glinet,gl-mt3000)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
;;
+glinet,gl-mt6000)
+ local envdev=$(find_mmc_part "u-boot-env")
+ ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
+ ;;
mercusys,mr90x-v1)
local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
FIP_COMPRESS:=1
endef
+define U-Boot/mt7986_glinet_gl-mt6000
+ NAME:=GL.iNet GL-MT6000
+ BUILD_SUBTARGET:=filogic
+ BUILD_DEVICES:=glinet_gl-mt6000
+ UBOOT_CONFIG:=mt7986a_glinet_gl-mt6000
+ UBOOT_IMAGE:=u-boot.fip
+ BL2_BOOTDEV:=emmc
+ BL2_SOC:=mt7986
+ BL2_DDRTYPE:=ddr4
+ DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
+endef
+
define U-Boot/mt7986_tplink_tl-xdr4288
NAME:=TP-LINK TL-XDR4288
BUILD_SUBTARGET:=filogic
mt7986_bananapi_bpi-r3-sdmmc \
mt7986_bananapi_bpi-r3-snand \
mt7986_bananapi_bpi-r3-nor \
+ mt7986_glinet_gl-mt6000 \
mt7986_tplink_tl-xdr4288 \
mt7986_tplink_tl-xdr6086 \
mt7986_tplink_tl-xdr6088 \
--- /dev/null
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-glinet-gl-mt6000.dts
+@@ -0,0 +1,135 @@
++// SPDX-License-Identifier: GPL-2.0
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include <dt-bindings/gpio/gpio.h>
++
++#include "mt7986.dtsi"
++
++/ {
++ model = "GL.iNet GL-MT6000";
++ compatible = "glinet,gl-mt6000", "mediatek,mt7986-emmc-rfb", "mediatek,mt7986";
++
++ chosen {
++ stdout-path = &uart0;
++ tick-timer = &timer0;
++ };
++
++ memory@40000000 {
++ device_type = "memory";
++ reg = <0x40000000 0x40000000>;
++ };
++
++ reg_1p8v: regulator-1p8v {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-1.8V";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ reg_3p3v: regulator-3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-3.3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ keys {
++ compatible = "gpio-keys";
++
++ wps {
++ label = "reset";
++ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++ linux,code = <KEY_RESTART>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led_status_blue: green {
++ label = "blue:status";
++ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
++ };
++
++ led_status_white: blue {
++ label = "white:status";
++ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++};
++
++&uart0 {
++ mediatek,force-highspeed;
++ status = "okay";
++};
++
++ð {
++ status = "okay";
++ mediatek,gmac-id = <0>;
++ phy-mode = "2500base-x";
++ mediatek,switch = "mt7531";
++ reset-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
++
++ fixed-link {
++ speed = <2500>;
++ full-duplex;
++ };
++};
++
++&pinctrl {
++ mmc0_pins_default: mmc0default {
++ mux {
++ function = "flash";
++ groups = "emmc_51";
++ };
++
++ conf-cmd-dat {
++ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
++ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
++ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
++ input-enable;
++ drive-strength = <MTK_DRIVE_4mA>;
++ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++ };
++
++ conf-clk {
++ pins = "EMMC_CK";
++ drive-strength = <MTK_DRIVE_6mA>;
++ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++ };
++
++ conf-dsl {
++ pins = "EMMC_DSL";
++ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++ };
++
++ conf-rst {
++ pins = "EMMC_RSTB";
++ drive-strength = <MTK_DRIVE_4mA>;
++ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++ };
++ };
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_default>;
++ bus-width = <8>;
++ max-frequency = <200000000>;
++ cap-mmc-highspeed;
++ cap-mmc-hw-reset;
++ vmmc-supply = <®_3p3v>;
++ vqmmc-supply = <®_1p8v>;
++ non-removable;
++ status = "okay";
++};
++
++&wmcpu_emi {
++ status = "disabled";
++};
+--- /dev/null
++++ b/configs/mt7986a_glinet_gl-mt6000_defconfig
+@@ -0,0 +1,105 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x80000
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-glinet-gl-mt6000"
++CONFIG_SYS_PROMPT="MT7986> "
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7986=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_AHCI=y
++CONFIG_FIT=y
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-glinet-gl-mt6000.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="glinet_gl-mt6000_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/glinet_gl-mt6000_env
+@@ -0,0 +1,25 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++bootdelay=3
++bootfile_bl2=openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip
++bootfile_firmware=openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_title= *** U-Boot Boot Menu for GL-iNet GL-MT6000 ***
++bootmenu_0=Startup system (Default).=run boot_system
++bootmenu_1=Load Firmware via TFTP then write to eMMC.=run boot_tftp_firmware ; run bootmenu_confirm_return
++bootmenu_2=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_3=mLoad BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_4=Reboot.=reset
++bootmenu_5=Reset all settings to factory defaults.=run reset_factory ; reset
++filesize_to_blk=setexpr cnt $filesize + 0x1ff && setexpr cnt $cnt / 0x200
++mmc_read_kernel=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr $part_addr $image_size
++boot_system=part start mmc 0 kernel part_addr && part size mmc 0 kernel part_size && run mmc_read_kernel && bootm
++boot_tftp_firmware=tftpboot $loadaddr $bootfile_firmware && run emmc_write_firmware
