endif
LINUX_VERSION-4.14 = .187
-LINUX_VERSION-4.19 = .131
+LINUX_VERSION-4.19 = .138
LINUX_VERSION-5.4 = .52
LINUX_KERNEL_HASH-4.14.187 = 5b223475eaeea196aa7e127d3f253bca5c35d8afdc72ca75230ce1ecdd1454bd
-LINUX_KERNEL_HASH-4.19.131 = 19dfb9f6cc4ba30104b65dcce7d78240a4ae188cb366747d5f8eae35e98964ba
+LINUX_KERNEL_HASH-4.19.138 = d15c27d05f6c527269b75b30cc72972748e55720e7e00ad8abbaa4fe3b1d5e02
LINUX_KERNEL_HASH-5.4.52 = 037efa531120b1c20ff55e78cd3e17288b1804b3a57dc31de760837b3bea5d3a
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
#include "xhci.h"
#include "xhci-trace.h"
-@@ -265,6 +267,458 @@ static void xhci_pme_acpi_rtd3_enable(st
+@@ -268,6 +270,458 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
-@@ -306,6 +760,22 @@ static int xhci_pci_probe(struct pci_dev
+@@ -309,6 +763,22 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
driver = (struct hc_driver *)id->driver_data;
/* Prevent runtime suspending between USB-2 and USB-3 initialization */
-@@ -364,6 +834,16 @@ static void xhci_pci_remove(struct pci_d
+@@ -367,6 +837,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;
#include <net/if_inet6.h>
--- a/include/net/inet_ecn.h
+++ b/include/net/inet_ecn.h
-@@ -125,9 +125,9 @@ static inline int IP6_ECN_set_ce(struct
+@@ -126,9 +126,9 @@ static inline int IP6_ECN_set_ce(struct
if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
return 0;
EXPORT_SYMBOL(xfrm_parse_spi);
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
-@@ -3906,14 +3906,16 @@ static bool tcp_parse_aligned_timestamp(
+@@ -3907,14 +3907,16 @@ static bool tcp_parse_aligned_timestamp(
{
const __be32 *ptr = (const __be32 *)(th + 1);
+ bool rev = !skb->_nfct, upd = false;
+ __be32 ip;
- if (tc_skb_protocol(skb) != htons(ETH_P_IP))
+ if (skb_protocol(skb, true) != htons(ETH_P_IP))
- return;
+ return false;
.link_down = phylink_sfp_link_down,
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
-@@ -350,7 +350,7 @@ static int sfp_register_bus(struct sfp_b
+@@ -425,7 +425,7 @@ static int sfp_register_bus(struct sfp_b
bus->socket_ops->attach(bus->sfp);
if (bus->started)
bus->socket_ops->start(bus->sfp);
bus->registered = true;
return 0;
}
-@@ -359,8 +359,8 @@ static void sfp_unregister_bus(struct sf
+@@ -434,8 +434,8 @@ static void sfp_unregister_bus(struct sf
{
const struct sfp_upstream_ops *ops = bus->upstream_ops;
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
-@@ -23,7 +23,6 @@ struct sfp_bus {
+@@ -30,7 +30,6 @@ struct sfp_bus {
const struct sfp_upstream_ops *upstream_ops;
void *upstream;
struct phy_device *phydev;
bool registered;
-@@ -442,13 +441,11 @@ static void sfp_upstream_clear(struct sf
+@@ -517,13 +516,11 @@ static void sfp_upstream_clear(struct sf
{
bus->upstream_ops = NULL;
bus->upstream = NULL;
* @upstream: the upstream private data
* @ops: the upstream's &struct sfp_upstream_ops
*
-@@ -459,7 +456,7 @@ static void sfp_upstream_clear(struct sf
+@@ -534,7 +531,7 @@ static void sfp_upstream_clear(struct sf
* On error, returns %NULL.
