.cable_detect = atp86x_cable_detect,
};
-static const struct ide_port_info aec62xx_chipsets[] __devinitconst = {
+static const struct ide_port_info aec62xx_chipsets[] = {
{ /* 0: AEC6210 */
.name = DRV_NAME,
.init_chipset = init_chipset_aec62xx,
* chips, pass a local copy of 'struct ide_port_info' down the call chain.
*/
-static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
const struct chipset_bus_clock_list_entry *bus_clock;
struct ide_port_info d;
return err;
}
-static void __devexit aec62xx_remove(struct pci_dev *dev)
+static void aec62xx_remove(struct pci_dev *dev)
{
ide_pci_remove(dev);
pci_disable_device(dev);
.name = "AEC62xx_IDE",
.id_table = aec62xx_pci_tbl,
.probe = aec62xx_init_one,
- .remove = __devexit_p(aec62xx_remove),
+ .remove = aec62xx_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
* Sparc systems.
*/
-static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
+static void init_hwif_ali15x3(ide_hwif_t *hwif)
{
u8 ideic, inmir;
s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6,
* Set up the DMA functionality on the ALi 15x3.
*/
-static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
- const struct ide_port_info *d)
+static int init_dma_ali15x3(ide_hwif_t *hwif, const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long base = ide_pci_dma_base(hwif, d);
.dma_sff_read_status = ide_dma_sff_read_status,
};
-static const struct ide_port_info ali15x3_chipset __devinitconst = {
+static const struct ide_port_info ali15x3_chipset = {
.name = DRV_NAME,
.init_chipset = init_chipset_ali15x3,
.init_hwif = init_hwif_ali15x3,
* hot plug layer.
*/
-static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int alim15x3_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
struct ide_port_info d = ali15x3_chipset;
u8 rev = dev->revision, idx = id->driver_data;
.udma_mask = udma, \
}
-static const struct ide_port_info amd74xx_chipsets[] __devinitconst = {
+static const struct ide_port_info amd74xx_chipsets[] = {
/* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2),
/* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4),
/* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
/* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
};
-static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_port_info d;
u8 idx = id->driver_data;
.cable_detect = atiixp_cable_detect,
};
-static const struct ide_port_info atiixp_pci_info[] __devinitconst = {
+static const struct ide_port_info atiixp_pci_info[] = {
{ /* 0: IXP200/300/400/700 */
.name = DRV_NAME,
.enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
* finds a device matching our IDE device tables.
*/
-static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &atiixp_pci_info[id->driver_data], NULL);
}
.dma_sff_read_status = ide_dma_sff_read_status,
};
-static const struct ide_port_info cmd64x_chipsets[] __devinitconst = {
+static const struct ide_port_info cmd64x_chipsets[] = {
{ /* 0: CMD643 */
.name = DRV_NAME,
.init_chipset = init_chipset_cmd64x,
}
};
-static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_port_info d;
u8 idx = id->driver_data;
.set_dma_mode = cs5520_set_dma_mode,
};
-static const struct ide_port_info cyrix_chipset __devinitconst = {
+static const struct ide_port_info cyrix_chipset = {
.name = DRV_NAME,
.enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } },
.port_ops = &cs5520_port_ops,
* work longhand.
*/
-static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
const struct ide_port_info *d = &cyrix_chipset;
struct ide_hw hw[2], *hws[] = { NULL, NULL };
* performs channel-specific pre-initialization before drive probing.
