staging: vme: Add missing CR in printk messages in vme_pio2_core.c

This patch add missing CR in messages within vme_pio2_core.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c
index fd19c257f53320a779d0ec3713c89c342b713cae..84c5a07e8f6a70b215664b2541c99bf66c0066c7 100644 (file)
--- a/drivers/staging/vme/devices/vme_pio2_core.c
+++ b/drivers/staging/vme/devices/vme_pio2_core.c
@@ -182,30 +182,30 @@ static int pio2_match(struct vme_dev *vdev)
 
        if (vdev->num >= bus_num) {
                dev_err(&vdev->dev,
-                       "The enumeration of the VMEbus to which the board is connected must be specified");
+                       "The enumeration of the VMEbus to which the board is connected must be specified\n");
                return 0;
        }
 
        if (vdev->num >= base_num) {
                dev_err(&vdev->dev,
-                       "The VME address for the cards registers must be specified");
+                       "The VME address for the cards registers must be specified\n");
                return 0;
        }
 
        if (vdev->num >= vector_num) {
                dev_err(&vdev->dev,
-                       "The IRQ vector used by the card must be specified");
+                       "The IRQ vector used by the card must be specified\n");
                return 0;
        }
 
        if (vdev->num >= level_num) {
                dev_err(&vdev->dev,
-                       "The IRQ level used by the card must be specified");
+                       "The IRQ level used by the card must be specified\n");
                return 0;
        }
 
        if (vdev->num >= variant_num) {
-               dev_err(&vdev->dev, "The variant of the card must be specified");
+               dev_err(&vdev->dev, "The variant of the card must be specified\n");
                return 0;
        }
 
@@ -324,7 +324,7 @@ static int pio2_probe(struct vme_dev *vdev)
        retval = pio2_reset_card(card);
        if (retval) {
                dev_err(&card->vdev->dev,
-                       "Failed to reset card, is location valid?");
+                       "Failed to reset card, is location valid?\n");
                retval = -ENODEV;
                goto err_reset;
        }