantiq,output = <1>;
+               };
+               pins_in {
+                       lantiq,pins = "io11", "io12", "io28";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gsw {
+       /* Switch reset 19 */
+       phy-mode = "mii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x1000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "uboot_env";
+                               reg = <0x40000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "firmware";
+                               reg = <0x60000 0xf80000>;
+                       };
+
+                       boardconfig: partition@fe0000 {
+                               label = "board_config";
+                               reg = <0xfe0000 0x20000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       lantiq,external-clock;
+       interrupt-map = <
+               0x7000 0 0 1 &icu0 30
+               0x7800 0 0 1 &icu0 135
+               0x7800 0 0 2 &icu0 135
+               0x7800 0 0 3 &icu0 135
+       >;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+       req-mask = <0x3>;
+
+       wifi@1814,3592 {
+               compatible = "pci1814,3592";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7518PW.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7518PW.dts
new file mode 100644 (file)
index 0000000..1d6f404
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7518PW.dts
@@ -0,0 +1,239 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
+       model = "Astoria Networks ARV7518PW";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+               led-internet = &online_green;
+               led-usb = &led_usb;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power_green: power {
+                       label = "arv7518pw:green:power";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               dsl: dsl {
+                       label = "arv7518pw:green:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               online_green: online {
+                       label = "arv7518pw:green:internet";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "arv7518pw:green:wlan";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               power_red: power2 {
+                       label = "arv7518pw:red:power";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+               };
+               online2 {
+                       label = "arv7518pw:red:internet";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+               led_usb: usb {
+                       label = "arv7518pw:green:usb";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+               voice {
+                       label = "arv7518pw:green:voip";
+                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+               };
+               fxs1 {
+                       label = "arv7518pw:green:phone1";
+                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+               };
+               fxs2 {
+                       label = "arv7518pw:green:phone2";
+                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+               };
+               unlabeled {
+                       label = "arv7518pw:amber:unlabeled";
+                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+               };
+               wps {
+                       label = "arv7518pw:amber:wps";
+                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+               };
+               wps2 {
+                       label = "arv7518pw:green:wps";
+                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+               };
+               wps3 {
+                       label = "arv7518pw:red:wps";
+                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               ebu {
+                       lantiq,groups = "ebu cs1";
+                       lantiq,function = "ebu";
+               };
+               pci_in {
+                       lantiq,groups = "req1";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+               leds {
+                       lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
+                       lantiq,output = <1>;
+               };
+               keys {
+                       lantiq,pins = "io28", "io30";
+                       lantiq,output = <0>;
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <1>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpiomm {
+       status = "okay";
+       lantiq,shadow = <0x0>;
+};
+
+/*
+#define SWITCH_RESET          13
+*/
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x10000 0x10000>;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x7d0000>;
+                       };
+
+                       boardconfig: partition@400000 {
+                               label = "boardconfig";
+                               reg = <0x7f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+       lantiq,external-clock;
+       req-mask = <0xf>;
+
+       wifi@168c,0029 {
+               compatible = "pci168c,0029";
+               reg = <0x7000 0 0 0 0>;
+               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+               mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7519PW.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7519PW.dts
new file mode 100644 (file)
index 0000000..39dcf45
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7519PW.dts
@@ -0,0 +1,228 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube";
+       model = "Astoria Networks ARV7519PW";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power2;
+               led-running = &power;
+
+               led-dsl = &dsl;
+               led-internet = &online;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power: power {
+                       label = "power";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power2: power2 {
+                       label = "power2";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+               online: online {
+                       label = "online";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+               online2 {
+                       label = "online2";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "wifi";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+               wifi2 {
+                       label = "wifi2";
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+               };
+               wifi3 {
+                       label = "wifi3";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               voice {
+                       label = "voice";
+                       gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+               wps2 {
+                       label = "wps2";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+               };
+               wps3 {
+                       label = "wps3";
+                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               lan {
+                       label = "lan";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+               };
+               tv {
+                       label = "tv";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+               };
+               upgrade {
+                       label = "upgrade";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       /* is there another way to "reserve" the GPIO? */
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               switch {
+                       gpio-export,name = "switch";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               ebu {
+                       lantiq,groups = "ebu cs1";
+                       lantiq,function = "ebu";
+               };
+               pci_in {
+                       lantiq,groups = "req1";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+               switch_rst {
+                       lantiq,pins = "io19";
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "uboot_env";
+                               reg = <0x40000 0x20000>;
+                       };
+
+                       partition@60000 {
+                               label = "firmware";
+                               reg = <0x60000 0xf80000>;
+                       };
+
+                       boardconfig: partition@fe0000 {
+                               label = "board_config";
+                               reg = <0xfe0000 0x20000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       lantiq,external-clock;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+       req-mask = <0xf>;
+
+       wifi@0,0 {
+               compatible = "pci0,0";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+/* warning: passive port only works with active devices */
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7519RW22.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7519RW22.dts
new file mode 100644 (file)
index 0000000..40607ae
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7519RW22.dts
@@ -0,0 +1,253 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
+       model = "Orange Livebox 2.1";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_green;
+               led-running = &power_green;
+
+               led-dsl = &internet_green;
+       };
+
+       memory@0 {
+               reg = <0x0 0x8000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               lan_green {
+                       label = "arv7519rw22:green:lan";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+               };
+               internet_red {
+                       label = "arv7519rw22:red:internet";
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+               };
+               power_green: power_green {
+                       label = "arv7519rw22:green:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               alarm_blue {
+                       label = "arv7519rw22:blue:alarm";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+               internet_orange {
+                       label = "arv7519rw22:orange:internet";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+               internet_green: internet_green {
+                       label = "arv7519rw22:green:internet";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+               };
+               voice_green {
+                       label = "arv7519rw22:green:voice";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&boardconfig 0x16>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy14>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <3>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy12>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy12: ethernet-phy@12 {
+                       reg = <0x12>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy14: ethernet-phy@14 {
+                       reg = <0x14>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               pcie-rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x0 0x60000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "uboot-env";
+                               reg = <0x60000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@80000 {
+                               label = "firmware";
+                               reg = <0x80000 0x1f00000>;
+                       };
+
+                       boardconfig: partition@1f80000 {
+                               label = "boardconfig";
+                               reg = <0x1f80000 0x80000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pcie0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb_phy1 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7525PW.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7525PW.dts
new file mode 100644 (file)
index 0000000..4252226
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV7525PW.dts
@@ -0,0 +1,151 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
+       model = "Speedport W303V Typ A";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &power_green;
+               led-internet = &online;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power_green: power {
+                       label = "arv7525pw:green:power";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_red: power1 {
+                       label = "arv7525pw:red:power";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               online: online {
+                       label = "arv7525pw:green:online";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               voice {
+                       label = "arv7525pw:green:telefonie";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               voice2 {
+                       label = "arv7525pw:red:telefonie";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "arv7525pw:green:wlan";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+               };
+               pci {
+                       lantiq,groups = "gnt1", "req1";
+                       lantiq,function = "pci";
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x10000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x3d0000>;
+                       };
+
+                       boardconfig: partition@400000 {
+                               label = "board_config";
+                               reg = <0x3f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
+
+       wifi@0,0 {
+               compatible = "pci0,0";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+       };
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV752DPW.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV752DPW.dts
new file mode 100644 (file)
index 0000000..7b337b4
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV752DPW.dts
@@ -0,0 +1,245 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
+       model = "Arcor 802";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_red;
+               led-failsafe = &power_blue;
+               led-running = &power_red;
+
+               led-dsl = &internet_red;
+               led-usb = &umts;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               restart {
+                       label = "restart";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_POWER>;
+               };
+               dsl {
+                       label = "dsl";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power_blue: power1 {
+                       label = "arv752dpw:blue:power";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+               internet_red: internet {
+                       label = "arv752dpw:red:internet";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               message {
+                       label = "arv752dpw:red:message";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               power_red: power {
+                       label = "arv752dpw:red:power";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               voice1 {
+                       label = "arv752dpw:red:voice";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+               umts: umts {
+                       label = "arv752dpw:red:umts";
+                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "arv752dpw:red:wifi";
+                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+               };
+               fxs1 {
+                       label = "arv752dpw:green:tae-n";
+                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+               };
+               fxs2 {
+                       label = "arv752dpw:green:tae-u";
+                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+               };
+               fxo {
+                       label = "arv752dpw:green:isdn";
+                       gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
+               };
+               internet2 {
+                       label = "arv752dpw:blue:internet";
+                       gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
+               };
+               voice2 {
+                       label = "arv752dpw:blue:voice";
+                       gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               ebu {
+                       lantiq,groups = "ebu cs1";
+                       lantiq,function = "ebu";
+               };
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_in {
+                       lantiq,groups = "req2", "req1";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+               leds {
+                       lantiq,pins = "io3", "io5", "io6", "io8";
+                       lantiq,output = <1>;
+                       lantiq,pull = <0>;
+               };
+               keys {
+                       lantiq,pins = "io11", "io12", "io13", "io28";
+                       lantiq,output = <0>;
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <1>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpiomm {
+       status = "okay";
+       lantiq,shadow = <0x3>;
+};
+
+&gsw {
+       phy-mode = "rmii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x800000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x10000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x7d0000>;
+                       };
+
+                       boardconfig: partition@7f0000 {
+                               label = "board_config";
+                               reg = <0x7f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       lantiq,external-clock;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+       interrupt-map = <0x7000 0 0 1 &icu0 135>;
+       req-mask = <0x3>;
+
+       wifi@1814,0601 {
+               compatible = "pci1814,0601";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV752DPW22.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV752DPW22.dts
new file mode 100644 (file)
index 0000000..feb92d4
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV752DPW22.dts
@@ -0,0 +1,267 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
+       model = "Arcor 803";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_red;
+               led-failsafe = &power_blue;
+               led-running = &power_red;
+
+               led-dsl = &internet_red;
+               led-usb = &umts;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               restart {
+                       label = "restart";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_POWER>;
+               };
+               dsl {
+                       label = "dsl";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power_blue: power1 {
+                       label = "arv752dpw22:blue:power";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+               internet_red: internet {
+                       label = "arv752dpw22:red:internet";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               message {
+                       label = "arv752dpw22:red:message";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               power_red: power {
+                       label = "arv752dpw22:red:power";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               voice1 {
+                       label = "arv752dpw22:red:voice";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+               umts: umts {
+                       label = "arv752dpw22:red:umts";
+                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "arv752dpw22:red:wifi";
+                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+               };
+               fxs1 {
+                       label = "arv752dpw22:green:tae-n";
+                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+               };
+               fxs2 {
+                       label = "arv752dpw22:green:tae-u";
+                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+               };
+               fxo {
+                       label = "arv752dpw22:green:isdn";
+                       gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
+               };
+               internet2 {
+                       label = "arv752dpw22:blue:internet";
+                       gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
+               };
+               voice2 {
+                       label = "arv752dpw22:blue:voice";
+                       gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+               };
+               eth1 {
+                        label = "arv752dpw22:green:lan1";
+                        gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
+               };
+               eth2 {
+                       label = "arv752dpw22:green:lan2";
+                       gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
+               };
+               eth3 {
+                       label = "arv752dpw22:green:lan3";
+                       gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
+               };
+               eth4 {
+                       label = "arv752dpw22:green:lan4";
+                       gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               ebu {
+                       lantiq,groups = "ebu cs1";
+                       lantiq,function = "ebu";
+               };
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_in {
+                       lantiq,groups = "req1";
+                       lantiq,function = "pci";
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,open-drain = <1>;
+                       lantiq,output = <1>;
+               };
+               leds {
+                       lantiq,pins = "io3", "io5", "io6", "io8";
+                       lantiq,open-drain = <1>;
+                       lantiq,output = <1>;
+               };
+               buttons {
+                       lantiq,pins = "io11", "io12", "io13", "io28";
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+       };
+};
+
+
+&gpiomm {
+       status = "okay";
+       lantiq,shadow = <3>;
+};
+
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x800000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x30000>;
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x40000 0x7b0000>;
+                       };
+
+                       boardconfig: partition@7f0000 {
+                               label = "board_config";
+                               reg = <0x7f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       lantiq,external-clock;
+       interrupt-map = <
+               0x7000 0 0 1 &icu0 30
+               0x7800 0 0 1 &icu0 135
+               0x7800 0 0 2 &icu0 135
+               0x7800 0 0 3 &icu0 135
+       >;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+       req-mask = <0x3>;
+
+       wifi@1814,3592 {
+               compatible = "pci1814,3592";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+               mtd-mac-address = <&boardconfig 0x16>;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV8539PW22.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV8539PW22.dts
new file mode 100644 (file)
index 0000000..1e39380
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ARV8539PW22.dts
@@ -0,0 +1,191 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube";
+       model = "Speedport W 504V Typ A";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl_green;
+               led-internet = &online_green;
+               led-wifi = &wireless_green;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+               /* key DECT is missing */
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_green: power-green {
+                       label = "arv8539pw22:green:power";
+                       gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_red: power-red {
+                       label = "arv8539pw22:red:power";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+
+               dsl_green: dsl-green {
+                       label = "arv8539pw22:green:dsl";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+
+               online_green: online-green {
+                       label = "arv8539pw22:green:online";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+
+               wireless_green: wireless-green {
+                       label = "arv8539pw22:green:wlan";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+               /*
+                       telefonie green is missing
+               */
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               pci_in {
+                       lantiq,groups = "req1";
+                       lantiq,function = "pci";
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <0>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+               relay {
+                       lantiq,pins = "io31";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&art 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x800000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x30000>;        /* 192 KiB */
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "uboot";
+                               reg = <0x30000 0x10000>;        /* 64 KiB */
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "firmware";
+                               reg = <0x40000 0x7B0000>;       /* 7872 KiB */
+                       };
+
+                       art: partition@7F0000 {
+                               label = "art";
+                               reg = <0x7F0000 0x10000>;       /* 64 KiB*/
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@168c,0029 {
+               compatible = "pci168c,0029";
+               reg = <0x7000 0 0 0 0>;
+               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+               mtd-mac-address = <&art 0x16>;
+               mtd-mac-address-increment = <1>;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ASL56026.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ASL56026.dts
new file mode 100644 (file)
index 0000000..9a78822
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ASL56026.dts
@@ -0,0 +1,172 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
+       model = "BT OpenReach VDSL Modem";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               dsl: dsl {
