--- /dev/null
+From 856e8954a0a88d1a4d2b43e9002b9249131a156f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:08 +0300
+Subject: [PATCH 01/15] net: dsa: mt7530: disable EEE abilities on failure on
+ MT7531 and MT7988
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 bits let the
+PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits determine the 1G/100 EEE
+abilities of the MAC. If MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 are
+unset, the abilities are left to be determined by PHY auto polling.
+
+The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
+made it so that the PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits are set on
+mt753x_phylink_mac_link_up(). But it did not set the MT7531_FORCE_EEE1G and
+MT7531_FORCE_EEE100 bits. Because of this, the EEE abilities will be
+determined by PHY auto polling, regardless of the result of phy_init_eee().
+
+Define these bits and add them to the MT7531_FORCE_MODE mask which is set
+in mt7531_setup_common(). With this, there won't be any EEE abilities set
+when phy_init_eee() returns a negative value.
+
+Thanks to Russell for explaining when phy_init_eee() could return a
+negative value below.
+
+Looking at phy_init_eee(), it could return a negative value when:
+
+1. phydev->drv is NULL
+2. if genphy_c45_eee_is_active() returns negative
+3. if genphy_c45_eee_is_active() returns zero, it returns -EPROTONOSUPPORT
+4. if phy_set_bits_mmd() fails (e.g. communication error with the PHY)
+
+If we then look at genphy_c45_eee_is_active(), then:
+
+genphy_c45_read_eee_adv() and genphy_c45_read_eee_lpa() propagate their
+non-zero return values, otherwise this function returns zero or positive
+integer.
+
+If we then look at genphy_c45_read_eee_adv(), then a failure of
+phy_read_mmd() would cause a negative value to be returned.
+
+Looking at genphy_c45_read_eee_lpa(), the same is true.
+
+So, it can be summarised as:
+
+- phydev->drv is NULL
+- there is a communication error accessing the PHY
+- EEE is not active
+
+otherwise, it returns zero on success.
+
+If one wishes to determine whether an error occurred vs EEE not being
+supported through negotiation for the negotiated speed, if it returns
+-EPROTONOSUPPORT in the latter case. Other error codes mean either the
+driver has been unloaded or communication error.
+
+In conclusion, determining the EEE abilities by PHY auto polling shouldn't
+result in having any EEE abilities enabled, when one of the last two
+situations in the summary happens. And it seems that if phydev->drv is
+NULL, there would be bigger problems with the device than a broken link. So
+this is not a bugfix.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.h | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -328,11 +328,15 @@ enum mt7530_vlan_port_acc_frm {
+ #define MT7531_FORCE_DPX BIT(29)
+ #define MT7531_FORCE_RX_FC BIT(28)
+ #define MT7531_FORCE_TX_FC BIT(27)
++#define MT7531_FORCE_EEE100 BIT(26)
++#define MT7531_FORCE_EEE1G BIT(25)
+ #define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
+ MT7531_FORCE_SPD | \
+ MT7531_FORCE_DPX | \
+ MT7531_FORCE_RX_FC | \
+- MT7531_FORCE_TX_FC)
++ MT7531_FORCE_TX_FC | \
++ MT7531_FORCE_EEE100 | \
++ MT7531_FORCE_EEE1G)
+ #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
+ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
+ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
--- /dev/null
+From 712ad00d2f43814c81a7abfcbc339690a05fb6a0 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:09 +0300
+Subject: [PATCH 02/15] net: dsa: mt7530: refactor MT7530_PMCR_P()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7530_PMCR_P() registers are on MT7530, MT7531, and the switch on the
+MT7988 SoC. Rename the definition for them to MT753X_PMCR_P(). Bit 15 is
+for MT7530 only. Add MT7530 prefix to the definition for bit 15.
+
+Use GENMASK and FIELD_PREP for PMCR_IFG_XMIT().
+
+Rename PMCR_TX_EN and PMCR_RX_EN to PMCR_MAC_TX_EN and PMCR_MAC_TX_EN to
+follow the naming on the "MT7621 Giga Switch Programming Guide v0.3",
+"MT7531 Reference Manual for Development Board v1.0", and "MT7988A Wi-Fi 7
+Generation Router Platform: Datasheet (Open Version) v0.1" documents.
+
+These documents show that PMCR_RX_FC_EN is at bit 5. Correct this along
+with renaming it to PMCR_FORCE_RX_FC_EN, and the same for PMCR_TX_FC_EN.
+
+Remove PMCR_SPEED_MASK which doesn't have a use.
+
+Rename the force mode definitions for MT7531 to FORCE_MODE. Add MASK at the
+end for the mask that includes all force mode definitions.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 24 ++++++++---------
+ drivers/net/dsa/mt7530.h | 58 +++++++++++++++++++++-------------------
+ 2 files changed, 42 insertions(+), 40 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -889,7 +889,7 @@ static void mt7530_setup_port5(struct ds
+ val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
+
+ /* Setup the MAC by default for the cpu port */
+- mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
++ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
+ break;
+ case P5_INTF_SEL_GMAC5:
+ /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
+@@ -2435,8 +2435,8 @@ mt7530_setup(struct dsa_switch *ds)
+ /* Clear link settings and enable force mode to force link down
+ * on all ports until they're enabled later.
+ */
+- mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
+- PMCR_FORCE_MODE, PMCR_FORCE_MODE);
++ mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
++ MT7530_FORCE_MODE, MT7530_FORCE_MODE);
+
+ /* Disable forwarding by default on all ports */
+ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
+@@ -2546,8 +2546,8 @@ mt7531_setup_common(struct dsa_switch *d
+ /* Clear link settings and enable force mode to force link down
+ * on all ports until they're enabled later.
+ */
+- mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
+- MT7531_FORCE_MODE, MT7531_FORCE_MODE);
++ mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
++ MT7531_FORCE_MODE_MASK, MT7531_FORCE_MODE_MASK);
+
+ /* Disable forwarding by default on all ports */
+ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
+@@ -2630,7 +2630,7 @@ mt7531_setup(struct dsa_switch *ds)
+
+ /* Force link down on all ports before internal reset */
+ for (i = 0; i < MT7530_NUM_PORTS; i++)
+- mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
++ mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
+
+ /* Reset the switch through internal reset */
+ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
+@@ -2872,7 +2872,7 @@ mt753x_phylink_mac_config(struct phylink
+
+ /* Are we connected to external phy */
+ if (port == 5 && dsa_is_user_port(ds, 5))
+- mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
++ mt7530_set(priv, MT753X_PMCR_P(port), PMCR_EXT_PHY);
+ }
+
+ static void mt753x_phylink_mac_link_down(struct phylink_config *config,
+@@ -2882,7 +2882,7 @@ static void mt753x_phylink_mac_link_down
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct mt7530_priv *priv = dp->ds->priv;
+
+- mt7530_clear(priv, MT7530_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
++ mt7530_clear(priv, MT753X_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
+ }
+
+ static void mt753x_phylink_mac_link_up(struct phylink_config *config,
+@@ -2896,7 +2896,7 @@ static void mt753x_phylink_mac_link_up(s
+ struct mt7530_priv *priv = dp->ds->priv;
+ u32 mcr;
+
+- mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
++ mcr = PMCR_MAC_RX_EN | PMCR_MAC_TX_EN | PMCR_FORCE_LNK;
+
+ switch (speed) {
+ case SPEED_1000:
+@@ -2911,9 +2911,9 @@ static void mt753x_phylink_mac_link_up(s
+ if (duplex == DUPLEX_FULL) {
+ mcr |= PMCR_FORCE_FDX;
+ if (tx_pause)
+- mcr |= PMCR_TX_FC_EN;
++ mcr |= PMCR_FORCE_TX_FC_EN;
+ if (rx_pause)
+- mcr |= PMCR_RX_FC_EN;
++ mcr |= PMCR_FORCE_RX_FC_EN;
+ }
+
+ if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
+@@ -2928,7 +2928,7 @@ static void mt753x_phylink_mac_link_up(s
+ }
+ }
+
+- mt7530_set(priv, MT7530_PMCR_P(dp->index), mcr);
++ mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr);
+ }
+
+ static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -304,44 +304,46 @@ enum mt7530_vlan_port_acc_frm {
+ #define G0_PORT_VID_DEF G0_PORT_VID(0)
+
+ /* Register for port MAC control register */
+-#define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100))
+-#define PMCR_IFG_XMIT(x) (((x) & 0x3) << 18)
++#define MT753X_PMCR_P(x) (0x3000 + ((x) * 0x100))
++#define PMCR_IFG_XMIT_MASK GENMASK(19, 18)
++#define PMCR_IFG_XMIT(x) FIELD_PREP(PMCR_IFG_XMIT_MASK, x)
+ #define PMCR_EXT_PHY BIT(17)
+ #define PMCR_MAC_MODE BIT(16)
+-#define PMCR_FORCE_MODE BIT(15)
+-#define PMCR_TX_EN BIT(14)
+-#define PMCR_RX_EN BIT(13)
++#define MT7530_FORCE_MODE BIT(15)
++#define PMCR_MAC_TX_EN BIT(14)
++#define PMCR_MAC_RX_EN BIT(13)
+ #define PMCR_BACKOFF_EN BIT(9)
+ #define PMCR_BACKPR_EN BIT(8)
+ #define PMCR_FORCE_EEE1G BIT(7)
+ #define PMCR_FORCE_EEE100 BIT(6)
+-#define PMCR_TX_FC_EN BIT(5)
+-#define PMCR_RX_FC_EN BIT(4)
++#define PMCR_FORCE_RX_FC_EN BIT(5)
++#define PMCR_FORCE_TX_FC_EN BIT(4)
+ #define PMCR_FORCE_SPEED_1000 BIT(3)
+ #define PMCR_FORCE_SPEED_100 BIT(2)
+ #define PMCR_FORCE_FDX BIT(1)
+ #define PMCR_FORCE_LNK BIT(0)
+-#define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \
+- PMCR_FORCE_SPEED_1000)
+-#define MT7531_FORCE_LNK BIT(31)
+-#define MT7531_FORCE_SPD BIT(30)
+-#define MT7531_FORCE_DPX BIT(29)
+-#define MT7531_FORCE_RX_FC BIT(28)
+-#define MT7531_FORCE_TX_FC BIT(27)
+-#define MT7531_FORCE_EEE100 BIT(26)
+-#define MT7531_FORCE_EEE1G BIT(25)
+-#define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
+- MT7531_FORCE_SPD | \
+- MT7531_FORCE_DPX | \
+- MT7531_FORCE_RX_FC | \
+- MT7531_FORCE_TX_FC | \
+- MT7531_FORCE_EEE100 | \
+- MT7531_FORCE_EEE1G)
+-#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
+- PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
+- PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
+- PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
+- PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
++#define MT7531_FORCE_MODE_LNK BIT(31)
++#define MT7531_FORCE_MODE_SPD BIT(30)
++#define MT7531_FORCE_MODE_DPX BIT(29)
++#define MT7531_FORCE_MODE_RX_FC BIT(28)
++#define MT7531_FORCE_MODE_TX_FC BIT(27)
++#define MT7531_FORCE_MODE_EEE100 BIT(26)
++#define MT7531_FORCE_MODE_EEE1G BIT(25)
++#define MT7531_FORCE_MODE_MASK (MT7531_FORCE_MODE_LNK | \
++ MT7531_FORCE_MODE_SPD | \
++ MT7531_FORCE_MODE_DPX | \
++ MT7531_FORCE_MODE_RX_FC | \
++ MT7531_FORCE_MODE_TX_FC | \
++ MT7531_FORCE_MODE_EEE100 | \
++ MT7531_FORCE_MODE_EEE1G)
++#define PMCR_LINK_SETTINGS_MASK (PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \
++ PMCR_FORCE_EEE1G | \
++ PMCR_FORCE_EEE100 | \
++ PMCR_FORCE_RX_FC_EN | \
++ PMCR_FORCE_TX_FC_EN | \
++ PMCR_FORCE_SPEED_1000 | \
++ PMCR_FORCE_SPEED_100 | \
++ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
+
+ #define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
+ #define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24)
--- /dev/null
+From 875ec5b67ab88e969b171e6e9ea803e3ed759614 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:10 +0300
+Subject: [PATCH 03/15] net: dsa: mt7530: rename p5_intf_sel and use only for
+ MT7530 switch
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The p5_intf_sel pointer is used to store the information of whether PHY
+muxing is used or not. PHY muxing is a feature specific to port 5 of the
+MT7530 switch. Do not use it for other switch models.
+
+Rename the pointer to p5_mode to store the mode the port is being used in.
+Rename the p5_interface_select enum to mt7530_p5_mode, the string
+representation to mt7530_p5_mode_str, and the enum elements.
+
+If PHY muxing is not detected, the default mode, GMAC5, will be used.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 62 +++++++++++++++++-----------------------
+ drivers/net/dsa/mt7530.h | 15 +++++-----
+ 2 files changed, 33 insertions(+), 44 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -850,19 +850,15 @@ mt7530_set_ageing_time(struct dsa_switch
+ return 0;
+ }
+
+-static const char *p5_intf_modes(unsigned int p5_interface)
++static const char *mt7530_p5_mode_str(unsigned int mode)
+ {
+- switch (p5_interface) {
+- case P5_DISABLED:
+- return "DISABLED";
+- case P5_INTF_SEL_PHY_P0:
+- return "PHY P0";
+- case P5_INTF_SEL_PHY_P4:
+- return "PHY P4";
+- case P5_INTF_SEL_GMAC5:
+- return "GMAC5";
++ switch (mode) {
++ case MUX_PHY_P0:
++ return "MUX PHY P0";
++ case MUX_PHY_P4:
++ return "MUX PHY P4";
+ default:
+- return "unknown";
++ return "GMAC5";
+ }
+ }
+
+@@ -879,23 +875,23 @@ static void mt7530_setup_port5(struct ds
+ val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
+ val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
+
+- switch (priv->p5_intf_sel) {
+- case P5_INTF_SEL_PHY_P0:
+- /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
++ switch (priv->p5_mode) {
++ /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
++ case MUX_PHY_P0:
+ val |= MHWTRAP_PHY0_SEL;
+ fallthrough;
+- case P5_INTF_SEL_PHY_P4:
+- /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
++
++ /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
++ case MUX_PHY_P4:
+ val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
+
+ /* Setup the MAC by default for the cpu port */
+ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
+ break;
+- case P5_INTF_SEL_GMAC5:
+- /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
+- val &= ~MHWTRAP_P5_DIS;
+- break;
++
++ /* GMAC5: P5 -> SoC MAC or external PHY */
+ default:
++ val &= ~MHWTRAP_P5_DIS;
+ break;
+ }
+
+@@ -923,8 +919,8 @@ static void mt7530_setup_port5(struct ds
+
+ mt7530_write(priv, MT7530_MHWTRAP, val);
+
+- dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
+- val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
++ dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
++ mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
+
+ mutex_unlock(&priv->reg_mutex);
+ }
+@@ -2467,13 +2463,11 @@ mt7530_setup(struct dsa_switch *ds)
+ if (ret)
+ return ret;
+
+- /* Setup port 5 */
+- if (!dsa_is_unused_port(ds, 5)) {
+- priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
+- } else {
++ /* Check for PHY muxing on port 5 */
++ if (dsa_is_unused_port(ds, 5)) {
+ /* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY.
+- * Set priv->p5_intf_sel to the appropriate value if PHY muxing
+- * is detected.
++ * Set priv->p5_mode to the appropriate value if PHY muxing is
++ * detected.
+ */
+ for_each_child_of_node(dn, mac_np) {
+ if (!of_device_is_compatible(mac_np,
+@@ -2497,17 +2491,16 @@ mt7530_setup(struct dsa_switch *ds)
+ }
+ id = of_mdio_parse_addr(ds->dev, phy_node);
+ if (id == 0)
+- priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
++ priv->p5_mode = MUX_PHY_P0;
+ if (id == 4)
+- priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
++ priv->p5_mode = MUX_PHY_P4;
+ }
+ of_node_put(mac_np);
+ of_node_put(phy_node);
+ break;
+ }
+
+- if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 ||
+- priv->p5_intf_sel == P5_INTF_SEL_PHY_P4)
++ if (priv->p5_mode == MUX_PHY_P0 || priv->p5_mode == MUX_PHY_P4)
+ mt7530_setup_port5(ds, interface);
+ }
+
+@@ -2645,9 +2638,6 @@ mt7531_setup(struct dsa_switch *ds)
+ MT7531_EXT_P_MDIO_12);
+ }
+
+- if (!dsa_is_unused_port(ds, 5))
+- priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
+-
+ mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
+ MT7531_GPIO0_INTERRUPT);
+
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -708,12 +708,11 @@ struct mt7530_port {
+ struct phylink_pcs *sgmii_pcs;
+ };
+
+-/* Port 5 interface select definitions */
+-enum p5_interface_select {
+- P5_DISABLED,
+- P5_INTF_SEL_PHY_P0,
+- P5_INTF_SEL_PHY_P4,
+- P5_INTF_SEL_GMAC5,
++/* Port 5 mode definitions of the MT7530 switch */
++enum mt7530_p5_mode {
++ GMAC5,
++ MUX_PHY_P0,
++ MUX_PHY_P4,
+ };
+
+ struct mt7530_priv;
+@@ -769,7 +768,7 @@ struct mt753x_info {
+ * @ports: Holding the state among ports
+ * @reg_mutex: The lock for protecting among process accessing
+ * registers
+- * @p5_intf_sel: Holding the current port 5 interface select
++ * @p5_mode: Holding the current mode of port 5 of the MT7530 switch
+ * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch
+ * has got SGMII
+ * @irq: IRQ number of the switch
+@@ -791,7 +790,7 @@ struct mt7530_priv {
+ const struct mt753x_info *info;
+ unsigned int id;
+ bool mcm;
+- enum p5_interface_select p5_intf_sel;
++ enum mt7530_p5_mode p5_mode;
+ bool p5_sgmii;
+ u8 mirror_rx;
+ u8 mirror_tx;
--- /dev/null
+From 83fe3df057e641cd0e88425e579d7a5a370ca430 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:11 +0300
+Subject: [PATCH 04/15] net: dsa: mt7530: rename mt753x_bpdu_port_fw enum to
+ mt753x_to_cpu_fw
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The mt753x_bpdu_port_fw enum is globally used for manipulating the process
+of deciding the forwardable ports, specifically concerning the CPU port(s).
+Therefore, rename it and the values in it to mt753x_to_cpu_fw.
+
+Change FOLLOW_MFC to SYSTEM_DEFAULT to be on par with the switch documents.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 44 ++++++++++-------------
+ drivers/net/dsa/mt7530.h | 76 ++++++++++++++++++++--------------------
+ 2 files changed, 56 insertions(+), 64 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1100,42 +1100,34 @@ mt753x_trap_frames(struct mt7530_priv *p
+ * VLAN-untagged.
+ */
+ mt7530_rmw(priv, MT753X_BPC,
+- MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
+- MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
+- MT753X_BPDU_PORT_FW_MASK,
+- MT753X_PAE_BPDU_FR |
+- MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ PAE_BPDU_FR | PAE_EG_TAG_MASK | PAE_PORT_FW_MASK |
++ BPDU_EG_TAG_MASK | BPDU_PORT_FW_MASK,
++ PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ PAE_PORT_FW(TO_CPU_FW_CPU_ONLY) |
++ BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ TO_CPU_FW_CPU_ONLY);
+
+ /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
+ * them VLAN-untagged.
+ */
+ mt7530_rmw(priv, MT753X_RGAC1,
+- MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
+- MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
+- MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
+- MT753X_R02_BPDU_FR |
+- MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_R01_BPDU_FR |
+- MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ R02_BPDU_FR | R02_EG_TAG_MASK | R02_PORT_FW_MASK |
++ R01_BPDU_FR | R01_EG_TAG_MASK | R01_PORT_FW_MASK,
++ R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ R02_PORT_FW(TO_CPU_FW_CPU_ONLY) | R01_BPDU_FR |
++ R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ TO_CPU_FW_CPU_ONLY);
+
+ /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
+ * them VLAN-untagged.
+ */
+ mt7530_rmw(priv, MT753X_RGAC2,
+- MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
+- MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
+- MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
+- MT753X_R0E_BPDU_FR |
+- MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_R03_BPDU_FR |
+- MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ R0E_BPDU_FR | R0E_EG_TAG_MASK | R0E_PORT_FW_MASK |
++ R03_BPDU_FR | R03_EG_TAG_MASK | R03_PORT_FW_MASK,
++ R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ R0E_PORT_FW(TO_CPU_FW_CPU_ONLY) | R03_BPDU_FR |
++ R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ TO_CPU_FW_CPU_ONLY);
+ }
+
+ static void
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -67,47 +67,47 @@ enum mt753x_id {
+ #define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+ MT7531_MIRROR_MASK : MIRROR_MASK)
+
+-/* Registers for BPDU and PAE frame control*/
++/* Register for BPDU and PAE frame control */
+ #define MT753X_BPC 0x24
+-#define MT753X_PAE_BPDU_FR BIT(25)
+-#define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22)
+-#define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
+-#define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16)
+-#define MT753X_PAE_PORT_FW(x) FIELD_PREP(MT753X_PAE_PORT_FW_MASK, x)
+-#define MT753X_BPDU_EG_TAG_MASK GENMASK(8, 6)
+-#define MT753X_BPDU_EG_TAG(x) FIELD_PREP(MT753X_BPDU_EG_TAG_MASK, x)
+-#define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0)
++#define PAE_BPDU_FR BIT(25)
++#define PAE_EG_TAG_MASK GENMASK(24, 22)
++#define PAE_EG_TAG(x) FIELD_PREP(PAE_EG_TAG_MASK, x)
++#define PAE_PORT_FW_MASK GENMASK(18, 16)
++#define PAE_PORT_FW(x) FIELD_PREP(PAE_PORT_FW_MASK, x)
++#define BPDU_EG_TAG_MASK GENMASK(8, 6)
++#define BPDU_EG_TAG(x) FIELD_PREP(BPDU_EG_TAG_MASK, x)
++#define BPDU_PORT_FW_MASK GENMASK(2, 0)
+
+-/* Register for :01 and :02 MAC DA frame control */
++/* Register for 01-80-C2-00-00-[01,02] MAC DA frame control */
+ #define MT753X_RGAC1 0x28
+-#define MT753X_R02_BPDU_FR BIT(25)
+-#define MT753X_R02_EG_TAG_MASK GENMASK(24, 22)
+-#define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
+-#define MT753X_R02_PORT_FW_MASK GENMASK(18, 16)
+-#define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
+-#define MT753X_R01_BPDU_FR BIT(9)
+-#define MT753X_R01_EG_TAG_MASK GENMASK(8, 6)
+-#define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
+-#define MT753X_R01_PORT_FW_MASK GENMASK(2, 0)
++#define R02_BPDU_FR BIT(25)
++#define R02_EG_TAG_MASK GENMASK(24, 22)
++#define R02_EG_TAG(x) FIELD_PREP(R02_EG_TAG_MASK, x)
++#define R02_PORT_FW_MASK GENMASK(18, 16)
++#define R02_PORT_FW(x) FIELD_PREP(R02_PORT_FW_MASK, x)
++#define R01_BPDU_FR BIT(9)
++#define R01_EG_TAG_MASK GENMASK(8, 6)
++#define R01_EG_TAG(x) FIELD_PREP(R01_EG_TAG_MASK, x)
++#define R01_PORT_FW_MASK GENMASK(2, 0)
+
+-/* Register for :03 and :0E MAC DA frame control */
++/* Register for 01-80-C2-00-00-[03,0E] MAC DA frame control */
+ #define MT753X_RGAC2 0x2c
+-#define MT753X_R0E_BPDU_FR BIT(25)
+-#define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22)
+-#define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
+-#define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16)
+-#define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
+-#define MT753X_R03_BPDU_FR BIT(9)
+-#define MT753X_R03_EG_TAG_MASK GENMASK(8, 6)
+-#define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
+-#define MT753X_R03_PORT_FW_MASK GENMASK(2, 0)
++#define R0E_BPDU_FR BIT(25)
++#define R0E_EG_TAG_MASK GENMASK(24, 22)
++#define R0E_EG_TAG(x) FIELD_PREP(R0E_EG_TAG_MASK, x)
++#define R0E_PORT_FW_MASK GENMASK(18, 16)
++#define R0E_PORT_FW(x) FIELD_PREP(R0E_PORT_FW_MASK, x)
++#define R03_BPDU_FR BIT(9)
++#define R03_EG_TAG_MASK GENMASK(8, 6)
++#define R03_EG_TAG(x) FIELD_PREP(R03_EG_TAG_MASK, x)
++#define R03_PORT_FW_MASK GENMASK(2, 0)
+
+-enum mt753x_bpdu_port_fw {
+- MT753X_BPDU_FOLLOW_MFC,
+- MT753X_BPDU_CPU_EXCLUDE = 4,
+- MT753X_BPDU_CPU_INCLUDE = 5,
+- MT753X_BPDU_CPU_ONLY = 6,
+- MT753X_BPDU_DROP = 7,
++enum mt753x_to_cpu_fw {
++ TO_CPU_FW_SYSTEM_DEFAULT,
++ TO_CPU_FW_CPU_EXCLUDE = 4,
++ TO_CPU_FW_CPU_INCLUDE = 5,
++ TO_CPU_FW_CPU_ONLY = 6,
++ TO_CPU_FW_DROP = 7,
+ };
+
+ /* Registers for address table access */
--- /dev/null
+From 1dbc1bdc2869e6d2929235c70d64e393aa5a5fa2 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:12 +0300
+Subject: [PATCH 05/15] net: dsa: mt7530: refactor MT7530_MFC and MT7531_CFC,
+ add MT7531_QRY_FFP
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7530_MFC register is on MT7530, MT7531, and the switch on the MT7988
+SoC. Rename it to MT753X_MFC. Bit 7 to 0 differs between MT7530 and
+MT7531/MT7988. Add MT7530 prefix to these definitions, and define the
+IGMP/MLD Query Frame Flooding Ports mask for MT7531.
+
+Rename the cases of MIRROR_MASK to MIRROR_PORT_MASK.
+
+Move mt753x_mirror_port_get() and mt753x_port_mirror_set() to mt7530.h as
+macros.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 38 ++++++++--------------
+ drivers/net/dsa/mt7530.h | 69 +++++++++++++++++++++++++---------------
+ 2 files changed, 57 insertions(+), 50 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1140,7 +1140,7 @@ mt753x_cpu_port_enable(struct dsa_switch
+ PORT_SPEC_TAG);
+
+ /* Enable flooding on the CPU port */
+- mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
++ mt7530_set(priv, MT753X_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
+ UNU_FFP(BIT(port)));
+
+ /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
+@@ -1304,15 +1304,15 @@ mt7530_port_bridge_flags(struct dsa_swit
+ flags.val & BR_LEARNING ? 0 : SA_DIS);
+
+ if (flags.mask & BR_FLOOD)
+- mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)),
++ mt7530_rmw(priv, MT753X_MFC, UNU_FFP(BIT(port)),
+ flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0);
+
+ if (flags.mask & BR_MCAST_FLOOD)
+- mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)),
++ mt7530_rmw(priv, MT753X_MFC, UNM_FFP(BIT(port)),
+ flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0);
+
+ if (flags.mask & BR_BCAST_FLOOD)
+- mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)),
++ mt7530_rmw(priv, MT753X_MFC, BC_FFP(BIT(port)),
+ flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0);
+
+ return 0;
+@@ -1848,20 +1848,6 @@ mt7530_port_vlan_del(struct dsa_switch *
+ return 0;
+ }
+
+-static int mt753x_mirror_port_get(unsigned int id, u32 val)
+-{
+- return (id == ID_MT7531 || id == ID_MT7988) ?
+- MT7531_MIRROR_PORT_GET(val) :
+- MIRROR_PORT(val);
+-}
+-
+-static int mt753x_mirror_port_set(unsigned int id, u32 val)
+-{
+- return (id == ID_MT7531 || id == ID_MT7988) ?
