ar71xx: Add support for Netgear WNR2000v1
authorHuan Truong <htruong@tnhh.net>
Mon, 12 Dec 2016 21:25:01 +0000 (15:25 -0600)
committerJohn Crispin <john@phrozen.org>
Wed, 14 Dec 2016 09:37:01 +0000 (10:37 +0100)
This patch adds supports for the WNR2000v1 board with 4MB flash, and
produces device-specific factory, rootfs, and sysupgrade files for the
WNR2000v1. This board is errorneously claimed as supported on the OpenWRT
wiki as AP81, but AP81 image would not work because of APT81 image
requiring having 8MB of flash, while WNR2000v1 has only 4MB.

The image requires the u-boot bootloader to be modified to fuhry's
bootloader first.

Short specification:

- CPU: Atheros AR9132
- 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps
- 4 MB of Flash
- 32 MB of RAM
- UART header (J1) on board
- 1x button

Factory/Initial flash instructions:

- Set up a TFTP server on your local machine.
- Download the uImage for ar71xx-generic and the rootfs image for
  ar71xx-generic-wnr2000 and save in the tftp server root.
- Gain serial access to the router via the UART port (telnetenable over
  the network only won't work!).
- Upgrade the u-boot bootloader to fuhry's version by running the
  script: http://fuhry.com/b/wnr2000/install-repart.sh
- When the router restarts, interrupt u-boot and gain access to u-boot command line.
- Repartititon the board and flash initial uImage and rootfs as follow.

Commands to type in u-boot:

# tells u-boot that we have a tftp server on 192.168.1.10
setenv serverip 192.168.1.10

# tells u-boot that the router should take the address 192.168.1.1
setenv ipaddr 192.168.1.1

# erase the region from 0x050000-0x3f0000
erase 0xbf050000 +0x3A0000

# loads sqfs.bin on TFTP server, and put it to memory address 0x81000000
tftpboot 0x81000000 sqfs.bin
# it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ
# copy bit by bit 0xZZZZZZ bytes from offset 0x050000
cp.b 0x81000000 0xbf050000 0xZZZZZZ

# same to the uImage.bin, write it right next to sqfs.bin
# again, 0xYYYYYY is the length that tftpboot reports
tftpboot 0x81000000 uImage.bin
cp.b 0x81000000 0xbf2a0000 0xYYYYYY

# We need to tell the kernel what board it is booting into, and where to find the partitions
setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd"

# Tell u-boot where to find the uImage
setenv bootcmd "bootm 0xbf2a0000"

# Tell u-boot to save parameters to the u-boot-env partitions
saveenv

# Reset the board
reset

Tested on:

- WNR2000v1 board.
- Initial flash works.

Known bugs:

- I don't know why factory image doesn't work on initial flash on stock
  firmware in u-boot recovery mode while it should.
- Sysupgrade does not yet work, if you do -f it will mess up your
  installation (requiring a reinstall of sqfs and uImage).

Signed-off-by: Huan Truong <htruong@tnhh.net>
target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c
target/linux/ar71xx/image/legacy-devices.mk
target/linux/ar71xx/image/legacy.mk
target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c

index b4da7ece323bb0070cde755d7a0e8014d0e31be1..6e3becab3a0fee86709d5074f4003dfcdad5dca1 100644 (file)
 #define WNR2000_KEYS_POLL_INTERVAL     20      /* msecs */
 #define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL)
 
