Only for 83xx systems. If specified, then DDR should
be configured using CS0 and CS1 instead of CS2 and CS3.
-- CONFIG_ETHER_ON_FEC[12]
- Define to enable FEC[12] on a 8xx series processor.
-
-- CONFIG_FEC[12]_PHY
- Define to the hardcoded PHY address which corresponds
- to the given FEC; i. e.
- #define CONFIG_FEC1_PHY 4
- means that the PHY with address 4 is connected to FEC1
-
- When set to -1, means to probe for first available.
-
-- CONFIG_FEC[12]_PHY_NORXERR
- The PHY does not have a RXERR line (RMII only).
- (so program the FEC to ignore it).
-
- CONFIG_RMII
Enable RMII mode for all FECs.
Note that this is a global option, we can't
extra-y += traps.o
obj-y += cpu.o
obj-y += cpu_init.o
-obj-y += fec.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_CMD_IMMAP) += immap.o
obj-y += interrupts.o
*/
int cpu_eth_init(bd_t *bis)
{
-#if defined(FEC_ENET)
+#if defined(CONFIG_MPC8XX_FEC)
fec_initialize(bis);
#endif
return 0;
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <commproc.h>
-#include <malloc.h>
-#include <net.h>
-#include <asm/io.h>
-
-#include <phy.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && \
- (defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2))
-
-/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */
-#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2)
-#define CONFIG_ETHER_ON_FEC1 1
-#endif
-
-/* define WANT_MII when MII support is required */
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
-#define WANT_MII
-#else
-#undef WANT_MII
-#endif
-
-#if defined(WANT_MII)
-#include <miiphy.h>
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#endif
-
-#if defined(CONFIG_RMII) && !defined(WANT_MII)
-#error RMII support is unusable without a working PHY.
-#endif
-
-#ifdef CONFIG_SYS_DISCOVER_PHY
-static int mii_discover_phy(struct eth_device *dev);
-#endif
-
-int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg);
-int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
- u16 value);
-
-static struct ether_fcc_info_s
-{
- int ether_index;
- int fecp_offset;
- int phy_addr;
- int actual_phy_addr;
- int initialized;
-}
- ether_fcc_info[] = {
-#if defined(CONFIG_ETHER_ON_FEC1)
- {
- 0,
- offsetof(immap_t, im_cpm.cp_fec1),
-#if defined(CONFIG_FEC1_PHY)
- CONFIG_FEC1_PHY,
-#else
- -1, /* discover */
-#endif
- -1,
- 0,
-
- },
-#endif
-#if defined(CONFIG_ETHER_ON_FEC2)
- {
- 1,
- offsetof(immap_t, im_cpm.cp_fec2),
-#if defined(CONFIG_FEC2_PHY)
- CONFIG_FEC2_PHY,
-#else
- -1,
-#endif
- -1,
- 0,
- },
-#endif
-};
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 100
-
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-#define PKT_MAXBLR_SIZE 1520
-
-#ifdef __GNUC__
-static char txbuf[DBUF_LENGTH] __aligned(8);
-#else
-#error txbuf must be aligned.
-#endif
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * FEC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-struct common_buf_desc {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-};
-
-static struct common_buf_desc __iomem *rtx;
-
-static int fec_send(struct eth_device *dev, void *packet, int length);
-static int fec_recv(struct eth_device *dev);
-static int fec_init(struct eth_device *dev, bd_t *bd);
-static void fec_halt(struct eth_device *dev);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static void __mii_init(void);
-#endif
-
-int fec_initialize(bd_t *bis)
-{
- struct eth_device *dev;
- struct ether_fcc_info_s *efis;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++) {
- dev = malloc(sizeof(*dev));
- if (dev == NULL)
- hang();
-
- memset(dev, 0, sizeof(*dev));
-
- /* for FEC1 make sure that the name of the interface is the same
- as the old one for compatibility reasons */
- if (i == 0)
- strcpy(dev->name, "FEC");
- else
- sprintf(dev->name, "FEC%d",
- ether_fcc_info[i].ether_index + 1);
-
- efis = ðer_fcc_info[i];
-
- /*
- * reset actual phy addr
- */
- efis->actual_phy_addr = -1;
-
- dev->priv = efis;
- dev->init = fec_init;
- dev->halt = fec_halt;
- dev->send = fec_send;
- dev->recv = fec_recv;
-
- eth_register(dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- int retval;
- struct mii_dev *mdiodev = mdio_alloc();
- if (!mdiodev)
- return -ENOMEM;
- strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
- mdiodev->read = fec8xx_miiphy_read;
- mdiodev->write = fec8xx_miiphy_write;
-
- retval = mdio_register(mdiodev);
- if (retval < 0)
- return retval;
-#endif
- }
- return 1;
-}
-
-static int fec_send(struct eth_device *dev, void *packet, int length)
-{
- int j, rc;
- struct ether_fcc_info_s *efis = dev->priv;
- fec_t __iomem *fecp =
- (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- /* section 16.9.23.3
- * Wait for ready
- */
- j = 0;
- while ((in_be16(&rtx->txbd[txIdx].cbd_sc) & BD_ENET_TX_READY) &&
- (j < TOUT_LOOP)) {
- udelay(1);
- j++;
- }
- if (j >= TOUT_LOOP)
- printf("TX not ready\n");
-
- out_be32(&rtx->txbd[txIdx].cbd_bufaddr, (uint)packet);
- out_be16(&rtx->txbd[txIdx].cbd_datlen, length);
- setbits_be16(&rtx->txbd[txIdx].cbd_sc,
- BD_ENET_TX_READY | BD_ENET_TX_LAST);
-
- /* Activate transmit Buffer Descriptor polling */
- /* Descriptor polling active */
- out_be32(&fecp->fec_x_des_active, 0x01000000);
-
- j = 0;
- while ((in_be16(&rtx->txbd[txIdx].cbd_sc) & BD_ENET_TX_READY) &&
- (j < TOUT_LOOP)) {
- udelay(1);
- j++;
- }
- if (j >= TOUT_LOOP)
- printf("TX timeout\n");
-
- /* return only status bits */;
- rc = in_be16(&rtx->txbd[txIdx].cbd_sc) & BD_ENET_TX_STATS;
-
- txIdx = (txIdx + 1) % TX_BUF_CNT;
-
- return rc;
-}
-
-static int fec_recv(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- fec_t __iomem *fecp =
- (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
- int length;
-
- for (;;) {
- /* section 16.9.23.2 */
- if (in_be16(&rtx->rxbd[rxIdx].cbd_sc) & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = in_be16(&rtx->rxbd[rxIdx].cbd_datlen);
-
- if (!(in_be16(&rtx->rxbd[rxIdx].cbd_sc) & 0x003f)) {
- uchar *rx = net_rx_packets[rxIdx];
-
- length -= 4;
-
-#if defined(CONFIG_CMD_CDP)
- if ((rx[0] & 1) != 0 &&
- memcmp((uchar *)rx, net_bcast_ethaddr, 6) != 0 &&
- !is_cdp_packet((uchar *)rx))
- rx = NULL;
-#endif
- /*
- * Pass the packet up to the protocol layers.