*/
-static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
+static void init_hwif_cs5530 (ide_hwif_t *hwif)
{
unsigned long basereg;
u32 d0_timings;
.udma_filter = cs5530_udma_filter,
};
-static const struct ide_port_info cs5530_chipset __devinitconst = {
+static const struct ide_port_info cs5530_chipset = {
.name = DRV_NAME,
.init_chipset = init_chipset_cs5530,
.init_hwif = init_hwif_cs5530,
.udma_mask = ATA_UDMA2,
};
-static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &cs5530_chipset, NULL);
}
.cable_detect = cs5535_cable_detect,
};
-static const struct ide_port_info cs5535_chipset __devinitconst = {
+static const struct ide_port_info cs5535_chipset = {
.name = DRV_NAME,
.port_ops = &cs5535_port_ops,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
.udma_mask = ATA_UDMA4,
};
-static int __devinit cs5535_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &cs5535_chipset, NULL);
}
pci_dev_put(dev);
}
-static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
+static void init_iops_cy82c693(ide_hwif_t *hwif)
{
static ide_hwif_t *primary;
struct pci_dev *dev = to_pci_dev(hwif->dev);
.set_dma_mode = cy82c693_set_dma_mode,
};
-static const struct ide_port_info cy82c693_chipset __devinitconst = {
+static const struct ide_port_info cy82c693_chipset = {
.name = DRV_NAME,
.init_iops = init_iops_cy82c693,
.port_ops = &cy82c693_port_ops,
.mwdma_mask = ATA_MWDMA2,
};
-static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int cy82c693_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
struct pci_dev *dev2;
int ret = -ENODEV;
return ret;
}
-static void __devexit cy82c693_remove(struct pci_dev *dev)
+static void cy82c693_remove(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
.name = "Cypress_IDE",
.id_table = cy82c693_pci_tbl,
.probe = cy82c693_init_one,
- .remove = __devexit_p(cy82c693_remove),
+ .remove = cy82c693_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
.chipset = ide_pci,
};
-static int __devinit
-delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
+static int delkin_cb_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_host *host;
unsigned long base;
#define delkin_cb_resume NULL
#endif
-static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
+static struct pci_device_id delkin_cb_pci_tbl[] = {
{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0, },
}
};
-static const struct hpt_info hpt36x __devinitconst = {
+static const struct hpt_info hpt36x = {
.chip_name = "HPT36x",
.chip_type = HPT36x,
.udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2,
.timings = &hpt36x_timings
};
-static const struct hpt_info hpt370 __devinitconst = {
+static const struct hpt_info hpt370 = {
.chip_name = "HPT370",
.chip_type = HPT370,
.udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
.timings = &hpt37x_timings
};
-static const struct hpt_info hpt370a __devinitconst = {
+static const struct hpt_info hpt370a = {
.chip_name = "HPT370A",
.chip_type = HPT370A,
.udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
.timings = &hpt37x_timings
};
-static const struct hpt_info hpt374 __devinitconst = {
+static const struct hpt_info hpt374 = {
.chip_name = "HPT374",
.chip_type = HPT374,
.udma_mask = ATA_UDMA5,
.timings = &hpt37x_timings
};
-static const struct hpt_info hpt372 __devinitconst = {
+static const struct hpt_info hpt372 = {
.chip_name = "HPT372",
.chip_type = HPT372,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.timings = &hpt37x_timings
};
-static const struct hpt_info hpt372a __devinitconst = {
+static const struct hpt_info hpt372a = {
.chip_name = "HPT372A",
.chip_type = HPT372A,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.timings = &hpt37x_timings
};
-static const struct hpt_info hpt302 __devinitconst = {
+static const struct hpt_info hpt302 = {
.chip_name = "HPT302",
.chip_type = HPT302,
.udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.timings = &hpt37x_timings
};
-static const struct hpt_info hpt371 __devinitconst = {
+static const struct hpt_info hpt371 = {
.chip_name = "HPT371",
.chip_type = HPT371,
.udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.timings = &hpt37x_timings
};
