--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2023, Chukun Pan <amadeus@jmu.edu.cn> */
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Arcadyan AW1000";
+ compatible = "arcadyan,aw1000", "qcom,ipq8074";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ serial0 = &blsp1_uart5;
+ /*
+ * Aliases as required by u-boot
+ * to patch MAC addresses
+ */
+ ethernet0 = &dp1;
+ ethernet1 = &dp2;
+ ethernet2 = &dp3;
+ ethernet3 = &dp4;
+ ethernet4 = &dp6_syn;
+ label-mac-device = &dp1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-append = " root=/dev/ubiblock0_1";
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ lte-pwrkey {
+ gpio-export,name = "lte_pwrkey";
+ gpio-export,output = <1>;
+ gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+ };
+
+ lte-power {
+ gpio-export,name = "lte_power";
+ gpio-export,output = <1>;
+ gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+ };
+
+ lte-reset {
+ gpio-export,name = "lte_reset";
+ gpio-export,output = <1>;
+ gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb-vbus {
+ gpio-export,name = "usb_vbus";
+ gpio-export,output = <0>;
+ gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wlan {
+ label = "wlan";
+ linux,code = <KEY_WLAN>;
+ gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ led-spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+
+ led_gpio: led-gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <2>;
+ spi-max-frequency = <1000000>;
+ enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi {
+ label = "green:wifi";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet {
+ label = "green:internet";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5g-red {
+ label = "red:5g";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ 5g-green {
+ label = "green:5g";
+ gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ 5g-blue {
+ label = "blue:5g";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ signal-red {
+ label = "red:signal";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ signal-green {
+ label = "green:signal";
+ gpios = <&led_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ signal-blue {
+ label = "blue:signal";
+ gpios = <&led_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ phone {
+ label = "green:phone";
+ gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&qusb_phy_0 {
+ status = "okay";
+};
+
+&qusb_phy_1 {
+ status = "okay";
+};
+
+&ssphy_0 {
+ status = "okay";
+};
+
+&ssphy_1 {
+ status = "okay";
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+
+ qca8075_0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ qca8075_1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ qca8075_2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ qca8075_3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ qca8081: ethernet-phy@28 {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <28>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&switch {
+ status = "okay";
+
+ switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
+ switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
+ switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
+ switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
+
+ qcom,port_phyinfo {
+ port@1 {
+ port_id = <1>;
+ phy_address = <0>;
+ };
+ port@2 {
+ port_id = <2>;
+ phy_address = <1>;
+ };
+ port@3 {
+ port_id = <3>;
+ phy_address = <2>;
+ };
+ port@4 {
+ port_id = <4>;
+ phy_address = <3>;
+ };
+ port@6 {
+ port_id = <6>;
+ phy_address = <28>;
+ port_mac_sel = "QGMAC_PORT";
+ };
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&dp1 {
+ status = "okay";
+ phy-handle = <&qca8075_0>;
+ label = "lan1";
+};
+
+&dp2 {
+ status = "okay";
+ phy-handle = <&qca8075_1>;
+ label = "lan2";
+};
+
+&dp3 {
+ status = "okay";
+ phy-handle = <&qca8075_2>;
+ label = "lan3";
+};
+
+&dp4 {
+ status = "okay";
+ phy-handle = <&qca8075_3>;
+ label = "lan4";
+};
+
+&dp6_syn {
+ status = "okay";
+ phy-handle = <&qca8081>;
+ label = "wan";
+};
+
+&wifi {
+ status = "okay";
+
+ qcom,ath11k-calibration-variant = "Arcadyan-AW1000";
+};
projects / openwrt / staging / robimarko.git / commitdiff