mediatek: mt7622: simplify 02_network

Most mt7622 devices use the mt7531 switch, which have been
switched to dsa driver for a long time. So use dsa as the
default configuration and configure these rtl8367s devices
separately. This reduces the amount of code.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

diff --git a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network
index 6c43e4622243a3c43b47dae232ce28cb3ccff3b2..6bda6e11f37360a1636c0e7ef9ab2f11f0df8846 100644 (file)
--- a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network
@@ -8,19 +8,6 @@ mediatek_setup_interfaces()
        local board="$1"
 
        case $board in
-       bananapi,bpi-r64|\
-       buffalo,wsr-3200ax4s|\
-       dlink,eagle-pro-ai-r32-a1|\
-       elecom,wrc-x3200gst3|\
-       linksys,e8450|\
-       linksys,e8450-ubi|\
-       mediatek,mt7622-rfb1|\
-       mediatek,mt7622-rfb1-ubi|\
-       netgear,wax206|\
-       reyee,ax3200-e5|\
-       ruijie,rg-ew3200gx-pro)
-               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
-               ;;
        buffalo,wsr-2533dhp2)
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
@@ -28,6 +15,11 @@ mediatek_setup_interfaces()
        dlink,eagle-pro-ai-m32-a1)
                ucidef_set_interfaces_lan_wan "lan1 lan2" wan
                ;;
+       elecom,wrc-2533gent|\
+       totolink,a8000ru)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6u@eth0" "5u@eth1"
+               ;;
        ubnt,unifi-6-lr*)
                ucidef_set_interface_lan "eth0"
                ;;
@@ -35,8 +27,7 @@ mediatek_setup_interfaces()
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
                ;;
        *)
-               ucidef_add_switch "switch0" \
-                                 "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6u@eth0" "5u@eth1"
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
                ;;
        esac
 }