- */
- if (rx != NULL)
- net_process_received_packet(rx, length);
- }
-
- /* Give the buffer back to the FEC. */
- out_be16(&rtx->rxbd[rxIdx].cbd_datlen, 0);
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- out_be16(&rtx->rxbd[PKTBUFSRX - 1].cbd_sc,
- BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- } else {
- out_be16(&rtx->rxbd[rxIdx].cbd_sc, BD_ENET_RX_EMPTY);
- rxIdx++;
- }
-
- /* Try to fill Buffer Descriptors */
- /* Descriptor polling active */
- out_be32(&fecp->fec_r_des_active, 0x01000000);
- }
-
- return length;
-}
-
-/**************************************************************
- *
- * FEC Ethernet Initialization Routine
- *
- *************************************************************/
-
-#define FEC_ECNTRL_PINMUX 0x00000004
-#define FEC_ECNTRL_ETHER_EN 0x00000002
-#define FEC_ECNTRL_RESET 0x00000001
-
-#define FEC_RCNTRL_BC_REJ 0x00000010
-#define FEC_RCNTRL_PROM 0x00000008
-#define FEC_RCNTRL_MII_MODE 0x00000004
-#define FEC_RCNTRL_DRT 0x00000002
-#define FEC_RCNTRL_LOOP 0x00000001
-
-#define FEC_TCNTRL_FDEN 0x00000004
-#define FEC_TCNTRL_HBC 0x00000002
-#define FEC_TCNTRL_GTS 0x00000001
-
-#define FEC_RESET_DELAY 50
-
-#if defined(CONFIG_RMII)
-
-static inline void fec_10Mbps(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- int fecidx = efis->ether_index;
- uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
- immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
-
- if ((unsigned int)fecidx >= 2)
- hang();
-
- setbits_be32(&immr->im_cpm.cp_cptr, mask);
-}
-
-static inline void fec_100Mbps(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- int fecidx = efis->ether_index;
- uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
- immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
-
- if ((unsigned int)fecidx >= 2)
- hang();
-
- clrbits_be32(&immr->im_cpm.cp_cptr, mask);
-}
-
-#endif
-
-static inline void fec_full_duplex(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- fec_t __iomem *fecp =
- (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- clrbits_be32(&fecp->fec_r_cntrl, FEC_RCNTRL_DRT);
- setbits_be32(&fecp->fec_x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */
-}
-
-static inline void fec_half_duplex(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- fec_t __iomem *fecp =
- (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- setbits_be32(&fecp->fec_r_cntrl, FEC_RCNTRL_DRT);
- clrbits_be32(&fecp->fec_x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */
-}
-
-static void fec_pin_init(int fecidx)
-{
- bd_t *bd = gd->bd;
- immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
-
- /*
- * Set MII speed to 2.5 MHz or slightly below.
- *
- * According to the MPC860T (Rev. D) Fast ethernet controller user
- * manual (6.2.14),
- * the MII management interface clock must be less than or equal
- * to 2.5 MHz.
- * This MDC frequency is equal to system clock / (2 * MII_SPEED).
- * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
- *
- * All MII configuration is done via FEC1 registers:
- */
- out_be32(&immr->im_cpm.cp_fec1.fec_mii_speed,
- ((bd->bi_intfreq + 4999999) / 5000000) << 1);
-
-#if defined(CONFIG_MPC885) && defined(WANT_MII)
- /* use MDC for MII */
- setbits_be16(&immr->im_ioport.iop_pdpar, 0x0080);
- clrbits_be16(&immr->im_ioport.iop_pddir, 0x0080);
-#endif
-
- if (fecidx == 0) {
-#if defined(CONFIG_ETHER_ON_FEC1)
-
-#if defined(CONFIG_MPC885) /* MPC87x/88x have got 2 FECs and different pinout */
-
-#if !defined(CONFIG_RMII)
-
- setbits_be16(&immr->im_ioport.iop_papar, 0xf830);
- setbits_be16(&immr->im_ioport.iop_padir, 0x0830);
- clrbits_be16(&immr->im_ioport.iop_padir, 0xf000);
-
- setbits_be32(&immr->im_cpm.cp_pbpar, 0x00001001);
- clrbits_be32(&immr->im_cpm.cp_pbdir, 0x00001001);
-
- setbits_be16(&immr->im_ioport.iop_pcpar, 0x000c);
- clrbits_be16(&immr->im_ioport.iop_pcdir, 0x000c);
-
- setbits_be32(&immr->im_cpm.cp_pepar, 0x00000003);
- setbits_be32(&immr->im_cpm.cp_pedir, 0x00000003);
- clrbits_be32(&immr->im_cpm.cp_peso, 0x00000003);
-
- clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000100);
-
-#else
-
-#if !defined(CONFIG_FEC1_PHY_NORXERR)
- setbits_be16(&immr->im_ioport.iop_papar, 0x1000);
- clrbits_be16(&immr->im_ioport.iop_padir, 0x1000);
-#endif
- setbits_be16(&immr->im_ioport.iop_papar, 0xe810);
- setbits_be16(&immr->im_ioport.iop_padir, 0x0810);
- clrbits_be16(&immr->im_ioport.iop_padir, 0xe000);
-
- setbits_be32(&immr->im_cpm.cp_pbpar, 0x00000001);
- clrbits_be32(&immr->im_cpm.cp_pbdir, 0x00000001);
-
- setbits_be32(&immr->im_cpm.cp_cptr, 0x00000100);
- clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000050);
-
-#endif /* !CONFIG_RMII */
-
-#else
- /*
- * Configure all of port D for MII.
- */
- out_be16(&immr->im_ioport.iop_pdpar, 0x1fff);
- out_be16(&immr->im_ioport.iop_pddir, 0x1fff);
-#endif
-
-#endif /* CONFIG_ETHER_ON_FEC1 */
- } else if (fecidx == 1) {
-#if defined(CONFIG_ETHER_ON_FEC2)
-
-#if defined(CONFIG_MPC885) /* MPC87x/88x have got 2 FECs and different pinout */
-
-#if !defined(CONFIG_RMII)
- setbits_be32(&immr->im_cpm.cp_pepar, 0x0003fffc);
- setbits_be32(&immr->im_cpm.cp_pedir, 0x0003fffc);
- clrbits_be32(&immr->im_cpm.cp_peso, 0x000087fc);
- setbits_be32(&immr->im_cpm.cp_peso, 0x00037800);
-
- clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000080);
-#else
-
-#if !defined(CONFIG_FEC2_PHY_NORXERR)
- setbits_be32(&immr->im_cpm.cp_pepar, 0x00000010);
- setbits_be32(&immr->im_cpm.cp_pedir, 0x00000010);
- clrbits_be32(&immr->im_cpm.cp_peso, 0x00000010);
-#endif
- setbits_be32(&immr->im_cpm.cp_pepar, 0x00039620);
- setbits_be32(&immr->im_cpm.cp_pedir, 0x00039620);
- setbits_be32(&immr->im_cpm.cp_peso, 0x00031000);
- clrbits_be32(&immr->im_cpm.cp_peso, 0x00008620);
-
- setbits_be32(&immr->im_cpm.cp_cptr, 0x00000080);
- clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000028);
-#endif /* CONFIG_RMII */
-
-#endif /* CONFIG_MPC885 */
-
-#endif /* CONFIG_ETHER_ON_FEC2 */
- }
-}
-
-static int fec_reset(fec_t __iomem *fecp)
-{
- int i;
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET);
- for (i = 0; (in_be32(&fecp->fec_ecntrl) & FEC_ECNTRL_RESET) &&
- (i < FEC_RESET_DELAY); ++i)
- udelay(1);
-
- if (i == FEC_RESET_DELAY)
- return -1;
-
- return 0;
-}
-
-static int fec_init(struct eth_device *dev, bd_t *bd)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
- fec_t __iomem *fecp =
- (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
- int i;
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- /* the MII interface is connected to FEC1
- * so for the miiphy_xxx function to work we must
- * call mii_init since fec_halt messes the thing up
- */
- if (efis->ether_index != 0)
- __mii_init();
-#endif
-
- if (fec_reset(fecp) < 0)
- printf("FEC_RESET_DELAY timeout\n");
-
- /* We use strictly polling mode only
- */
- out_be32(&fecp->fec_imask, 0);
-
- /* Clear any pending interrupt
- */
- out_be32(&fecp->fec_ievent, 0xffc0);
-
- /* No need to set the IVEC register */
-
- /* Set station address
- */
-#define ea dev->enetaddr
- out_be32(&fecp->fec_addr_low, (ea[0] << 24) | (ea[1] << 16) |
- (ea[2] << 8) | ea[3]);
- out_be16(&fecp->fec_addr_high, (ea[4] << 8) | ea[5]);
-#undef ea
-
-#if defined(CONFIG_CMD_CDP)
- /*
- * Turn on multicast address hash table
- */
- out_be32(&fecp->fec_hash_table_high, 0xffffffff);
- out_be32(&fecp->fec_hash_table_low, 0xffffffff);
-#else
- /* Clear multicast address hash table
- */
- out_be32(&fecp->fec_hash_table_high, 0);
- out_be32(&fecp->fec_hash_table_low, 0);
-#endif
-
- /* Set maximum receive buffer size.
- */
- out_be32(&fecp->fec_r_buff_size, PKT_MAXBLR_SIZE);
-
- /* Set maximum frame length
- */
- out_be32(&fecp->fec_r_hash, PKT_MAXBUF_SIZE);
-
- /*
- * Setup Buffers and Buffer Descriptors
- */
- rxIdx = 0;
- txIdx = 0;
-
- if (!rtx)
- rtx = (struct common_buf_desc __iomem *)
- (immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
- /*
- * Setup Receiver Buffer Descriptors (13.14.24.18)
- * Settings:
- * Empty, Wrap
- */
- for (i = 0; i < PKTBUFSRX; i++) {
- out_be16(&rtx->rxbd[i].cbd_sc, BD_ENET_RX_EMPTY);
- out_be16(&rtx->rxbd[i].cbd_datlen, 0); /* Reset */
- out_be32(&rtx->rxbd[i].cbd_bufaddr, (uint)net_rx_packets[i]);
- }
- setbits_be16(&rtx->rxbd[PKTBUFSRX - 1].cbd_sc, BD_ENET_RX_WRAP);
-
- /*
- * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
- * Settings:
- * Last, Tx CRC
- */
- for (i = 0; i < TX_BUF_CNT; i++) {
- out_be16(&rtx->txbd[i].cbd_sc, BD_ENET_TX_LAST | BD_ENET_TX_TC);
- out_be16(&rtx->txbd[i].cbd_datlen, 0); /* Reset */
- out_be32(&rtx->txbd[i].cbd_bufaddr, (uint)txbuf);
- }
- setbits_be16(&rtx->txbd[TX_BUF_CNT - 1].cbd_sc, BD_ENET_TX_WRAP);
-
- /* Set receive and transmit descriptor base
- */
- out_be32(&fecp->fec_r_des_start, (__force unsigned int)rtx->rxbd);
- out_be32(&fecp->fec_x_des_start, (__force unsigned int)rtx->txbd);
-
- /* Enable MII mode
- */
- /* Half duplex mode */
- out_be32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT);
- out_be32(&fecp->fec_x_cntrl, 0);
-
- /* Enable big endian and don't care about SDMA FC.
