sfc: Remove unused code for non-autoneg speed/duplex switching

The only multi-speed PHY driver using this is 10Xpress, and it does
not support non-autoneg operation.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 25fb20adf4b7c6cf58d7e44e409649d5c986640a..231e580acc9a398495a7ada269d3a2cf4e94746d 100644 (file)
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -248,7 +248,7 @@ void efx_mdio_set_mmds_lpower(struct efx_nic *efx,
 int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
        struct ethtool_cmd prev;
-       u32 required;
+       bool xnp;
        int reg;
 
        efx->phy_op->get_settings(efx, &prev);
@@ -265,76 +265,46 @@ int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
                return -EINVAL;
 
        /* Check that PHY supports these settings */
-       if (ecmd->autoneg) {
-               required = SUPPORTED_Autoneg;
-       } else if (ecmd->duplex) {
-               switch (ecmd->speed) {
-               case SPEED_10:  required = SUPPORTED_10baseT_Full;  break;
-               case SPEED_100: required = SUPPORTED_100baseT_Full; break;
-               default:        return -EINVAL;
-               }
-       } else {
-               switch (ecmd->speed) {
-               case SPEED_10:  required = SUPPORTED_10baseT_Half;  break;
-               case SPEED_100: required = SUPPORTED_100baseT_Half; break;
-               default:        return -EINVAL;
-               }
-       }
-       required |= ecmd->advertising;
-       if (required & ~prev.supported)
+       if (!ecmd->autoneg ||
+           (ecmd->advertising | SUPPORTED_Autoneg) & ~prev.supported)
                return -EINVAL;
 
-       if (ecmd->autoneg) {
-               bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full
-                           || EFX_WORKAROUND_13204(efx));
-
-               /* Set up the base page */
-               reg = ADVERTISE_CSMA;
-               if (ecmd->advertising & ADVERTISED_10baseT_Half)
-                       reg |= ADVERTISE_10HALF;
-               if (ecmd->advertising & ADVERTISED_10baseT_Full)
-                       reg |= ADVERTISE_10FULL;
-               if (ecmd->advertising & ADVERTISED_100baseT_Half)
-                       reg |= ADVERTISE_100HALF;
-               if (ecmd->advertising & ADVERTISED_100baseT_Full)
-                       reg |= ADVERTISE_100FULL;
-               if (xnp)
-                       reg |= ADVERTISE_RESV;
-               else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
-                                             ADVERTISED_1000baseT_Full))
-                       reg |= ADVERTISE_NPAGE;
-               reg |= mii_advertise_flowctrl(efx->wanted_fc);
-               efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
-
-               /* Set up the (extended) next page if necessary */
-               if (efx->phy_op->set_npage_adv)
-                       efx->phy_op->set_npage_adv(efx, ecmd->advertising);
-
-               /* Enable and restart AN */
-               reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_CTRL1);
-               reg |= MDIO_AN_CTRL1_ENABLE;
-               if (!(EFX_WORKAROUND_15195(efx) &&
-                     LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
-                       reg |= MDIO_AN_CTRL1_RESTART;
-               if (xnp)
-                       reg |= MDIO_AN_CTRL1_XNP;
-               else
-                       reg &= ~MDIO_AN_CTRL1_XNP;
-               efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
-       } else {
-               /* Disable AN */
-               efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_CTRL1,
-                                 MDIO_AN_CTRL1_ENABLE, false);
-
-               /* Set the basic control bits */
-               reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1);
-               reg &= ~(MDIO_CTRL1_SPEEDSEL | MDIO_CTRL1_FULLDPLX);
-               if (ecmd->speed == SPEED_100)
-                       reg |= MDIO_PMA_CTRL1_SPEED100;
-               if (ecmd->duplex)
-                       reg |= MDIO_CTRL1_FULLDPLX;
-               efx_mdio_write(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, reg);
-       }
+       xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full
+              || EFX_WORKAROUND_13204(efx));
+
+       /* Set up the base page */
+       reg = ADVERTISE_CSMA;
+       if (ecmd->advertising & ADVERTISED_10baseT_Half)
+               reg |= ADVERTISE_10HALF;
+       if (ecmd->advertising & ADVERTISED_10baseT_Full)
+               reg |= ADVERTISE_10FULL;
+       if (ecmd->advertising & ADVERTISED_100baseT_Half)
+               reg |= ADVERTISE_100HALF;
+       if (ecmd->advertising & ADVERTISED_100baseT_Full)
+               reg |= ADVERTISE_100FULL;
+       if (xnp)
+               reg |= ADVERTISE_RESV;
+       else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
+                                     ADVERTISED_1000baseT_Full))
+               reg |= ADVERTISE_NPAGE;
+       reg |= mii_advertise_flowctrl(efx->wanted_fc);
+       efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
+
+       /* Set up the (extended) next page if necessary */
+       if (efx->phy_op->set_npage_adv)
+               efx->phy_op->set_npage_adv(efx, ecmd->advertising);
+
+       /* Enable and restart AN */
+       reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_CTRL1);
+       reg |= MDIO_AN_CTRL1_ENABLE;
+       if (!(EFX_WORKAROUND_15195(efx) &&
+             LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
+               reg |= MDIO_AN_CTRL1_RESTART;
+       if (xnp)
+               reg |= MDIO_AN_CTRL1_XNP;
+       else
+               reg &= ~MDIO_AN_CTRL1_XNP;
+       efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
 
        return 0;
 }