+- MT7531_MIRROR_PORT_SET(val) :
+- MIRROR_PORT(val);
+-}
+-
+ static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress, struct netlink_ext_ack *extack)
+@@ -1877,14 +1863,14 @@ static int mt753x_port_mirror_add(struct
+ val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
+
+ /* MT7530 only supports one monitor port */
+- monitor_port = mt753x_mirror_port_get(priv->id, val);
++ monitor_port = MT753X_MIRROR_PORT_GET(priv->id, val);
+ if (val & MT753X_MIRROR_EN(priv->id) &&
+ monitor_port != mirror->to_local_port)
+ return -EEXIST;
+
+ val |= MT753X_MIRROR_EN(priv->id);
+- val &= ~MT753X_MIRROR_MASK(priv->id);
+- val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port);
++ val &= ~MT753X_MIRROR_PORT_MASK(priv->id);
++ val |= MT753X_MIRROR_PORT_SET(priv->id, mirror->to_local_port);
+ mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
+
+ val = mt7530_read(priv, MT7530_PCR_P(port));
+@@ -2524,7 +2510,7 @@ mt7531_setup_common(struct dsa_switch *d
+ mt7530_mib_reset(ds);
+
+ /* Disable flooding on all ports */
+- mt7530_clear(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK |
++ mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
+ UNU_FFP_MASK);
+
+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
+@@ -3086,10 +3072,12 @@ mt753x_conduit_state_change(struct dsa_s
+ else
+ priv->active_cpu_ports &= ~mask;
+
+- if (priv->active_cpu_ports)
+- val = CPU_EN | CPU_PORT(__ffs(priv->active_cpu_ports));
++ if (priv->active_cpu_ports) {
++ val = MT7530_CPU_EN |
++ MT7530_CPU_PORT(__ffs(priv->active_cpu_ports));
++ }
+
+- mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val);
++ mt7530_rmw(priv, MT753X_MFC, MT7530_CPU_EN | MT7530_CPU_PORT_MASK, val);
+ }
+
+ static int mt7988_setup(struct dsa_switch *ds)
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -36,36 +36,55 @@ enum mt753x_id {
+ #define MT753X_AGC 0xc
+ #define LOCAL_EN BIT(7)
+
+-/* Registers to mac forward control for unknown frames */
+-#define MT7530_MFC 0x10
+-#define BC_FFP(x) (((x) & 0xff) << 24)
+-#define BC_FFP_MASK BC_FFP(~0)
+-#define UNM_FFP(x) (((x) & 0xff) << 16)
+-#define UNM_FFP_MASK UNM_FFP(~0)
+-#define UNU_FFP(x) (((x) & 0xff) << 8)
+-#define UNU_FFP_MASK UNU_FFP(~0)
+-#define CPU_EN BIT(7)
+-#define CPU_PORT_MASK GENMASK(6, 4)
+-#define CPU_PORT(x) FIELD_PREP(CPU_PORT_MASK, x)
+-#define MIRROR_EN BIT(3)
+-#define MIRROR_PORT(x) ((x) & 0x7)
+-#define MIRROR_MASK 0x7
++/* Register for MAC forward control */
++#define MT753X_MFC 0x10
++#define BC_FFP_MASK GENMASK(31, 24)
++#define BC_FFP(x) FIELD_PREP(BC_FFP_MASK, x)
++#define UNM_FFP_MASK GENMASK(23, 16)
++#define UNM_FFP(x) FIELD_PREP(UNM_FFP_MASK, x)
++#define UNU_FFP_MASK GENMASK(15, 8)
++#define UNU_FFP(x) FIELD_PREP(UNU_FFP_MASK, x)
++#define MT7530_CPU_EN BIT(7)
++#define MT7530_CPU_PORT_MASK GENMASK(6, 4)
++#define MT7530_CPU_PORT(x) FIELD_PREP(MT7530_CPU_PORT_MASK, x)
++#define MT7530_MIRROR_EN BIT(3)
++#define MT7530_MIRROR_PORT_MASK GENMASK(2, 0)
++#define MT7530_MIRROR_PORT_GET(x) FIELD_GET(MT7530_MIRROR_PORT_MASK, x)
++#define MT7530_MIRROR_PORT_SET(x) FIELD_PREP(MT7530_MIRROR_PORT_MASK, x)
++#define MT7531_QRY_FFP_MASK GENMASK(7, 0)
++#define MT7531_QRY_FFP(x) FIELD_PREP(MT7531_QRY_FFP_MASK, x)
+
+-/* Registers for CPU forward control */
++/* Register for CPU forward control */
+ #define MT7531_CFC 0x4
+ #define MT7531_MIRROR_EN BIT(19)
+-#define MT7531_MIRROR_MASK (MIRROR_MASK << 16)
+-#define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK)
+-#define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16)
++#define MT7531_MIRROR_PORT_MASK GENMASK(18, 16)
++#define MT7531_MIRROR_PORT_GET(x) FIELD_GET(MT7531_MIRROR_PORT_MASK, x)
++#define MT7531_MIRROR_PORT_SET(x) FIELD_PREP(MT7531_MIRROR_PORT_MASK, x)
+ #define MT7531_CPU_PMAP_MASK GENMASK(7, 0)
+ #define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
+
+-#define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+- MT7531_CFC : MT7530_MFC)
+-#define MT753X_MIRROR_EN(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+- MT7531_MIRROR_EN : MIRROR_EN)
+-#define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+- MT7531_MIRROR_MASK : MIRROR_MASK)
++#define MT753X_MIRROR_REG(id) ((id == ID_MT7531 || \
++ id == ID_MT7988) ? \
++ MT7531_CFC : MT753X_MFC)
++
++#define MT753X_MIRROR_EN(id) ((id == ID_MT7531 || \
++ id == ID_MT7988) ? \
++ MT7531_MIRROR_EN : MT7530_MIRROR_EN)
++
++#define MT753X_MIRROR_PORT_MASK(id) ((id == ID_MT7531 || \
++ id == ID_MT7988) ? \
++ MT7531_MIRROR_PORT_MASK : \
++ MT7530_MIRROR_PORT_MASK)
++
++#define MT753X_MIRROR_PORT_GET(id, val) ((id == ID_MT7531 || \
++ id == ID_MT7988) ? \
++ MT7531_MIRROR_PORT_GET(val) : \
++ MT7530_MIRROR_PORT_GET(val))
++
++#define MT753X_MIRROR_PORT_SET(id, val) ((id == ID_MT7531 || \
++ id == ID_MT7988) ? \
++ MT7531_MIRROR_PORT_SET(val) : \
++ MT7530_MIRROR_PORT_SET(val))
+
+ /* Register for BPDU and PAE frame control */
+ #define MT753X_BPC 0x24
--- /dev/null
+From 3ccf67597d35c06a7319e407b1c42f78a7966779 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:13 +0300
+Subject: [PATCH 06/15] net: dsa: mt7530: refactor MT7530_HWTRAP and
+ MT7530_MHWTRAP
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7530_HWTRAP and MT7530_MHWTRAP registers are on MT7530 and MT7531.
+It's called hardware trap on MT7530, software trap on MT7531. That's
+because some bits of the trap on MT7530 cannot be modified by software
+whilst all bits of the trap on MT7531 can. Rename the definitions for them
+to MT753X_TRAP and MT753X_MTRAP. Add MT7530 and MT7531 prefixes to the
+definitions specific to the switch model.
+
+Remove the extra parentheses from MT7530_XTAL_40MHZ and MT7530_XTAL_20MHZ.
+
+Rename MHWTRAP_PHY0_SEL, MHWTRAP_MANUAL, and MHWTRAP_PHY_ACCESS to be on
+par with the "MT7621 Giga Switch Programming Guide v0.3" document.
+
+Make an enumaration for the XTAL frequency. Set the data type of the xtal
+variable on mt7531_pll_setup() to it.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 59 ++++++++++++++++++++--------------------
+ drivers/net/dsa/mt7530.h | 50 ++++++++++++++++------------------
+ 2 files changed, 54 insertions(+), 55 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -403,23 +403,23 @@ mt7530_setup_port6(struct dsa_switch *ds
+
+ mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1));
+
+- xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
++ xtal = mt7530_read(priv, MT753X_MTRAP) & MT7530_XTAL_MASK;
+
+- if (xtal == HWTRAP_XTAL_25MHZ)
++ if (xtal == MT7530_XTAL_25MHZ)
+ ssc_delta = 0x57;
+ else
+ ssc_delta = 0x87;
+
+ if (priv->id == ID_MT7621) {
+ /* PLL frequency: 125MHz: 1.0GBit */
+- if (xtal == HWTRAP_XTAL_40MHZ)
++ if (xtal == MT7530_XTAL_40MHZ)
+ ncpo1 = 0x0640;
+- if (xtal == HWTRAP_XTAL_25MHZ)
++ if (xtal == MT7530_XTAL_25MHZ)
+ ncpo1 = 0x0a00;
+ } else { /* PLL frequency: 250MHz: 2.0Gbit */
+- if (xtal == HWTRAP_XTAL_40MHZ)
++ if (xtal == MT7530_XTAL_40MHZ)
+ ncpo1 = 0x0c80;
+- if (xtal == HWTRAP_XTAL_25MHZ)
++ if (xtal == MT7530_XTAL_25MHZ)
+ ncpo1 = 0x1400;
+ }
+
+@@ -442,19 +442,20 @@ mt7530_setup_port6(struct dsa_switch *ds
+ static void
+ mt7531_pll_setup(struct mt7530_priv *priv)
+ {
++ enum mt7531_xtal_fsel xtal;
+ u32 top_sig;
+ u32 hwstrap;
+- u32 xtal;
+ u32 val;
+
+ val = mt7530_read(priv, MT7531_CREV);
+ top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
+- hwstrap = mt7530_read(priv, MT7531_HWTRAP);
++ hwstrap = mt7530_read(priv, MT753X_TRAP);
+ if ((val & CHIP_REV_M) > 0)
+- xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ :
+- HWTRAP_XTAL_FSEL_25MHZ;
++ xtal = (top_sig & PAD_MCM_SMI_EN) ? MT7531_XTAL_FSEL_40MHZ :
++ MT7531_XTAL_FSEL_25MHZ;
+ else
+- xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK;
++ xtal = (hwstrap & MT7531_XTAL25) ? MT7531_XTAL_FSEL_25MHZ :
++ MT7531_XTAL_FSEL_40MHZ;
+
+ /* Step 1 : Disable MT7531 COREPLL */
+ val = mt7530_read(priv, MT7531_PLLGP_EN);
+@@ -483,13 +484,13 @@ mt7531_pll_setup(struct mt7530_priv *pri
+ usleep_range(25, 35);
+
+ switch (xtal) {
+- case HWTRAP_XTAL_FSEL_25MHZ:
++ case MT7531_XTAL_FSEL_25MHZ:
+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ val &= ~RG_COREPLL_SDM_PCW_M;
+ val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
+ break;
+- case HWTRAP_XTAL_FSEL_40MHZ:
++ case MT7531_XTAL_FSEL_40MHZ:
+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ val &= ~RG_COREPLL_SDM_PCW_M;
+ val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
+@@ -870,20 +871,20 @@ static void mt7530_setup_port5(struct ds
+
+ mutex_lock(&priv->reg_mutex);
+
+- val = mt7530_read(priv, MT7530_MHWTRAP);
++ val = mt7530_read(priv, MT753X_MTRAP);
+
+- val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
+- val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
++ val |= MT7530_CHG_TRAP | MT7530_P5_MAC_SEL | MT7530_P5_DIS;
++ val &= ~MT7530_P5_RGMII_MODE & ~MT7530_P5_PHY0_SEL;
+
+ switch (priv->p5_mode) {
+ /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
+ case MUX_PHY_P0:
+- val |= MHWTRAP_PHY0_SEL;
++ val |= MT7530_P5_PHY0_SEL;
+ fallthrough;
+
+ /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
+ case MUX_PHY_P4:
+- val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
++ val &= ~MT7530_P5_MAC_SEL & ~MT7530_P5_DIS;
+
+ /* Setup the MAC by default for the cpu port */
+ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
+@@ -891,13 +892,13 @@ static void mt7530_setup_port5(struct ds
+
+ /* GMAC5: P5 -> SoC MAC or external PHY */
+ default:
+- val &= ~MHWTRAP_P5_DIS;
++ val &= ~MT7530_P5_DIS;
+ break;
+ }
+
+ /* Setup RGMII settings */
+ if (phy_interface_mode_is_rgmii(interface)) {
+- val |= MHWTRAP_P5_RGMII_MODE;
++ val |= MT7530_P5_RGMII_MODE;
+
+ /* P5 RGMII RX Clock Control: delay setting for 1000M */
+ mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
+@@ -917,7 +918,7 @@ static void mt7530_setup_port5(struct ds
+ P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
+ }
+
+- mt7530_write(priv, MT7530_MHWTRAP, val);
++ mt7530_write(priv, MT753X_MTRAP, val);
+
+ dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
+ mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
+@@ -2356,7 +2357,7 @@ mt7530_setup(struct dsa_switch *ds)
+ }
+
+ /* Waiting for MT7530 got to stable */
+- INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
++ INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
+ ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
+ 20, 1000000);
+ if (ret < 0) {
+@@ -2371,7 +2372,7 @@ mt7530_setup(struct dsa_switch *ds)
+ return -ENODEV;
+ }
+
+- if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) {
++ if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_20MHZ) {
+ dev_err(priv->dev,
+ "MT7530 with a 20MHz XTAL is not supported!\n");
+ return -EINVAL;
+@@ -2392,12 +2393,12 @@ mt7530_setup(struct dsa_switch *ds)
+ RD_TAP_MASK, RD_TAP(16));
+
+ /* Enable port 6 */
+- val = mt7530_read(priv, MT7530_MHWTRAP);
+- val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
+- val |= MHWTRAP_MANUAL;
+- mt7530_write(priv, MT7530_MHWTRAP, val);
++ val = mt7530_read(priv, MT753X_MTRAP);
++ val &= ~MT7530_P6_DIS & ~MT7530_PHY_INDIRECT_ACCESS;
++ val |= MT7530_CHG_TRAP;
++ mt7530_write(priv, MT753X_MTRAP, val);
+
+- if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
++ if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
+ mt7530_pll_setup(priv);
+
+ mt753x_trap_frames(priv);
+@@ -2577,7 +2578,7 @@ mt7531_setup(struct dsa_switch *ds)
+ }
+
+ /* Waiting for MT7530 got to stable */
+- INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
++ INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
+ ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
+ 20, 1000000);
+ if (ret < 0) {
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -495,32 +495,30 @@ enum mt7531_clk_skew {
+ MT7531_CLK_SKEW_REVERSE = 3,
+ };
+
+-/* Register for hw trap status */
+-#define MT7530_HWTRAP 0x7800
+-#define HWTRAP_XTAL_MASK (BIT(10) | BIT(9))
+-#define HWTRAP_XTAL_25MHZ (BIT(10) | BIT(9))
+-#define HWTRAP_XTAL_40MHZ (BIT(10))
+-#define HWTRAP_XTAL_20MHZ (BIT(9))
++/* Register for trap status */
++#define MT753X_TRAP 0x7800
++#define MT7530_XTAL_MASK (BIT(10) | BIT(9))
++#define MT7530_XTAL_25MHZ (BIT(10) | BIT(9))
++#define MT7530_XTAL_40MHZ BIT(10)
++#define MT7530_XTAL_20MHZ BIT(9)
++#define MT7531_XTAL25 BIT(7)
+
+-#define MT7531_HWTRAP 0x7800
+-#define HWTRAP_XTAL_FSEL_MASK BIT(7)
+-#define HWTRAP_XTAL_FSEL_25MHZ BIT(7)
+-#define HWTRAP_XTAL_FSEL_40MHZ 0
+-/* Unique fields of (M)HWSTRAP for MT7531 */
+-#define XTAL_FSEL_S 7
+-#define XTAL_FSEL_M BIT(7)
+-#define PHY_EN BIT(6)
+-#define CHG_STRAP BIT(8)
++/* Register for trap modification */
++#define MT753X_MTRAP 0x7804
++#define MT7530_P5_PHY0_SEL BIT(20)
++#define MT7530_CHG_TRAP BIT(16)
++#define MT7530_P5_MAC_SEL BIT(13)
++#define MT7530_P6_DIS BIT(8)
++#define MT7530_P5_RGMII_MODE BIT(7)
++#define MT7530_P5_DIS BIT(6)
++#define MT7530_PHY_INDIRECT_ACCESS BIT(5)
++#define MT7531_CHG_STRAP BIT(8)
++#define MT7531_PHY_EN BIT(6)
+
+-/* Register for hw trap modification */
+-#define MT7530_MHWTRAP 0x7804
+-#define MHWTRAP_PHY0_SEL BIT(20)
+-#define MHWTRAP_MANUAL BIT(16)
+-#define MHWTRAP_P5_MAC_SEL BIT(13)
+-#define MHWTRAP_P6_DIS BIT(8)
+-#define MHWTRAP_P5_RGMII_MODE BIT(7)
+-#define MHWTRAP_P5_DIS BIT(6)
+-#define MHWTRAP_PHY_ACCESS BIT(5)
++enum mt7531_xtal_fsel {
++ MT7531_XTAL_FSEL_25MHZ,
++ MT7531_XTAL_FSEL_40MHZ,
++};
+
+ /* Register for TOP signal control */
+ #define MT7530_TOP_SIG_CTRL 0x7808
--- /dev/null
+From 2982f395c9a513b168f1e685588f70013cba2f5f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:14 +0300
+Subject: [PATCH 07/15] net: dsa: mt7530: move MT753X_MTRAP operations for
+ MT7530
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+On MT7530, the media-independent interfaces of port 5 and 6 are controlled
+by the MT7530_P5_DIS and MT7530_P6_DIS bits of the hardware trap. Deal with
+these bits only when the relevant port is being enabled or disabled. This
+ensures that these ports will be disabled when they are not in use.
+
+Do not set MT7530_CHG_TRAP on mt7530_setup_port5() as that's already being
+done on mt7530_setup().
+
+Instead of globally setting MT7530_P5_MAC_SEL, clear it, then set it only
+on the appropriate case.
+
+If PHY muxing is detected, clear MT7530_P5_DIS before calling
+mt7530_setup_port5().
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 38 +++++++++++++++++++++++++++-----------
+ 1 file changed, 27 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -873,8 +873,7 @@ static void mt7530_setup_port5(struct ds
+
+ val = mt7530_read(priv, MT753X_MTRAP);
+
+- val |= MT7530_CHG_TRAP | MT7530_P5_MAC_SEL | MT7530_P5_DIS;
+- val &= ~MT7530_P5_RGMII_MODE & ~MT7530_P5_PHY0_SEL;
++ val &= ~MT7530_P5_PHY0_SEL & ~MT7530_P5_MAC_SEL & ~MT7530_P5_RGMII_MODE;
+
+ switch (priv->p5_mode) {
+ /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
+@@ -884,15 +883,13 @@ static void mt7530_setup_port5(struct ds
+
+ /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
+ case MUX_PHY_P4:
+- val &= ~MT7530_P5_MAC_SEL & ~MT7530_P5_DIS;
+-
+ /* Setup the MAC by default for the cpu port */
+ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
+ break;
+
+ /* GMAC5: P5 -> SoC MAC or external PHY */
+ default:
+- val &= ~MT7530_P5_DIS;
++ val |= MT7530_P5_MAC_SEL;
+ break;
+ }
+
+@@ -1186,6 +1183,14 @@ mt7530_port_enable(struct dsa_switch *ds
+
+ mutex_unlock(&priv->reg_mutex);
+
++ if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
++ return 0;
++
++ if (port == 5)
++ mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
++ else if (port == 6)
++ mt7530_clear(priv, MT753X_MTRAP, MT7530_P6_DIS);
++
+ return 0;
+ }
+
+@@ -1204,6 +1209,14 @@ mt7530_port_disable(struct dsa_switch *d
+ PCR_MATRIX_CLR);
+
+ mutex_unlock(&priv->reg_mutex);
++
++ if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
++ return;
++
++ if (port == 5)
++ mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
++ else if (port == 6)
++ mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
+ }
+
+ static int
+@@ -2392,11 +2405,11 @@ mt7530_setup(struct dsa_switch *ds)
+ mt7530_rmw(priv, MT7530_TRGMII_RD(i),
+ RD_TAP_MASK, RD_TAP(16));
+
+- /* Enable port 6 */
+- val = mt7530_read(priv, MT753X_MTRAP);
+- val &= ~MT7530_P6_DIS & ~MT7530_PHY_INDIRECT_ACCESS;
+- val |= MT7530_CHG_TRAP;
+- mt7530_write(priv, MT753X_MTRAP, val);
++ /* Allow modifying the trap and directly access PHY registers via the
++ * MDIO bus the switch is on.
++ */
++ mt7530_rmw(priv, MT753X_MTRAP, MT7530_CHG_TRAP |
++ MT7530_PHY_INDIRECT_ACCESS, MT7530_CHG_TRAP);
+
+ if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
+ mt7530_pll_setup(priv);
+@@ -2479,8 +2492,11 @@ mt7530_setup(struct dsa_switch *ds)
+ break;
+ }
+
+- if (priv->p5_mode == MUX_PHY_P0 || priv->p5_mode == MUX_PHY_P4)
++ if (priv->p5_mode == MUX_PHY_P0 ||
++ priv->p5_mode == MUX_PHY_P4) {
++ mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ mt7530_setup_port5(ds, interface);
++ }
+ }
+
+ #ifdef CONFIG_GPIOLIB
--- /dev/null
+From 1f5669efca65564c7533704917f79003c6b36c9c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:15 +0300
+Subject: [PATCH 08/15] net: dsa: mt7530: return mt7530_setup_mdio &
+ mt7531_setup_common on error
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The mt7530_setup_mdio() and mt7531_setup_common() functions should be
+checked for errors. Return if the functions return a non-zero value.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2658,7 +2658,9 @@ mt7531_setup(struct dsa_switch *ds)
+ 0);
+ }
+
+- mt7531_setup_common(ds);
++ ret = mt7531_setup_common(ds);
++ if (ret)
++ return ret;
+
+ /* Setup VLAN ID 0 for VLAN-unaware bridges */
+ ret = mt7530_setup_vlan0(priv);
+@@ -3017,6 +3019,8 @@ mt753x_setup(struct dsa_switch *ds)
+ ret = mt7530_setup_mdio(priv);
+ if (ret && priv->irq)
+ mt7530_free_irq_common(priv);
++ if (ret)
++ return ret;
+
+ /* Initialise the PCS devices */
+ for (i = 0; i < priv->ds->num_ports; i++) {
--- /dev/null
+From 6cc2d4ccd77509df74b7b8ef46bbc6ba0a571318 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:16 +0300
+Subject: [PATCH 09/15] net: dsa: mt7530: define MAC speed capabilities per
+ switch model
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+With the support of the MT7988 SoC switch, the MAC speed capabilities
+defined on mt753x_phylink_get_caps() won't apply to all switch models
+anymore. Move them to more appropriate locations instead of overwriting
+config->mac_capabilities.
+
+Remove the comment on mt753x_phylink_get_caps() as it's become invalid with
+the support of MT7531 and MT7988 SoC switch.
+
+Add break to case 6 of mt7988_mac_port_get_caps() to be explicit.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 15 ++++++++++-----
+ 1 file changed, 10 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2676,6 +2676,8 @@ mt7531_setup(struct dsa_switch *ds)
+ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+ {
++ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
++
+ switch (port) {
+ /* Ports which are connected to switch PHYs. There is no MII pinout. */
+ case 0 ... 4:
+@@ -2707,6 +2709,8 @@ static void mt7531_mac_port_get_caps(str
+ {
+ struct mt7530_priv *priv = ds->priv;
+
++ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
++
+ switch (port) {
+ /* Ports which are connected to switch PHYs. There is no MII pinout. */
+ case 0 ... 4:
+@@ -2746,14 +2750,17 @@ static void mt7988_mac_port_get_caps(str
+ case 0 ... 3:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
++
++ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+ break;
+
+ /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */
+ case 6:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+- config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+- MAC_10000FD;
++
++ config->mac_capabilities |= MAC_10000FD;
++ break;
+ }
+ }
+
+@@ -2923,9 +2930,7 @@ static void mt753x_phylink_get_caps(stru
+ {
+ struct mt7530_priv *priv = ds->priv;
+
+- /* This switch only supports full-duplex at 1Gbps */
+- config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+- MAC_10 | MAC_100 | MAC_1000FD;
++ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
+
+ /* This driver does not make use of the speed, duplex, pause or the
+ * advertisement in its mac_config, so it is safe to mark this driver
--- /dev/null
+From dd0f15fc877c10567699190bce0f55e96f4ad6b5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:17 +0300
+Subject: [PATCH 10/15] net: dsa: mt7530: get rid of function sanity check
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Get rid of checking whether functions are filled properly. priv->info which
+is an mt753x_info structure is filled and checked for before this check.
+It's unnecessary checking whether it's filled properly.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 7 -------
+ 1 file changed, 7 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -3220,13 +3220,6 @@ mt7530_probe_common(struct mt7530_priv *
+ if (!priv->info)
+ return -EINVAL;
+
+- /* Sanity check if these required device operations are filled
+- * properly.
+- */
+- if (!priv->info->sw_setup || !priv->info->phy_read ||
+- !priv->info->phy_write || !priv->info->mac_port_get_caps)
+- return -EINVAL;
+-
+ priv->id = priv->info->id;
+ priv->dev = dev;
+ priv->ds->priv = priv;
--- /dev/null
+From 2dff9759602b069f97ccc939e15a47ca051b2983 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:18 +0300
+Subject: [PATCH 11/15] net: dsa: mt7530: refactor MT7530_PMEEECR_P()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7530_PMEEECR_P() register is on MT7530, MT7531, and the switch on the
+MT7988 SoC. Rename the definition for them to MT753X_PMEEECR_P(). Use the
+FIELD_PREP and FIELD_GET macros. Rename GET_LPI_THRESH() and
+SET_LPI_THRESH() to LPI_THRESH_GET() and LPI_THRESH_SET().
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 8 ++++----
+ drivers/net/dsa/mt7530.h | 13 +++++++------
+ 2 files changed, 11 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -3048,10 +3048,10 @@ static int mt753x_get_mac_eee(struct dsa
+ struct ethtool_eee *e)
+ {
+ struct mt7530_priv *priv = ds->priv;
+- u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
++ u32 eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
+
+ e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
+- e->tx_lpi_timer = GET_LPI_THRESH(eeecr);
++ e->tx_lpi_timer = LPI_THRESH_GET(eeecr);
+
+ return 0;
+ }
+@@ -3065,11 +3065,11 @@ static int mt753x_set_mac_eee(struct dsa
+ if (e->tx_lpi_timer > 0xFFF)
+ return -EINVAL;
+
+- set = SET_LPI_THRESH(e->tx_lpi_timer);
++ set = LPI_THRESH_SET(e->tx_lpi_timer);
+ if (!e->tx_lpi_enabled)
+ /* Force LPI Mode without a delay */
+ set |= LPI_MODE_EN;
+- mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set);
++ mt7530_rmw(priv, MT753X_PMEEECR_P(port), mask, set);
+
+ return 0;
+ }
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -364,13 +364,14 @@ enum mt7530_vlan_port_acc_frm {
+ PMCR_FORCE_SPEED_100 | \
+ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
+
+-#define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
+-#define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24)
+-#define WAKEUP_TIME_100(x) (((x) & 0xFF) << 16)
++#define MT753X_PMEEECR_P(x) (0x3004 + (x) * 0x100)
++#define WAKEUP_TIME_1000_MASK GENMASK(31, 24)
++#define WAKEUP_TIME_1000(x) FIELD_PREP(WAKEUP_TIME_1000_MASK, x)
++#define WAKEUP_TIME_100_MASK GENMASK(23, 16)
++#define WAKEUP_TIME_100(x) FIELD_PREP(WAKEUP_TIME_100_MASK, x)
+ #define LPI_THRESH_MASK GENMASK(15, 4)
+-#define LPI_THRESH_SHT 4
+-#define SET_LPI_THRESH(x) (((x) << LPI_THRESH_SHT) & LPI_THRESH_MASK)
+-#define GET_LPI_THRESH(x) (((x) & LPI_THRESH_MASK) >> LPI_THRESH_SHT)
++#define LPI_THRESH_GET(x) FIELD_GET(LPI_THRESH_MASK, x)
++#define LPI_THRESH_SET(x) FIELD_PREP(LPI_THRESH_MASK, x)
+ #define LPI_MODE_EN BIT(0)
+
+ #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100)
--- /dev/null
+From 21d67c2fabfe40baf33202d3287b67b6c16f8382 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:19 +0300
+Subject: [PATCH 12/15] net: dsa: mt7530: get rid of mac_port_validate member
+ of mt753x_info
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The mac_port_validate member of the mt753x_info structure is not being
+used, remove it. Improve the member description section in the process.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.h | 10 +++-------
+ 1 file changed, 3 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -743,13 +743,12 @@ struct mt753x_pcs {
+
+ /* struct mt753x_info - This is the main data structure for holding the specific
+ * part for each supported device
++ * @id: Holding the identifier to a switch model
++ * @pcs_ops: Holding the pointer to the MAC PCS operations structure
+ * @sw_setup: Holding the handler to a device initialization
+ * @phy_read: Holding the way reading PHY port
+ * @phy_write: Holding the way writing PHY port
+- * @phy_mode_supported: Check if the PHY type is being supported on a certain
+- * port
+- * @mac_port_validate: Holding the way to set addition validate type for a
+- * certan MAC port
++ * @mac_port_get_caps: Holding the handler that provides MAC capabilities
+ * @mac_port_config: Holding the way setting up the PHY attribute to a
+ * certain MAC port
+ */
+@@ -763,9 +762,6 @@ struct mt753x_info {
+ int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
+ void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
+ struct phylink_config *config);
+- void (*mac_port_validate)(struct dsa_switch *ds, int port,
+- phy_interface_t interface,
+- unsigned long *supported);
+ void (*mac_port_config)(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface);
--- /dev/null
+From 6efc8ae3eb0363328f479191a0cf0dc12a16e090 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:20 +0300
+Subject: [PATCH 13/15] net: dsa: mt7530: use priv->ds->num_ports instead of
+ MT7530_NUM_PORTS
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Use priv->ds->num_ports on all for loops which configure the switch
+registers. In the future, the value of MT7530_NUM_PORTS will depend on
+priv->id. Therefore, this change prepares the subdriver for a simpler
+implementation.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1404,7 +1404,7 @@ mt7530_port_set_vlan_unaware(struct dsa_
+ mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
+ G0_PORT_VID_DEF);
+
+- for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ for (i = 0; i < priv->ds->num_ports; i++) {
+ if (dsa_is_user_port(ds, i) &&
+ dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
+ all_user_ports_removed = false;
+@@ -2419,7 +2419,7 @@ mt7530_setup(struct dsa_switch *ds)
+ /* Enable and reset MIB counters */
+ mt7530_mib_reset(ds);
+
+- for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ for (i = 0; i < priv->ds->num_ports; i++) {
+ /* Clear link settings and enable force mode to force link down
+ * on all ports until they're enabled later.
+ */
+@@ -2530,7 +2530,7 @@ mt7531_setup_common(struct dsa_switch *d
+ mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
+ UNU_FFP_MASK);
+
+- for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ for (i = 0; i < priv->ds->num_ports; i++) {
+ /* Clear link settings and enable force mode to force link down
+ * on all ports until they're enabled later.
+ */
+@@ -2617,7 +2617,7 @@ mt7531_setup(struct dsa_switch *ds)
+ priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
+
+ /* Force link down on all ports before internal reset */
+- for (i = 0; i < MT7530_NUM_PORTS; i++)
++ for (i = 0; i < priv->ds->num_ports; i++)
+ mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
+
+ /* Reset the switch through internal reset */
--- /dev/null
+From 4794c12e3aefe05dd0063c2b6b0101854b143bac Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:21 +0300
+Subject: [PATCH 14/15] net: dsa: mt7530: do not pass port variable to
+ mt7531_rgmii_setup()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The mt7531_rgmii_setup() function does not use the port variable, do not
+pass the variable to it.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2776,7 +2776,7 @@ mt7530_mac_config(struct dsa_switch *ds,
+ mt7530_setup_port6(priv->ds, interface);
+ }
+
+-static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
++static void mt7531_rgmii_setup(struct mt7530_priv *priv,
+ phy_interface_t interface,
+ struct phy_device *phydev)
+ {
+@@ -2827,7 +2827,7 @@ mt7531_mac_config(struct dsa_switch *ds,
+ if (phy_interface_mode_is_rgmii(interface)) {
+ dp = dsa_to_port(ds, port);
+ phydev = dp->slave->phydev;
+- mt7531_rgmii_setup(priv, port, interface, phydev);
++ mt7531_rgmii_setup(priv, interface, phydev);
+ }
+ }
+
--- /dev/null
+From c45832fe783f468aaaace09ae95a30cbf0acf724 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:22 +0300
+Subject: [PATCH 15/15] net: dsa: mt7530: explain exposing MDIO bus of MT7531AE
+ better
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on MT7531AE.
+Therefore, the GPIO 11-12 pins are set to function as MDC and MDIO to
+expose the MDIO bus of the switch. Replace the comment with a better
+explanation.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2626,7 +2626,10 @@ mt7531_setup(struct dsa_switch *ds)
+ if (!priv->p5_sgmii) {
+ mt7531_pll_setup(priv);
+ } else {
+- /* Let ds->slave_mii_bus be able to access external phy. */
++ /* Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on
++ * MT7531AE. Set the GPIO 11-12 pins to function as MDC and MDIO
++ * to expose the MDIO bus of the switch.
