+++ /dev/null
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_8139TOO is not set
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-CONFIG_AR71XX_MACH_AP81=y
-CONFIG_AR71XX_MACH_AP83=y
-CONFIG_AR71XX_MACH_AW_NR580=y
-CONFIG_AR71XX_MACH_DIR_825_B1=y
-CONFIG_AR71XX_MACH_GENERIC=y
-CONFIG_AR71XX_MACH_MZK_W04NU=y
-CONFIG_AR71XX_MACH_MZK_W300NH=y
-CONFIG_AR71XX_MACH_PB42=y
-CONFIG_AR71XX_MACH_PB44=y
-CONFIG_AR71XX_MACH_RB_4XX=y
-CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_WR1043ND=y
-CONFIG_AR71XX_MACH_TL_WR741ND=y
-CONFIG_AR71XX_MACH_TL_WR941ND=y
-CONFIG_AR71XX_MACH_UBNT=y
-CONFIG_AR71XX_MACH_WNDR3700=y
-CONFIG_AR71XX_MACH_WNR2000=y
-CONFIG_AR71XX_MACH_WP543=y
-CONFIG_AR71XX_MACH_WRT160NL=y
-CONFIG_AR71XX_MACH_WRT400N=y
-CONFIG_AR71XX_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR71XX=y
-# CONFIG_BCM47XX is not set
-CONFIG_BITREVERSE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLASSIC_RCU=y
-CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_IDE is not set
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IRQ_CPU=y
-# CONFIG_ISDN is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MICREL_PHY=y
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR91XX_FLASH=y
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_RB4XX=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_WRT160NL_PARTS=y
-CONFIG_MYLOADER=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6060=y
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-CONFIG_NET_DSA_TAG_TRAILER=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-# CONFIG_R6040 is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SPI=y
-CONFIG_SPI_AP83=y
-CONFIG_SPI_AR71XX=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_PB44=y
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_VSC7385 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_YAFFS_9BYTE_TAGS=y
-CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -593,6 +593,13 @@ core-$(CONFIG_TOSHIBA_RBTX4927) += arch/
- core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
- core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/
-
-+#
-+# Atheros AR71xx
-+#
-+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
-+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx
-+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
-+
- # temporary until string.h is fixed
- cflags-y += -ffreestanding
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -22,6 +22,23 @@ choice
- config MACH_ALCHEMY
- bool "Alchemy processor based machines"
-
-+config ATHEROS_AR71XX
-+ bool "Atheros AR71xx based boards"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select ARCH_REQUIRE_GPIOLIB
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_CPU_MIPS32_R2
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_HAS_EARLY_PRINTK
-+ select MIPS_MACHINE
-+ help
-+ Support for Atheros AR71xx based boards.
-+
- config BASLER_EXCITE
- bool "Basler eXcite smart camera"
- select CEVT_R4K
-@@ -598,6 +615,7 @@ config WR_PPMC
- endchoice
-
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar71xx/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/emma/Kconfig"
- source "arch/mips/jazz/Kconfig"
+++ /dev/null
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o
- obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
- obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
- obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
-+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
+++ /dev/null
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -81,6 +81,13 @@ config USB_EHCI_BIG_ENDIAN_DESC
- depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
- default y
-
-+config USB_EHCI_AR71XX
-+ bool "USB EHCI support for AR71xx"
-+ depends on USB_EHCI_HCD && ATHEROS_AR71XX
-+ default y
-+ help
-+ Support for Atheros AR71xx built-in EHCI controller
-+
- config USB_EHCI_FSL
- bool "Support for Freescale on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && FSL_SOC
-@@ -140,6 +147,13 @@ config USB_OHCI_HCD
- To compile this driver as a module, choose M here: the
- module will be called ohci-hcd.
-
-+config USB_OHCI_AR71XX
-+ bool "USB OHCI support for Atheros AR71xx"
-+ depends on USB_OHCI_HCD && ATHEROS_AR71XX
-+ default y
-+ help
-+ Support for Atheros AR71xx built-in OHCI controller
-+
- config USB_OHCI_HCD_PPC_SOC
- bool "OHCI support for on-chip PPC USB controller"
- depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1036,6 +1036,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ixp4xx_ehci_driver
- #endif
-
-+#ifdef CONFIG_USB_EHCI_AR71XX
-+#include "ehci-ar71xx.c"
-+#define PLATFORM_DRIVER ehci_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
- #error "missing bus glue for ehci-hcd"
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1080,6 +1080,11 @@ MODULE_LICENSE ("GPL");
- #define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver
- #endif
-
-+#ifdef CONFIG_USB_OHCI_AR71XX
-+#include "ohci-ar71xx.c"
-+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OF_PLATFORM_DRIVER) && \
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,13 @@ if SPI_MASTER
-
- comment "SPI Master Controller Drivers"
-
-+config SPI_AR71XX
-+ tristate "Atheros AR71xx SPI Controller"
-+ depends on SPI_MASTER && ATHEROS_AR71XX
-+ select SPI_BITBANG
-+ help
-+ This is the SPI contoller driver for Atheros AR71xx.