+                       label = "asl56026:green:dsl";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+
+               /* power-* is a bicolour led */
+               power_green: power_green {
+                       label = "asl56026:green:power";
+                       gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+
+               power_red: power_red {
+                       label = "asl56026:red:power";
+                       gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               power_led_blink {
+                       gpio-export,name = "power_led_blink";
+                       gpio-export,output = <0>;
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               lantiq,switch;
+
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <3>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy14>;
+               };
+
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+
+               phy14: ethernet-phy@14 {
+                       reg = <0x14>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+       };
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x0800000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x0 0x30000>;
+                       };
+
+                       partition@30000 {
+                               label = "uboot_env";
+                               reg = <0x30000 0x10000>;
+                       };
+
+                       partition@40000 {
+                               label = "firmware";
+                               reg = <0x40000 0x750000>;
+                       };
+
+                       partition@790000 {
+                               label = "ddrconfig";
+                               reg = <0x790000 0x70000>;
+                               read-only;
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/BTHOMEHUBV2B.dts
new file mode 100644 (file)
index 0000000..105dae4
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/BTHOMEHUBV2B.dts
@@ -0,0 +1,262 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
+       model = "BT Home Hub 2B";  /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_orange;
+               led-failsafe = &power_red;
+               led-running = &power_blue;
+
+               led-dsl = &broadband_blue;
+               led-wifi = &wireless_blue;
+       };
+
+       memory@0 {                                /* RAM: Samsung K4H511638F-LC 64MB */
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+               findhandset {
+                       label = "findhandset";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_PHONE>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               upgrading-orange {
+                       label = "bthomehubv2b:orange:upgrading";
+                       gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
+               };
+
+               phone-orange {
+                       label = "bthomehubv2b:orange:phone";
+                       gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
+               };
+               phone-blue {
+                       label = "bthomehubv2b:blue:phone";
+                       gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
+               };
+
+               wireless-orange {
+                       label = "bthomehubv2b:orange:wireless";
+                       gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
+               };
+               wireless_blue: wireless-blue {
+                       label = "bthomehubv2b:blue:wireless";
+                       gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
+               };
+
+               broadband-red {
+                       label = "bthomehubv2b:red:broadband";
+                       gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
+               };
+               broadband-orange {
+                       label = "bthomehubv2b:orange:broadband";
+                       gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
+               };
+               broadband_blue: broadband-blue {
+                       label = "bthomehubv2b:blue:broadband";
+                       gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
+               };
+
+               power_red: power-red {
+                       label = "bthomehubv2b:red:power";
+                       gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
+               };
+               power_orange: power-orange {
+                       label = "bthomehubv2b:orange:power";
+                       gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               power_blue: power-blue {
+                       label = "bthomehubv2b:blue:power";
+                       gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               nand_out {
+                       lantiq,groups = "nand cle", "nand ale";
+                       lantiq,function = "ebu";
+                       lantiq,output = <1>;
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+               nand_cs1 {
+                       lantiq,groups = "nand cs1";
+                       lantiq,function = "ebu";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+               };
+               pci_in {
+                       lantiq,groups = "req1";
+                       lantiq,function = "pci";
+                       lantiq,output = <0>;
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,output = <1>;
+                       lantiq,open-drain = <0>;
+               };
+
+               btn_in {
+                       lantiq,pins = "io2", "io15", "io22";
+                       lantiq,output = <0>;
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+               };
+       };
+};
+
+&gpios {
+       status = "okay";
+};
+
+&gsw {
+       phy-mode = "rmii";
+};
+
+&localbus {
+       nor@0 {                         /* NOR Flash: Spansion S29AL004D 512KB */
+               compatible = "lantiq,nor";      /* "AMD AM29LV400BB" compatible on 3.3.8 */
+               lantiq,cs = <0>;
+               bank-width = <2>;
+               reg = <0 0x0 0x80000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>; /* 256KB */
+                       };
+
+                       partition@40000 {
+                               label = "uboot_env";
+                               reg = <0x40000 0x10000>; /* 64KB */
+                       };
+
+                       partition@50000 {
+                               label = "rg_conf_1";
+                               reg = <0x50000 0x10000>;
+                       };
+
+                       partition@60000 {
+                               label = "rg_conf_2";
+                               reg = <0x60000 0x10000>;
+                       };
+
+                       partition@70000 {
+                               label = "rg_conf_factory";
+                               reg = <0x70000 0x10000>;
+                       };
+               };
+       };
+
+       nand@1 {                  /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
+               compatible = "lantiq,nand-xway";
+               lantiq,cs = <1>;
+               bank-width = <2>;
+               reg = <1 0x0 0x2000000 >;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       ath9k_cal: partition@0 {
+                               label = "art";     /* Atheros 9160 wifi b/g/n radio EEPROM */
+                               reg = <0x00000 0x4000>;
+                               read-only;
+                       };
+
+                       partition@4000 {
+                               label = "kernel";
+                               reg = <0x4000 0x200000>;
+                       };
+
+                       partition@164000 {
+                               label = "ubi";
+                               reg = <0x204000 0x1DFC000>;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@168c,0027 {
+               compatible = "pci168c,0027";
+               reg = <0x7000 0 0 0 0>;
+               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/BTHOMEHUBV3A.dts
new file mode 100644 (file)
index 0000000..6bba7e4
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/BTHOMEHUBV3A.dts
@@ -0,0 +1,215 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9";
+       model = "BT Home Hub 3A";  /* SoC: Lantiq ar9 @ 333MHz */
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_orange;
+               led-failsafe = &power_red;
+               led-running = &power_blue;
+
+               led-dsl = &broadband_blue;
+               led-wifi = &wireless_blue;
+       };
+
+       memory@0 {                                /* RAM: Samsung K4H511638F-LC 64MB */
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+               restart {
+                       label = "restart";
+                       gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_POWER>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               wireless-red {
+                       label = "bthomehubv3a:red:wireless";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+               };
+               wireless-orange {
+                       label = "bthomehubv3a:orange:wireless";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               wireless_blue: wireless-blue {
+                       label = "bthomehubv3a:blue:wireless";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+               };
+
+               broadband-red {
+                       label = "bthomehubv3a:red:broadband";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+               };
+               broadband-orange {
+                       label = "bthomehubv3a:orange:broadband";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+               };
+               broadband_blue: broadband-blue {
+                       label = "bthomehubv3a:blue:broadband";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+
+               power_red: power-red {
+                       label = "bthomehubv3a:red:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+               power_orange: power-orange {
+                       label = "bthomehubv3a:orange:power";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_blue: power-blue {
+                       label = "bthomehubv3a:blue:power";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               nand_out {
+                       lantiq,groups = "nand cle", "nand ale";
+                       lantiq,function = "ebu";
+                       lantiq,output = <1>;
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+               nand_cs1 {
+                       lantiq,groups = "nand cs1";
+                       lantiq,function = "ebu";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+
+               pci_in {
+                       lantiq,groups = "req1";
+                       lantiq,function = "pci";
+                       lantiq,output = <0>;
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+               };
+               pci_out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,output = <1>;
+                       lantiq,open-drain = <0>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "rgmii";
+};
+
+&localbus {
+       nand@1 {                  /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
+               compatible = "lantiq,nand-xway";
+               lantiq,cs = <1>;
+               bank-width = <2>;
+               reg = <1 0x0 0x2000000 >;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "preboot";
+                               reg = <0x00000 0x8000>;
+                               read-only;
+                       };
+                       partition@8000 {
+                               label = "u-boot";
+                               reg = <0x8000 0x05c000>;
+                               read-only;
+                       };
+                       partition@64000 {
+                               label = "uboot_env";
+                               reg = <0x64000 0x004000>;
+                       };
+                       ath9k_cal: partition@68000 {
+                               label = "art-copy";
+                               reg = <0x68000 0x004000>;
+                       };
+                       partition@6c000 {
+                               label = "kernel";
+                               reg = <0x6c000 0x200000>;
+                       };
+                       partition@26c000 {
+                               label = "ubi";
+                               reg = <0x26c000 0x1d94000>;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       ath9k@7000 {
+               reg = <0x7000 0 0 0 0>;
+               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/BTHOMEHUBV5A.dts
new file mode 100644 (file)
index 0000000..acbed18
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/BTHOMEHUBV5A.dts
@@ -0,0 +1,312 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9";
+       model = "BT Home Hub 5A";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_blue;
+
+               led-dsl = &broadband_blue;
+               led-wifi = &wireless_blue;
+       };
+
+       memory@0 {
+               reg = <0x0 0x8000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               restart {
+                       label = "restart";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_POWER>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               /* broadband-* is a single RGB led */
+               broadband-red {
+                       label = "bthomehubv5a:red:broadband";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+               };
+               broadband-green {
+                       label = "bthomehubv5a:green:broadband";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+               broadband_blue: broadband-blue {
+                       label = "bthomehubv5a:blue:broadband";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+
+               /* wireless-* is a single RGB led */
+               wireless-red {
+                       label = "bthomehubv5a:red:wireless";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+               };
+               wireless-green {
+                       label = "bthomehubv5a:green:wireless";
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+               };
+               wireless_blue: wireless-blue {
+                       label = "bthomehubv5a:blue:wireless";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+               };
+
+               /* power-* is a single RGB led */
+               power_red: power-red {
+                       label = "bthomehubv5a:red:power";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+               power_green: power-green {
+                       label = "bthomehubv5a:green:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_blue: power-blue {
+                       label = "bthomehubv5a:blue:power";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               dimmed {
+                       label = "dimmed";
+                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};
+
+&gswip {
+       dsa,member = <0 0>;
+
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+                       label = "lan3";
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+               };
+
+               port@1 {
+                       reg = <1>;
+                       label = "lan4";
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy1>;
+               };
+
+               port@2 {
+                       reg = <2>;
+                       label = "lan2";
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+
+               port@4 {
+                       reg = <4>;
+                       label = "lan1";
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+
+               port@5 {
+                       reg = <5>;
+                       label = "wan";
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+
+               port@6 {
+                       reg = <0x6>;
+                       label = "cpu";
+                       ethernet = <&eth0>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+       compatible = "lantiq,xrx200a2x-gphy";
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+       compatible = "lantiq,xrx200a2x-gphy";
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,output = <1>;
+                       lantiq,open-drain;
+               };
+               pcie_rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+                       lantiq,open-drain;
+               };
+               usb_vbus {
+                       lantiq,pins = "io33";
+                       lantiq,pull = <0>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               nand_out {
+                       lantiq,groups = "nand cle", "nand ale";
+                       lantiq,function = "ebu";
+                       lantiq,output = <1>;
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+               nand_cs1 {
+                       lantiq,groups = "nand cs1";
+                       lantiq,function = "ebu";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+       };
+};
+
+&localbus {
+       nand@1 {
+               compatible = "lantiq,nand-xway";
+               lantiq,cs = <1>;
+               bank-width = <2>;
+               reg = <0x1 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               nand-on-flash-bbt;
+               nand-ecc-strength = <3>;
+               nand-ecc-step-size = <256>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0xa0000>;
+                               read-only;
+                       };
+                       partition@a0000 {
+                               label = "uboot-env";
+                               reg = <0xa0000 0x20000>;
+                               read-only;
+                       };
+                       partition@c0000 {
+                               label = "unused";
+                               reg = <0xc0000 0x40000>;
+                       };
+                       partition@100000 {
+                               label = "ubi";
+                               reg = <0x100000 0x7e80000>;
+                       };
+                       /*
+                        * last 512 KiB are for the bad block table, not writable
+                        */
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@168c,002d {
+               compatible = "pci168c,002d";
+               reg = <0x7000 0 0 0 0>;
+               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+               qca,disable-5ghz;
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN1000B.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN1000B.dts
new file mode 100644 (file)
index 0000000..8982c27
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN1000B.dts
@@ -0,0 +1,173 @@
+/dts-v1/;
+
+#include "amazonse.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
+       model = "Netgear DGN1000B";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+
+               led-dsl = &dsl;
+               led-internet = &online_green;
+       };
+
+       memory@0 {
+               reg = <0x0 0x1000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               dsl: dsl {
+                       label = "dgn1000b:green:dsl";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+               online_green: online {
+                       label = "dgn1000b:green:online";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+               online2 {
+                       label = "dgn1000b:red:online";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+               wps {
+                       label = "dgn1000b:green:wps";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+               power: power {
+                       label = "dgn1000b:green:power";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               /*
+                       power red is missing
+               */
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               asc {
+                       lantiq,groups = "asc";
+                       lantiq,function = "asc";
+               };
+               keys_in {
+                       lantiq,pins = "io0",/* "io25", */"io29";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <1>;
+               };
+       };
+       pins_spi_default: pins_spi_default {
+               spi_in {
+                       lantiq,groups = "spi_di";
+                       lantiq,function = "spi";
+               };
+               spi_out {
+                       lantiq,groups = "spi_do", "spi_clk",
+                               "spi_cs1";
+                       lantiq,function = "spi";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "mii";
+       mac-address = [ 00 11 22 33 44 55 ];
+};
+
+&spi {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       m25p80@1 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <1 0>;
+               spi-max-frequency = <5000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "SPI (RO) U-Boot Image";
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               reg = <0x20000 0x10000>;
+                               label = "ENV_MAC";
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               reg = <0x30000 0x10000>;
+                               label = "DPF";
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               reg = <0x40000 0x10000>;
+                               label = "NVRAM";
+                               read-only;
+                       };
+
+                       partition@500000 {
+                               reg = <0x50000 0x003a0000>;
+                               label = "kernel";
+                       };
+               };
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&usb {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN3500.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN3500.dts
new file mode 100644 (file)
index 0000000..98a2ebd
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN3500.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "DGN3500.dtsi"
+
+/ {
+       compatible = "netgear,dgn3500", "lantiq,xway", "lantiq,ar9";
+       model = "Netgear DGN3500";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN3500.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN3500.dtsi
new file mode 100644 (file)
index 0000000..614845f
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN3500.dtsi
@@ -0,0 +1,213 @@
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       chosen {
+               bootargs = "root= console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+               led-internet = &internet;
+               led-usb = &led_usb;
+               led-wifi = &wifi_green;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       rtl8366rb {
+               compatible = "realtek,rtl8366rb";
+               gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
+               gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
+
+               realtek,initvals = <
+                       0x0000 0x0830
+                       0x0400 0x8130
+                       0x000A 0x83ED
+                       0x0F51 0x0017
+                       0x02F5 0x0048
+                       0x02FA 0xFFDF
+                       0x02FB 0xFFE0
+                       0x0450 0x0000
+                       0x0401 0x0000
+                       0x0431 0x0960
+               >;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               internet: internet {
+                       label = "dgn3500:green:internet";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+               };
+               internet2 {
+                       label = "dgn3500:red:internet";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "dgn3500:green:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               led_usb: usb {
+                       label = "dgn3500:green:usb";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+               };
+               power_green: power {
+                       label = "dgn3500:green:power";
+                       gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_red: power2 {
+                       label = "dgn3500:red:power";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+               };
+               wifi_green: wifi {
+                       label = "dgn3500:green:wireless";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+               wifi2 {
+                       label = "dgn3500:amber:wireless";
+                       gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
+               };
+               wps {
+                       label = "dgn3500:green:wps";
+                       gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+               };
+               pci {
+                       lantiq,groups = "gnt1", "req1";
+                       lantiq,function = "pci";
+               };
+               pci-in {
+                       lantiq,groups = "req1";
+                       lantiq,output = <0>;
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+               };
+               pci-out {
+                       lantiq,groups = "gnt1";
+                       lantiq,output = <1>;
+                       lantiq,pull = <0>;
+               };
+       };
+       pins_spi_default: pins_spi_default {
+               spi_in {
+                       lantiq,groups = "spi_di";
+                       lantiq,function = "spi";
+               };
+               spi_out {
+                       lantiq,groups = "spi_do", "spi_clk",
+                               "spi_cs4";
+                       lantiq,function = "spi";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "mii";
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@168c,0029 {
+               compatible = "pci168c,0029";
+               reg = <0x7000 0 0 0 0>;
+               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+       };
+};
+