-static struct mtd_partition wnr2000_partitions[] = {
-       {
-               .name           = "u-boot",
-               .offset         = 0,
-               .size           = 0x040000,
-               .mask_flags     = MTD_WRITEABLE,
-       }, {
-               .name           = "u-boot-env",
-               .offset         = 0x040000,
-               .size           = 0x010000,
-       }, {
-               .name           = "rootfs",
-               .offset         = 0x050000,
-               .size           = 0x240000,
-       }, {
-               .name           = "user-config",
-               .offset         = 0x290000,
-               .size           = 0x010000,
-       }, {
-               .name           = "uImage",
-               .offset         = 0x2a0000,
-               .size           = 0x120000,
-       }, {
-               .name           = "language_table",
-               .offset         = 0x3c0000,
-               .size           = 0x020000,
-       }, {
-               .name           = "rootfs_checksum",
-               .offset         = 0x3e0000,
-               .size           = 0x010000,
-       }, {
-               .name           = "art",
-               .offset         = 0x3f0000,
-               .size           = 0x010000,
-               .mask_flags     = MTD_WRITEABLE,
-       }
-};
-
-static struct flash_platform_data wnr2000_flash_data = {
-       .parts          = wnr2000_partitions,
-       .nr_parts       = ARRAY_SIZE(wnr2000_partitions),
-};
-
 static struct gpio_led wnr2000_leds_gpio[] __initdata = {
        {
                .name           = "netgear:green:power",
@@ -130,7 +87,7 @@ static void __init wnr2000_setup(void)
        ath79_register_eth(0);
        ath79_register_eth(1);
 
-       ath79_register_m25p80(&wnr2000_flash_data);
+       ath79_register_m25p80(NULL);
 
        ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
                                 wnr2000_leds_gpio);
index 7bf4f937521d46486a4e61ebdd7f72346880e036..3f865da43ff43c236251291699462c069a2ad4d6 100644 (file)
@@ -421,6 +421,11 @@ define LegacyDevice/WPE72_16M
 endef
 LEGACY_DEVICES += WPE72_16M
 
+define LegacyDevice/WNR2000
+  DEVICE_TITLE := NETGEAR WNR2000V1
+endef
+LEGACY_DEVICES += WNR2000
+
 define LegacyDevice/WNR2000V3
   DEVICE_TITLE := NETGEAR WNR2000V3
 endef
index 53e53f04bd5490b0298bca81f0e1a7f5426f8a30..226b66e1df29cc1c8333f423cee48cfcb4b428a0 100644 (file)
@@ -276,6 +276,7 @@ wpj531_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
 wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
 wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware)
 wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
+wnr2000_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
 wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
 wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
 r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
@@ -686,6 +687,10 @@ define Image/Build/Netgear
                                -o $(call imgname,$(1),$(2))-factory$$dashr.img; \
                done; \
        fi
+       if [ "$2" = "wnr2000" ]; then \
+               dd if=$(KDIR)/root.$(1) \
+                       of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
+       fi
 endef
 
 
@@ -970,6 +975,7 @@ $(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000
 
 $(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32))
 $(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
+$(eval $(call SingleProfile,Netgear,64kraw,WNR2000,wnr2000,WNR2000,ttyS0,115200,$$(wnr2000_mtdlayout),0x32303031,WNR2000,"" NA,))
 $(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,))
 $(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",))
 $(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
index 26cb66ac7f03b11c9bbfd5dd61e9a373053d789e..41a1b3746d6c94c9fe3b34a23269b37f6cfb0d03 100644 (file)
@@ -246,6 +246,7 @@ static struct mtd_part_parser uimage_generic_parser = {
        .type = MTD_PARSER_TYPE_FIRMWARE,
 };
 
+#define FW_MAGIC_WNR2000V1     0x32303031
 #define FW_MAGIC_WNR2000V3     0x32303033
 #define FW_MAGIC_WNR2000V4     0x32303034
 #define FW_MAGIC_WNR2200       0x32323030
@@ -265,6 +266,7 @@ static ssize_t uimage_verify_wndr3700(u_char *buf, size_t len)
        case FW_MAGIC_WNR612V2:
        case FW_MAGIC_WNR1000V2:
        case FW_MAGIC_WNR1000V2_VC:
+       case FW_MAGIC_WNR2000V1:
        case FW_MAGIC_WNR2000V3:
        case FW_MAGIC_WNR2200:
        case FW_MAGIC_WNDR3700: