ixgb: don't print error if pci_enable_msi() fails, cleanup minor leak
authorAuke Kok <auke-jan.h.kok@intel.com>
Thu, 17 May 2007 22:29:07 +0000 (15:29 -0700)
committerJeff Garzik <jeff@garzik.org>
Fri, 18 May 2007 00:43:15 +0000 (20:43 -0400)
pci_enable_msi calls can fail for normal operational reasons. Driver
should not print an error message in that case. Fix a leak that leaves
msi enabled if pci_request_irq fails. We can remove CONFIG_PCI_MSI
ifdefs alltogether

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/ixgb/ixgb.h
drivers/net/ixgb/ixgb_main.c

index c8e90861f8694ca5e64c961d195678c22a8f2ee6..3569d5b0338868e0d6be8259f383eda2b7caa493 100644 (file)
@@ -193,8 +193,6 @@ struct ixgb_adapter {
        u16 msg_enable;
        struct ixgb_hw_stats stats;
        uint32_t alloc_rx_buff_failed;
-#ifdef CONFIG_PCI_MSI
        boolean_t have_msi;
-#endif
 };
 #endif /* _IXGB_H_ */
index 6d2b059371f10bcf46fe20d6b343a4d4ee193ec3..991c8833e23c955f02cff9562c2973fbbfe1c205 100644 (file)
@@ -227,7 +227,7 @@ int
 ixgb_up(struct ixgb_adapter *adapter)
 {
        struct net_device *netdev = adapter->netdev;
-       int err;
+       int err, irq_flags = IRQF_SHARED;
        int max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
        struct ixgb_hw *hw = &adapter->hw;
 
@@ -246,26 +246,21 @@ ixgb_up(struct ixgb_adapter *adapter)
        /* disable interrupts and get the hardware into a known state */
        IXGB_WRITE_REG(&adapter->hw, IMC, 0xffffffff);
 
-#ifdef CONFIG_PCI_MSI
-       {
-       boolean_t pcix = (IXGB_READ_REG(&adapter->hw, STATUS) & 
-                                                 IXGB_STATUS_PCIX_MODE) ? TRUE : FALSE;
-       adapter->have_msi = TRUE;
-
-       if (!pcix)
-          adapter->have_msi = FALSE;
-       else if((err = pci_enable_msi(adapter->pdev))) {
-               DPRINTK(PROBE, ERR,
-                "Unable to allocate MSI interrupt Error: %d\n", err);
-               adapter->have_msi = FALSE;
+       /* only enable MSI if bus is in PCI-X mode */
+       if (IXGB_READ_REG(&adapter->hw, STATUS) & IXGB_STATUS_PCIX_MODE) {
+               err = pci_enable_msi(adapter->pdev);
+               if (!err) {
+                       adapter->have_msi = 1;
+                       irq_flags = 0;
+               }
                /* proceed to try to request regular interrupt */
        }
-       }
 
-#endif
-       if((err = request_irq(adapter->pdev->irq, &ixgb_intr,
-                                 IRQF_SHARED | IRQF_SAMPLE_RANDOM,
-                                 netdev->name, netdev))) {
+       err = request_irq(adapter->pdev->irq, &ixgb_intr, irq_flags,
+                         netdev->name, netdev);
+       if (err) {
+               if (adapter->have_msi)
+                       pci_disable_msi(adapter->pdev);
                DPRINTK(PROBE, ERR,
                 "Unable to allocate interrupt Error: %d\n", err);
                return err;
@@ -307,11 +302,10 @@ ixgb_down(struct ixgb_adapter *adapter, boolean_t kill_watchdog)
 
        ixgb_irq_disable(adapter);
        free_irq(adapter->pdev->irq, netdev);
-#ifdef CONFIG_PCI_MSI
-       if(adapter->have_msi == TRUE)
+
+       if (adapter->have_msi)
                pci_disable_msi(adapter->pdev);
 
-#endif
        if(kill_watchdog)
                del_timer_sync(&adapter->watchdog_timer);
 #ifdef CONFIG_IXGB_NAPI