++ */
+ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
+ MT7531_EXT_P_MDC_11);
+ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
--- /dev/null
+From 856e8954a0a88d1a4d2b43e9002b9249131a156f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:08 +0300
+Subject: [PATCH 01/15] net: dsa: mt7530: disable EEE abilities on failure on
+ MT7531 and MT7988
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 bits let the
+PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits determine the 1G/100 EEE
+abilities of the MAC. If MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 are
+unset, the abilities are left to be determined by PHY auto polling.
+
+The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
+made it so that the PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits are set on
+mt753x_phylink_mac_link_up(). But it did not set the MT7531_FORCE_EEE1G and
+MT7531_FORCE_EEE100 bits. Because of this, the EEE abilities will be
+determined by PHY auto polling, regardless of the result of phy_init_eee().
+
+Define these bits and add them to the MT7531_FORCE_MODE mask which is set
+in mt7531_setup_common(). With this, there won't be any EEE abilities set
+when phy_init_eee() returns a negative value.
+
+Thanks to Russell for explaining when phy_init_eee() could return a
+negative value below.
+
+Looking at phy_init_eee(), it could return a negative value when:
+
+1. phydev->drv is NULL
+2. if genphy_c45_eee_is_active() returns negative
+3. if genphy_c45_eee_is_active() returns zero, it returns -EPROTONOSUPPORT
+4. if phy_set_bits_mmd() fails (e.g. communication error with the PHY)
+
+If we then look at genphy_c45_eee_is_active(), then:
+
+genphy_c45_read_eee_adv() and genphy_c45_read_eee_lpa() propagate their
+non-zero return values, otherwise this function returns zero or positive
+integer.
+
+If we then look at genphy_c45_read_eee_adv(), then a failure of
+phy_read_mmd() would cause a negative value to be returned.
+
+Looking at genphy_c45_read_eee_lpa(), the same is true.
+
+So, it can be summarised as:
+
+- phydev->drv is NULL
+- there is a communication error accessing the PHY
+- EEE is not active
+
+otherwise, it returns zero on success.
+
+If one wishes to determine whether an error occurred vs EEE not being
+supported through negotiation for the negotiated speed, if it returns
+-EPROTONOSUPPORT in the latter case. Other error codes mean either the
+driver has been unloaded or communication error.
+
+In conclusion, determining the EEE abilities by PHY auto polling shouldn't
+result in having any EEE abilities enabled, when one of the last two
+situations in the summary happens. And it seems that if phydev->drv is
+NULL, there would be bigger problems with the device than a broken link. So
+this is not a bugfix.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.h | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -328,11 +328,15 @@ enum mt7530_vlan_port_acc_frm {
+ #define MT7531_FORCE_DPX BIT(29)
+ #define MT7531_FORCE_RX_FC BIT(28)
+ #define MT7531_FORCE_TX_FC BIT(27)
++#define MT7531_FORCE_EEE100 BIT(26)
++#define MT7531_FORCE_EEE1G BIT(25)
+ #define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
+ MT7531_FORCE_SPD | \
+ MT7531_FORCE_DPX | \
+ MT7531_FORCE_RX_FC | \
+- MT7531_FORCE_TX_FC)
++ MT7531_FORCE_TX_FC | \
++ MT7531_FORCE_EEE100 | \
++ MT7531_FORCE_EEE1G)
+ #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
+ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
+ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
--- /dev/null
+From 712ad00d2f43814c81a7abfcbc339690a05fb6a0 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:09 +0300
+Subject: [PATCH 02/15] net: dsa: mt7530: refactor MT7530_PMCR_P()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7530_PMCR_P() registers are on MT7530, MT7531, and the switch on the
+MT7988 SoC. Rename the definition for them to MT753X_PMCR_P(). Bit 15 is
+for MT7530 only. Add MT7530 prefix to the definition for bit 15.
+
+Use GENMASK and FIELD_PREP for PMCR_IFG_XMIT().
+
+Rename PMCR_TX_EN and PMCR_RX_EN to PMCR_MAC_TX_EN and PMCR_MAC_TX_EN to
+follow the naming on the "MT7621 Giga Switch Programming Guide v0.3",
+"MT7531 Reference Manual for Development Board v1.0", and "MT7988A Wi-Fi 7
+Generation Router Platform: Datasheet (Open Version) v0.1" documents.
+
+These documents show that PMCR_RX_FC_EN is at bit 5. Correct this along
+with renaming it to PMCR_FORCE_RX_FC_EN, and the same for PMCR_TX_FC_EN.
+
+Remove PMCR_SPEED_MASK which doesn't have a use.
+
+Rename the force mode definitions for MT7531 to FORCE_MODE. Add MASK at the
+end for the mask that includes all force mode definitions.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 24 ++++++++---------
+ drivers/net/dsa/mt7530.h | 58 +++++++++++++++++++++-------------------
+ 2 files changed, 42 insertions(+), 40 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -896,7 +896,7 @@ static void mt7530_setup_port5(struct ds
+ val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
+
+ /* Setup the MAC by default for the cpu port */
+- mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
++ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
+ break;
+ case P5_INTF_SEL_GMAC5:
+ /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
+@@ -2444,8 +2444,8 @@ mt7530_setup(struct dsa_switch *ds)
+ /* Clear link settings and enable force mode to force link down
+ * on all ports until they're enabled later.
+ */
+- mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
+- PMCR_FORCE_MODE, PMCR_FORCE_MODE);
++ mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
++ MT7530_FORCE_MODE, MT7530_FORCE_MODE);
+
+ /* Disable forwarding by default on all ports */
+ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
+@@ -2555,8 +2555,8 @@ mt7531_setup_common(struct dsa_switch *d
+ /* Clear link settings and enable force mode to force link down
+ * on all ports until they're enabled later.
+ */
+- mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
+- MT7531_FORCE_MODE, MT7531_FORCE_MODE);
++ mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
++ MT7531_FORCE_MODE_MASK, MT7531_FORCE_MODE_MASK);
+
+ /* Disable forwarding by default on all ports */
+ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
+@@ -2639,7 +2639,7 @@ mt7531_setup(struct dsa_switch *ds)
+
+ /* Force link down on all ports before internal reset */
+ for (i = 0; i < MT7530_NUM_PORTS; i++)
+- mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
++ mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
+
+ /* Reset the switch through internal reset */
+ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
+@@ -2881,7 +2881,7 @@ mt753x_phylink_mac_config(struct phylink
+
+ /* Are we connected to external phy */
+ if (port == 5 && dsa_is_user_port(ds, 5))
+- mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
++ mt7530_set(priv, MT753X_PMCR_P(port), PMCR_EXT_PHY);
+ }
+
+ static void mt753x_phylink_mac_link_down(struct phylink_config *config,
+@@ -2891,7 +2891,7 @@ static void mt753x_phylink_mac_link_down
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct mt7530_priv *priv = dp->ds->priv;
+
+- mt7530_clear(priv, MT7530_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
++ mt7530_clear(priv, MT753X_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
+ }
+
+ static void mt753x_phylink_mac_link_up(struct phylink_config *config,
+@@ -2905,7 +2905,7 @@ static void mt753x_phylink_mac_link_up(s
+ struct mt7530_priv *priv = dp->ds->priv;
+ u32 mcr;
+
+- mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
++ mcr = PMCR_MAC_RX_EN | PMCR_MAC_TX_EN | PMCR_FORCE_LNK;
+
+ switch (speed) {
+ case SPEED_1000:
+@@ -2920,9 +2920,9 @@ static void mt753x_phylink_mac_link_up(s
+ if (duplex == DUPLEX_FULL) {
+ mcr |= PMCR_FORCE_FDX;
+ if (tx_pause)
+- mcr |= PMCR_TX_FC_EN;
++ mcr |= PMCR_FORCE_TX_FC_EN;
+ if (rx_pause)
+- mcr |= PMCR_RX_FC_EN;
++ mcr |= PMCR_FORCE_RX_FC_EN;
+ }
+
+ if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
+@@ -2937,7 +2937,7 @@ static void mt753x_phylink_mac_link_up(s
+ }
+ }
+
+- mt7530_set(priv, MT7530_PMCR_P(dp->index), mcr);
++ mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr);
+ }
+
+ static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -304,44 +304,46 @@ enum mt7530_vlan_port_acc_frm {
+ #define G0_PORT_VID_DEF G0_PORT_VID(0)
+
+ /* Register for port MAC control register */
+-#define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100))
+-#define PMCR_IFG_XMIT(x) (((x) & 0x3) << 18)
++#define MT753X_PMCR_P(x) (0x3000 + ((x) * 0x100))
++#define PMCR_IFG_XMIT_MASK GENMASK(19, 18)
++#define PMCR_IFG_XMIT(x) FIELD_PREP(PMCR_IFG_XMIT_MASK, x)
+ #define PMCR_EXT_PHY BIT(17)
+ #define PMCR_MAC_MODE BIT(16)
+-#define PMCR_FORCE_MODE BIT(15)
+-#define PMCR_TX_EN BIT(14)
+-#define PMCR_RX_EN BIT(13)
++#define MT7530_FORCE_MODE BIT(15)
++#define PMCR_MAC_TX_EN BIT(14)
++#define PMCR_MAC_RX_EN BIT(13)
+ #define PMCR_BACKOFF_EN BIT(9)
+ #define PMCR_BACKPR_EN BIT(8)
+ #define PMCR_FORCE_EEE1G BIT(7)
+ #define PMCR_FORCE_EEE100 BIT(6)
+-#define PMCR_TX_FC_EN BIT(5)
+-#define PMCR_RX_FC_EN BIT(4)
++#define PMCR_FORCE_RX_FC_EN BIT(5)
++#define PMCR_FORCE_TX_FC_EN BIT(4)
+ #define PMCR_FORCE_SPEED_1000 BIT(3)
+ #define PMCR_FORCE_SPEED_100 BIT(2)
+ #define PMCR_FORCE_FDX BIT(1)
+ #define PMCR_FORCE_LNK BIT(0)
+-#define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \
+- PMCR_FORCE_SPEED_1000)
+-#define MT7531_FORCE_LNK BIT(31)
+-#define MT7531_FORCE_SPD BIT(30)
+-#define MT7531_FORCE_DPX BIT(29)
+-#define MT7531_FORCE_RX_FC BIT(28)
+-#define MT7531_FORCE_TX_FC BIT(27)
+-#define MT7531_FORCE_EEE100 BIT(26)
+-#define MT7531_FORCE_EEE1G BIT(25)
+-#define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
+- MT7531_FORCE_SPD | \
+- MT7531_FORCE_DPX | \
+- MT7531_FORCE_RX_FC | \
+- MT7531_FORCE_TX_FC | \
+- MT7531_FORCE_EEE100 | \
+- MT7531_FORCE_EEE1G)
+-#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
+- PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
+- PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
+- PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
+- PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
++#define MT7531_FORCE_MODE_LNK BIT(31)
++#define MT7531_FORCE_MODE_SPD BIT(30)
++#define MT7531_FORCE_MODE_DPX BIT(29)
++#define MT7531_FORCE_MODE_RX_FC BIT(28)
++#define MT7531_FORCE_MODE_TX_FC BIT(27)
++#define MT7531_FORCE_MODE_EEE100 BIT(26)
++#define MT7531_FORCE_MODE_EEE1G BIT(25)
++#define MT7531_FORCE_MODE_MASK (MT7531_FORCE_MODE_LNK | \
++ MT7531_FORCE_MODE_SPD | \
++ MT7531_FORCE_MODE_DPX | \
++ MT7531_FORCE_MODE_RX_FC | \
++ MT7531_FORCE_MODE_TX_FC | \
++ MT7531_FORCE_MODE_EEE100 | \
++ MT7531_FORCE_MODE_EEE1G)
++#define PMCR_LINK_SETTINGS_MASK (PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \
++ PMCR_FORCE_EEE1G | \
++ PMCR_FORCE_EEE100 | \
++ PMCR_FORCE_RX_FC_EN | \
++ PMCR_FORCE_TX_FC_EN | \
++ PMCR_FORCE_SPEED_1000 | \
++ PMCR_FORCE_SPEED_100 | \
++ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
+
+ #define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
+ #define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24)
--- /dev/null
+From 875ec5b67ab88e969b171e6e9ea803e3ed759614 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:10 +0300
+Subject: [PATCH 03/15] net: dsa: mt7530: rename p5_intf_sel and use only for
+ MT7530 switch
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The p5_intf_sel pointer is used to store the information of whether PHY
+muxing is used or not. PHY muxing is a feature specific to port 5 of the
+MT7530 switch. Do not use it for other switch models.
+
+Rename the pointer to p5_mode to store the mode the port is being used in.
+Rename the p5_interface_select enum to mt7530_p5_mode, the string
+representation to mt7530_p5_mode_str, and the enum elements.
+
+If PHY muxing is not detected, the default mode, GMAC5, will be used.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 62 +++++++++++++++++-----------------------
+ drivers/net/dsa/mt7530.h | 15 +++++-----
+ 2 files changed, 33 insertions(+), 44 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -857,19 +857,15 @@ mt7530_set_ageing_time(struct dsa_switch
+ return 0;
+ }
+
+-static const char *p5_intf_modes(unsigned int p5_interface)
++static const char *mt7530_p5_mode_str(unsigned int mode)
+ {
+- switch (p5_interface) {
+- case P5_DISABLED:
+- return "DISABLED";
+- case P5_INTF_SEL_PHY_P0:
+- return "PHY P0";
+- case P5_INTF_SEL_PHY_P4:
+- return "PHY P4";
+- case P5_INTF_SEL_GMAC5:
+- return "GMAC5";
++ switch (mode) {
++ case MUX_PHY_P0:
++ return "MUX PHY P0";
++ case MUX_PHY_P4:
++ return "MUX PHY P4";
+ default:
+- return "unknown";
++ return "GMAC5";
+ }
+ }
+
+@@ -886,23 +882,23 @@ static void mt7530_setup_port5(struct ds
+ val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
+ val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
+
+- switch (priv->p5_intf_sel) {
+- case P5_INTF_SEL_PHY_P0:
+- /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
++ switch (priv->p5_mode) {
++ /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
++ case MUX_PHY_P0:
+ val |= MHWTRAP_PHY0_SEL;
+ fallthrough;
+- case P5_INTF_SEL_PHY_P4:
+- /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
++
++ /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
++ case MUX_PHY_P4:
+ val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
+
+ /* Setup the MAC by default for the cpu port */
+ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
+ break;
+- case P5_INTF_SEL_GMAC5:
+- /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
+- val &= ~MHWTRAP_P5_DIS;
+- break;
++
++ /* GMAC5: P5 -> SoC MAC or external PHY */
+ default:
++ val &= ~MHWTRAP_P5_DIS;
+ break;
+ }
+
+@@ -930,8 +926,8 @@ static void mt7530_setup_port5(struct ds
+
+ mt7530_write(priv, MT7530_MHWTRAP, val);
+
+- dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
+- val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
++ dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
++ mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
+
+ mutex_unlock(&priv->reg_mutex);
+ }
+@@ -2476,13 +2472,11 @@ mt7530_setup(struct dsa_switch *ds)
+ if (ret)
+ return ret;
+
+- /* Setup port 5 */
+- if (!dsa_is_unused_port(ds, 5)) {
+- priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
+- } else {
++ /* Check for PHY muxing on port 5 */
++ if (dsa_is_unused_port(ds, 5)) {
+ /* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY.
+- * Set priv->p5_intf_sel to the appropriate value if PHY muxing
+- * is detected.
++ * Set priv->p5_mode to the appropriate value if PHY muxing is
++ * detected.
+ */
+ for_each_child_of_node(dn, mac_np) {
+ if (!of_device_is_compatible(mac_np,
+@@ -2506,17 +2500,16 @@ mt7530_setup(struct dsa_switch *ds)
+ }
+ id = of_mdio_parse_addr(ds->dev, phy_node);
+ if (id == 0)
+- priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
++ priv->p5_mode = MUX_PHY_P0;
+ if (id == 4)
+- priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
++ priv->p5_mode = MUX_PHY_P4;
+ }
+ of_node_put(mac_np);
+ of_node_put(phy_node);
+ break;
+ }
+
+- if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 ||
+- priv->p5_intf_sel == P5_INTF_SEL_PHY_P4)
++ if (priv->p5_mode == MUX_PHY_P0 || priv->p5_mode == MUX_PHY_P4)
+ mt7530_setup_port5(ds, interface);
+ }
+
+@@ -2654,9 +2647,6 @@ mt7531_setup(struct dsa_switch *ds)
+ MT7531_EXT_P_MDIO_12);
+ }
+
+- if (!dsa_is_unused_port(ds, 5))
+- priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
+-
+ mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
+ MT7531_GPIO0_INTERRUPT);
+
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -708,12 +708,11 @@ struct mt7530_port {
+ struct phylink_pcs *sgmii_pcs;
+ };
+
+-/* Port 5 interface select definitions */
+-enum p5_interface_select {
+- P5_DISABLED,
+- P5_INTF_SEL_PHY_P0,
+- P5_INTF_SEL_PHY_P4,
+- P5_INTF_SEL_GMAC5,
++/* Port 5 mode definitions of the MT7530 switch */
++enum mt7530_p5_mode {
++ GMAC5,
++ MUX_PHY_P0,
++ MUX_PHY_P4,
+ };
+
+ struct mt7530_priv;
+@@ -776,7 +775,7 @@ struct mt753x_info {
+ * @ports: Holding the state among ports
+ * @reg_mutex: The lock for protecting among process accessing
+ * registers
+- * @p5_intf_sel: Holding the current port 5 interface select
++ * @p5_mode: Holding the current mode of port 5 of the MT7530 switch
+ * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch
+ * has got SGMII
+ * @irq: IRQ number of the switch
+@@ -798,7 +797,7 @@ struct mt7530_priv {
+ const struct mt753x_info *info;
+ unsigned int id;
+ bool mcm;
+- enum p5_interface_select p5_intf_sel;
++ enum mt7530_p5_mode p5_mode;
+ bool p5_sgmii;
+ u8 mirror_rx;
+ u8 mirror_tx;
--- /dev/null
+From 83fe3df057e641cd0e88425e579d7a5a370ca430 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:11 +0300
+Subject: [PATCH 04/15] net: dsa: mt7530: rename mt753x_bpdu_port_fw enum to
+ mt753x_to_cpu_fw
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The mt753x_bpdu_port_fw enum is globally used for manipulating the process
+of deciding the forwardable ports, specifically concerning the CPU port(s).
+Therefore, rename it and the values in it to mt753x_to_cpu_fw.
+
+Change FOLLOW_MFC to SYSTEM_DEFAULT to be on par with the switch documents.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 44 ++++++++++-------------
+ drivers/net/dsa/mt7530.h | 76 ++++++++++++++++++++--------------------
+ 2 files changed, 56 insertions(+), 64 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1107,42 +1107,34 @@ mt753x_trap_frames(struct mt7530_priv *p
+ * VLAN-untagged.
+ */
+ mt7530_rmw(priv, MT753X_BPC,
+- MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
+- MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
+- MT753X_BPDU_PORT_FW_MASK,
+- MT753X_PAE_BPDU_FR |
+- MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ PAE_BPDU_FR | PAE_EG_TAG_MASK | PAE_PORT_FW_MASK |
++ BPDU_EG_TAG_MASK | BPDU_PORT_FW_MASK,
++ PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ PAE_PORT_FW(TO_CPU_FW_CPU_ONLY) |
++ BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ TO_CPU_FW_CPU_ONLY);
+
+ /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
+ * them VLAN-untagged.
+ */
+ mt7530_rmw(priv, MT753X_RGAC1,
+- MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
+- MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
+- MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
+- MT753X_R02_BPDU_FR |
+- MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_R01_BPDU_FR |
+- MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ R02_BPDU_FR | R02_EG_TAG_MASK | R02_PORT_FW_MASK |
++ R01_BPDU_FR | R01_EG_TAG_MASK | R01_PORT_FW_MASK,
++ R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ R02_PORT_FW(TO_CPU_FW_CPU_ONLY) | R01_BPDU_FR |
++ R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ TO_CPU_FW_CPU_ONLY);
+
+ /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
+ * them VLAN-untagged.
+ */
+ mt7530_rmw(priv, MT753X_RGAC2,
+- MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
+- MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
+- MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
+- MT753X_R0E_BPDU_FR |
+- MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_R03_BPDU_FR |
+- MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ R0E_BPDU_FR | R0E_EG_TAG_MASK | R0E_PORT_FW_MASK |
++ R03_BPDU_FR | R03_EG_TAG_MASK | R03_PORT_FW_MASK,
++ R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ R0E_PORT_FW(TO_CPU_FW_CPU_ONLY) | R03_BPDU_FR |
++ R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ TO_CPU_FW_CPU_ONLY);
+ }
+
+ static void
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -67,47 +67,47 @@ enum mt753x_id {
+ #define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+ MT7531_MIRROR_MASK : MIRROR_MASK)
+
+-/* Registers for BPDU and PAE frame control*/
++/* Register for BPDU and PAE frame control */
+ #define MT753X_BPC 0x24
+-#define MT753X_PAE_BPDU_FR BIT(25)
+-#define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22)
+-#define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
+-#define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16)
+-#define MT753X_PAE_PORT_FW(x) FIELD_PREP(MT753X_PAE_PORT_FW_MASK, x)
+-#define MT753X_BPDU_EG_TAG_MASK GENMASK(8, 6)
+-#define MT753X_BPDU_EG_TAG(x) FIELD_PREP(MT753X_BPDU_EG_TAG_MASK, x)
+-#define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0)
++#define PAE_BPDU_FR BIT(25)
++#define PAE_EG_TAG_MASK GENMASK(24, 22)
++#define PAE_EG_TAG(x) FIELD_PREP(PAE_EG_TAG_MASK, x)
++#define PAE_PORT_FW_MASK GENMASK(18, 16)
++#define PAE_PORT_FW(x) FIELD_PREP(PAE_PORT_FW_MASK, x)
++#define BPDU_EG_TAG_MASK GENMASK(8, 6)
++#define BPDU_EG_TAG(x) FIELD_PREP(BPDU_EG_TAG_MASK, x)
++#define BPDU_PORT_FW_MASK GENMASK(2, 0)
+
+-/* Register for :01 and :02 MAC DA frame control */
++/* Register for 01-80-C2-00-00-[01,02] MAC DA frame control */
+ #define MT753X_RGAC1 0x28
+-#define MT753X_R02_BPDU_FR BIT(25)
+-#define MT753X_R02_EG_TAG_MASK GENMASK(24, 22)
+-#define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
+-#define MT753X_R02_PORT_FW_MASK GENMASK(18, 16)
+-#define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
+-#define MT753X_R01_BPDU_FR BIT(9)
+-#define MT753X_R01_EG_TAG_MASK GENMASK(8, 6)
+-#define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
+-#define MT753X_R01_PORT_FW_MASK GENMASK(2, 0)
++#define R02_BPDU_FR BIT(25)
++#define R02_EG_TAG_MASK GENMASK(24, 22)
++#define R02_EG_TAG(x) FIELD_PREP(R02_EG_TAG_MASK, x)
++#define R02_PORT_FW_MASK GENMASK(18, 16)
++#define R02_PORT_FW(x) FIELD_PREP(R02_PORT_FW_MASK, x)
++#define R01_BPDU_FR BIT(9)
++#define R01_EG_TAG_MASK GENMASK(8, 6)
++#define R01_EG_TAG(x) FIELD_PREP(R01_EG_TAG_MASK, x)
++#define R01_PORT_FW_MASK GENMASK(2, 0)
+
+-/* Register for :03 and :0E MAC DA frame control */
++/* Register for 01-80-C2-00-00-[03,0E] MAC DA frame control */
+ #define MT753X_RGAC2 0x2c
+-#define MT753X_R0E_BPDU_FR BIT(25)
+-#define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22)
+-#define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
+-#define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16)
+-#define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
+-#define MT753X_R03_BPDU_FR BIT(9)
+-#define MT753X_R03_EG_TAG_MASK GENMASK(8, 6)
+-#define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
+-#define MT753X_R03_PORT_FW_MASK GENMASK(2, 0)
++#define R0E_BPDU_FR BIT(25)
++#define R0E_EG_TAG_MASK GENMASK(24, 22)
++#define R0E_EG_TAG(x) FIELD_PREP(R0E_EG_TAG_MASK, x)
++#define R0E_PORT_FW_MASK GENMASK(18, 16)
++#define R0E_PORT_FW(x) FIELD_PREP(R0E_PORT_FW_MASK, x)
++#define R03_BPDU_FR BIT(9)
++#define R03_EG_TAG_MASK GENMASK(8, 6)
++#define R03_EG_TAG(x) FIELD_PREP(R03_EG_TAG_MASK, x)
++#define R03_PORT_FW_MASK GENMASK(2, 0)
+
+-enum mt753x_bpdu_port_fw {
+- MT753X_BPDU_FOLLOW_MFC,
+- MT753X_BPDU_CPU_EXCLUDE = 4,
+- MT753X_BPDU_CPU_INCLUDE = 5,
+- MT753X_BPDU_CPU_ONLY = 6,
+- MT753X_BPDU_DROP = 7,
++enum mt753x_to_cpu_fw {
++ TO_CPU_FW_SYSTEM_DEFAULT,
++ TO_CPU_FW_CPU_EXCLUDE = 4,
++ TO_CPU_FW_CPU_INCLUDE = 5,
++ TO_CPU_FW_CPU_ONLY = 6,
++ TO_CPU_FW_DROP = 7,
+ };
+
+ /* Registers for address table access */
--- /dev/null
+From 1dbc1bdc2869e6d2929235c70d64e393aa5a5fa2 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:12 +0300
+Subject: [PATCH 05/15] net: dsa: mt7530: refactor MT7530_MFC and MT7531_CFC,
+ add MT7531_QRY_FFP
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7530_MFC register is on MT7530, MT7531, and the switch on the MT7988
+SoC. Rename it to MT753X_MFC. Bit 7 to 0 differs between MT7530 and
+MT7531/MT7988. Add MT7530 prefix to these definitions, and define the
+IGMP/MLD Query Frame Flooding Ports mask for MT7531.
+
+Rename the cases of MIRROR_MASK to MIRROR_PORT_MASK.
+
+Move mt753x_mirror_port_get() and mt753x_port_mirror_set() to mt7530.h as
+macros.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 38 ++++++++--------------
+ drivers/net/dsa/mt7530.h | 69 +++++++++++++++++++++++++---------------
+ 2 files changed, 57 insertions(+), 50 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1147,7 +1147,7 @@ mt753x_cpu_port_enable(struct dsa_switch
+ PORT_SPEC_TAG);
+
+ /* Enable flooding on the CPU port */
+- mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
++ mt7530_set(priv, MT753X_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
+ UNU_FFP(BIT(port)));
+
+ /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
+@@ -1311,15 +1311,15 @@ mt7530_port_bridge_flags(struct dsa_swit
+ flags.val & BR_LEARNING ? 0 : SA_DIS);
+
+ if (flags.mask & BR_FLOOD)
+- mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)),
++ mt7530_rmw(priv, MT753X_MFC, UNU_FFP(BIT(port)),
+ flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0);
+
+ if (flags.mask & BR_MCAST_FLOOD)
+- mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)),
++ mt7530_rmw(priv, MT753X_MFC, UNM_FFP(BIT(port)),
+ flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0);
+
+ if (flags.mask & BR_BCAST_FLOOD)
+- mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)),
++ mt7530_rmw(priv, MT753X_MFC, BC_FFP(BIT(port)),
+ flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0);
+
+ return 0;
+@@ -1855,20 +1855,6 @@ mt7530_port_vlan_del(struct dsa_switch *
+ return 0;
+ }
+
+-static int mt753x_mirror_port_get(unsigned int id, u32 val)
+-{
+- return (id == ID_MT7531 || id == ID_MT7988) ?
+- MT7531_MIRROR_PORT_GET(val) :
+- MIRROR_PORT(val);
+-}
+-
+-static int mt753x_mirror_port_set(unsigned int id, u32 val)
+-{
+- return (id == ID_MT7531 || id == ID_MT7988) ?