+&spi {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <20000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x10000>;
+                               label = "uboot";
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               reg = <0x10000 0x10000>;
+                               label = "uboot-env";
+                               read-only;
+                       };
+
+                       ath9k_cal: partition@20000 {
+                               reg = <0x20000 0x10000>;
+                               label = "calibration";
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               reg = <0x50000 0xfa0000>;
+                               label = "firmware";
+                       };
+               };
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN3500B.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN3500B.dts
new file mode 100644 (file)
index 0000000..d1d788c
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DGN3500B.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "DGN3500.dtsi"
+
+/ {
+       compatible = "netgear,dgn3500b", "lantiq,xway", "lantiq,ar9";
+       model = "Netgear DGN3500B";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DM200.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DM200.dts
new file mode 100644 (file)
index 0000000..8302336
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/DM200.dts
@@ -0,0 +1,216 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9";
+       model = "Netgear DM200";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_amber;
+               led-running = &power_green;
+
+               led-dsl = &dsl_green;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               annexa {
+                       gpio-export,name = "annexa";
+                       gpio-export,output = <0>;
+                       gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+               };
+               annexb {
+                       gpio-export,name = "annexb";
+                       gpio-export,output = <0>;
+                       gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_amber: power_amber {
+                       label = "dm200:amber:power";
+                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+               };
+               power_green: power_green {
+                       label = "dm200:green:power";
+                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+               };
+
+               lan_amber {
+                       label = "dm200:amber:lan";
+                       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               };
+               lan_green {
+                       label = "dm200:green:lan";
+                       gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+               };
+
+               dsl_amber {
+                       label = "dm200:amber:dsl";
+                       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+               };
+               dsl_green: dsl_green {
+                       label = "dm200:green:dsl";
+                       gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&eth0 {
+       lantiq,phys = <&gphy1>;
+
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+       };
+
+       pins_spi_default: pins_spi_default {
+               spi_in {
+                       lantiq,groups = "spi_di";
+                       lantiq,function = "spi";
+               };
+               spi_out {
+                       lantiq,groups = "spi_do", "spi_clk", "spi_cs4";
+                       lantiq,function = "spi";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&pcie0 {
+       status = "disabled";
+};
+
+&spi {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "uboot";
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               reg = <0x20000 0x10000>;
+                               label = "gphyfirmware";
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               reg = <0x30000 0x7b0000>;
+                               label = "firmware";
+                       };
+
+                       partition@7e0000 {
+                               reg = <0x7e0000 0x10000>;
+                               label = "sysconfig";
+                               read-only;
+                       };
+
+                       partition@7f0000 {
+                               reg = <0x7f0000 0x2000>;
+                               label = "ubootconfig";
+                               read-only;
+                       };
+
+                       partition@7f2000 {
+                               reg = <0x7f2000 0x1000>;
+                               label = "ART";
+                               read-only;
+                       };
+
+                       partition@7f3000 {
+                               reg = <0x7f3000 0x1000>;
+                               label = "pot";
+                               read-only;
+                       };
+
+                       partition@7f4000 {
+                               reg = <0x7f4000 0xc000>;
+                               label = "ret";
+                               read-only;
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY50712.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY50712.dts
new file mode 100644 (file)
index 0000000..ec287ab
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY50712.dts
@@ -0,0 +1,81 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+/ {
+       compatible = "lantiq,easy50712", "lantiq,xway", "lantiq,danube";
+       model = "Intel EASY50712 Nand";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               stp {
+                       lantiq,groups = "stp";
+                       lantiq,function = "stp";
+               };
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+               };
+               pci {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+               };
+               conf_out {
+                       lantiq,pins = "io4", "io5", "io6"; /* stp */
+                       lantiq,open-drain;
+                       lantiq,pull = <0>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "rmii";
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>; /* 64 KB */
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x10000 0x10000>; /* 64 KB */
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x3d0000>;
+                       };
+
+                       partition@400000 {
+                               label = "rootfs";
+                               reg = <0x400000 0x400000>;
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY50810.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY50810.dts
new file mode 100644 (file)
index 0000000..21562dc
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY50810.dts
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+/ {
+       compatible = "lantiq,easy50810", "lantiq,xway", "lantiq,ar9";
+       model = "Lantiq EASY50810";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               stp {
+                       lantiq,groups = "stp";
+                       lantiq,function = "stp";
+               };
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+               };
+               pci {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+               };
+               conf_out {
+                       lantiq,pins = "io4", "io5", "io6"; /* stp */
+                       lantiq,open-drain;
+                       lantiq,pull = <0>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "rmii";
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>; /* 64 KB */
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x10000 0x10000>; /* 64 KB */
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x3d0000>;
+                       };
+
+                       partition@400000 {
+                               label = "rootfs";
+                               reg = <0x400000 0x400000>;
+                       };
+               };
+       };
+};
+
+&stp {
+       status = "okay";
+       lantiq,shadow = <0xfff>;
+       lantiq,groups = <0x3>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY80920.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY80920.dtsi
new file mode 100644 (file)
index 0000000..464ab5b
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY80920.dtsi
@@ -0,0 +1,312 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+
+               led-usb = &led_usb1;
+               led-usb2 = &led_usb2;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+/*             reset {
+                       label = "reset";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };*/
+               paging {
+                       label = "paging";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_PHONE>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power: power {
+                       label = "easy80920:green:power";
+                       gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               warning {
+                       label = "easy80920:green:warning";
+                       gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
+               };
+               fxs1 {
+                       label = "easy80920:green:fxs1";
+                       gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
+               };
+               fxs2 {
+                       label = "easy80920:green:fxs2";
+                       gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
+               };
+               fxo {
+                       label = "easy80920:green:fxo";
+                       gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
+               };
+               led_usb1: usb1 {
+                       label = "easy80920:green:usb1";
+                       gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
+               };
+               led_usb2: usb2 {
+                       label = "easy80920:green:usb2";
+                       gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
+               };
+               sd {
+                       label = "easy80920:green:sd";
+                       gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
+               };
+               wps {
+                       label = "easy80920:green:wps";
+                       gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               lantiq,switch;
+
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <1>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy1>;
+               };
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+               };
+       };
+
+       wan: interface@1 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <1>;
+               lantiq,wan;
+
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               exin3 {
+                       lantiq,groups = "exin3";
+                       lantiq,function = "exin";
+               };
+               stp {
+                       lantiq,groups = "stp";
+                       lantiq,function = "stp";
+               };
+               nand {
+                       lantiq,groups = "nand cle", "nand ale",
+                                       "nand rd", "nand rdy";
+                       lantiq,function = "ebu";
+               };
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               pci {
+                       lantiq,groups = "gnt1", "req1";
+                       lantiq,function = "pci";
+               };
+               conf_out {
+                       lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
+                                       "io4", "io5", "io6", /* stp */
+                                       "io21",
+                                       "io33";
+                       lantiq,open-drain;
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+               pcie-rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+               conf_in {
+                       lantiq,pins = "io39", /* exin3 */
+                                       "io48"; /* nand rdy */
+                       lantiq,pull = <2>;
+               };
+       };
+       pins_spi_default: pins_spi_default {
+               spi_in {
+                       lantiq,groups = "spi_di";
+                       lantiq,function = "spi";
+               };
+               spi_out {
+                       lantiq,groups = "spi_do", "spi_clk",
+                               "spi_cs4";
+                       lantiq,function = "spi";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&spi {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       status = "okay";
+
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <1000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "SPI (RO) U-Boot Image";
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               reg = <0x20000 0x10000>;
+                               label = "ENV_MAC";
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               reg = <0x30000 0x10000>;
+                               label = "DPF";
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               reg = <0x40000 0x10000>;
+                               label = "NVRAM";
+                               read-only;
+                       };
+
+                       partition@500000 {
+                               reg = <0x50000 0x003a0000>;
+                               label = "kernel";
+                       };
+               };
+       };
+};
+
+&stp {
+       status = "okay";
+
+       lantiq,shadow = <0xffff>;
+       lantiq,groups = <0x7>;
+       lantiq,dsl = <0x3>;
+       lantiq,phy1 = <0x7>;
+       lantiq,phy2 = <0x7>;
+       /* lantiq,rising; */
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY80920NAND.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY80920NAND.dts
new file mode 100644 (file)
index 0000000..0134a7c
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY80920NAND.dts
@@ -0,0 +1,65 @@
+/dts-v1/;
+
+
+#include "EASY80920.dtsi"
+
+/ {
+       compatible = "lantiq,easy80920-nand", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
+       model = "Intel EASY80920 Nand";
+
+       chosen {
+               bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1";
+       };
+};
+
+&localbus {
+       nand@0 {
+               compatible = "lantiq,nand-xway";
+               lantiq,cs = <1>;
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x100000>; /* 1024 KB */
+                       };
+
+                       partition@100000 {
+                               label = "uboot_env";
+                               reg = <0x100000 0x40000>; /* 256 KB */
+                       };
+
+                       partition@140000 {
+                               label = "ubootconfigB";
+                               reg = <0x140000 0x40000>; /* 256 KB */
+                       };
+
+                       partition@180000 {
+                               label = "gphyfirmware";
+                               reg = <0x180000 0x40000>; /* 256 KB */
+                       };
+
+                       partition@1c0000 {
+                               label = "ubi";
+                               reg = <0x1c0000 0xc800000>;
+                       };
+
+                       partition@c9c0000 {
+                               label = "calibration";
+                               reg = <0xc9c0000 0x100000>;
+                       };
+
+                       partition@cac0000 {
+                               label = "res";
+                               reg = <0xcac0000 0x13540000>;
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY80920NOR.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY80920NOR.dts
new file mode 100644 (file)
index 0000000..9adc0b4
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY80920NOR.dts
@@ -0,0 +1,39 @@
+/dts-v1/;
+
+#include "EASY80920.dtsi"
+
+/ {
+       compatible = "lantiq,easy80920-nor", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
+       model = "Intel EASY80920 Nor";
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x10000>;
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x10000 0x10000>;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x7e0000>;
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY88388.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY88388.dts
new file mode 100644 (file)
index 0000000..a9c5b3c
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY88388.dts
@@ -0,0 +1,106 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+       model = "Lantiq Falcon FTTDP8 Reference Board";
+       compatible = "lantiq,easy88388", "lantiq,falcon";
+
+       aliases {
+               spi0 = &ebu_cs0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;  // 64M at 0x0
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       pinctrl {
+               led_pins: led-pins {
+                       lantiq,pins = "io34", "io35", "io36", "io37", "io38", 
+                                       "io39", "io40", "io41";
+                       lantiq,function = "gpio";
+               };
+       };
+
+       easy88388-leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins &bootled_pins>;
+
+               GPON {
+                       label = "easy88388:green:gpon";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               TEST {
+                       label = "easy88388:green:test";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               STATUS {
+                       label = "easy88388:green:status";
+                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               ERROR {
+                       label = "easy88388:red:error";
+                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               DSL1 {
+                       label = "easy88388:dsl:1";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               DSL2 {
+                       label = "easy88388:dsl:2";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               DSL3 {
+                       label = "easy88388:dsl:3";
+                       gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               DSL4 {
+                       label = "easy88388:dsl:4";
+                       gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               DSL5 {
+                       label = "easy88388:dsl:5";
+                       gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               DSL6 {
+                       label = "easy88388:dsl:6";
+                       gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               DSL7 {
+                       label = "easy88388:dsl:7";
+                       gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               DSL8 {
+                       label = "easy88388:dsl:8";
+                       gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+       };
+};
+

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY88444.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY88444.dts
new file mode 100644 (file)
index 0000000..ceb81ea
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY88444.dts
@@ -0,0 +1,80 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+       model = "Lantiq Falcon FTTdp G.FAST Reference Board";
+       compatible = "lantiq,easy88444", "lantiq,falcon";
+
+       aliases {
+               spi0 = &ebu_cs0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;  // 64M at 0x0
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       pinctrl {
+               led_pins: led-pins {
+                       lantiq,pins = "io34", "io35", "io37";
+                       lantiq,function = "gpio";
+               };
+       };
+
+       easy88444-leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins &bootled_pins>;
+
+               GPON {
+                       label = "easy88444:green:gpon";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               TEST {
+                       label = "easy88444:green:test";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               STATUS {
+                       label = "easy88444:green:status";
+                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               GFAST1 {
+                       label = "easy88444:gfast:1";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               GFAST2 {
+                       label = "easy88444:gfast:2";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               GFAST3 {
+                       label = "easy88444:gfast:3";
+                       gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               GFAST4 {
+                       label = "easy88444:gfast:4";
+                       gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+       };
+};
+

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000-base.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000-base.dtsi
new file mode 100644 (file)
index 0000000..cfe1140
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000-base.dtsi
@@ -0,0 +1,110 @@
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       compatible = "lantiq,easy98000", "lantiq,falcon";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       easy98000-leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&bootled_pins>;
+
+               LED_0 {
+                       label = "easy98000:green:gpon";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_1 {
+                       label = "easy98000:red:gpon";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_2 {
+                       label = "easy98000:green:gpon_tx";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_3 {
+                       label = "easy98000:green:gpon_rx";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_4 {
+                       label = "easy98000:green:voice";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_5 {
+                       label = "easy98000:green:status";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+       };
+};
+
+&ebu_cs1 {
+       eth0: ethernet@0000000 {
+               compatible = "davicom,dm9000";
+               device_type = "network";
+               reg = <0x0000003 0x1>, <0x0000001 0x1>;
+               reg-names = "addr", "data";
+               interrupt-parent = <&gpio1>;
+               #interrupt-cells = <2>;
+               interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+               local-mac-address = [ 00 00 00 00 00 00 ];
+       };
+
+       cpld@3c00000 {
+               compatible = "lantiq,easy98000_addon";
+               reg = <0x3c00000 0x2>;
+       };
+
+       cpld@3c0000c {
+               compatible = "lantiq,easy98000_cpld_led";
+               reg = <0x3c0000c 0x2>,  <0x3c00012 0x2>;
+       };
+};
+
+/* // enable this for second uart:
+&serial1 {
+       status = "okay";
+};*/
+
+&spi {
+       status = "okay";
+
+       eeprom@1 {
+               compatible = "atmel,at25", "atmel,at25160n";
+               reg = <2>;
+               spi-max-frequency = <1000000>;
+               spi-cpha;
+               spi-cpol;
+
+               pagesize = <32>;
+               size = <2048>;
+               address-width = <16>;
+       };
+};
+
+&i2c {
+       status = "okay";
+
+       clock-frequency = <100000>;
+
+       /* eeprom-emulation by OMU */
+       eeprom@50 {
+               compatible = "at,24c02";
+               reg = <0x50>;
+       };
+       eeprom@51 {
+               compatible = "at,24c02";
+               reg = <0x51>;
+       };
+};
+

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000NAND.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000NAND.dts
new file mode 100644 (file)
index 0000000..a40cef3
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000NAND.dts
@@ -0,0 +1,40 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "EASY98000-base.dtsi"
+
+/ {
+       model = "Lantiq Falcon (NAND)";
+       compatible = "lantiq,easy98000-nand", "lantiq,easy98000", "lantiq,falcon";
+
+       aliases {
+               spi0 = &spi;
+       };
+};
+
+&ebu_cs0 {
+       gen_nand@0 {
+               compatible = "gen_nand", "lantiq,nand-falcon";
+               bank-width = <1>;
+               reg = <0x0 0x40000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               linux,mtd-name = "gen_nand";
+               bbt-use-flash;
+
+               partition@0 {
+                       label = "uboot";
+                       reg = <0x00000 0x40000>;
+               };
+
+               partition@10000 {
+                       label = "uboot_env";
+                       reg = <0x40000 0x40000>;
+               };
+
+               partition@20000 {
+                       label = "linux";
+                       reg = <0x80000 0x3d0000>;
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000NOR.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000NOR.dts
new file mode 100644 (file)
index 0000000..ad53bf9
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000NOR.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "EASY98000-base.dtsi"
+
+/ {
+       model = "Lantiq Falcon (NOR)";
+       compatible = "lantiq,easy98000-nor", "lantiq,easy98000", "lantiq,falcon";
+
+       aliases {
+               spi0 = &spi;
+       };
+};
+
+&ebu_cs0 {
+       cfi@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0x0 0x4000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "uboot";
+                       reg = <0x00000 0x40000>;
+               };
+
+               partition@10000 {
+                       label = "uboot_env";
+                       reg = <0x40000 0x40000>;
+               };
+
+               partition@20000 {
+                       label = "linux";
+                       reg = <0x80000 0x3d0000>;
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000SFLASH.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000SFLASH.dts
new file mode 100644 (file)
index 0000000..bbe524e
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98000SFLASH.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "EASY98000-base.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+       model = "Lantiq Falcon (SFLASH)";
