ramips: rt305x: add initial support for Tenda W306R V2.0

More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 95f608a4f51e48f25c1ecfa0a251725d705ac9ac..2d351d61c2e82b7ec74cc9fedb33a1142f502d11 100755 (executable)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -81,6 +81,9 @@ get_status_led() {
        v22rw-2x2)
                status_led="v22rw-2x2:green:security"
                ;;
+       w306r-v20)
+               status_led="w306r:green:sys"
+               ;;
        w502u)
                status_led="alfa:blue:wps"
                ;;

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 62788cde48d7cdc60941e5f6b61f2bbb3b5f19c7..34821ec8732ff81b25e86ffb6310635e32eb44d5 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -65,6 +65,7 @@ case "$FIRMWARE" in
        sl-r7205 | \
        v11st-fe | \
        v22rw-2x2 | \
+       w306r-v20 | \
        w502u | \
        wcr-150gn | \
        whr-g300n | \

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds
index d8f3c0cba682816f9b1d0cc198f029e93869ab59..ba6ea60cdee65fe7b99fa7058f73c9191b6c093c 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/leds
@@ -66,6 +66,9 @@ case $board in
        v11st-fe)
                set_wifi_led "rt2800pci-phy0::radio"
                ;;
+       w306r-v20)
+               set_wifi_led "rt2800pci-phy0::radio"
+               ;;
        w502u)
                set_usb_led "alfa:blue:usb"
                set_wifi_led "rt2800pci-phy0::radio"

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index dc2221f1e70a66e743ca022a0594f56cfa14fdf9..81c12de27e7e5b56ae256bbf156b53f845757ce0 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -55,6 +55,7 @@ ramips_setup_interfaces()
                ;;
 
        freestation5 | \
+       w306r-v20 | \
        wcr-150gn)
                ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
                ;;
@@ -96,6 +97,11 @@ ramips_setup_macs()
                wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
                ;;
 
+       w306r-v20)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5)
+               ;;
+
        dir-300-b1 |\
        dir-300-b2 |\
        dir-600-b1)

diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index f523d690d47418f9b63fa6900e423bc8b5640e60..bd5de41a92d46a8240f71987ac1c3818bd971d29 100644 (file)
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -28,6 +28,7 @@ preinit_set_mac_address() {
        hw550-3g |\
        nbg-419n |\
        omni-emb |\
+       w306r-v20 |\
        w502u    |\
        wl-330n |\
        wr6202 |\

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 1298ebda932806b49faaa838696b2487df4c9f9d..045d952868a26cff2f9d12d10d4a1bee71a48739 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -134,6 +134,9 @@ ramips_board_name() {
        *"Sitecom WL-351 v1 002")
                name="wl-351"
                ;;
+       *"Tenda W306R V2.0")
+               name="w306r-v20"
+               ;;
        *"Ralink V11ST-FE")
                name="v11st-fe"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 7f500d9796fdc2a5567b3397ad2ea358caf46ab4..faa82ece0ac2e7efce3e831e05e44eb5f2507164 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -32,6 +32,7 @@ platform_check_image() {
        rt-n15 | \
        rt-n56u | \
        sl-r7205 | \
+       w306r-v20 |\
        w502u |\
        wr6202 |\
        v22rw-2x2 | \

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index c2ec146c9773f7aacbb66b7e93679ebe8f6c8427..08b04f9af49daa7bc160f8ac467d9c4e4508c2da 100644 (file)
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -45,6 +45,7 @@ enum ramips_mach_type {
        RAMIPS_MACH_PWH2004,            /* Prolink 2004H / Abocom 5205 */
        RAMIPS_MACH_SL_R7205,           /* Skylink SL-R7205 Wireless 3G Router*/
        RAMIPS_MACH_V22RW_2X2,          /* Ralink AP-RT3052-V22RW-2X2 */
+       RAMIPS_MACH_W306R_V20,          /* Tenda W306R_V20 */
        RAMIPS_MACH_W502U,              /* ALFA Networks W502U */
        RAMIPS_MACH_WCR150GN,           /* Sparklan WCR-150GN */
        RAMIPS_MACH_WHR_G300N,          /* Buffalo WHR-G300N */

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index ef4ddf40978ac20fe19a883539aa6c7e75a25503..b9850a651ff7ff611418866eb238b25f8ba8a892 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -104,6 +104,11 @@ config RT305X_MACH_V22RW_2X2
        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
+config RT305X_MACH_W306R_V20
+       bool "Tenda W306R V2.0 board support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_WL341V3
        bool "Sitecom WL-341 v3 board support"
        select RALINK_DEV_GPIO_BUTTONS

