i2c: at91: add new driver
authorNikolaus Voss <n.voss@weinmann.de>
Tue, 8 Nov 2011 10:49:46 +0000 (11:49 +0100)
committerWolfram Sang <w.sang@pengutronix.de>
Wed, 12 Sep 2012 12:49:13 +0000 (14:49 +0200)
This driver has the following properties compared to the old driver:
1. Support for multiple interfaces.
2. Interrupt driven I/O as opposed to polling/busy waiting.
3. Support for _one_ repeated start (Sr) condition, which is enough
   for most real-world applications including all SMBus transfer types.
   (The hardware does not support issuing arbitrary Sr conditions on the
    bus.)

testing: SoC: at91sam9g45
 - BQ20Z80 battery SMBus client.
 - on a 2.6.38 kernel with several i2c clients (temp-sensor,
   audio-codec, touchscreen-controller, w1-bridge, io-expanders)

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Tested-by: Hubert Feurstein <h.feurstein@gmail.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
[wsa: squashed with the following patches from Ludovic to have some flaws
fixed:
        i2c: at91: use managed resources
        i2c: at91: add warning about transmission issues for some devices
        i2c: at91: use an id table for SoC dependent parameters
]

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
15 files changed:
arch/arm/mach-at91/at91rm9200.c
arch/arm/mach-at91/at91rm9200_devices.c
arch/arm/mach-at91/at91sam9260.c
arch/arm/mach-at91/at91sam9260_devices.c
arch/arm/mach-at91/at91sam9261.c
arch/arm/mach-at91/at91sam9261_devices.c
arch/arm/mach-at91/at91sam9263.c
arch/arm/mach-at91/at91sam9263_devices.c
arch/arm/mach-at91/at91sam9g45.c
arch/arm/mach-at91/at91sam9g45_devices.c
arch/arm/mach-at91/at91sam9rl.c
arch/arm/mach-at91/at91sam9rl_devices.c
drivers/i2c/busses/Kconfig
drivers/i2c/busses/Makefile
drivers/i2c/busses/i2c-at91.c [new file with mode: 0644]

index f2112f9c18004daf54d20e4e308b8fb5ed6fcfe2..b4f0565aff638af135c7797b430bbfeb2a29b439 100644 (file)
@@ -187,7 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
        CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
        CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
        CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
-       CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk),
+       CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk),
        /* fake hclk clock */
        CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
        CLKDEV_CON_ID("pioA", &pioA_clk),
index 01fb7325fecce0ef9a015835ff846655b3b4af11..0b972f2e57eb22cbfa230b662e22a21628298bf2 100644 (file)
@@ -495,7 +495,7 @@ static struct resource twi_resources[] = {
 };
 
 static struct platform_device at91rm9200_twi_device = {
-       .name           = "at91_i2c",
+       .name           = "i2c-at91rm9200",
        .id             = -1,
        .resource       = twi_resources,
        .num_resources  = ARRAY_SIZE(twi_resources),
index 57c79eed5fd025215846d34d0f95839dd0eb9cc4..5bd19a442365ec41e93665e6b8cc2d741d63d797 100644 (file)
@@ -211,7 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
        CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
        CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
        CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
-       CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk),
+       CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
+       CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk),
        /* more usart lookup table for DT entries */
        CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
        CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
index bce572a530ef2c59946e2f574229d905bbfe041b..95fc23aab4321d0c1ab4d07ad610770cd860e6da 100644 (file)
@@ -503,7 +503,6 @@ static struct resource twi_resources[] = {
 };
 
 static struct platform_device at91sam9260_twi_device = {
-       .name           = "at91_i2c",
        .id             = -1,
        .resource       = twi_resources,
        .num_resources  = ARRAY_SIZE(twi_resources),
@@ -511,6 +510,13 @@ static struct platform_device at91sam9260_twi_device = {
 