+       compatible = "lantiq,easy98000-sflash", "lantiq,easy98000", "lantiq,falcon";
+
+       aliases {
+               spi0 = &ebu_cs0;
+               spi1 = &spi;
+       };
+};
+

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98020.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98020.dts
new file mode 100644 (file)
index 0000000..c0970ef
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98020.dts
@@ -0,0 +1,95 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+       model = "Lantiq Falcon Reference Board";
+       compatible = "lantiq,easy98020", "lantiq,falcon";
+
+       aliases {
+               spi0 = &ebu_cs0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;  // 64M at 0x0
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       pinctrl {
+               led_pins: phy-led-pins {
+                       lantiq,pins = "io42", "io41", "io38", "io37";
+                       lantiq,function = "gpio";
+               };
+       };
+
+       easy98020-leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&bootled_pins>;
+
+               GPON {
+                       label = "easy98020:green:gpon";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               TEST {
+                       label = "easy98020:green:test";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               ETH {
+                       label = "easy98020:green:status";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               VOICE {
+                       label = "easy98020:green:voice";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               VIDEO {
+                       label = "easy98020:green:video";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+       };
+
+       easy98020-phy-leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins>;
+
+               GE0_ACT {
+                       label = "easy98020:ge0_act";
+                       gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               GE0_LINK {
+                       label = "easy98020:ge0_link";
+                       gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               GE1_ACT {
+                       label = "easy98020:ge1_act";
+                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+               GE1_LINK {
+                       label = "easy98020:ge1_link";
+                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98020V18.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98020V18.dts
new file mode 100644 (file)
index 0000000..9aa1be9
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98020V18.dts
@@ -0,0 +1,68 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+       model = "Lantiq Falcon Reference Board V1.8";
+       compatible = "lantiq,easy98020-v18", "lantiq,easy98020", "lantiq,falcon";
+
+       aliases {
+               spi0 = &ebu_cs0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;  // 64M at 0x0
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       pinctrl {
+               led_pins: led-pins {
+                       lantiq,pins = "io11", "io14", "io36", "io37", "io38";
+                       lantiq,function = "gpio";
+               };
+       };
+
+       easy98020-leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins &bootled_pins>;
+
+               GPON {
+                       label = "easy98020:green:gpon";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               TEST {
+                       label = "easy98020:green:test";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               ETH {
+                       label = "easy98020:green:status";
+                       gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               VOICE {
+                       label = "easy98020:green:voice";
+                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               VIDEO {
+                       label = "easy98020:green:video";
+                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98021.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98021.dts
new file mode 100644 (file)
index 0000000..7b2e490
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98021.dts
@@ -0,0 +1,81 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+       model = "Lantiq Falcon HGU Reference Board";
+       compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon";
+
+       aliases {
+               spi0 = &ebu_cs0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;  // 64M at 0x0
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       gpio-mmc {
+               /* Place-holder for SIM-Card connector,
+                  to list the used GPIOs, no official binding */
+               compatible = "gpio-mmc";
+               gpios =  <&gpio0 3 GPIO_ACTIVE_HIGH>,
+                        <&gpio0 3 GPIO_ACTIVE_HIGH>,
+                        <&gpio0 2 GPIO_ACTIVE_HIGH>,
+                        <0>; /* no CS */
+               gpio-names = "di", "do", "clk", "cs";
+               reset-gpio =  <&gpio3 24 GPIO_ACTIVE_HIGH>;
+       };
+
+       pinctrl {
+               led_pins: led-pins {
+                       lantiq,pins = "io11", "io14", "io36", "io37", "io38";
+                       lantiq,function = "gpio";
+               };
+       };
+
+       easy98021-leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins &bootled_pins>;
+
+               GPON {
+                       label = "easy98021:green:gpon";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               TEST {
+                       label = "easy98021:red:test";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               ETH {
+                       label = "easy98021:green:status";
+                       gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               VOICE {
+                       label = "easy98021:green:voice";
+                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               SIMCARD {
+                       label = "easy98021:green:simcard";
+                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+       };
+};
+

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98035SYNCE.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98035SYNCE.dts
new file mode 100644 (file)
index 0000000..df941cd
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98035SYNCE.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+       model = "Lantiq Falcon SFP Stick with SyncE";
+       compatible = "lantiq,easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon";
+
+       aliases {
+               spi0 = &ebu_cs0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;  // 64M at 0x0
+       };
+
+       pinctrl {
+               compatible = "lantiq,pinctrl-falcon";
+
+               asc0_func1: func1 {
+                       func1_tx {
+                               lantiq,pins = "io32";
+                               lantiq,mux = <1>;
+                               lantiq,input = <0>;
+                       };
+                       func1_rx {
+                               lantiq,pins = "io33";
+                               lantiq,mux = <0>;
+                       };
+               };
+               asc0_func2: func2 {
+                       func2_tx {
+                               lantiq,pins = "io32";
+                               lantiq,mux = <0>;
+                       };
+                       func2_rx {
+                               lantiq,pins = "io33";
+                               lantiq,mux = <1>;
+                               lantiq,input = <0>;
+                       };
+               };
+               asc0_func3: func3 {
+                       func3_tx {
+                               lantiq,pins = "io32";
+                               lantiq,mux = <1>;
+                               lantiq,input = <0>;
+                       };
+                       func3_rx {
+                               lantiq,pins = "io33";
+                               lantiq,mux = <1>;
+                               lantiq,input = <0>;
+                       };
+               };
+       };
+
+       pinselect-asc0 {
+               compatible = "lantiq,pinselect-asc0";
+               pinctrl-names = "asc0", "func1", "func2", "func3";
+               pinctrl-0 = <&asc0_pins>;
+               pinctrl-1 = <&asc0_func1>;
+               pinctrl-2 = <&asc0_func2>;
+               pinctrl-3 = <&asc0_func3>;
+       };
+};
+
+&serial0 {
+       pinctrl-names = "default";
+       /* use "empty" pinctrl to leave setting from u-boot enabled */
+       pinctrl-0 = < >;
+};
+
+&i2c {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98035SYNCE1588.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98035SYNCE1588.dts
new file mode 100644 (file)
index 0000000..a3abc6e
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/EASY98035SYNCE1588.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+       model = "Lantiq Falcon SFP Stick with SyncE/1588";
+       compatible = "lantiq,easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon";
+
+       aliases {
+               spi0 = &ebu_cs0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;  // 64M at 0x0
+       };
+
+       pinctrl {
+               compatible = "lantiq,pinctrl-falcon";
+
+               asc0_func1: func1 {
+                       func1_tx {
+                               lantiq,pins = "io32";
+                               lantiq,mux = <1>;
+                               lantiq,input = <0>;
+                       };
+                       func1_rx {
+                               lantiq,pins = "io33";
+                               lantiq,mux = <0>;
+                       };
+               };
+               asc0_func2: func2 {
+                       func2_tx {
+                               lantiq,pins = "io32";
+                               lantiq,mux = <0>;
+                       };
+                       func2_rx {
+                               lantiq,pins = "io33";
+                               lantiq,mux = <1>;
+                               lantiq,input = <0>;
+                       };
+               };
+               asc0_func3: func3 {
+                       func3_tx {
+                               lantiq,pins = "io32";
+                               lantiq,mux = <1>;
+                               lantiq,input = <0>;
+                       };
+                       func3_rx {
+                               lantiq,pins = "io33";
+                               lantiq,mux = <1>;
+                               lantiq,input = <0>;
+                       };
+               };
+       };
+
+       pinselect-asc0 {
+               compatible = "lantiq,pinselect-asc0";
+               pinctrl-names = "asc0", "func1", "func2", "func3";
+               pinctrl-0 = <&asc0_pins>;
+               pinctrl-1 = <&asc0_func1>;
+               pinctrl-2 = <&asc0_func2>;
+               pinctrl-3 = <&asc0_func3>;
+       };
+};
+
+&serial0 {
+       pinctrl-names = "default";
+       /* use "empty" pinctrl to leave setting from u-boot enabled */
+       pinctrl-0 = < >;
+};
+
+&i2c {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FALCON-MDU.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FALCON-MDU.dts
new file mode 100644 (file)
index 0000000..6710bbe
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FALCON-MDU.dts
@@ -0,0 +1,53 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+       model = "Lantiq Falcon / Vinax MDU Board";
+       compatible = "lantiq,falcon-mdu", "lantiq,falcon";
+
+       aliases {
+               spi0 = &ebu_cs0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;  // 64M at 0x0
+       };
+
+       mdu-leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&bootled_pins>;
+
+               LED_0 {
+                       label = "mdu:green:gpon";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_1 {
+                       label = "mdu:green:status";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_2 {
+                       label = "mdu:green:2";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_3 {
+                       label = "mdu:green:3";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+               LED_4 {
+                       label = "mdu:green:4";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+                       default-state = "keep";
+               };
+       };
+};
+

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FALCON-SFP.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FALCON-SFP.dts
new file mode 100644 (file)
index 0000000..8d45de4
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FALCON-SFP.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+       model = "Lantiq Falcon SFP Stick";
+       compatible = "lantiq,falcon-sfp", "lantiq,falcon";
+
+       aliases {
+               spi0 = &ebu_cs0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;  // 64M at 0x0
+       };
+
+       pinctrl {
+               compatible = "lantiq,pinctrl-falcon";
+
+               asc0_func1: func1 {
+                       func1_tx {
+                               lantiq,pins = "io32";
+                               lantiq,mux = <1>;
+                               lantiq,output = <0>;
+                       };
+                       func1_rx {
+                               lantiq,pins = "io33";
+                               lantiq,mux = <0>;
+                       };
+               };
+               asc0_func2: func2 {
+                       func2_tx {
+                               lantiq,pins = "io32";
+                               lantiq,mux = <0>;
+                       };
+                       func2_rx {
+                               lantiq,pins = "io33";
+                               lantiq,mux = <1>;
+                               lantiq,input = <0>;
+                       };
+               };
+               asc0_func3: func3 {
+                       func3_tx {
+                               lantiq,pins = "io32";
+                               lantiq,mux = <1>;
+                               lantiq,output = <0>;
+                       };
+                       func3_rx {
+                               lantiq,pins = "io33";
+                               lantiq,mux = <1>;
+                               lantiq,input = <0>;
+                       };
+               };
+       };
+
+       pinselect-asc0 {
+               compatible = "lantiq,pinselect-asc0";
+               pinctrl-names = "asc0", "func1", "func2", "func3";
+               pinctrl-0 = <&asc0_pins>;
+               pinctrl-1 = <&asc0_func1>;
+               pinctrl-2 = <&asc0_func2>;
+               pinctrl-3 = <&asc0_func3>;
+       };
+};
+
+&serial0 {
+       pinctrl-names = "default";
+       /* use "empty" pinctrl to leave setting from u-boot enabled */
+       pinctrl-0 = < >;
+};
+
+&i2c {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FRITZ3370.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FRITZ3370.dts
new file mode 100644 (file)
index 0000000..a958fc6
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FRITZ3370.dts
@@ -0,0 +1,296 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "avm,fritz3370", "lantiq,xway", "lantiq,vr9";
+       model = "Fritz!Box WLAN 3370";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+               led-internet = &info_green;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x8000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               power {
+                       label = "power";
+                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_POWER>;
+               };
+/*             wifi {
+                       label = "wifi";
+                       gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+                       linux,code = <BTN_1>;
+               };*/
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_green: power {
+                       label = "fritz3370:green:power";
+                       gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_red: power2 {
+                       label = "fritz3370:red:power";
+                       gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+               };
+               info_red {
+                       label = "fritz3370:red:info";
+                       gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "fritz3370:green:wlan";
+                       gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "fritz3370:green:dsl";
+                       gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+               };
+               lan {
+                       label = "fritz3370:green:lan";
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+               };
+               info_green: info_green {
+                       label = "fritz3370:green:info";
+                       gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&urlader 0x987>;
+               mtd-mac-address-increment = <(-2)>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+                       gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <1>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy1>;
+                       gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               nand {
+                       lantiq,groups = "nand cle", "nand ale",
+                                       "nand rd", "nand cs1", "nand rdy";
+                       lantiq,function = "ebu";
+                       lantiq,pull = <1>;
+               };
+               phy-rst {
+                       lantiq,pins = "io37", "io44";
+                       lantiq,pull = <0>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               pcie-rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+       pins_spi_default: pins_spi_default {
+               spi_in {
+                       lantiq,groups = "spi_di";
+                       lantiq,function = "spi";
+               };
+               spi_out {
+                       lantiq,groups = "spi_do", "spi_clk",
+                               "spi_cs4";
+                       lantiq,function = "spi";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&localbus {
+       nand@1 {
+               compatible = "lantiq,nand-xway";
+               bank-width = <2>;
+               reg = <1 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "kernel";
+                               reg = <0x0 0x400000>;
+                       };
+
+                       partition@400000 {
+                               label = "rootfs_ubi";
+                               reg = <0x400000 0x3000000>;
+                       };
+
+                       partition@3400000 {
+                               label = "vr9_firmware";
+                               reg = <0x3400000 0x400000>;
+                       };
+                       partition@3800000 {
+                               label = "reserved";
+                               reg = <0x3800000 0x3000000>;
+                       };
+                       partition@6800000 {
+                               label = "config";
+                               reg = <0x6800000 0x200000>;
+                       };
+                       partition@6a00000 {
+                               label = "nand-filesystem";
+                               reg = <0x6a00000 0x1600000>;
+                       };
+               };
+       };
+};
+
+&pcie0 {
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+
+               wifi@0,0 {
+                       compatible = "pci0,0";
+                       reg = <0 0 0 0 0>;
+                       qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <1000000>;
+
+               urlader: partition@0 {
+                       reg = <0x0 0x20000>;
+                       label = "urlader";
+                       read-only;
+               };
+
+               partition@20000 {
+                       reg = <0x20000 0x10000>;
+                       label = "tffs (1)";
+                       read-only;
+               };
+
+               partition@30000 {
+                       reg = <0x30000 0x10000>;
+                       label = "tffs (2)";
+                       read-only;
+               };
+       };
+};
+
+/*
+ * TODO: add phy-supply, gpio 5 GPIO_ACTIVE_HIGH and gpio 14 GPIO_ACTIVE_HIGH are
+ * related
+ */
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FRITZ7320.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FRITZ7320.dts
new file mode 100644 (file)
index 0000000..eed4ae3
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FRITZ7320.dts
@@ -0,0 +1,163 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
+       model = "1&1 HomeServer";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+
+               led-internet = &info_green;
+               led-dsl = &power;
+               led-wifi = &wlan;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               dect {
+                       label = "dect";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_PHONE>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power: power {
+                       label = "fritz7320:green:power";
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               voice {
+                       label = "fritz7320:green:fon";
+                       gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+               };
+               dect {
+                       label = "fritz7320:green:dect";
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+               };
+               wlan: wlan {
+                       label = "fritz7320:green:wlan";
+                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+               };
+               info_green: info_green {
+                       label = "fritz7320:green:info";
+                       gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+               };
+               info_red {
+                       label = "fritz7320:red:info";
+                       gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               pci {
+                       lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
+                       lantiq,function = "pci";
+               };
+               pci-in {
+                       lantiq,groups = "req1", "req2", "req3", "req4";
+                       lantiq,output = <0>;
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+               };
+               pci-out {
+                       lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
+                       lantiq,output = <1>;
+                       lantiq,pull = <0>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&ath9k_cal 0xa91>;
+       mtd-mac-address-increment = <(-2)>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x1000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       ath9k_cal: partition@0 {
+                               label = "urlader";
+                               reg = <0x00000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0xf60000>;
+                       };
+
+                       partition@f80000 {
+                               label = "tffs (1)";
+                               reg = <0xf80000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@fc0000 {
+                               label = "tffs (2)";
+                               reg = <0xfc0000 0x40000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       req-mask = <0xf>;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@0,0 {
+               compatible = "pci0,0";
+               reg = <0x7000 0 0 0 0>;
+               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FRITZ7360SL.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FRITZ7360SL.dts
new file mode 100644 (file)
index 0000000..a0f5d8e
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/FRITZ7360SL.dts
@@ -0,0 +1,239 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "avm,fritz7360sl", "lantiq,xway", "lantiq,vr9";
+       model = "1&1 HomeServer";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &info_green;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x8000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               dect {
+                       label = "dect";
+                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_PHONE>;
+               };
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_WLAN>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_green: power {
+                       label = "fritz7360sl:green:power";
+                       gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_red: power2 {
+                       label = "fritz7360sl:red:power";
+                       gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+               };
+               info_red {
+                       label = "fritz7360sl:red:info";
+                       gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+               };
+               info_green: info_green {
+                       label = "fritz7360sl:green:info";
+                       gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "fritz7360sl:green:wlan";
+                       gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+               };
+               dect {
+                       label = "fritz7360sl:green:dect";
+                       gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&urlader 0xa91>;
+               mtd-mac-address-increment = <(-2)>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rmii";
+                       phy-handle = <&phy0>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <1>;
+                       phy-mode = "rmii";
+                       phy-handle = <&phy1>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x00>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x01>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               phy-rst {