- */
- out_be32(&fecp->fec_fun_code, 0x78000000);
-
- /*
- * Setup the pin configuration of the FEC
- */
- fec_pin_init(efis->ether_index);
-
- rxIdx = 0;
- txIdx = 0;
-
- /*
- * Now enable the transmit and receive processing
- */
- out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
-
- if (efis->phy_addr == -1) {
-#ifdef CONFIG_SYS_DISCOVER_PHY
- /*
- * wait for the PHY to wake up after reset
- */
- efis->actual_phy_addr = mii_discover_phy(dev);
-
- if (efis->actual_phy_addr == -1) {
- printf("Unable to discover phy!\n");
- return -1;
- }
-#else
- efis->actual_phy_addr = -1;
-#endif
- } else {
- efis->actual_phy_addr = efis->phy_addr;
- }
-
-#if defined(CONFIG_MII) && defined(CONFIG_RMII)
- /*
- * adapt the RMII speed to the speed of the phy
- */
- if (miiphy_speed(dev->name, efis->actual_phy_addr) == _100BASET)
- fec_100Mbps(dev);
- else
- fec_10Mbps(dev);
-#endif
-
-#if defined(CONFIG_MII)
- /*
- * adapt to the half/full speed settings
- */
- if (miiphy_duplex(dev->name, efis->actual_phy_addr) == FULL)
- fec_full_duplex(dev);
- else
- fec_half_duplex(dev);
-#endif
-
- /* And last, try to fill Rx Buffer Descriptors */
- /* Descriptor polling active */
- out_be32(&fecp->fec_r_des_active, 0x01000000);
-
- efis->initialized = 1;
-
- return 0;
-}
-
-
-static void fec_halt(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- fec_t __iomem *fecp =
- (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
- int i;
-
- /* avoid halt if initialized; mii gets stuck otherwise */
- if (!efis->initialized)
- return;
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET);
- for (i = 0; (in_be32(&fecp->fec_ecntrl) & FEC_ECNTRL_RESET) &&
- (i < FEC_RESET_DELAY); ++i)
- udelay(1);
-
- if (i == FEC_RESET_DELAY) {
- printf("FEC_RESET_DELAY timeout\n");
- return;
- }
-
- efis->initialized = 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-
-/* Make MII read/write commands for the FEC.
-*/
-
-#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18) | \
- (VAL & 0xffff))
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
-#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
-#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
-#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
-#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
-#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
-#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
-#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
-#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
-#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
-
-/* send command to phy using mii, wait for result */
-static uint
-mii_send(uint mii_cmd)
-{
- uint mii_reply;
- fec_t __iomem *ep;
- int cnt;
- immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
-
- ep = &immr->im_cpm.cp_fec;
-
- out_be32(&ep->fec_mii_data, mii_cmd); /* command to phy */
-
- /* wait for mii complete */
- cnt = 0;
- while (!(in_be32(&ep->fec_ievent) & FEC_ENET_MII)) {
- if (++cnt > 1000) {
- printf("mii_send STUCK!\n");
- break;
- }
- }
- mii_reply = in_be32(&ep->fec_mii_data); /* result from phy */
- out_be32(&ep->fec_ievent, FEC_ENET_MII); /* clear MII complete */
- return mii_reply & 0xffff; /* data read from phy */
-}
-#endif
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-static int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
- uint phyno;
- int pass;
- uint phytype;
- int phyaddr;
-
- phyaddr = -1; /* didn't find a PHY yet */
- for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
- if (pass > 1) {
- /* PHY may need more time to recover from reset.
- * The LXT970 needs 50ms typical, no maximum is
- * specified, so wait 10ms before try again.
- * With 11 passes this gives it 100ms to wake up.
- */
- udelay(10000); /* wait 10ms */
- }
- for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
- phytype = mii_send(mk_mii_read(phyno, MII_PHYSID2));
- if (phytype != 0xffff) {
- phyaddr = phyno;
- phytype |= mii_send(mk_mii_read(phyno,
- MII_PHYSID1)) << 16;
- }
- }
- }
- if (phyaddr < 0)
- printf("No PHY device found.\n");
-
- return phyaddr;
-}
-#endif /* CONFIG_SYS_DISCOVER_PHY */
-
-#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
-
-/****************************************************************************
- * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-static void __mii_init(void)
-{
- immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
- fec_t __iomem *fecp = &immr->im_cpm.cp_fec;
-
- if (fec_reset(fecp) < 0)
- printf("FEC_RESET_DELAY timeout\n");
-
- /* We use strictly polling mode only
- */
- out_be32(&fecp->fec_imask, 0);
-
- /* Clear any pending interrupt
- */
- out_be32(&fecp->fec_ievent, 0xffc0);
-
- /* Now enable the transmit and receive processing
- */
- out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
-}
-
-void mii_init(void)
-{
- int i;
-
- __mii_init();
-
- /* Setup the pin configuration of the FEC(s)
- */
- for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++)
- fec_pin_init(ether_fcc_info[i].ether_index);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- * no PHY connected...
- * For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- * Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
-{
- unsigned short value = 0;
- short rdreg; /* register working value */
-
- rdreg = mii_send(mk_mii_read(addr, reg));
-
- value = rdreg;
- return value;
-}
-
-int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
- u16 value)
-{
- (void)mii_send(mk_mii_write(addr, reg, value));
-
- return 0;
-}
-#endif
-
-#endif
This driver implements support for the Ethernet AVB block in
Renesas M3 and H3 SoCs.
+config MPC8XX_FEC
+ bool "Fast Ethernet Controller on MPC8XX"
+ depends on 8xx
+ select MII
+ help
+ This driver implements support for the Fast Ethernet Controller
+ on MPC8XX
+
+config ETHER_ON_FEC1
+ bool "FEC1"
+ depends on MPC8XX_FEC
+ default y
+
+config FEC1_PHY
+ int "FEC1 PHY"
+ depends on ETHER_ON_FEC1
+ default -1
+ help
+ Define to the hardcoded PHY address which corresponds
+ to the given FEC; i. e.
+ #define CONFIG_FEC1_PHY 4
+ means that the PHY with address 4 is connected to FEC1
+
+ When set to -1, means to probe for first available.
+
+config PHY_NORXERR
+ bool "PHY_NORXERR"
+ depends on ETHER_ON_FEC1
+ default n
+ help
+ The PHY does not have a RXERR line (RMII only).
+ (so program the FEC to ignore it).
+
+config ETHER_ON_FEC2
+ bool "FEC2"
+ depends on MPC8XX_FEC && MPC885
+ default y
+
+config FEC2_PHY
+ int "FEC2 PHY"
+ depends on ETHER_ON_FEC2
+ default -1
+ help
+ Define to the hardcoded PHY address which corresponds
+ to the given FEC; i. e.
+ #define CONFIG_FEC1_PHY 4
+ means that the PHY with address 4 is connected to FEC1
+
+ When set to -1, means to probe for first available.
+
+config FEC2_PHY_NORXERR
+ bool "PHY_NORXERR"
+ depends on ETHER_ON_FEC2
+ default n
+ help
+ The PHY does not have a RXERR line (RMII only).