 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 {
+       /* IP version is not the same on 9260 and g20 */
+       if (cpu_is_at91sam9g20()) {
+               at91sam9260_twi_device.name = "i2c-at91sam9g20";
+       } else {
+               at91sam9260_twi_device.name = "i2c-at91sam9260";
+       }
+
        /* pins used for TWI interface */
        at91_set_A_periph(AT91_PIN_PA23, 0);            /* TWD */
        at91_set_multi_drive(AT91_PIN_PA23, 1);
index 71ca1e06a16f8102c65773166c353a755aa7c01a..8d999eb1a137f1ed72529d296774c084d17da1a4 100644 (file)
@@ -178,7 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
        CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
        CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
        CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
-       CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk),
+       CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk),
+       CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk),
        CLKDEV_CON_ID("pioA", &pioA_clk),
        CLKDEV_CON_ID("pioB", &pioB_clk),
        CLKDEV_CON_ID("pioC", &pioC_clk),
index bc2590d712d06b214a81171a90c45c9f00ac9252..29188ef7422b3bbbf55ad018ff758eb24bf65273 100644 (file)
@@ -317,7 +317,6 @@ static struct resource twi_resources[] = {
 };
 
 static struct platform_device at91sam9261_twi_device = {
-       .name           = "at91_i2c",
        .id             = -1,
        .resource       = twi_resources,
        .num_resources  = ARRAY_SIZE(twi_resources),
@@ -325,6 +324,13 @@ static struct platform_device at91sam9261_twi_device = {
 
 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 {
+       /* IP version is not the same on 9261 and g10 */
+       if (cpu_is_at91sam9g10()) {
+               at91sam9261_twi_device.name = "i2c-at91sam9g10";
+       } else {
+               at91sam9261_twi_device.name = "i2c-at91sam9261";
+       }
+
        /* pins used for TWI interface */
        at91_set_A_periph(AT91_PIN_PA7, 0);             /* TWD */
        at91_set_multi_drive(AT91_PIN_PA7, 1);
index 2a08305b6571cf5c1e0cd62be2e5e882a66a4fdd..e6b595658e758c6f1fd179bc9bf5d66af9b1c224 100644 (file)
@@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
        CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
        CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
        CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-       CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk),
+       CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
        /* fake hclk clock */
        CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
        CLKDEV_CON_ID("pioA", &pioA_clk),
index 9b6ca734f1a96e6b903f177185fc9d23af2f28e5..3f5288ea64b9b06349dd61f79842f5ad688c1150 100644 (file)
@@ -574,7 +574,7 @@ static struct resource twi_resources[] = {
 };
 
 static struct platform_device at91sam9263_twi_device = {
-       .name           = "at91_i2c",
+       .name           = "i2c-at91sam9260",
        .id             = -1,
        .resource       = twi_resources,
        .num_resources  = ARRAY_SIZE(twi_resources),
index ddf3d3707c5495cfa248c7aec09a05df94863de3..858f032e510297f9b5f4210665f83726ed4756d0 100644 (file)
@@ -237,8 +237,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
        CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
        CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
        CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
-       CLKDEV_CON_DEV_ID(NULL, "at91_i2c.0", &twi0_clk),
-       CLKDEV_CON_DEV_ID(NULL, "at91_i2c.1", &twi1_clk),
+       CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk),
+       CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk),
        CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
        CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
        CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
index 1b47319ca00b1a72e7c8600e4469b5661529f54a..ac1b0f8c3b315e50e6d2d99bc8855b1465b7467d 100644 (file)
@@ -653,7 +653,7 @@ static struct resource twi0_resources[] = {
 };
 
 static struct platform_device at91sam9g45_twi0_device = {
-       .name           = "at91_i2c",
+       .name           = "i2c-at91sam9g10",
        .id             = 0,
        .resource       = twi0_resources,
        .num_resources  = ARRAY_SIZE(twi0_resources),
@@ -673,7 +673,7 @@ static struct resource twi1_resources[] = {
 };
 
