ARM: dts: add twi nodes for atmel boards
authorLudovic Desroches <ludovic.desroches@atmel.com>
Wed, 12 Sep 2012 06:42:17 +0000 (08:42 +0200)
committerWolfram Sang <w.sang@pengutronix.de>
Wed, 12 Sep 2012 12:49:16 +0000 (14:49 +0200)
Still use i2c-gpio on boards which have a SoC with a TWI IP which
doesn't have clock stretching in transmission mode.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
arch/arm/boot/dts/at91sam9g25ek.dts
arch/arm/boot/dts/at91sam9m10g45ek.dts
arch/arm/boot/dts/at91sam9n12ek.dts

index 96514c134e54bafd1540c5f55524411b09f1e7a8..877c08f06763c643362eb41b8ebd058ac85abf7d 100644 (file)
                                phy-mode = "rmii";
                                status = "okay";
                        };
+
+                       i2c0: i2c@f8010000 {
+                               status = "okay";
+                       };
+
+                       i2c1: i2c@f8014000 {
+                               status = "okay";
+                       };
+
+                       i2c2: i2c@f8018000 {
+                               status = "okay";
+                       };
                };
 
                usb0: ohci@00600000 {
index a3633bd1311145168f36278afbed6dfe9e6bce76..15e1dd43f625aee627438c302e9a4a13f7002031 100644 (file)
                                phy-mode = "rmii";
                                status = "okay";
                        };
+
+                       i2c0: i2c@fff84000 {
+                               status = "okay";
+                       };
+
+                       i2c1: i2c@fff88000 {
+                               status = "okay";
+                       };
                };
 
                nand0: nand@40000000 {
index f4e43e38f3a19e202fe07d88efb227b4e1d622ef..912b2c283d6f8d34ac7ac8273b8130360547ef81 100644 (file)
                        dbgu: serial@fffff200 {
                                status = "okay";
                        };
+
+                       i2c0: i2c@f8010000 {
+                               status = "okay";
+                       };
+
+                       i2c1: i2c@f8014000 {
+                               status = "okay";
+                       };
                };
 
                nand0: nand@40000000 {