+- MT7531_MIRROR_PORT_SET(val) :
+- MIRROR_PORT(val);
+-}
+-
+ static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress, struct netlink_ext_ack *extack)
+@@ -1884,14 +1870,14 @@ static int mt753x_port_mirror_add(struct
+ val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
+
+ /* MT7530 only supports one monitor port */
+- monitor_port = mt753x_mirror_port_get(priv->id, val);
++ monitor_port = MT753X_MIRROR_PORT_GET(priv->id, val);
+ if (val & MT753X_MIRROR_EN(priv->id) &&
+ monitor_port != mirror->to_local_port)
+ return -EEXIST;
+
+ val |= MT753X_MIRROR_EN(priv->id);
+- val &= ~MT753X_MIRROR_MASK(priv->id);
+- val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port);
++ val &= ~MT753X_MIRROR_PORT_MASK(priv->id);
++ val |= MT753X_MIRROR_PORT_SET(priv->id, mirror->to_local_port);
+ mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
+
+ val = mt7530_read(priv, MT7530_PCR_P(port));
+@@ -2533,7 +2519,7 @@ mt7531_setup_common(struct dsa_switch *d
+ mt7530_mib_reset(ds);
+
+ /* Disable flooding on all ports */
+- mt7530_clear(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK |
++ mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
+ UNU_FFP_MASK);
+
+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
+@@ -3089,10 +3075,12 @@ mt753x_conduit_state_change(struct dsa_s
+ else
+ priv->active_cpu_ports &= ~mask;
+
+- if (priv->active_cpu_ports)
+- val = CPU_EN | CPU_PORT(__ffs(priv->active_cpu_ports));
++ if (priv->active_cpu_ports) {
++ val = MT7530_CPU_EN |
++ MT7530_CPU_PORT(__ffs(priv->active_cpu_ports));
++ }
+
+- mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val);
++ mt7530_rmw(priv, MT753X_MFC, MT7530_CPU_EN | MT7530_CPU_PORT_MASK, val);
+ }
+
+ static int mt7988_setup(struct dsa_switch *ds)
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -36,36 +36,55 @@ enum mt753x_id {
+ #define MT753X_AGC 0xc
+ #define LOCAL_EN BIT(7)
+
+-/* Registers to mac forward control for unknown frames */
+-#define MT7530_MFC 0x10
+-#define BC_FFP(x) (((x) & 0xff) << 24)
+-#define BC_FFP_MASK BC_FFP(~0)
+-#define UNM_FFP(x) (((x) & 0xff) << 16)
+-#define UNM_FFP_MASK UNM_FFP(~0)
+-#define UNU_FFP(x) (((x) & 0xff) << 8)
+-#define UNU_FFP_MASK UNU_FFP(~0)
+-#define CPU_EN BIT(7)
+-#define CPU_PORT_MASK GENMASK(6, 4)
+-#define CPU_PORT(x) FIELD_PREP(CPU_PORT_MASK, x)
+-#define MIRROR_EN BIT(3)
+-#define MIRROR_PORT(x) ((x) & 0x7)
+-#define MIRROR_MASK 0x7
++/* Register for MAC forward control */
++#define MT753X_MFC 0x10
++#define BC_FFP_MASK GENMASK(31, 24)
++#define BC_FFP(x) FIELD_PREP(BC_FFP_MASK, x)
++#define UNM_FFP_MASK GENMASK(23, 16)
++#define UNM_FFP(x) FIELD_PREP(UNM_FFP_MASK, x)
++#define UNU_FFP_MASK GENMASK(15, 8)
++#define UNU_FFP(x) FIELD_PREP(UNU_FFP_MASK, x)
++#define MT7530_CPU_EN BIT(7)
++#define MT7530_CPU_PORT_MASK GENMASK(6, 4)
++#define MT7530_CPU_PORT(x) FIELD_PREP(MT7530_CPU_PORT_MASK, x)
++#define MT7530_MIRROR_EN BIT(3)
++#define MT7530_MIRROR_PORT_MASK GENMASK(2, 0)
++#define MT7530_MIRROR_PORT_GET(x) FIELD_GET(MT7530_MIRROR_PORT_MASK, x)
++#define MT7530_MIRROR_PORT_SET(x) FIELD_PREP(MT7530_MIRROR_PORT_MASK, x)
++#define MT7531_QRY_FFP_MASK GENMASK(7, 0)
++#define MT7531_QRY_FFP(x) FIELD_PREP(MT7531_QRY_FFP_MASK, x)
+
+-/* Registers for CPU forward control */
++/* Register for CPU forward control */
+ #define MT7531_CFC 0x4
+ #define MT7531_MIRROR_EN BIT(19)
+-#define MT7531_MIRROR_MASK (MIRROR_MASK << 16)
+-#define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK)
+-#define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16)
++#define MT7531_MIRROR_PORT_MASK GENMASK(18, 16)
++#define MT7531_MIRROR_PORT_GET(x) FIELD_GET(MT7531_MIRROR_PORT_MASK, x)
++#define MT7531_MIRROR_PORT_SET(x) FIELD_PREP(MT7531_MIRROR_PORT_MASK, x)
+ #define MT7531_CPU_PMAP_MASK GENMASK(7, 0)
+ #define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
+
+-#define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+- MT7531_CFC : MT7530_MFC)
+-#define MT753X_MIRROR_EN(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+- MT7531_MIRROR_EN : MIRROR_EN)
+-#define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+- MT7531_MIRROR_MASK : MIRROR_MASK)
++#define MT753X_MIRROR_REG(id) ((id == ID_MT7531 || \
++ id == ID_MT7988) ? \
++ MT7531_CFC : MT753X_MFC)
++
++#define MT753X_MIRROR_EN(id) ((id == ID_MT7531 || \
++ id == ID_MT7988) ? \
++ MT7531_MIRROR_EN : MT7530_MIRROR_EN)
++
++#define MT753X_MIRROR_PORT_MASK(id) ((id == ID_MT7531 || \
++ id == ID_MT7988) ? \
++ MT7531_MIRROR_PORT_MASK : \
++ MT7530_MIRROR_PORT_MASK)
++
++#define MT753X_MIRROR_PORT_GET(id, val) ((id == ID_MT7531 || \
++ id == ID_MT7988) ? \
++ MT7531_MIRROR_PORT_GET(val) : \
++ MT7530_MIRROR_PORT_GET(val))
++
++#define MT753X_MIRROR_PORT_SET(id, val) ((id == ID_MT7531 || \
++ id == ID_MT7988) ? \
++ MT7531_MIRROR_PORT_SET(val) : \
++ MT7530_MIRROR_PORT_SET(val))
+
+ /* Register for BPDU and PAE frame control */
+ #define MT753X_BPC 0x24
--- /dev/null
+From 3ccf67597d35c06a7319e407b1c42f78a7966779 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:13 +0300
+Subject: [PATCH 06/15] net: dsa: mt7530: refactor MT7530_HWTRAP and
+ MT7530_MHWTRAP
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7530_HWTRAP and MT7530_MHWTRAP registers are on MT7530 and MT7531.
+It's called hardware trap on MT7530, software trap on MT7531. That's
+because some bits of the trap on MT7530 cannot be modified by software
+whilst all bits of the trap on MT7531 can. Rename the definitions for them
+to MT753X_TRAP and MT753X_MTRAP. Add MT7530 and MT7531 prefixes to the
+definitions specific to the switch model.
+
+Remove the extra parentheses from MT7530_XTAL_40MHZ and MT7530_XTAL_20MHZ.
+
+Rename MHWTRAP_PHY0_SEL, MHWTRAP_MANUAL, and MHWTRAP_PHY_ACCESS to be on
+par with the "MT7621 Giga Switch Programming Guide v0.3" document.
+
+Make an enumaration for the XTAL frequency. Set the data type of the xtal
+variable on mt7531_pll_setup() to it.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 59 ++++++++++++++++++++--------------------
+ drivers/net/dsa/mt7530.h | 50 ++++++++++++++++------------------
+ 2 files changed, 54 insertions(+), 55 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -417,23 +417,23 @@ mt7530_setup_port6(struct dsa_switch *ds
+
+ mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1));
+
+- xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
++ xtal = mt7530_read(priv, MT753X_MTRAP) & MT7530_XTAL_MASK;
+
+- if (xtal == HWTRAP_XTAL_25MHZ)
++ if (xtal == MT7530_XTAL_25MHZ)
+ ssc_delta = 0x57;
+ else
+ ssc_delta = 0x87;
+
+ if (priv->id == ID_MT7621) {
+ /* PLL frequency: 125MHz: 1.0GBit */
+- if (xtal == HWTRAP_XTAL_40MHZ)
++ if (xtal == MT7530_XTAL_40MHZ)
+ ncpo1 = 0x0640;
+- if (xtal == HWTRAP_XTAL_25MHZ)
++ if (xtal == MT7530_XTAL_25MHZ)
+ ncpo1 = 0x0a00;
+ } else { /* PLL frequency: 250MHz: 2.0Gbit */
+- if (xtal == HWTRAP_XTAL_40MHZ)
++ if (xtal == MT7530_XTAL_40MHZ)
+ ncpo1 = 0x0c80;
+- if (xtal == HWTRAP_XTAL_25MHZ)
++ if (xtal == MT7530_XTAL_25MHZ)
+ ncpo1 = 0x1400;
+ }
+
+@@ -456,19 +456,20 @@ mt7530_setup_port6(struct dsa_switch *ds
+ static void
+ mt7531_pll_setup(struct mt7530_priv *priv)
+ {
++ enum mt7531_xtal_fsel xtal;
+ u32 top_sig;
+ u32 hwstrap;
+- u32 xtal;
+ u32 val;
+
+ val = mt7530_read(priv, MT7531_CREV);
+ top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
+- hwstrap = mt7530_read(priv, MT7531_HWTRAP);
++ hwstrap = mt7530_read(priv, MT753X_TRAP);
+ if ((val & CHIP_REV_M) > 0)
+- xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ :
+- HWTRAP_XTAL_FSEL_25MHZ;
++ xtal = (top_sig & PAD_MCM_SMI_EN) ? MT7531_XTAL_FSEL_40MHZ :
++ MT7531_XTAL_FSEL_25MHZ;
+ else
+- xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK;
++ xtal = (hwstrap & MT7531_XTAL25) ? MT7531_XTAL_FSEL_25MHZ :
++ MT7531_XTAL_FSEL_40MHZ;
+
+ /* Step 1 : Disable MT7531 COREPLL */
+ val = mt7530_read(priv, MT7531_PLLGP_EN);
+@@ -497,13 +498,13 @@ mt7531_pll_setup(struct mt7530_priv *pri
+ usleep_range(25, 35);
+
+ switch (xtal) {
+- case HWTRAP_XTAL_FSEL_25MHZ:
++ case MT7531_XTAL_FSEL_25MHZ:
+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ val &= ~RG_COREPLL_SDM_PCW_M;
+ val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
+ break;
+- case HWTRAP_XTAL_FSEL_40MHZ:
++ case MT7531_XTAL_FSEL_40MHZ:
+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ val &= ~RG_COREPLL_SDM_PCW_M;
+ val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
+@@ -877,20 +878,20 @@ static void mt7530_setup_port5(struct ds
+
+ mutex_lock(&priv->reg_mutex);
+
+- val = mt7530_read(priv, MT7530_MHWTRAP);
++ val = mt7530_read(priv, MT753X_MTRAP);
+
+- val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
+- val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
++ val |= MT7530_CHG_TRAP | MT7530_P5_MAC_SEL | MT7530_P5_DIS;
++ val &= ~MT7530_P5_RGMII_MODE & ~MT7530_P5_PHY0_SEL;
+
+ switch (priv->p5_mode) {
+ /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
+ case MUX_PHY_P0:
+- val |= MHWTRAP_PHY0_SEL;
++ val |= MT7530_P5_PHY0_SEL;
+ fallthrough;
+
+ /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
+ case MUX_PHY_P4:
+- val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
++ val &= ~MT7530_P5_MAC_SEL & ~MT7530_P5_DIS;
+
+ /* Setup the MAC by default for the cpu port */
+ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
+@@ -898,13 +899,13 @@ static void mt7530_setup_port5(struct ds
+
+ /* GMAC5: P5 -> SoC MAC or external PHY */
+ default:
+- val &= ~MHWTRAP_P5_DIS;
++ val &= ~MT7530_P5_DIS;
+ break;
+ }
+
+ /* Setup RGMII settings */
+ if (phy_interface_mode_is_rgmii(interface)) {
+- val |= MHWTRAP_P5_RGMII_MODE;
++ val |= MT7530_P5_RGMII_MODE;
+
+ /* P5 RGMII RX Clock Control: delay setting for 1000M */
+ mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
+@@ -924,7 +925,7 @@ static void mt7530_setup_port5(struct ds
+ P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
+ }
+
+- mt7530_write(priv, MT7530_MHWTRAP, val);
++ mt7530_write(priv, MT753X_MTRAP, val);
+
+ dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
+ mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
+@@ -2365,7 +2366,7 @@ mt7530_setup(struct dsa_switch *ds)
+ }
+
+ /* Waiting for MT7530 got to stable */
+- INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
++ INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
+ ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
+ 20, 1000000);
+ if (ret < 0) {
+@@ -2380,7 +2381,7 @@ mt7530_setup(struct dsa_switch *ds)
+ return -ENODEV;
+ }
+
+- if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) {
++ if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_20MHZ) {
+ dev_err(priv->dev,
+ "MT7530 with a 20MHz XTAL is not supported!\n");
+ return -EINVAL;
+@@ -2401,12 +2402,12 @@ mt7530_setup(struct dsa_switch *ds)
+ RD_TAP_MASK, RD_TAP(16));
+
+ /* Enable port 6 */
+- val = mt7530_read(priv, MT7530_MHWTRAP);
+- val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
+- val |= MHWTRAP_MANUAL;
+- mt7530_write(priv, MT7530_MHWTRAP, val);
++ val = mt7530_read(priv, MT753X_MTRAP);
++ val &= ~MT7530_P6_DIS & ~MT7530_PHY_INDIRECT_ACCESS;
++ val |= MT7530_CHG_TRAP;
++ mt7530_write(priv, MT753X_MTRAP, val);
+
+- if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
++ if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
+ mt7530_pll_setup(priv);
+
+ mt753x_trap_frames(priv);
+@@ -2586,7 +2587,7 @@ mt7531_setup(struct dsa_switch *ds)
+ }
+
+ /* Waiting for MT7530 got to stable */
+- INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
++ INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
+ ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
+ 20, 1000000);
+ if (ret < 0) {
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -495,32 +495,30 @@ enum mt7531_clk_skew {
+ MT7531_CLK_SKEW_REVERSE = 3,
+ };
+
+-/* Register for hw trap status */
+-#define MT7530_HWTRAP 0x7800
+-#define HWTRAP_XTAL_MASK (BIT(10) | BIT(9))
+-#define HWTRAP_XTAL_25MHZ (BIT(10) | BIT(9))
+-#define HWTRAP_XTAL_40MHZ (BIT(10))
+-#define HWTRAP_XTAL_20MHZ (BIT(9))
++/* Register for trap status */
++#define MT753X_TRAP 0x7800
++#define MT7530_XTAL_MASK (BIT(10) | BIT(9))
++#define MT7530_XTAL_25MHZ (BIT(10) | BIT(9))
++#define MT7530_XTAL_40MHZ BIT(10)
++#define MT7530_XTAL_20MHZ BIT(9)
++#define MT7531_XTAL25 BIT(7)
+
+-#define MT7531_HWTRAP 0x7800
+-#define HWTRAP_XTAL_FSEL_MASK BIT(7)
+-#define HWTRAP_XTAL_FSEL_25MHZ BIT(7)
+-#define HWTRAP_XTAL_FSEL_40MHZ 0
+-/* Unique fields of (M)HWSTRAP for MT7531 */
+-#define XTAL_FSEL_S 7
+-#define XTAL_FSEL_M BIT(7)
+-#define PHY_EN BIT(6)
+-#define CHG_STRAP BIT(8)
++/* Register for trap modification */
++#define MT753X_MTRAP 0x7804
++#define MT7530_P5_PHY0_SEL BIT(20)
++#define MT7530_CHG_TRAP BIT(16)
++#define MT7530_P5_MAC_SEL BIT(13)
++#define MT7530_P6_DIS BIT(8)
++#define MT7530_P5_RGMII_MODE BIT(7)
++#define MT7530_P5_DIS BIT(6)
++#define MT7530_PHY_INDIRECT_ACCESS BIT(5)
++#define MT7531_CHG_STRAP BIT(8)
++#define MT7531_PHY_EN BIT(6)
+
+-/* Register for hw trap modification */
+-#define MT7530_MHWTRAP 0x7804
+-#define MHWTRAP_PHY0_SEL BIT(20)
+-#define MHWTRAP_MANUAL BIT(16)
+-#define MHWTRAP_P5_MAC_SEL BIT(13)
+-#define MHWTRAP_P6_DIS BIT(8)
+-#define MHWTRAP_P5_RGMII_MODE BIT(7)
+-#define MHWTRAP_P5_DIS BIT(6)
+-#define MHWTRAP_PHY_ACCESS BIT(5)
++enum mt7531_xtal_fsel {
++ MT7531_XTAL_FSEL_25MHZ,
++ MT7531_XTAL_FSEL_40MHZ,
++};
+
+ /* Register for TOP signal control */
+ #define MT7530_TOP_SIG_CTRL 0x7808
--- /dev/null
+From 2982f395c9a513b168f1e685588f70013cba2f5f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:14 +0300
+Subject: [PATCH 07/15] net: dsa: mt7530: move MT753X_MTRAP operations for
+ MT7530
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+On MT7530, the media-independent interfaces of port 5 and 6 are controlled
+by the MT7530_P5_DIS and MT7530_P6_DIS bits of the hardware trap. Deal with
+these bits only when the relevant port is being enabled or disabled. This
+ensures that these ports will be disabled when they are not in use.
+
+Do not set MT7530_CHG_TRAP on mt7530_setup_port5() as that's already being
+done on mt7530_setup().
+
+Instead of globally setting MT7530_P5_MAC_SEL, clear it, then set it only
+on the appropriate case.
+
+If PHY muxing is detected, clear MT7530_P5_DIS before calling
+mt7530_setup_port5().
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 38 +++++++++++++++++++++++++++-----------
+ 1 file changed, 27 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -880,8 +880,7 @@ static void mt7530_setup_port5(struct ds
+
+ val = mt7530_read(priv, MT753X_MTRAP);
+
+- val |= MT7530_CHG_TRAP | MT7530_P5_MAC_SEL | MT7530_P5_DIS;
+- val &= ~MT7530_P5_RGMII_MODE & ~MT7530_P5_PHY0_SEL;
++ val &= ~MT7530_P5_PHY0_SEL & ~MT7530_P5_MAC_SEL & ~MT7530_P5_RGMII_MODE;
+
+ switch (priv->p5_mode) {
+ /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
+@@ -891,15 +890,13 @@ static void mt7530_setup_port5(struct ds
+
+ /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
+ case MUX_PHY_P4:
+- val &= ~MT7530_P5_MAC_SEL & ~MT7530_P5_DIS;
+-
+ /* Setup the MAC by default for the cpu port */
+ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
+ break;
+
+ /* GMAC5: P5 -> SoC MAC or external PHY */
+ default:
+- val &= ~MT7530_P5_DIS;
++ val |= MT7530_P5_MAC_SEL;
+ break;
+ }
+
+@@ -1193,6 +1190,14 @@ mt7530_port_enable(struct dsa_switch *ds
+
+ mutex_unlock(&priv->reg_mutex);
+
++ if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
++ return 0;
++
++ if (port == 5)
++ mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
++ else if (port == 6)
++ mt7530_clear(priv, MT753X_MTRAP, MT7530_P6_DIS);
++
+ return 0;
+ }
+
+@@ -1211,6 +1216,14 @@ mt7530_port_disable(struct dsa_switch *d
+ PCR_MATRIX_CLR);
+
+ mutex_unlock(&priv->reg_mutex);
++
++ if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
++ return;
++
++ if (port == 5)
++ mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
++ else if (port == 6)
++ mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
+ }
+
+ static int
+@@ -2401,11 +2414,11 @@ mt7530_setup(struct dsa_switch *ds)
+ mt7530_rmw(priv, MT7530_TRGMII_RD(i),
+ RD_TAP_MASK, RD_TAP(16));
+
+- /* Enable port 6 */
+- val = mt7530_read(priv, MT753X_MTRAP);
+- val &= ~MT7530_P6_DIS & ~MT7530_PHY_INDIRECT_ACCESS;
+- val |= MT7530_CHG_TRAP;
+- mt7530_write(priv, MT753X_MTRAP, val);
++ /* Allow modifying the trap and directly access PHY registers via the
++ * MDIO bus the switch is on.
++ */
++ mt7530_rmw(priv, MT753X_MTRAP, MT7530_CHG_TRAP |
++ MT7530_PHY_INDIRECT_ACCESS, MT7530_CHG_TRAP);
+
+ if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
+ mt7530_pll_setup(priv);
+@@ -2488,8 +2501,11 @@ mt7530_setup(struct dsa_switch *ds)
+ break;
+ }
+
+- if (priv->p5_mode == MUX_PHY_P0 || priv->p5_mode == MUX_PHY_P4)
++ if (priv->p5_mode == MUX_PHY_P0 ||
++ priv->p5_mode == MUX_PHY_P4) {
++ mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ mt7530_setup_port5(ds, interface);
++ }
+ }
+
+ #ifdef CONFIG_GPIOLIB
--- /dev/null
+From 1f5669efca65564c7533704917f79003c6b36c9c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:15 +0300
+Subject: [PATCH 08/15] net: dsa: mt7530: return mt7530_setup_mdio &
+ mt7531_setup_common on error
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The mt7530_setup_mdio() and mt7531_setup_common() functions should be
+checked for errors. Return if the functions return a non-zero value.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2667,7 +2667,9 @@ mt7531_setup(struct dsa_switch *ds)
+ 0);
+ }
+
+- mt7531_setup_common(ds);
++ ret = mt7531_setup_common(ds);
++ if (ret)
++ return ret;
+
+ /* Setup VLAN ID 0 for VLAN-unaware bridges */
+ ret = mt7530_setup_vlan0(priv);
+@@ -3020,6 +3022,8 @@ mt753x_setup(struct dsa_switch *ds)
+ ret = mt7530_setup_mdio(priv);
+ if (ret && priv->irq)
+ mt7530_free_irq_common(priv);
++ if (ret)
++ return ret;
+
+ /* Initialise the PCS devices */
+ for (i = 0; i < priv->ds->num_ports; i++) {
--- /dev/null
+From 6cc2d4ccd77509df74b7b8ef46bbc6ba0a571318 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:16 +0300
+Subject: [PATCH 09/15] net: dsa: mt7530: define MAC speed capabilities per
+ switch model
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+With the support of the MT7988 SoC switch, the MAC speed capabilities
+defined on mt753x_phylink_get_caps() won't apply to all switch models
+anymore. Move them to more appropriate locations instead of overwriting
+config->mac_capabilities.
+
+Remove the comment on mt753x_phylink_get_caps() as it's become invalid with
+the support of MT7531 and MT7988 SoC switch.
+
+Add break to case 6 of mt7988_mac_port_get_caps() to be explicit.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 15 ++++++++++-----
+ 1 file changed, 10 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2685,6 +2685,8 @@ mt7531_setup(struct dsa_switch *ds)
+ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+ {
++ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
++
+ switch (port) {
+ /* Ports which are connected to switch PHYs. There is no MII pinout. */
+ case 0 ... 4:
+@@ -2716,6 +2718,8 @@ static void mt7531_mac_port_get_caps(str
+ {
+ struct mt7530_priv *priv = ds->priv;
+
++ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
++
+ switch (port) {
+ /* Ports which are connected to switch PHYs. There is no MII pinout. */
+ case 0 ... 4:
+@@ -2755,14 +2759,17 @@ static void mt7988_mac_port_get_caps(str
+ case 0 ... 3:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
++
++ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+ break;
+
+ /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */
+ case 6:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+- config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+- MAC_10000FD;
++
++ config->mac_capabilities |= MAC_10000FD;
++ break;
+ }
+ }
+
+@@ -2932,9 +2939,7 @@ static void mt753x_phylink_get_caps(stru
+ {
+ struct mt7530_priv *priv = ds->priv;
+
+- /* This switch only supports full-duplex at 1Gbps */
+- config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+- MAC_10 | MAC_100 | MAC_1000FD;
++ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
+
+ priv->info->mac_port_get_caps(ds, port, config);
+ }
--- /dev/null
+From dd0f15fc877c10567699190bce0f55e96f4ad6b5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:17 +0300
+Subject: [PATCH 10/15] net: dsa: mt7530: get rid of function sanity check
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Get rid of checking whether functions are filled properly. priv->info which
+is an mt753x_info structure is filled and checked for before this check.
+It's unnecessary checking whether it's filled properly.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 7 -------
+ 1 file changed, 7 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -3232,13 +3232,6 @@ mt7530_probe_common(struct mt7530_priv *
+ if (!priv->info)
+ return -EINVAL;
+
+- /* Sanity check if these required device operations are filled
+- * properly.
+- */
+- if (!priv->info->sw_setup || !priv->info->phy_read_c22 ||
+- !priv->info->phy_write_c22 || !priv->info->mac_port_get_caps)
+- return -EINVAL;
+-
+ priv->id = priv->info->id;
+ priv->dev = dev;
+ priv->ds->priv = priv;
--- /dev/null
+From 2dff9759602b069f97ccc939e15a47ca051b2983 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:18 +0300
+Subject: [PATCH 11/15] net: dsa: mt7530: refactor MT7530_PMEEECR_P()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7530_PMEEECR_P() register is on MT7530, MT7531, and the switch on the
+MT7988 SoC. Rename the definition for them to MT753X_PMEEECR_P(). Use the
+FIELD_PREP and FIELD_GET macros. Rename GET_LPI_THRESH() and
+SET_LPI_THRESH() to LPI_THRESH_GET() and LPI_THRESH_SET().
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 8 ++++----
+ drivers/net/dsa/mt7530.h | 13 +++++++------
+ 2 files changed, 11 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -3051,10 +3051,10 @@ static int mt753x_get_mac_eee(struct dsa
+ struct ethtool_eee *e)
+ {
+ struct mt7530_priv *priv = ds->priv;
+- u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
++ u32 eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
+
+ e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
+- e->tx_lpi_timer = GET_LPI_THRESH(eeecr);
++ e->tx_lpi_timer = LPI_THRESH_GET(eeecr);
+
+ return 0;
+ }
+@@ -3068,11 +3068,11 @@ static int mt753x_set_mac_eee(struct dsa
+ if (e->tx_lpi_timer > 0xFFF)
+ return -EINVAL;
+
+- set = SET_LPI_THRESH(e->tx_lpi_timer);
++ set = LPI_THRESH_SET(e->tx_lpi_timer);
+ if (!e->tx_lpi_enabled)
+ /* Force LPI Mode without a delay */
+ set |= LPI_MODE_EN;
+- mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set);
++ mt7530_rmw(priv, MT753X_PMEEECR_P(port), mask, set);
+
+ return 0;
+ }
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -364,13 +364,14 @@ enum mt7530_vlan_port_acc_frm {
+ PMCR_FORCE_SPEED_100 | \
+ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
+
+-#define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
+-#define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24)
+-#define WAKEUP_TIME_100(x) (((x) & 0xFF) << 16)
++#define MT753X_PMEEECR_P(x) (0x3004 + (x) * 0x100)
++#define WAKEUP_TIME_1000_MASK GENMASK(31, 24)
++#define WAKEUP_TIME_1000(x) FIELD_PREP(WAKEUP_TIME_1000_MASK, x)
++#define WAKEUP_TIME_100_MASK GENMASK(23, 16)
++#define WAKEUP_TIME_100(x) FIELD_PREP(WAKEUP_TIME_100_MASK, x)
+ #define LPI_THRESH_MASK GENMASK(15, 4)
+-#define LPI_THRESH_SHT 4
+-#define SET_LPI_THRESH(x) (((x) << LPI_THRESH_SHT) & LPI_THRESH_MASK)
+-#define GET_LPI_THRESH(x) (((x) & LPI_THRESH_MASK) >> LPI_THRESH_SHT)
++#define LPI_THRESH_GET(x) FIELD_GET(LPI_THRESH_MASK, x)
++#define LPI_THRESH_SET(x) FIELD_PREP(LPI_THRESH_MASK, x)
+ #define LPI_MODE_EN BIT(0)
+
+ #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100)
--- /dev/null
+From 21d67c2fabfe40baf33202d3287b67b6c16f8382 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:19 +0300
+Subject: [PATCH 12/15] net: dsa: mt7530: get rid of mac_port_validate member
+ of mt753x_info
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The mac_port_validate member of the mt753x_info structure is not being
+used, remove it. Improve the member description section in the process.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.h | 10 +++-------
+ 1 file changed, 3 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -743,15 +743,14 @@ struct mt753x_pcs {
+
+ /* struct mt753x_info - This is the main data structure for holding the specific
+ * part for each supported device
++ * @id: Holding the identifier to a switch model
++ * @pcs_ops: Holding the pointer to the MAC PCS operations structure
+ * @sw_setup: Holding the handler to a device initialization
+ * @phy_read_c22: Holding the way reading PHY port using C22
+ * @phy_write_c22: Holding the way writing PHY port using C22
+ * @phy_read_c45: Holding the way reading PHY port using C45
+ * @phy_write_c45: Holding the way writing PHY port using C45
+- * @phy_mode_supported: Check if the PHY type is being supported on a certain
+- * port
+- * @mac_port_validate: Holding the way to set addition validate type for a
+- * certan MAC port
++ * @mac_port_get_caps: Holding the handler that provides MAC capabilities
+ * @mac_port_config: Holding the way setting up the PHY attribute to a
+ * certain MAC port
+ */
+@@ -770,9 +769,6 @@ struct mt753x_info {
+ int regnum, u16 val);
+ void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
+ struct phylink_config *config);
+- void (*mac_port_validate)(struct dsa_switch *ds, int port,
+- phy_interface_t interface,
+- unsigned long *supported);
+ void (*mac_port_config)(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface);
--- /dev/null
+From 6efc8ae3eb0363328f479191a0cf0dc12a16e090 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:20 +0300
+Subject: [PATCH 13/15] net: dsa: mt7530: use priv->ds->num_ports instead of
+ MT7530_NUM_PORTS
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Use priv->ds->num_ports on all for loops which configure the switch
+registers. In the future, the value of MT7530_NUM_PORTS will depend on
+priv->id. Therefore, this change prepares the subdriver for a simpler
+implementation.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1411,7 +1411,7 @@ mt7530_port_set_vlan_unaware(struct dsa_
+ mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
+ G0_PORT_VID_DEF);
+
+- for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ for (i = 0; i < priv->ds->num_ports; i++) {
+ if (dsa_is_user_port(ds, i) &&
+ dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
+ all_user_ports_removed = false;
+@@ -2428,7 +2428,7 @@ mt7530_setup(struct dsa_switch *ds)
+ /* Enable and reset MIB counters */
+ mt7530_mib_reset(ds);
+
+- for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ for (i = 0; i < priv->ds->num_ports; i++) {
+ /* Clear link settings and enable force mode to force link down
+ * on all ports until they're enabled later.
+ */
+@@ -2539,7 +2539,7 @@ mt7531_setup_common(struct dsa_switch *d
+ mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
+ UNU_FFP_MASK);
+
+- for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ for (i = 0; i < priv->ds->num_ports; i++) {
+ /* Clear link settings and enable force mode to force link down
+ * on all ports until they're enabled later.
+ */
+@@ -2626,7 +2626,7 @@ mt7531_setup(struct dsa_switch *ds)
+ priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
+
+ /* Force link down on all ports before internal reset */
+- for (i = 0; i < MT7530_NUM_PORTS; i++)
++ for (i = 0; i < priv->ds->num_ports; i++)
+ mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
+
+ /* Reset the switch through internal reset */
--- /dev/null
+From c078ebbf5f6f6d8390035a9f92eeab766b78884d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:21 +0300
+Subject: [PATCH 14/15] net: dsa: mt7530: do not pass port variable to
+ mt7531_rgmii_setup()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The mt7531_rgmii_setup() function does not use the port variable, do not
+pass the variable to it.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2785,7 +2785,7 @@ mt7530_mac_config(struct dsa_switch *ds,
+ mt7530_setup_port6(priv->ds, interface);
+ }
+
+-static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
++static void mt7531_rgmii_setup(struct mt7530_priv *priv,
+ phy_interface_t interface,
+ struct phy_device *phydev)
+ {
+@@ -2836,7 +2836,7 @@ mt7531_mac_config(struct dsa_switch *ds,
+ if (phy_interface_mode_is_rgmii(interface)) {
+ dp = dsa_to_port(ds, port);
+ phydev = dp->slave->phydev;
+- mt7531_rgmii_setup(priv, port, interface, phydev);
++ mt7531_rgmii_setup(priv, interface, phydev);
+ }
+ }
+
--- /dev/null
+From e7a9cc3cc00b40e0bc2bae40bd2ece0e48fa51d5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 22 Apr 2024 10:15:22 +0300
+Subject: [PATCH 15/15] net: dsa: mt7530: explain exposing MDIO bus of MT7531AE
+ better
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on MT7531AE.