 static struct platform_device at91sam9g45_twi1_device = {
-       .name           = "at91_i2c",
+       .name           = "i2c-at91sam9g10",
        .id             = 1,
        .resource       = twi1_resources,
        .num_resources  = ARRAY_SIZE(twi1_resources),
index bf79c1fd5939bc6f1f3cf2300edbd2e3737d7641..72e908412222615134fc0530cc339348093f76be 100644 (file)
@@ -186,8 +186,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
        CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
        CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
        CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-       CLKDEV_CON_DEV_ID(NULL, "at91_i2c.0", &twi0_clk),
-       CLKDEV_CON_DEV_ID(NULL, "at91_i2c.1", &twi1_clk),
+       CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk),
+       CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk),
        CLKDEV_CON_ID("pioA", &pioA_clk),
        CLKDEV_CON_ID("pioB", &pioB_clk),
        CLKDEV_CON_ID("pioC", &pioC_clk),
index b3d365dadef59740154b808fb05c07806f213dab..0794954953e5afb68f8c0e966bd3b06d67716050 100644 (file)
@@ -346,7 +346,7 @@ static struct resource twi_resources[] = {
 };
 
 static struct platform_device at91sam9rl_twi_device = {
-       .name           = "at91_i2c",
+       .name           = "i2c-at91sam9g20",
        .id             = -1,
        .resource       = twi_resources,
        .num_resources  = ARRAY_SIZE(twi_resources),
index b4aaa1bd6728503b629acea078f3021fc148115a..da77c37caf1e39a291044794a4458501eea69120 100644 (file)
@@ -290,18 +290,21 @@ comment "I2C system bus drivers (mostly embedded / system-on-chip)"
 
 config I2C_AT91
        tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
-       depends on ARCH_AT91 && EXPERIMENTAL && BROKEN
+       depends on ARCH_AT91 && EXPERIMENTAL
        help
          This supports the use of the I2C interface on Atmel AT91
          processors.
 
-         This driver is BROKEN because the controller which it uses
-         will easily trigger RX overrun and TX underrun errors.  Using
-         low I2C clock rates may partially work around those issues
-         on some systems.  Another serious problem is that there is no
-         documented way to issue repeated START conditions, as needed
+         A serious problem is that there is no documented way to issue
+         repeated START conditions for more than two messages, as needed
          to support combined I2C messages.  Use the i2c-gpio driver
-         unless your system can cope with those limitations.
+         unless your system can cope with this limitation.
+
+         Caution! at91rm9200, at91sam9261, at91sam9260, at91sam9263 devices
+         don't have clock stretching in transmission mode. For that reason,
+         you can encounter underrun issues causing premature stop sendings if
+         the latency to fill the transmission register is too long. If you
+         are facing this situation, use the i2c-gpio driver.
 
 config I2C_AU1550
        tristate "Au1550/Au1200/Au1300 SMBus interface"
index 4f46873282b88850e2a83c2dde27ebe8de9b0542..ce3c2be7fb40a6cb453a92a9cc1eb89da510383f 100644 (file)
@@ -28,6 +28,7 @@ obj-$(CONFIG_I2C_HYDRA)               += i2c-hydra.o
 obj-$(CONFIG_I2C_POWERMAC)     += i2c-powermac.o
 