+ (so program the FEC to ignore it).
+
endif # NETDEVICES
obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
+obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o
obj-$(CONFIG_MVGBE) += mvgbe.o
obj-$(CONFIG_MVNETA) += mvneta.o
obj-$(CONFIG_MVPP2) += mvpp2.o
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <commproc.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+
+#include <phy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* define WANT_MII when MII support is required */
+#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
+#define WANT_MII
+#else
+#undef WANT_MII
+#endif
+
+#if defined(WANT_MII)
+#include <miiphy.h>
+
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
+#error "CONFIG_MII has to be defined!"
+#endif
+
+#endif
+
+#if defined(CONFIG_RMII) && !defined(WANT_MII)
+#error RMII support is unusable without a working PHY.
+#endif
+
+#ifdef CONFIG_SYS_DISCOVER_PHY
+static int mii_discover_phy(struct eth_device *dev);
+#endif
+
+int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg);
+int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
+ u16 value);
+
+static struct ether_fcc_info_s
+{
+ int ether_index;
+ int fecp_offset;
+ int phy_addr;
+ int actual_phy_addr;
+ int initialized;
+}
+ ether_fcc_info[] = {
+#if defined(CONFIG_ETHER_ON_FEC1)
+ {
+ 0,
+ offsetof(immap_t, im_cpm.cp_fec1),
+ CONFIG_FEC1_PHY,
+ -1,
+ 0,
+
+ },
+#endif
+#if defined(CONFIG_ETHER_ON_FEC2)
+ {
+ 1,
+ offsetof(immap_t, im_cpm.cp_fec2),
+ CONFIG_FEC2_PHY,
+ -1,
+ 0,
+ },
+#endif
+};
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH 1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 100
+
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+#define PKT_MAXBLR_SIZE 1520
+
+#ifdef __GNUC__
+static char txbuf[DBUF_LENGTH] __aligned(8);
+#else
+#error txbuf must be aligned.
+#endif
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+/*
+ * FEC Ethernet Tx and Rx buffer descriptors allocated at the
+ * immr->udata_bd address on Dual-Port RAM
+ * Provide for Double Buffering
+ */
+
+struct common_buf_desc {
+ cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
+ cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
+};
+
+static struct common_buf_desc __iomem *rtx;
+
+static int fec_send(struct eth_device *dev, void *packet, int length);
+static int fec_recv(struct eth_device *dev);
+static int fec_init(struct eth_device *dev, bd_t *bd);
+static void fec_halt(struct eth_device *dev);
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+static void __mii_init(void);
+#endif
+
+int fec_initialize(bd_t *bis)
+{
+ struct eth_device *dev;
+ struct ether_fcc_info_s *efis;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++) {
+ dev = malloc(sizeof(*dev));
+ if (dev == NULL)
+ hang();
+
+ memset(dev, 0, sizeof(*dev));
+
+ /* for FEC1 make sure that the name of the interface is the same
+ as the old one for compatibility reasons */
+ if (i == 0)
+ strcpy(dev->name, "FEC");
+ else
+ sprintf(dev->name, "FEC%d",
+ ether_fcc_info[i].ether_index + 1);
+
+ efis = ðer_fcc_info[i];
+
+ /*
+ * reset actual phy addr
+ */
+ efis->actual_phy_addr = -1;
+
+ dev->priv = efis;
+ dev->init = fec_init;
+ dev->halt = fec_halt;
+ dev->send = fec_send;
+ dev->recv = fec_recv;
+
+ eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ int retval;
+ struct mii_dev *mdiodev = mdio_alloc();
+ if (!mdiodev)
+ return -ENOMEM;
+ strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
+ mdiodev->read = fec8xx_miiphy_read;
+ mdiodev->write = fec8xx_miiphy_write;
+
+ retval = mdio_register(mdiodev);
+ if (retval < 0)
+ return retval;
+#endif
+ }
+ return 1;
+}
+
+static int fec_send(struct eth_device *dev, void *packet, int length)
+{
+ int j, rc;
+ struct ether_fcc_info_s *efis = dev->priv;
+ fec_t __iomem *fecp =
+ (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
+
+ /* section 16.9.23.3
+ * Wait for ready
+ */
+ j = 0;
+ while ((in_be16(&rtx->txbd[txIdx].cbd_sc) & BD_ENET_TX_READY) &&
+ (j < TOUT_LOOP)) {
+ udelay(1);
+ j++;
+ }
+ if (j >= TOUT_LOOP)
+ printf("TX not ready\n");
+
+ out_be32(&rtx->txbd[txIdx].cbd_bufaddr, (uint)packet);
+ out_be16(&rtx->txbd[txIdx].cbd_datlen, length);
+ setbits_be16(&rtx->txbd[txIdx].cbd_sc,
+ BD_ENET_TX_READY | BD_ENET_TX_LAST);
+
+ /* Activate transmit Buffer Descriptor polling */
+ /* Descriptor polling active */
+ out_be32(&fecp->fec_x_des_active, 0x01000000);
+
+ j = 0;
+ while ((in_be16(&rtx->txbd[txIdx].cbd_sc) & BD_ENET_TX_READY) &&
+ (j < TOUT_LOOP)) {
+ udelay(1);
+ j++;
+ }
+ if (j >= TOUT_LOOP)
+ printf("TX timeout\n");
+
+ /* return only status bits */;
+ rc = in_be16(&rtx->txbd[txIdx].cbd_sc) & BD_ENET_TX_STATS;
+
+ txIdx = (txIdx + 1) % TX_BUF_CNT;
+
+ return rc;
+}
+
+static int fec_recv(struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ fec_t __iomem *fecp =
+ (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
+ int length;
+
+ for (;;) {
+ /* section 16.9.23.2 */
+ if (in_be16(&rtx->rxbd[rxIdx].cbd_sc) & BD_ENET_RX_EMPTY) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
+
+ length = in_be16(&rtx->rxbd[rxIdx].cbd_datlen);
+
+ if (!(in_be16(&rtx->rxbd[rxIdx].cbd_sc) & 0x003f)) {
+ uchar *rx = net_rx_packets[rxIdx];
+
+ length -= 4;
+
+#if defined(CONFIG_CMD_CDP)
+ if ((rx[0] & 1) != 0 &&
+ memcmp((uchar *)rx, net_bcast_ethaddr, 6) != 0 &&
+ !is_cdp_packet((uchar *)rx))
+ rx = NULL;
+#endif
+ /*
+ * Pass the packet up to the protocol layers.