+Therefore, the GPIO 11-12 pins are set to function as MDC and MDIO to
+expose the MDIO bus of the switch. Replace the comment with a better
+explanation.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2635,7 +2635,10 @@ mt7531_setup(struct dsa_switch *ds)
+ if (!priv->p5_sgmii) {
+ mt7531_pll_setup(priv);
+ } else {
+- /* Let ds->slave_mii_bus be able to access external phy. */
++ /* Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on
++ * MT7531AE. Set the GPIO 11-12 pins to function as MDC and MDIO
++ * to expose the MDIO bus of the switch.
++ */
+ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
+ MT7531_EXT_P_MDC_11);
+ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
+++ /dev/null
-From 856e8954a0a88d1a4d2b43e9002b9249131a156f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:08 +0300
-Subject: [PATCH 01/15] net: dsa: mt7530: disable EEE abilities on failure on
- MT7531 and MT7988
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 bits let the
-PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits determine the 1G/100 EEE
-abilities of the MAC. If MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 are
-unset, the abilities are left to be determined by PHY auto polling.
-
-The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
-made it so that the PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits are set on
-mt753x_phylink_mac_link_up(). But it did not set the MT7531_FORCE_EEE1G and
-MT7531_FORCE_EEE100 bits. Because of this, the EEE abilities will be
-determined by PHY auto polling, regardless of the result of phy_init_eee().
-
-Define these bits and add them to the MT7531_FORCE_MODE mask which is set
-in mt7531_setup_common(). With this, there won't be any EEE abilities set
-when phy_init_eee() returns a negative value.
-
-Thanks to Russell for explaining when phy_init_eee() could return a
-negative value below.
-
-Looking at phy_init_eee(), it could return a negative value when:
-
-1. phydev->drv is NULL
-2. if genphy_c45_eee_is_active() returns negative
-3. if genphy_c45_eee_is_active() returns zero, it returns -EPROTONOSUPPORT
-4. if phy_set_bits_mmd() fails (e.g. communication error with the PHY)
-
-If we then look at genphy_c45_eee_is_active(), then:
-
-genphy_c45_read_eee_adv() and genphy_c45_read_eee_lpa() propagate their
-non-zero return values, otherwise this function returns zero or positive
-integer.
-
-If we then look at genphy_c45_read_eee_adv(), then a failure of
-phy_read_mmd() would cause a negative value to be returned.
-
-Looking at genphy_c45_read_eee_lpa(), the same is true.
-
-So, it can be summarised as:
-
-- phydev->drv is NULL
-- there is a communication error accessing the PHY
-- EEE is not active
-
-otherwise, it returns zero on success.
-
-If one wishes to determine whether an error occurred vs EEE not being
-supported through negotiation for the negotiated speed, if it returns
--EPROTONOSUPPORT in the latter case. Other error codes mean either the
-driver has been unloaded or communication error.
-
-In conclusion, determining the EEE abilities by PHY auto polling shouldn't
-result in having any EEE abilities enabled, when one of the last two
-situations in the summary happens. And it seems that if phydev->drv is
-NULL, there would be bigger problems with the device than a broken link. So
-this is not a bugfix.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.h | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -328,11 +328,15 @@ enum mt7530_vlan_port_acc_frm {
- #define MT7531_FORCE_DPX BIT(29)
- #define MT7531_FORCE_RX_FC BIT(28)
- #define MT7531_FORCE_TX_FC BIT(27)
-+#define MT7531_FORCE_EEE100 BIT(26)
-+#define MT7531_FORCE_EEE1G BIT(25)
- #define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
- MT7531_FORCE_SPD | \
- MT7531_FORCE_DPX | \
- MT7531_FORCE_RX_FC | \
-- MT7531_FORCE_TX_FC)
-+ MT7531_FORCE_TX_FC | \
-+ MT7531_FORCE_EEE100 | \
-+ MT7531_FORCE_EEE1G)
- #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
- PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
- PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
--- /dev/null
+From patchwork Sat Apr 27 11:24:42 2024
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 8bit
+X-Patchwork-Submitter: =?utf-8?b?QXLEsW7DpyDDnE5BTCB2aWEgQjQgUmVsYXk=?=
+ <devnull+arinc.unal.arinc9.com@kernel.org>
+X-Patchwork-Id: 13645655
+From: =?utf-8?b?QXLEsW7DpyDDnE5BTCB2aWEgQjQgUmVsYXk=?=
+ <devnull+arinc.unal.arinc9.com@kernel.org>
+Date: Sat, 27 Apr 2024 14:24:42 +0300
+Subject: [PATCH net-next] net: dsa: mt7530: do not set MT7530_P5_DIS when
+ PHY muxing is being used
+Precedence: bulk
+X-Mailing-List: netdev@vger.kernel.org
+List-Id: <netdev.vger.kernel.org>
+List-Subscribe: <mailto:netdev+subscribe@vger.kernel.org>
+List-Unsubscribe: <mailto:netdev+unsubscribe@vger.kernel.org>
+MIME-Version: 1.0
+Message-Id:
+ <20240427-for-netnext-mt7530-do-not-disable-port5-when-phy-muxing-v1-1-793cdf9d7707@arinc9.com>
+To: Daniel Golle <daniel@makrotopia.org>, DENG Qingfang <dqfext@gmail.com>,
+ Sean Wang <sean.wang@mediatek.com>, Andrew Lunn <andrew@lunn.ch>,
+ Florian Fainelli <f.fainelli@gmail.com>,
+ Vladimir Oltean <olteanv@gmail.com>,
+ "David S. Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
+ Matthias Brugger <matthias.bgg@gmail.com>,
+ AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
+ linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org,
+ =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= <arinc.unal@arinc9.com>
+X-Mailer: b4 0.13.0
+X-Patchwork-Delegate: kuba@kernel.org
+
+From: Arınç ÜNAL <arinc.unal@arinc9.com>
+
+When the PHY muxing feature is in use, port 5 won't be defined in the
+device tree. Because of this, the type member of the dsa_port structure for
+this port will be assigned DSA_PORT_TYPE_UNUSED. The dsa_port_setup()
+function calls ds->ops->port_disable() when the port type is
+DSA_PORT_TYPE_UNUSED.
+
+The MT7530_P5_DIS bit is unset when PHY muxing is being used.
+mt7530_port_disable() which is assigned to ds->ops->port_disable() is
+called afterwards. Currently, mt7530_port_disable() sets MT7530_P5_DIS
+which breaks network connectivity when PHY muxing is being used.
+
+Therefore, do not set MT7530_P5_DIS when PHY muxing is being used.
+
+Fixes: 377174c5760c ("net: dsa: mt7530: move MT753X_MTRAP operations for MT7530")
+Reported-by: Daniel Golle <daniel@makrotopia.org>
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+Hello.
+
+I've sent this to net-next as the patch it fixes is on the current
+development cycle.
+---
+ drivers/net/dsa/mt7530.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+
+---
+base-commit: 5c4c0edca68a5841a8d53ccd49596fe199c8334c
+change-id: 20240427-for-netnext-mt7530-do-not-disable-port5-when-phy-muxing-7ff5fd0995d7
+
+Best regards,
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1213,7 +1213,7 @@ mt7530_port_disable(struct dsa_switch *d
+ if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
+ return;
+
+- if (port == 5)
++ if (port == 5 && priv->p5_mode == GMAC5)
+ mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ else if (port == 6)
+ mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
+++ /dev/null
-From 712ad00d2f43814c81a7abfcbc339690a05fb6a0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:09 +0300
-Subject: [PATCH 02/15] net: dsa: mt7530: refactor MT7530_PMCR_P()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_PMCR_P() registers are on MT7530, MT7531, and the switch on the
-MT7988 SoC. Rename the definition for them to MT753X_PMCR_P(). Bit 15 is
-for MT7530 only. Add MT7530 prefix to the definition for bit 15.
-
-Use GENMASK and FIELD_PREP for PMCR_IFG_XMIT().
-
-Rename PMCR_TX_EN and PMCR_RX_EN to PMCR_MAC_TX_EN and PMCR_MAC_TX_EN to
-follow the naming on the "MT7621 Giga Switch Programming Guide v0.3",
-"MT7531 Reference Manual for Development Board v1.0", and "MT7988A Wi-Fi 7
-Generation Router Platform: Datasheet (Open Version) v0.1" documents.
-
-These documents show that PMCR_RX_FC_EN is at bit 5. Correct this along
-with renaming it to PMCR_FORCE_RX_FC_EN, and the same for PMCR_TX_FC_EN.
-
-Remove PMCR_SPEED_MASK which doesn't have a use.
-
-Rename the force mode definitions for MT7531 to FORCE_MODE. Add MASK at the
-end for the mask that includes all force mode definitions.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 24 ++++++++---------
- drivers/net/dsa/mt7530.h | 58 +++++++++++++++++++++-------------------
- 2 files changed, 42 insertions(+), 40 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -889,7 +889,7 @@ static void mt7530_setup_port5(struct ds
- val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
-
- /* Setup the MAC by default for the cpu port */
-- mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
-+ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
- break;
- case P5_INTF_SEL_GMAC5:
- /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
-@@ -2435,8 +2435,8 @@ mt7530_setup(struct dsa_switch *ds)
- /* Clear link settings and enable force mode to force link down
- * on all ports until they're enabled later.
- */
-- mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-- PMCR_FORCE_MODE, PMCR_FORCE_MODE);
-+ mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-+ MT7530_FORCE_MODE, MT7530_FORCE_MODE);
-
- /* Disable forwarding by default on all ports */
- mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
-@@ -2546,8 +2546,8 @@ mt7531_setup_common(struct dsa_switch *d
- /* Clear link settings and enable force mode to force link down
- * on all ports until they're enabled later.
- */
-- mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-- MT7531_FORCE_MODE, MT7531_FORCE_MODE);
-+ mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-+ MT7531_FORCE_MODE_MASK, MT7531_FORCE_MODE_MASK);
-
- /* Disable forwarding by default on all ports */
- mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
-@@ -2630,7 +2630,7 @@ mt7531_setup(struct dsa_switch *ds)
-
- /* Force link down on all ports before internal reset */
- for (i = 0; i < MT7530_NUM_PORTS; i++)
-- mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
-+ mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
-
- /* Reset the switch through internal reset */
- mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
-@@ -2872,7 +2872,7 @@ mt753x_phylink_mac_config(struct phylink
-
- /* Are we connected to external phy */
- if (port == 5 && dsa_is_user_port(ds, 5))
-- mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
-+ mt7530_set(priv, MT753X_PMCR_P(port), PMCR_EXT_PHY);
- }
-
- static void mt753x_phylink_mac_link_down(struct phylink_config *config,
-@@ -2882,7 +2882,7 @@ static void mt753x_phylink_mac_link_down
- struct dsa_port *dp = dsa_phylink_to_port(config);
- struct mt7530_priv *priv = dp->ds->priv;
-
-- mt7530_clear(priv, MT7530_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
-+ mt7530_clear(priv, MT753X_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
- }
-
- static void mt753x_phylink_mac_link_up(struct phylink_config *config,
-@@ -2896,7 +2896,7 @@ static void mt753x_phylink_mac_link_up(s
- struct mt7530_priv *priv = dp->ds->priv;
- u32 mcr;
-
-- mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
-+ mcr = PMCR_MAC_RX_EN | PMCR_MAC_TX_EN | PMCR_FORCE_LNK;
-
- switch (speed) {
- case SPEED_1000:
-@@ -2911,9 +2911,9 @@ static void mt753x_phylink_mac_link_up(s
- if (duplex == DUPLEX_FULL) {
- mcr |= PMCR_FORCE_FDX;
- if (tx_pause)
-- mcr |= PMCR_TX_FC_EN;
-+ mcr |= PMCR_FORCE_TX_FC_EN;
- if (rx_pause)
-- mcr |= PMCR_RX_FC_EN;
-+ mcr |= PMCR_FORCE_RX_FC_EN;
- }
-
- if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
-@@ -2928,7 +2928,7 @@ static void mt753x_phylink_mac_link_up(s
- }
- }
-
-- mt7530_set(priv, MT7530_PMCR_P(dp->index), mcr);
-+ mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr);
- }
-
- static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -304,44 +304,46 @@ enum mt7530_vlan_port_acc_frm {
- #define G0_PORT_VID_DEF G0_PORT_VID(0)
-
- /* Register for port MAC control register */
--#define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100))
--#define PMCR_IFG_XMIT(x) (((x) & 0x3) << 18)
-+#define MT753X_PMCR_P(x) (0x3000 + ((x) * 0x100))
-+#define PMCR_IFG_XMIT_MASK GENMASK(19, 18)
-+#define PMCR_IFG_XMIT(x) FIELD_PREP(PMCR_IFG_XMIT_MASK, x)
- #define PMCR_EXT_PHY BIT(17)
- #define PMCR_MAC_MODE BIT(16)
--#define PMCR_FORCE_MODE BIT(15)
--#define PMCR_TX_EN BIT(14)
--#define PMCR_RX_EN BIT(13)
-+#define MT7530_FORCE_MODE BIT(15)
-+#define PMCR_MAC_TX_EN BIT(14)
-+#define PMCR_MAC_RX_EN BIT(13)
- #define PMCR_BACKOFF_EN BIT(9)
- #define PMCR_BACKPR_EN BIT(8)
- #define PMCR_FORCE_EEE1G BIT(7)
- #define PMCR_FORCE_EEE100 BIT(6)
--#define PMCR_TX_FC_EN BIT(5)
--#define PMCR_RX_FC_EN BIT(4)
-+#define PMCR_FORCE_RX_FC_EN BIT(5)
-+#define PMCR_FORCE_TX_FC_EN BIT(4)
- #define PMCR_FORCE_SPEED_1000 BIT(3)
- #define PMCR_FORCE_SPEED_100 BIT(2)
- #define PMCR_FORCE_FDX BIT(1)
- #define PMCR_FORCE_LNK BIT(0)
--#define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \
-- PMCR_FORCE_SPEED_1000)
--#define MT7531_FORCE_LNK BIT(31)
--#define MT7531_FORCE_SPD BIT(30)
--#define MT7531_FORCE_DPX BIT(29)
--#define MT7531_FORCE_RX_FC BIT(28)
--#define MT7531_FORCE_TX_FC BIT(27)
--#define MT7531_FORCE_EEE100 BIT(26)
--#define MT7531_FORCE_EEE1G BIT(25)
--#define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
-- MT7531_FORCE_SPD | \
-- MT7531_FORCE_DPX | \
-- MT7531_FORCE_RX_FC | \
-- MT7531_FORCE_TX_FC | \
-- MT7531_FORCE_EEE100 | \
-- MT7531_FORCE_EEE1G)
--#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
-- PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
-- PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
-- PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
-- PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
-+#define MT7531_FORCE_MODE_LNK BIT(31)
-+#define MT7531_FORCE_MODE_SPD BIT(30)
-+#define MT7531_FORCE_MODE_DPX BIT(29)
-+#define MT7531_FORCE_MODE_RX_FC BIT(28)
-+#define MT7531_FORCE_MODE_TX_FC BIT(27)
-+#define MT7531_FORCE_MODE_EEE100 BIT(26)
-+#define MT7531_FORCE_MODE_EEE1G BIT(25)
-+#define MT7531_FORCE_MODE_MASK (MT7531_FORCE_MODE_LNK | \
-+ MT7531_FORCE_MODE_SPD | \
-+ MT7531_FORCE_MODE_DPX | \
-+ MT7531_FORCE_MODE_RX_FC | \
-+ MT7531_FORCE_MODE_TX_FC | \
-+ MT7531_FORCE_MODE_EEE100 | \
-+ MT7531_FORCE_MODE_EEE1G)
-+#define PMCR_LINK_SETTINGS_MASK (PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \
-+ PMCR_FORCE_EEE1G | \
-+ PMCR_FORCE_EEE100 | \
-+ PMCR_FORCE_RX_FC_EN | \
-+ PMCR_FORCE_TX_FC_EN | \
-+ PMCR_FORCE_SPEED_1000 | \
-+ PMCR_FORCE_SPEED_100 | \
-+ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
-
- #define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
- #define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24)
+++ /dev/null
-From 875ec5b67ab88e969b171e6e9ea803e3ed759614 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:10 +0300
-Subject: [PATCH 03/15] net: dsa: mt7530: rename p5_intf_sel and use only for
- MT7530 switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The p5_intf_sel pointer is used to store the information of whether PHY
-muxing is used or not. PHY muxing is a feature specific to port 5 of the
-MT7530 switch. Do not use it for other switch models.
-
-Rename the pointer to p5_mode to store the mode the port is being used in.
-Rename the p5_interface_select enum to mt7530_p5_mode, the string
-representation to mt7530_p5_mode_str, and the enum elements.
-
-If PHY muxing is not detected, the default mode, GMAC5, will be used.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 62 +++++++++++++++++-----------------------
- drivers/net/dsa/mt7530.h | 15 +++++-----
- 2 files changed, 33 insertions(+), 44 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -850,19 +850,15 @@ mt7530_set_ageing_time(struct dsa_switch
- return 0;
- }
-
--static const char *p5_intf_modes(unsigned int p5_interface)
-+static const char *mt7530_p5_mode_str(unsigned int mode)
- {
-- switch (p5_interface) {
-- case P5_DISABLED:
-- return "DISABLED";
-- case P5_INTF_SEL_PHY_P0:
-- return "PHY P0";
-- case P5_INTF_SEL_PHY_P4:
-- return "PHY P4";
-- case P5_INTF_SEL_GMAC5:
-- return "GMAC5";
-+ switch (mode) {
-+ case MUX_PHY_P0:
-+ return "MUX PHY P0";
-+ case MUX_PHY_P4:
-+ return "MUX PHY P4";
- default:
-- return "unknown";
-+ return "GMAC5";
- }
- }
-
-@@ -879,23 +875,23 @@ static void mt7530_setup_port5(struct ds
- val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
- val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
-
-- switch (priv->p5_intf_sel) {
-- case P5_INTF_SEL_PHY_P0:
-- /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
-+ switch (priv->p5_mode) {
-+ /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
-+ case MUX_PHY_P0:
- val |= MHWTRAP_PHY0_SEL;
- fallthrough;
-- case P5_INTF_SEL_PHY_P4:
-- /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
-+
-+ /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
-+ case MUX_PHY_P4:
- val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
-
- /* Setup the MAC by default for the cpu port */
- mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
- break;
-- case P5_INTF_SEL_GMAC5:
-- /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
-- val &= ~MHWTRAP_P5_DIS;
-- break;
-+
-+ /* GMAC5: P5 -> SoC MAC or external PHY */
- default:
-+ val &= ~MHWTRAP_P5_DIS;
- break;
- }
-
-@@ -923,8 +919,8 @@ static void mt7530_setup_port5(struct ds
-
- mt7530_write(priv, MT7530_MHWTRAP, val);
-
-- dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
-- val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
-+ dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
-+ mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
-
- mutex_unlock(&priv->reg_mutex);
- }
-@@ -2467,13 +2463,11 @@ mt7530_setup(struct dsa_switch *ds)
- if (ret)
- return ret;
-
-- /* Setup port 5 */
-- if (!dsa_is_unused_port(ds, 5)) {
-- priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
-- } else {
-+ /* Check for PHY muxing on port 5 */
-+ if (dsa_is_unused_port(ds, 5)) {
- /* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY.
-- * Set priv->p5_intf_sel to the appropriate value if PHY muxing
-- * is detected.
-+ * Set priv->p5_mode to the appropriate value if PHY muxing is
-+ * detected.
- */
- for_each_child_of_node(dn, mac_np) {
- if (!of_device_is_compatible(mac_np,
-@@ -2497,17 +2491,16 @@ mt7530_setup(struct dsa_switch *ds)
- }
- id = of_mdio_parse_addr(ds->dev, phy_node);
- if (id == 0)
-- priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
-+ priv->p5_mode = MUX_PHY_P0;
- if (id == 4)
-- priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
-+ priv->p5_mode = MUX_PHY_P4;
- }
- of_node_put(mac_np);
- of_node_put(phy_node);
- break;
- }
-
-- if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 ||
-- priv->p5_intf_sel == P5_INTF_SEL_PHY_P4)
-+ if (priv->p5_mode == MUX_PHY_P0 || priv->p5_mode == MUX_PHY_P4)
- mt7530_setup_port5(ds, interface);
- }
-
-@@ -2645,9 +2638,6 @@ mt7531_setup(struct dsa_switch *ds)
- MT7531_EXT_P_MDIO_12);
- }
-
-- if (!dsa_is_unused_port(ds, 5))
-- priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
--
- mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
- MT7531_GPIO0_INTERRUPT);
-
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -708,12 +708,11 @@ struct mt7530_port {
- struct phylink_pcs *sgmii_pcs;
- };
-
--/* Port 5 interface select definitions */
--enum p5_interface_select {
-- P5_DISABLED,
-- P5_INTF_SEL_PHY_P0,
-- P5_INTF_SEL_PHY_P4,
-- P5_INTF_SEL_GMAC5,
-+/* Port 5 mode definitions of the MT7530 switch */
-+enum mt7530_p5_mode {
-+ GMAC5,
-+ MUX_PHY_P0,
-+ MUX_PHY_P4,
- };
-
- struct mt7530_priv;
-@@ -769,7 +768,7 @@ struct mt753x_info {
- * @ports: Holding the state among ports
- * @reg_mutex: The lock for protecting among process accessing
- * registers
-- * @p5_intf_sel: Holding the current port 5 interface select
-+ * @p5_mode: Holding the current mode of port 5 of the MT7530 switch
- * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch
- * has got SGMII
- * @irq: IRQ number of the switch
-@@ -791,7 +790,7 @@ struct mt7530_priv {
- const struct mt753x_info *info;
- unsigned int id;
- bool mcm;
-- enum p5_interface_select p5_intf_sel;
-+ enum mt7530_p5_mode p5_mode;
- bool p5_sgmii;
- u8 mirror_rx;
- u8 mirror_tx;
+++ /dev/null
-From 83fe3df057e641cd0e88425e579d7a5a370ca430 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:11 +0300
-Subject: [PATCH 04/15] net: dsa: mt7530: rename mt753x_bpdu_port_fw enum to
- mt753x_to_cpu_fw
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mt753x_bpdu_port_fw enum is globally used for manipulating the process
-of deciding the forwardable ports, specifically concerning the CPU port(s).
-Therefore, rename it and the values in it to mt753x_to_cpu_fw.
-
-Change FOLLOW_MFC to SYSTEM_DEFAULT to be on par with the switch documents.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 44 ++++++++++-------------
- drivers/net/dsa/mt7530.h | 76 ++++++++++++++++++++--------------------
- 2 files changed, 56 insertions(+), 64 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1100,42 +1100,34 @@ mt753x_trap_frames(struct mt7530_priv *p
- * VLAN-untagged.
- */
- mt7530_rmw(priv, MT753X_BPC,
-- MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
-- MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
-- MT753X_BPDU_PORT_FW_MASK,
-- MT753X_PAE_BPDU_FR |
-- MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-- MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_BPDU_CPU_ONLY);
-+ PAE_BPDU_FR | PAE_EG_TAG_MASK | PAE_PORT_FW_MASK |
-+ BPDU_EG_TAG_MASK | BPDU_PORT_FW_MASK,
-+ PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ PAE_PORT_FW(TO_CPU_FW_CPU_ONLY) |
-+ BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ TO_CPU_FW_CPU_ONLY);
-
- /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
- * them VLAN-untagged.
- */
- mt7530_rmw(priv, MT753X_RGAC1,
-- MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
-- MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
-- MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
-- MT753X_R02_BPDU_FR |
-- MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-- MT753X_R01_BPDU_FR |
-- MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_BPDU_CPU_ONLY);
-+ R02_BPDU_FR | R02_EG_TAG_MASK | R02_PORT_FW_MASK |
-+ R01_BPDU_FR | R01_EG_TAG_MASK | R01_PORT_FW_MASK,
-+ R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ R02_PORT_FW(TO_CPU_FW_CPU_ONLY) | R01_BPDU_FR |
-+ R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ TO_CPU_FW_CPU_ONLY);
-
- /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
- * them VLAN-untagged.
- */
- mt7530_rmw(priv, MT753X_RGAC2,
-- MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
-- MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
-- MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
-- MT753X_R0E_BPDU_FR |
-- MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-- MT753X_R03_BPDU_FR |
-- MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_BPDU_CPU_ONLY);
-+ R0E_BPDU_FR | R0E_EG_TAG_MASK | R0E_PORT_FW_MASK |
-+ R03_BPDU_FR | R03_EG_TAG_MASK | R03_PORT_FW_MASK,
-+ R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ R0E_PORT_FW(TO_CPU_FW_CPU_ONLY) | R03_BPDU_FR |
-+ R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ TO_CPU_FW_CPU_ONLY);
- }
-
- static void
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -67,47 +67,47 @@ enum mt753x_id {
- #define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
- MT7531_MIRROR_MASK : MIRROR_MASK)
-
--/* Registers for BPDU and PAE frame control*/
-+/* Register for BPDU and PAE frame control */
- #define MT753X_BPC 0x24
--#define MT753X_PAE_BPDU_FR BIT(25)
--#define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22)
--#define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
--#define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16)
--#define MT753X_PAE_PORT_FW(x) FIELD_PREP(MT753X_PAE_PORT_FW_MASK, x)
--#define MT753X_BPDU_EG_TAG_MASK GENMASK(8, 6)
--#define MT753X_BPDU_EG_TAG(x) FIELD_PREP(MT753X_BPDU_EG_TAG_MASK, x)
--#define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0)
-+#define PAE_BPDU_FR BIT(25)
-+#define PAE_EG_TAG_MASK GENMASK(24, 22)
-+#define PAE_EG_TAG(x) FIELD_PREP(PAE_EG_TAG_MASK, x)
-+#define PAE_PORT_FW_MASK GENMASK(18, 16)
-+#define PAE_PORT_FW(x) FIELD_PREP(PAE_PORT_FW_MASK, x)
-+#define BPDU_EG_TAG_MASK GENMASK(8, 6)
-+#define BPDU_EG_TAG(x) FIELD_PREP(BPDU_EG_TAG_MASK, x)
-+#define BPDU_PORT_FW_MASK GENMASK(2, 0)
-
--/* Register for :01 and :02 MAC DA frame control */
-+/* Register for 01-80-C2-00-00-[01,02] MAC DA frame control */
- #define MT753X_RGAC1 0x28
--#define MT753X_R02_BPDU_FR BIT(25)
--#define MT753X_R02_EG_TAG_MASK GENMASK(24, 22)
--#define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
--#define MT753X_R02_PORT_FW_MASK GENMASK(18, 16)
--#define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
--#define MT753X_R01_BPDU_FR BIT(9)
--#define MT753X_R01_EG_TAG_MASK GENMASK(8, 6)
--#define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
--#define MT753X_R01_PORT_FW_MASK GENMASK(2, 0)
-+#define R02_BPDU_FR BIT(25)
-+#define R02_EG_TAG_MASK GENMASK(24, 22)
-+#define R02_EG_TAG(x) FIELD_PREP(R02_EG_TAG_MASK, x)
-+#define R02_PORT_FW_MASK GENMASK(18, 16)
-+#define R02_PORT_FW(x) FIELD_PREP(R02_PORT_FW_MASK, x)
-+#define R01_BPDU_FR BIT(9)
-+#define R01_EG_TAG_MASK GENMASK(8, 6)
-+#define R01_EG_TAG(x) FIELD_PREP(R01_EG_TAG_MASK, x)
-+#define R01_PORT_FW_MASK GENMASK(2, 0)
-
--/* Register for :03 and :0E MAC DA frame control */
-+/* Register for 01-80-C2-00-00-[03,0E] MAC DA frame control */
- #define MT753X_RGAC2 0x2c
--#define MT753X_R0E_BPDU_FR BIT(25)
--#define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22)
--#define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
--#define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16)
--#define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
--#define MT753X_R03_BPDU_FR BIT(9)
--#define MT753X_R03_EG_TAG_MASK GENMASK(8, 6)
--#define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
--#define MT753X_R03_PORT_FW_MASK GENMASK(2, 0)
-+#define R0E_BPDU_FR BIT(25)
-+#define R0E_EG_TAG_MASK GENMASK(24, 22)
-+#define R0E_EG_TAG(x) FIELD_PREP(R0E_EG_TAG_MASK, x)
-+#define R0E_PORT_FW_MASK GENMASK(18, 16)
-+#define R0E_PORT_FW(x) FIELD_PREP(R0E_PORT_FW_MASK, x)
-+#define R03_BPDU_FR BIT(9)
-+#define R03_EG_TAG_MASK GENMASK(8, 6)
-+#define R03_EG_TAG(x) FIELD_PREP(R03_EG_TAG_MASK, x)
-+#define R03_PORT_FW_MASK GENMASK(2, 0)
-
--enum mt753x_bpdu_port_fw {
-- MT753X_BPDU_FOLLOW_MFC,
-- MT753X_BPDU_CPU_EXCLUDE = 4,
-- MT753X_BPDU_CPU_INCLUDE = 5,
-- MT753X_BPDU_CPU_ONLY = 6,
-- MT753X_BPDU_DROP = 7,
-+enum mt753x_to_cpu_fw {
-+ TO_CPU_FW_SYSTEM_DEFAULT,
-+ TO_CPU_FW_CPU_EXCLUDE = 4,
-+ TO_CPU_FW_CPU_INCLUDE = 5,
-+ TO_CPU_FW_CPU_ONLY = 6,
-+ TO_CPU_FW_DROP = 7,
- };
-
- /* Registers for address table access */
+++ /dev/null
-From 1dbc1bdc2869e6d2929235c70d64e393aa5a5fa2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:12 +0300
-Subject: [PATCH 05/15] net: dsa: mt7530: refactor MT7530_MFC and MT7531_CFC,
- add MT7531_QRY_FFP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_MFC register is on MT7530, MT7531, and the switch on the MT7988
-SoC. Rename it to MT753X_MFC. Bit 7 to 0 differs between MT7530 and
-MT7531/MT7988. Add MT7530 prefix to these definitions, and define the
-IGMP/MLD Query Frame Flooding Ports mask for MT7531.
-
-Rename the cases of MIRROR_MASK to MIRROR_PORT_MASK.