-static const struct hpt_info hpt372n __devinitconst = {
+static const struct hpt_info hpt372n = {
.chip_name = "HPT372N",
.chip_type = HPT372N,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.timings = &hpt37x_timings
};
-static const struct hpt_info hpt302n __devinitconst = {
+static const struct hpt_info hpt302n = {
.chip_name = "HPT302N",
.chip_type = HPT302N,
.udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
.timings = &hpt37x_timings
};
-static const struct hpt_info hpt371n __devinitconst = {
+static const struct hpt_info hpt371n = {
.chip_name = "HPT371N",
.chip_type = HPT371N,
.udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
-static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
+static void init_hwif_hpt366(ide_hwif_t *hwif)
{
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 chip_type = info->chip_type;
}
}
-static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
+static int init_dma_hpt366(ide_hwif_t *hwif,
const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
return 0;
}
-static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
+static void hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
{
if (dev2->irq != dev->irq) {
/* FIXME: we need a core pci_set_interrupt() */
}
}
-static void __devinit hpt371_init(struct pci_dev *dev)
+static void hpt371_init(struct pci_dev *dev)
{
u8 mcr1 = 0;
pci_write_config_byte(dev, 0x50, mcr1 & ~0x04);
}
-static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
+static int hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
{
u8 mcr1 = 0, pin1 = 0, pin2 = 0;
.dma_sff_read_status = ide_dma_sff_read_status,
};
-static const struct ide_port_info hpt366_chipsets[] __devinitconst = {
+static const struct ide_port_info hpt366_chipsets[] = {
{ /* 0: HPT36x */
.name = DRV_NAME,
.init_chipset = init_chipset_hpt366,
* Called when the PCI registration layer (or the IDE initialization)
* finds a device matching our IDE device tables.
*/
-static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
const struct hpt_info *info = NULL;
struct hpt_info *dyn_info;
return ret;
}
-static void __devexit hpt366_remove(struct pci_dev *dev)
+static void hpt366_remove(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
struct ide_info *info = host->host_priv;
kfree(info);
}
-static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
+static const struct pci_device_id hpt366_pci_tbl[] = {
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 },
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 },
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 },
.name = "HPT366_IDE",
.id_table = hpt366_pci_tbl,
.probe = hpt366_init_one,
- .remove = __devexit_p(hpt366_remove),
+ .remove = hpt366_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
.chipset = ide_acorn,
};
-static int __devinit
-icside_register_v5(struct icside_state *state, struct expansion_card *ec)
+static int icside_register_v5(struct icside_state *state,
+ struct expansion_card *ec)
{
void __iomem *base;
struct ide_host *host;
.chipset = ide_acorn,
};
-static int __devinit
-icside_register_v6(struct icside_state *state, struct expansion_card *ec)
+static int icside_register_v6(struct icside_state *state,
+ struct expansion_card *ec)
{
void __iomem *ioc_base, *easi_base;
struct ide_host *host;
return ret;
}
-static int __devinit
-icside_probe(struct expansion_card *ec, const struct ecard_id *id)
+static int icside_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct icside_state *state;
void __iomem *idmem;
return ret;
}
-static void __devexit icside_remove(struct expansion_card *ec)
+static void icside_remove(struct expansion_card *ec)
{
struct icside_state *state = ecard_get_drvdata(ec);
static struct ecard_driver icside_driver = {
.probe = icside_probe,
- .remove = __devexit_p(icside_remove),
+ .remove = icside_remove,
.shutdown = icside_shutdown,
.id_table = icside_ids,
.drv = {
.udma_mask = ATA_UDMA6, \
}
-static const struct ide_port_info generic_chipsets[] __devinitconst = {
+static const struct ide_port_info generic_chipsets[] = {
/* 0: Unknown */
DECLARE_GENERIC_PCI_DEV(0),
* finds a device matching our IDE device tables.