*/
struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
const struct sfp_upstream_ops *ops)
{
struct sfp_bus *bus = sfp_bus_get(fwnode);
-@@ -469,7 +466,6 @@ struct sfp_bus *sfp_register_upstream(st
+@@ -544,7 +541,6 @@ struct sfp_bus *sfp_register_upstream(st
rtnl_lock();
bus->upstream_ops = ops;
bus->upstream = upstream;
if (bus->sfp) {
ret = sfp_register_bus(bus);
-@@ -591,7 +587,7 @@ struct sfp_bus *sfp_register_socket(stru
+@@ -670,7 +666,7 @@ struct sfp_bus *sfp_register_socket(stru
bus->sfp = sfp;
bus->socket_ops = ops;
ret = sfp_register_bus(bus);
if (ret)
sfp_socket_clear(bus);
-@@ -611,7 +607,7 @@ EXPORT_SYMBOL_GPL(sfp_register_socket);
+@@ -690,7 +686,7 @@ EXPORT_SYMBOL_GPL(sfp_register_socket);
void sfp_unregister_socket(struct sfp_bus *bus)
{
rtnl_lock();
#include <linux/rtnetlink.h>
#include <linux/slab.h>
-@@ -444,45 +445,63 @@ static void sfp_upstream_clear(struct sf
+@@ -519,45 +520,63 @@ static void sfp_upstream_clear(struct sf
}
/**
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
-@@ -328,10 +328,19 @@ static void sfp_bus_release(struct kref
+@@ -403,10 +403,19 @@ static void sfp_bus_release(struct kref
kfree(bus);
}
static int sfp_register_bus(struct sfp_bus *bus)
{
-@@ -347,11 +356,11 @@ static int sfp_register_bus(struct sfp_b
+@@ -422,11 +431,11 @@ static int sfp_register_bus(struct sfp_b
return ret;
}
}
return 0;
}
-@@ -445,13 +454,12 @@ static void sfp_upstream_clear(struct sf
+@@ -520,13 +529,12 @@ static void sfp_upstream_clear(struct sf
}
/**
*
* Returns: on success, a pointer to the sfp_bus structure,
* %NULL if no SFP is specified,
-@@ -461,9 +469,7 @@ static void sfp_upstream_clear(struct sf
+@@ -536,9 +544,7 @@ static void sfp_upstream_clear(struct sf
* %-ENOMEM if we failed to allocate the bus.
* an error from the upstream's connect_phy() method.
*/
{
struct fwnode_reference_args ref;
struct sfp_bus *bus;
-@@ -481,7 +487,39 @@ struct sfp_bus *sfp_register_upstream_no
+@@ -556,7 +562,39 @@ struct sfp_bus *sfp_register_upstream_no
if (!bus)
return ERR_PTR(-ENOMEM);
bus->upstream_ops = ops;
bus->upstream = upstream;
-@@ -494,33 +532,33 @@ struct sfp_bus *sfp_register_upstream_no
+@@ -569,33 +607,33 @@ struct sfp_bus *sfp_register_upstream_no
}
rtnl_unlock();
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
-@@ -330,7 +330,7 @@ static void sfp_bus_release(struct kref
+@@ -405,7 +405,7 @@ static void sfp_bus_release(struct kref
/**
* sfp_bus_put() - put a reference on the &struct sfp_bus
+++ /dev/null
-From 8df5dd55cef48c0769379e04dbc085a899b106d4 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 8 Mar 2019 14:02:25 +0000
-Subject: [PATCH 640/660] net: sfp: add support for module quirks
-
-Add support for applying module quirks to the list of supported
-ethtool link modes.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp-bus.c | 54 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 54 insertions(+)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -9,6 +9,12 @@
-
- #include "sfp.h"
-
-+struct sfp_quirk {
-+ const char *vendor;
-+ const char *part;
-+ void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes);
-+};
-+
- /**
- * struct sfp_bus - internal representation of a sfp bus
- */
-@@ -21,6 +27,7 @@ struct sfp_bus {
- const struct sfp_socket_ops *socket_ops;
- struct device *sfp_dev;
- struct sfp *sfp;
-+ const struct sfp_quirk *sfp_quirk;
-
- const struct sfp_upstream_ops *upstream_ops;
- void *upstream;
-@@ -30,6 +37,46 @@ struct sfp_bus {
- bool started;
- };
-
-+static const struct sfp_quirk sfp_quirks[] = {
-+};
-+
-+static size_t sfp_strlen(const char *str, size_t maxlen)
-+{
-+ size_t size, i;
-+
-+ /* Trailing characters should be filled with space chars */
-+ for (i = 0, size = 0; i < maxlen; i++)
-+ if (str[i] != ' ')
-+ size = i + 1;
-+
-+ return size;
-+}
-+
-+static bool sfp_match(const char *qs, const char *str, size_t len)
-+{
-+ if (!qs)
-+ return true;
-+ if (strlen(qs) != len)
-+ return false;
-+ return !strncmp(qs, str, len);
-+}
-+
-+static const struct sfp_quirk *sfp_lookup_quirk(const struct sfp_eeprom_id *id)