-+
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER) += spi.o
-
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
- obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
- obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
+++ /dev/null
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2039,6 +2039,8 @@ config ACENIC_OMIT_TIGON_I
-
- The safe and default value for this is N.
-
-+source drivers/net/ag71xx/Kconfig
-+
- config DL2K
- tristate "DL2000/TC902x-based Gigabit Ethernet support"
- depends on PCI
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -93,6 +93,7 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
- obj-$(CONFIG_MII) += mii.o
- obj-$(CONFIG_PHYLIB) += phy/
-
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_SUNDANCE) += sundance.o
- obj-$(CONFIG_HAMACHI) += hamachi.o
- obj-$(CONFIG_NET) += Space.o loopback.o
+++ /dev/null
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -747,6 +747,13 @@ config TXX9_WDT
- help
- Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-
-+config AR71XX_WDT
-+ tristate "Atheros AR71xx Watchdog Timer"
-+ depends on ATHEROS_AR71XX
-+ help
-+ Hardware driver for the built-in watchdog timer on the Atheros
-+ AR71xx SoCs.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
-
- # PARISC Architecture
-
+++ /dev/null
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -257,6 +257,13 @@ config MTD_ALCHEMY
- help
- Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
-
-+config MTD_AR91XX_FLASH
-+ tristate "Atheros AR91xx parallel flash support"
-+ depends on ATHEROS_AR71XX
-+ select MTD_COMPLEX_MAPPINGS
-+ help
-+ Parallel flash driver for the Atheros AR91xx based boards.
-+
- config MTD_DILNETPC
- tristate "CFI Flash device mapped on DIL/Net PC"
- depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI) += pci.o
- obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
-+obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o
- obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312) += edb7312.o
- obj-$(CONFIG_MTD_IMPA7) += impa7.o
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -503,6 +503,10 @@ static struct flash_info __devinitdata m
- { "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
- { "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
-
-+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
-+ { "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
-+ { "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
-+
- /* Spansion -- single (large) sector size only, at least
- * for the chips listed here (without boot sectors).
- */
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -85,6 +85,11 @@ config RTL8306_PHY
- tristate "Driver for Realtek RTL8306S switches"
- select SWCONFIG
-
-+config MICREL_PHY
-+ tristate "Drivers for Micrel/Kendin PHYs"
-+ ---help---
-+ Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
- obj-$(CONFIG_IP175C_PHY) += ip175c.o
- obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
-+obj-$(CONFIG_MICREL_PHY) += micrel.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
- obj-$(CONFIG_MDIO_OF_GPIO) += mdio-ofgpio.o
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -711,12 +711,17 @@ static int __devinit m25p_probe(struct s
- struct mtd_partition *parts = NULL;
- int nr_parts = 0;
-
-+ static const char *part_probes[] = {
- #ifdef CONFIG_MTD_CMDLINE_PARTS
-- static const char *part_probes[] = { "cmdlinepart", NULL, };
-+ "cmdlinepart",
-+#endif
-+#ifdef CONFIG_MTD_MYLOADER_PARTS
-+ "MyLoader",
-+#endif
-+ NULL, };
-
- nr_parts = parse_mtd_partitions(&flash->mtd,
- part_probes, &parts, 0);
--#endif
-
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -503,6 +503,10 @@ static struct flash_info __devinitdata m
- { "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
- { "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
-
-+ /* EON -- en25pxx */
-+ { "en25p32", 0x1c2016, 0, 64 * 1024, 64, },
-+ { "en25p64", 0x1c2017, 0, 64 * 1024, 128, },
-+
- /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
- { "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
- { "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -722,6 +722,9 @@ static int __devinit m25p_probe(struct s
- #ifdef CONFIG_MTD_MYLOADER_PARTS
- "MyLoader",
- #endif
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+ "RedBoot",