*/
-static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
const struct ide_port_info *d = &generic_chipsets[id->driver_data];
int ret = -ENODEV;
#include <linux/interrupt.h>
#include <linux/io.h>
-static void __devinit plat_ide_setup_ports(struct ide_hw *hw,
- void __iomem *base,
- void __iomem *ctrl,
- struct pata_platform_info *pdata,
- int irq)
+static void plat_ide_setup_ports(struct ide_hw *hw, void __iomem *base,
+ void __iomem *ctrl,
+ struct pata_platform_info *pdata, int irq)
{
unsigned long port = (unsigned long)base;
int i;
.chipset = ide_generic,
};
-static int __devinit plat_ide_probe(struct platform_device *pdev)
+static int plat_ide_probe(struct platform_device *pdev)
{
struct resource *res_base, *res_alt, *res_irq;
void __iomem *base, *alt_base;
return ret;
}
-static int __devexit plat_ide_remove(struct platform_device *pdev)
+static int plat_ide_remove(struct platform_device *pdev)
{
struct ide_host *host = dev_get_drvdata(&pdev->dev);
.owner = THIS_MODULE,
},
.probe = plat_ide_probe,
- .remove = __devexit_p(plat_ide_remove),
+ .remove = plat_ide_remove,
};
static int __init platform_ide_init(void)
.set_dma_mode = it8172_set_dma_mode,
};
-static const struct ide_port_info it8172_port_info __devinitconst = {
+static const struct ide_port_info it8172_port_info = {
.name = DRV_NAME,
.port_ops = &it8172_port_ops,
.enablebits = { {0x41, 0x80, 0x80}, {0x00, 0x00, 0x00} },
.udma_mask = ATA_UDMA2,
};
-static int __devinit it8172_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
return -ENODEV; /* IT8172 is more than an IDE controller */
.cable_detect = it8213_cable_detect,
};
-static const struct ide_port_info it8213_chipset __devinitconst = {
+static const struct ide_port_info it8213_chipset = {
.name = DRV_NAME,
.enablebits = { {0x41, 0x80, 0x80} },
.port_ops = &it8213_port_ops,
* standard helper functions to do almost all the work for us.
*/
-static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &it8213_chipset, NULL);
}
* ide DMA handlers appropriately
*/
-static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
+static void init_hwif_it821x(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(dev);
.cable_detect = it821x_cable_detect,
};
-static const struct ide_port_info it821x_chipset __devinitconst = {
+static const struct ide_port_info it821x_chipset = {
.name = DRV_NAME,
.init_chipset = init_chipset_it821x,
.init_hwif = init_hwif_it821x,
* We then use the IDE PCI generic helper to do most of the work.
*/
-static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct it821x_dev *itdevs;
int rc;
return rc;
}
-static void __devexit it821x_remove(struct pci_dev *dev)
+static void it821x_remove(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
struct it821x_dev *itdevs = host->host_priv;
.name = "ITE821x IDE",
.id_table = it821x_pci_tbl,
.probe = it821x_init_one,
- .remove = __devexit_p(it821x_remove),
+ .remove = it821x_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
.cable_detect = jmicron_cable_detect,
};
-static const struct ide_port_info jmicron_chipset __devinitconst = {
+static const struct ide_port_info jmicron_chipset = {
.name = DRV_NAME,
.enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } },
.port_ops = &jmicron_port_ops,
* We then use the IDE PCI generic helper to do most of the work.