+ */
+ if (rx != NULL)
+ net_process_received_packet(rx, length);
+ }
+
+ /* Give the buffer back to the FEC. */
+ out_be16(&rtx->rxbd[rxIdx].cbd_datlen, 0);
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ out_be16(&rtx->rxbd[PKTBUFSRX - 1].cbd_sc,
+ BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ } else {
+ out_be16(&rtx->rxbd[rxIdx].cbd_sc, BD_ENET_RX_EMPTY);
+ rxIdx++;
+ }
+
+ /* Try to fill Buffer Descriptors */
+ /* Descriptor polling active */
+ out_be32(&fecp->fec_r_des_active, 0x01000000);
+ }
+
+ return length;
+}
+
+/**************************************************************
+ *
+ * FEC Ethernet Initialization Routine
+ *
+ *************************************************************/
+
+#define FEC_ECNTRL_PINMUX 0x00000004
+#define FEC_ECNTRL_ETHER_EN 0x00000002
+#define FEC_ECNTRL_RESET 0x00000001
+
+#define FEC_RCNTRL_BC_REJ 0x00000010
+#define FEC_RCNTRL_PROM 0x00000008
+#define FEC_RCNTRL_MII_MODE 0x00000004
+#define FEC_RCNTRL_DRT 0x00000002
+#define FEC_RCNTRL_LOOP 0x00000001
+
+#define FEC_TCNTRL_FDEN 0x00000004
+#define FEC_TCNTRL_HBC 0x00000002
+#define FEC_TCNTRL_GTS 0x00000001
+
+#define FEC_RESET_DELAY 50
+
+#if defined(CONFIG_RMII)
+
+static inline void fec_10Mbps(struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ int fecidx = efis->ether_index;
+ uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+
+ if ((unsigned int)fecidx >= 2)
+ hang();
+
+ setbits_be32(&immr->im_cpm.cp_cptr, mask);
+}
+
+static inline void fec_100Mbps(struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ int fecidx = efis->ether_index;
+ uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+
+ if ((unsigned int)fecidx >= 2)
+ hang();
+
+ clrbits_be32(&immr->im_cpm.cp_cptr, mask);
+}
+
+#endif
+
+static inline void fec_full_duplex(struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ fec_t __iomem *fecp =
+ (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
+
+ clrbits_be32(&fecp->fec_r_cntrl, FEC_RCNTRL_DRT);
+ setbits_be32(&fecp->fec_x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */
+}
+
+static inline void fec_half_duplex(struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ fec_t __iomem *fecp =
+ (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
+
+ setbits_be32(&fecp->fec_r_cntrl, FEC_RCNTRL_DRT);
+ clrbits_be32(&fecp->fec_x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */
+}
+
+static void fec_pin_init(int fecidx)
+{
+ bd_t *bd = gd->bd;
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+
+ /*
+ * Set MII speed to 2.5 MHz or slightly below.
+ *
+ * According to the MPC860T (Rev. D) Fast ethernet controller user
+ * manual (6.2.14),
+ * the MII management interface clock must be less than or equal
+ * to 2.5 MHz.
+ * This MDC frequency is equal to system clock / (2 * MII_SPEED).
+ * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
+ *
+ * All MII configuration is done via FEC1 registers:
+ */
+ out_be32(&immr->im_cpm.cp_fec1.fec_mii_speed,
+ ((bd->bi_intfreq + 4999999) / 5000000) << 1);
+
+#if defined(CONFIG_MPC885) && defined(WANT_MII)
+ /* use MDC for MII */
+ setbits_be16(&immr->im_ioport.iop_pdpar, 0x0080);
+ clrbits_be16(&immr->im_ioport.iop_pddir, 0x0080);
+#endif
+
+ if (fecidx == 0) {
+#if defined(CONFIG_ETHER_ON_FEC1)
+
+#if defined(CONFIG_MPC885) /* MPC87x/88x have got 2 FECs and different pinout */
+
+#if !defined(CONFIG_RMII)
+
+ setbits_be16(&immr->im_ioport.iop_papar, 0xf830);
+ setbits_be16(&immr->im_ioport.iop_padir, 0x0830);
+ clrbits_be16(&immr->im_ioport.iop_padir, 0xf000);
+
+ setbits_be32(&immr->im_cpm.cp_pbpar, 0x00001001);
+ clrbits_be32(&immr->im_cpm.cp_pbdir, 0x00001001);
+
+ setbits_be16(&immr->im_ioport.iop_pcpar, 0x000c);
+ clrbits_be16(&immr->im_ioport.iop_pcdir, 0x000c);
+
+ setbits_be32(&immr->im_cpm.cp_pepar, 0x00000003);
+ setbits_be32(&immr->im_cpm.cp_pedir, 0x00000003);
+ clrbits_be32(&immr->im_cpm.cp_peso, 0x00000003);
+
+ clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000100);
+
+#else
+
+#if !defined(CONFIG_FEC1_PHY_NORXERR)
+ setbits_be16(&immr->im_ioport.iop_papar, 0x1000);
+ clrbits_be16(&immr->im_ioport.iop_padir, 0x1000);
+#endif
+ setbits_be16(&immr->im_ioport.iop_papar, 0xe810);
+ setbits_be16(&immr->im_ioport.iop_padir, 0x0810);
+ clrbits_be16(&immr->im_ioport.iop_padir, 0xe000);
+
+ setbits_be32(&immr->im_cpm.cp_pbpar, 0x00000001);
+ clrbits_be32(&immr->im_cpm.cp_pbdir, 0x00000001);
+
+ setbits_be32(&immr->im_cpm.cp_cptr, 0x00000100);
+ clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000050);
+
+#endif /* !CONFIG_RMII */
+
+#else
+ /*
+ * Configure all of port D for MII.