-
-Move mt753x_mirror_port_get() and mt753x_port_mirror_set() to mt7530.h as
-macros.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 38 ++++++++--------------
- drivers/net/dsa/mt7530.h | 69 +++++++++++++++++++++++++---------------
- 2 files changed, 57 insertions(+), 50 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1140,7 +1140,7 @@ mt753x_cpu_port_enable(struct dsa_switch
- PORT_SPEC_TAG);
-
- /* Enable flooding on the CPU port */
-- mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
-+ mt7530_set(priv, MT753X_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
- UNU_FFP(BIT(port)));
-
- /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
-@@ -1304,15 +1304,15 @@ mt7530_port_bridge_flags(struct dsa_swit
- flags.val & BR_LEARNING ? 0 : SA_DIS);
-
- if (flags.mask & BR_FLOOD)
-- mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)),
-+ mt7530_rmw(priv, MT753X_MFC, UNU_FFP(BIT(port)),
- flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0);
-
- if (flags.mask & BR_MCAST_FLOOD)
-- mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)),
-+ mt7530_rmw(priv, MT753X_MFC, UNM_FFP(BIT(port)),
- flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0);
-
- if (flags.mask & BR_BCAST_FLOOD)
-- mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)),
-+ mt7530_rmw(priv, MT753X_MFC, BC_FFP(BIT(port)),
- flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0);
-
- return 0;
-@@ -1848,20 +1848,6 @@ mt7530_port_vlan_del(struct dsa_switch *
- return 0;
- }
-
--static int mt753x_mirror_port_get(unsigned int id, u32 val)
--{
-- return (id == ID_MT7531 || id == ID_MT7988) ?
-- MT7531_MIRROR_PORT_GET(val) :
-- MIRROR_PORT(val);
--}
--
--static int mt753x_mirror_port_set(unsigned int id, u32 val)
--{
-- return (id == ID_MT7531 || id == ID_MT7988) ?
-- MT7531_MIRROR_PORT_SET(val) :
-- MIRROR_PORT(val);
--}
--
- static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
- struct dsa_mall_mirror_tc_entry *mirror,
- bool ingress, struct netlink_ext_ack *extack)
-@@ -1877,14 +1863,14 @@ static int mt753x_port_mirror_add(struct
- val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
-
- /* MT7530 only supports one monitor port */
-- monitor_port = mt753x_mirror_port_get(priv->id, val);
-+ monitor_port = MT753X_MIRROR_PORT_GET(priv->id, val);
- if (val & MT753X_MIRROR_EN(priv->id) &&
- monitor_port != mirror->to_local_port)
- return -EEXIST;
-
- val |= MT753X_MIRROR_EN(priv->id);
-- val &= ~MT753X_MIRROR_MASK(priv->id);
-- val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port);
-+ val &= ~MT753X_MIRROR_PORT_MASK(priv->id);
-+ val |= MT753X_MIRROR_PORT_SET(priv->id, mirror->to_local_port);
- mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
-
- val = mt7530_read(priv, MT7530_PCR_P(port));
-@@ -2524,7 +2510,7 @@ mt7531_setup_common(struct dsa_switch *d
- mt7530_mib_reset(ds);
-
- /* Disable flooding on all ports */
-- mt7530_clear(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK |
-+ mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
- UNU_FFP_MASK);
-
- for (i = 0; i < MT7530_NUM_PORTS; i++) {
-@@ -3086,10 +3072,12 @@ mt753x_conduit_state_change(struct dsa_s
- else
- priv->active_cpu_ports &= ~mask;
-
-- if (priv->active_cpu_ports)
-- val = CPU_EN | CPU_PORT(__ffs(priv->active_cpu_ports));
-+ if (priv->active_cpu_ports) {
-+ val = MT7530_CPU_EN |
-+ MT7530_CPU_PORT(__ffs(priv->active_cpu_ports));
-+ }
-
-- mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val);
-+ mt7530_rmw(priv, MT753X_MFC, MT7530_CPU_EN | MT7530_CPU_PORT_MASK, val);
- }
-
- static int mt7988_setup(struct dsa_switch *ds)
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -36,36 +36,55 @@ enum mt753x_id {
- #define MT753X_AGC 0xc
- #define LOCAL_EN BIT(7)
-
--/* Registers to mac forward control for unknown frames */
--#define MT7530_MFC 0x10
--#define BC_FFP(x) (((x) & 0xff) << 24)
--#define BC_FFP_MASK BC_FFP(~0)
--#define UNM_FFP(x) (((x) & 0xff) << 16)
--#define UNM_FFP_MASK UNM_FFP(~0)
--#define UNU_FFP(x) (((x) & 0xff) << 8)
--#define UNU_FFP_MASK UNU_FFP(~0)
--#define CPU_EN BIT(7)
--#define CPU_PORT_MASK GENMASK(6, 4)
--#define CPU_PORT(x) FIELD_PREP(CPU_PORT_MASK, x)
--#define MIRROR_EN BIT(3)
--#define MIRROR_PORT(x) ((x) & 0x7)
--#define MIRROR_MASK 0x7
-+/* Register for MAC forward control */
-+#define MT753X_MFC 0x10
-+#define BC_FFP_MASK GENMASK(31, 24)
-+#define BC_FFP(x) FIELD_PREP(BC_FFP_MASK, x)
-+#define UNM_FFP_MASK GENMASK(23, 16)
-+#define UNM_FFP(x) FIELD_PREP(UNM_FFP_MASK, x)
-+#define UNU_FFP_MASK GENMASK(15, 8)
-+#define UNU_FFP(x) FIELD_PREP(UNU_FFP_MASK, x)
-+#define MT7530_CPU_EN BIT(7)
-+#define MT7530_CPU_PORT_MASK GENMASK(6, 4)
-+#define MT7530_CPU_PORT(x) FIELD_PREP(MT7530_CPU_PORT_MASK, x)
-+#define MT7530_MIRROR_EN BIT(3)
-+#define MT7530_MIRROR_PORT_MASK GENMASK(2, 0)
-+#define MT7530_MIRROR_PORT_GET(x) FIELD_GET(MT7530_MIRROR_PORT_MASK, x)
-+#define MT7530_MIRROR_PORT_SET(x) FIELD_PREP(MT7530_MIRROR_PORT_MASK, x)
-+#define MT7531_QRY_FFP_MASK GENMASK(7, 0)
-+#define MT7531_QRY_FFP(x) FIELD_PREP(MT7531_QRY_FFP_MASK, x)
-
--/* Registers for CPU forward control */
-+/* Register for CPU forward control */
- #define MT7531_CFC 0x4
- #define MT7531_MIRROR_EN BIT(19)
--#define MT7531_MIRROR_MASK (MIRROR_MASK << 16)
--#define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK)
--#define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16)
-+#define MT7531_MIRROR_PORT_MASK GENMASK(18, 16)
-+#define MT7531_MIRROR_PORT_GET(x) FIELD_GET(MT7531_MIRROR_PORT_MASK, x)
-+#define MT7531_MIRROR_PORT_SET(x) FIELD_PREP(MT7531_MIRROR_PORT_MASK, x)
- #define MT7531_CPU_PMAP_MASK GENMASK(7, 0)
- #define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
-
--#define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
-- MT7531_CFC : MT7530_MFC)
--#define MT753X_MIRROR_EN(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
-- MT7531_MIRROR_EN : MIRROR_EN)
--#define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
-- MT7531_MIRROR_MASK : MIRROR_MASK)
-+#define MT753X_MIRROR_REG(id) ((id == ID_MT7531 || \
-+ id == ID_MT7988) ? \
-+ MT7531_CFC : MT753X_MFC)
-+
-+#define MT753X_MIRROR_EN(id) ((id == ID_MT7531 || \
-+ id == ID_MT7988) ? \
-+ MT7531_MIRROR_EN : MT7530_MIRROR_EN)
-+
-+#define MT753X_MIRROR_PORT_MASK(id) ((id == ID_MT7531 || \
-+ id == ID_MT7988) ? \
-+ MT7531_MIRROR_PORT_MASK : \
-+ MT7530_MIRROR_PORT_MASK)
-+
-+#define MT753X_MIRROR_PORT_GET(id, val) ((id == ID_MT7531 || \
-+ id == ID_MT7988) ? \
-+ MT7531_MIRROR_PORT_GET(val) : \
-+ MT7530_MIRROR_PORT_GET(val))
-+
-+#define MT753X_MIRROR_PORT_SET(id, val) ((id == ID_MT7531 || \
-+ id == ID_MT7988) ? \
-+ MT7531_MIRROR_PORT_SET(val) : \
-+ MT7530_MIRROR_PORT_SET(val))
-
- /* Register for BPDU and PAE frame control */
- #define MT753X_BPC 0x24
+++ /dev/null
-From 3ccf67597d35c06a7319e407b1c42f78a7966779 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:13 +0300
-Subject: [PATCH 06/15] net: dsa: mt7530: refactor MT7530_HWTRAP and
- MT7530_MHWTRAP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_HWTRAP and MT7530_MHWTRAP registers are on MT7530 and MT7531.
-It's called hardware trap on MT7530, software trap on MT7531. That's
-because some bits of the trap on MT7530 cannot be modified by software
-whilst all bits of the trap on MT7531 can. Rename the definitions for them
-to MT753X_TRAP and MT753X_MTRAP. Add MT7530 and MT7531 prefixes to the
-definitions specific to the switch model.
-
-Remove the extra parentheses from MT7530_XTAL_40MHZ and MT7530_XTAL_20MHZ.
-
-Rename MHWTRAP_PHY0_SEL, MHWTRAP_MANUAL, and MHWTRAP_PHY_ACCESS to be on
-par with the "MT7621 Giga Switch Programming Guide v0.3" document.
-
-Make an enumaration for the XTAL frequency. Set the data type of the xtal
-variable on mt7531_pll_setup() to it.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 59 ++++++++++++++++++++--------------------
- drivers/net/dsa/mt7530.h | 50 ++++++++++++++++------------------
- 2 files changed, 54 insertions(+), 55 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -403,23 +403,23 @@ mt7530_setup_port6(struct dsa_switch *ds
-
- mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1));
-
-- xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
-+ xtal = mt7530_read(priv, MT753X_MTRAP) & MT7530_XTAL_MASK;
-
-- if (xtal == HWTRAP_XTAL_25MHZ)
-+ if (xtal == MT7530_XTAL_25MHZ)
- ssc_delta = 0x57;
- else
- ssc_delta = 0x87;
-
- if (priv->id == ID_MT7621) {
- /* PLL frequency: 125MHz: 1.0GBit */
-- if (xtal == HWTRAP_XTAL_40MHZ)
-+ if (xtal == MT7530_XTAL_40MHZ)
- ncpo1 = 0x0640;
-- if (xtal == HWTRAP_XTAL_25MHZ)
-+ if (xtal == MT7530_XTAL_25MHZ)
- ncpo1 = 0x0a00;
- } else { /* PLL frequency: 250MHz: 2.0Gbit */
-- if (xtal == HWTRAP_XTAL_40MHZ)
-+ if (xtal == MT7530_XTAL_40MHZ)
- ncpo1 = 0x0c80;
-- if (xtal == HWTRAP_XTAL_25MHZ)
-+ if (xtal == MT7530_XTAL_25MHZ)
- ncpo1 = 0x1400;
- }
-
-@@ -442,19 +442,20 @@ mt7530_setup_port6(struct dsa_switch *ds
- static void
- mt7531_pll_setup(struct mt7530_priv *priv)
- {
-+ enum mt7531_xtal_fsel xtal;
- u32 top_sig;
- u32 hwstrap;
-- u32 xtal;
- u32 val;
-
- val = mt7530_read(priv, MT7531_CREV);
- top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
-- hwstrap = mt7530_read(priv, MT7531_HWTRAP);
-+ hwstrap = mt7530_read(priv, MT753X_TRAP);
- if ((val & CHIP_REV_M) > 0)
-- xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ :
-- HWTRAP_XTAL_FSEL_25MHZ;
-+ xtal = (top_sig & PAD_MCM_SMI_EN) ? MT7531_XTAL_FSEL_40MHZ :
-+ MT7531_XTAL_FSEL_25MHZ;
- else
-- xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK;
-+ xtal = (hwstrap & MT7531_XTAL25) ? MT7531_XTAL_FSEL_25MHZ :
-+ MT7531_XTAL_FSEL_40MHZ;
-
- /* Step 1 : Disable MT7531 COREPLL */
- val = mt7530_read(priv, MT7531_PLLGP_EN);
-@@ -483,13 +484,13 @@ mt7531_pll_setup(struct mt7530_priv *pri
- usleep_range(25, 35);
-
- switch (xtal) {
-- case HWTRAP_XTAL_FSEL_25MHZ:
-+ case MT7531_XTAL_FSEL_25MHZ:
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
- val &= ~RG_COREPLL_SDM_PCW_M;
- val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
- mt7530_write(priv, MT7531_PLLGP_CR0, val);
- break;
-- case HWTRAP_XTAL_FSEL_40MHZ:
-+ case MT7531_XTAL_FSEL_40MHZ:
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
- val &= ~RG_COREPLL_SDM_PCW_M;
- val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
-@@ -870,20 +871,20 @@ static void mt7530_setup_port5(struct ds
-
- mutex_lock(&priv->reg_mutex);
-
-- val = mt7530_read(priv, MT7530_MHWTRAP);
-+ val = mt7530_read(priv, MT753X_MTRAP);
-
-- val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
-- val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
-+ val |= MT7530_CHG_TRAP | MT7530_P5_MAC_SEL | MT7530_P5_DIS;
-+ val &= ~MT7530_P5_RGMII_MODE & ~MT7530_P5_PHY0_SEL;
-
- switch (priv->p5_mode) {
- /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
- case MUX_PHY_P0:
-- val |= MHWTRAP_PHY0_SEL;
-+ val |= MT7530_P5_PHY0_SEL;
- fallthrough;
-
- /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
- case MUX_PHY_P4:
-- val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
-+ val &= ~MT7530_P5_MAC_SEL & ~MT7530_P5_DIS;
-
- /* Setup the MAC by default for the cpu port */
- mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
-@@ -891,13 +892,13 @@ static void mt7530_setup_port5(struct ds
-
- /* GMAC5: P5 -> SoC MAC or external PHY */
- default:
-- val &= ~MHWTRAP_P5_DIS;
-+ val &= ~MT7530_P5_DIS;
- break;
- }
-
- /* Setup RGMII settings */
- if (phy_interface_mode_is_rgmii(interface)) {
-- val |= MHWTRAP_P5_RGMII_MODE;
-+ val |= MT7530_P5_RGMII_MODE;
-
- /* P5 RGMII RX Clock Control: delay setting for 1000M */
- mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
-@@ -917,7 +918,7 @@ static void mt7530_setup_port5(struct ds
- P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
- }
-
-- mt7530_write(priv, MT7530_MHWTRAP, val);
-+ mt7530_write(priv, MT753X_MTRAP, val);
-
- dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
- mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
-@@ -2356,7 +2357,7 @@ mt7530_setup(struct dsa_switch *ds)
- }
-
- /* Waiting for MT7530 got to stable */
-- INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
-+ INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
- ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
- 20, 1000000);
- if (ret < 0) {
-@@ -2371,7 +2372,7 @@ mt7530_setup(struct dsa_switch *ds)
- return -ENODEV;
- }
-
-- if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) {
-+ if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_20MHZ) {
- dev_err(priv->dev,
- "MT7530 with a 20MHz XTAL is not supported!\n");
- return -EINVAL;
-@@ -2392,12 +2393,12 @@ mt7530_setup(struct dsa_switch *ds)
- RD_TAP_MASK, RD_TAP(16));
-
- /* Enable port 6 */
-- val = mt7530_read(priv, MT7530_MHWTRAP);
-- val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
-- val |= MHWTRAP_MANUAL;
-- mt7530_write(priv, MT7530_MHWTRAP, val);
-+ val = mt7530_read(priv, MT753X_MTRAP);
-+ val &= ~MT7530_P6_DIS & ~MT7530_PHY_INDIRECT_ACCESS;
-+ val |= MT7530_CHG_TRAP;
-+ mt7530_write(priv, MT753X_MTRAP, val);
-
-- if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
-+ if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
- mt7530_pll_setup(priv);
-
- mt753x_trap_frames(priv);
-@@ -2577,7 +2578,7 @@ mt7531_setup(struct dsa_switch *ds)
- }
-
- /* Waiting for MT7530 got to stable */
-- INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
-+ INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
- ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
- 20, 1000000);
- if (ret < 0) {
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -495,32 +495,30 @@ enum mt7531_clk_skew {
- MT7531_CLK_SKEW_REVERSE = 3,
- };
-
--/* Register for hw trap status */
--#define MT7530_HWTRAP 0x7800
--#define HWTRAP_XTAL_MASK (BIT(10) | BIT(9))
--#define HWTRAP_XTAL_25MHZ (BIT(10) | BIT(9))
--#define HWTRAP_XTAL_40MHZ (BIT(10))
--#define HWTRAP_XTAL_20MHZ (BIT(9))
-+/* Register for trap status */
-+#define MT753X_TRAP 0x7800
-+#define MT7530_XTAL_MASK (BIT(10) | BIT(9))
-+#define MT7530_XTAL_25MHZ (BIT(10) | BIT(9))
-+#define MT7530_XTAL_40MHZ BIT(10)
-+#define MT7530_XTAL_20MHZ BIT(9)
-+#define MT7531_XTAL25 BIT(7)
-
--#define MT7531_HWTRAP 0x7800
--#define HWTRAP_XTAL_FSEL_MASK BIT(7)
--#define HWTRAP_XTAL_FSEL_25MHZ BIT(7)
--#define HWTRAP_XTAL_FSEL_40MHZ 0
--/* Unique fields of (M)HWSTRAP for MT7531 */
--#define XTAL_FSEL_S 7
--#define XTAL_FSEL_M BIT(7)
--#define PHY_EN BIT(6)
--#define CHG_STRAP BIT(8)
-+/* Register for trap modification */
-+#define MT753X_MTRAP 0x7804
-+#define MT7530_P5_PHY0_SEL BIT(20)
-+#define MT7530_CHG_TRAP BIT(16)
-+#define MT7530_P5_MAC_SEL BIT(13)
-+#define MT7530_P6_DIS BIT(8)
-+#define MT7530_P5_RGMII_MODE BIT(7)
-+#define MT7530_P5_DIS BIT(6)
-+#define MT7530_PHY_INDIRECT_ACCESS BIT(5)
-+#define MT7531_CHG_STRAP BIT(8)
-+#define MT7531_PHY_EN BIT(6)
-
--/* Register for hw trap modification */
--#define MT7530_MHWTRAP 0x7804
--#define MHWTRAP_PHY0_SEL BIT(20)
--#define MHWTRAP_MANUAL BIT(16)
--#define MHWTRAP_P5_MAC_SEL BIT(13)
--#define MHWTRAP_P6_DIS BIT(8)
--#define MHWTRAP_P5_RGMII_MODE BIT(7)
--#define MHWTRAP_P5_DIS BIT(6)
--#define MHWTRAP_PHY_ACCESS BIT(5)
-+enum mt7531_xtal_fsel {
-+ MT7531_XTAL_FSEL_25MHZ,
-+ MT7531_XTAL_FSEL_40MHZ,
-+};
-
- /* Register for TOP signal control */
- #define MT7530_TOP_SIG_CTRL 0x7808
+++ /dev/null
-From 1f5669efca65564c7533704917f79003c6b36c9c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:15 +0300
-Subject: [PATCH 08/15] net: dsa: mt7530: return mt7530_setup_mdio &
- mt7531_setup_common on error
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mt7530_setup_mdio() and mt7531_setup_common() functions should be
-checked for errors. Return if the functions return a non-zero value.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2642,7 +2642,9 @@ mt7531_setup(struct dsa_switch *ds)
- 0);
- }
-
-- mt7531_setup_common(ds);
-+ ret = mt7531_setup_common(ds);
-+ if (ret)
-+ return ret;
-
- /* Setup VLAN ID 0 for VLAN-unaware bridges */
- ret = mt7530_setup_vlan0(priv);
-@@ -3001,6 +3003,8 @@ mt753x_setup(struct dsa_switch *ds)
- ret = mt7530_setup_mdio(priv);
- if (ret && priv->irq)
- mt7530_free_irq_common(priv);
-+ if (ret)
-+ return ret;
-
- /* Initialise the PCS devices */
- for (i = 0; i < priv->ds->num_ports; i++) {
+++ /dev/null
-From 6cc2d4ccd77509df74b7b8ef46bbc6ba0a571318 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:16 +0300
-Subject: [PATCH 09/15] net: dsa: mt7530: define MAC speed capabilities per
- switch model
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With the support of the MT7988 SoC switch, the MAC speed capabilities
-defined on mt753x_phylink_get_caps() won't apply to all switch models
-anymore. Move them to more appropriate locations instead of overwriting
-config->mac_capabilities.
-
-Remove the comment on mt753x_phylink_get_caps() as it's become invalid with
-the support of MT7531 and MT7988 SoC switch.
-
-Add break to case 6 of mt7988_mac_port_get_caps() to be explicit.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2660,6 +2660,8 @@ mt7531_setup(struct dsa_switch *ds)
- static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
- struct phylink_config *config)
- {
-+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
-+
- switch (port) {
- /* Ports which are connected to switch PHYs. There is no MII pinout. */
- case 0 ... 4:
-@@ -2691,6 +2693,8 @@ static void mt7531_mac_port_get_caps(str
- {
- struct mt7530_priv *priv = ds->priv;
-
-+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
-+
- switch (port) {
- /* Ports which are connected to switch PHYs. There is no MII pinout. */
- case 0 ... 4:
-@@ -2730,14 +2734,17 @@ static void mt7988_mac_port_get_caps(str
- case 0 ... 3:
- __set_bit(PHY_INTERFACE_MODE_INTERNAL,
- config->supported_interfaces);
-+
-+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
- break;
-
- /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */
- case 6:
- __set_bit(PHY_INTERFACE_MODE_INTERNAL,
- config->supported_interfaces);
-- config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-- MAC_10000FD;
-+
-+ config->mac_capabilities |= MAC_10000FD;
-+ break;
- }
- }
-
-@@ -2907,9 +2914,7 @@ static void mt753x_phylink_get_caps(stru
- {
- struct mt7530_priv *priv = ds->priv;
-
-- /* This switch only supports full-duplex at 1Gbps */
-- config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-- MAC_10 | MAC_100 | MAC_1000FD;
-+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
-
- /* This driver does not make use of the speed, duplex, pause or the
- * advertisement in its mac_config, so it is safe to mark this driver
+++ /dev/null
-From dd0f15fc877c10567699190bce0f55e96f4ad6b5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:17 +0300
-Subject: [PATCH 10/15] net: dsa: mt7530: get rid of function sanity check
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Get rid of checking whether functions are filled properly. priv->info which
-is an mt753x_info structure is filled and checked for before this check.
-It's unnecessary checking whether it's filled properly.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3204,13 +3204,6 @@ mt7530_probe_common(struct mt7530_priv *
- if (!priv->info)
- return -EINVAL;
-
-- /* Sanity check if these required device operations are filled
-- * properly.
-- */
-- if (!priv->info->sw_setup || !priv->info->phy_read ||
-- !priv->info->phy_write || !priv->info->mac_port_get_caps)
-- return -EINVAL;
--
- priv->id = priv->info->id;
- priv->dev = dev;
- priv->ds->priv = priv;
+++ /dev/null
-From 2dff9759602b069f97ccc939e15a47ca051b2983 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:18 +0300
-Subject: [PATCH 11/15] net: dsa: mt7530: refactor MT7530_PMEEECR_P()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_PMEEECR_P() register is on MT7530, MT7531, and the switch on the
-MT7988 SoC. Rename the definition for them to MT753X_PMEEECR_P(). Use the
-FIELD_PREP and FIELD_GET macros. Rename GET_LPI_THRESH() and
-SET_LPI_THRESH() to LPI_THRESH_GET() and LPI_THRESH_SET().
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 8 ++++----
- drivers/net/dsa/mt7530.h | 13 +++++++------
- 2 files changed, 11 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3032,10 +3032,10 @@ static int mt753x_get_mac_eee(struct dsa
- struct ethtool_eee *e)
- {
- struct mt7530_priv *priv = ds->priv;
-- u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
-+ u32 eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
-
- e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
-- e->tx_lpi_timer = GET_LPI_THRESH(eeecr);
-+ e->tx_lpi_timer = LPI_THRESH_GET(eeecr);
-
- return 0;
- }
-@@ -3049,11 +3049,11 @@ static int mt753x_set_mac_eee(struct dsa
- if (e->tx_lpi_timer > 0xFFF)
- return -EINVAL;
-
-- set = SET_LPI_THRESH(e->tx_lpi_timer);
-+ set = LPI_THRESH_SET(e->tx_lpi_timer);
- if (!e->tx_lpi_enabled)
- /* Force LPI Mode without a delay */
- set |= LPI_MODE_EN;
-- mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set);
-+ mt7530_rmw(priv, MT753X_PMEEECR_P(port), mask, set);
-
- return 0;
- }
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -364,13 +364,14 @@ enum mt7530_vlan_port_acc_frm {
- PMCR_FORCE_SPEED_100 | \
- PMCR_FORCE_FDX | PMCR_FORCE_LNK)
-
--#define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
--#define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24)
--#define WAKEUP_TIME_100(x) (((x) & 0xFF) << 16)
-+#define MT753X_PMEEECR_P(x) (0x3004 + (x) * 0x100)
-+#define WAKEUP_TIME_1000_MASK GENMASK(31, 24)
-+#define WAKEUP_TIME_1000(x) FIELD_PREP(WAKEUP_TIME_1000_MASK, x)
-+#define WAKEUP_TIME_100_MASK GENMASK(23, 16)
-+#define WAKEUP_TIME_100(x) FIELD_PREP(WAKEUP_TIME_100_MASK, x)
- #define LPI_THRESH_MASK GENMASK(15, 4)
--#define LPI_THRESH_SHT 4
--#define SET_LPI_THRESH(x) (((x) << LPI_THRESH_SHT) & LPI_THRESH_MASK)
--#define GET_LPI_THRESH(x) (((x) & LPI_THRESH_MASK) >> LPI_THRESH_SHT)
-+#define LPI_THRESH_GET(x) FIELD_GET(LPI_THRESH_MASK, x)
-+#define LPI_THRESH_SET(x) FIELD_PREP(LPI_THRESH_MASK, x)
- #define LPI_MODE_EN BIT(0)
-
- #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100)
+++ /dev/null
-From 21d67c2fabfe40baf33202d3287b67b6c16f8382 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:19 +0300
-Subject: [PATCH 12/15] net: dsa: mt7530: get rid of mac_port_validate member
- of mt753x_info
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mac_port_validate member of the mt753x_info structure is not being
-used, remove it. Improve the member description section in the process.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.h | 10 +++-------
- 1 file changed, 3 insertions(+), 7 deletions(-)
-
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -743,13 +743,12 @@ struct mt753x_pcs {
-
- /* struct mt753x_info - This is the main data structure for holding the specific
- * part for each supported device
-+ * @id: Holding the identifier to a switch model
-+ * @pcs_ops: Holding the pointer to the MAC PCS operations structure
- * @sw_setup: Holding the handler to a device initialization
- * @phy_read: Holding the way reading PHY port
- * @phy_write: Holding the way writing PHY port
-- * @phy_mode_supported: Check if the PHY type is being supported on a certain
-- * port
-- * @mac_port_validate: Holding the way to set addition validate type for a
-- * certan MAC port
-+ * @mac_port_get_caps: Holding the handler that provides MAC capabilities
- * @mac_port_config: Holding the way setting up the PHY attribute to a
- * certain MAC port
- */
-@@ -763,9 +762,6 @@ struct mt753x_info {
- int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
- void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
- struct phylink_config *config);
-- void (*mac_port_validate)(struct dsa_switch *ds, int port,
-- phy_interface_t interface,
-- unsigned long *supported);
- void (*mac_port_config)(struct dsa_switch *ds, int port,
- unsigned int mode,
- phy_interface_t interface);
+++ /dev/null
-From 6efc8ae3eb0363328f479191a0cf0dc12a16e090 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:20 +0300
-Subject: [PATCH 13/15] net: dsa: mt7530: use priv->ds->num_ports instead of
- MT7530_NUM_PORTS
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use priv->ds->num_ports on all for loops which configure the switch
-registers. In the future, the value of MT7530_NUM_PORTS will depend on
-priv->id. Therefore, this change prepares the subdriver for a simpler
-implementation.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1391,7 +1391,7 @@ mt7530_port_set_vlan_unaware(struct dsa_
- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
- G0_PORT_VID_DEF);
-
-- for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ for (i = 0; i < priv->ds->num_ports; i++) {
- if (dsa_is_user_port(ds, i) &&
- dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
- all_user_ports_removed = false;
-@@ -2406,7 +2406,7 @@ mt7530_setup(struct dsa_switch *ds)
- /* Enable and reset MIB counters */
- mt7530_mib_reset(ds);
-
-- for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ for (i = 0; i < priv->ds->num_ports; i++) {
- /* Clear link settings and enable force mode to force link down
- * on all ports until they're enabled later.
- */
-@@ -2514,7 +2514,7 @@ mt7531_setup_common(struct dsa_switch *d
- mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
- UNU_FFP_MASK);
-
-- for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ for (i = 0; i < priv->ds->num_ports; i++) {
- /* Clear link settings and enable force mode to force link down
- * on all ports until they're enabled later.
- */
-@@ -2601,7 +2601,7 @@ mt7531_setup(struct dsa_switch *ds)
- priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
-
- /* Force link down on all ports before internal reset */
-- for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ for (i = 0; i < priv->ds->num_ports; i++)
- mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
-
- /* Reset the switch through internal reset */
+++ /dev/null
-From 4794c12e3aefe05dd0063c2b6b0101854b143bac Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:21 +0300
-Subject: [PATCH 14/15] net: dsa: mt7530: do not pass port variable to
- mt7531_rgmii_setup()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mt7531_rgmii_setup() function does not use the port variable, do not
-pass the variable to it.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2760,7 +2760,7 @@ mt7530_mac_config(struct dsa_switch *ds,
- mt7530_setup_port6(priv->ds, interface);
- }
-
--static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
-+static void mt7531_rgmii_setup(struct mt7530_priv *priv,
- phy_interface_t interface,
- struct phy_device *phydev)
- {
-@@ -2811,7 +2811,7 @@ mt7531_mac_config(struct dsa_switch *ds,
- if (phy_interface_mode_is_rgmii(interface)) {
- dp = dsa_to_port(ds, port);
- phydev = dp->slave->phydev;
-- mt7531_rgmii_setup(priv, port, interface, phydev);
-+ mt7531_rgmii_setup(priv, interface, phydev);
- }
- }
-
+++ /dev/null
-From c45832fe783f468aaaace09ae95a30cbf0acf724 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:22 +0300
-Subject: [PATCH 15/15] net: dsa: mt7530: explain exposing MDIO bus of MT7531AE
- better
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on MT7531AE.
-Therefore, the GPIO 11-12 pins are set to function as MDC and MDIO to
-expose the MDIO bus of the switch. Replace the comment with a better
-explanation.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2610,7 +2610,10 @@ mt7531_setup(struct dsa_switch *ds)
- if (!priv->p5_sgmii) {
- mt7531_pll_setup(priv);
- } else {
-- /* Let ds->slave_mii_bus be able to access external phy. */
-+ /* Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on
-+ * MT7531AE. Set the GPIO 11-12 pins to function as MDC and MDIO
-+ * to expose the MDIO bus of the switch.