*/
-static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &jmicron_chipset, NULL);
}
.output_data = ide_output_data,
};
-static void __devinit superio_init_iops(struct hwif_s *hwif)
+static void superio_init_iops(struct hwif_s *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 dma_stat;
return (dma_stat & 7) != 4;
}
-static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
+static void init_hwif_ns87415 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int ctrl, using_inta;
.dma_sff_read_status = superio_dma_sff_read_status,
};
-static const struct ide_port_info ns87415_chipset __devinitconst = {
+static const struct ide_port_info ns87415_chipset = {
.name = DRV_NAME,
.init_hwif = init_hwif_ns87415,
.tp_ops = &ns87415_tp_ops,
IDE_HFLAG_NO_ATAPI_DMA,
};
-static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_port_info d = ns87415_chipset;
.set_pio_mode = opti621_set_pio_mode,
};
-static const struct ide_port_info opti621_chipset __devinitconst = {
+static const struct ide_port_info opti621_chipset = {
.name = DRV_NAME,
.enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
.port_ops = &opti621_port_ops,
.pio_mask = ATA_PIO4,
};
-static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &opti621_chipset, NULL);
}
palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio);
}
-static void __devinit palm_bk3710_chipinit(void __iomem *base)
+static void palm_bk3710_chipinit(void __iomem *base)
{
/*
* REVISIT: the ATA reset signal needs to be managed through a
return ATA_CBL_PATA80;
}
-static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif,
- const struct ide_port_info *d)
+static int palm_bk3710_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
{
printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
.cable_detect = palm_bk3710_cable_detect,
};
-static struct ide_port_info __devinitdata palm_bk3710_port_info = {
+static struct ide_port_info palm_bk3710_port_info = {
.init_dma = palm_bk3710_init_dma,
.port_ops = &palm_bk3710_ports_ops,
.dma_ops = &sff_dma_ops,
return 0;
}
-static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
+static struct pci_dev *pdc20270_get_dev2(struct pci_dev *dev)
{
struct pci_dev *dev2;
.udma_mask = udma, \
}
-static const struct ide_port_info pdcnew_chipsets[] __devinitconst = {
+static const struct ide_port_info pdcnew_chipsets[] = {
/* 0: PDC202{68,70} */ DECLARE_PDCNEW_DEV(ATA_UDMA5),
/* 1: PDC202{69,71,75,76,77} */ DECLARE_PDCNEW_DEV(ATA_UDMA6),
};
* finds a device matching our IDE device tables.
*/
-static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
const struct ide_port_info *d = &pdcnew_chipsets[id->driver_data];
struct pci_dev *bridge = dev->bus->self;
return ide_pci_init_one(dev, d, NULL);
}
-static void __devexit pdc202new_remove(struct pci_dev *dev)
+static void pdc202new_remove(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
.name = "Promise_IDE",
.id_table = pdc202new_pci_tbl,
.probe = pdc202new_init_one,
- .remove = __devexit_p(pdc202new_remove),
+ .remove = pdc202new_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
return 0;
}
-static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
- const char *name)
+static void pdc202ata4_fixup_irq(struct pci_dev *dev, const char *name)
{
if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) {
u8 irq = 0, irq2 = 0;
.max_sectors = sectors, \
}
-static const struct ide_port_info pdc202xx_chipsets[] __devinitconst = {
+static const struct ide_port_info pdc202xx_chipsets[] = {
{ /* 0: PDC20246 */
.name = DRV_NAME,
.init_chipset = init_chipset_pdc202xx,
* finds a device matching our IDE device tables.
*/
-static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int pdc202xx_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
const struct ide_port_info *d;
u8 idx = id->driver_data;
* capabilities of the hardware.
*/
-static void __devinit init_hwif_piix(ide_hwif_t *hwif)
+static void init_hwif_piix(ide_hwif_t *hwif)
{
if (!hwif->dma_base)
return;
.udma_mask = udma, \
}
-static const struct ide_port_info piix_pci_info[] __devinitconst = {
+static const struct ide_port_info piix_pci_info[] = {
/* 0: MPIIX */
{ /*
* MPIIX actually has only a single IDE channel mapped to
* finds a device matching our IDE device tables.
*/
-static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int piix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &piix_pci_info[id->driver_data], NULL);
}
* they are found, disable use of DMA IDE
*/
-static void __devinit piix_check_450nx(void)
+static void piix_check_450nx(void)
{
struct pci_dev *pdev = NULL;
u16 cfg;
* Setup, register & probe an IDE channel driven by this driver, this is
* called by one of the 2 probe functions (macio or PCI).