-+{
-+ const struct sfp_quirk *q;
-+ unsigned int i;
-+ size_t vs, ps;
-+
-+ vs = sfp_strlen(id->base.vendor_name, ARRAY_SIZE(id->base.vendor_name));
-+ ps = sfp_strlen(id->base.vendor_pn, ARRAY_SIZE(id->base.vendor_pn));
-+
-+ for (i = 0, q = sfp_quirks; i < ARRAY_SIZE(sfp_quirks); i++, q++)
-+ if (sfp_match(q->vendor, id->base.vendor_name, vs) &&
-+ sfp_match(q->part, id->base.vendor_pn, ps))
-+ return q;
-+
-+ return NULL;
-+}
- /**
- * sfp_parse_port() - Parse the EEPROM base ID, setting the port type
- * @bus: a pointer to the &struct sfp_bus structure for the sfp module
-@@ -233,6 +280,9 @@ void sfp_parse_support(struct sfp_bus *b
- phylink_set(modes, 1000baseX_Full);
- }
-
-+ if (bus->sfp_quirk)
-+ bus->sfp_quirk->modes(id, modes);
-+
- bitmap_or(support, support, modes, __ETHTOOL_LINK_MODE_MASK_NBITS);
-
- phylink_set(support, Autoneg);
-@@ -609,6 +659,8 @@ int sfp_module_insert(struct sfp_bus *bu
- const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
- int ret = 0;
-
-+ bus->sfp_quirk = sfp_lookup_quirk(id);
-+
- if (ops && ops->module_insert)
- ret = ops->module_insert(bus->upstream, id);
-
-@@ -622,6 +674,8 @@ void sfp_module_remove(struct sfp_bus *b
-
- if (ops && ops->module_remove)
- ops->module_remove(bus->upstream);
-+
-+ bus->sfp_quirk = NULL;
- }
- EXPORT_SYMBOL_GPL(sfp_module_remove);
-
+++ /dev/null
-From ecaa542cfed078dbc356dadff0bad4b6a8e704a0 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 17 May 2019 10:14:45 +0100
-Subject: [PATCH 641/660] net: sfp: add some quirks for GPON modules
-
-Marc Micalizzi reports that Huawei MA5671A and Alcatel/Lucent G-010S-P
-modules are capable of 2500base-X, but incorrectly report their
-capabilities in the EEPROM. It seems rather common that GPON modules
-mis-report.
-
-Let's fix these modules by adding some quirks.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp-bus.c | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -37,7 +37,32 @@ struct sfp_bus {
- bool started;
- };
-
-+static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
-+ unsigned long *modes)
-+{
-+ phylink_set(modes, 2500baseX_Full);
-+}
-+
- static const struct sfp_quirk sfp_quirks[] = {
-+ {
-+ // Alcatel Lucent G-010S-P can operate at 2500base-X, but
-+ // incorrectly report 2500MBd NRZ in their EEPROM
-+ .vendor = "ALCATELLUCENT",
-+ .part = "G010SP",
-+ .modes = sfp_quirk_2500basex,
-+ }, {
-+ // Alcatel Lucent G-010S-A can operate at 2500base-X, but
-+ // report 3.2GBd NRZ in their EEPROM
-+ .vendor = "ALCATELLUCENT",
-+ .part = "3FE46541AA",
-+ .modes = sfp_quirk_2500basex,
-+ }, {
-+ // Huawei MA5671A can operate at 2500base-X, but report 1.2GBd
-+ // NRZ in their EEPROM
-+ .vendor = "HUAWEI",
-+ .part = "MA5671A",
-+ .modes = sfp_quirk_2500basex,
-+ },
- };
-
- static size_t sfp_strlen(const char *str, size_t maxlen)
config MODULES_TREE_LOOKUP
--- a/kernel/module.c
+++ b/kernel/module.c
-@@ -3028,9 +3028,11 @@ static int setup_load_info(struct load_i
+@@ -3030,9 +3030,11 @@ static int setup_load_info(struct load_i
static int check_modinfo(struct module *mod, struct load_info *info, int flags)
{
if (flags & MODULE_INIT_IGNORE_VERMAGIC)
modmagic = NULL;
-@@ -3051,6 +3053,7 @@ static int check_modinfo(struct module *
+@@ -3053,6 +3055,7 @@ static int check_modinfo(struct module *
mod->name);
add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
}
/* Align . to a 8 byte boundary equals to maximum function alignment. */
#define ALIGN_FUNCTION() . = ALIGN(8)
-@@ -372,14 +382,14 @@
+@@ -373,14 +383,14 @@
/* Kernel symbol table: Normal symbols */ \
__ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
__start___ksymtab = .; \
__stop___ksymtab_gpl = .; \
} \
\
-@@ -441,7 +451,7 @@
+@@ -442,7 +452,7 @@
\
/* Kernel symbol table: strings */ \
__ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
} \
\
/* __*init sections */ \
-@@ -841,6 +851,8 @@
+@@ -844,6 +854,8 @@
EXIT_TEXT \
EXIT_DATA \
EXIT_CALL \
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/of.h>