 # Embedded system I2C/SMBus host controller drivers
+obj-$(CONFIG_I2C_AT91)         += i2c-at91.o
 obj-$(CONFIG_I2C_AU1550)       += i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
 obj-$(CONFIG_I2C_CPM)          += i2c-cpm.o
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
new file mode 100644 (file)
index 0000000..78bcad0
--- /dev/null
@@ -0,0 +1,505 @@
+/*
+ *  i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+ *
+ *  Copyright (C) 2011 Weinmann Medical GmbH
+ *  Author: Nikolaus Voss <n.voss@weinmann.de>
+ *
+ *  Evolved from original work by:
+ *  Copyright (C) 2004 Rick Bronson
+ *  Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
+ *
+ *  Borrowed heavily from original work by:
+ *  Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define TWI_CLK_HZ             100000                  /* max 400 Kbits/s */
+#define AT91_I2C_TIMEOUT       msecs_to_jiffies(100)   /* transfer timeout */
+
+/* AT91 TWI register definitions */
+#define        AT91_TWI_CR             0x0000  /* Control Register */
+#define        AT91_TWI_START          0x0001  /* Send a Start Condition */
+#define        AT91_TWI_STOP           0x0002  /* Send a Stop Condition */
+#define        AT91_TWI_MSEN           0x0004  /* Master Transfer Enable */
+#define        AT91_TWI_SVDIS          0x0020  /* Slave Transfer Disable */
+#define        AT91_TWI_SWRST          0x0080  /* Software Reset */
+
+#define        AT91_TWI_MMR            0x0004  /* Master Mode Register */
+#define        AT91_TWI_IADRSZ_1       0x0100  /* Internal Device Address Size */
+#define        AT91_TWI_MREAD          0x1000  /* Master Read Direction */
+
+#define        AT91_TWI_IADR           0x000c  /* Internal Address Register */
+
+#define        AT91_TWI_CWGR           0x0010  /* Clock Waveform Generator Reg */
+
+#define        AT91_TWI_SR             0x0020  /* Status Register */
+#define        AT91_TWI_TXCOMP         0x0001  /* Transmission Complete */
+#define        AT91_TWI_RXRDY          0x0002  /* Receive Holding Register Ready */
+#define        AT91_TWI_TXRDY          0x0004  /* Transmit Holding Register Ready */
+
+#define        AT91_TWI_OVRE           0x0040  /* Overrun Error */
+#define        AT91_TWI_UNRE           0x0080  /* Underrun Error */
+#define        AT91_TWI_NACK           0x0100  /* Not Acknowledged */
+
+#define        AT91_TWI_IER            0x0024  /* Interrupt Enable Register */
+#define        AT91_TWI_IDR            0x0028  /* Interrupt Disable Register */
+#define        AT91_TWI_IMR            0x002c  /* Interrupt Mask Register */
+#define        AT91_TWI_RHR            0x0030  /* Receive Holding Register */
+#define        AT91_TWI_THR            0x0034  /* Transmit Holding Register */
+
+struct at91_twi_pdata {
+       unsigned        clk_max_div;
+       unsigned        clk_offset;
+       bool            has_unre_flag;
+};
+
+struct at91_twi_dev {
+       struct device           *dev;
+       void __iomem            *base;
+       struct completion       cmd_complete;
+       struct clk              *clk;
+       u8                      *buf;
+       size_t                  buf_len;
+       struct i2c_msg          *msg;
+       int                     irq;
+       unsigned                transfer_status;
+       struct i2c_adapter      adapter;
+       unsigned                twi_cwgr_reg;
+       struct at91_twi_pdata   *pdata;
+};
+
+static unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg)
+{
+       return readl_relaxed(dev->base + reg);
+}
+
+static void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val)
+{
+       writel_relaxed(val, dev->base + reg);
+}
+
+static void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
+{
+       at91_twi_write(dev, AT91_TWI_IDR,
+                      AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY);
+}
+
+static void at91_init_twi_bus(struct at91_twi_dev *dev)
+{
+       at91_disable_twi_interrupts(dev);
+       at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST);
+       at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN);
+       at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS);