*/
-static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif,
- struct ide_hw *hw)
+static int pmac_ide_setup_device(pmac_ide_hwif_t *pmif, struct ide_hw *hw)
{
struct device_node *np = pmif->node;
const int *bidp;
return rc;
}
-static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base)
+static void pmac_ide_init_ports(struct ide_hw *hw, unsigned long base)
{
int i;
/*
* Attach to a macio probed interface
*/
-static int __devinit
-pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
+static int pmac_ide_macio_attach(struct macio_dev *mdev,
+ const struct of_device_id *match)
{
void __iomem *base;
unsigned long regbase;
/*
* Attach to a PCI probed interface
*/
-static int __devinit
-pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
+static int pmac_ide_pci_attach(struct pci_dev *pdev,
+ const struct pci_device_id *id)
{
struct device_node *np;
pmac_ide_hwif_t *pmif;
* Allocate the data structures needed for using DMA with an interface
* and fill the proper list of functions pointers
*/
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
- const struct ide_port_info *d)
+static int pmac_ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
{
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
hw->irq = irq;
}
-static int __devinit
-rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
+static int rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
{
void __iomem *base;
struct ide_host *host;
return ret;
}
-static void __devexit rapide_remove(struct expansion_card *ec)
+static void rapide_remove(struct expansion_card *ec)
{
struct ide_host *host = ecard_get_drvdata(ec);
static struct ecard_driver rapide_driver = {
.probe = rapide_probe,
- .remove = __devexit_p(rapide_remove),
+ .remove = rapide_remove,
.id_table = rapide_ids,
.drv = {
.name = "rapide",
#define DRV_NAME "rz1000"
-static int __devinit rz1000_disable_readahead(struct pci_dev *dev)
+static int rz1000_disable_readahead(struct pci_dev *dev)
{
u16 reg;
}
}
-static const struct ide_port_info rz1000_chipset __devinitconst = {
+static const struct ide_port_info rz1000_chipset = {
.name = DRV_NAME,
.host_flags = IDE_HFLAG_NO_DMA,
};
-static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_port_info d = rz1000_chipset;
int rc;
.dma_sff_read_status = ide_dma_sff_read_status,
};
-static const struct ide_port_info sc1200_chipset __devinitconst = {
+static const struct ide_port_info sc1200_chipset = {
.name = DRV_NAME,
.port_ops = &sc1200_port_ops,
.dma_ops = &sc1200_dma_ops,
.udma_mask = ATA_UDMA2,
};
-static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct sc1200_saved_state *ss = NULL;
int rc;
* Perform the initial set up for this device.
*/
-static int __devinit init_setup_scc(struct pci_dev *dev,
- const struct ide_port_info *d)
+static int init_setup_scc(struct pci_dev *dev, const struct ide_port_info *d)
{
unsigned long ctl_base;
unsigned long dma_base;
*
*/
-static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
+static void init_mmio_iops_scc(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct scc_ports *ports = pci_get_drvdata(dev);
* and then do the MMIO setup.
*/
-static void __devinit init_iops_scc(ide_hwif_t *hwif)
+static void init_iops_scc(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
init_mmio_iops_scc(hwif);
}
-static int __devinit scc_init_dma(ide_hwif_t *hwif,
- const struct ide_port_info *d)
+static int scc_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
{
return ide_allocate_dma_engine(hwif);
}
* ide DMA handlers appropriately.
*/
-static void __devinit init_hwif_scc(ide_hwif_t *hwif)
+static void init_hwif_scc(ide_hwif_t *hwif)
{
/* PTERADD */
out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
.dma_sff_read_status = scc_dma_sff_read_status,
};
-static const struct ide_port_info scc_chipset __devinitconst = {
+static const struct ide_port_info scc_chipset = {
.name = "sccIDE",
.init_iops = init_iops_scc,
.init_dma = scc_init_dma,
* We then use the IDE PCI generic helper to do most of the work.
*/
-static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return init_setup_scc(dev, &scc_chipset);
}
* Called by the PCI code when it removes an SCC PATA controller.
