ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
;;
-c20)
- ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
- set_usb_led "$boardname:blue:usb"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
- ;;
c20i)
ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
+tplink,c20-v1)
+ ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
+ set_usb_led "$boardname:blue:usb"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
+ ;;
tplink,tl-mr3420-v5)
set_usb_led "$boardname:green:usb"
set_wifi_led "$boardname:green:wlan"
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
;;
- c20|\
- c50)
+ c50|\
+ tplink,c20-v1)
ucidef_add_switch "switch0" \
"1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
;;
w502u)
status_led="$boardname:blue:wps"
;;
- c20|\
d240|\
dap-1350|\
na930|\
rt-n14u|\
rt-n15|\
rt-n56u|\
+ tplink,c20-v1|\
wl-330n|\
wl-330n3g|\
wli-tx4-ag300n|\
*"C108")
name="c108"
;;
- *"C20")
- name="c20"
- ;;
*"C20i")
name="c20i"
;;
}
return 0
;;
- c20|\
c20i|\
c50|\
mr200|\
+ tplink,c20-v1|\
tplink,tl-mr3420-v5|\
tl-wr840n-v4|\
tl-wr840n-v5|\
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "tplink,c20", "ralink,mt7620a-soc";
- model = "TP-Link Archer C20";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- lan {
- label = "c20:blue:lan";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- };
-
- power {
- label = "c20:blue:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- usb {
- label = "c20:blue:usb";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "c20:blue:wan";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
-
- wan_orange {
- label = "c20:orange:wan";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g {
- label = "c20:blue:wlan5g";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "c20:blue:wlan2g";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "c20:blue:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- }; };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- read-only;
- };
-
- rom: partition@7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- read-only;
- };
-
- partition@7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- radio: partition@7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- mtd-mac-address = <&rom 0xf100>;
- mediatek,portmap = "wllll";
- };
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&radio 0>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-2)>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
-
-&pcie {
- status = "okay";
-
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&radio 32768>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-1)>;
- };
- };
-};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "tplink,c20-v1", "ralink,mt7620a-soc";
+ model = "TP-Link Archer C20 v1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "c20-v1:blue:lan";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "c20-v1:blue:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ usb {
+ label = "c20-v1:blue:usb";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "c20-v1:blue:wan";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_orange {
+ label = "c20-v1:orange:wan";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g {
+ label = "c20-v1:blue:wlan5g";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "c20-v1:blue:wlan2g";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "c20-v1:blue:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x7a0000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ read-only;
+ };
+
+ rom: partition@7d0000 {
+ label = "rom";
+ reg = <0x7d0000 0x10000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "romfile";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ radio: partition@7f0000 {
+ label = "radio";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ mtd-mac-address = <&rom 0xf100>;
+ mediatek,portmap = "wllll";
+ };
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&radio 0>;
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-2)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&radio 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
+ };
+ };
+};
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata
endef
-define Device/ArcherC20
- $(Device/Archer)
- DTS := ArcherC20
- SUPPORTED_DEVICES := c20
- TPLINK_FLASHLAYOUT := 8Mmtk
- TPLINK_HWID := 0xc2000001
- TPLINK_HWREV := 0x44
- TPLINK_HWREVADD := 0x1
- IMAGES += factory.bin
- DEVICE_TITLE := TP-Link ArcherC20
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += ArcherC20
-
define Device/ArcherC20i
$(Device/Archer)
DTS := ArcherC20i
endef
TARGET_DEVICES += tiny-ac
+define Device/tplink_c20-v1
+ $(Device/Archer)
+ DTS := ArcherC20v1
+ SUPPORTED_DEVICES := c20v1
+ TPLINK_FLASHLAYOUT := 8Mmtk
+ TPLINK_HWID := 0xc2000001
+ TPLINK_HWREV := 0x44
+ TPLINK_HWREVADD := 0x1
+ IMAGES += factory.bin
+ DEVICE_TITLE := TP-Link ArcherC20 v1
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += tplink_c20-v1
+
define Device/vonets_var11n-300
DTS := VAR11N-300
IMAGE_SIZE := $(ralink_default_fw_size_4M)