+       at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg);
+}
+
+/*
+ * Calculate symmetric clock as stated in datasheet:
+ * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
+ */
+static void __devinit at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
+{
+       int ckdiv, cdiv, div;
+       struct at91_twi_pdata *pdata = dev->pdata;
+       int offset = pdata->clk_offset;
+       int max_ckdiv = pdata->clk_max_div;
+
+       div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk),
+                                      2 * twi_clk) - offset);
+       ckdiv = fls(div >> 8);
+       cdiv = div >> ckdiv;
+
+       if (ckdiv > max_ckdiv) {
+               dev_warn(dev->dev, "%d exceeds ckdiv max value which is %d.\n",
+                        ckdiv, max_ckdiv);
+               ckdiv = max_ckdiv;
+               cdiv = 255;
+       }
+
+       dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv;
+       dev_dbg(dev->dev, "cdiv %d ckdiv %d\n", cdiv, ckdiv);
+}
+
+static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
+{
+       if (dev->buf_len <= 0)
+               return;
+
+       at91_twi_write(dev, AT91_TWI_THR, *dev->buf);
+
+       /* send stop when last byte has been written */
+       if (--dev->buf_len == 0)
+               at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+
+       dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len);
+
+       ++dev->buf;
+}
+
+static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
+{
+       if (dev->buf_len <= 0)
+               return;
+
+       *dev->buf = at91_twi_read(dev, AT91_TWI_RHR) & 0xff;
+       --dev->buf_len;
+
+       /* handle I2C_SMBUS_BLOCK_DATA */
+       if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) {
+               dev->msg->flags &= ~I2C_M_RECV_LEN;
+               dev->buf_len += *dev->buf;
+               dev->msg->len = dev->buf_len + 1;
+               dev_dbg(dev->dev, "received block length %d\n", dev->buf_len);
+       }
+
+       /* send stop if second but last byte has been read */
+       if (dev->buf_len == 1)
+               at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+
+       dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len);
+
+       ++dev->buf;
+}
+
+static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
+{
+       struct at91_twi_dev *dev = dev_id;
+       const unsigned status = at91_twi_read(dev, AT91_TWI_SR);
+       const unsigned irqstatus = status & at91_twi_read(dev, AT91_TWI_IMR);
+
+       if (!irqstatus)
+               return IRQ_NONE;
+       else if (irqstatus & AT91_TWI_RXRDY)
+               at91_twi_read_next_byte(dev);
+       else if (irqstatus & AT91_TWI_TXRDY)
+               at91_twi_write_next_byte(dev);
+
+       /* catch error flags */
+       dev->transfer_status |= status;
+
+       if (irqstatus & AT91_TWI_TXCOMP) {
+               at91_disable_twi_interrupts(dev);
+               complete(&dev->cmd_complete);
+       }
+
+       return IRQ_HANDLED;
+}
+
+static int at91_do_twi_transfer(struct at91_twi_dev *dev)
+{
+       int ret;
+       bool has_unre_flag = dev->pdata->has_unre_flag;
+
+       dev_dbg(dev->dev, "transfer: %s %d bytes.\n",
+               (dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
+
+       INIT_COMPLETION(dev->cmd_complete);
+       dev->transfer_status = 0;
+       if (dev->msg->flags & I2C_M_RD) {
+               unsigned start_flags = AT91_TWI_START;
+
+               if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) {
+                       dev_err(dev->dev, "RXRDY still set!");
+                       at91_twi_read(dev, AT91_TWI_RHR);
+               }
+
+               /* if only one byte is to be read, immediately stop transfer */
+               if (dev->buf_len <= 1 && !(dev->msg->flags & I2C_M_RECV_LEN))
+                       start_flags |= AT91_TWI_STOP;
+               at91_twi_write(dev, AT91_TWI_CR, start_flags);
+               at91_twi_write(dev, AT91_TWI_IER,
+                              AT91_TWI_TXCOMP | AT91_TWI_RXRDY);
+       } else {
+               at91_twi_write_next_byte(dev);
+               at91_twi_write(dev, AT91_TWI_IER,