-+#endif
- NULL, };
-
- nr_parts = parse_mtd_partitions(&flash->mtd,
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -507,6 +507,11 @@ static struct flash_info __devinitdata m
- { "en25p32", 0x1c2016, 0, 64 * 1024, 64, },
- { "en25p64", 0x1c2017, 0, 64 * 1024, 128, },
-
-+ /* Macronix -- mx25lxxx */
-+ { "mx25l32", 0xc22016, 0, 64 * 1024, 64, },
-+ { "mx25l64", 0xc22017, 0, 64 * 1024, 128, },
-+ { "mx25l128", 0xc22018, 0, 64 * 1024, 256, },
-+
- /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
- { "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
- { "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -512,6 +512,11 @@ static struct flash_info __devinitdata m
- { "mx25l64", 0xc22017, 0, 64 * 1024, 128, },
- { "mx25l128", 0xc22018, 0, 64 * 1024, 256, },
-
-+ /* Numonyx -- xxxs33b */
-+ { "160s33b", 0x898911, 0, 64 * 1024, 64, },
-+ { "320s33b", 0x898912, 0, 64 * 1024, 128, },
-+ { "640s33b", 0x898913, 0, 64 * 1024, 256, },
-+
- /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
- { "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
- { "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
+++ /dev/null
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -159,6 +159,7 @@
- #define SST39LF800 0x2781
- #define SST39LF160 0x2782
- #define SST39VF1601 0x234b
-+#define SST39VF6401B 0x236d
- #define SST39LF512 0x00D4
- #define SST39LF010 0x00D5
- #define SST39LF020 0x00D6
-@@ -1502,6 +1503,18 @@ static const struct amd_flash_info jedec
- ERASEINFO(0x10000,64),
- }
- }, {
-+ .mfr_id = MANUFACTURER_SST,
-+ .dev_id = SST39VF6401B,
-+ .name = "SST 39VF6401B",
-+ .devtypes = CFI_DEVICETYPE_X16,
-+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
-+ .dev_size = SIZE_8MiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x10000,128)
-+ }
-+ }, {
- .mfr_id = MANUFACTURER_ST,
- .dev_id = M29F800AB,
- .name = "ST M29F800AB",
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1558,7 +1558,7 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-+ if (chip_good(map, adr, map_word_ff(map)))
- break;
-
- if (time_after(jiffies, timeo)) {
-@@ -1646,7 +1646,7 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
- break;
- }
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -735,6 +735,9 @@ static int __devinit m25p_probe(struct s
- #ifdef CONFIG_MTD_REDBOOT_PARTS
- "RedBoot",
- #endif
-+#ifdef CONFIG_MTD_WRT160NL_PARTS
-+ "wrt160nl",
-+#endif
- NULL, };
-
- nr_parts = parse_mtd_partitions(&flash->mtd,
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -172,6 +172,12 @@ config MTD_AR7_PARTS
- ---help---
- TI AR7 partitioning support
-
-+config MTD_WRT160NL_PARTS
-+ tristate "Linksys WRT160NL partitioning support"
-+ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
-+ ---help---
-+ Linksys WRT160NL partitioning support
-+
- config MTD_MYLOADER_PARTS
- tristate "MyLoader partition parsing"
- depends on MTD_PARTITIONS && (ADM5120 || ATHEROS || ATHEROS_AR71XX)
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
-+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-
+++ /dev/null
---- a/drivers/usb/host/ehci-q.c
-+++ b/drivers/usb/host/ehci-q.c
-@@ -1082,6 +1082,9 @@ static void end_unlink_async (struct ehc
- ehci->reclaim = NULL;
- start_unlink_async (ehci, next);
- }
-+
-+ if (ehci->has_synopsys_hc_bug)
-+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
- }
-
- /* makes sure the async qh will become idle */
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -124,6 +124,7 @@ struct ehci_hcd { /* one per controlle
- unsigned has_fsl_port_bug:1; /* FreeScale */
- unsigned big_endian_mmio:1;
- unsigned big_endian_desc:1;
-+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
-
- u8 sbrn; /* packed release number */
-
+++ /dev/null
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
- }
- } else {
- offset = directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- offset += master->erasesize;
- if (offset == master->size)
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
--
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-
-@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -420,4 +420,8 @@ config MTD_NAND_SH_FLCTL
- Several Renesas SuperH CPU has FLCTL. This option enables support
- for NAND Flash using FLCTL. This driver support SH7723.