+ */
+ out_be16(&immr->im_ioport.iop_pdpar, 0x1fff);
+ out_be16(&immr->im_ioport.iop_pddir, 0x1fff);
+#endif
+
+#endif /* CONFIG_ETHER_ON_FEC1 */
+ } else if (fecidx == 1) {
+#if defined(CONFIG_ETHER_ON_FEC2)
+
+#if defined(CONFIG_MPC885) /* MPC87x/88x have got 2 FECs and different pinout */
+
+#if !defined(CONFIG_RMII)
+ setbits_be32(&immr->im_cpm.cp_pepar, 0x0003fffc);
+ setbits_be32(&immr->im_cpm.cp_pedir, 0x0003fffc);
+ clrbits_be32(&immr->im_cpm.cp_peso, 0x000087fc);
+ setbits_be32(&immr->im_cpm.cp_peso, 0x00037800);
+
+ clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000080);
+#else
+
+#if !defined(CONFIG_FEC2_PHY_NORXERR)
+ setbits_be32(&immr->im_cpm.cp_pepar, 0x00000010);
+ setbits_be32(&immr->im_cpm.cp_pedir, 0x00000010);
+ clrbits_be32(&immr->im_cpm.cp_peso, 0x00000010);
+#endif
+ setbits_be32(&immr->im_cpm.cp_pepar, 0x00039620);
+ setbits_be32(&immr->im_cpm.cp_pedir, 0x00039620);
+ setbits_be32(&immr->im_cpm.cp_peso, 0x00031000);
+ clrbits_be32(&immr->im_cpm.cp_peso, 0x00008620);
+
+ setbits_be32(&immr->im_cpm.cp_cptr, 0x00000080);
+ clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000028);
+#endif /* CONFIG_RMII */
+
+#endif /* CONFIG_MPC885 */
+
+#endif /* CONFIG_ETHER_ON_FEC2 */
+ }
+}
+
+static int fec_reset(fec_t __iomem *fecp)
+{
+ int i;
+
+ /* Whack a reset.
+ * A delay is required between a reset of the FEC block and
+ * initialization of other FEC registers because the reset takes
+ * some time to complete. If you don't delay, subsequent writes
+ * to FEC registers might get killed by the reset routine which is
+ * still in progress.
+ */
+
+ out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET);
+ for (i = 0; (in_be32(&fecp->fec_ecntrl) & FEC_ECNTRL_RESET) &&
+ (i < FEC_RESET_DELAY); ++i)
+ udelay(1);
+
+ if (i == FEC_RESET_DELAY)
+ return -1;
+
+ return 0;
+}
+
+static int fec_init(struct eth_device *dev, bd_t *bd)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+ fec_t __iomem *fecp =
+ (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
+ int i;
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ /* the MII interface is connected to FEC1
+ * so for the miiphy_xxx function to work we must
+ * call mii_init since fec_halt messes the thing up
+ */
+ if (efis->ether_index != 0)
+ __mii_init();
+#endif
+
+ if (fec_reset(fecp) < 0)
+ printf("FEC_RESET_DELAY timeout\n");
+
+ /* We use strictly polling mode only
+ */
+ out_be32(&fecp->fec_imask, 0);
+
+ /* Clear any pending interrupt
+ */
+ out_be32(&fecp->fec_ievent, 0xffc0);
+
+ /* No need to set the IVEC register */
+
+ /* Set station address
+ */
+#define ea dev->enetaddr
+ out_be32(&fecp->fec_addr_low, (ea[0] << 24) | (ea[1] << 16) |
+ (ea[2] << 8) | ea[3]);
+ out_be16(&fecp->fec_addr_high, (ea[4] << 8) | ea[5]);
+#undef ea
+
+#if defined(CONFIG_CMD_CDP)
+ /*
+ * Turn on multicast address hash table
+ */
+ out_be32(&fecp->fec_hash_table_high, 0xffffffff);
+ out_be32(&fecp->fec_hash_table_low, 0xffffffff);
+#else
+ /* Clear multicast address hash table
+ */
+ out_be32(&fecp->fec_hash_table_high, 0);
+ out_be32(&fecp->fec_hash_table_low, 0);
+#endif
+
+ /* Set maximum receive buffer size.
+ */
+ out_be32(&fecp->fec_r_buff_size, PKT_MAXBLR_SIZE);
+
+ /* Set maximum frame length
+ */
+ out_be32(&fecp->fec_r_hash, PKT_MAXBUF_SIZE);
+
+ /*
+ * Setup Buffers and Buffer Descriptors
+ */
+ rxIdx = 0;
+ txIdx = 0;
+
+ if (!rtx)
+ rtx = (struct common_buf_desc __iomem *)
+ (immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
+ /*
+ * Setup Receiver Buffer Descriptors (13.14.24.18)
+ * Settings:
+ * Empty, Wrap
+ */
+ for (i = 0; i < PKTBUFSRX; i++) {
+ out_be16(&rtx->rxbd[i].cbd_sc, BD_ENET_RX_EMPTY);
+ out_be16(&rtx->rxbd[i].cbd_datlen, 0); /* Reset */
+ out_be32(&rtx->rxbd[i].cbd_bufaddr, (uint)net_rx_packets[i]);
+ }
+ setbits_be16(&rtx->rxbd[PKTBUFSRX - 1].cbd_sc, BD_ENET_RX_WRAP);
+
+ /*
+ * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+ * Settings:
+ * Last, Tx CRC
+ */
+ for (i = 0; i < TX_BUF_CNT; i++) {
+ out_be16(&rtx->txbd[i].cbd_sc, BD_ENET_TX_LAST | BD_ENET_TX_TC);
+ out_be16(&rtx->txbd[i].cbd_datlen, 0); /* Reset */
+ out_be32(&rtx->txbd[i].cbd_bufaddr, (uint)txbuf);
+ }
+ setbits_be16(&rtx->txbd[TX_BUF_CNT - 1].cbd_sc, BD_ENET_TX_WRAP);
+
+ /* Set receive and transmit descriptor base
+ */
+ out_be32(&fecp->fec_r_des_start, (__force unsigned int)rtx->rxbd);
+ out_be32(&fecp->fec_x_des_start, (__force unsigned int)rtx->txbd);
+
+ /* Enable MII mode
+ */
+ /* Half duplex mode */
+ out_be32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT);
+ out_be32(&fecp->fec_x_cntrl, 0);
+
+ /* Enable big endian and don't care about SDMA FC.