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++emmc_write_firmware=part start mmc 0 kernel part_addr && run filesize_to_blk && mmc write $loadaddr $part_addr $cnt
++emmc_write_bl2=run filesize_to_blk && test 0x$cnt -le 0x800 && mmc partconf 0 1 1 1 && && mmc write $loadaddr 0x0 0x800 ; mmc partconf 0 1 1 0
++emmc_write_fip=part start mmc 0 fip part_addr && part size mmc 0 fip part_size && run filesize_to_blk && test 0x$cnt -le 0x$part_size && mmc write $loadaddr $part_addr $cnt
++reset_factory=eraseenv && reset
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+ model = "GL.iNet GL-MT6000";
+ compatible = "glinet,gl-mt6000", "mediatek,mt7986a";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-append = " root=PARTLABEL=rootfs rootwait";
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1.8vd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_run: led@0 {
+ label = "blue:run";
+ gpios = <&pio 38 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led@1 {
+ label = "white:system";
+ gpios = <&pio 37 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+ð {
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "2500base-x";
+ phy-handle = <&phy1>;
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <1>;
+ reset-assert-us = <100000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&pio>;
+ interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+ realtek,aldps-enable;
+ };
+
+ phy7: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <7>;
+ reset-assert-us = <100000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&pio 19 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&pio>;
+ interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+ realtek,aldps-enable;
+ };
+
+ switch: switch@31 {
+ compatible = "mediatek,mt7531";
+ reg = <31>;
+ reset-gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan2";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan4";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan5";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan1";
+ phy-handle = <&phy7>;
+ phy-mode = "2500base-x";
+ };
+
+ port@6 {
+ reg = <6>;
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+ };
+};
+
+&pio {
+ wf_2g_5g_pins: wf_2g_5g-pins {
+ mux {
+ function = "wifi";
+ groups = "wf_2g", "wf_5g";
+ };
+ conf {
+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+ "WF1_TOP_CLK", "WF1_TOP_DATA";
+ drive-strength = <4>;
+ };
+ };
+
+ mmc0_pins_default: mmc0-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ mediatek,pull-up-adv = <1>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ mediatek,pull-down-adv = <2>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ mediatek,pull-down-adv = <2>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ mediatek,pull-up-adv = <1>; /* pull-up 10K */
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ mediatek,pull-up-adv = <1>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ mediatek,pull-down-adv = <2>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ mediatek,pull-down-adv = <2>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ mediatek,pull-up-adv = <1>; /* pull-up 10K */
+ };
+ };
+};
+
+&crypto {
+ status = "okay";
+};
+
+&ssusb {
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <&usb_vbus>;
+ status = "okay";
+};
+
+&trng {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wifi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wf_2g_5g_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ hs400-ds-delay = <0x14014>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
qihoo,360t7)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
;;
+ glinet,gl-mt6000|\
tplink,tl-xdr4288|\
tplink,tl-xdr6088)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1
wan_mac=$(macaddr_add "$lan_mac" 3)
label_mac=$lan_mac
;;
+ glinet,gl-mt6000)
+ label_mac=$(mmc_get_mac_binary factory 0x0a)
+ wan_mac=$label_mac
+ lan_mac=$(macaddr_add "$label_mac" 2)
+ ;;
h3c,magic-nx30-pro)
wan_mac=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
esac
;;
+"mediatek/mt7986_eeprom_mt7976_dual.bin")
+ case "$board" in
+ glinet,gl-mt6000)
+ caldata_extract_mmc "factory" 0x0 0x1000
+ ;;
+ esac
+ ;;
*)
exit 1
;;
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
;;
+ glinet,gl-mt6000)
+ addr=$(mmc_get_mac_binary factory 0x04)
+ [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+ ;;
h3c,magic-nx30-pro)
addr=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
cudy,wr3000-v1)
default_do_upgrade "$1"
;;
+ glinet,gl-mt6000)
+ CI_KERNPART="kernel"
+ CI_ROOTPART="rootfs"
+ emmc_do_upgrade "$1"
+ ;;
mercusys,mr90x-v1)
CI_UBIPART="ubi0"
nand_do_upgrade "$1"
;;
esac
;;
+ glinet,gl-mt6000|\
ubnt,unifi-6-plus)
emmc_copy_config
;;
endef
TARGET_DEVICES += glinet_gl-mt3000
+define Device/glinet_gl-mt6000
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-MT6000
+ DEVICE_DTS := mt7986a-glinet-gl-mt6000
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
+ ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot glinet_gl-mt6000
+endef
+TARGET_DEVICES += glinet_gl-mt6000
+
define Device/h3c_magic-nx30-pro
DEVICE_VENDOR := H3C
DEVICE_MODEL := Magic NX30 Pro
projects / openwrt / staging / thess.git / commitdiff