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 03369365056fd2ad321f5ecb8e5b1258dfdc409f..f5c6aa8dfecd24f65f2d422c17b61f03e4f4c3a2 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
 obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS)  += mach-rt-n10-plus.o
 obj-$(CONFIG_RT305X_MACH_SL_R7205)     += mach-sl-r7205.o
 obj-$(CONFIG_RT305X_MACH_V22RW_2X2)    += mach-v22rw-2x2.o
+obj-$(CONFIG_RT305X_MACH_W306R_V20)    += mach-w306r-v20.o
 obj-$(CONFIG_RT305X_MACH_W502U)                += mach-w502u.o
 obj-$(CONFIG_RT305X_MACH_WCR150GN)     += mach-wcr150gn.o
 obj-$(CONFIG_RT305X_MACH_WHR_G300N)    += mach-whr-g300n.o

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c
new file mode 100644 (file)
index 0000000..6235a73
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c
@@ -0,0 +1,72 @@
+/*
+ *  Tenda W306R V2.0 board support
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+#include <asm/mach-ralink/ramips_eth_platform.h>
+
+#include "devices.h"
+
+#define W306R_V20_GPIO_LED_SYS         9 /* FIXME */
+#define W306R_V20_GPIO_LED_WPS         13
+
+#define W306R_V20_GPIO_BUTTON_RESET    10
+
+#define W306R_V20_KEYS_POLL_INTERVAL   20
+#define W306R_V20_KEYS_DEBOUNCE_INTERVAL (3 * W306R_V20_KEYS_POLL_INTERVAL)
+
+static struct gpio_led w306r_v20_leds_gpio[] __initdata = {
+       {
+               .name           = "w306r-v20:green:sys",
+               .gpio           = W306R_V20_GPIO_LED_SYS,
+               .active_low     = 1,
+       }, {
+               .name           = "w306r-v20:green:wps",
+               .gpio           = W306R_V20_GPIO_LED_WPS,
+               .active_low     = 1,
+       }
+};
+
+static struct gpio_keys_button w306r_v20_gpio_buttons[] __initdata = {
+       {
+               .desc           = "RESET/WPS",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = W306R_V20_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = W306R_V20_GPIO_BUTTON_RESET,
+               .active_low     = 1,
+       }
+};
+
+static void __init w306r_v20_init(void)
+{
+       rt305x_register_flash(0);
+
+       rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
+       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
+       rt305x_register_ethernet();
+       ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio),
+                                 w306r_v20_leds_gpio);
+       ramips_register_gpio_buttons(-1, W306R_V20_KEYS_POLL_INTERVAL,
+                                    ARRAY_SIZE(w306r_v20_gpio_buttons),
+                                    w306r_v20_gpio_buttons);
+       rt305x_register_wifi();
+       rt305x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_W306R_V20, "W306R_V20", "Tenda W306R V2.0",
+            w306r_v20_init);

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 0c37f7e3524ede66dc0ef5b79698e12f9b1df9cf..aac9ad2ea377ff98d566f24da37329445da0ebf9 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -371,6 +371,10 @@ define Image/Build/Profile/V22RW2X2
        $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys)
 endef
 
+define Image/Build/Profile/W306R_V20
+       $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
+endef
+
 define Image/Build/Profile/W502U
        $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys)
 endef
@@ -428,6 +432,7 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/RTG32B1,$(1))
        $(call Image/Build/Profile/SLR7205,$(1))
        $(call Image/Build/Profile/V22RW2X2,$(1))
+       $(call Image/Build/Profile/W306R_V20,$(1))
        $(call Image/Build/Profile/W502U,$(1))
        $(call Image/Build/Profile/WCR150GN,$(1))
        $(call Image/Build/Profile/WHRG300N,$(1))

diff --git a/target/linux/ramips/rt305x/config-3.2 b/target/linux/ramips/rt305x/config-3.2
index c81463853981cc062a677ea8b40d83ce33ad0f60..5f3a214a9223daa987c9222266758a8467f0c075 100644 (file)
--- a/target/linux/ramips/rt305x/config-3.2
+++ b/target/linux/ramips/rt305x/config-3.2
@@ -111,6 +111,7 @@ CONFIG_RT305X_MACH_RT_G32_REVB=y
 CONFIG_RT305X_MACH_RT_N10_PLUS=y
 CONFIG_RT305X_MACH_SL_R7205=y
 CONFIG_RT305X_MACH_V22RW_2X2=y
+CONFIG_RT305X_MACH_W306R_V20=y
 CONFIG_RT305X_MACH_W502U=y
 CONFIG_RT305X_MACH_WCR150GN=y
 CONFIG_RT305X_MACH_WHR_G300N=y

diff --git a/target/linux/ramips/rt305x/profiles/tenda.mk b/target/linux/ramips/rt305x/profiles/tenda.mk
new file mode 100644 (file)
index 0000000..5e45b5f
--- /dev/null
+++ b/target/linux/ramips/rt305x/profiles/tenda.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/W306R_V20
+       NAME:=Tenda W306R V2.0
+       PACKAGES:=
+endef
+
+define Profile/W306R_V20/Description
+       Package set for Tenda W306R V2.0 board
+endef
+
+$(eval $(call Profile,W306R_V20))