+ */
+ out_be32(&fecp->fec_fun_code, 0x78000000);
+
+ /*
+ * Setup the pin configuration of the FEC
+ */
+ fec_pin_init(efis->ether_index);
+
+ rxIdx = 0;
+ txIdx = 0;
+
+ /*
+ * Now enable the transmit and receive processing
+ */
+ out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+
+ if (efis->phy_addr == -1) {
+#ifdef CONFIG_SYS_DISCOVER_PHY
+ /*
+ * wait for the PHY to wake up after reset
+ */
+ efis->actual_phy_addr = mii_discover_phy(dev);
+
+ if (efis->actual_phy_addr == -1) {
+ printf("Unable to discover phy!\n");
+ return -1;
+ }
+#else
+ efis->actual_phy_addr = -1;
+#endif
+ } else {
+ efis->actual_phy_addr = efis->phy_addr;
+ }
+
+#if defined(CONFIG_MII) && defined(CONFIG_RMII)
+ /*
+ * adapt the RMII speed to the speed of the phy
+ */
+ if (miiphy_speed(dev->name, efis->actual_phy_addr) == _100BASET)
+ fec_100Mbps(dev);
+ else
+ fec_10Mbps(dev);
+#endif
+
+#if defined(CONFIG_MII)
+ /*
+ * adapt to the half/full speed settings
+ */
+ if (miiphy_duplex(dev->name, efis->actual_phy_addr) == FULL)
+ fec_full_duplex(dev);
+ else
+ fec_half_duplex(dev);
+#endif
+
+ /* And last, try to fill Rx Buffer Descriptors */
+ /* Descriptor polling active */
+ out_be32(&fecp->fec_r_des_active, 0x01000000);
+
+ efis->initialized = 1;
+
+ return 0;
+}
+
+
+static void fec_halt(struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ fec_t __iomem *fecp =
+ (fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
+ int i;
+
+ /* avoid halt if initialized; mii gets stuck otherwise */
+ if (!efis->initialized)
+ return;
+
+ /* Whack a reset.
+ * A delay is required between a reset of the FEC block and
+ * initialization of other FEC registers because the reset takes
+ * some time to complete. If you don't delay, subsequent writes
+ * to FEC registers might get killed by the reset routine which is
+ * still in progress.
+ */
+
+ out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET);
+ for (i = 0; (in_be32(&fecp->fec_ecntrl) & FEC_ECNTRL_RESET) &&
+ (i < FEC_RESET_DELAY); ++i)
+ udelay(1);
+
+ if (i == FEC_RESET_DELAY) {
+ printf("FEC_RESET_DELAY timeout\n");
+ return;
+ }
+
+ efis->initialized = 0;
+}
+
+#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+
+/* Make MII read/write commands for the FEC.
+*/
+
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
+ (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
+ (REG & 0x1f) << 18) | \
+ (VAL & 0xffff))
+
+/* Interrupt events/masks.
+*/
+#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
+#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
+#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
+#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
+#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
+#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
+#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
+#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
+#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
+#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
+
+/* send command to phy using mii, wait for result */
+static uint
+mii_send(uint mii_cmd)
+{
+ uint mii_reply;
+ fec_t __iomem *ep;
+ int cnt;
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+
+ ep = &immr->im_cpm.cp_fec;
+
+ out_be32(&ep->fec_mii_data, mii_cmd); /* command to phy */
+
+ /* wait for mii complete */
+ cnt = 0;
+ while (!(in_be32(&ep->fec_ievent) & FEC_ENET_MII)) {
+ if (++cnt > 1000) {
+ printf("mii_send STUCK!\n");
+ break;
+ }
+ }
+ mii_reply = in_be32(&ep->fec_mii_data); /* result from phy */
+ out_be32(&ep->fec_ievent, FEC_ENET_MII); /* clear MII complete */
+ return mii_reply & 0xffff; /* data read from phy */
+}
+#endif
+
+#if defined(CONFIG_SYS_DISCOVER_PHY)
+static int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+ uint phyno;
+ int pass;
+ uint phytype;
+ int phyaddr;
+
+ phyaddr = -1; /* didn't find a PHY yet */
+ for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+ if (pass > 1) {
+ /* PHY may need more time to recover from reset.
+ * The LXT970 needs 50ms typical, no maximum is
+ * specified, so wait 10ms before try again.
+ * With 11 passes this gives it 100ms to wake up.
+ */
+ udelay(10000); /* wait 10ms */
+ }
+ for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+ phytype = mii_send(mk_mii_read(phyno, MII_PHYSID2));
+ if (phytype != 0xffff) {
+ phyaddr = phyno;
+ phytype |= mii_send(mk_mii_read(phyno,
+ MII_PHYSID1)) << 16;
+ }
+ }
+ }
+ if (phyaddr < 0)
+ printf("No PHY device found.\n");
+
+ return phyaddr;
+}
+#endif /* CONFIG_SYS_DISCOVER_PHY */
+
+#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
+
+/****************************************************************************
+ * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+static void __mii_init(void)
+{
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+ fec_t __iomem *fecp = &immr->im_cpm.cp_fec;
+
+ if (fec_reset(fecp) < 0)
+ printf("FEC_RESET_DELAY timeout\n");
+
+ /* We use strictly polling mode only
+ */
+ out_be32(&fecp->fec_imask, 0);
+
+ /* Clear any pending interrupt
+ */
+ out_be32(&fecp->fec_ievent, 0xffc0);
+
+ /* Now enable the transmit and receive processing
+ */
+ out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+}
+
+void mii_init(void)
+{
+ int i;
+
+ __mii_init();
+
+ /* Setup the pin configuration of the FEC(s)
+ */
+ for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++)
+ fec_pin_init(ether_fcc_info[i].ether_index);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ * no PHY connected...
+ * For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ * Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
+{
+ unsigned short value = 0;
+ short rdreg; /* register working value */
+
+ rdreg = mii_send(mk_mii_read(addr, reg));
+
+ value = rdreg;
+ return value;
+}
+
+int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
+ u16 value)
+{
+ (void)mii_send(mk_mii_write(addr, reg, value));
+
+ return 0;
+}
+#endif
CONFIG_ETHER_ON_FCC1
CONFIG_ETHER_ON_FCC2
CONFIG_ETHER_ON_FCC3
-CONFIG_ETHER_ON_FEC1
-CONFIG_ETHER_ON_FEC2
CONFIG_ETHPRIME
CONFIG_ETH_BUFSIZE
CONFIG_ETH_RXSIZE
CONFIG_FEATURE_SH_EXTRA_QUIET
CONFIG_FEATURE_SH_FANCY_PROMPT
CONFIG_FEATURE_SH_STANDALONE_SHELL
-CONFIG_FEC1_PHY
-CONFIG_FEC2_PHY
CONFIG_FEC_ENET_DEV
CONFIG_FEC_FIXED_SPEED
CONFIG_FEC_MXC_25M_REF_CLK
projects / project / bcm63xx / u-boot.git / commitdiff