+                       lantiq,pins = "io37", "io44";
+                       lantiq,pull = <0>;
+                       lantiq,open-drain;
+                       lantiq,output = <1>;
+               };
+               pcie-rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x1000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       urlader: partition@0 {
+                               label = "urlader";
+                               reg = <0x00000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0xf60000>;
+                       };
+
+                       partition@f80000 {
+                               label = "tffs (1)";
+                               reg = <0xf80000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@fc0000 {
+                               label = "tffs (2)";
+                               reg = <0xfc0000 0x40000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pcie0 {
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+
+               wifi@168c,002e {
+                       compatible = "pci168c,002e";
+                       reg = <0 0 0 0 0>;
+                       qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+               };
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb_phy1 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/GIGASX76X.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/GIGASX76X.dts
new file mode 100644 (file)
index 0000000..fc028bb
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/GIGASX76X.dts
@@ -0,0 +1,130 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube";
+       model = "Gigaset SX761,SX762,SX763";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               switch {
+                       gpio-export,name = "switch";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 29 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               stp {
+                       lantiq,groups = "stp";
+                       lantiq,function = "stp";
+               };
+       };
+};
+
+
+&gpiomm {
+       status = "okay";
+       lantiq,shadow = <0x3>;
+};
+
+&gpios {
+       status = "okay";
+};
+
+&gsw {
+       phy-mode = "rmii";
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x0 0x30000>;
+                       };
+
+                       partition@10000 {
+                               label = "uboot_env";
+                               reg = <0x30000 0x10000>;
+                       };
+
+                       partition@40000 {
+                               label = "firmware";
+                               reg = <0x40000 0x7c0000>;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/H201L.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/H201L.dts
new file mode 100644 (file)
index 0000000..43a4b42
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/H201L.dts
@@ -0,0 +1,174 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "zte,h201l", "lantiq,xway", "lantiq,ar9";
+       model = "ZTE H210L";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_green;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+               led-internet = &online;
+               led-usb = &led_usb;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_green: power {
+                       label = "h201l:green:power";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               online: online {
+                       label = "h201l:green:internet";
+                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "h201l:green:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               phone {
+                       label = "h201l:green:phone";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+               };
+               wps {
+                       label = "h201l:green:wps";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "h201l:green:wlan";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+               led_usb: usb {
+                       label = "h201l:green:usb";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               switch {
+                       gpio-export,name = "switch";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
+               };
+               usb {
+                       gpio-export,name = "usb";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+               };
+               wifi {
+                       gpio-export,name = "wifi";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+       };
+};
+
+&gsw {
+       phy-mode = "rgmii";
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "uboot_env";
+                               reg = <0x20000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "firmware";
+                               reg = <0x30000 0x7d0000>;
+                       };
+               };
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+
+&usb0 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2601HNFX.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2601HNFX.dts
new file mode 100644 (file)
index 0000000..267a4f3
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2601HNFX.dts
@@ -0,0 +1,194 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
+       model = "ZyXEL P-2601HN-Fx";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+               led-internet = &online;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_green: power {
+                       label = "p2601hnfx:green:power";
+                       gpios = <&stp 11 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_red: power2 {
+                       label = "p2601hnfx:red:power";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+               };
+               online: online {
+                       label = "p2601hnfx:green:internet";
+                       gpios = <&stp 13 GPIO_ACTIVE_LOW>;
+               };
+               online2 {
+                       label = "p2601hnfx:red:internet";
+                       gpios = <&stp 12 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "p2601hnfx:green:dsl";
+                       gpios = <&stp 14 GPIO_ACTIVE_LOW>;
+               };
+               phone {
+                       label = "p2601hnfx:green:phone";
+                       gpios = <&stp 9 GPIO_ACTIVE_LOW>;
+               };
+               phone2 {
+                       label = "p2601hnfx:orange:phone";
+                       gpios = <&stp 8 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "p2601hnfx:green:wireless";
+                       gpios = <&stp 15 GPIO_ACTIVE_LOW>;
+               };
+               wifi2 {
+                       label = "p2601hnfx:orange:wireless";
+                       gpios = <&stp 10 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               switch {
+                       gpio-export,name = "switch";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               stp {
+                       lantiq,groups = "stp";
+                       lantiq,function = "stp";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               exin {
+                       lantiq,groups = "exin1";
+                       lantiq,function = "exin";
+               };
+               pci {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+               };
+               conf_out {
+                       lantiq,pins = "io4", "io5", "io6";
+                       lantiq,open-drain;
+                       lantiq,pull = <0>;
+               };
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gsw {
+       phy-mode = "rmii";
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "uboot_env";
+                               reg = <0x40000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "firmware";
+                               reg = <0x60000 0xfa0000>;
+                       };
+               };
+       };
+};
+
+&stp {
+       lantiq,shadow = <0xfff>;
+       lantiq,groups = <0x3>;
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2812HNUF1.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2812HNUF1.dts
new file mode 100644 (file)
index 0000000..911a2d6
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2812HNUF1.dts
@@ -0,0 +1,70 @@
+/dts-v1/;
+
+#include "P2812HNUFX.dtsi"
+
+/ {
+       compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
+       model = "ZyXEL P-2812HNU-F1";
+
+       aliases {
+               led-usb = &led_usb1;
+               led-usb2 = &led_usb2;
+       };
+
+       gpio-leds {
+               led_usb1: usb1 {
+                       label = "p2812hnuf1:green:usb1";
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+               };
+               led_usb2: usb2 {
+                       label = "p2812hnuf1:green:usb2";
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&localbus {
+       nand@0 {
+               compatible = "lantiq,nand-xway";
+               lantiq,cs = <1>;
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>;
+                       };
+                       partition@40000 {
+                               label = "uboot-env";
+                               reg = <0x40000 0x20000>;
+                       };
+                       partition@60000 {
+                               label = "kernel";
+                               reg = <0x60000 0x200000>;
+                       };
+                       partition@260000 {
+                               label = "ubi";
+                               reg = <0x260000 0x7da0000>;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       wifi@1814,3062 {
+               compatible = "pci1814,3062";
+               reg = <0x7000 0 0 0 0>;
+               ralink,eeprom = "RT3062.eeprom";
+       };
+};
+
+&pcie0 {
+       status = "disabled";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2812HNUF3.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2812HNUF3.dts
new file mode 100644 (file)
index 0000000..202226a
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2812HNUF3.dts
@@ -0,0 +1,64 @@
+/dts-v1/;
+
+#include "P2812HNUFX.dtsi"
+
+/ {
+       compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
+       model = "ZyXEL P-2812HNU-F3";
+};
+
+&pci0 {
+       wifi@1814,3092 {
+               compatible = "pci1814,3092";
+               reg = <0x7000 0 0 0 0>;
+               ralink,eeprom = "RT3092.eeprom";
+       };
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x800000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x0 0x50000>;
+                               read-only;
+                       };
+                       partition@50000 {
+                               label = "uboot-env";
+                               reg = <0x50000 0x10000>;
+                       };
+                       partition@60000 {
+                               label = "unused";
+                               reg = <0x60000 0x7a0000>;
+                       };
+               };
+       };
+
+       nand@1 {
+               compatible = "lantiq,nand-xway";
+               lantiq,cs = <1>;
+               bank-width = <2>;
+               reg = <1 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "kernel";
+                       reg = <0x0 0x200000>;
+               };
+               partition@200000 {
+                       label = "ubi";
+                       reg = <0x200000 0x7e00000>;
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2812HNUFX.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2812HNUFX.dtsi
new file mode 100644 (file)
index 0000000..03858af
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/P2812HNUFX.dtsi
@@ -0,0 +1,297 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl_green;
+               led-internet = &internet_green;
+               led-wifi = &wireless_green;
+       };
+
+       memory@0 {
+               reg = <0x0 0x8000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               internet_red {
+                       label = "p2812hnufx:red:internet";
+                       gpios = <&stp 16 GPIO_ACTIVE_LOW>;
+               };
+               internet_green: internet_green {
+                       label = "p2812hnufx:green:internet";
+                       gpios = <&stp 17 GPIO_ACTIVE_LOW>;
+               };
+               dsl_green: dsl_green {
+                       label = "p2812hnufx:green:dsl";
+                       gpios = <&stp 18 GPIO_ACTIVE_LOW>;
+               };
+               dsl_orange {
+                       label = "p2812hnufx:orange:dsl";
+                       gpios = <&stp 19 GPIO_ACTIVE_LOW>;
+               };
+               wireless_orange {
+                       label = "p2812hnufx:orange:wlan";
+                       gpios = <&stp 20 GPIO_ACTIVE_LOW>;
+               };
+               wireless_green: wireless_green {
+                       label = "p2812hnufx:green:wlan";
+                       gpios = <&stp 21 GPIO_ACTIVE_LOW>;
+               };
+               power_red: power {
+                       label = "p2812hnufx:red:power";
+                       gpios = <&stp 22 GPIO_ACTIVE_LOW>;
+               };
+               power_green: power2 {
+                       label = "p2812hnufx:green:power";
+                       gpios = <&stp 23 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               phone1 {
+                       label = "p2812hnufx:green:phone";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+               };
+               phone1warn {
+                       label = "p2812hnufx:orange:phone";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+               phone2warn {
+                       label = "p2812hnufx:orange:phone2";
+                       gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+               };
+               phone2 {
+                       label = "p2812hnufx:green:phone2";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mac-address = [ 00 11 22 33 44 55 ];
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <1>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy1>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               exin3 {
+                       lantiq,groups = "exin3";
+                       lantiq,function = "exin";
+               };
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               gphy-leds {
+                       lantiq,groups = "gphy0 led1", "gphy1 led1",
+                                       "gphy0 led2", "gphy1 led2";
+                       lantiq,function = "gphy";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               stp {
+                       lantiq,groups = "stp";
+                       lantiq,function = "stp";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               pci-in {
+                       lantiq,groups = "req1";
+                       lantiq,function = "pci";
+                       lantiq,output = <0>;
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+               };
+               pci-out {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,output = <1>;
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <2>;
+               };
+               pcie-rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+               ifxhcd-rst {
+                       lantiq,pins = "io33";
+                       lantiq,pull = <0>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               nand_out {
+                       lantiq,groups = "nand cle", "nand ale";
+                       lantiq,function = "ebu";
+                       lantiq,output = <1>;
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+               nand_cs1 {
+                       lantiq,groups = "nand cs1";
+                       lantiq,function = "ebu";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&stp {
+       status = "okay";
+
+       lantiq,shadow = <0xffffff>;
+       lantiq,groups = <0x7>;
+       lantiq,dsl = <0x0>;
+       lantiq,phy1 = <0x0>;
+       lantiq,phy2 = <0x0>;
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb_phy1 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/TDW8970.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/TDW8970.dts
new file mode 100644 (file)
index 0000000..25eb3da
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/TDW8970.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "TDW89X0.dtsi"
+
+/ {
+       compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
+       model = "TP-LINK TD-W8970";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/TDW8980.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/TDW8980.dts
new file mode 100644 (file)
index 0000000..76875e7
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/TDW8980.dts
@@ -0,0 +1,33 @@
+/dts-v1/;
+
+#include "TDW89X0.dtsi"
+
+/ {
+       compatible = "tplink,tdw8980", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
+       model = "TP-LINK TD-W8980";
+
+       gpio-leds {
+               wifi2 {
+                       label = "tdw8980:green:wlan5ghz";
+                       gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio {
+       state_default: pinmux {
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,output = <1>;
+                       lantiq,open-drain;
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       lantiq,bus-clock = <33333333>;
+       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+       interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/TDW89X0.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/TDW89X0.dtsi
new file mode 100644 (file)
index 0000000..e176bca
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/TDW89X0.dtsi
@@ -0,0 +1,298 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               /* the power led can't be controlled, use the wps led instead */
+               led-boot = &wps;
+               led-failsafe = &wps;
+
+               led-dsl = &dsl;
+               led-internet = &internet;
+               led-wifi = &wifi;
+               led-usb = &led_usb0;
+               led-usb2 = &led_usb2;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RFKILL>;
+                       linux,input-type = <EV_SW>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               /*
+                       power is not controllable via gpio
+               */
+               dsl: dsl {
+                       label = "tdw89x0:green:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+               };
+               internet: internet {
+                       label = "tdw89x0:green:internet";
+                       gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_usb0: usb0 {
+                       label = "tdw89x0:green:usb";
+                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+               };
+               led_usb2: usb2 {
+                       label = "tdw89x0:green:usb2";
+                       gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+               };
+               wps: wps {
+                       label = "tdw89x0:green:wps";
+                       gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       wifi-leds {
+               compatible = "gpio-leds";
+
+               wifi: wifi {
+                       label = "tdw89x0:green:wifi";
+                       gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&ath9k_cal 0xf100>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               gphy-leds {
+                       lantiq,groups = "gphy0 led1", "gphy1 led1";
+                       lantiq,function = "gphy";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               phy-rst {
+                       lantiq,pins = "io42";
+                       lantiq,pull = <0>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               pcie-rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+       pins_spi_default: pins_spi_default {
+               spi_in {
+                       lantiq,groups = "spi_di";
+                       lantiq,function = "spi";
+               };
+               spi_out {
+                       lantiq,groups = "spi_do", "spi_clk",
+                               "spi_cs4";
+                       lantiq,function = "spi";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&pcie0 {
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+
+               ath9k: wifi@168c,002e {
+                       compatible = "pci168c,002e";
+                       reg = <0 0 0 0 0>;
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       qca,no-eeprom;
+                       qca,disable-5ghz;
+                       mtd-mac-address = <&ath9k_cal 0xf100>;
+                       mtd-mac-address-increment = <2>;
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <33250000>;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "u-boot";
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               reg = <0x20000 0x7a0000>;
+                               label = "firmware";
+                       };
+
+                       partition@7c0000 {
+                               reg = <0x7c0000 0x10000>;
+                               label = "config";
+                               read-only;
+                       };
+
+                       ath9k_cal: partition@7d0000 {
+                               reg = <0x7d0000 0x30000>;
+                               label = "boardconfig";
+                               read-only;
+                       };
+               };
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb_phy1 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VG3503J.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VG3503J.dts
new file mode 100644 (file)
index 0000000..bb001cb
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VG3503J.dts
@@ -0,0 +1,164 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
+       model = "BT OpenReach VDSL Modem";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_red: power2 {
+                       label = "vg3503j:red:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "vg3503j:green:dsl";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+               power_green: power {
+                       label = "vg3503j:green:power";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+       };
+};
+
+&eth0 {
+       interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+
+               lantiq,switch;
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                       lantiq,led1h = <0x70>;
+                       lantiq,led1l = <0x00>;
+                       lantiq,led2h = <0x00>;
+                       lantiq,led2l = <0x03>;
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                       lantiq,led1h = <0x70>;
+                       lantiq,led1l = <0x00>;
+                       lantiq,led2h = <0x00>;
+                       lantiq,led2l = <0x03>;
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               gphy-leds {
+                       lantiq,groups = "gphy0 led0", "gphy0 led1",
+                                       "gphy0 led2", "gphy1 led0",
+                                       "gphy1 led1", "gphy1 led2";
+                       lantiq,function = "gphy";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x20000>;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0x7d0000>;
+                       };
+
+                       partition@7f0000 {
+                               label = "uboot-env";
+                               reg = <0x7f0000 0x10000>;
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7510KW22.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7510KW22.dtsi
new file mode 100644 (file)
index 0000000..8f22380
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7510KW22.dtsi
@@ -0,0 +1,268 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+               led-internet = &internet_green;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               dsl: dsl {
+                       label = "vgv7510kw22:green:dsl";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+               };
+
+               internet_red {
+                       label = "vgv7510kw22:red:internet";
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+               };
+
+               info_red {
+                       label = "vgv7510kw22:red:info";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+
+               power_green: power {
+                       label = "vgv7510kw22:green:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+
+               info_green {
+                       label = "vgv7510kw22:green:info";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               internet_green: internet_green {
+                       label = "vgv7510kw22:green:internet";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi: wifi {
+                       label = "vgv7510kw22:green:wlan";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+               };
+
+               power_red: power2 {
+                       label = "vgv7510kw22:red:power";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+               };
+
+               phone {
+                       label = "vgv7510kw22:green:telefon";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 47 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&boardconfig 0x16>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy1>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <3>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy12>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy14>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+               };
+
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy12: ethernet-phy@12 {
+                       reg = <0x12>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy14: ethernet-phy@14 {
+                       reg = <0x14>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               gphy-leds {
+                       lantiq,groups = "gphy0 led0", "gphy0 led1",
+                                       "gphy1 led0", "gphy1 led1";
+                       lantiq,function = "gphy";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               pci-rst {
