[PATCH] sky2: add MSI support

Add MSI support to sky2 driver.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7e3353f55c38424ff49191b7330ee30cf91d5dd4..2e29972b8d0b8e1189f26e1541c66f0f82243eb3 100644 (file)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -92,6 +92,10 @@ static int copybreak __read_mostly = 256;
 module_param(copybreak, int, 0);
 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
 
+static int disable_msi = 0;
+module_param(disable_msi, int, 0);
+MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
+
 static const struct pci_device_id sky2_id_table[] = {
        { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
        { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
@@ -2045,7 +2049,7 @@ static int sky2_poll(struct net_device *dev0, int *budget)
        struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
        int work_limit = min(dev0->quota, *budget);
        int work_done = 0;
-       u32 status = sky2_read32(hw, B0_ISRC);
+       u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
 
        if (status & Y2_IS_HW_ERR)
                sky2_hw_intr(hw);
@@ -2075,8 +2079,7 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 
        netif_rx_complete(dev0);
 
-       /* Ack interrupt and re-enable */
-       sky2_write32(hw, B0_Y2_SP_ICR, 2);
+       status = sky2_read32(hw, B0_Y2_SP_LISR);
        return 0;
 }
 
@@ -3001,6 +3004,66 @@ static void __devinit sky2_show_addr(struct net_device *dev)
                       dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
 }
 
+/* Handle software interrupt used during MSI test */
+static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id,
+                                           struct pt_regs *regs)
+{
+       struct sky2_hw *hw = dev_id;
+       u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
+
+       if (status == 0)
+               return IRQ_NONE;
+
+       if (status & Y2_IS_IRQ_SW) {
+               hw->msi_detected = 1;
+               wake_up(&hw->msi_wait);
+               sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
+       }
+       sky2_write32(hw, B0_Y2_SP_ICR, 2);
+
+       return IRQ_HANDLED;
+}
+
+/* Test interrupt path by forcing a a software IRQ */
+static int __devinit sky2_test_msi(struct sky2_hw *hw)
+{
+       struct pci_dev *pdev = hw->pdev;
+       int err;
+
+       sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
+
+       err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);
+       if (err) {
+               printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
+                      pci_name(pdev), pdev->irq);
+               return err;
+       }
+
+       init_waitqueue_head (&hw->msi_wait);
+
+       sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
+       wmb();
+
+       wait_event_timeout(hw->msi_wait, hw->msi_detected, HZ/10);
+
+       if (!hw->msi_detected) {
+               /* MSI test failed, go back to INTx mode */
+               printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
+                      "switching to INTx mode. Please report this failure to "
+                      "the PCI maintainer and include system chipset information.\n",
+                      pci_name(pdev));
+
+               err = -EOPNOTSUPP;
+               sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
+       }
+
+       sky2_write32(hw, B0_IMSK, 0);
+
+       free_irq(pdev->irq, hw);
+
+       return err;
+}
+
 static int __devinit sky2_probe(struct pci_dev *pdev,
                                const struct pci_device_id *ent)
 {
@@ -3121,7 +3184,15 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
                }
        }
 
-       err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
+       if (!disable_msi && pci_enable_msi(pdev) == 0) {
+               err = sky2_test_msi(hw);
+               if (err == -EOPNOTSUPP)
+                       pci_disable_msi(pdev);
+               else if (err)
+                       goto err_out_unregister;
+       }
+
+       err = request_irq(pdev->irq,  sky2_intr, SA_SHIRQ, DRV_NAME, hw);
        if (err) {
                printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
                       pci_name(pdev), pdev->irq);
@@ -3135,6 +3206,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
        return 0;
 
 err_out_unregister:
+       pci_disable_msi(pdev);
        if (dev1) {
                unregister_netdev(dev1);
                free_netdev(dev1);
@@ -3177,6 +3249,7 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
        sky2_read8(hw, B0_CTST);
 
        free_irq(pdev->irq, hw);
+       pci_disable_msi(pdev);
        pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
        pci_release_regions(pdev);
        pci_disable_device(pdev);

diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index db362b69b0bb995da0ce180fbb7a9919ebe8f827..50e9f7d38bf3b02e6e15e6b7ff9fd288ea4784c7 100644 (file)
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1879,6 +1879,8 @@ struct sky2_hw {
        struct sky2_status_le *st_le;
        u32                  st_idx;
        dma_addr_t           st_dma;
+       int                  msi_detected;
+       wait_queue_head_t    msi_wait;
 };
 
 /* Register accessor for memory mapped device */