*/
-static void __devexit scc_remove(struct pci_dev *dev)
+static void scc_remove(struct pci_dev *dev)
{
struct scc_ports *ports = pci_get_drvdata(dev);
struct ide_host *host = ports->host;
.name = "SCC IDE",
.id_table = scc_pci_tbl,
.probe = scc_init_one,
- .remove = __devexit_p(scc_remove),
+ .remove = scc_remove,
};
static int __init scc_ide_init(void)
.cable_detect = svwks_cable_detect,
};
-static const struct ide_port_info serverworks_chipsets[] __devinitconst = {
+static const struct ide_port_info serverworks_chipsets[] = {
{ /* 0: OSB4 */
.name = DRV_NAME,
.init_chipset = init_chipset_svwks,
* finds a device matching our IDE device tables.
*/
-static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_port_info d;
u8 idx = id->driver_data;
}
/* Creates a DMA map for the scatter-gather list entries */
-static int __devinit ide_dma_sgiioc4(ide_hwif_t *hwif,
- const struct ide_port_info *d)
+static int ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
.dma_lost_irq = sgiioc4_dma_lost_irq,
};
-static const struct ide_port_info sgiioc4_port_info __devinitconst = {
+static const struct ide_port_info sgiioc4_port_info = {
.name = DRV_NAME,
.chipset = ide_pci,
.init_dma = ide_dma_sgiioc4,
.mwdma_mask = ATA_MWDMA2_ONLY,
};
-static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
+static int sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
{
unsigned long cmd_base, irqport;
unsigned long bar0, cmd_phys_base, ctl;
return rc;
}
-static unsigned int __devinit pci_init_sgiioc4(struct pci_dev *dev)
+static unsigned int pci_init_sgiioc4(struct pci_dev *dev)
{
int ret;
return ret;
}
-int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd)
+int ioc4_ide_attach_one(struct ioc4_driver_data *idd)
{
/*
* PCI-RT does not bring out IDE connection.
return pci_init_sgiioc4(idd->idd_pdev);
}
-static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
+static struct ioc4_submodule ioc4_ide_submodule = {
.is_name = "IOC4_ide",
.is_owner = THIS_MODULE,
.is_probe = ioc4_ide_attach_one,
* extended PRD tables. For better SI3112 support use the libata driver
*/
-static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
+static void init_mmio_iops_siimage(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(dev);
* can get the iops right before using them.
*/
-static void __devinit init_iops_siimage(ide_hwif_t *hwif)
+static void init_iops_siimage(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(dev);
.udma_mask = ATA_UDMA6, \
}
-static const struct ide_port_info siimage_chipsets[] __devinitconst = {
+static const struct ide_port_info siimage_chipsets[] = {
/* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops),
/* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
};
* We then use the IDE PCI generic helper to do most of the work.