+                       lantiq,pins = "io21";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x1000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       boardconfig: partition@fe0000 {
+                               label = "board_config";
+                               reg = <0xfe0000 0x20000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@1814,3592 {
+               compatible = "pci1814,3592";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+               mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
+       };
+};
+
+&pcie0 {
+       status = "disabled";
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
+                        &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
+                        &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7510KW22BRN.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7510KW22BRN.dts
new file mode 100644 (file)
index 0000000..94b96d7
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7510KW22BRN.dts
@@ -0,0 +1,65 @@
+/dts-v1/;
+
+#include "VGV7510KW22.dtsi"
+
+/ {
+       compatible = "arcadyan,vgv7510kw22-brn", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
+       model = "o2 Box 6431";
+
+       sram@1f000000 {
+               cgu@103000 {
+                       lantiq,phy-clk-src = <0x2>;
+               };
+       };
+};
+
+&localbus {
+       nor@0 {
+               partitions {
+                       partition@0 {
+                               label = "Boot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "Configuration";
+                               reg = <0x40000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@80000 {
+                               label = "Certificate";
+                               reg = <0x80000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@a0000 {
+                               label = "Special_Area";
+                               reg = <0xa0000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@c0000 {
+                               compatible = "brnboot,root-selector";
+                               label = "Primary_Setting";
+                               reg = <0xc0000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@e0000 {
+                               label = "Code_Image_0";
+                               reg = <0xe0000 0x780000>;
+                               brnboot,root-id = <0x00>;
+                               read-only;
+                       };
+
+                       partition@860000 {
+                               label = "Code_Image_1";
+                               reg = <0x860000 0x780000>;
+                               brnboot,root-id = <0x01>;
+                               read-only;
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7510KW22NOR.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7510KW22NOR.dts
new file mode 100644 (file)
index 0000000..cc84c63
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7510KW22NOR.dts
@@ -0,0 +1,31 @@
+/dts-v1/;
+
+#include "VGV7510KW22.dtsi"
+
+/ {
+       compatible = "arcadyan,vgv7510kw22-nor", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
+       model = "o2 Box 6431";
+};
+
+&localbus {
+       nor@0 {
+               partitions {
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x0 0x60000>; /* 384 KiB */
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "uboot-env";
+                               reg = <0x60000 0x20000>; /* 128 KiB */
+                               read-only;
+                       };
+
+                       partition@80000 {
+                               label = "firmware";
+                               reg = <0x80000 0xf60000>; /* 15744 KiB */
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7519.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7519.dtsi
new file mode 100644 (file)
index 0000000..297f5f7
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7519.dtsi
@@ -0,0 +1,312 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &broadband_green;
+               led-internet = &internet_green;
+               led-wifi = &wireless_green;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+               eco {
+                       label = "eco";
+                       gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+               };
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               eco {
+                       label = "vgv7519:blue:eco";
+                       gpios = <&stp 2 GPIO_ACTIVE_LOW>;
+               };
+               wps_red {
+                       label = "vgv7519:red:wps";
+                       gpios = <&stp 3 GPIO_ACTIVE_LOW>;
+               };
+               wps_green {
+                       label = "vgv7519:green:wps";
+                       gpios = <&stp 4 GPIO_ACTIVE_LOW>;
+               };
+               upgrade {
+                       label = "vgv7519:blue:upgrade";
+                       gpios = <&stp 5 GPIO_ACTIVE_LOW>;
+               };
+               tv {
+                       label = "vgv7519:green:tv";
+                       gpios = <&stp 6 GPIO_ACTIVE_LOW>;
+               };
+               internet_green: internet_green {
+                       label = "vgv7519:green:internet";
+                       gpios = <&stp 7 GPIO_ACTIVE_LOW>;
+               };
+               internet_red {
+                       label = "vgv7519:red:internet";
+                       gpios = <&stp 8 GPIO_ACTIVE_LOW>;
+               };
+               broadband_red {
+                       label = "vgv7519:red:broadband";
+                       gpios = <&stp 9 GPIO_ACTIVE_LOW>;
+               };
+               broadband_green: broadband_green {
+                       label = "vgv7519:green:broadband";
+                       gpios = <&stp 10 GPIO_ACTIVE_LOW>;
+               };
+               voice {
+                       label = "vgv7519:green:voice";
+                       gpios = <&stp 11 GPIO_ACTIVE_LOW>;
+               };
+               wireless_red {
+                       label = "vgv7519:red:wireless";
+                       gpios = <&stp 12 GPIO_ACTIVE_LOW>;
+               };
+               wireless_green: wireless_green {
+                       label = "vgv7519:green:wireless";
+                       gpios = <&stp 13 GPIO_ACTIVE_LOW>;
+               };
+               power_green: power2 {
+                       label = "vgv7519:green:power";
+                       gpios = <&stp 14 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_red: power {
+                       label = "vgv7519:red:power";
+                       gpios = <&stp 15 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <1>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy1>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               stp {
+                       lantiq,groups = "stp";
+                       lantiq,function = "stp";
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+                       lantiq,pull = <0>;
+               };
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               pci-rst {
+                       lantiq,pins = "io21";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+               gphy-leds {
+                       lantiq,groups = "gphy0 led1", "gphy1 led0";
+                       lantiq,function = "gphy";
+                       lantiq,open-drain = <0>;
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       boardconfig: partition@40000 {
+                               label = "board_config";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@1814,3091 {
+               compatible = "pci1814,3091";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+               mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
+       };
+};
+
+&pcie0 {
+       status = "disabled";
+};
+
+&stp {
+       lantiq,shadow = <0xffff>;
+       lantiq,groups = <0x3>;
+       lantiq,dsl = <0x0>;
+       lantiq,phy1 = <0x0>;
+       lantiq,phy2 = <0x0>;
+       /* lantiq,rising; */
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb_phy1 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};
+
+&vmmc {
+       status = "okay";
+       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
+                &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
+                &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7519BRN.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7519BRN.dts
new file mode 100644 (file)
index 0000000..1e6a65e
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7519BRN.dts
@@ -0,0 +1,70 @@
+/dts-v1/;
+
+#include "VGV7519.dtsi"
+
+/ {
+       compatible = "arcadyan,vgv7519-brn", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
+       model = "KPN Experiabox V8";
+};
+
+&localbus {
+       nor@0 {
+               partitions {
+                       partition@0 {
+                               label = "Boot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "Certificate";
+                               reg = <0x50000 0x10000>;
+                               read-only;
+                       };
+                       partition@60000 {
+                               label = "Special_Area";
+                               reg = <0x60000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@70000 {
+                               label = " Reserve_0";
+                               reg = <0x70000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@80000 {
+                               label = "Code_Image_0";
+                               reg = <0x80000 0x780000>;
+                               brnboot,root-id = <0x00>;
+                               read-only;
+                       };
+
+                       partition@4000000 {
+                               compatible = "brnboot,root-selector";
+                               label = "Primary_Setting";
+                               reg = <0x4000000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@4010000 {
+                               label = "Configuration";
+                               reg = <0x4010000 0x60000>;
+                               read-only;
+                       };
+
+                       partition@4070000 {
+                               label = " Reserve_1";
+                               reg = <0x4070000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@4080000 {
+                               label = "Code_Image_1";
+                               reg = <0x4080000 0x780000>;
+                               brnboot,root-id = <0x01>;
+                               read-only;
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7519NOR.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7519NOR.dts
new file mode 100644 (file)
index 0000000..4bdf0bc
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VGV7519NOR.dts
@@ -0,0 +1,29 @@
+/dts-v1/;
+
+#include "VGV7519.dtsi"
+
+/ {
+       compatible = "arcadyan,vgv7519-nor", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
+       model = "KPN Experiabox V8";
+};
+
+&localbus {
+       nor@0 {
+               partitions {
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+                       partition@60000 {
+                               label = "uboot_env";
+                               reg = <0x60000 0x10000>;
+                               read-only;
+                       };
+                       partition@80000 {
+                               label = "firmware";
+                               reg = <0x80000 0xf80000>;
+                       };
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VR200v.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VR200v.dts
new file mode 100644 (file)
index 0000000..d0fcd6f
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/VR200v.dts
@@ -0,0 +1,305 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
+       model = "TP-LINK Archer VR200v";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+
+               led-dsl = &dsl;
+               led-internet = &internet;
+               led-usb = &led_usb;
+               led-usb2 = &led_usb;
+       };
+
+       memory@0 {
+               reg = <0x0 0x7f00000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RFKILL>;
+                       linux,input-type = <EV_SW>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               dect_paging {
+                       label = "dect_paging";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_PHONE>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power: power {
+                       label = "vr200v:blue:power";
+                       gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "vr200v:blue:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               internet: internet {
+                       label = "vr200v:blue:internet";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               led_usb: usb {
+                       label = "vr200v:blue:usb";
+                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+               };
+               eth {
+                       label = "vr200v:blue:lan";
+                       gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+               };
+               wlan {
+                       label = "vr200v:blue:wlan";
+                       gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+               };
+               wlan5g {
+                       label = "vr200v:blue:wlan5g";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+               };
+               phone {
+                       label = "vr200v:blue:phone";
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&romfile 0xf100>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               gphy-leds {
+                       lantiq,groups = "gphy0 led1", "gphy1 led1";
+                       lantiq,function = "gphy";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               phy-rst {
+                       lantiq,pins = "io42";
+                       lantiq,pull = <0>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               pcie-rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+       pins_spi_default: pins_spi_default {
+               spi_in {
+                       lantiq,groups = "spi_di";
+                       lantiq,function = "spi";
+               };
+               spi_out {
+                       lantiq,groups = "spi_do", "spi_clk",
+                               "spi_cs4";
+                       lantiq,function = "spi";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&spi {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <33250000>;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "u-boot";
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               reg = <0x20000 0xf90000>;
+                               label = "firmware";
+                       };
+
+                       partition@fb0000 {
+                               reg = <0xfb0000 0x10000>;
+                               label = "radioDECT";
+                               read-only;
+                       };
+
+                       partition@fc0000 {
+                               reg = <0xfc0000 0x10000>;
+                               label = "config";
+                               read-only;
+                       };
+
+                       romfile: partition@fd0000 {
+                               reg = <0xfd0000 0x10000>;
+                               label = "romfile";
+                               read-only;
+                       };
+
+                       partition@fe0000 {
+                               reg = <0xfe0000 0x10000>;
+                               label = "rom";
+                               read-only;
+                       };
+
+                       partition@ff0000 {
+                               reg = <0xff0000 0x10000>;
+                               label = "radio";
+                               read-only;
+                       };
+               };
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb_phy1 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/WBMR.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/WBMR.dts
new file mode 100644 (file)
index 0000000..6bee330
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/WBMR.dts
@@ -0,0 +1,199 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9";
+       model = "Buffalo WBMR-HP-G300H";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+               led-internet = &online_green;
+               led-usb = &led_usb;
+               led-wifi = &wifi;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+               eject {
+                       label = "eject";
+                       gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_EJECTCD>;
+               };
+               movie {
+                       label = "movie";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VIDEO>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_green: power {
+                       label = "wbmr:green:power";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               power_red: power2 {
+                       label = "wbmr:red:power";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               security {
+                       label = "wbmr:yellow:security";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+               wifi: wifi {
+                       label = "wbmr:green:wireless";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+               dsl: dsl {
+                       label = "wbmr:green:dsl";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               };
+               online_green: online {
+                       label = "wbmr:green:internet";
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               };
+               online2 {
+                       label = "wbmr:red:internet";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+               };
+               movie {
+                       label = "wbmr:blue:movie";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+               };
+               led_usb: usb {
+                       label = "wbmr:green:usb";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               pci-in {
+                       lantiq,groups = "req1";
+                       lantiq,output = <0>;
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+               };
+               pci-out {
+                       lantiq,groups = "gnt1";
+                       lantiq,output = <1>;
+                       lantiq,pull = <0>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "rgmii";
+       mtd-mac-address = <&boardconfig 0x10024>;
+};
+
+&pci0 {
+       status = "okay";
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x2000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "uboot_env";
+                               reg = <0x40000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x60000 0x1f20000>;
+                       };
+
+                       boardconfig: partition@1fc0000 {
+                               label = "board";
+                               reg = <0x1fc0000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@1fe0000 {
+                               label = "calibration";
+                               reg = <0x1fe0000 0x20000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/WBMR300.dts b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/WBMR300.dts
new file mode 100644 (file)
index 0000000..4092b6b
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/WBMR300.dts
@@ -0,0 +1,329 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
+       model = "Buffalo WBMR-300HPD";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_g;
+               led-failsafe = &diag_r;
+               led-running = &power_g;
+
+               led-dsl = &dsl;
+               led-internet = &router_g;
+               led-wifi = &wifi_g;
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio_poweroff {
+               compatible = "gpio-poweroff";
+               gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               power {
+                       label = "power";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_POWER>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               auto {
+                       label = "auto";
+                       gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
+               };
+
+               router {
+                       label = "router";
+                       gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+                       linux,code = <BTN_1>;
+                       linux,input-type = <EV_SW>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               diag_r: diag_r {
+                       label = "wbmr300:red:diag";
+                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+                       default_state = "off";
+               };
+
+               wifi_g: wifi_g {
+                       label = "wbmr300:green:wifi";
+                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+               };
+
+               dsl: dsl {
+                       label = "dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+               };
+
+               router_y: router_y {
+                       label = "wbmr300:yellow:router";
+                       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+               };
+
+               wifi_y: wifi_y {
+                       label = "wbmr300:yellow:wifi";
+                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+               };
+
+               lan1: lan1 {
+                       label = "wbmr300:green:lan1";
+                       gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+               };
+
+               wan: wan {
+                       label = "wbmr300:green:wan";
+                       gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+               };
+
+               lan3: lan3 {
+                       label = "wbmr300:green:lan3";
+                       gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+               };
+
+               lan2: lan2 {
+                       label = "wbmr300:green:lan2";
+                       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               };
+
+               internet_g: internet_g {
+                       label = "wbmr300:green:internet";
+                       gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
+               };
+
+               internet_y: internet_y {
+                       label = "wbmr300:yellow:internet";
+                       gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+               };
+
+               router_g: router_g {
+                       label = "wbmr300:green:router";
+                       gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+               };
+
+               power_g: power_g {
+                       label = "wbmr300:green:power";
+                       gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               lantiq,switch;
+
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy14>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <3>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy12>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy12: ethernet-phy@12 {
+                       reg = <0x12>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy14: ethernet-phy@14 {
+                       reg = <0x14>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               phy-rst {
+                       lantiq,pins = "io42";
+                       lantiq,pull = <0>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               pcie-rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+       pins_spi_default: pins_spi_default {
+               spi_in {
+                       lantiq,groups = "spi_di";
+                       lantiq,function = "spi";
+               };
+               spi_out {
+                       lantiq,groups = "spi_do", "spi_clk",
+                               "spi_cs4";
+                       lantiq,function = "spi";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <20000000>;
+
+               partition@0 {
+                       reg = <0x0 0x10000>;
+                       label = "u-boot";
+                       read-only;
+               };
+
+               partition@10000 {
+                       reg = <0x10000 0x10000>;
+                       label = "gphyfirmware";
+                       read-only;
+               };
+
+               partition@20000 {
+                       reg = <0x20000 0x80000>;
+                       label = "dsl_fw";
+               };
+
+               partition@de0000 {
+                       reg = <0xa0000 0xf40000>;
+                       label = "firmware";
+               };
+
+               partition@fe0000 {
+                       reg = <0xfe0000 0x10000>;
+                       label = "sysconfig";
+                       read-only;
+               };
+
+               partition@ff0000 {
+                       reg = <0xff0000 0x2000>;
+                       label = "ubootconfig";
+               };
+
+               partition@ff3000 {
+                       reg = <0xff3000 0x2000>;
+                       label = "board_config";
+                       read-only;
+               };
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb_phy1 {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/amazonse.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/amazonse.dtsi
new file mode 100644 (file)
index 0000000..f216adf
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/amazonse.dtsi
@@ -0,0 +1,204 @@
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "lantiq,xway", "lantiq,ase";
+
+       aliases {
+               serial0 = &asc1;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips4Kc";
+               };
+       };
+
+       memory@0 {