+                              AT91_TWI_TXCOMP | AT91_TWI_TXRDY);
+       }
+
+       ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
+                                                       dev->adapter.timeout);
+       if (ret == 0) {
+               dev_err(dev->dev, "controller timed out\n");
+               at91_init_twi_bus(dev);
+               return -ETIMEDOUT;
+       }
+       if (dev->transfer_status & AT91_TWI_NACK) {
+               dev_dbg(dev->dev, "received nack\n");
+               return -EREMOTEIO;
+       }
+       if (dev->transfer_status & AT91_TWI_OVRE) {
+               dev_err(dev->dev, "overrun while reading\n");
+               return -EIO;
+       }
+       if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) {
+               dev_err(dev->dev, "underrun while writing\n");
+               return -EIO;
+       }
+       dev_dbg(dev->dev, "transfer complete\n");
+
+       return 0;
+}
+
+static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
+{
+       struct at91_twi_dev *dev = i2c_get_adapdata(adap);
+       int ret;
+       unsigned int_addr_flag = 0;
+       struct i2c_msg *m_start = msg;
+
+       dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
+
+       /*
+        * The hardware can handle at most two messages concatenated by a
+        * repeated start via it's internal address feature.
+        */
+       if (num > 2) {
+               dev_err(dev->dev,
+                       "cannot handle more than two concatenated messages.\n");
+               return 0;
+       } else if (num == 2) {
+               int internal_address = 0;
+               int i;
+
+               if (msg->flags & I2C_M_RD) {
+                       dev_err(dev->dev, "first transfer must be write.\n");
+                       return -EINVAL;
+               }
+               if (msg->len > 3) {
+                       dev_err(dev->dev, "first message size must be <= 3.\n");
+                       return -EINVAL;
+               }
+
+               /* 1st msg is put into the internal address, start with 2nd */
+               m_start = &msg[1];
+               for (i = 0; i < msg->len; ++i) {
+                       const unsigned addr = msg->buf[msg->len - 1 - i];
+
+                       internal_address |= addr << (8 * i);
+                       int_addr_flag += AT91_TWI_IADRSZ_1;
+               }
+               at91_twi_write(dev, AT91_TWI_IADR, internal_address);
+       }
+
+       at91_twi_write(dev, AT91_TWI_MMR, (m_start->addr << 16) | int_addr_flag
+                      | ((m_start->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0));
+
+       dev->buf_len = m_start->len;
+       dev->buf = m_start->buf;
+       dev->msg = m_start;
+
+       ret = at91_do_twi_transfer(dev);
+
+       return (ret < 0) ? ret : num;
+}
+
+static u32 at91_twi_func(struct i2c_adapter *adapter)
+{
+       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+               | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+}
+
+static struct i2c_algorithm at91_twi_algorithm = {
+       .master_xfer    = at91_twi_xfer,
+       .functionality  = at91_twi_func,
+};
+
+static struct at91_twi_pdata at91rm9200_config = {
+       .clk_max_div = 5,
+       .clk_offset = 3,
+       .has_unre_flag = true,
+};
+
+static struct at91_twi_pdata at91sam9261_config = {
+       .clk_max_div = 5,
+       .clk_offset = 4,
+       .has_unre_flag = false,
+};
+
+static struct at91_twi_pdata at91sam9260_config = {
+       .clk_max_div = 7,
+       .clk_offset = 4,
+       .has_unre_flag = false,
+};
+
+static struct at91_twi_pdata at91sam9g20_config = {
+       .clk_max_div = 7,
+       .clk_offset = 4,
+       .has_unre_flag = false,
+};
+
+static struct at91_twi_pdata at91sam9g10_config = {
+       .clk_max_div = 7,
+       .clk_offset = 4,
+       .has_unre_flag = false,
+};
+
+static const struct platform_device_id at91_twi_devtypes[] = {
+       {
+               .name = "i2c-at91rm9200",
+               .driver_data = (unsigned long) &at91rm9200_config,
+       }, {
+               .name = "i2c-at91sam9261",
+               .driver_data = (unsigned long) &at91sam9261_config,
+       }, {