*/
-static int __devinit siimage_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
void __iomem *ioaddr = NULL;
resource_size_t bar5 = pci_resource_start(dev, 5);
return rc;
}
-static void __devexit siimage_remove(struct pci_dev *dev)
+static void siimage_remove(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
void __iomem *ioaddr = host->host_priv;
.name = "SiI_IDE",
.id_table = siimage_pci_tbl,
.probe = siimage_init_one,
- .remove = __devexit_p(siimage_remove),
+ .remove = siimage_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
}
-static int __devinit sis_find_family(struct pci_dev *dev)
+static int sis_find_family(struct pci_dev *dev)
{
struct pci_dev *host;
int i = 0;
.cable_detect = sis_cable_detect,
};
-static const struct ide_port_info sis5513_chipset __devinitconst = {
+static const struct ide_port_info sis5513_chipset = {
.name = DRV_NAME,
.init_chipset = init_chipset_sis5513,
.enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} },
.mwdma_mask = ATA_MWDMA2,
};
-static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_port_info d = sis5513_chipset;
u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
return ide_pci_init_one(dev, &d, NULL);
}
-static void __devexit sis5513_remove(struct pci_dev *dev)
+static void sis5513_remove(struct pci_dev *dev)
{
ide_pci_remove(dev);
pci_disable_device(dev);
.name = "SIS_IDE",
.id_table = sis5513_pci_tbl,
.probe = sis5513_init_one,
- .remove = __devexit_p(sis5513_remove),
+ .remove = sis5513_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
.dma_sff_read_status = ide_dma_sff_read_status,
};
-static const struct ide_port_info sl82c105_chipset __devinitconst = {
+static const struct ide_port_info sl82c105_chipset = {
.name = DRV_NAME,
.init_chipset = init_chipset_sl82c105,
.enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
.mwdma_mask = ATA_MWDMA2,
};
-static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_port_info d = sl82c105_chipset;
u8 rev = sl82c105_bridge_revision(dev);
.cable_detect = slc90e66_cable_detect,
};
-static const struct ide_port_info slc90e66_chipset __devinitconst = {
+static const struct ide_port_info slc90e66_chipset = {
.name = DRV_NAME,
.enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} },
.port_ops = &slc90e66_port_ops,
.udma_mask = ATA_UDMA4,
};
-static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int slc90e66_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &slc90e66_chipset, NULL);
}
return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
-static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
+static void init_hwif_tc86c001(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long sc_base = pci_resource_start(dev, 5);
.dma_sff_read_status = ide_dma_sff_read_status,
};
-static const struct ide_port_info tc86c001_chipset __devinitconst = {
+static const struct ide_port_info tc86c001_chipset = {
.name = DRV_NAME,
.init_hwif = init_hwif_tc86c001,
.port_ops = &tc86c001_port_ops,
.udma_mask = ATA_UDMA4,
};
-static int __devinit tc86c001_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int tc86c001_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
int rc;
return rc;
}
-static void __devexit tc86c001_remove(struct pci_dev *dev)
+static void tc86c001_remove(struct pci_dev *dev)
{
ide_pci_remove(dev);
pci_release_region(dev, 5);
.name = "TC86C001",
.id_table = tc86c001_pci_tbl,
.probe = tc86c001_init_one,
- .remove = __devexit_p(tc86c001_remove),
+ .remove = tc86c001_remove,
};
static int __init tc86c001_ide_init(void)
.set_dma_mode = triflex_set_mode,
};
-static const struct ide_port_info triflex_device __devinitconst = {
+static const struct ide_port_info triflex_device = {
.name = DRV_NAME,
.enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
.port_ops = &triflex_port_ops,
.mwdma_mask = ATA_MWDMA2,
};
-static int __devinit triflex_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &triflex_device, NULL);
}
{
}
-static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
+static void init_hwif_trm290(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int cfg_base = pci_resource_start(dev, 4);
.dma_check = trm290_dma_check,
};
-static const struct ide_port_info trm290_chipset __devinitconst = {
+static const struct ide_port_info trm290_chipset = {
.name = DRV_NAME,
.init_hwif = init_hwif_trm290,
.tp_ops = &trm290_tp_ops,
IDE_HFLAG_NO_LBA48,
};
-static int __devinit trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &trm290_chipset, NULL);
}
.cable_detect = via82cxxx_cable_detect,
};
-static const struct ide_port_info via82cxxx_chipset __devinitconst = {
+static const struct ide_port_info via82cxxx_chipset = {
.name = DRV_NAME,
.init_chipset = init_chipset_via82cxxx,
.enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
.mwdma_mask = ATA_MWDMA2,
};
-static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct pci_dev *isa = NULL;
struct via_isa_bridge *via_config;
return rc;
}
-static void __devexit via_remove(struct pci_dev *dev)
+static void via_remove(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
struct via82cxxx_dev *vdev = host->host_priv;
.name = "VIA_IDE",
.id_table = via_pci_tbl,
.probe = via_init_one,
- .remove = __devexit_p(via_remove),
+ .remove = via_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};