+               device_type = "memory";
+       };
+
+       biu@1f800000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,biu", "simple-bus";
+               reg = <0x1f800000 0x800000>;
+               ranges = <0x0 0x1f800000 0x7fffff>;
+
+               icu0: icu@80200 {
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       compatible = "lantiq,icu";
+                       reg = <0x80200 0x28
+                               0x80228 0x28
+                               0x80250 0x28
+                               0x80278 0x28
+                               0x802a0 0x28>;
+               };
+
+               watchdog@803f0 {
+                       compatible = "lantiq,wdt";
+                       reg = <0x803f0 0x10>;
+               };
+       };
+
+       sram@1f000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,sram", "simple-bus";
+               reg = <0x1f000000 0x800000>;
+               ranges = <0x0 0x1f000000 0x7fffff>;
+
+               eiu0: eiu@101000 {
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       compatible = "lantiq,eiu-xway";
+                       reg = <0x101000 0x1000>;
+                       interrupt-parent = <&icu0>;
+                       lantiq,eiu-irqs = <29 30 31>;
+               };
+
+               pmu0: pmu@102000 {
+                       compatible = "lantiq,pmu-xway";
+                       reg = <0x102000 0x1000>;
+               };
+
+               cgu0: cgu@103000 {
+                       compatible = "lantiq,cgu-xway";
+                       reg = <0x103000 0x1000>;
+                       #clock-cells = <1>;
+               };
+
+               rcu0: rcu@203000 {
+                       compatible = "lantiq,ase-rcu", "simple-mfd", "syscon";
+                       reg = <0x203000 0x1000>;
+                       ranges = <0x0 0x203000 0x100>;
+                       big-endian;
+
+                       reset: reset-controller@10 {
+                               compatible = "lantiq,danube-reset";
+                               reg = <0x10 4>, <0x14 4>;
+
+                               #reset-cells = <2>;
+                       };
+
+                       usb_phy: usb2-phy@18 {
+                               compatible = "lantiq,ase-usb2-phy";
+                               reg = <0x18 4>;
+                               status = "disabled";
+
+                               resets = <&reset 4 4>;
+                               reset-names = "ctrl";
+                               #phy-cells = <0>;
+                       };
+
+                       reboot@10 {
+                               compatible = "syscon-reboot";
+                               reg = <0x10 4>;
+
+                               regmap = <&rcu0>;
+                               offset = <0x10>;
+                               mask = <0x40000000>;
+                       };
+               };
+       };
+
+       fpi@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,fpi", "simple-bus";
+               ranges = <0x0 0x10000000 0xeefffff>;
+               reg = <0x10000000 0xef00000>;
+
+               localbus: localbus@0 {
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+                               1 0 0x4000000 0x4000010>; /* addsel1 */
+                       compatible = "lantiq,localbus", "simple-bus";
+               };
+
+               spi: spi@e100800 {
+                       compatible = "lantiq,ase-spi";
+                       reg = <0xe100800 0x100>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <24 25 26>;
+                       interrupt-names = "spi_rx", "spi_tx", "spi_err",
+                                       "spi_frm";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       status = "disabled";
+               };
+
+               gptu@e100a00 {
+                       compatible = "lantiq,gptu-xway";
+                       reg = <0xe100a00 0x100>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <33 34 35 36 37 38>;
+               };
+
+               gpio: pinmux@e100b10 {
+                       compatible = "lantiq,ase-pinctrl";
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       reg = <0xe100b10 0xa0>;
+               };
+
+               asc1: serial@e100c00 {
+                       compatible = "lantiq,asc";
+                       reg = <0xe100c00 0x400>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <72 74 75>;
+               };
+
+               mei@e116000 {
+                       compatible = "lantiq,mei-xway";
+                       interrupt-parent = <&icu0>;
+                       interrupts = <81>;
+               };
+
+               usb: usb@e101000 {
+                       compatible = "lantiq,ase-usb";
+                       reg = <0xe101000 0x1000
+                               0xe120000 0x3f000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <39>;
+                       dr_mode = "host";
+                       phys = <&usb_phy>;
+                       phy-names = "usb2-phy";
+                       status = "disabled";
+               };
+
+               dma0: dma@e104100 {
+                       compatible = "lantiq,dma-xway";
+                       reg = <0xe104100 0x800>;
+               };
+
+               ebu0: ebu@e105300 {
+                       compatible = "lantiq,ebu-xway";
+                       reg = <0xe105300 0x100>;
+               };
+
+               ppe@e234000 {
+                       compatible = "lantiq,ppe-ase";
+                       interrupt-parent = <&icu0>;
+                       interrupts = <85>;
+               };
+
+               gsw: etop@e180000 {
+                       compatible = "lantiq,etop-xway";
+                       reg = <0xe180000 0x40000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <105 109>;
+               };
+       };
+
+       adsl {
+               compatible = "lantiq,adsl-ase";
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ar9.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ar9.dtsi
new file mode 100644 (file)
index 0000000..48e0d95
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/ar9.dtsi
@@ -0,0 +1,268 @@
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "lantiq,xway", "lantiq,ar9";
+
+       aliases {
+               serial0 = &asc1;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips34K";
+               };
+       };
+
+       memory@0 {
+               device_type = "memory";
+       };
+
+       biu@1f800000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,biu", "simple-bus";
+               reg = <0x1f800000 0x800000>;
+               ranges = <0x0 0x1f800000 0x7fffff>;
+
+               icu0: icu@80200 {
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       compatible = "lantiq,icu";
+                       reg = <0x80200 0x28
+                               0x80228 0x28
+                               0x80250 0x28
+                               0x80278 0x28
+                               0x802a0 0x28>;
+               };
+
+               watchdog@803f0 {
+                       compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
+                       reg = <0x803f0 0x10>;
+
+                       regmap = <&rcu0>;
+               };
+       };
+
+       sram@1f000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,sram", "simple-bus";
+               reg = <0x1f000000 0x800000>;
+               ranges = <0x0 0x1f000000 0x7fffff>;
+
+               eiu0: eiu@101000 {
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       compatible = "lantiq,eiu-xway";
+                       reg = <0x101000 0x1000>;
+                       interrupt-parent = <&icu0>;
+                       lantiq,eiu-irqs = <166 135 66 40 41 42>;
+               };
+
+               pmu0: pmu@102000 {
+                       compatible = "lantiq,pmu-xway";
+                       reg = <0x102000 0x1000>;
+               };
+
+               cgu0: cgu@103000 {
+                       compatible = "lantiq,cgu-xway";
+                       reg = <0x103000 0x1000>;
+                       #clock-cells = <1>;
+               };
+
+               rcu0: rcu@203000 {
+                       compatible = "lantiq,xrx100-rcu", "simple-mfd", "syscon";
+                       reg = <0x203000 0x1000>;
+                       ranges = <0x0 0x203000 0x100>;
+                       big-endian;
+
+                       reset: reset-controller@10 {
+                               compatible = "lantiq,xrx100-reset", "lantiq,danube-reset";
+                               reg = <0x10 4>, <0x14 4>;
+
+                               #reset-cells = <2>;
+                       };
+
+                       usb_phy0: usb2-phy@18 {
+                               compatible = "lantiq,xrx100-usb2-phy";
+                               reg = <0x18 4>;
+                               status = "disabled";
+
+                               resets = <&reset 4 4>;
+                               reset-names = "ctrl";
+                               #phy-cells = <0>;
+                       };
+
+                       usb_phy1: usb2-phy@34 {
+                               compatible = "lantiq,xrx100-usb2-phy";
+                               reg = <0x34 4>;
+                               status = "disabled";
+
+                               resets = <&reset 28 28>;
+                               reset-names = "ctrl";
+                               #phy-cells = <0>;
+                       };
+
+                       reboot@10 {
+                               compatible = "syscon-reboot";
+                               reg = <0x10 4>;
+
+                               regmap = <&rcu0>;
+                               offset = <0x10>;
+                               mask = <0x40000000>;
+                       };
+               };
+       };
+
+       fpi@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,fpi", "simple-bus";
+               ranges = <0x0 0x10000000 0xeefffff>;
+               reg = <0x10000000 0xef00000>;
+
+               localbus: localbus@0 {
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+                               1 0 0x4000000 0x4000010>; /* addsel1 */
+                       compatible = "lantiq,localbus", "simple-bus";
+               };
+
+               gptu@e100a00 {
+                       compatible = "lantiq,gptu-xway";
+                       reg = <0xe100a00 0x100>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <126 127 128 129 130 131>;
+               };
+
+               asc0: serial@e100400 {
+                       compatible = "lantiq,asc";
+                       reg = <0xe100400 0x400>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <104 105 106>;
+                       status = "disabled";
+               };
+
+               spi: spi@e100800 {
+                       compatible = "lantiq,xrx100-spi";
+                       reg = <0xe100800 0x100>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <22 23 24>;
+                       interrupt-names = "spi_rx", "spi_tx", "spi_err",
+                                       "spi_frm";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       status = "disabled";
+               };
+
+               gpio: pinmux@e100b10 {
+                       compatible = "lantiq,xrx100-pinctrl";
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       reg = <0xe100b10 0xa0>;
+               };
+
+               stp: stp@e100bb0 {
+                       #gpio-cells = <2>;
+                       compatible = "lantiq,gpio-stp-xway";
+                       gpio-controller;
+                       reg = <0xe100bb0 0x40>;
+                       status = "disabled";
+               };
+
+               asc1: serial@e100c00 {
+                       compatible = "lantiq,asc";
+                       reg = <0xe100c00 0x400>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <112 113 114>;
+               };
+
+               usb0: usb@e101000 {
+                       compatible = "lantiq,arx100-usb";
+                       reg = <0xe101000 0x1000
+                               0xe120000 0x3f000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <62 91>;
+                       dr_mode = "host";
+                       phys = <&usb_phy0>;
+                       phy-names = "usb2-phy";
+                       status = "disabled";
+               };
+
+               usb1: usb@e106000 {
+                       compatible = "lantiq,arx100-usb";
+                       reg = <0xe106000 0x1000
+                               0xe1e0000 0x3f000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <91>;
+                       dr_mode = "host";
+                       phys = <&usb_phy1>;
+                       phy-names = "usb2-phy";
+                       status = "disabled";
+               };
+
+               deu@e103100 {
+                       compatible = "lantiq,deu-arx100";
+                       reg = <0xe103100 0xf00>;
+               };
+
+               dma0: dma@e104100 {
+                       compatible = "lantiq,dma-xway";
+                       reg = <0xe104100 0x800>;
+               };
+
+               ebu0: ebu@e105300 {
+                       compatible = "lantiq,ebu-xway";
+                       reg = <0xe105300 0x100>;
+               };
+
+               mei@e116000 {
+                       compatible = "lantiq,mei-xway";
+                       interrupt-parent = <&icu0>;
+                       interrupts = <63>;
+               };
+
+               gsw: etop@e180000 {
+                       compatible = "lantiq,etop-xway";
+                       reg = <0xe180000 0x40000
+                               0xe108000 0x200>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <73 72>;
+                       mac-address = [ 00 11 22 33 44 55 ];
+               };
+
+               ppe@e234000 {
+                       compatible = "lantiq,ppe-arx100";
+                       interrupt-parent = <&icu0>;
+                       interrupts = <96>;
+               };
+
+               pci0: pci@e105400 {
+                       status = "disabled";
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       #interrupt-cells = <1>;
+                       compatible = "lantiq,pci-xway";
+                       bus-range = <0x0 0x0>;
+                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
+                                 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
+                       reg = <0x7000000 0x8000         /* config space */
+                               0xe105400 0x400>;       /* pci bridge */
+                       lantiq,bus-clock = <33333333>;
+                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                       interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+                       req-mask = <0x1>;
+               };
+       };
+
+       adsl {
+               compatible = "lantiq,adsl-arx100";
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/danube.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/danube.dtsi
new file mode 100644 (file)
index 0000000..af4c795
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/danube.dtsi
@@ -0,0 +1,252 @@
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "lantiq,xway", "lantiq,danube";
+
+       aliases {
+               serial0 = &asc1;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips24Kc";
+               };
+       };
+
+       memory@0 {
+               device_type = "memory";
+       };
+
+       biu@1f800000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,biu", "simple-bus";
+               reg = <0x1f800000 0x800000>;
+               ranges = <0x0 0x1f800000 0x7fffff>;
+
+               icu0: icu@80200 {
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       compatible = "lantiq,icu";
+                       reg = <0x80200 0x28
+                               0x80228 0x28
+                               0x80250 0x28
+                               0x80278 0x28
+                               0x802a0 0x28>;
+               };
+
+               watchdog@803f0 {
+                       compatible = "lantiq,wdt";
+                       reg = <0x803f0 0x10>;
+               };
+       };
+
+       sram@1f000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,sram", "simple-bus";
+               reg = <0x1f000000 0x800000>;
+               ranges = <0x0 0x1f000000 0x7fffff>;
+
+               eiu0: eiu@101000 {
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       compatible = "lantiq,eiu-xway";
+                       reg = <0x101000 0x1000>;
+                       interrupt-parent = <&icu0>;
+                       lantiq,eiu-irqs = <166 135 66>;
+               };
+
+               pmu0: pmu@102000 {
+                       compatible = "lantiq,pmu-xway";
+                       reg = <0x102000 0x1000>;
+               };
+
+               cgu0: cgu@103000 {
+                       compatible = "lantiq,cgu-xway";
+                       reg = <0x103000 0x1000>;
+                       #clock-cells = <1>;
+               };
+
+               vmmc: vmmc@107000 {
+                       status = "disabled";
+                       compatible = "lantiq,vmmc-xway";
+                       reg = <0x103000 0x400>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <150 151 152 153 154 155>;
+               };
+
+               rcu0: rcu@203000 {
+                       compatible = "lantiq,danube-rcu", "simple-mfd", "syscon";
+                       reg = <0x203000 0x1000>;
+                       ranges = <0x0 0x203000 0x100>;
+                       big-endian;
+
+                       reset: reset-controller@10 {
+                               compatible = "lantiq,danube-reset";
+                               reg = <0x10 4>, <0x14 4>;
+
+                               #reset-cells = <2>;
+                       };
+
+                       usb_phy: usb2-phy@18 {
+                               compatible = "lantiq,danube-usb2-phy";
+                               reg = <0x18 4>;
+                               status = "disabled";
+
+                               resets = <&reset 4 4>;
+                               reset-names = "ctrl";
+                               #phy-cells = <0>;
+                       };
+
+                       reboot@10 {
+                               compatible = "syscon-reboot";
+                               reg = <0x10 4>;
+
+                               regmap = <&rcu0>;
+                               offset = <0x10>;
+                               mask = <0x40000000>;
+                       };
+               };
+       };
+
+       fpi@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,fpi", "simple-bus";
+               ranges = <0x0 0x10000000 0xeefffff>;
+               reg = <0x10000000 0xef00000>;
+
+               localbus: localbus@0 {
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+                               1 0 0x4000000 0x4000010>; /* addsel1 */
+                       compatible = "lantiq,localbus", "simple-bus";
+
+                       gpiomm: gpiomm@1 {
+                               compatible = "lantiq,gpio-mm";
+                               reg = <1 0x0 0x10 >;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               status = "disabled";
+                       };
+               };
+
+               gptu@e100a00 {
+                       compatible = "lantiq,gptu-xway";
+                       reg = <0xe100a00 0x100>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <126 127 128 129 130 131>;
+               };
+
+               gpios: stp@e100bb0 {
+                       #gpio-cells = <2>;
+                       compatible = "lantiq,gpio-stp-xway";
+                       gpio-controller;
+                       reg = <0xe100bb0 0x40>;
+                       lantiq,shadow = <0xfff>;
+                       lantiq,groups = <0x3>;
+                       status = "disabled";
+               };
+
+               asc0: serial@e100400 {
+                       compatible = "lantiq,asc";
+                       reg = <0xe100400 0x400>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <104 105 106>;
+                       status = "disabled";
+               };
+
+               gpio: pinmux@e100b10 {
+                       compatible = "lantiq,danube-pinctrl";
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       reg = <0xe100b10 0xa0>;
+               };
+
+               asc1: serial@e100c00 {
+                       compatible = "lantiq,asc";
+                       reg = <0xe100c00 0x400>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <112 113 114>;
+               };
+
+               usb: usb@e101000 {
+                       compatible = "lantiq,danube-usb";
+                       reg = <0xe101000 0x1000
+                               0xe120000 0x3f000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <62>;
+                       dr_mode = "host";
+                       phys = <&usb_phy>;
+                       phy-names = "usb2-phy";
+                       status = "disabled";
+               };
+
+               deu@e103100 {
+                       compatible = "lantiq,deu-danube";
+                       reg = <0xe103100 0xf00>;
+               };
+
+               dma0: dma@e104100 {
+                       compatible = "lantiq,dma-xway";
+                       reg = <0xe104100 0x800>;
+               };
+
+               ebu0: ebu@e105300 {
+                       compatible = "lantiq,ebu-xway";
+                       reg = <0xe105300 0x100>;
+               };
+
+               mei@e116000 {
+                       compatible = "lantiq,mei-xway";
+                       interrupt-parent = <&icu0>;
+                       interrupts = <63>;
+               };
+
+               gsw: etop@e180000 {
+                       compatible = "lantiq,etop-xway";
+                       reg = <0xe180000 0x40000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <73 78>;
+                       mac-address = [ 00 11 22 33 44 55 ];
+               };
+
+               ppe@e234000 {
+                       compatible = "lantiq,ppe-danube";
+                       interrupt-parent = <&icu0>;
+                       interrupts = <96>;
+               };
+
+               pci0: pci@e105400 {
+                       status = "disabled";
+
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       #interrupt-cells = <1>;
+                       compatible = "lantiq,pci-xway";
+                       bus-range = <0x0 0x0>;
+                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
+                                 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
+                       reg = <0x7000000 0x8000         /* config space */
+                               0xe105400 0x400>;       /* pci bridge */
+                       lantiq,bus-clock = <33333333>;
+                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                       interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
+                       req-mask = <0x1>; /* GNT1 */
+               };
+       };
+
+       adsl {
+               compatible = "lantiq,adsl-danube";
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/falcon-sflash-16M.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/falcon-sflash-16M.dtsi
new file mode 100644 (file)
index 0000000..d95acc2
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/falcon-sflash-16M.dtsi
@@ -0,0 +1,37 @@
+
+&ebu_cs0 {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "lantiq,sflash-falcon", "simple-bus";
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "spansion,s25fl129p0", "spansion,s25fl129p1";
+               reg = <0 0>;
+               linux,mtd-name = "sflash";
+               spi-max-frequency = <80000000>;
+               m25p,fast-read;
+
+               partition@0 {
+                       reg = <0x0 0x40000>;
+                       label = "uboot";
+                       read-only;
+               };
+
+               partition@40000 {
+                       reg = <0x40000 0x80000>;
+                       label = "uboot_env";
+               };
+
+               partition@C0000 {
+                       reg = <0xC0000 0x740000>;
+                       label = "image0";
+               };
+
+               partition@800000 {
+                       reg = <0x800000 0x800000>;
+                       label = "image1";
+               };
+       };
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/falcon.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/falcon.dtsi
new file mode 100644 (file)
index 0000000..98f7181
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/falcon.dtsi
@@ -0,0 +1,392 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "lantiq,falcon";
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips34kc";
+               };
+       };
+
+       aliases {
+               serial0 = &serial0;
+               serial1 = &serial1;
+               gpio0 = &gpio0;
+               gpio1 = &gpio1;
+               gpio2 = &gpio2;
+               gpio3 = &gpio3;
+               gpio4 = &gpio4;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       clocks {
+               compatible = "simple-bus";
+
+               cpu_clk: cpu {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <400000000>;
+                       clock-output-names = "cpu";
+               };
+
+               io_clk: io {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+                       clock-output-names = "io";
+               };
+
+               fpi_clk: fpi {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <100000000>;
+                       clock-output-names = "fpi";
+               };
+       };
+
+       ebu_cs0: localbus@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,localbus", "simple-bus";
+               reg = <0x10000000 0x4000000>;
+               ranges = <0x0 0x10000000 0x4000000>;
+       };
+       ebu_cs1: localbus@14000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,localbus", "simple-bus";