-
-+config MTD_NAND_RB4XX
-+ tristate "NAND flash driver for RouterBoard 4xx series"
-+ depends on MTD_NAND && ATHEROS_AR71XX
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) +=
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
+++ /dev/null
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER) += spi.o
-
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AP83) += ap83_spi.o
- obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
- obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,14 @@ if SPI_MASTER
-
- comment "SPI Master Controller Drivers"
-
-+config SPI_AP83
-+ tristate "Atheros AP83 specific SPI Controller"
-+ depends on SPI_MASTER && AR71XX_MACH_AP83
-+ select SPI_BITBANG
-+ help
-+ This is a specific SPI controller driver for the Atheros AP83
-+ reference board.
-+
- config SPI_AR71XX
- tristate "Atheros AR71xx SPI Controller"
- depends on SPI_MASTER && ATHEROS_AR71XX
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -283,6 +283,11 @@ config SPI_TLE62X0
- sysfs interface, with each line presented as a kind of GPIO
- exposing both switch control and diagnostic feedback.
-
-+config SPI_VSC7385
-+ tristate "Vitesse VSC7385 ethernet switch driver"
-+ help
-+ SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -38,6 +38,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.
- # SPI protocol drivers (device/link on bus)
- obj-$(CONFIG_SPI_AT25) += at25.o
- obj-$(CONFIG_SPI_SPIDEV) += spidev.o
-+obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o
- obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
- # ... add above this line ...
-
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -68,6 +68,14 @@ config SPI_AR71XX
- help
- This is the SPI contoller driver for Atheros AR71xx.
-
-+config SPI_PB44
-+ tristate "Atheros PB44 board specific SPI controller"
-+ depends on SPI_MASTER && AR71XX_MACH_PB44
-+ select SPI_BITBANG
-+ help
-+ This is a specific SPI controller driver for the Atheros PB44
-+ reference board.
-+
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
- obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
- obj-$(CONFIG_SPI_IMX) += spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
-+obj-$(CONFIG_SPI_PB44) += pb44_spi.o
- obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
- obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -114,4 +114,8 @@ config MDIO_OF_GPIO
- ---help---
- Supports GPIO lib-based MDIO busses.
-
-+config RTL8366_SMI
-+ tristate "Support for RTL8366 switch via SMI interface"
-+ depends on GENERIC_GPIO
-+
- endif # PHYLIB
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
- obj-$(CONFIG_IP175C_PHY) += ip175c.o
- obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
-+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
- obj-$(CONFIG_MICREL_PHY) += micrel.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+++ /dev/null
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -167,6 +167,7 @@ endif
- #
- libs-$(CONFIG_ARC) += arch/mips/fw/arc/
- libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
- libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
- libs-y += arch/mips/fw/lib/
- libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -789,6 +789,9 @@ config MIPS_NILE4
- config MIPS_DISABLE_OBSOLETE_IDE
- bool
-
-+config MYLOADER
-+ bool
-+
- config SYNC_R4K
- bool
-
+++ /dev/null
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -47,6 +47,7 @@
- #include <asm/mmu_context.h>
- #include <asm/types.h>
- #include <asm/stacktrace.h>
-+#include <asm/time.h>
-
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1514,6 +1515,8 @@ void __cpuinit per_cpu_trap_init(void)
- */
- if (cpu_has_mips_r2) {
- cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+ if (get_c0_compare_irq)
-+ cp0_compare_irq = get_c0_compare_irq();
- cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
- #ifdef CONFIG_CEVT_R4K
- extern int mips_clockevent_init(void);
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- #else
- static inline int mips_clockevent_init(void)
- {
+++ /dev/null
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -15,6 +15,22 @@
- #include <asm/cevt-r4k.h>
-
- /*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register. 4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+ do { \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ } while (0)
-+
-+/*
- * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
- * of these routines with SMTC-specific variants.
- */
-@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
- cnt = read_c0_count();
- cnt += delta;
- write_c0_compare(cnt);
-+ compare_change_hazard();
- res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
- return res;
- }
-@@ -99,22 +116,6 @@ static int c0_compare_int_pending(void)
- return (read_c0_cause() >> cp0_compare_irq) & 0x100;
- }
-
--/*
-- * Compare interrupt can be routed and latched outside the core,
-- * so a single execution hazard barrier may not be enough to give
-- * it time to clear as seen in the Cause register. 4 time the
-- * pipeline depth seems reasonably conservative, and empirically
-- * works better in configurations with high CPU/bus clock ratios.
-- */
--
--#define compare_change_hazard() \
-- do { \
-- irq_disable_hazard(); \
-- irq_disable_hazard(); \
-- irq_disable_hazard(); \
-- irq_disable_hazard(); \
-- } while (0)
--
- int c0_compare_int_usable(void)
- {
- unsigned int delta;
projects / openwrt / staging / lynxis.git / commitdiff