+               .name = "i2c-at91sam9260",
+               .driver_data = (unsigned long) &at91sam9260_config,
+       }, {
+               .name = "i2c-at91sam9g20",
+               .driver_data = (unsigned long) &at91sam9g20_config,
+       }, {
+               .name = "i2c-at91sam9g10",
+               .driver_data = (unsigned long) &at91sam9g10_config,
+       }, {
+               /* sentinel */
+       }
+};
+
+static int __devinit at91_twi_probe(struct platform_device *pdev)
+{
+       struct at91_twi_dev *dev;
+       struct resource *mem;
+       int rc;
+
+       dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+       if (!dev)
+               return -ENOMEM;
+       init_completion(&dev->cmd_complete);
+       dev->dev = &pdev->dev;
+
+       mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!mem)
+               return -ENODEV;
+
+       dev->pdata = at91_twi_get_driver_data(pdev);
+       if (!dev->pdata)
+               return -ENODEV;
+
+       dev->base = devm_request_and_ioremap(&pdev->dev, mem);
+       if (!dev->base)
+               return -EBUSY;
+
+       dev->irq = platform_get_irq(pdev, 0);
+       if (dev->irq < 0)
+               return dev->irq;
+
+       rc = devm_request_irq(&pdev->dev, dev->irq, atmel_twi_interrupt, 0,
+                        dev_name(dev->dev), dev);
+       if (rc) {
+               dev_err(dev->dev, "Cannot get irq %d: %d\n", dev->irq, rc);
+               return rc;
+       }
+
+       platform_set_drvdata(pdev, dev);
+
+       dev->clk = devm_clk_get(dev->dev, NULL);
+       if (IS_ERR(dev->clk)) {
+               dev_err(dev->dev, "no clock defined\n");
+               return -ENODEV;
+       }
+       clk_prepare_enable(dev->clk);
+
+       at91_calc_twi_clock(dev, TWI_CLK_HZ);
+       at91_init_twi_bus(dev);
+
+       snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
+       i2c_set_adapdata(&dev->adapter, dev);
+       dev->adapter.owner = THIS_MODULE;
+       dev->adapter.class = I2C_CLASS_HWMON;
+       dev->adapter.algo = &at91_twi_algorithm;
+       dev->adapter.dev.parent = dev->dev;
+       dev->adapter.nr = pdev->id;
+       dev->adapter.timeout = AT91_I2C_TIMEOUT;
+
+       rc = i2c_add_numbered_adapter(&dev->adapter);
+       if (rc) {
+               dev_err(dev->dev, "Adapter %s registration failed\n",
+                       dev->adapter.name);
+               clk_disable_unprepare(dev->clk);
+               return rc;
+       }
+
+       dev_info(dev->dev, "AT91 i2c bus driver.\n");
+       return 0;
+}
+
+static int __devexit at91_twi_remove(struct platform_device *pdev)
+{
+       struct at91_twi_dev *dev = platform_get_drvdata(pdev);
+       int rc;
+
+       rc = i2c_del_adapter(&dev->adapter);
+       clk_disable_unprepare(dev->clk);
+
+       return rc;
+}
+
+#ifdef CONFIG_PM
+
+static int at91_twi_runtime_suspend(struct device *dev)
+{
+       struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+       clk_disable(twi_dev->clk);
+
+       return 0;
+}
+
+static int at91_twi_runtime_resume(struct device *dev)
+{
+       struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+       return clk_enable(twi_dev->clk);
+}
+
+static const struct dev_pm_ops at91_twi_pm = {
+       .runtime_suspend        = at91_twi_runtime_suspend,
+       .runtime_resume         = at91_twi_runtime_resume,
+};
+
+#define at91_twi_pm_ops (&at91_twi_pm)
+#else
+#define at91_twi_pm_ops NULL
+#endif
+
+static struct platform_driver at91_twi_driver = {
+       .probe          = at91_twi_probe,
+       .remove         = __devexit_p(at91_twi_remove),
+       .id_table       = at91_twi_devtypes,
+       .driver         = {
+               .name   = "at91_i2c",
+               .owner  = THIS_MODULE,
+               .pm     = at91_twi_pm_ops,
+       },
+};
+
+static int __init at91_twi_init(void)
+{
+       return platform_driver_register(&at91_twi_driver);
+}
+
+static void __exit at91_twi_exit(void)
+{
+       platform_driver_unregister(&at91_twi_driver);
+}
+
+subsys_initcall(at91_twi_init);
+module_exit(at91_twi_exit);
+
+MODULE_AUTHOR("Nikolaus Voss <n.voss@weinmann.de>");
+MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_i2c");