-+ */
- mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
- MT7531_EXT_P_MDC_11);
- mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
+++ /dev/null
-From 856e8954a0a88d1a4d2b43e9002b9249131a156f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:08 +0300
-Subject: [PATCH 01/15] net: dsa: mt7530: disable EEE abilities on failure on
- MT7531 and MT7988
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 bits let the
-PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits determine the 1G/100 EEE
-abilities of the MAC. If MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 are
-unset, the abilities are left to be determined by PHY auto polling.
-
-The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
-made it so that the PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits are set on
-mt753x_phylink_mac_link_up(). But it did not set the MT7531_FORCE_EEE1G and
-MT7531_FORCE_EEE100 bits. Because of this, the EEE abilities will be
-determined by PHY auto polling, regardless of the result of phy_init_eee().
-
-Define these bits and add them to the MT7531_FORCE_MODE mask which is set
-in mt7531_setup_common(). With this, there won't be any EEE abilities set
-when phy_init_eee() returns a negative value.
-
-Thanks to Russell for explaining when phy_init_eee() could return a
-negative value below.
-
-Looking at phy_init_eee(), it could return a negative value when:
-
-1. phydev->drv is NULL
-2. if genphy_c45_eee_is_active() returns negative
-3. if genphy_c45_eee_is_active() returns zero, it returns -EPROTONOSUPPORT
-4. if phy_set_bits_mmd() fails (e.g. communication error with the PHY)
-
-If we then look at genphy_c45_eee_is_active(), then:
-
-genphy_c45_read_eee_adv() and genphy_c45_read_eee_lpa() propagate their
-non-zero return values, otherwise this function returns zero or positive
-integer.
-
-If we then look at genphy_c45_read_eee_adv(), then a failure of
-phy_read_mmd() would cause a negative value to be returned.
-
-Looking at genphy_c45_read_eee_lpa(), the same is true.
-
-So, it can be summarised as:
-
-- phydev->drv is NULL
-- there is a communication error accessing the PHY
-- EEE is not active
-
-otherwise, it returns zero on success.
-
-If one wishes to determine whether an error occurred vs EEE not being
-supported through negotiation for the negotiated speed, if it returns
--EPROTONOSUPPORT in the latter case. Other error codes mean either the
-driver has been unloaded or communication error.
-
-In conclusion, determining the EEE abilities by PHY auto polling shouldn't
-result in having any EEE abilities enabled, when one of the last two
-situations in the summary happens. And it seems that if phydev->drv is
-NULL, there would be bigger problems with the device than a broken link. So
-this is not a bugfix.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.h | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -328,11 +328,15 @@ enum mt7530_vlan_port_acc_frm {
- #define MT7531_FORCE_DPX BIT(29)
- #define MT7531_FORCE_RX_FC BIT(28)
- #define MT7531_FORCE_TX_FC BIT(27)
-+#define MT7531_FORCE_EEE100 BIT(26)
-+#define MT7531_FORCE_EEE1G BIT(25)
- #define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
- MT7531_FORCE_SPD | \
- MT7531_FORCE_DPX | \
- MT7531_FORCE_RX_FC | \
-- MT7531_FORCE_TX_FC)
-+ MT7531_FORCE_TX_FC | \
-+ MT7531_FORCE_EEE100 | \
-+ MT7531_FORCE_EEE1G)
- #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
- PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
- PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
+++ /dev/null
-From 712ad00d2f43814c81a7abfcbc339690a05fb6a0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:09 +0300
-Subject: [PATCH 02/15] net: dsa: mt7530: refactor MT7530_PMCR_P()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_PMCR_P() registers are on MT7530, MT7531, and the switch on the
-MT7988 SoC. Rename the definition for them to MT753X_PMCR_P(). Bit 15 is
-for MT7530 only. Add MT7530 prefix to the definition for bit 15.
-
-Use GENMASK and FIELD_PREP for PMCR_IFG_XMIT().
-
-Rename PMCR_TX_EN and PMCR_RX_EN to PMCR_MAC_TX_EN and PMCR_MAC_TX_EN to
-follow the naming on the "MT7621 Giga Switch Programming Guide v0.3",
-"MT7531 Reference Manual for Development Board v1.0", and "MT7988A Wi-Fi 7
-Generation Router Platform: Datasheet (Open Version) v0.1" documents.
-
-These documents show that PMCR_RX_FC_EN is at bit 5. Correct this along
-with renaming it to PMCR_FORCE_RX_FC_EN, and the same for PMCR_TX_FC_EN.
-
-Remove PMCR_SPEED_MASK which doesn't have a use.
-
-Rename the force mode definitions for MT7531 to FORCE_MODE. Add MASK at the
-end for the mask that includes all force mode definitions.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 24 ++++++++---------
- drivers/net/dsa/mt7530.h | 58 +++++++++++++++++++++-------------------
- 2 files changed, 42 insertions(+), 40 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -896,7 +896,7 @@ static void mt7530_setup_port5(struct ds
- val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
-
- /* Setup the MAC by default for the cpu port */
-- mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
-+ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
- break;
- case P5_INTF_SEL_GMAC5:
- /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
-@@ -2444,8 +2444,8 @@ mt7530_setup(struct dsa_switch *ds)
- /* Clear link settings and enable force mode to force link down
- * on all ports until they're enabled later.
- */
-- mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-- PMCR_FORCE_MODE, PMCR_FORCE_MODE);
-+ mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-+ MT7530_FORCE_MODE, MT7530_FORCE_MODE);
-
- /* Disable forwarding by default on all ports */
- mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
-@@ -2555,8 +2555,8 @@ mt7531_setup_common(struct dsa_switch *d
- /* Clear link settings and enable force mode to force link down
- * on all ports until they're enabled later.
- */
-- mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-- MT7531_FORCE_MODE, MT7531_FORCE_MODE);
-+ mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-+ MT7531_FORCE_MODE_MASK, MT7531_FORCE_MODE_MASK);
-
- /* Disable forwarding by default on all ports */
- mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
-@@ -2639,7 +2639,7 @@ mt7531_setup(struct dsa_switch *ds)
-
- /* Force link down on all ports before internal reset */
- for (i = 0; i < MT7530_NUM_PORTS; i++)
-- mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
-+ mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
-
- /* Reset the switch through internal reset */
- mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
-@@ -2881,7 +2881,7 @@ mt753x_phylink_mac_config(struct phylink
-
- /* Are we connected to external phy */
- if (port == 5 && dsa_is_user_port(ds, 5))
-- mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
-+ mt7530_set(priv, MT753X_PMCR_P(port), PMCR_EXT_PHY);
- }
-
- static void mt753x_phylink_mac_link_down(struct phylink_config *config,
-@@ -2891,7 +2891,7 @@ static void mt753x_phylink_mac_link_down
- struct dsa_port *dp = dsa_phylink_to_port(config);
- struct mt7530_priv *priv = dp->ds->priv;
-
-- mt7530_clear(priv, MT7530_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
-+ mt7530_clear(priv, MT753X_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
- }
-
- static void mt753x_phylink_mac_link_up(struct phylink_config *config,
-@@ -2905,7 +2905,7 @@ static void mt753x_phylink_mac_link_up(s
- struct mt7530_priv *priv = dp->ds->priv;
- u32 mcr;
-
-- mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
-+ mcr = PMCR_MAC_RX_EN | PMCR_MAC_TX_EN | PMCR_FORCE_LNK;
-
- switch (speed) {
- case SPEED_1000:
-@@ -2920,9 +2920,9 @@ static void mt753x_phylink_mac_link_up(s
- if (duplex == DUPLEX_FULL) {
- mcr |= PMCR_FORCE_FDX;
- if (tx_pause)
-- mcr |= PMCR_TX_FC_EN;
-+ mcr |= PMCR_FORCE_TX_FC_EN;
- if (rx_pause)
-- mcr |= PMCR_RX_FC_EN;
-+ mcr |= PMCR_FORCE_RX_FC_EN;
- }
-
- if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
-@@ -2937,7 +2937,7 @@ static void mt753x_phylink_mac_link_up(s
- }
- }
-
-- mt7530_set(priv, MT7530_PMCR_P(dp->index), mcr);
-+ mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr);
- }
-
- static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -304,44 +304,46 @@ enum mt7530_vlan_port_acc_frm {
- #define G0_PORT_VID_DEF G0_PORT_VID(0)
-
- /* Register for port MAC control register */
--#define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100))
--#define PMCR_IFG_XMIT(x) (((x) & 0x3) << 18)
-+#define MT753X_PMCR_P(x) (0x3000 + ((x) * 0x100))
-+#define PMCR_IFG_XMIT_MASK GENMASK(19, 18)
-+#define PMCR_IFG_XMIT(x) FIELD_PREP(PMCR_IFG_XMIT_MASK, x)
- #define PMCR_EXT_PHY BIT(17)
- #define PMCR_MAC_MODE BIT(16)
--#define PMCR_FORCE_MODE BIT(15)
--#define PMCR_TX_EN BIT(14)
--#define PMCR_RX_EN BIT(13)
-+#define MT7530_FORCE_MODE BIT(15)
-+#define PMCR_MAC_TX_EN BIT(14)
-+#define PMCR_MAC_RX_EN BIT(13)
- #define PMCR_BACKOFF_EN BIT(9)
- #define PMCR_BACKPR_EN BIT(8)
- #define PMCR_FORCE_EEE1G BIT(7)
- #define PMCR_FORCE_EEE100 BIT(6)
--#define PMCR_TX_FC_EN BIT(5)
--#define PMCR_RX_FC_EN BIT(4)
-+#define PMCR_FORCE_RX_FC_EN BIT(5)
-+#define PMCR_FORCE_TX_FC_EN BIT(4)
- #define PMCR_FORCE_SPEED_1000 BIT(3)
- #define PMCR_FORCE_SPEED_100 BIT(2)
- #define PMCR_FORCE_FDX BIT(1)
- #define PMCR_FORCE_LNK BIT(0)
--#define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \
-- PMCR_FORCE_SPEED_1000)
--#define MT7531_FORCE_LNK BIT(31)
--#define MT7531_FORCE_SPD BIT(30)
--#define MT7531_FORCE_DPX BIT(29)
--#define MT7531_FORCE_RX_FC BIT(28)
--#define MT7531_FORCE_TX_FC BIT(27)
--#define MT7531_FORCE_EEE100 BIT(26)
--#define MT7531_FORCE_EEE1G BIT(25)
--#define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
-- MT7531_FORCE_SPD | \
-- MT7531_FORCE_DPX | \
-- MT7531_FORCE_RX_FC | \
-- MT7531_FORCE_TX_FC | \
-- MT7531_FORCE_EEE100 | \
-- MT7531_FORCE_EEE1G)
--#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
-- PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
-- PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
-- PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
-- PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
-+#define MT7531_FORCE_MODE_LNK BIT(31)
-+#define MT7531_FORCE_MODE_SPD BIT(30)
-+#define MT7531_FORCE_MODE_DPX BIT(29)
-+#define MT7531_FORCE_MODE_RX_FC BIT(28)
-+#define MT7531_FORCE_MODE_TX_FC BIT(27)
-+#define MT7531_FORCE_MODE_EEE100 BIT(26)
-+#define MT7531_FORCE_MODE_EEE1G BIT(25)
-+#define MT7531_FORCE_MODE_MASK (MT7531_FORCE_MODE_LNK | \
-+ MT7531_FORCE_MODE_SPD | \
-+ MT7531_FORCE_MODE_DPX | \
-+ MT7531_FORCE_MODE_RX_FC | \
-+ MT7531_FORCE_MODE_TX_FC | \
-+ MT7531_FORCE_MODE_EEE100 | \
-+ MT7531_FORCE_MODE_EEE1G)
-+#define PMCR_LINK_SETTINGS_MASK (PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \
-+ PMCR_FORCE_EEE1G | \
-+ PMCR_FORCE_EEE100 | \
-+ PMCR_FORCE_RX_FC_EN | \
-+ PMCR_FORCE_TX_FC_EN | \
-+ PMCR_FORCE_SPEED_1000 | \
-+ PMCR_FORCE_SPEED_100 | \
-+ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
-
- #define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
- #define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24)
+++ /dev/null
-From 875ec5b67ab88e969b171e6e9ea803e3ed759614 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:10 +0300
-Subject: [PATCH 03/15] net: dsa: mt7530: rename p5_intf_sel and use only for
- MT7530 switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The p5_intf_sel pointer is used to store the information of whether PHY
-muxing is used or not. PHY muxing is a feature specific to port 5 of the
-MT7530 switch. Do not use it for other switch models.
-
-Rename the pointer to p5_mode to store the mode the port is being used in.
-Rename the p5_interface_select enum to mt7530_p5_mode, the string
-representation to mt7530_p5_mode_str, and the enum elements.
-
-If PHY muxing is not detected, the default mode, GMAC5, will be used.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 62 +++++++++++++++++-----------------------
- drivers/net/dsa/mt7530.h | 15 +++++-----
- 2 files changed, 33 insertions(+), 44 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -857,19 +857,15 @@ mt7530_set_ageing_time(struct dsa_switch
- return 0;
- }
-
--static const char *p5_intf_modes(unsigned int p5_interface)
-+static const char *mt7530_p5_mode_str(unsigned int mode)
- {
-- switch (p5_interface) {
-- case P5_DISABLED:
-- return "DISABLED";
-- case P5_INTF_SEL_PHY_P0:
-- return "PHY P0";
-- case P5_INTF_SEL_PHY_P4:
-- return "PHY P4";
-- case P5_INTF_SEL_GMAC5:
-- return "GMAC5";
-+ switch (mode) {
-+ case MUX_PHY_P0:
-+ return "MUX PHY P0";
-+ case MUX_PHY_P4:
-+ return "MUX PHY P4";
- default:
-- return "unknown";
-+ return "GMAC5";
- }
- }
-
-@@ -886,23 +882,23 @@ static void mt7530_setup_port5(struct ds
- val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
- val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
-
-- switch (priv->p5_intf_sel) {
-- case P5_INTF_SEL_PHY_P0:
-- /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
-+ switch (priv->p5_mode) {
-+ /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
-+ case MUX_PHY_P0:
- val |= MHWTRAP_PHY0_SEL;
- fallthrough;
-- case P5_INTF_SEL_PHY_P4:
-- /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
-+
-+ /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
-+ case MUX_PHY_P4:
- val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
-
- /* Setup the MAC by default for the cpu port */
- mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
- break;
-- case P5_INTF_SEL_GMAC5:
-- /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
-- val &= ~MHWTRAP_P5_DIS;
-- break;
-+
-+ /* GMAC5: P5 -> SoC MAC or external PHY */
- default:
-+ val &= ~MHWTRAP_P5_DIS;
- break;
- }
-
-@@ -930,8 +926,8 @@ static void mt7530_setup_port5(struct ds
-
- mt7530_write(priv, MT7530_MHWTRAP, val);
-
-- dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
-- val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
-+ dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
-+ mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
-
- mutex_unlock(&priv->reg_mutex);
- }
-@@ -2476,13 +2472,11 @@ mt7530_setup(struct dsa_switch *ds)
- if (ret)
- return ret;
-
-- /* Setup port 5 */
-- if (!dsa_is_unused_port(ds, 5)) {
-- priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
-- } else {
-+ /* Check for PHY muxing on port 5 */
-+ if (dsa_is_unused_port(ds, 5)) {
- /* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY.
-- * Set priv->p5_intf_sel to the appropriate value if PHY muxing
-- * is detected.
-+ * Set priv->p5_mode to the appropriate value if PHY muxing is
-+ * detected.
- */
- for_each_child_of_node(dn, mac_np) {
- if (!of_device_is_compatible(mac_np,
-@@ -2506,17 +2500,16 @@ mt7530_setup(struct dsa_switch *ds)
- }
- id = of_mdio_parse_addr(ds->dev, phy_node);
- if (id == 0)
-- priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
-+ priv->p5_mode = MUX_PHY_P0;
- if (id == 4)
-- priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
-+ priv->p5_mode = MUX_PHY_P4;
- }
- of_node_put(mac_np);
- of_node_put(phy_node);
- break;
- }
-
-- if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 ||
-- priv->p5_intf_sel == P5_INTF_SEL_PHY_P4)
-+ if (priv->p5_mode == MUX_PHY_P0 || priv->p5_mode == MUX_PHY_P4)
- mt7530_setup_port5(ds, interface);
- }
-
-@@ -2654,9 +2647,6 @@ mt7531_setup(struct dsa_switch *ds)
- MT7531_EXT_P_MDIO_12);
- }
-
-- if (!dsa_is_unused_port(ds, 5))
-- priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
--
- mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
- MT7531_GPIO0_INTERRUPT);
-
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -708,12 +708,11 @@ struct mt7530_port {
- struct phylink_pcs *sgmii_pcs;
- };
-
--/* Port 5 interface select definitions */
--enum p5_interface_select {
-- P5_DISABLED,
-- P5_INTF_SEL_PHY_P0,
-- P5_INTF_SEL_PHY_P4,
-- P5_INTF_SEL_GMAC5,
-+/* Port 5 mode definitions of the MT7530 switch */
-+enum mt7530_p5_mode {
-+ GMAC5,
-+ MUX_PHY_P0,
-+ MUX_PHY_P4,
- };
-
- struct mt7530_priv;
-@@ -776,7 +775,7 @@ struct mt753x_info {
- * @ports: Holding the state among ports
- * @reg_mutex: The lock for protecting among process accessing
- * registers
-- * @p5_intf_sel: Holding the current port 5 interface select
-+ * @p5_mode: Holding the current mode of port 5 of the MT7530 switch
- * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch
- * has got SGMII
- * @irq: IRQ number of the switch
-@@ -798,7 +797,7 @@ struct mt7530_priv {
- const struct mt753x_info *info;
- unsigned int id;
- bool mcm;
-- enum p5_interface_select p5_intf_sel;
-+ enum mt7530_p5_mode p5_mode;
- bool p5_sgmii;
- u8 mirror_rx;
- u8 mirror_tx;
+++ /dev/null
-From 83fe3df057e641cd0e88425e579d7a5a370ca430 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:11 +0300
-Subject: [PATCH 04/15] net: dsa: mt7530: rename mt753x_bpdu_port_fw enum to
- mt753x_to_cpu_fw
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mt753x_bpdu_port_fw enum is globally used for manipulating the process
-of deciding the forwardable ports, specifically concerning the CPU port(s).
-Therefore, rename it and the values in it to mt753x_to_cpu_fw.
-
-Change FOLLOW_MFC to SYSTEM_DEFAULT to be on par with the switch documents.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 44 ++++++++++-------------
- drivers/net/dsa/mt7530.h | 76 ++++++++++++++++++++--------------------
- 2 files changed, 56 insertions(+), 64 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1107,42 +1107,34 @@ mt753x_trap_frames(struct mt7530_priv *p
- * VLAN-untagged.
- */
- mt7530_rmw(priv, MT753X_BPC,
-- MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
-- MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
-- MT753X_BPDU_PORT_FW_MASK,
-- MT753X_PAE_BPDU_FR |
-- MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-- MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_BPDU_CPU_ONLY);
-+ PAE_BPDU_FR | PAE_EG_TAG_MASK | PAE_PORT_FW_MASK |
-+ BPDU_EG_TAG_MASK | BPDU_PORT_FW_MASK,
-+ PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ PAE_PORT_FW(TO_CPU_FW_CPU_ONLY) |
-+ BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ TO_CPU_FW_CPU_ONLY);
-
- /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
- * them VLAN-untagged.
- */
- mt7530_rmw(priv, MT753X_RGAC1,
-- MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
-- MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
-- MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
-- MT753X_R02_BPDU_FR |
-- MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-- MT753X_R01_BPDU_FR |
-- MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_BPDU_CPU_ONLY);
-+ R02_BPDU_FR | R02_EG_TAG_MASK | R02_PORT_FW_MASK |
-+ R01_BPDU_FR | R01_EG_TAG_MASK | R01_PORT_FW_MASK,
-+ R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ R02_PORT_FW(TO_CPU_FW_CPU_ONLY) | R01_BPDU_FR |
-+ R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ TO_CPU_FW_CPU_ONLY);
-
- /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
- * them VLAN-untagged.
- */
- mt7530_rmw(priv, MT753X_RGAC2,
-- MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
-- MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
-- MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
-- MT753X_R0E_BPDU_FR |
-- MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-- MT753X_R03_BPDU_FR |
-- MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-- MT753X_BPDU_CPU_ONLY);
-+ R0E_BPDU_FR | R0E_EG_TAG_MASK | R0E_PORT_FW_MASK |
-+ R03_BPDU_FR | R03_EG_TAG_MASK | R03_PORT_FW_MASK,
-+ R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ R0E_PORT_FW(TO_CPU_FW_CPU_ONLY) | R03_BPDU_FR |
-+ R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+ TO_CPU_FW_CPU_ONLY);
- }
-
- static void
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -67,47 +67,47 @@ enum mt753x_id {
- #define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
- MT7531_MIRROR_MASK : MIRROR_MASK)
-
--/* Registers for BPDU and PAE frame control*/
-+/* Register for BPDU and PAE frame control */
- #define MT753X_BPC 0x24
--#define MT753X_PAE_BPDU_FR BIT(25)
--#define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22)
--#define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
--#define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16)
--#define MT753X_PAE_PORT_FW(x) FIELD_PREP(MT753X_PAE_PORT_FW_MASK, x)
--#define MT753X_BPDU_EG_TAG_MASK GENMASK(8, 6)
--#define MT753X_BPDU_EG_TAG(x) FIELD_PREP(MT753X_BPDU_EG_TAG_MASK, x)
--#define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0)
-+#define PAE_BPDU_FR BIT(25)
-+#define PAE_EG_TAG_MASK GENMASK(24, 22)
-+#define PAE_EG_TAG(x) FIELD_PREP(PAE_EG_TAG_MASK, x)
-+#define PAE_PORT_FW_MASK GENMASK(18, 16)
-+#define PAE_PORT_FW(x) FIELD_PREP(PAE_PORT_FW_MASK, x)
-+#define BPDU_EG_TAG_MASK GENMASK(8, 6)
-+#define BPDU_EG_TAG(x) FIELD_PREP(BPDU_EG_TAG_MASK, x)
-+#define BPDU_PORT_FW_MASK GENMASK(2, 0)
-
--/* Register for :01 and :02 MAC DA frame control */
-+/* Register for 01-80-C2-00-00-[01,02] MAC DA frame control */
- #define MT753X_RGAC1 0x28
--#define MT753X_R02_BPDU_FR BIT(25)
--#define MT753X_R02_EG_TAG_MASK GENMASK(24, 22)
--#define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
--#define MT753X_R02_PORT_FW_MASK GENMASK(18, 16)
--#define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
--#define MT753X_R01_BPDU_FR BIT(9)
--#define MT753X_R01_EG_TAG_MASK GENMASK(8, 6)
--#define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
--#define MT753X_R01_PORT_FW_MASK GENMASK(2, 0)
-+#define R02_BPDU_FR BIT(25)
-+#define R02_EG_TAG_MASK GENMASK(24, 22)
-+#define R02_EG_TAG(x) FIELD_PREP(R02_EG_TAG_MASK, x)
-+#define R02_PORT_FW_MASK GENMASK(18, 16)
-+#define R02_PORT_FW(x) FIELD_PREP(R02_PORT_FW_MASK, x)
-+#define R01_BPDU_FR BIT(9)
-+#define R01_EG_TAG_MASK GENMASK(8, 6)
-+#define R01_EG_TAG(x) FIELD_PREP(R01_EG_TAG_MASK, x)
-+#define R01_PORT_FW_MASK GENMASK(2, 0)
-
--/* Register for :03 and :0E MAC DA frame control */
-+/* Register for 01-80-C2-00-00-[03,0E] MAC DA frame control */
- #define MT753X_RGAC2 0x2c
--#define MT753X_R0E_BPDU_FR BIT(25)
--#define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22)
--#define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
--#define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16)
--#define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
--#define MT753X_R03_BPDU_FR BIT(9)
--#define MT753X_R03_EG_TAG_MASK GENMASK(8, 6)
--#define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
--#define MT753X_R03_PORT_FW_MASK GENMASK(2, 0)
-+#define R0E_BPDU_FR BIT(25)
-+#define R0E_EG_TAG_MASK GENMASK(24, 22)
-+#define R0E_EG_TAG(x) FIELD_PREP(R0E_EG_TAG_MASK, x)
-+#define R0E_PORT_FW_MASK GENMASK(18, 16)
-+#define R0E_PORT_FW(x) FIELD_PREP(R0E_PORT_FW_MASK, x)
-+#define R03_BPDU_FR BIT(9)
-+#define R03_EG_TAG_MASK GENMASK(8, 6)
-+#define R03_EG_TAG(x) FIELD_PREP(R03_EG_TAG_MASK, x)
-+#define R03_PORT_FW_MASK GENMASK(2, 0)
-
--enum mt753x_bpdu_port_fw {
-- MT753X_BPDU_FOLLOW_MFC,
-- MT753X_BPDU_CPU_EXCLUDE = 4,
-- MT753X_BPDU_CPU_INCLUDE = 5,
-- MT753X_BPDU_CPU_ONLY = 6,
-- MT753X_BPDU_DROP = 7,
-+enum mt753x_to_cpu_fw {
-+ TO_CPU_FW_SYSTEM_DEFAULT,
-+ TO_CPU_FW_CPU_EXCLUDE = 4,
-+ TO_CPU_FW_CPU_INCLUDE = 5,
-+ TO_CPU_FW_CPU_ONLY = 6,
-+ TO_CPU_FW_DROP = 7,
- };
-
- /* Registers for address table access */
+++ /dev/null
-From 1dbc1bdc2869e6d2929235c70d64e393aa5a5fa2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:12 +0300
-Subject: [PATCH 05/15] net: dsa: mt7530: refactor MT7530_MFC and MT7531_CFC,
- add MT7531_QRY_FFP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_MFC register is on MT7530, MT7531, and the switch on the MT7988
-SoC. Rename it to MT753X_MFC. Bit 7 to 0 differs between MT7530 and
-MT7531/MT7988. Add MT7530 prefix to these definitions, and define the
-IGMP/MLD Query Frame Flooding Ports mask for MT7531.
-
-Rename the cases of MIRROR_MASK to MIRROR_PORT_MASK.
-
-Move mt753x_mirror_port_get() and mt753x_port_mirror_set() to mt7530.h as
-macros.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 38 ++++++++--------------
- drivers/net/dsa/mt7530.h | 69 +++++++++++++++++++++++++---------------
- 2 files changed, 57 insertions(+), 50 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1147,7 +1147,7 @@ mt753x_cpu_port_enable(struct dsa_switch
- PORT_SPEC_TAG);
-
- /* Enable flooding on the CPU port */
-- mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
-+ mt7530_set(priv, MT753X_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
- UNU_FFP(BIT(port)));
-
- /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
-@@ -1311,15 +1311,15 @@ mt7530_port_bridge_flags(struct dsa_swit
- flags.val & BR_LEARNING ? 0 : SA_DIS);
-
- if (flags.mask & BR_FLOOD)
-- mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)),
-+ mt7530_rmw(priv, MT753X_MFC, UNU_FFP(BIT(port)),
- flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0);
-
- if (flags.mask & BR_MCAST_FLOOD)
-- mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)),
-+ mt7530_rmw(priv, MT753X_MFC, UNM_FFP(BIT(port)),
- flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0);
-
- if (flags.mask & BR_BCAST_FLOOD)
-- mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)),
-+ mt7530_rmw(priv, MT753X_MFC, BC_FFP(BIT(port)),
- flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0);
-
- return 0;
-@@ -1855,20 +1855,6 @@ mt7530_port_vlan_del(struct dsa_switch *
- return 0;
- }
-
--static int mt753x_mirror_port_get(unsigned int id, u32 val)
--{
-- return (id == ID_MT7531 || id == ID_MT7988) ?
-- MT7531_MIRROR_PORT_GET(val) :
-- MIRROR_PORT(val);
--}
--
--static int mt753x_mirror_port_set(unsigned int id, u32 val)
--{
-- return (id == ID_MT7531 || id == ID_MT7988) ?