+               reg = <0x14000000 0x4000000>;
+               ranges = <0x0 0x14000000 0x4000000>;
+       };
+
+       ebu@18000000 {
+               compatible = "lantiq,ebu-falcon";
+               reg = <0x18000000 0x100>;
+       };
+
+       sbs2@1D000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,sysb2", "simple-bus";
+               reg = <0x1D000000 0x1000000>;
+               ranges = <0x0 0x1D000000 0x1000000>;
+
+               clock_sysgpe: clock-controller@700000 {
+                       compatible = "lantiq,sysgpe-falcon";
+                       reg = <0x700000 0x100>;
+                       #clock-cells = <1>;
+               };
+
+               mps@4000 {
+                       compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100";
+                       reg = <0x4000 0x1000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <154 155>;
+                       lantiq,mbx = <&mpsmbx>;
+               };
+
+               gpio0: gpio@810000 {
+                       compatible = "lantiq,falcon-gpio";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <44>;
+                       reg = <0x810000 0x80>;
+                       clocks = <&clock_syseth 16>;
+               };
+
+               gpio2: gpio@810100 {
+                       compatible = "lantiq,falcon-gpio";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <46>;
+                       reg = <0x810100 0x80>;
+                       clocks = <&clock_syseth 17>;
+               };
+
+               clock_syseth: clock-controller@B00000 {
+                       compatible = "lantiq,syseth-falcon";
+                       reg = <0xB00000 0x100>;
+                       #clock-cells = <1>;
+               };
+
+               pad@B01000 {
+                       compatible = "lantiq,pad-falcon";
+                       reg = <0xB01000 0x100>;
+                       lantiq,bank = <0>;
+                       clocks = <&clock_syseth 20>;
+               };
+
+               pad@B02000 {
+                       compatible = "lantiq,pad-falcon";
+                       reg = <0xB02000 0x100>;
+                       lantiq,bank = <2>;
+                       clocks = <&clock_syseth 21>;
+               };
+       };
+
+       fpi@1E000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,fpi", "simple-bus";
+               reg = <0x1E000000 0x1000000>;
+               ranges = <0x0 0x1E000000 0x1000000>;
+
+               serial1: serial@100B00 {
+                       status = "disabled";
+                       compatible = "lantiq,asc";
+                       reg = <0x100B00 0x100>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <112 113 114>;
+                       line = <1>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&asc1_pins>;
+                       clocks = <&clock_sys1 11>;
+               };
+
+               serial0: serial@100C00 {
+                       compatible = "lantiq,asc";
+                       reg = <0x100C00 0x100>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <104 105 106>;
+                       line = <0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&asc0_pins>;
+                       clocks = <&clock_sys1 12>;
+               };
+
+               spi: spi@100D00 {
+                       status = "disabled";
+                       compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc";
+                       interrupts = <22 23 24 25>;
+                       interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x100D00 0x100>;
+                       interrupt-parent = <&icu0>;
+                       clocks = <&clock_sys1 13>;
+                       base_cs = <1>;
+                       num_cs = <2>;
+               };
+
+               gptc@100E00 {
+                       compatible = "lantiq,gptc-falcon";
+                       reg = <0x100E00 0x100>;
+               };
+
+               i2c: i2c@200000 {
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "lantiq,lantiq-i2c";
+                       reg = <0x200000 0x10000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <18 19 20 21>;
+                       gpios = <&gpio1 7 0 &gpio1 8 0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c_pins>;
+                       clocks = <&clock_sys1 14>;
+               };
+
+               gpio1: gpio@800100 {
+                       compatible = "lantiq,falcon-gpio";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <45>;
+                       reg = <0x800100 0x100>;
+                       clocks = <&clock_sys1 16>;
+               };
+
+               gpio3: gpio@800200 {
+                       compatible = "lantiq,falcon-gpio";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <47>;
+                       reg = <0x800200 0x100>;
+                       clocks = <&clock_sys1 17>;
+               };
+
+               gpio4: gpio@800300 {
+                       compatible = "lantiq,falcon-gpio";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <48>;
+                       reg = <0x800300 0x100>;
+                       clocks = <&clock_sys1 18>;
+               };
+
+               pad@800400 {
+                       compatible = "lantiq,pad-falcon";
+                       reg = <0x800400 0x100>;
+                       lantiq,bank = <1>;
+                       clocks = <&clock_sys1 20>;
+               };
+
+               pad@800500 {
+                       compatible = "lantiq,pad-falcon";
+                       reg = <0x800500 0x100>;
+                       lantiq,bank = <3>;
+                       clocks = <&clock_sys1 21>;
+               };
+
+               pad@800600 {
+                       compatible = "lantiq,pad-falcon";
+                       reg = <0x800600 0x100>;
+                       lantiq,bank = <4>;
+                       clocks = <&clock_sys1 22>;
+               };
+
+               status@802000 {
+                       compatible = "lantiq,status-falcon";
+                       reg = <0x802000 0x80>;
+               };
+
+               clock_sys1: clock-controller@F00000 {
+                       compatible = "lantiq,sys1-falcon";
+                       reg = <0xF00000 0x100>;
+                       #clock-cells = <1>;
+               };
+       };
+
+       sbs0@1F000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "simple-bus";
+               reg = <0x1F000000 0x400000>;
+               ranges = <0x0 0x1F000000 0x400000>;
+
+               mpsmbx: mpsmbx@200000 {
+                       reg = <0x200000 0x200>;
+               };
+       };
+
+       sbs1@1F700000 {
+
+       };
+
+       biu@1F800000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,biu", "simple-bus";
+               reg = <0x1F800000 0x800000>;
+               ranges = <0x0 0x1F800000 0x800000>;
+
+               icu0: icu@80200 {
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       compatible = "lantiq,icu";
+                       reg = <0x80200 0x28
+                               0x80228 0x28
+                               0x80250 0x28
+                               0x80278 0x28
+                               0x802a0 0x28>;
+               };
+
+               watchdog@803F0 {
+                       compatible = "lantiq,wdt";
+                       reg = <0x803F0 0x10>;
+                       clocks = <&io_clk>; /* currently no effect */
+               };
+       };
+
+       pinctrl {
+               compatible = "lantiq,pinctrl-falcon";
+               pinctrl-names = "default";
+               pinctrl-0 = <&state_default>;
+
+               state_default: pinctrl0 {
+                       /*ntr {
+                               lantiq,groups = "ntr8k";
+                               lantiq,function = "ntr";
+                       };*/
+                       hrst {
+                               lantiq,groups = "hrst";
+                               lantiq,function = "rst";
+                       };
+               };
+
+               asc0_pins: asc0 {
+                       asc0 {
+                               lantiq,groups = "asc0";
+                               lantiq,function = "asc";
+                       };
+               };
+               asc1_pins: asc1 {
+                       asc1 {
+                               lantiq,groups = "asc1";
+                               lantiq,function = "asc";
+                       };
+               };
+               i2c_pins: i2c {
+                       i2c {
+                               lantiq,groups = "i2c";
+                               lantiq,function = "i2c";
+                       };
+               };
+               bootled_pins: bootled {
+                       bootled {
+                               lantiq,groups = "bootled";
+                               lantiq,function = "led";
+                       };
+               };
+               ntr_ntr8k: ntr8k {
+                       ntr8k {
+                               lantiq,groups = "ntr8k";
+                               lantiq,function = "ntr";
+                       };
+               };
+               ntr_pps: pps {
+                       pps {
+                               lantiq,groups = "pps";
+                               lantiq,function = "ntr";
+                       };
+               };
+               ntr_gpio: gpio {
+                       gpio {
+                               lantiq,pins = "io5";
+                               lantiq,mux = <1>;
+                               lantiq,output = <0>;
+                       };
+               };
+               slic_pins: slic {
+                       slic {
+                               lantiq,groups = "slic";
+                               lantiq,function = "slic";
+                       };
+               };
+       };
+
+       pinselect-ntr {
+               compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr";
+               pinctrl-names = "ntr8k", "pps", "gpio";
+               pinctrl-0 = <&ntr_ntr8k>;
+               pinctrl-1 = <&ntr_pps>;
+               pinctrl-2 = <&ntr_gpio>;
+       };
+
+       pinselect-asc1 {
+               compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1";
+               pinctrl-names = "default", "asc1";
+               pinctrl-0 = <&slic_pins>;
+               pinctrl-1 = <&asc1_pins>;
+       };
+
+};

diff --git a/target/linux/lantiq/files-4.17/arch/mips/boot/dts/vr9.dtsi b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/vr9.dtsi
new file mode 100644 (file)
index 0000000..036dbf0
--- /dev/null
+++ b/target/linux/lantiq/files-4.17/arch/mips/boot/dts/vr9.dtsi
@@ -0,0 +1,349 @@
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "lantiq,xway", "lantiq,vr9";
+
+       aliases {
+               serial0 = &asc1;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips34Kc";
+               };
+       };
+
+       memory@0 {
+               device_type = "memory";
+       };
+
+       cputemp@0 {
+               compatible = "lantiq,cputemp";
+       };
+
+       biu@1f800000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,biu", "simple-bus";
+               reg = <0x1f800000 0x800000>;
+               ranges = <0x0 0x1f800000 0x7fffff>;
+
+               icu0: icu@80200 {
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       compatible = "lantiq,icu";
+                       reg = <0x80200 0x28
+                               0x80228 0x28
+                               0x80250 0x28
+                               0x80278 0x28
+                               0x802a0 0x28>;
+               };
+
+               watchdog@803f0 {
+                       compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
+                       reg = <0x803f0 0x10>;
+
+                       regmap = <&rcu0>;
+               };
+       };
+
+       sram@1f000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,sram", "simple-bus";
+               reg = <0x1f000000 0x800000>;
+               ranges = <0x0 0x1f000000 0x7fffff>;
+
+               eiu0: eiu@101000 {
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       compatible = "lantiq,eiu-xway";
+                       reg = <0x101000 0x1000>;
+                       interrupt-parent = <&icu0>;
+                       lantiq,eiu-irqs = <166 135 66 40 41 42>;
+               };
+
+               pmu0: pmu@102000 {
+                       compatible = "lantiq,pmu-xway";
+                       reg = <0x102000 0x1000>;
+               };
+
+               cgu0: cgu@103000 {
+                       compatible = "lantiq,cgu-xway";
+                       reg = <0x103000 0x1000>;
+               };
+
+               dcdc@106a00 {
+                       compatible = "lantiq,dcdc-xrx200";
+                       reg = <0x106a00 0x200>;
+               };
+
+               vmmc: vmmc@103000 {
+                       status = "disabled";
+                       compatible = "lantiq,vmmc-xway";
+                       reg = <0x103000 0x400>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <150 151 152 153 154 155>;
+               };
+
+               rcu0: rcu@203000 {
+                       compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
+                       reg = <0x203000 0x100>;
+                       ranges = <0x0 0x203000 0x100>;
+                       big-endian;
+
+                       gphy0: gphy@20 {
+                               compatible = "lantiq,xrx200-gphy";
+                               reg = <0x20 0x4>;
+
+                               resets = <&reset0 31 30>, <&reset1 7 7>;
+                               reset-names = "gphy", "gphy2";
+                       };
+
+                       gphy1: gphy@68 {
+                               compatible = "lantiq,xrx200-gphy";
+                               reg = <0x68 0x4>;
+
+                               resets = <&reset0 29 28>, <&reset1 6 6>;
+                               reset-names = "gphy", "gphy2";
+                       };
+
+                       reset0: reset-controller@10 {
+                               compatible = "lantiq,xrx200-reset";
+                               reg = <0x10 4>, <0x14 4>;
+
+                               #reset-cells = <2>;
+                       };
+
+                       reset1: reset-controller@48 {
+                               compatible = "lantiq,xrx200-reset";
+                               reg = <0x48 4>, <0x24 4>;
+
+                               #reset-cells = <2>;
+                       };
+
+                       usb_phy0: usb2-phy@18 {
+                               compatible = "lantiq,xrx200-usb2-phy";
+                               reg = <0x18 4>, <0x38 4>;
+                               status = "disabled";
+
+                               resets = <&reset1 4 4>, <&reset0 4 4>;
+                               reset-names = "phy", "ctrl";
+                               #phy-cells = <0>;
+                       };
+
+                       usb_phy1: usb2-phy@34 {
+                               compatible = "lantiq,xrx200-usb2-phy";
+                               reg = <0x34 4>, <0x3c 4>;
+                               status = "disabled";
+
+                               resets = <&reset1 5 4>, <&reset0 4 4>;
+                               reset-names = "phy", "ctrl";
+                               #phy-cells = <0>;
+                       };
+
+                       reboot@10 {
+                               compatible = "syscon-reboot";
+                               reg = <0x10 4>;
+
+                               regmap = <&rcu0>;
+                               offset = <0x10>;
+                               mask = <0x40000000>;
+                       };
+               };
+       };
+
+       fpi@10000000 {
+               compatible = "lantiq,xrx200-fpi", "simple-bus";
+               ranges = <0x0 0x10000000 0xf000000>;
+               reg =   <0x1f400000 0x1000>,
+                       <0x10000000 0xf000000>;
+               regmap = <&rcu0>;
+               offset-endianness = <0x4c>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               localbus: localbus@0 {
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+                               1 0 0x4000000 0x4000010>; /* addsel1 */
+                       compatible = "lantiq,localbus", "simple-bus";
+               };
+
+               gptu@e100a00 {
+                       compatible = "lantiq,gptu-xway";
+                       reg = <0xe100a00 0x100>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <126 127 128 129 130 131>;
+               };
+
+               usif: usif@da00000 {
+                       compatible = "lantiq,usif";
+                       reg = <0xda00000 0x1000000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <29 125 107 108 109 110>;
+                       status = "disabled";
+               };
+
+               spi: spi@e100800 {
+                       compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
+                       reg = <0xe100800 0x100>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <22 23 24>;
+                       interrupt-names = "spi_rx", "spi_tx", "spi_err",
+                                       "spi_frm";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       status = "disabled";
+               };
+
+               gpio: pinmux@e100b10 {
+                       compatible = "lantiq,xrx200-pinctrl";
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       reg = <0xe100b10 0xa0>;
+               };
+
+               stp: stp@e100bb0 {
+                       status = "disabled";
+                       compatible = "lantiq,gpio-stp-xway";
+                       reg = <0xe100bb0 0x40>;
+                       #gpio-cells = <2>;
+                       gpio-controller;
+
+                       lantiq,shadow = <0xffffff>;
+                       lantiq,groups = <0x7>;
+                       lantiq,dsl = <0x0>;
+                       lantiq,phy1 = <0x0>;
+                       lantiq,phy2 = <0x0>;
+               };
+
+               asc1: serial@e100c00 {
+                       compatible = "lantiq,asc";
+                       reg = <0xe100c00 0x400>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <112 113 114>;
+               };
+
+               deu@e103100 {
+                       compatible = "lantiq,deu-xrx200";
+                       reg = <0xe103100 0xf00>;
+               };
+
+               dma0: dma@e104100 {
+                       compatible = "lantiq,dma-xway";
+                       reg = <0xe104100 0x800>;
+               };
+
+               ebu0: ebu@e105300 {
+                       compatible = "lantiq,ebu-xway";
+                       reg = <0xe105300 0x100>;
+               };
+
+               usb0: usb@e101000 {
+                       status = "disabled";
+                       compatible = "lantiq,xrx200-usb";
+                       reg = <0xe101000 0x1000
+                               0xe120000 0x3f000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <62 91>;
+                       dr_mode = "host";
+                       phys = <&usb_phy0>;
+                       phy-names = "usb2-phy";
+               };
+
+               usb1: usb@e106000 {
+                       status = "disabled";
+                       compatible = "lantiq,xrx200-usb";
+                       reg = <0xe106000 0x1000>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <91>;
+                       dr_mode = "host";
+                       phys = <&usb_phy1>;
+                       phy-names = "usb2-phy";
+               };
+
+               eth0: eth@E10B308 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "lantiq,xrx200-net";
+                       reg = < 0xE10B308 0x30 /* pmac */
+                       >;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <75 73 72>;
+                       resets = <&reset0 21 16>, <&reset0 8 8>, <&reset0 3 3>;
+                       reset-names = "switch", "ppe", "ppe_dsp";
+                       lantiq,phys = <&gphy0>, <&gphy1>;
+               };
+
+               gswip: gswip@E108000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "lantiq,xrx200-gswip";
+                       reg = < 0xE108000 0x3000 /* switch */
+                               0xE10B100 0x70 /* mdio */
+                               0xE10B1D8 0x30 /* mii */
+                               >;
+                       resets = <&reset0 21 16>, <&reset0 8 8>, <&reset0 3 3>;
+                       reset-names = "switch", "ppe", "ppe_dsp";
+                       lantiq,phys = <&gphy0>, <&gphy1>;
+               };
+
+               mei@e116000 {
+                       compatible = "lantiq,mei-xrx200";
+                       reg = <0xe116000 0x9c>;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <63>;
+               };
+
+               ppe@e234000 {
+                       compatible = "lantiq,ppe-xrx200";
+                       interrupt-parent = <&icu0>;
+                       interrupts = <96>;
+               };
+
+               pcie0: pcie@d900000 {
+                       compatible = "lantiq,pcie-xrx200";
+
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+
+                       interrupt-parent = <&icu0>;
+                       interrupts = <161 144>;
+
+                       device_type = "pci";
+
+                       gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
+               };
+
+               pci0: pci@e105400 {
+                       status = "disabled";
+
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       #interrupt-cells = <1>;
+                       compatible = "lantiq,pci-xway";
+                       bus-range = <0x0 0x0>;
+                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
+                               0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
+                       reg = <0x7000000 0x8000         /* config space */
+                               0xe105400 0x400>;       /* pci bridge */
+                       lantiq,bus-clock = <33333333>;
+                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                       interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
+                       req-mask = <0x1>; /* GNT1 */
+               };
+       };
+
+       vdsl {
+               compatible = "lantiq,vdsl-vrx200";
+       };
+};

diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index b1eca2df531e9d5c7b6878d413f02b70ddd9c015..9832627bee29ca03180418ba7b4281b6c6e600f4 100644 (file)
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -60,7 +60,7 @@ define Device/Default
   KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
   KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
   FILESYSTEMS := squashfs
-  DEVICE_DTS_DIR := ../files-4.16/arch/mips/boot/dts/
+  DEVICE_DTS_DIR := ../files-4.17/arch/mips/boot/dts/
   IMAGE_SIZE :=
   SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
   IMAGES := sysupgrade.bin

diff --git a/target/linux/lantiq/xrx200/config-4.16 b/target/linux/lantiq/xrx200/config-4.16
deleted file mode 100644 (file)
index 70102b1..0000000
--- a/target/linux/lantiq/xrx200/config-4.16
+++ /dev/null
@@ -1,86 +0,0 @@
-CONFIG_AT803X_PHY=y
-CONFIG_BLK_MQ_PCI=y
-# CONFIG_CPU_ISOLATION is not set
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
-CONFIG_EXTRA_FIRMWARE_DIR="firmware"
-# CONFIG_GPIO_PCIE_IDIO_24 is not set
-CONFIG_HWMON=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INTEL_XWAY_PHY=y
-# CONFIG_ISDN is not set
-CONFIG_LANTIQ_XRX200=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MIPS_MT=y
-# CONFIG_MIPS_MT_FPAFF is not set
-CONFIG_MIPS_MT_SMP=y
-CONFIG_MIPS_NR_CPU_NR_MAP=2
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
-CONFIG_MIPS_VPE_APSP_API=y
-CONFIG_MIPS_VPE_APSP_API_MT=y
-CONFIG_MIPS_VPE_LOADER=y
-CONFIG_MIPS_VPE_LOADER_MT=y
-CONFIG_MIPS_VPE_LOADER_TOM=y
-# CONFIG_MISC_RTSX_PCI is not set
-# CONFIG_MISC_RTSX_USB is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_NAND_XWAY=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NR_CPUS=2
-CONFIG_PADATA=y
-CONFIG_PCI=y
-# CONFIG_PCIE_CADENCE_HOST is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LANTIQ=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SENSORS_LTQ_CPUTEMP=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_TYPEC is not set
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_XPS=y
-CONFIG_XRX200_PHY_FW=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y

diff --git a/target/linux/lantiq/xrx200/config-4.17 b/target/linux/lantiq/xrx200/config-4.17
new file mode 100644 (file)
index 0000000..70102b1
--- /dev/null
+++ b/target/linux/lantiq/xrx200/config-4.17
@@ -0,0 +1,86 @@
+CONFIG_AT803X_PHY=y
+CONFIG_BLK_MQ_PCI=y
+# CONFIG_CPU_ISOLATION is not set
+CONFIG_CPU_MIPSR2_IRQ_EI=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+# CONFIG_GPIO_PCIE_IDIO_24 is not set
+CONFIG_HWMON=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_POLLDEV=y
+CONFIG_INTEL_XWAY_PHY=y
+# CONFIG_ISDN is not set
+CONFIG_LANTIQ_XRX200=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_FPAFF is not set
+CONFIG_MIPS_MT_SMP=y
+CONFIG_MIPS_NR_CPU_NR_MAP=2
+CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
+CONFIG_MIPS_VPE_APSP_API=y
+CONFIG_MIPS_VPE_APSP_API_MT=y
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_MT=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+# CONFIG_MISC_RTSX_PCI is not set
+# CONFIG_MISC_RTSX_USB is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_NAND_XWAY=y
+# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NR_CPUS=2
+CONFIG_PADATA=y
+CONFIG_PCI=y
+# CONFIG_PCIE_CADENCE_HOST is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LANTIQ=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_SENSORS_LTQ_CPUTEMP=y
+CONFIG_SMP=y
+CONFIG_SMP_UP=y
+CONFIG_SYNC_R4K=y
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+# CONFIG_TYPEC is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_XPS=y
+CONFIG_XRX200_PHY_FW=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y