-@@ -3040,3 +3041,5 @@ static int __init regmap_initcall(void)
+@@ -3032,3 +3033,5 @@ static int __init regmap_initcall(void)
return 0;
}
postcore_initcall(regmap_initcall);
bool rev = !skb->_nfct, upd = false;
__be32 ip;
-- if (tc_skb_protocol(skb) != htons(ETH_P_IP))
+- if (skb_protocol(skb, true) != htons(ETH_P_IP))
+ if (cake_skb_proto(skb) != htons(ETH_P_IP))
return false;
u16 *buf, buf_;
u8 dscp;
-- switch (tc_skb_protocol(skb)) {
+- switch (skb_protocol(skb, true)) {
+ switch (cake_skb_proto(skb)) {
case htons(ETH_P_IP):
buf = skb_header_pointer(skb, offset, sizeof(buf_), &buf_);
+++ /dev/null
-From db4603e30effd74d4adb6bcdf73072b2c06fafcd Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 3 Jul 2020 00:07:15 +0200
-Subject: [PATCH] MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
-
-This resolves the hazard between the mtc0 in the change_c0_status() and
-the mfc0 in configure_exception_vector(). Without resolving this hazard
-configure_exception_vector() could read an old value and would restore
-this old value again. This would revert the changes change_c0_status()
-did. I checked this by printing out the read_c0_status() at the end of
-per_cpu_trap_init() and the ST0_MX is not set without this patch.
-
-The hazard is documented in the MIPS Architecture Reference Manual Vol.
-III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
-6.03 table 8.1 which includes:
-
- Producer | Consumer | Hazard
- ----------|----------|----------------------------
- mtc0 | mfc0 | any coprocessor 0 register
-
-I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU.
-There the change_c0_status() function would activate the DSPen by
-setting ST0_MX in the c0_status register. This was reverted and then the
-system got a DSP exception when the DSP registers were saved in
-save_dsp() in the first process switch. The crash looks like this:
-
-[ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
-[ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
-[ 0.107070] Kernel panic - not syncing: Unexpected DSP exception
-[ 0.113470] Rebooting in 1 seconds..
-
-We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs,
-not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with
-kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it
-did not happen.
-
-In the kernel I bisected this problem to commit 9012d011660e ("compiler:
-allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was
-reverted it also happened after commit 172dcd935c34b ("MIPS: Always
-allocate exception vector for MIPSr2+").
-
-Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
-does similar changes to a different file. I am not sure if there are
-more places affected by this problem.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: <stable@vger.kernel.org>
----
- arch/mips/kernel/traps.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -2096,6 +2096,7 @@ static void configure_status(void)
-
- change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
- status_set);
-+ back_to_back_c0_hazard();
- }
-
- unsigned int hwrena;
/*
* The Mellanox Tavor device gives false positive parity errors. Mark this
* device with a broken_parity_status to allow PCI scanning code to "skip"
-@@ -3213,6 +3214,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -3226,6 +3227,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
/*
* Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
* To work around this, query the size it should be configured to by the
-@@ -3238,6 +3241,8 @@ static void quirk_intel_ntb(struct pci_d
+@@ -3251,6 +3254,8 @@ static void quirk_intel_ntb(struct pci_d
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled, even
* though no one is handling them (e.g., if the i915 driver is never
-@@ -3276,6 +3281,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+@@ -3289,6 +3294,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -68,6 +68,7 @@
+@@ -68,6 +68,7 @@ config MACH_ARMADA_38X
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
projects / openwrt / staging / robimarko.git / commitdiff