Previously both lan1 and lan2 leds were wrongly labelled as lan2.
Moreover they were connected to the wrong lan port.
Fixes
8fde82095ba0 ("ramips: add support for Wavlink WL-WN535K1")
Reported-by: Nicolò Maria Semprini <nicosemp@gmail.com>
Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
(cherry picked from commit
c71dada92654a53c63bbc5bebcc40fe924750ed7)
lan1 {
label = "green:lan1";
- gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "green:lan2";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
};
wan {
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
;;
wavlink,wl-wn535k1)
- ucidef_set_led_switch "lan1" "lan2" "green:lan1" "switch0" "0x04"
- ucidef_set_led_switch "lan2" "lan2" "green:lan2" "switch0" "0x20"
+ ucidef_set_led_switch "lan1" "lan1" "green:lan1" "switch0" "0x20"
+ ucidef_set_led_switch "lan2" "lan2" "green:lan2" "switch0" "0x04"
ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x10"
;;
wavlink,wl-wn579x3)
;;
wavlink,wl-wn535k1)
ucidef_add_switch "switch0" \
- "2:lan" "5:lan" "4:wan" "6@eth0"
+ "2:lan:2" "5:lan:1" "4:wan" "6@eth0"
;;
wavlink,wl-wn579x3)
ucidef_add_switch "switch0" \