ath79: add support for 8Devices Carambola3 board

Carambola3 is a WiFi module based on Qualcomm/Atheros QCA4531
http://wiki.8devices.com/carambola3

Specification:

    - 650/600/216 MHz (CPU/DDR/AHB)
    - 128 MB of RAM (DDR2)
    - 32 MB of FLASH
    - 2T2R 2.4 GHz
    - 2x 10/100 Mbps Ethernet
    - 1x USB 2.0 Host socket
    - UART for serial console
    - 12x GPIO

Flash instructions:

    Upgrading from ar71xx target:
    - Upload image into the board:
        scp openwrt-ath79-generic-8dev_carambola3-squashfs-sysupgrade.bin \
          root@192.168.1.1/tmp/
    - Run sysupgrade
        sysupgrade -F /tmp/openwrt-ath79-generic-8dev_carambola3-squashfs-sysupgrade.bin

Upgrading from u-boot:
    - Set up tftp server with openwrt-ath79-generic-8dev_carambola3-initramfs-kernel.bin
    - Go to u-boot (reboot and press ESC when prompted)
    - Set TFTP server IP
        setenv serverip 192.168.1.254
    - Set device ip from the same subnet
        setenv ipaddr 192.168.1.1
    - Copy new firmware to board
        tftpboot 0x82000000 initramfs.bin
    - Boot OpenWRT
        bootm 0x82000000
    - Upload image openwrt-ath79-generic-8dev_carambola3-squashfs-sysupgrade.bin into the board
    - Run sysupgrade.

Signed-off-by: Andrey Bondar <a.bondar@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/15514
Signed-off-by: Robert Marko <robimarko@gmail.com>

diff --git a/target/linux/ath79/dts/qca9531_8dev_carambola3.dts b/target/linux/ath79/dts/qca9531_8dev_carambola3.dts
new file mode 100644 (file)
index 0000000..c019f2c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_8dev_carambola3.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       compatible = "8dev,carambola3", "qca,qca9531";
+       model = "8devices Carambola3";
+
+       aliases {
+               label-mac-device = &wmac;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               lan {
+                       label = "green:lan";
+                       function = LED_FUNCTION_LAN;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+               };
+
+               wan {
+                       label = "green:wan";
+                       function = LED_FUNCTION_WAN;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&usb0 {
+       status = "okay";
+
+       dr_mode = "host";
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&wdt {
+       status = "okay";
+};
+
+&spi {
+       status = "okay";
+
+       /* Winbond W25Q256 SPI flash */
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <45000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x040000>;
+                       };
+
+                       art: partition@80000 {
+                               label = "art";
+                               reg = <0x080000 0x040000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_art_0: macaddr@0 {
+                                               reg = <0x0 0x6>;
+                                       };
+
+                                       macaddr_art_6: macaddr@6 {
+                                               reg = <0x6 0x6>;
+                                       };
+                               };
+                       };
+
+                       partition@c0000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x0c0000 0xf40000>;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&swphy0>;
+
+       nvmem-cells = <&macaddr_art_6>;
+       nvmem-cell-names = "mac-address";
+
+       gmac-config {
+               device = <&gmac>;
+
+               switch-phy-addr-swap = <1>;
+               switch-phy-swap = <1>;
+       };
+};
+
+&eth1 {
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+};

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 18fe436dbc05d8745671edc810b9aaf32b83b979..98d1b0a7baeb55a5103fee2987942380f0316957 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -10,6 +10,10 @@ case "$board" in
        ucidef_set_led_netdev "lan" "LAN" "orange:eth0" "eth0"
        ucidef_set_led_switch "wan" "WAN" "orange:eth1" "switch0" "0x04"
        ;;
+8dev,carambola3)
+       ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link"
+       ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" "link"
+       ;;
 alcatel,hh40v)
        ucidef_set_led_netdev "lan_data" "LAN Data" "green:lan" "eth1" "tx rx"
        ucidef_set_led_netdev "lan_link" "LAN Link" "orange:lan" "eth1" "link"

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index e5f4870e6fdab6468c8196998830a77a6f708bc7..1caba6aa7c897487e5aea633cc610f834555e6d5 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -9,6 +9,7 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath9k-eeprom-ahb-18100000.wmac.bin")
        case $board in
+       8dev,carambola3|\
        8dev,lima)
                caldata_extract "art" 0x1000 0x800
                ;;

diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 90270a7a4e4be111e485f8b8ee08290d4d53f941..ca72c8c6d88cbbea991120cfd6330e8bb120f1f0 100644 (file)
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -204,6 +204,16 @@ define Device/8dev_carambola2
 endef
 TARGET_DEVICES += 8dev_carambola2
 
+define Device/8dev_carambola3
+  SOC := qca9531
+  DEVICE_VENDOR := 8devices
+  DEVICE_MODEL := Carambola3
+  DEVICE_PACKAGES := kmod-usb2
+  IMAGE_SIZE := 32768k
+  SUPPORTED_DEVICES += carambola3
+endef
+TARGET_DEVICES += 8dev_carambola3
+
 define Device/8dev_lima
   SOC := qca9531
   DEVICE_VENDOR := 8devices