-- MT7531_MIRROR_PORT_SET(val) :
-- MIRROR_PORT(val);
--}
--
- static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
- struct dsa_mall_mirror_tc_entry *mirror,
- bool ingress, struct netlink_ext_ack *extack)
-@@ -1884,14 +1870,14 @@ static int mt753x_port_mirror_add(struct
- val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
-
- /* MT7530 only supports one monitor port */
-- monitor_port = mt753x_mirror_port_get(priv->id, val);
-+ monitor_port = MT753X_MIRROR_PORT_GET(priv->id, val);
- if (val & MT753X_MIRROR_EN(priv->id) &&
- monitor_port != mirror->to_local_port)
- return -EEXIST;
-
- val |= MT753X_MIRROR_EN(priv->id);
-- val &= ~MT753X_MIRROR_MASK(priv->id);
-- val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port);
-+ val &= ~MT753X_MIRROR_PORT_MASK(priv->id);
-+ val |= MT753X_MIRROR_PORT_SET(priv->id, mirror->to_local_port);
- mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
-
- val = mt7530_read(priv, MT7530_PCR_P(port));
-@@ -2533,7 +2519,7 @@ mt7531_setup_common(struct dsa_switch *d
- mt7530_mib_reset(ds);
-
- /* Disable flooding on all ports */
-- mt7530_clear(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK |
-+ mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
- UNU_FFP_MASK);
-
- for (i = 0; i < MT7530_NUM_PORTS; i++) {
-@@ -3089,10 +3075,12 @@ mt753x_conduit_state_change(struct dsa_s
- else
- priv->active_cpu_ports &= ~mask;
-
-- if (priv->active_cpu_ports)
-- val = CPU_EN | CPU_PORT(__ffs(priv->active_cpu_ports));
-+ if (priv->active_cpu_ports) {
-+ val = MT7530_CPU_EN |
-+ MT7530_CPU_PORT(__ffs(priv->active_cpu_ports));
-+ }
-
-- mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val);
-+ mt7530_rmw(priv, MT753X_MFC, MT7530_CPU_EN | MT7530_CPU_PORT_MASK, val);
- }
-
- static int mt7988_setup(struct dsa_switch *ds)
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -36,36 +36,55 @@ enum mt753x_id {
- #define MT753X_AGC 0xc
- #define LOCAL_EN BIT(7)
-
--/* Registers to mac forward control for unknown frames */
--#define MT7530_MFC 0x10
--#define BC_FFP(x) (((x) & 0xff) << 24)
--#define BC_FFP_MASK BC_FFP(~0)
--#define UNM_FFP(x) (((x) & 0xff) << 16)
--#define UNM_FFP_MASK UNM_FFP(~0)
--#define UNU_FFP(x) (((x) & 0xff) << 8)
--#define UNU_FFP_MASK UNU_FFP(~0)
--#define CPU_EN BIT(7)
--#define CPU_PORT_MASK GENMASK(6, 4)
--#define CPU_PORT(x) FIELD_PREP(CPU_PORT_MASK, x)
--#define MIRROR_EN BIT(3)
--#define MIRROR_PORT(x) ((x) & 0x7)
--#define MIRROR_MASK 0x7
-+/* Register for MAC forward control */
-+#define MT753X_MFC 0x10
-+#define BC_FFP_MASK GENMASK(31, 24)
-+#define BC_FFP(x) FIELD_PREP(BC_FFP_MASK, x)
-+#define UNM_FFP_MASK GENMASK(23, 16)
-+#define UNM_FFP(x) FIELD_PREP(UNM_FFP_MASK, x)
-+#define UNU_FFP_MASK GENMASK(15, 8)
-+#define UNU_FFP(x) FIELD_PREP(UNU_FFP_MASK, x)
-+#define MT7530_CPU_EN BIT(7)
-+#define MT7530_CPU_PORT_MASK GENMASK(6, 4)
-+#define MT7530_CPU_PORT(x) FIELD_PREP(MT7530_CPU_PORT_MASK, x)
-+#define MT7530_MIRROR_EN BIT(3)
-+#define MT7530_MIRROR_PORT_MASK GENMASK(2, 0)
-+#define MT7530_MIRROR_PORT_GET(x) FIELD_GET(MT7530_MIRROR_PORT_MASK, x)
-+#define MT7530_MIRROR_PORT_SET(x) FIELD_PREP(MT7530_MIRROR_PORT_MASK, x)
-+#define MT7531_QRY_FFP_MASK GENMASK(7, 0)
-+#define MT7531_QRY_FFP(x) FIELD_PREP(MT7531_QRY_FFP_MASK, x)
-
--/* Registers for CPU forward control */
-+/* Register for CPU forward control */
- #define MT7531_CFC 0x4
- #define MT7531_MIRROR_EN BIT(19)
--#define MT7531_MIRROR_MASK (MIRROR_MASK << 16)
--#define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK)
--#define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16)
-+#define MT7531_MIRROR_PORT_MASK GENMASK(18, 16)
-+#define MT7531_MIRROR_PORT_GET(x) FIELD_GET(MT7531_MIRROR_PORT_MASK, x)
-+#define MT7531_MIRROR_PORT_SET(x) FIELD_PREP(MT7531_MIRROR_PORT_MASK, x)
- #define MT7531_CPU_PMAP_MASK GENMASK(7, 0)
- #define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
-
--#define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
-- MT7531_CFC : MT7530_MFC)
--#define MT753X_MIRROR_EN(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
-- MT7531_MIRROR_EN : MIRROR_EN)
--#define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
-- MT7531_MIRROR_MASK : MIRROR_MASK)
-+#define MT753X_MIRROR_REG(id) ((id == ID_MT7531 || \
-+ id == ID_MT7988) ? \
-+ MT7531_CFC : MT753X_MFC)
-+
-+#define MT753X_MIRROR_EN(id) ((id == ID_MT7531 || \
-+ id == ID_MT7988) ? \
-+ MT7531_MIRROR_EN : MT7530_MIRROR_EN)
-+
-+#define MT753X_MIRROR_PORT_MASK(id) ((id == ID_MT7531 || \
-+ id == ID_MT7988) ? \
-+ MT7531_MIRROR_PORT_MASK : \
-+ MT7530_MIRROR_PORT_MASK)
-+
-+#define MT753X_MIRROR_PORT_GET(id, val) ((id == ID_MT7531 || \
-+ id == ID_MT7988) ? \
-+ MT7531_MIRROR_PORT_GET(val) : \
-+ MT7530_MIRROR_PORT_GET(val))
-+
-+#define MT753X_MIRROR_PORT_SET(id, val) ((id == ID_MT7531 || \
-+ id == ID_MT7988) ? \
-+ MT7531_MIRROR_PORT_SET(val) : \
-+ MT7530_MIRROR_PORT_SET(val))
-
- /* Register for BPDU and PAE frame control */
- #define MT753X_BPC 0x24
+++ /dev/null
-From 3ccf67597d35c06a7319e407b1c42f78a7966779 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:13 +0300
-Subject: [PATCH 06/15] net: dsa: mt7530: refactor MT7530_HWTRAP and
- MT7530_MHWTRAP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_HWTRAP and MT7530_MHWTRAP registers are on MT7530 and MT7531.
-It's called hardware trap on MT7530, software trap on MT7531. That's
-because some bits of the trap on MT7530 cannot be modified by software
-whilst all bits of the trap on MT7531 can. Rename the definitions for them
-to MT753X_TRAP and MT753X_MTRAP. Add MT7530 and MT7531 prefixes to the
-definitions specific to the switch model.
-
-Remove the extra parentheses from MT7530_XTAL_40MHZ and MT7530_XTAL_20MHZ.
-
-Rename MHWTRAP_PHY0_SEL, MHWTRAP_MANUAL, and MHWTRAP_PHY_ACCESS to be on
-par with the "MT7621 Giga Switch Programming Guide v0.3" document.
-
-Make an enumaration for the XTAL frequency. Set the data type of the xtal
-variable on mt7531_pll_setup() to it.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 59 ++++++++++++++++++++--------------------
- drivers/net/dsa/mt7530.h | 50 ++++++++++++++++------------------
- 2 files changed, 54 insertions(+), 55 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -417,23 +417,23 @@ mt7530_setup_port6(struct dsa_switch *ds
-
- mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1));
-
-- xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
-+ xtal = mt7530_read(priv, MT753X_MTRAP) & MT7530_XTAL_MASK;
-
-- if (xtal == HWTRAP_XTAL_25MHZ)
-+ if (xtal == MT7530_XTAL_25MHZ)
- ssc_delta = 0x57;
- else
- ssc_delta = 0x87;
-
- if (priv->id == ID_MT7621) {
- /* PLL frequency: 125MHz: 1.0GBit */
-- if (xtal == HWTRAP_XTAL_40MHZ)
-+ if (xtal == MT7530_XTAL_40MHZ)
- ncpo1 = 0x0640;
-- if (xtal == HWTRAP_XTAL_25MHZ)
-+ if (xtal == MT7530_XTAL_25MHZ)
- ncpo1 = 0x0a00;
- } else { /* PLL frequency: 250MHz: 2.0Gbit */
-- if (xtal == HWTRAP_XTAL_40MHZ)
-+ if (xtal == MT7530_XTAL_40MHZ)
- ncpo1 = 0x0c80;
-- if (xtal == HWTRAP_XTAL_25MHZ)
-+ if (xtal == MT7530_XTAL_25MHZ)
- ncpo1 = 0x1400;
- }
-
-@@ -456,19 +456,20 @@ mt7530_setup_port6(struct dsa_switch *ds
- static void
- mt7531_pll_setup(struct mt7530_priv *priv)
- {
-+ enum mt7531_xtal_fsel xtal;
- u32 top_sig;
- u32 hwstrap;
-- u32 xtal;
- u32 val;
-
- val = mt7530_read(priv, MT7531_CREV);
- top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
-- hwstrap = mt7530_read(priv, MT7531_HWTRAP);
-+ hwstrap = mt7530_read(priv, MT753X_TRAP);
- if ((val & CHIP_REV_M) > 0)
-- xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ :
-- HWTRAP_XTAL_FSEL_25MHZ;
-+ xtal = (top_sig & PAD_MCM_SMI_EN) ? MT7531_XTAL_FSEL_40MHZ :
-+ MT7531_XTAL_FSEL_25MHZ;
- else
-- xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK;
-+ xtal = (hwstrap & MT7531_XTAL25) ? MT7531_XTAL_FSEL_25MHZ :
-+ MT7531_XTAL_FSEL_40MHZ;
-
- /* Step 1 : Disable MT7531 COREPLL */
- val = mt7530_read(priv, MT7531_PLLGP_EN);
-@@ -497,13 +498,13 @@ mt7531_pll_setup(struct mt7530_priv *pri
- usleep_range(25, 35);
-
- switch (xtal) {
-- case HWTRAP_XTAL_FSEL_25MHZ:
-+ case MT7531_XTAL_FSEL_25MHZ:
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
- val &= ~RG_COREPLL_SDM_PCW_M;
- val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
- mt7530_write(priv, MT7531_PLLGP_CR0, val);
- break;
-- case HWTRAP_XTAL_FSEL_40MHZ:
-+ case MT7531_XTAL_FSEL_40MHZ:
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
- val &= ~RG_COREPLL_SDM_PCW_M;
- val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
-@@ -877,20 +878,20 @@ static void mt7530_setup_port5(struct ds
-
- mutex_lock(&priv->reg_mutex);
-
-- val = mt7530_read(priv, MT7530_MHWTRAP);
-+ val = mt7530_read(priv, MT753X_MTRAP);
-
-- val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
-- val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
-+ val |= MT7530_CHG_TRAP | MT7530_P5_MAC_SEL | MT7530_P5_DIS;
-+ val &= ~MT7530_P5_RGMII_MODE & ~MT7530_P5_PHY0_SEL;
-
- switch (priv->p5_mode) {
- /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
- case MUX_PHY_P0:
-- val |= MHWTRAP_PHY0_SEL;
-+ val |= MT7530_P5_PHY0_SEL;
- fallthrough;
-
- /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
- case MUX_PHY_P4:
-- val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
-+ val &= ~MT7530_P5_MAC_SEL & ~MT7530_P5_DIS;
-
- /* Setup the MAC by default for the cpu port */
- mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
-@@ -898,13 +899,13 @@ static void mt7530_setup_port5(struct ds
-
- /* GMAC5: P5 -> SoC MAC or external PHY */
- default:
-- val &= ~MHWTRAP_P5_DIS;
-+ val &= ~MT7530_P5_DIS;
- break;
- }
-
- /* Setup RGMII settings */
- if (phy_interface_mode_is_rgmii(interface)) {
-- val |= MHWTRAP_P5_RGMII_MODE;
-+ val |= MT7530_P5_RGMII_MODE;
-
- /* P5 RGMII RX Clock Control: delay setting for 1000M */
- mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
-@@ -924,7 +925,7 @@ static void mt7530_setup_port5(struct ds
- P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
- }
-
-- mt7530_write(priv, MT7530_MHWTRAP, val);
-+ mt7530_write(priv, MT753X_MTRAP, val);
-
- dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
- mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
-@@ -2365,7 +2366,7 @@ mt7530_setup(struct dsa_switch *ds)
- }
-
- /* Waiting for MT7530 got to stable */
-- INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
-+ INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
- ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
- 20, 1000000);
- if (ret < 0) {
-@@ -2380,7 +2381,7 @@ mt7530_setup(struct dsa_switch *ds)
- return -ENODEV;
- }
-
-- if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) {
-+ if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_20MHZ) {
- dev_err(priv->dev,
- "MT7530 with a 20MHz XTAL is not supported!\n");
- return -EINVAL;
-@@ -2401,12 +2402,12 @@ mt7530_setup(struct dsa_switch *ds)
- RD_TAP_MASK, RD_TAP(16));
-
- /* Enable port 6 */
-- val = mt7530_read(priv, MT7530_MHWTRAP);
-- val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
-- val |= MHWTRAP_MANUAL;
-- mt7530_write(priv, MT7530_MHWTRAP, val);
-+ val = mt7530_read(priv, MT753X_MTRAP);
-+ val &= ~MT7530_P6_DIS & ~MT7530_PHY_INDIRECT_ACCESS;
-+ val |= MT7530_CHG_TRAP;
-+ mt7530_write(priv, MT753X_MTRAP, val);
-
-- if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
-+ if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
- mt7530_pll_setup(priv);
-
- mt753x_trap_frames(priv);
-@@ -2586,7 +2587,7 @@ mt7531_setup(struct dsa_switch *ds)
- }
-
- /* Waiting for MT7530 got to stable */
-- INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
-+ INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
- ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
- 20, 1000000);
- if (ret < 0) {
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -495,32 +495,30 @@ enum mt7531_clk_skew {
- MT7531_CLK_SKEW_REVERSE = 3,
- };
-
--/* Register for hw trap status */
--#define MT7530_HWTRAP 0x7800
--#define HWTRAP_XTAL_MASK (BIT(10) | BIT(9))
--#define HWTRAP_XTAL_25MHZ (BIT(10) | BIT(9))
--#define HWTRAP_XTAL_40MHZ (BIT(10))
--#define HWTRAP_XTAL_20MHZ (BIT(9))
-+/* Register for trap status */
-+#define MT753X_TRAP 0x7800
-+#define MT7530_XTAL_MASK (BIT(10) | BIT(9))
-+#define MT7530_XTAL_25MHZ (BIT(10) | BIT(9))
-+#define MT7530_XTAL_40MHZ BIT(10)
-+#define MT7530_XTAL_20MHZ BIT(9)
-+#define MT7531_XTAL25 BIT(7)
-
--#define MT7531_HWTRAP 0x7800
--#define HWTRAP_XTAL_FSEL_MASK BIT(7)
--#define HWTRAP_XTAL_FSEL_25MHZ BIT(7)
--#define HWTRAP_XTAL_FSEL_40MHZ 0
--/* Unique fields of (M)HWSTRAP for MT7531 */
--#define XTAL_FSEL_S 7
--#define XTAL_FSEL_M BIT(7)
--#define PHY_EN BIT(6)
--#define CHG_STRAP BIT(8)
-+/* Register for trap modification */
-+#define MT753X_MTRAP 0x7804
-+#define MT7530_P5_PHY0_SEL BIT(20)
-+#define MT7530_CHG_TRAP BIT(16)
-+#define MT7530_P5_MAC_SEL BIT(13)
-+#define MT7530_P6_DIS BIT(8)
-+#define MT7530_P5_RGMII_MODE BIT(7)
-+#define MT7530_P5_DIS BIT(6)
-+#define MT7530_PHY_INDIRECT_ACCESS BIT(5)
-+#define MT7531_CHG_STRAP BIT(8)
-+#define MT7531_PHY_EN BIT(6)
-
--/* Register for hw trap modification */
--#define MT7530_MHWTRAP 0x7804
--#define MHWTRAP_PHY0_SEL BIT(20)
--#define MHWTRAP_MANUAL BIT(16)
--#define MHWTRAP_P5_MAC_SEL BIT(13)
--#define MHWTRAP_P6_DIS BIT(8)
--#define MHWTRAP_P5_RGMII_MODE BIT(7)
--#define MHWTRAP_P5_DIS BIT(6)
--#define MHWTRAP_PHY_ACCESS BIT(5)
-+enum mt7531_xtal_fsel {
-+ MT7531_XTAL_FSEL_25MHZ,
-+ MT7531_XTAL_FSEL_40MHZ,
-+};
-
- /* Register for TOP signal control */
- #define MT7530_TOP_SIG_CTRL 0x7808
+++ /dev/null
-From 1f5669efca65564c7533704917f79003c6b36c9c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:15 +0300
-Subject: [PATCH 08/15] net: dsa: mt7530: return mt7530_setup_mdio &
- mt7531_setup_common on error
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mt7530_setup_mdio() and mt7531_setup_common() functions should be
-checked for errors. Return if the functions return a non-zero value.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2651,7 +2651,9 @@ mt7531_setup(struct dsa_switch *ds)
- 0);
- }
-
-- mt7531_setup_common(ds);
-+ ret = mt7531_setup_common(ds);
-+ if (ret)
-+ return ret;
-
- /* Setup VLAN ID 0 for VLAN-unaware bridges */
- ret = mt7530_setup_vlan0(priv);
-@@ -3004,6 +3006,8 @@ mt753x_setup(struct dsa_switch *ds)
- ret = mt7530_setup_mdio(priv);
- if (ret && priv->irq)
- mt7530_free_irq_common(priv);
-+ if (ret)
-+ return ret;
-
- /* Initialise the PCS devices */
- for (i = 0; i < priv->ds->num_ports; i++) {
+++ /dev/null
-From 6cc2d4ccd77509df74b7b8ef46bbc6ba0a571318 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:16 +0300
-Subject: [PATCH 09/15] net: dsa: mt7530: define MAC speed capabilities per
- switch model
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With the support of the MT7988 SoC switch, the MAC speed capabilities
-defined on mt753x_phylink_get_caps() won't apply to all switch models
-anymore. Move them to more appropriate locations instead of overwriting
-config->mac_capabilities.
-
-Remove the comment on mt753x_phylink_get_caps() as it's become invalid with
-the support of MT7531 and MT7988 SoC switch.
-
-Add break to case 6 of mt7988_mac_port_get_caps() to be explicit.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2669,6 +2669,8 @@ mt7531_setup(struct dsa_switch *ds)
- static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
- struct phylink_config *config)
- {
-+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
-+
- switch (port) {
- /* Ports which are connected to switch PHYs. There is no MII pinout. */
- case 0 ... 4:
-@@ -2700,6 +2702,8 @@ static void mt7531_mac_port_get_caps(str
- {
- struct mt7530_priv *priv = ds->priv;
-
-+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
-+
- switch (port) {
- /* Ports which are connected to switch PHYs. There is no MII pinout. */
- case 0 ... 4:
-@@ -2739,14 +2743,17 @@ static void mt7988_mac_port_get_caps(str
- case 0 ... 3:
- __set_bit(PHY_INTERFACE_MODE_INTERNAL,
- config->supported_interfaces);
-+
-+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
- break;
-
- /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */
- case 6:
- __set_bit(PHY_INTERFACE_MODE_INTERNAL,
- config->supported_interfaces);
-- config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-- MAC_10000FD;
-+
-+ config->mac_capabilities |= MAC_10000FD;
-+ break;
- }
- }
-
-@@ -2916,9 +2923,7 @@ static void mt753x_phylink_get_caps(stru
- {
- struct mt7530_priv *priv = ds->priv;
-
-- /* This switch only supports full-duplex at 1Gbps */
-- config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-- MAC_10 | MAC_100 | MAC_1000FD;
-+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
-
- priv->info->mac_port_get_caps(ds, port, config);
- }
+++ /dev/null
-From dd0f15fc877c10567699190bce0f55e96f4ad6b5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:17 +0300
-Subject: [PATCH 10/15] net: dsa: mt7530: get rid of function sanity check
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Get rid of checking whether functions are filled properly. priv->info which
-is an mt753x_info structure is filled and checked for before this check.
-It's unnecessary checking whether it's filled properly.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3216,13 +3216,6 @@ mt7530_probe_common(struct mt7530_priv *
- if (!priv->info)
- return -EINVAL;
-
-- /* Sanity check if these required device operations are filled
-- * properly.
-- */
-- if (!priv->info->sw_setup || !priv->info->phy_read_c22 ||
-- !priv->info->phy_write_c22 || !priv->info->mac_port_get_caps)
-- return -EINVAL;
--
- priv->id = priv->info->id;
- priv->dev = dev;
- priv->ds->priv = priv;
+++ /dev/null
-From 2dff9759602b069f97ccc939e15a47ca051b2983 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:18 +0300
-Subject: [PATCH 11/15] net: dsa: mt7530: refactor MT7530_PMEEECR_P()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_PMEEECR_P() register is on MT7530, MT7531, and the switch on the
-MT7988 SoC. Rename the definition for them to MT753X_PMEEECR_P(). Use the
-FIELD_PREP and FIELD_GET macros. Rename GET_LPI_THRESH() and
-SET_LPI_THRESH() to LPI_THRESH_GET() and LPI_THRESH_SET().
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 8 ++++----
- drivers/net/dsa/mt7530.h | 13 +++++++------
- 2 files changed, 11 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3035,10 +3035,10 @@ static int mt753x_get_mac_eee(struct dsa
- struct ethtool_eee *e)
- {
- struct mt7530_priv *priv = ds->priv;
-- u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
-+ u32 eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
-
- e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
-- e->tx_lpi_timer = GET_LPI_THRESH(eeecr);
-+ e->tx_lpi_timer = LPI_THRESH_GET(eeecr);
-
- return 0;
- }
-@@ -3052,11 +3052,11 @@ static int mt753x_set_mac_eee(struct dsa
- if (e->tx_lpi_timer > 0xFFF)
- return -EINVAL;
-
-- set = SET_LPI_THRESH(e->tx_lpi_timer);
-+ set = LPI_THRESH_SET(e->tx_lpi_timer);
- if (!e->tx_lpi_enabled)
- /* Force LPI Mode without a delay */
- set |= LPI_MODE_EN;
-- mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set);
-+ mt7530_rmw(priv, MT753X_PMEEECR_P(port), mask, set);
-
- return 0;
- }
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -364,13 +364,14 @@ enum mt7530_vlan_port_acc_frm {
- PMCR_FORCE_SPEED_100 | \
- PMCR_FORCE_FDX | PMCR_FORCE_LNK)
-
--#define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
--#define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24)
--#define WAKEUP_TIME_100(x) (((x) & 0xFF) << 16)
-+#define MT753X_PMEEECR_P(x) (0x3004 + (x) * 0x100)
-+#define WAKEUP_TIME_1000_MASK GENMASK(31, 24)
-+#define WAKEUP_TIME_1000(x) FIELD_PREP(WAKEUP_TIME_1000_MASK, x)
-+#define WAKEUP_TIME_100_MASK GENMASK(23, 16)
-+#define WAKEUP_TIME_100(x) FIELD_PREP(WAKEUP_TIME_100_MASK, x)
- #define LPI_THRESH_MASK GENMASK(15, 4)
--#define LPI_THRESH_SHT 4
--#define SET_LPI_THRESH(x) (((x) << LPI_THRESH_SHT) & LPI_THRESH_MASK)
--#define GET_LPI_THRESH(x) (((x) & LPI_THRESH_MASK) >> LPI_THRESH_SHT)
-+#define LPI_THRESH_GET(x) FIELD_GET(LPI_THRESH_MASK, x)
-+#define LPI_THRESH_SET(x) FIELD_PREP(LPI_THRESH_MASK, x)
- #define LPI_MODE_EN BIT(0)
-
- #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100)
+++ /dev/null
-From 21d67c2fabfe40baf33202d3287b67b6c16f8382 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:19 +0300
-Subject: [PATCH 12/15] net: dsa: mt7530: get rid of mac_port_validate member
- of mt753x_info
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mac_port_validate member of the mt753x_info structure is not being
-used, remove it. Improve the member description section in the process.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.h | 10 +++-------
- 1 file changed, 3 insertions(+), 7 deletions(-)
-
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -743,15 +743,14 @@ struct mt753x_pcs {
-
- /* struct mt753x_info - This is the main data structure for holding the specific
- * part for each supported device
-+ * @id: Holding the identifier to a switch model
-+ * @pcs_ops: Holding the pointer to the MAC PCS operations structure
- * @sw_setup: Holding the handler to a device initialization
- * @phy_read_c22: Holding the way reading PHY port using C22
- * @phy_write_c22: Holding the way writing PHY port using C22
- * @phy_read_c45: Holding the way reading PHY port using C45
- * @phy_write_c45: Holding the way writing PHY port using C45
-- * @phy_mode_supported: Check if the PHY type is being supported on a certain
-- * port
-- * @mac_port_validate: Holding the way to set addition validate type for a
-- * certan MAC port
-+ * @mac_port_get_caps: Holding the handler that provides MAC capabilities
- * @mac_port_config: Holding the way setting up the PHY attribute to a
- * certain MAC port
- */
-@@ -770,9 +769,6 @@ struct mt753x_info {
- int regnum, u16 val);
- void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
- struct phylink_config *config);
-- void (*mac_port_validate)(struct dsa_switch *ds, int port,
-- phy_interface_t interface,
-- unsigned long *supported);
- void (*mac_port_config)(struct dsa_switch *ds, int port,
- unsigned int mode,
- phy_interface_t interface);
+++ /dev/null
-From 6efc8ae3eb0363328f479191a0cf0dc12a16e090 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:20 +0300
-Subject: [PATCH 13/15] net: dsa: mt7530: use priv->ds->num_ports instead of
- MT7530_NUM_PORTS
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use priv->ds->num_ports on all for loops which configure the switch
-registers. In the future, the value of MT7530_NUM_PORTS will depend on
-priv->id. Therefore, this change prepares the subdriver for a simpler
-implementation.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1398,7 +1398,7 @@ mt7530_port_set_vlan_unaware(struct dsa_
- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
- G0_PORT_VID_DEF);
-
-- for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ for (i = 0; i < priv->ds->num_ports; i++) {
- if (dsa_is_user_port(ds, i) &&
- dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
- all_user_ports_removed = false;
-@@ -2415,7 +2415,7 @@ mt7530_setup(struct dsa_switch *ds)
- /* Enable and reset MIB counters */
- mt7530_mib_reset(ds);
-
-- for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ for (i = 0; i < priv->ds->num_ports; i++) {
- /* Clear link settings and enable force mode to force link down
- * on all ports until they're enabled later.
- */
-@@ -2523,7 +2523,7 @@ mt7531_setup_common(struct dsa_switch *d
- mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
- UNU_FFP_MASK);
-
-- for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ for (i = 0; i < priv->ds->num_ports; i++) {
- /* Clear link settings and enable force mode to force link down
- * on all ports until they're enabled later.
- */
-@@ -2610,7 +2610,7 @@ mt7531_setup(struct dsa_switch *ds)
- priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
-
- /* Force link down on all ports before internal reset */
-- for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ for (i = 0; i < priv->ds->num_ports; i++)
- mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
-
- /* Reset the switch through internal reset */
+++ /dev/null
-From c078ebbf5f6f6d8390035a9f92eeab766b78884d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:21 +0300
-Subject: [PATCH 14/15] net: dsa: mt7530: do not pass port variable to
- mt7531_rgmii_setup()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mt7531_rgmii_setup() function does not use the port variable, do not
-pass the variable to it.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2769,7 +2769,7 @@ mt7530_mac_config(struct dsa_switch *ds,
- mt7530_setup_port6(priv->ds, interface);
- }
-
--static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
-+static void mt7531_rgmii_setup(struct mt7530_priv *priv,
- phy_interface_t interface,
- struct phy_device *phydev)
- {
-@@ -2820,7 +2820,7 @@ mt7531_mac_config(struct dsa_switch *ds,
- if (phy_interface_mode_is_rgmii(interface)) {
- dp = dsa_to_port(ds, port);
- phydev = dp->slave->phydev;
-- mt7531_rgmii_setup(priv, port, interface, phydev);
-+ mt7531_rgmii_setup(priv, interface, phydev);
- }
- }
-
+++ /dev/null
-From e7a9cc3cc00b40e0bc2bae40bd2ece0e48fa51d5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:22 +0300
-Subject: [PATCH 15/15] net: dsa: mt7530: explain exposing MDIO bus of MT7531AE
- better
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on MT7531AE.
-Therefore, the GPIO 11-12 pins are set to function as MDC and MDIO to
-expose the MDIO bus of the switch. Replace the comment with a better
-explanation.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2619,7 +2619,10 @@ mt7531_setup(struct dsa_switch *ds)
- if (!priv->p5_sgmii) {
- mt7531_pll_setup(priv);
- } else {
-- /* Let ds->slave_mii_bus be able to access external phy. */
-+ /* Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on
-+ * MT7531AE. Set the GPIO 11-12 pins to function as MDC and MDIO
-+ * to expose the MDIO bus of the switch.
-+ */
- mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
- MT7531_EXT_P_MDC_11);
- mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
--- /dev/null
+From patchwork Sat Apr 27 11:24:42 2024
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 8bit
+X-Patchwork-Submitter: =?utf-8?b?QXLEsW7DpyDDnE5BTCB2aWEgQjQgUmVsYXk=?=
+ <devnull+arinc.unal.arinc9.com@kernel.org>
+X-Patchwork-Id: 13645655
+From: =?utf-8?b?QXLEsW7DpyDDnE5BTCB2aWEgQjQgUmVsYXk=?=
+ <devnull+arinc.unal.arinc9.com@kernel.org>
+Date: Sat, 27 Apr 2024 14:24:42 +0300
+Subject: [PATCH net-next] net: dsa: mt7530: do not set MT7530_P5_DIS when
+ PHY muxing is being used
+Precedence: bulk
+X-Mailing-List: netdev@vger.kernel.org
+List-Id: <netdev.vger.kernel.org>
+List-Subscribe: <mailto:netdev+subscribe@vger.kernel.org>
+List-Unsubscribe: <mailto:netdev+unsubscribe@vger.kernel.org>
+MIME-Version: 1.0
+Message-Id:
+ <20240427-for-netnext-mt7530-do-not-disable-port5-when-phy-muxing-v1-1-793cdf9d7707@arinc9.com>
+To: Daniel Golle <daniel@makrotopia.org>, DENG Qingfang <dqfext@gmail.com>,
+ Sean Wang <sean.wang@mediatek.com>, Andrew Lunn <andrew@lunn.ch>,
+ Florian Fainelli <f.fainelli@gmail.com>,
+ Vladimir Oltean <olteanv@gmail.com>,
+ "David S. Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
+ Matthias Brugger <matthias.bgg@gmail.com>,
+ AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
+ linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org,
+ =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= <arinc.unal@arinc9.com>
+X-Mailer: b4 0.13.0
+X-Patchwork-Delegate: kuba@kernel.org
+
+From: Arınç ÜNAL <arinc.unal@arinc9.com>
+
+When the PHY muxing feature is in use, port 5 won't be defined in the
+device tree. Because of this, the type member of the dsa_port structure for
+this port will be assigned DSA_PORT_TYPE_UNUSED. The dsa_port_setup()
+function calls ds->ops->port_disable() when the port type is
+DSA_PORT_TYPE_UNUSED.
+
+The MT7530_P5_DIS bit is unset when PHY muxing is being used.
+mt7530_port_disable() which is assigned to ds->ops->port_disable() is
+called afterwards. Currently, mt7530_port_disable() sets MT7530_P5_DIS
+which breaks network connectivity when PHY muxing is being used.
+
+Therefore, do not set MT7530_P5_DIS when PHY muxing is being used.
+
+Fixes: 377174c5760c ("net: dsa: mt7530: move MT753X_MTRAP operations for MT7530")
+Reported-by: Daniel Golle <daniel@makrotopia.org>
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+Hello.
+
+I've sent this to net-next as the patch it fixes is on the current
+development cycle.
+---
+ drivers/net/dsa/mt7530.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+
+---
+base-commit: 5c4c0edca68a5841a8d53ccd49596fe199c8334c
+change-id: 20240427-for-netnext-mt7530-do-not-disable-port5-when-phy-muxing-7ff5fd0995d7
+
+Best regards,
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1220,7 +1220,7 @@ mt7530_port_disable(struct dsa_switch *d
+ if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
+ return;
+
+- if (port == 5)
++ if (port == 5 && priv->p5_mode == GMAC5)
+ mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ else if (port == 6)
+ mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
projects / openwrt / staging / stintel.git / commitdiff